u-boot/arch/powerpc/cpu/mpc824x/cpu_init.c

312 lines
11 KiB
C
Raw Normal View History

2002-11-03 00:24:07 +00:00
/*
* (C) Copyright 2000
* Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 00:24:07 +00:00
*/
#include <common.h>
#include <asm/processor.h>
#include <mpc824x.h>
#ifndef CONFIG_SYS_BANK0_ROW
#define CONFIG_SYS_BANK0_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK1_ROW
#define CONFIG_SYS_BANK1_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK2_ROW
#define CONFIG_SYS_BANK2_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK3_ROW
#define CONFIG_SYS_BANK3_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK4_ROW
#define CONFIG_SYS_BANK4_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK5_ROW
#define CONFIG_SYS_BANK5_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK6_ROW
#define CONFIG_SYS_BANK6_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_BANK7_ROW
#define CONFIG_SYS_BANK7_ROW 0
2002-11-03 00:24:07 +00:00
#endif
#ifndef CONFIG_SYS_DBUS_SIZE2
#define CONFIG_SYS_DBUS_SIZE2 0
2002-11-03 00:24:07 +00:00
#endif
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
*/
void
cpu_init_f (void)
{
register unsigned long val;
CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
#if defined(CONFIG_MUSENKI)
2002-11-03 00:24:07 +00:00
/* Why is this here, you ask? Try, just try setting 0x8000
* in PCIACR with CONFIG_WRITE_HALFWORD()
* this one was a stumper, and we are annoyed
*/
#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
__asm__ __volatile__(" \
stw %2,0(%0)\n \
sync\n \
sth %3,2(%1)\n \
sync\n \
" \
: /* no output */ \
: "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
"r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
);
2002-11-03 00:24:07 +00:00
M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
2002-11-03 00:24:07 +00:00
#endif
CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
/*
* Note that although this bit is cleared after a hard reset, it
* must be explicitly set and then cleared by software during
* initialization in order to guarantee correct operation of the
* DLL and the SDRAM_CLK[0:3] signals (if they are used).
*/
CONFIG_READ_BYTE (AMBOR, val);
CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
#ifdef CONFIG_MPC8245
/* silicon bug 28 MPC8245 */
CONFIG_READ_BYTE(AMBOR,val);
CONFIG_WRITE_BYTE(AMBOR,val|0x1);
#if 0
/*
* The following bug only affects older (XPC8245) processors.
* DMA transfers initiated by external devices get corrupted due
* to a hardware scheduling problem.
*
* The effect is:
* when transferring X words, the first 32 words are transferred
* OK, the next 3 x 32 words are 'old' data (from previous DMA)
* while the rest of the X words is xferred fine.
*
* Disabling 3 of the 4 32 word hardware buffers solves the problem
* with no significant performance loss.
*/
CONFIG_READ_BYTE(PCMBCR,val);
/* in order not to corrupt data which is being read over the PCI bus
* with the PPC as slave, we need to reduce the number of PCMRBs to 1,
* 4.11 in the processor user manual
* */
2002-11-03 00:24:07 +00:00
#if 1
CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
#else
CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
/* default, 4 PCMRBs are used */
#endif
#endif
#endif
CONFIG_READ_WORD(PICR1, val);
2002-11-03 00:24:07 +00:00
#if defined(CONFIG_MPC8240)
CONFIG_WRITE_WORD( PICR1,
(val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
PIRC1_MSK | PICR1_PROC_TYPE_603E |
PICR1_FLASH_WR_EN | PICR1_MCP_EN |
PICR1_CF_DPARK | PICR1_EN_PCS |
PICR1_CF_APARK );
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_MPC8245)
CONFIG_WRITE_WORD( PICR1,
(val & (PICR1_RCS0)) |
PICR1_PROC_TYPE_603E |
PICR1_FLASH_WR_EN | PICR1_MCP_EN |
PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
2002-11-03 00:24:07 +00:00
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
CONFIG_READ_WORD(PICR2, val);
val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
CONFIG_WRITE_WORD(PICR2, val);
2002-11-03 00:24:07 +00:00
CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
#ifndef CONFIG_SYS_RAMBOOT
CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
(CONFIG_SYS_BANK0_ROW) |
(CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
(CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
(CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
(CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
(CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
(CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
(CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
(CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
2002-11-03 00:24:07 +00:00
#endif
#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
2002-11-03 00:24:07 +00:00
#else
CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
2002-11-03 00:24:07 +00:00
#endif
#if defined(CONFIG_MPC8240)
CONFIG_WRITE_WORD(MCCR3,
(((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
(CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT));
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_MPC8245)
CONFIG_WRITE_WORD(MCCR3,
(((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
2002-11-03 00:24:07 +00:00
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
/* this is gross. We think these should all be the same, and various boards
* should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
2002-11-03 00:24:07 +00:00
* its not set, we define it to zero in this file
*/
#if defined(CONFIG_CU824)
2002-11-03 00:24:07 +00:00
CONFIG_WRITE_WORD(MCCR4,
(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
2002-11-03 00:24:07 +00:00
MCCR4_BIT21 |
(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
(CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_MPC8240)
CONFIG_WRITE_WORD(MCCR4,
(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
2002-11-03 00:24:07 +00:00
MCCR4_BIT21 |
(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
(CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_MPC8245)
CONFIG_READ_WORD(MCCR1, val);
val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
2002-11-03 00:24:07 +00:00
CONFIG_WRITE_WORD(MCCR4,
(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
(CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
(CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
(CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
(val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
(CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
2002-11-03 00:24:07 +00:00
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
CONFIG_WRITE_WORD(MSAR1,
( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(EMSAR1,
( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(MSAR2,
( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(EMSAR2,
( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(MEAR1,
( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(EMEAR1,
( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(MEAR2,
( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
CONFIG_WRITE_WORD(EMEAR2,
( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
2002-11-03 00:24:07 +00:00
CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
#ifdef CONFIG_SYS_DLL_MAX_DELAY
CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */
2002-11-03 00:24:07 +00:00
#endif
#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
2002-11-03 00:24:07 +00:00
#endif
#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */
2002-11-03 00:24:07 +00:00
#endif /* setup & hold time */
CONFIG_WRITE_BYTE(MBER,
CONFIG_SYS_BANK0_ENABLE |
(CONFIG_SYS_BANK1_ENABLE << 1) |
(CONFIG_SYS_BANK2_ENABLE << 2) |
(CONFIG_SYS_BANK3_ENABLE << 3) |
(CONFIG_SYS_BANK4_ENABLE << 4) |
(CONFIG_SYS_BANK5_ENABLE << 5) |
(CONFIG_SYS_BANK6_ENABLE << 6) |
(CONFIG_SYS_BANK7_ENABLE << 7));
2002-11-03 00:24:07 +00:00
#ifdef CONFIG_SYS_PGMAX
CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
2002-11-03 00:24:07 +00:00
#endif
/* ! Wait 200us before initialize other registers */
/*FIXME: write a decent udelay wait */
__asm__ __volatile__(
" mtctr %0 \n \
0: bdnz 0b\n"
:
: "r" (0x10000));
2002-11-03 00:24:07 +00:00
CONFIG_READ_WORD(MCCR1, val);
CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
__asm__ __volatile__("eieio");
2002-11-03 00:24:07 +00:00
}
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r (void)
{
return (0);
}