u-boot/drivers/watchdog/wdt-uclass.c

286 lines
5.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017 Google, Inc
*/
#define LOG_CATEGORY UCLASS_WDT
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <hang.h>
#include <log.h>
#include <sysreset.h>
#include <time.h>
#include <wdt.h>
#include <asm/global_data.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
watchdog: Implement generic watchdog_reset() version This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-11 13:58:44 +00:00
DECLARE_GLOBAL_DATA_PTR;
#define WATCHDOG_TIMEOUT_SECS (CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000)
struct wdt_priv {
/* Timeout, in seconds, to configure this device to. */
u32 timeout;
/*
* Time, in milliseconds, between calling the device's ->reset()
* method from watchdog_reset().
*/
ulong reset_period;
/*
* Next time (as returned by get_timer(0)) to call
* ->reset().
*/
ulong next_reset;
/* Whether watchdog_start() has been called on the device. */
bool running;
};
static void init_watchdog_dev(struct udevice *dev)
{
struct wdt_priv *priv;
int ret;
priv = dev_get_uclass_priv(dev);
if (IS_ENABLED(CONFIG_SYSRESET_WATCHDOG_AUTO)) {
ret = sysreset_register_wdt(dev);
if (ret)
printf("WDT: Failed to register %s for sysreset\n",
dev->name);
}
if (!IS_ENABLED(CONFIG_WATCHDOG_AUTOSTART)) {
printf("WDT: Not starting %s\n", dev->name);
return;
}
ret = wdt_start(dev, priv->timeout * 1000, 0);
if (ret != 0) {
printf("WDT: Failed to start %s\n", dev->name);
return;
}
printf("WDT: Started %s with%s servicing (%ds timeout)\n", dev->name,
IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", priv->timeout);
}
int initr_watchdog(void)
{
struct udevice *dev;
struct uclass *uc;
int ret;
ret = uclass_get(UCLASS_WDT, &uc);
if (ret) {
log_debug("Error getting UCLASS_WDT: %d\n", ret);
return 0;
}
uclass_foreach_dev(dev, uc) {
ret = device_probe(dev);
if (ret) {
log_debug("Error probing %s: %d\n", dev->name, ret);
continue;
}
init_watchdog_dev(dev);
}
gd->flags |= GD_FLG_WDT_READY;
return 0;
}
int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
{
const struct wdt_ops *ops = device_get_ops(dev);
int ret;
if (!ops->start)
return -ENOSYS;
ret = ops->start(dev, timeout_ms, flags);
if (ret == 0) {
struct wdt_priv *priv = dev_get_uclass_priv(dev);
priv->running = true;
}
return ret;
}
int wdt_stop(struct udevice *dev)
{
const struct wdt_ops *ops = device_get_ops(dev);
int ret;
if (!ops->stop)
return -ENOSYS;
ret = ops->stop(dev);
if (ret == 0) {
struct wdt_priv *priv = dev_get_uclass_priv(dev);
priv->running = false;
}
return ret;
}
int wdt_stop_all(void)
{
struct wdt_priv *priv;
struct udevice *dev;
struct uclass *uc;
int ret, err;
ret = uclass_get(UCLASS_WDT, &uc);
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
if (!device_active(dev))
continue;
priv = dev_get_uclass_priv(dev);
if (!priv->running)
continue;
err = wdt_stop(dev);
if (!ret)
ret = err;
}
return ret;
}
int wdt_reset(struct udevice *dev)
{
const struct wdt_ops *ops = device_get_ops(dev);
if (!ops->reset)
return -ENOSYS;
return ops->reset(dev);
}
int wdt_expire_now(struct udevice *dev, ulong flags)
{
int ret = 0;
const struct wdt_ops *ops;
debug("WDT Resetting: %lu\n", flags);
ops = device_get_ops(dev);
if (ops->expire_now) {
return ops->expire_now(dev, flags);
} else {
ret = wdt_start(dev, 1, flags);
if (ret < 0)
return ret;
hang();
}
return ret;
}
watchdog: Implement generic watchdog_reset() version This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-11 13:58:44 +00:00
#if defined(CONFIG_WATCHDOG)
/*
* Called by macro WATCHDOG_RESET. This function be called *very* early,
* so we need to make sure, that the watchdog driver is ready before using
* it in this function.
*/
void watchdog_reset(void)
{
struct wdt_priv *priv;
struct udevice *dev;
struct uclass *uc;
watchdog: Implement generic watchdog_reset() version This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-11 13:58:44 +00:00
ulong now;
/* Exit if GD is not ready or watchdog is not initialized yet */
if (!gd || !(gd->flags & GD_FLG_WDT_READY))
return;
if (uclass_get(UCLASS_WDT, &uc))
return;
/*
* All devices bound to the wdt uclass should have been probed
* in initr_watchdog(). But just in case something went wrong,
* check device_active() before accessing the uclass private
* data.
*/
uclass_foreach_dev(dev, uc) {
if (!device_active(dev))
continue;
priv = dev_get_uclass_priv(dev);
if (!priv->running)
continue;
/* Do not reset the watchdog too often */
now = get_timer(0);
if (time_after_eq(now, priv->next_reset)) {
priv->next_reset = now + priv->reset_period;
wdt_reset(dev);
}
watchdog: Implement generic watchdog_reset() version This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Maxim Sloyko <maxims@google.com> Cc: Erik van Luijk <evanluijk@interact.nl> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Simon Glass <sjg@chromium.org> Cc: "Álvaro Fernández Rojas" <noltari@gmail.com> Cc: Philippe Reynes <philippe.reynes@softathome.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-11 13:58:44 +00:00
}
}
#endif
static int wdt_post_bind(struct udevice *dev)
{
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
struct wdt_ops *ops = (struct wdt_ops *)device_get_ops(dev);
static int reloc_done;
if (!reloc_done) {
if (ops->start)
ops->start += gd->reloc_off;
if (ops->stop)
ops->stop += gd->reloc_off;
if (ops->reset)
ops->reset += gd->reloc_off;
if (ops->expire_now)
ops->expire_now += gd->reloc_off;
reloc_done++;
}
#endif
return 0;
}
static int wdt_pre_probe(struct udevice *dev)
{
u32 timeout = WATCHDOG_TIMEOUT_SECS;
/*
* Reset every 1000ms, or however often is required as
* indicated by a hw_margin_ms property.
*/
ulong reset_period = 1000;
struct wdt_priv *priv;
if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
timeout = dev_read_u32_default(dev, "timeout-sec", timeout);
reset_period = dev_read_u32_default(dev, "hw_margin_ms",
4 * reset_period) / 4;
}
priv = dev_get_uclass_priv(dev);
priv->timeout = timeout;
priv->reset_period = reset_period;
/*
* Pretend this device was last reset "long" ago so the first
* watchdog_reset will actually call its ->reset method.
*/
priv->next_reset = get_timer(0);
return 0;
}
UCLASS_DRIVER(wdt) = {
.id = UCLASS_WDT,
.name = "watchdog",
.flags = DM_UC_FLAG_SEQ_ALIAS,
.post_bind = wdt_post_bind,
.pre_probe = wdt_pre_probe,
.per_device_auto = sizeof(struct wdt_priv),
};