u-boot/arch/arm/cpu/tegra-common/ap.c

132 lines
3.4 KiB
C
Raw Normal View History

/*
* (C) Copyright 2010-2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch-tegra/ap.h>
#include <asm/arch-tegra/fuse.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/scu.h>
#include <asm/arch-tegra/warmboot.h>
int tegra_get_chip_type(void)
{
struct apb_misc_gp_ctlr *gp;
struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
uint tegra_sku_id, rev;
/*
* This is undocumented, Chip ID is bits 15:8 of the register
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
* Tegra30
*/
gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
tegra_sku_id = readl(&fuse->sku_info) & 0xff;
switch (rev) {
case CHIPID_TEGRA20:
switch (tegra_sku_id) {
case SKU_ID_T20:
return TEGRA_SOC_T20;
case SKU_ID_T25SE:
case SKU_ID_AP25:
case SKU_ID_T25:
case SKU_ID_AP25E:
case SKU_ID_T25E:
return TEGRA_SOC_T25;
}
break;
}
/* unknown sku id */
return TEGRA_SOC_UNKNOWN;
}
static void enable_scu(void)
{
struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
u32 reg;
/* If SCU already setup/enabled, return */
if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
return;
/* Invalidate all ways for all processors */
writel(0xFFFF, &scu->scu_inv_all);
/* Enable SCU - bit 0 */
reg = readl(&scu->scu_ctrl);
reg |= SCU_CTRL_ENABLE;
writel(reg, &scu->scu_ctrl);
}
static u32 get_odmdata(void)
{
/*
* ODMDATA is stored in the BCT in IRAM by the BootROM.
* The BCT start and size are stored in the BIT in IRAM.
* Read the data @ bct_start + (bct_size - 12). This works
* on T20 and T30 BCTs, which are locked down. If this changes
* in new chips (T114, etc.), we can revisit this algorithm.
*/
u32 bct_start, odmdata;
bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR);
odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
return odmdata;
}
static void init_pmc_scratch(void)
{
struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 odmdata;
int i;
/* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
for (i = 0; i < 23; i++)
writel(0, &pmc->pmc_scratch1+i);
/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
odmdata = get_odmdata();
writel(odmdata, &pmc->pmc_scratch20);
}
void s_init(void)
{
/* Init PMC scratch memory */
init_pmc_scratch();
enable_scu();
/* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
"orr r0, r0, #0x41\n"
"mcr p15, 0, r0, c1, c0, 1\n");
/* FIXME: should have ap20's L2 disabled too? */
}