Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 02:38:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/imx8mn_beacon_defconfig

142 lines
3.5 KiB
Text
Raw Normal View History

imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SYS_MALLOC_F_LEN=0x10000
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
CONFIG_SPL_GPIO=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_MEMTEST_START=0x40000000
CONFIG_SYS_MEMTEST_END=0x44000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx8mn-beacon-kit"
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_SPL_TEXT_BASE=0x912000
CONFIG_TARGET_IMX8MN_BEACON=y
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
CONFIG_SPL_SERIAL=y
Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:31 +00:00
CONFIG_SPL_DRIVERS_MISC=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-25 15:58:50 +00:00
CONFIG_LTO=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 15:25:30 +00:00
CONFIG_REMAKE_ELF=y
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x40480000
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
# CONFIG_USE_SPL_FIT_GENERATOR is not set
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_OF_SYSTEM_SETUP=y
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SEPARATE_BSS=y
Convert CONFIG_CONS_INDEX et al to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:51 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
CONFIG_SPL_I2C=y
Rename SPL_POWER_SUPPORT to SPL_POWER Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-11 03:14:24 +00:00
CONFIG_SPL_POWER=y
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
CONFIG_SPL_WATCHDOG=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="u-boot=> "
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_ERASEENV=y
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
configs: imx8mn_beacon: Enable QSPI Support There is a QSPI chip connected to the FSPI. Enable the defconfig to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-03 03:17:18 +00:00
CONFIG_CMD_SPI=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to Kconfig This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 03:59:38 +00:00
CONFIG_ENV_OVERWRITE=y
imx: imx8mn_beacon: Fix USB booting The i.MX8M Nano can boot over USB using the boot ROM instead of adding extra code to SPL to support USB drivers, etc. However, when booting from USB, the environment doesnt' know where to load and causes a hang. Fix this hang by supporting CONFIG_ENV_IS_NOWHERE=y. It only falls back to this condition when booting from USB, so it does not impact MMC booting. Suggested-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-26 18:25:23 +00:00
CONFIG_ENV_IS_NOWHERE=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_CLK_IMX8MN=y
CONFIG_CLK_IMX8MN=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x42800000
CONFIG_FASTBOOT_BUF_SIZE=0x40000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_MXC_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
configs: imx8mn_beacon: Enable QSPI Support There is a QSPI chip connected to the FSPI. Enable the defconfig to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-03 03:17:18 +00:00
CONFIG_MTD=y
CONFIG_DM_MTD=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
configs: imx8mn_beacon: Enable QSPI Support There is a QSPI chip connected to the FSPI. Enable the defconfig to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-03 03:17:18 +00:00
CONFIG_SPI_FLASH_MTD=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
CONFIG_SPL_PINCTRL=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_PINCTRL_IMX8M=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_PMIC_BD71837=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_BD71837=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_RESET=y
CONFIG_DM_SERIAL=y
# CONFIG_SPL_DM_SERIAL is not set
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
configs: imx8mn_beacon: Enable QSPI Support There is a QSPI chip connected to the FSPI. Enable the defconfig to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-03 03:17:18 +00:00
CONFIG_NXP_FSPI=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_SYSRESET=y
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
CONFIG_SPL_SYSRESET=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_SYSRESET_PSCI=y
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
CONFIG_SYSRESET_WATCHDOG=y
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit. Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-11 12:01:46 +00:00
CONFIG_DM_THERMAL=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_SDP_LOADADDR=0x0
imx8mn_beacon: Fix booting hang and switch to binman Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-09-10 20:19:22 +00:00
CONFIG_IMX_WATCHDOG=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-24 21:08:41 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink