u-boot/arch/arm/dts/stm32mp15xx-dkx.dtsi

743 lines
15 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mcuram2: mcuram2@10000000 {
compatible = "shared-dma-pool";
reg = <0x10000000 0x40000>;
no-map;
};
vdev0vring0: vdev0vring0@10040000 {
compatible = "shared-dma-pool";
reg = <0x10040000 0x1000>;
no-map;
};
vdev0vring1: vdev0vring1@10041000 {
compatible = "shared-dma-pool";
reg = <0x10041000 0x1000>;
no-map;
};
vdev0buffer: vdev0buffer@10042000 {
compatible = "shared-dma-pool";
reg = <0x10042000 0x4000>;
no-map;
};
mcuram: mcuram@30000000 {
compatible = "shared-dma-pool";
reg = <0x30000000 0x40000>;
no-map;
};
retram: retram@38000000 {
compatible = "shared-dma-pool";
reg = <0x38000000 0x10000>;
no-map;
};
gpu_reserved: gpu@d4000000 {
reg = <0xd4000000 0x4000000>;
no-map;
};
};
led {
compatible = "gpio-leds";
led-blue {
label = "heartbeat";
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
sound {
compatible = "audio-graph-card";
ARM: dts: stm32mp: alignment with v6.3 Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-24 14:21:10 +00:00
label = "STM32MP15-DK";
routing =
"Playback" , "MCLK",
"Capture" , "MCLK",
"MICL" , "Mic Bias";
dais = <&sai2a_port &sai2b_port &i2s2_port>;
status = "okay";
};
vin: vin {
compatible = "regulator-fixed";
regulator-name = "vin";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&adc {
pinctrl-names = "default";
pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
vdd-supply = <&vdd>;
vdda-supply = <&vdd>;
vref-supply = <&vrefbuf>;
status = "disabled";
adc1: adc@0 {
/*
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
* 5 * (56 + 47kOhms) * 5pF => 2.5us.
* Use arbitrary margin here (e.g. 5us).
*/
st,min-sample-time-nsecs = <5000>;
/* AIN connector, USB Type-C CC1 & CC2 */
st,adc-channels = <0 1 6 13 18 19>;
status = "okay";
};
adc2: adc@100 {
/* AIN connector, USB Type-C CC1 & CC2 */
st,adc-channels = <0 1 2 6 18 19>;
st,min-sample-time-nsecs = <5000>;
status = "okay";
};
};
&cec {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cec_pins_b>;
pinctrl-1 = <&cec_sleep_pins_b>;
status = "okay";
};
&crc1 {
status = "okay";
};
&dts {
status = "okay";
};
&cpu0{
cpu-supply = <&vddcore>;
};
&cpu1{
cpu-supply = <&vddcore>;
};
&ethernet0 {
status = "okay";
pinctrl-0 = <&ethernet0_rgmii_pins_a>;
pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
pinctrl-names = "default", "sleep";
phy-mode = "rgmii-id";
max-speed = <1000>;
phy-handle = <&phy0>;
ARM: dts: stm32mp: alignment with v6.3 Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-24 14:21:10 +00:00
mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
&gpu {
contiguous-area = <&gpu_reserved>;
};
&hash1 {
status = "okay";
};
&i2c1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-1 = <&i2c1_sleep_pins_a>;
i2c-scl-rising-time-ns = <100>;
i2c-scl-falling-time-ns = <7>;
status = "okay";
/delete-property/dmas;
/delete-property/dma-names;
hdmi-transmitter@39 {
compatible = "sil,sii9022";
reg = <0x39>;
iovcc-supply = <&v3v3_hdmi>;
cvcc12-supply = <&v1v2_hdmi>;
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpiog>;
#sound-dai-cells = <0>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
sii9022_in: endpoint {
remote-endpoint = <&ltdc_ep0_out>;
};
};
port@3 {
reg = <3>;
sii9022_tx_endpoint: endpoint {
remote-endpoint = <&i2s2_endpoint>;
};
};
};
};
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
#sound-dai-cells = <0>;
VL-supply = <&v3v3>;
VD-supply = <&v1v8_audio>;
VA-supply = <&v1v8_audio>;
VAHP-supply = <&v1v8_audio>;
reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
clocks = <&sai2a>;
clock-names = "MCLK";
status = "okay";
cs42l51_port: port {
#address-cells = <1>;
#size-cells = <0>;
cs42l51_tx_endpoint: endpoint@0 {
reg = <0>;
remote-endpoint = <&sai2a_endpoint>;
frame-master = <&cs42l51_tx_endpoint>;
bitclock-master = <&cs42l51_tx_endpoint>;
};
cs42l51_rx_endpoint: endpoint@1 {
reg = <1>;
remote-endpoint = <&sai2b_endpoint>;
frame-master = <&cs42l51_rx_endpoint>;
bitclock-master = <&cs42l51_rx_endpoint>;
};
};
};
};
&i2c4 {
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2 DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-30 13:52:46 +00:00
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_pins_a>;
pinctrl-1 = <&i2c4_sleep_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2 DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-30 13:52:46 +00:00
clock-frequency = <400000>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
stusb1600@28 {
compatible = "st,stusb1600";
reg = <0x28>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpioi>;
pinctrl-names = "default";
pinctrl-0 = <&stusb1600_pins_a>;
status = "okay";
vdd-supply = <&vin>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
typec-power-opmode = "default";
port {
con_usbotg_hs_ep: endpoint {
remote-endpoint = <&usbotg_hs_ep>;
};
};
};
};
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
regulators {
compatible = "st,stpmic1-regulators";
buck1-supply = <&vin>;
buck2-supply = <&vin>;
buck3-supply = <&vin>;
buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
ldo2-supply = <&vin>;
ldo3-supply = <&vdd_ddr>;
ldo4-supply = <&vin>;
ldo5-supply = <&vin>;
ldo6-supply = <&v3v3>;
vref_ddr-supply = <&vin>;
boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
vddcore: buck1 {
regulator-name = "vddcore";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd_ddr: buck2 {
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd: buck3 {
regulator-name = "vdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
st,mask-reset;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
v3v3: buck4 {
regulator-name = "v3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-over-current-protection;
regulator-initial-mode = <0>;
};
v1v8_audio: ldo1 {
regulator-name = "v1v8_audio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
interrupts = <IT_CURLIM_LDO1 0>;
};
v3v3_hdmi: ldo2 {
regulator-name = "v3v3_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
interrupts = <IT_CURLIM_LDO2 0>;
};
vtt_ddr: ldo3 {
regulator-name = "vtt_ddr";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <750000>;
regulator-always-on;
regulator-over-current-protection;
};
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
interrupts = <IT_CURLIM_LDO4 0>;
};
vdda: ldo5 {
regulator-name = "vdda";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
interrupts = <IT_CURLIM_LDO5 0>;
regulator-boot-on;
};
v1v2_hdmi: ldo6 {
regulator-name = "v1v2_hdmi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
interrupts = <IT_CURLIM_LDO6 0>;
};
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
};
bst_out: boost {
regulator-name = "bst_out";
interrupts = <IT_OCP_BOOST 0>;
};
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
regulator-active-discharge = <1>;
};
};
onkey {
compatible = "st,stpmic1-onkey";
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
interrupt-names = "onkey-falling", "onkey-rising";
power-off-time-sec = <10>;
status = "okay";
};
watchdog {
compatible = "st,stpmic1-wdt";
status = "disabled";
};
};
};
&i2c5 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_pins_a>;
pinctrl-1 = <&i2c5_sleep_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
clock-frequency = <400000>;
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
};
&i2s2 {
clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
clock-names = "pclk", "i2sclk", "x8k", "x11k";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2s2_pins_a>;
pinctrl-1 = <&i2s2_sleep_pins_a>;
status = "okay";
i2s2_port: port {
i2s2_endpoint: endpoint {
remote-endpoint = <&sii9022_tx_endpoint>;
format = "i2s";
mclk-fs = <256>;
};
};
};
&ipcc {
status = "okay";
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
&ltdc {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&ltdc_pins_a>;
pinctrl-1 = <&ltdc_sleep_pins_a>;
status = "okay";
port {
ltdc_ep0_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&sii9022_in>;
};
};
};
&m4_rproc {
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
<&vdev0vring1>, <&vdev0buffer>;
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
mbox-names = "vq0", "vq1", "shutdown", "detach";
interrupt-parent = <&exti>;
interrupts = <68 1>;
status = "okay";
};
&pwr_regulators {
vdd-supply = <&vdd>;
vdd_3v3_usbfs-supply = <&vdd_usb>;
};
&rng1 {
status = "okay";
};
&rtc {
status = "okay";
};
&sai2 {
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
clock-names = "pclk", "x8k", "x11k";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
status = "okay";
sai2a: audio-controller@4400b004 {
#clock-cells = <0>;
dma-names = "tx";
status = "okay";
sai2a_port: port {
sai2a_endpoint: endpoint {
remote-endpoint = <&cs42l51_tx_endpoint>;
ARM: dts: stm32mp: alignment with v6.3 Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-24 14:21:10 +00:00
dai-format = "i2s";
mclk-fs = <256>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
};
};
sai2b: audio-controller@4400b024 {
dma-names = "rx";
st,sync = <&sai2a 2>;
clocks = <&rcc SAI2_K>, <&sai2a>;
clock-names = "sai_ck", "MCLK";
status = "okay";
sai2b_port: port {
sai2b_endpoint: endpoint {
remote-endpoint = <&cs42l51_rx_endpoint>;
ARM: dts: stm32mp: alignment with v6.3 Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-04-24 14:21:10 +00:00
dai-format = "i2s";
mclk-fs = <256>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
};
};
};
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2 DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-30 13:52:46 +00:00
cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
disable-wp;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3>;
status = "okay";
};
&sdmmc3 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc3_b4_pins_a>;
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
broken-cd;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3>;
status = "disabled";
};
&timers1 {
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm1_pins_a>;
pinctrl-1 = <&pwm1_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@0 {
status = "okay";
};
};
&timers3 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm3_pins_a>;
pinctrl-1 = <&pwm3_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@2 {
status = "okay";
};
};
&timers4 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@3 {
status = "okay";
};
};
&timers5 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm5_pins_a>;
pinctrl-1 = <&pwm5_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@4 {
status = "okay";
};
};
&timers6 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
timer@5 {
status = "okay";
};
};
&timers12 {
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
pwm {
pinctrl-0 = <&pwm12_pins_a>;
pinctrl-1 = <&pwm12_sleep_pins_a>;
pinctrl-names = "default", "sleep";
status = "okay";
};
timer@11 {
status = "okay";
};
};
&uart4 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
/delete-property/dmas;
/delete-property/dma-names;
status = "okay";
};
&uart7 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart7_pins_c>;
pinctrl-1 = <&uart7_sleep_pins_c>;
pinctrl-2 = <&uart7_idle_pins_c>;
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
};
&usart3 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&usart3_pins_c>;
pinctrl-1 = <&usart3_sleep_pins_c>;
pinctrl-2 = <&usart3_idle_pins_c>;
uart-has-rtscts;
status = "disabled";
};
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
/* onboard HUB */
hub@1 {
compatible = "usb424,2514";
reg = <1>;
vdd-supply = <&v3v3>;
};
};
&usbotg_hs {
phys = <&usbphyc_port1 0>;
phy-names = "usb2-phy";
usb-role-switch;
status = "okay";
port {
usbotg_hs_ep: endpoint {
remote-endpoint = <&con_usbotg_hs_ep>;
};
};
};
&usbphyc {
status = "okay";
};
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc;
};
&vrefbuf {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
vdda-supply = <&vdd>;
status = "okay";
};