u-boot/drivers/serial/serial_sh.c

357 lines
7.6 KiB
C
Raw Normal View History

/*
* SuperH SCIF device driver.
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <serial.h>
#include <linux/compiler.h>
#include <dm/platform_data/serial_sh.h>
#include "serial_sh.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
#elif defined(CONFIG_CPU_SH7763)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
(port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
/* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
#elif defined(CONFIG_ARCH_SH7372)
static int scif_rxfill(struct uart_port *port)
{
if (port->type == PORT_SCIFA)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
else
return sci_in(port, SCRFDR);
}
#else
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
static void sh_serial_init_generic(struct uart_port *port)
{
sci_out(port, SCSCR , SCSCR_INIT(port));
sci_out(port, SCSCR , SCSCR_INIT(port));
sci_out(port, SCSMR, 0);
sci_out(port, SCSMR, 0);
sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(port, SCFCR);
sci_out(port, SCFCR, 0);
}
static void
sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate)
{
if (port->clk_mode == EXT_CLK) {
unsigned short dl = DL_VALUE(baudrate, clk);
sci_out(port, DL, dl);
/* Need wait: Clock * 1/dl * 1/16 */
udelay((1000000 * dl * 16 / clk) * 1000 + 1);
} else {
sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk));
}
}
static void handle_error(struct uart_port *port)
{
sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
sci_in(port, SCLSR);
sci_out(port, SCLSR, 0x00);
}
static int serial_raw_putc(struct uart_port *port, const char c)
{
/* Tx fifo is empty */
if (!(sci_in(port, SCxSR) & SCxSR_TEND(port)))
return -EAGAIN;
sci_out(port, SCxTDR, c);
sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port));
return 0;
}
static int serial_rx_fifo_level(struct uart_port *port)
{
return scif_rxfill(port);
}
static int sh_serial_tstc_generic(struct uart_port *port)
{
if (sci_in(port, SCxSR) & SCIF_ERRORS) {
handle_error(port);
return 0;
}
return serial_rx_fifo_level(port) ? 1 : 0;
}
static int serial_getc_check(struct uart_port *port)
{
unsigned short status;
status = sci_in(port, SCxSR);
if (status & SCIF_ERRORS)
handle_error(port);
if (sci_in(port, SCLSR) & SCxSR_ORER(port))
handle_error(port);
return status & (SCIF_DR | SCxSR_RDxF(port));
}
static int sh_serial_getc_generic(struct uart_port *port)
{
unsigned short status;
char ch;
if (!serial_getc_check(port))
return -EAGAIN;
ch = sci_in(port, SCxRDR);
status = sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
if (status & SCIF_ERRORS)
handle_error(port);
if (sci_in(port, SCLSR) & SCxSR_ORER(port))
handle_error(port);
return ch;
}
#ifdef CONFIG_DM_SERIAL
static int sh_serial_pending(struct udevice *dev, bool input)
{
struct uart_port *priv = dev_get_priv(dev);
return sh_serial_tstc_generic(priv);
}
static int sh_serial_putc(struct udevice *dev, const char ch)
{
struct uart_port *priv = dev_get_priv(dev);
return serial_raw_putc(priv, ch);
}
static int sh_serial_getc(struct udevice *dev)
{
struct uart_port *priv = dev_get_priv(dev);
return sh_serial_getc_generic(priv);
}
static int sh_serial_setbrg(struct udevice *dev, int baudrate)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
struct uart_port *priv = dev_get_priv(dev);
sh_serial_setbrg_generic(priv, plat->clk, baudrate);
return 0;
}
static int sh_serial_probe(struct udevice *dev)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
struct uart_port *priv = dev_get_priv(dev);
priv->membase = (unsigned char *)plat->base;
priv->mapbase = plat->base;
priv->type = plat->type;
priv->clk_mode = plat->clk_mode;
sh_serial_init_generic(priv);
return 0;
}
static const struct dm_serial_ops sh_serial_ops = {
.putc = sh_serial_putc,
.pending = sh_serial_pending,
.getc = sh_serial_getc,
.setbrg = sh_serial_setbrg,
};
#ifdef CONFIG_OF_CONTROL
static const struct udevice_id sh_serial_id[] ={
{.compatible = "renesas,sci", .data = PORT_SCI},
{.compatible = "renesas,scif", .data = PORT_SCIF},
{.compatible = "renesas,scifa", .data = PORT_SCIFA},
{}
};
static int sh_serial_ofdata_to_platdata(struct udevice *dev)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = addr;
plat->clk = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", 1);
plat->type = dev_get_driver_data(dev);
return 0;
}
#endif
U_BOOT_DRIVER(serial_sh) = {
.name = "serial_sh",
.id = UCLASS_SERIAL,
.of_match = of_match_ptr(sh_serial_id),
.ofdata_to_platdata = of_match_ptr(sh_serial_ofdata_to_platdata),
.platdata_auto_alloc_size = sizeof(struct sh_serial_platdata),
.probe = sh_serial_probe,
.ops = &sh_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
.priv_auto_alloc_size = sizeof(struct uart_port),
};
#else /* CONFIG_DM_SERIAL */
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
#elif defined(CONFIG_CONS_SCIF1)
# define SCIF_BASE SCIF1_BASE
#elif defined(CONFIG_CONS_SCIF2)
# define SCIF_BASE SCIF2_BASE
#elif defined(CONFIG_CONS_SCIF3)
# define SCIF_BASE SCIF3_BASE
#elif defined(CONFIG_CONS_SCIF4)
# define SCIF_BASE SCIF4_BASE
#elif defined(CONFIG_CONS_SCIF5)
# define SCIF_BASE SCIF5_BASE
#elif defined(CONFIG_CONS_SCIF6)
# define SCIF_BASE SCIF6_BASE
#elif defined(CONFIG_CONS_SCIF7)
# define SCIF_BASE SCIF7_BASE
#else
# error "Default SCIF doesn't set....."
#endif
#if defined(CONFIG_SCIF_A)
#define SCIF_BASE_PORT PORT_SCIFA
#elif defined(CONFIG_SCI)
#define SCIF_BASE_PORT PORT_SCI
#else
#define SCIF_BASE_PORT PORT_SCIF
#endif
static struct uart_port sh_sci = {
.membase = (unsigned char *)SCIF_BASE,
.mapbase = SCIF_BASE,
.type = SCIF_BASE_PORT,
#ifdef CONFIG_SCIF_USE_EXT_CLK
.clk_mode = EXT_CLK,
#endif
};
static void sh_serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
struct uart_port *port = &sh_sci;
sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate);
}
static int sh_serial_init(void)
{
struct uart_port *port = &sh_sci;
sh_serial_init_generic(port);
serial_setbrg();
return 0;
}
static void sh_serial_putc(const char c)
{
struct uart_port *port = &sh_sci;
if (c == '\n') {
while (1) {
if (serial_raw_putc(port, '\r') != -EAGAIN)
break;
}
}
while (1) {
if (serial_raw_putc(port, c) != -EAGAIN)
break;
}
}
static int sh_serial_tstc(void)
{
struct uart_port *port = &sh_sci;
return sh_serial_tstc_generic(port);
}
static int sh_serial_getc(void)
{
struct uart_port *port = &sh_sci;
int ch;
while (1) {
ch = sh_serial_getc_generic(port);
if (ch != -EAGAIN)
break;
}
return ch;
}
static struct serial_device sh_serial_drv = {
.name = "sh_serial",
.start = sh_serial_init,
.stop = NULL,
.setbrg = sh_serial_setbrg,
.putc = sh_serial_putc,
.puts = default_serial_puts,
.getc = sh_serial_getc,
.tstc = sh_serial_tstc,
};
void sh_serial_initialize(void)
{
serial_register(&sh_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}
#endif /* CONFIG_DM_SERIAL */