u-boot/board/freescale/imx8ulp_evk/spl.c

141 lines
2.8 KiB
C
Raw Normal View History

arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 NXP
*/
#include <common.h>
#include <init.h>
#include <spl.h>
#include <asm/io.h>
#include <errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx8ulp-pins.h>
#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <asm/arch/ddr.h>
#include <asm/arch/rdc.h>
#include <asm/arch/upower.h>
#include <asm/arch/s400_api.h>
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
DECLARE_GLOBAL_DATA_PTR;
void spl_dram_init(void)
{
/* Reboot in dual boot setting no need to init ddr again */
bool ddr_enable = pcc_clock_is_enable(5, LPDDR4_PCC5_SLOT);
if (!ddr_enable) {
init_clk_ddr();
ddr_init(&dram_timing);
} else {
/* reinit pfd/pfddiv and lpavnic except pll4*/
cgc2_pll4_init(false);
}
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_BOOTROM;
}
int power_init_board(void)
{
if (IS_ENABLED(CONFIG_IMX8ULP_LD_MODE)) {
/* Set buck3 to 0.9v LD */
upower_pmic_i2c_write(0x22, 0x18);
} else if (IS_ENABLED(CONFIG_IMX8ULP_ND_MODE)) {
/* Set buck3 to 1.0v ND */
upower_pmic_i2c_write(0x22, 0x20);
} else {
/* Set buck3 to 1.1v OD */
upower_pmic_i2c_write(0x22, 0x28);
}
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
return 0;
}
void display_ele_fw_version(void)
{
u32 fw_version, sha1, res;
int ret;
ret = ahab_get_fw_version(&fw_version, &sha1, &res);
if (ret) {
printf("ahab get firmware version failed %d, 0x%x\n", ret, res);
} else {
printf("ELE firmware version %u.%u.%u-%x",
(fw_version & (0x00ff0000)) >> 16,
(fw_version & (0x0000ff00)) >> 8,
(fw_version & (0x000000ff)), sha1);
((fw_version & (0x80000000)) >> 31) == 1 ? puts("-dirty\n") : puts("\n");
}
}
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
void spl_board_init(void)
{
struct udevice *dev;
u32 res;
int ret;
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
uclass_find_first_device(UCLASS_MISC, &dev);
for (; dev; uclass_find_next_device(&dev)) {
if (device_probe(dev))
continue;
}
board_early_init_f();
preloader_console_init();
puts("Normal Boot\n");
display_ele_fw_version();
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
/* After AP set iomuxc0, the i2c can't work, Need M33 to set it now */
/* Load the lposc fuse to work around ROM issue. The fuse depends on S400 to read. */
if (is_soc_rev(CHIP_REV_1_0))
load_lposc_fuse();
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
upower_init();
power_init_board();
clock_init_late();
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
/* DDR initialization */
spl_dram_init();
/* This must place after upower init, so access to MDA and MRC are valid */
/* Init XRDC MDA */
xrdc_init_mda();
/* Init XRDC MRC for VIDEO, DSP domains */
xrdc_init_mrc();
/* Call it after PS16 power up */
set_lpav_qos();
/* Enable A35 access to the CAAM */
ret = ahab_release_caam(0x7, &res);
if (ret)
printf("ahab release caam failed %d, 0x%x\n", ret, res);
arm: imx: add i.MX8ULP EVK support Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-07 08:01:13 +00:00
}
void board_init_f(ulong dummy)
{
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
timer_init();
arch_cpu_init();
board_init_r(NULL, 0);
}