u-boot/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP LS1028A-QDS device tree fragment for RCW x3xx
 *
 * Copyright 2019-2021 NXP
 */

/*
 * This setup is using a SCH-30841-R card with AQR412 quad PHY in slot 2.  This
 * is used for the 4 integrated ethernet switch in a multiplexes USXGMII set-up.
 *
 * We're including the normal .dsti file, not the reworked card .dtsi
 * intentionally.  We are using multiplexing of the 4 interfaces on a single
 * lane and the rework doesn't actually disable any port.  The rework is in fact
 * needed, otherwise the PHY won't work with the default wiring on the QDS/PHY
 * card.
 */
&slot2 {
#include "fsl-sch-30841.dtsi"
};

&enetc_port2 {
	status = "okay";
};

&mscc_felix {
	status = "okay";
};

&mscc_felix_port0 {
	status = "okay";
	managed = "in-band-status";
	phy-mode = "usxgmii";
	phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
};

&mscc_felix_port1 {
	status = "okay";
	managed = "in-band-status";
	phy-mode = "usxgmii";
	phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
};

&mscc_felix_port2 {
	status = "okay";
	managed = "in-band-status";
	phy-mode = "usxgmii";
	phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
};

&mscc_felix_port3 {
	status = "okay";
	managed = "in-band-status";
	phy-mode = "usxgmii";
	phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
};

&mscc_felix_port4 {
	ethernet = <&enetc_port2>;
	status = "okay";
};