Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/xilinx_zynqmp_virt_defconfig

213 lines
5.6 KiB
Text
Raw Normal View History

arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ARM=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_POSITION_INDEPENDENT=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x4040000
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 17:50:32 +00:00
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
xilinx: zynqmp: Enable stack relocation to DDR There is no space in OCM for SPL stack because the space in OCM is occupied by TF-A. That's why move relocate stack to DDR to 0x18000000 address and also enable SPL_SIZE_LIMIT not to be more then 0xfffea000 which is default address for TFA. It is good to summarize current DDR usage in SPL flow. 0-0x80000 is used for BSS (CONFIG_SPL_BSS_START_ADDR, CONFIG_SPL_BSS_MAX_SIZE) 0x100000 is used for DTB passing address (CONFIG_XILINX_OF_BOARD_DTB_ADDR) 0x17fffe70 - CONFIG_SPL_STACK_R_ADDR - is used for GD 0x18000000 is used for SPL stack (CONFIG_SPL_STACK_R_ADDR) 0x20000000-0x21000000 is used for SPL malloc area (CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-24 12:56:47 +00:00
CONFIG_SPL_STACK_R_ADDR=0x18000000
CONFIG_SPL_SIZE_LIMIT=0x2a000
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
CONFIG_SPL_SPI=y
xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig There is no reason to have ZYNQ specific Kconfig macro in generic location to be visible for all other SoCs. That's why move it to Xilinx common location to be visible only for us. Also introduce new bool entry ZYNQ_MAC_IN_EEPROM to have also an option to disable it or enable. This has connection to code which is reading the whole content of i2c and also work with the rest of date not just with MAC address. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-14 15:08:14 +00:00
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
xilinx: Enable FRU command for all ARM based platforms Enable it by default for board detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-22 08:33:29 +00:00
CONFIG_CMD_FRU=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ZYNQMP_USB=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 15:25:30 +00:00
CONFIG_REMAKE_ELF=y
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x8000000
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigs Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 07:35:01 +00:00
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
xilinx: Disable ARCH_FIXUP_FDT_MEMORY Based on DT spec you can have one memory node which multiple ranges or multiple nodes. fdt_fixup_memory_banks() is not implemented in a correct way when multiple memory nodes are present because all ranges are put it to the first memory node found. And next memory nodes are kept in DT which ends up in the same range specification in the same DT. Here is what it is happening. Origin DT. memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; memory@800000000 { device_type = "memory"; reg = <0x8 0x00000000 0x0 0x80000000>; }; After fdt_fixup_memory_banks() memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; memory@800000000 { device_type = "memory"; reg = <0x8 0x00000000 0x0 0x80000000>; }; As is visible memory@0 node got second range but there is still memory@800000000 node present and 2G range is listed twice. The solution can't be that second node is removed because it can be referenced already that's why it is better for us to disable this option for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 12:09:32 +00:00
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
xilinx: Enable preboot feature for ZynqMP and Versal Enable preboot functionality for ZynqMP and Versal platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-18 12:15:01 +00:00
CONFIG_USE_PREBOOT=y
xilinx: zynqmp: Initialize usb and scsi via preboot Based on thread https://lists.denx.de/pipermail/u-boot/2021-June/451828.html especially "Overall we have a deficiency in the UEFI implementation in that we cannot deal with block devices added or removed after initialization." there is a need to deal with removable media as usb/scsi/sata. That's why bridge this gap in EFI implementation by resetting usb and scsi resets to get all disks before efi_init_obj_list() is called. In our standard boot flow, where we use distro boot, order is fixed as "jtag mmc0 mmc1 qspi0 nand0 usb0 usb1 scsi0 pxe dhcp" with prioritizing boot device added by commit 2882b39d564b ("arm64: zynqmp: Setup the first boot_target at run time"). When device has ESP partition all devices should be detected because then efi_disk_register() in efi_init_obj_list() is called only once. The first such a device is sd/emmc(mmc0/mmc1) and then disks on usb/sata are not handled at all. The commit 6bb577dbb30f ("arm64: zynqmp: Disable EFI_CAPSULE_ON_DISK_EARLY") also pointed out on this issue but detection of removable media wasn't solved that's why do it now via preboot command. I have tested cases without usb and scsi and there is no problem with calling resets without devices itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-29 12:22:05 +00:00
CONFIG_PREBOOT="run scsi_init;usb start"
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_BOARD_EARLY_INIT_R=y
xilinx: zynqmp: Enable stack relocation to DDR There is no space in OCM for SPL stack because the space in OCM is occupied by TF-A. That's why move relocate stack to DDR to 0x18000000 address and also enable SPL_SIZE_LIMIT not to be more then 0xfffea000 which is default address for TFA. It is good to summarize current DDR usage in SPL flow. 0-0x80000 is used for BSS (CONFIG_SPL_BSS_START_ADDR, CONFIG_SPL_BSS_MAX_SIZE) 0x100000 is used for DTB passing address (CONFIG_XILINX_OF_BOARD_DTB_ADDR) 0x17fffe70 - CONFIG_SPL_STACK_R_ADDR - is used for GD 0x18000000 is used for SPL stack (CONFIG_SPL_STACK_R_ADDR) 0x20000000-0x21000000 is used for SPL malloc area (CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-24 12:56:47 +00:00
CONFIG_SPL_STACK_R=y
arm64: zynqmp: Enable FPGA loading from SPL fpga bitstream needs to be listed in config node in FIT image. Only tested option is bitstream in BIN format. Enabling this feature increase code size by almost 4k. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-05 13:43:44 +00:00
CONFIG_SPL_FPGA=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SPL_SPI_LOAD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 16:40:24 +00:00
CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPL_ATF=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTMENU=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_THOR_DOWNLOAD=y
xilinx: Enable GUID partitions and EFI variable commands For work with EFI it is good to have GUID partitions enabled and also option to work with UEFI variables. That's why enable both. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-01 10:35:42 +00:00
CONFIG_CMD_NVEDIT_EFI=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
arm64: zynqmp: Enable sha1sum command Enable it for TPM usage. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-12-04 09:37:38 +00:00
CONFIG_CMD_SHA1SUM=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_CMD_BIND=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_FPGA_LOAD_SECURE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
xilinx: Enable MTD and UBIFS for zynq and zynqmp Both of them have nand controller that's why it is good to enable it because these configurations are also covered by testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-08 08:37:51 +00:00
CONFIG_CMD_MTD=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_POWEROFF=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_SDRAM=y
xilinx: Enable SF_TEST command for all ARM based platforms Enable this command by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-22 08:34:43 +00:00
CONFIG_CMD_SF_TEST=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_CMD_SPI=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_USB=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
arm64: zynqmp: Enable WDT command Enable watchdog command to be able to work with watchdogs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-28 09:18:43 +00:00
CONFIG_CMD_WDT=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_TFTPPUT=y
arm64: zynqmp: Enable seps and related video configs Enable this driver to get build and probe for our platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
2021-01-07 13:05:23 +00:00
CONFIG_CMD_BMP=y
arm64: zynqmp: Enable cache command Sometimes it is very useful to be able disable/enable cache that's why enable commands for it by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-07 13:41:21 +00:00
CONFIG_CMD_CACHE=y
xilinx: Enable efi debug command Enable EFI debug command to be able to setup various efi variables to avoid software like grub. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-26 10:16:24 +00:00
CONFIG_CMD_EFIDEBUG=y
xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver Enable RTC command to be able to check available. And also enable ZynqMP RTC driver to be possible to use by default. Here is the list when both drivers are enabled: ZynqMP> rtc list RTC #0 - rtc_emul RTC #1 - rtc@ffa60000 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-29 09:42:11 +00:00
CONFIG_CMD_RTC=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_TIME=y
xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settime Right now U-Boot is not aware about date/time that's why enable it by default also with EFI runtime service for setting time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-12 08:03:44 +00:00
CONFIG_CMD_GETTIME=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_TIMER=y
zynqmp: Enable regulators Enable command and fixed regulators. XDP platform is using them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-31 08:38:30 +00:00
CONFIG_CMD_REGULATOR=y
arm64: zynqmp: Enable TPM for xilinx platforms TPMs are becoming popular that's why enable drivers and command for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-09 14:46:57 +00:00
CONFIG_CMD_TPM=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CMD_EXT4_WRITE=y
xilinx: Enable MTD and UBIFS for zynq and zynqmp Both of them have nand controller that's why it is good to enable it because these configurations are also covered by testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-08 08:37:51 +00:00
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
xilinx: Enable GUID partitions and EFI variable commands For work with EFI it is good to have GUID partitions enabled and also option to work with UEFI variables. That's why enable both. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-01 10:35:42 +00:00
CONFIG_PARTITION_TYPE_GUID=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPL_OF_CONTROL=y
xilinx: Enable OF_BOARD for zynq and zynqmp boards The commit 985503439762 ("fdt: Don't call board_fdt_blob_setup() without OF_BOARD") forced to enable OF_BOARD for platforms which provide DT externally. Zynq/ZynqMP boards are using this feature for a long time that's why there is a need to enable it by default. Also code expects to return error in case of error that's why also fill it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9f11bbffe2849f4da7d72712082d579262fe8fd8.1645104518.git.michal.simek@xilinx.com
2022-02-17 13:28:38 +00:00
CONFIG_OF_BOARD=y
arm64: zynqmp: Add support for DLC21 (Smartlynq+) board DLC21 is used as fast jtag cable. The patch adds support for this board from PS perspective. The most interesting part on the board is seps525 oled display. Also i2c, gpio, ethernet, uart, SD and eMMC are tested. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3d35cd6a11cffc7456e21a88b214cc965734e852.1634231268.git.michal.simek@xilinx.com
2021-10-14 17:07:52 +00:00
CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA"
arm64: zynqmp: Get rid of iommus/power-domains properties for SPL DT SPL DT contains only nodes which are contain u-boot,dm-pre-reloc property. iommu node is not this case that's why when DT is read DTC reports some warnings. $ dtc -I dtb -O dts dts/dt-spl.dtb >/dev/null <stdout>: Warning (iommus_property): /amba/spi@ff0f0000:iommus: Could not get phandle node for (cell 0) <stdout>: Warning (iommus_property): /amba/mmc@ff160000:iommus: Could not get phandle node for (cell 0) <stdout>: Warning (iommus_property): /amba/mmc@ff170000:iommus: Could not get phandle node for (cell 0) SPL also has an option to remove some DT properties which are useless for SPL to make DT even smaller. Default DT properties are pinctrl-0 pinctrl-names interrupt-parent interrupts which are already removed. The patch extends this list with iommus to get rid of above warnings. Also power-domains unused properties can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-07 13:53:39 +00:00
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
xilinx: zynqmp: Add support for saving variables Enabling saving variables to MMC(FAT), NAND, SPI based on primary bootmode. Maybe that logic can be tuned for more complicated use cases and better tested for different bootmodes. Tested on zcu104 to SD(FAT) and JTAG(NOWHERE). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-07-30 11:37:49 +00:00
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
xilinx: Enable redundant variable handling Enable this feature by default to be able to work with env import/export commands which are done in this slightly changed variable format (There is addtional flag fields in variable file which is changing CRC calculation). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-24 09:44:20 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
arm64: zynqmp: Handle MMC seq number based on boot device K26 has EMMC and SD and default 0 is not working when system is booting out of SD which is controller 1. Add controller autodetection via mmc_get_env_dev(). The same code is used for distro_boot selection done in board_late_init(). bootseq variable can't be reused because this is called so late. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 13:16:19 +00:00
CONFIG_ENV_FAT_DEVICE_AND_PART=":auto"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
arm64: zynqmp: Enable netconsole for ZynqMP It is nice feature Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-18 08:19:02 +00:00
CONFIG_NETCONSOLE=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPL_DM_SEQ_ALIAS=y
sata: Rearrange Kconfig for SATA Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 14:49:33 +00:00
CONFIG_SATA=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-08 23:50:55 +00:00
CONFIG_SCSI_AHCI=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SATA_CEVA=y
xilinx: zynqmp: Enable gpio-key/button driver Enable button uclass and also gpio-key driver by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-21 13:02:30 +00:00
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_CLK_ZYNQMP=y
xilinx: zynqmp: Enable DFU tftp support Enable DFU tftp support for firmware update. Fill dfu_ram_tftp variable to have command present for showing how to use it. boot FIT image has been created from below fragment. Key part is that type of image has to be firmware. Also based on experiment load property is completely ignored and base addresses are taken from dfu_alt_info variable. $ cat update_uboot.its /dts-v1/; / { description = "Automatic U-Boot update"; #address-cells = <1>; images { Image { description = "Kernel"; data = /incbin/("/tftpboot/Image"); compression = "none"; arch = "arm64"; type = "firmware"; os = "linux"; load = <0x80000>; entry = <0x80000>; hash-1 { algo = "sha1"; }; }; system.dtb { description = "DTB"; data = /incbin/("/tftpboot/system.dtb"); compression = "none"; arch = "arm64"; type = "firmware"; load = <0>; hash-1 { algo = "sha1"; }; }; }; }; $ mkimage -f update_uboot.its /tftpboot/boot When U-Boot starts get IP address and server IP. dhcp setenv serverip 192.168.0.105 And then run prepared command. run dfu_ram_tftp Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-07-15 12:20:34 +00:00
CONFIG_DFU_TFTP=y
xilinx: zynqmp: Add usb dfu/thor distro boot support In usb boot mode distro boot should select usb device as primary boot device instead of usb host. So make usb dfu as primary boot device. But do not list it in boot_targets as fallback option because it is not classic mode for booting. Using 60s timeout by default should be enough time for dfu-utils to start transaction. In case none needs this please change timeout value in the command or disable CONFIG_DFU_TIMEOUT. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-25 05:37:57 +00:00
CONFIG_DFU_TIMEOUT=y
arm64: zynqmp: Enable capsule update Enable EFI capsule update features to be enabled by default also with all dfu valid options for ZynqMP. This feature was tested on Xilinx ZynqMP zcu104 board with defining dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1" and dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000 0x500000". There is a need to increase malloc size for getting dfu mmc to work. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: Sughosh Ganu <sughosh.ganu@linaro.org> CC: Ilias Apalodimas <ilias.apalodimas@linaro.org> CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-26 06:27:04 +00:00
CONFIG_DFU_MMC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_DFU_MTD=y
arm64: zynqmp: Enable capsule update Enable EFI capsule update features to be enabled by default also with all dfu valid options for ZynqMP. This feature was tested on Xilinx ZynqMP zcu104 board with defining dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1" and dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000 0x500000". There is a need to increase malloc size for getting dfu mmc to work. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: Sughosh Ganu <sughosh.ganu@linaro.org> CC: Ilias Apalodimas <ilias.apalodimas@linaro.org> CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-26 06:27:04 +00:00
CONFIG_DFU_NAND=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_DFU_RAM=y
arm64: zynqmp: Enable capsule update Enable EFI capsule update features to be enabled by default also with all dfu valid options for ZynqMP. This feature was tested on Xilinx ZynqMP zcu104 board with defining dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1" and dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000 0x500000". There is a need to increase malloc size for getting dfu mmc to work. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: Sughosh Ganu <sughosh.ganu@linaro.org> CC: Ilias Apalodimas <ilias.apalodimas@linaro.org> CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-26 06:27:04 +00:00
CONFIG_DFU_SF=y
xilinx: zynqmp: Add support for runtime dfu_alt_info setup The main reason for this to be implemented is capsule update. Two memories are supported and tested which is MMC FAT based and QSPI based. For creating capsule these commands are used: ./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin ./tools/mkeficapsule --raw u-boot.itb --index 2 capsule2.bin Then transfer to SD card where these commands run: load mmc 0 10000000 capsule1.bin efidebug capsule update -v 10000000 load mmc 0 10000000 capsule2.bin efidebug capsule update -v 10000000 Depends on the boot device used are binaries loaded to qspi or mmc fat partition. Also multiboot register is handled to make sure that the same location(id) is used as image which is upgraded. Two locations are used by purpose for SPL flow. If only boot.bin is used create only one capsule. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-27 14:19:18 +00:00
CONFIG_SET_DFU_ALT_INFO=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_GPIO_HOG=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_XILINX_GPIO=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_DM_PCA953X=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_MMC_HS200_SUPPORT=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_MTD=y
nand: Kconfig: Change dependency for NAND_ARASAN NAND_ARASAN selecting DM_MTD uunconditionally. Driver can be enabled with !DM that's why Kconfig it showing it as error: WARNING: unmet direct dependencies detected for DM_MTD Depends on [n]: DM [=n] Selected by [y]: - NAND_ARASAN [=y] && MTD_RAW_NAND [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-19 07:59:52 +00:00
CONFIG_DM_MTD=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_ARASAN=y
Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:34 +00:00
CONFIG_SYS_NAND_ONFI_DETECTION=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SYS_NAND_MAX_CHIPS=2
CONFIG_SPI_FLASH_BAR=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SPI_FLASH_SST=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
configs: xilinx: Enable configs required for ubifs Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20 10:51:38 +00:00
CONFIG_SPI_FLASH_MTD=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_PHY_MARVELL=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
net: phy: Add support for TI PHY init ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-05-04 21:14:39 +00:00
CONFIG_PHY_TI_DP83867=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_PHY_VITESSE=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_PHY_XILINX_GMII2RGMII=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_PHY_FIXED=y
xilinx: versal: Enable AXI ethernet driver Enable AXI ethernet driver for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-13 09:42:56 +00:00
CONFIG_XILINX_AXIEMAC=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ZYNQ_GEM=y
zynqmp: Enable regulators Enable command and fixed regulators. XDP platform is using them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-31 08:38:30 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settime Right now U-Boot is not aware about date/time that's why enable it by default also with EFI runtime service for setting time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-12 08:03:44 +00:00
CONFIG_DM_RTC=y
CONFIG_RTC_EMULATION=y
xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver Enable RTC command to be able to check available. And also enable ZynqMP RTC driver to be possible to use by default. Here is the list when both drivers are enabled: ZynqMP> rtc list RTC #0 - rtc_emul RTC #1 - rtc@ffa60000 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-29 09:42:11 +00:00
CONFIG_RTC_ZYNQMP=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
serial: Convert ARM_DCC to Kconfig The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-02 21:26:33 +00:00
CONFIG_ARM_DCC=y
xilinx: Enable uartlite driver for Versal/ZynqMP Add CONFIG_XILINX_UARTLITE config to versal/zynqmp defconfig to enable uartlite driver support by default. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-14 09:02:17 +00:00
CONFIG_XILINX_UARTLITE=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ZYNQ_SERIAL=y
soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver soc_xilinx_zynqmp driver allows identification of family & revision of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP. Add this config to xilinx_zynqmp_virt_defconfig file. Probe this driver using platdata U_BOOT_DEVICE structure which is specified in mach-zynqmp/cpu.c. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-10 12:50:18 +00:00
CONFIG_SOC_XILINX_ZYNQMP=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_SPI=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_ZYNQ_SPI=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_ZYNQMP_GQSPI=y
arm64: zynqmp: Enable reset and poweroff via sysreset framework reset and poweroff are called via hooks in psci driver which is going around sysreset framework that's why enable sysreset drivers and do reset and poweroff via this framework. Using this flow will allow us to call SYSTEM_WARM_RESET based on psci 1.1 spec which can be calles with reset -w command. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-13 14:49:04 +00:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_CMD_POWEROFF=y
CONFIG_SYSRESET_PSCI=y
arm64: zynqmp: Enable TPM for xilinx platforms TPMs are becoming popular that's why enable drivers and command for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-09 14:46:57 +00:00
CONFIG_TPM2_TIS_SPI=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27 01:10:37 +00:00
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
arm64: zynqmp: Introduce virtual defconfig Add virtual defconfig for ZynqMP architecture using of_board dtb. This defconfig should become generic config for all ZynqMP boards. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-02 14:57:38 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_FUNCTION_THOR=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
arm64: zynqmp: Enable seps and related video configs Enable this driver to get build and probe for our platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
2021-01-07 13:05:23 +00:00
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_COPY=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_SEPS525=y
CONFIG_LCD=y
CONFIG_SPLASH_SCREEN=y
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_WDT=y
arm64: zynqmp: Move PANIC to Kconfig Convert another option Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-17 14:48:54 +00:00
CONFIG_PANIC_HANG=y
arm64: zynqmp: Enable TPM for xilinx platforms TPMs are becoming popular that's why enable drivers and command for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-09 14:46:57 +00:00
CONFIG_TPM=y
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 10:51:13 +00:00
CONFIG_SPL_GZIP=y
CONFIG_OF_LIBFDT_OVERLAY=y
xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settime Right now U-Boot is not aware about date/time that's why enable it by default also with EFI runtime service for setting time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-12 08:03:44 +00:00
CONFIG_EFI_SET_TIME=y
arm64: zynqmp: Enable capsule update Enable EFI capsule update features to be enabled by default also with all dfu valid options for ZynqMP. This feature was tested on Xilinx ZynqMP zcu104 board with defining dfu_alt_info="mmc 0:1=boot.bin fat 0 1;u-boot.itb fat 0 1" and dfu_alt_info="sf 0:0=boot.bin raw 0 0x50000;u-boot.itb raw 0x80000 0x500000". There is a need to increase malloc size for getting dfu mmc to work. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: Sughosh Ganu <sughosh.ganu@linaro.org> CC: Ilias Apalodimas <ilias.apalodimas@linaro.org> CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-26 06:27:04 +00:00
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
Reference in a new issue Copy permalink