u-boot/include/fdt_support.h

391 lines
12 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*/
#ifndef __FDT_SUPPORT_H
#define __FDT_SUPPORT_H
#ifdef CONFIG_OF_LIBFDT
#include <asm/u-boot.h>
#include <linux/libfdt.h>
/**
* arch_fixup_fdt() - Write arch-specific information to fdt
*
* Defined in arch/$(ARCH)/lib/bootm-fdt.c
*
* @blob: FDT blob to write to
* @return 0 if ok, or -ve FDT_ERR_... on failure
*/
int arch_fixup_fdt(void *blob);
void ft_cpu_setup(void *blob, struct bd_info *bd);
void ft_pci_setup(void *blob, struct bd_info *bd);
u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
const char *prop, const u32 dflt);
u32 fdt_getprop_u32_default(const void *fdt, const char *path,
const char *prop, const u32 dflt);
/**
* Add data to the root of the FDT before booting the OS.
*
* See doc/device-tree-bindings/root.txt
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_root(void *fdt);
/**
* Add chosen data the FDT before booting the OS.
*
* In particular, this adds the kernel command line (bootargs) to the FDT.
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_chosen(void *fdt);
/**
* Add initrd information to the FDT before booting the OS.
*
* @param fdt FDT address in memory
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
u32 val, int create);
static inline void do_fixup_by_path_string(void *fdt, const char *path,
const char *prop, const char *status)
{
do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
}
void do_fixup_by_prop(void *fdt,
const char *pname, const void *pval, int plen,
const char *prop, const void *val, int len,
int create);
void do_fixup_by_prop_u32(void *fdt,
const char *pname, const void *pval, int plen,
const char *prop, u32 val, int create);
void do_fixup_by_compat(void *fdt, const char *compat,
const char *prop, const void *val, int len, int create);
void do_fixup_by_compat_u32(void *fdt, const char *compat,
const char *prop, u32 val, int create);
/**
* Setup the memory node in the DT. Creates one if none was existing before.
* Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
* whole memory.
*
* @param blob FDT blob to update
* @param start Begin of DRAM mapping in physical memory
* @param size Size of the single memory bank
* @return 0 if ok, or -1 or -FDT_ERR_... on error
*/
int fdt_fixup_memory(void *blob, u64 start, u64 size);
/**
* Fill the DT memory node with multiple memory banks.
* Creates the node if none was existing before.
* If banks is 0, it will not touch the existing reg property. This allows
* boards to not mess with the existing DT setup, which may have been
* filled in properly before.
*
* @param blob FDT blob to update
* @param start Array of size <banks> to hold the start addresses.
* @param size Array of size <banks> to hold the size of each region.
* @param banks Number of memory banks to create. If 0, the reg
* property will be left untouched.
* @return 0 if ok, or -1 or -FDT_ERR_... on error
*/
#ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
int fdt_set_usable_memory(void *blob, u64 start[], u64 size[], int banks);
#else
static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],
int banks)
{
return 0;
}
#endif
void fdt_fixup_ethernet(void *fdt);
int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
/**
* Update native-mode property of display-timings node to the phandle
* of the timings matching a display by name (case insensitive).
*
* see kernel Documentation/devicetree/bindings/video/display-timing.txt
*
* @param blob FDT blob to update
* @param path path within dt
* @param display name of display timing to match
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_fixup_display(void *blob, const char *path, const char *display);
#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
void fsl_fdt_fixup_dr_usb(void *blob, struct bd_info *bd);
#else
static inline void fsl_fdt_fixup_dr_usb(void *blob, struct bd_info *bd) {}
#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
#else
static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
#endif
/**
* Record information about a processed loadable in /fit-images (creating
* /fit-images if necessary).
*
* @param blob FDT blob to update
* @param index index of this loadable
* @param name name of the loadable
* @param load_addr address the loadable was loaded to
* @param size number of bytes loaded
* @param entry_point entry point (if specified, otherwise pass -1)
* @param type type (if specified, otherwise pass NULL)
* @param os os-type (if specified, otherwise pass NULL)
* @param arch architecture (if specified, otherwise pass NULL)
* @return 0 if ok, or -1 or -FDT_ERR_... on error
*/
int fdt_record_loadable(void *blob, u32 index, const char *name,
uintptr_t load_addr, u32 size, uintptr_t entry_point,
const char *type, const char *os, const char *arch);
#ifdef CONFIG_PCI
#include <pci.h>
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
/**
* Add board-specific data to the FDT before booting the OS.
*
* Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
* This function is called if CONFIG_OF_BOARD_SETUP is defined
*
* @param blob FDT blob to update
* @param bd Pointer to board data
* @return 0 if ok, or -FDT_ERR_... on error
*/
int ft_board_setup(void *blob, struct bd_info *bd);
/**
* board_fdt_chosen_bootargs() - Arbitrarily amend fdt kernel command line
*
* This is used for late modification of kernel command line arguments just
* before they are added into the /chosen node in flat device tree.
*
* @return: pointer to kernel command line arguments in memory
*/
char *board_fdt_chosen_bootargs(void);
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
* are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
* called at the end of the image_setup_libfdt() is to do that convertion.
*/
void ft_board_setup_ex(void *blob, struct bd_info *bd);
/**
* Add system-specific data to the FDT before booting the OS.
*
* Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
* This function is called if CONFIG_OF_SYSTEM_SETUP is defined
*
* @param blob FDT blob to update
* @param bd Pointer to board data
* @return 0 if ok, or -FDT_ERR_... on error
*/
int ft_system_setup(void *blob, struct bd_info *bd);
void set_working_fdt_addr(ulong addr);
/**
* shrink down the given blob to minimum size + some extrasize if required
*
* @param blob FDT blob to update
* @param extrasize additional bytes needed
* @return 0 if ok, or -FDT_ERR_... on error
*/
int fdt_shrink_to_minimum(void *blob, uint extrasize);
int fdt_increase_size(void *fdt, int add_len);
int fdt_fixup_nor_flash_size(void *blob);
struct node_info;
#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
void fdt_fixup_mtdparts(void *fdt, const struct node_info *node_info,
int node_info_size);
#else
static inline void fdt_fixup_mtdparts(void *fdt,
const struct node_info *node_info,
int node_info_size)
{
}
#endif
void fdt_del_node_and_alias(void *blob, const char *alias);
/**
* Translate an address from the DT into a CPU physical address
*
* The translation relies on the "ranges" property.
*
* @param blob Pointer to device tree blob
* @param node_offset Node DT offset
* @param in_addr Pointer to the address to translate
* @return translated address or OF_BAD_ADDR on error
*/
u64 fdt_translate_address(const void *blob, int node_offset,
const __be32 *in_addr);
/**
* Translate a DMA address from the DT into a CPU physical address
*
* The translation relies on the "dma-ranges" property.
*
* @param blob Pointer to device tree blob
* @param node_offset Node DT offset
* @param in_addr Pointer to the DMA address to translate
* @return translated DMA address or OF_BAD_ADDR on error
*/
u64 fdt_translate_dma_address(const void *blob, int node_offset,
const __be32 *in_addr);
/**
* Get DMA ranges for a specifc node, this is useful to perform bus->cpu and
* cpu->bus address translations
*
* @param blob Pointer to device tree blob
* @param node_offset Node DT offset
* @param cpu Pointer to variable storing the range's cpu address
* @param bus Pointer to variable storing the range's bus address
* @param size Pointer to variable storing the range's size
* @return translated DMA address or OF_BAD_ADDR on error
*/
int fdt_get_dma_range(const void *blob, int node_offset, phys_addr_t *cpu,
dma_addr_t *bus, u64 *size);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
u64 addr);
u64 fdt_get_base_address(const void *fdt, int node);
int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
uint64_t *addr, uint64_t *len);
enum fdt_status {
FDT_STATUS_OKAY,
FDT_STATUS_DISABLED,
FDT_STATUS_FAIL,
FDT_STATUS_FAIL_ERROR_CODE,
};
int fdt_set_node_status(void *fdt, int nodeoffset,
enum fdt_status status, unsigned int error_code);
static inline int fdt_status_okay(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
}
static inline int fdt_status_disabled(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
}
static inline int fdt_status_fail(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
}
int fdt_set_status_by_alias(void *fdt, const char *alias,
enum fdt_status status, unsigned int error_code);
static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
}
static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
}
static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
}
/* Helper to read a big number; size is in cells (not bytes) */
static inline u64 fdt_read_number(const fdt32_t *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | fdt32_to_cpu(*(cell++));
return r;
}
void fdt_support_default_count_cells(const void *blob, int parentoffset,
int *addrc, int *sizec);
int ft_verify_fdt(void *fdt);
int arch_fixup_memory_node(void *blob);
int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
u32 height, u32 stride, const char *format);
int fdt_overlay_apply_verbose(void *fdt, void *fdto);
int fdt_valid(struct fdt_header **blobp);
/**
* fdt_get_cells_len() - Get the length of a type of cell in top-level nodes
*
* Returns the length of the cell type in bytes (4 or 8).
*
* @blob: Pointer to device tree blob
* @nr_cells_name: Name to lookup, e.g. "#address-cells"
*/
int fdt_get_cells_len(const void *blob, char *nr_cells_name);
#endif /* ifdef CONFIG_OF_LIBFDT */
#ifdef USE_HOSTCC
int fdtdec_get_int(const void *blob, int node, const char *prop_name,
int default_val);
/*
* Count child nodes of one parent node.
*
* @param blob FDT blob
* @param node parent node
* @return number of child node; 0 if there is not child node
*/
int fdtdec_get_child_count(const void *blob, int node);
#endif
#ifdef CONFIG_FMAN_ENET
int fdt_update_ethernet_dt(void *blob);
#endif
#ifdef CONFIG_FSL_MC_ENET
void fdt_fixup_board_enet(void *blob);
#endif
#ifdef CONFIG_CMD_PSTORE
void fdt_fixup_pstore(void *blob);
#endif
#endif /* ifndef __FDT_SUPPORT_H */