u-boot/common/spl/spl_fit.c

924 lines
24 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#include <common.h>
#include <errno.h>
#include <fpga.h>
#include <gzip.h>
#include <image.h>
#include <log.h>
#include <memalign.h>
#include <mapmem.h>
#include <spl.h>
#include <sysinfo.h>
#include <asm/cache.h>
#include <asm/global_data.h>
#include <linux/libfdt.h>
#include <linux/printk.h>
2019-08-21 19:14:42 +00:00
DECLARE_GLOBAL_DATA_PTR;
struct spl_fit_info {
const void *fit; /* Pointer to a valid FIT blob */
size_t ext_data_offset; /* Offset to FIT external data (end of FIT) */
int images_node; /* FDT offset to "/images" node */
int conf_node; /* FDT offset to selected configuration node */
};
__weak ulong board_spl_fit_size_align(ulong size)
{
return size;
}
static int find_node_from_desc(const void *fit, int node, const char *str)
{
int child;
if (node < 0)
return -EINVAL;
/* iterate the FIT nodes and find a matching description */
for (child = fdt_first_subnode(fit, node); child >= 0;
child = fdt_next_subnode(fit, child)) {
int len;
const char *desc = fdt_getprop(fit, child, FIT_DESC_PROP, &len);
if (!desc)
continue;
if (!strcmp(desc, str))
return child;
}
return -ENOENT;
}
/**
* spl_fit_get_image_name(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
* @outname: Name of the image
*
* Return: 0 on success, or a negative error number
*/
static int spl_fit_get_image_name(const struct spl_fit_info *ctx,
const char *type, int index,
const char **outname)
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
{
struct udevice *sysinfo;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
const char *name, *str;
__maybe_unused int node;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
int len, i;
bool found = true;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
name = fdt_getprop(ctx->fit, ctx->conf_node, type, &len);
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
if (!name) {
debug("cannot find property '%s': %d\n", type, len);
return -EINVAL;
}
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
str = name;
for (i = 0; i < index; i++) {
str = strchr(str, '\0') + 1;
if (!str || (str - name >= len)) {
found = false;
break;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
}
}
if (!found && CONFIG_IS_ENABLED(SYSINFO) && !sysinfo_get(&sysinfo)) {
int rc;
/*
* no string in the property for this index. Check if the
* sysinfo-level code can supply one.
*/
rc = sysinfo_detect(sysinfo);
if (rc)
return rc;
rc = sysinfo_get_fit_loadable(sysinfo, index - i - 1, type,
&str);
if (rc && rc != -ENOENT)
return rc;
if (!rc) {
/*
* The sysinfo provided a name for a loadable.
* Try to match it against the description properties
* first. If no matching node is found, use it as a
* node name.
*/
int node;
int images = fdt_path_offset(ctx->fit, FIT_IMAGES_PATH);
node = find_node_from_desc(ctx->fit, images, str);
if (node > 0)
str = fdt_get_name(ctx->fit, node, NULL);
found = true;
}
}
if (!found) {
debug("no string for index %d\n", index);
return -E2BIG;
}
*outname = str;
return 0;
}
/**
* spl_fit_get_image_node(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
*
* Return: the node offset of the respective image node or a negative
* error number.
*/
static int spl_fit_get_image_node(const struct spl_fit_info *ctx,
const char *type, int index)
{
const char *str;
int err;
int node;
err = spl_fit_get_image_name(ctx, type, index, &str);
if (err)
return err;
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
debug("%s: '%s'\n", type, str);
node = fdt_subnode_offset(ctx->fit, ctx->images_node, str);
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
if (node < 0) {
pr_err("cannot find image node '%s': %d\n", str, node);
SPL: FIT: refactor FDT loading Currently the SPL FIT loader uses the spl_fit_select_fdt() function to find the offset to the right DTB within the FIT image. For this it iterates over all subnodes of the /configuration node in the FIT tree and compares all "description" strings therein using a board specific matching function. If that finds a match, it uses the string in the "fdt" property of that subnode to locate the matching subnode in the /images node, which points to the DTB data. Now this works very well, but is quite specific to cover this particular use case. To open up the door for a more generic usage, let's split this function into: 1) a function that just returns the node offset for the matching configuration node (spl_fit_find_config_node()) 2) a function that returns the image data any given property in a given configuration node points to, additionally using a given index into a possbile list of strings (spl_fit_select_index()) This allows us to replace the specific function above by asking for the image the _first string of the "fdt" property_ in the matching configuration subnode points to. This patch introduces no functional changes, it just refactors the code to allow reusing it later. (diff is overly clever here and produces a hard-to-read patch, so I recommend to throw a look at the result instead). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Jagan Teki <jagan@openedev.com>
2017-04-26 00:32:33 +00:00
return -EINVAL;
}
return node;
}
static int get_aligned_image_offset(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the first address before offset which is
* aligned to ARCH_DMA_MINALIGN. If it is raw read return the
* block number to which offset belongs.
*/
if (info->filename)
return offset & ~(ARCH_DMA_MINALIGN - 1);
return offset / info->bl_len;
}
static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the difference between the offset and
* the first address before offset which is aligned to
* ARCH_DMA_MINALIGN. If it is raw read return the offset within the
* block.
*/
if (info->filename)
return offset & (ARCH_DMA_MINALIGN - 1);
return offset % info->bl_len;
}
static int get_aligned_image_size(struct spl_load_info *info, int data_size,
int offset)
{
data_size = data_size + get_aligned_image_overhead(info, offset);
if (info->filename)
return data_size;
return (data_size + info->bl_len - 1) / info->bl_len;
}
/**
* load_simple_fit(): load the image described in a certain FIT node
* @info: points to information about the device to load data from
* @sector: the start sector of the FIT image on the device
* @ctx: points to the FIT context structure
* @node: offset of the DT node describing the image to load (relative
* to @fit)
* @image_info: will be filled with information about the loaded image
* If the FIT node does not contain a "load" (address) property,
* the image gets loaded to the address pointed to by the
* load_addr member in this struct, if load_addr is not 0
*
* Return: 0 on success or a negative error number.
*/
static int load_simple_fit(struct spl_load_info *info, ulong sector,
const struct spl_fit_info *ctx, int node,
struct spl_image_info *image_info)
{
int offset;
size_t length;
int len;
ulong size;
ulong load_addr;
void *load_ptr;
void *src;
ulong overhead;
int nr_sectors;
uint8_t image_comp = -1, type = -1;
const void *data;
const void *fit = ctx->fit;
bool external_data = false;
if (IS_ENABLED(CONFIG_SPL_FPGA) ||
(IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP))) {
if (fit_image_get_type(fit, node, &type))
puts("Cannot get image type.\n");
else
debug("%s ", genimg_get_type_name(type));
}
if (IS_ENABLED(CONFIG_SPL_GZIP)) {
fit_image_get_comp(fit, node, &image_comp);
debug("%s ", genimg_get_comp_name(image_comp));
}
if (fit_image_get_load(fit, node, &load_addr)) {
if (!image_info->load_addr) {
printf("Can't load %s: No load address and no buffer\n",
fit_get_name(fit, node, NULL));
return -ENOBUFS;
}
load_addr = image_info->load_addr;
}
if (!fit_image_get_data_position(fit, node, &offset)) {
external_data = true;
} else if (!fit_image_get_data_offset(fit, node, &offset)) {
offset += ctx->ext_data_offset;
external_data = true;
}
if (external_data) {
void *src_ptr;
/* External data */
if (fit_image_get_data_size(fit, node, &len))
return -ENOENT;
/* Dont bother to copy 0 byte data, but warn, though */
if (!len) {
log_warning("%s: Skip load '%s': image size is 0!\n",
__func__, fit_get_name(fit, node, NULL));
return 0;
}
src_ptr = map_sysmem(ALIGN(load_addr, ARCH_DMA_MINALIGN), len);
length = len;
overhead = get_aligned_image_overhead(info, offset);
nr_sectors = get_aligned_image_size(info, length, offset);
if (info->read(info,
sector + get_aligned_image_offset(info, offset),
nr_sectors, src_ptr) != nr_sectors)
return -EIO;
debug("External data: dst=%p, offset=%x, size=%lx\n",
src_ptr, offset, (unsigned long)length);
src = src_ptr + overhead;
} else {
/* Embedded data */
if (fit_image_get_data(fit, node, &data, &length)) {
puts("Cannot get image data/size\n");
return -ENOENT;
}
debug("Embedded data: dst=%lx, size=%lx\n", load_addr,
(unsigned long)length);
src = (void *)data; /* cast away const */
}
if (CONFIG_IS_ENABLED(FIT_SIGNATURE)) {
printf("## Checking hash(es) for Image %s ... ",
fit_get_name(fit, node, NULL));
if (!fit_image_verify_with_data(fit, node, gd_fdt_blob(), src,
length))
return -EPERM;
puts("OK\n");
}
if (CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS))
board_fit_image_post_process(fit, node, &src, &length);
load_ptr = map_sysmem(load_addr, length);
if (IS_ENABLED(CONFIG_SPL_GZIP) && image_comp == IH_COMP_GZIP) {
size = length;
if (gunzip(load_ptr, CONFIG_SYS_BOOTM_LEN, src, &size)) {
puts("Uncompressing error\n");
return -EIO;
}
length = size;
} else {
memcpy(load_ptr, src, length);
}
if (image_info) {
ulong entry_point;
image_info->load_addr = load_addr;
image_info->size = length;
if (!fit_image_get_entry(fit, node, &entry_point))
image_info->entry_point = entry_point;
else
image_info->entry_point = FDT_ERROR;
}
return 0;
}
static bool os_takes_devicetree(uint8_t os)
{
switch (os) {
case IH_OS_U_BOOT:
return true;
case IH_OS_LINUX:
return IS_ENABLED(CONFIG_SPL_OS_BOOT);
default:
return false;
}
}
static int spl_fit_append_fdt(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector,
const struct spl_fit_info *ctx)
{
struct spl_image_info image_info;
int node, ret = 0, index = 0;
2019-08-21 19:14:42 +00:00
/*
* Use the address following the image as target address for the
* device tree.
2019-08-21 19:14:42 +00:00
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(ctx, FIT_FDT_PROP, index++);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
2019-08-21 19:14:42 +00:00
/*
* U-Boot did not find a device tree inside the FIT image. Use
* the U-Boot device tree instead.
*/
if (gd->fdt_blob)
memcpy((void *)image_info.load_addr, gd->fdt_blob,
fdt_totalsize(gd->fdt_blob));
else
return node;
} else {
ret = load_simple_fit(info, sector, ctx, node, &image_info);
2019-08-21 19:14:42 +00:00
if (ret < 0)
return ret;
}
/* Make the load-address of the FDT available for the SPL framework */
spl_image->fdt_addr = map_sysmem(image_info.load_addr, 0);
if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY))
return 0;
#if CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)
void *tmpbuffer = NULL;
for (; ; index++) {
node = spl_fit_get_image_node(ctx, FIT_FDT_PROP, index);
if (node == -E2BIG) {
debug("%s: No additional FDT node\n", __func__);
break;
} else if (node < 0) {
debug("%s: unable to find FDT node %d\n",
__func__, index);
continue;
}
if (!tmpbuffer) {
/*
* allocate memory to store the DT overlay
* before it is applied. It may not be used
* depending on how the overlay is stored, so
* don't fail yet if the allocation failed.
*/
size_t size = CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ;
tmpbuffer = malloc_cache_aligned(size);
if (!tmpbuffer)
debug("%s: unable to allocate space for overlays\n",
__func__);
}
image_info.load_addr = (ulong)tmpbuffer;
ret = load_simple_fit(info, sector, ctx, node,
&image_info);
if (ret < 0)
break;
/* Make room in FDT for changes from the overlay */
ret = fdt_increase_size(spl_image->fdt_addr,
image_info.size);
if (ret < 0)
break;
ret = fdt_overlay_apply_verbose(spl_image->fdt_addr,
(void *)image_info.load_addr);
if (ret) {
pr_err("failed to apply DT overlay %s\n",
fit_get_name(ctx->fit, node, NULL));
break;
}
debug("%s: DT overlay %s applied\n", __func__,
fit_get_name(ctx->fit, node, NULL));
}
free(tmpbuffer);
if (ret)
return ret;
#endif
/* Try to make space, so we can inject details on the loadables */
ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
if (ret < 0)
return ret;
return ret;
}
static int spl_fit_record_loadable(const struct spl_fit_info *ctx, int index,
void *blob, struct spl_image_info *image)
{
int ret = 0;
const char *name;
int node;
if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY))
return 0;
ret = spl_fit_get_image_name(ctx, "loadables", index, &name);
if (ret < 0)
return ret;
node = spl_fit_get_image_node(ctx, "loadables", index);
ret = fdt_record_loadable(blob, index, name, image->load_addr,
image->size, image->entry_point,
fdt_getprop(ctx->fit, node, FIT_TYPE_PROP, NULL),
fdt_getprop(ctx->fit, node, FIT_OS_PROP, NULL),
fdt_getprop(ctx->fit, node, FIT_ARCH_PROP, NULL));
return ret;
}
static int spl_fit_image_is_fpga(const void *fit, int node)
{
const char *type;
if (!IS_ENABLED(CONFIG_SPL_FPGA))
return 0;
type = fdt_getprop(fit, node, FIT_TYPE_PROP, NULL);
if (!type)
return 0;
return !strcmp(type, "fpga");
}
static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
{
if (!CONFIG_IS_ENABLED(FIT_IMAGE_TINY) || CONFIG_IS_ENABLED(OS_BOOT))
return fit_image_get_os(fit, noffset, os);
2020-10-22 02:12:13 +00:00
const char *name = fdt_getprop(fit, noffset, FIT_OS_PROP, NULL);
2020-10-22 02:12:13 +00:00
if (!name)
return -ENOENT;
/*
* We don't care what the type of the image actually is,
* only whether or not it is U-Boot. This saves some
* space by omitting the large table of OS types.
*/
if (!strcmp(name, "u-boot"))
*os = IH_OS_U_BOOT;
else
*os = IH_OS_INVALID;
return 0;
}
spl: fit: Prefer a malloc()'d buffer for loading images Fit images were loaded to a buffer provided by spl_get_load_buffer(). This may work when the FIT image is small and fits between the start of DRAM and SYS_TEXT_BASE. One problem with this approach is that the location of the buffer may be manipulated by changing the 'size' field of the FIT. A maliciously crafted FIT image could place the buffer over executable code and be able to take control of SPL. This is unacceptable for secure boot of signed FIT images. Another problem is with larger FIT images, usually containing one or more linux kernels. In such cases the buffer be be large enough so as to start before DRAM (Figure I). Trying to load an image in this case has undefined behavior. For example, on stm32mp1, the MMC controller hits a RX overrun error, and aborts loading. _________________ | FIT Image | | | /===================\ /=====================\ || DRAM || | DRAM | || || | | ||_________________|| SYS_TEXT_BASE | ___________________ | | | || FIT Image || | | || || | _________________ | SYS_SPL_MALLOC_START || _________________ || || malloc() data || ||| malloc() data ||| ||_________________|| |||_________________||| | | ||___________________|| | | | | Figure I Figure II One possibility that was analyzed was to remove the negative offset, such that the buffer starts at SYS_TEXT_BASE. This is not a proper solution because on a number of platforms, the malloc buffer() is placed at a fixed address, usually after SYS_TEXT_BASE. A large enough FIT image could cause the malloc()'d data to be overwritten (Figure II) when loading. /======================\ | DRAM | | | | | CONFIG_SYS_TEXT_BASE | | | | | ____________________ | CONFIG_SYS_SPL_MALLOC_START || malloc() data || || || || __________________ || ||| FIT Image ||| ||| ||| ||| ||| Figure III The solution proposed here is to replace the ad-hoc heuristics of spl_get_load_buffer() with malloc(). This provides two advantages: * Bounds checking of the buffer region * Guarantees the buffer does not conflict with other memory The first problem is solved by constraining the buffer such that it will not overlap currently executing code. This eliminates the chance of a malicious FIT being able to replace the executing SPL code prior to signature checking. The second problem is solved in conjunction with increasing CONFIG_SYS_SPL_MALLOC_SIZE. Since the SPL malloc() region is carefully crafted on a per-platform basis, the chances of memory conflicts are virtually eliminated. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2020-10-21 23:32:58 +00:00
/*
* The purpose of the FIT load buffer is to provide a memory location that is
* independent of the load address of any FIT component.
*/
static void *spl_get_fit_load_buffer(size_t size)
{
void *buf;
buf = malloc_cache_aligned(size);
spl: fit: Prefer a malloc()'d buffer for loading images Fit images were loaded to a buffer provided by spl_get_load_buffer(). This may work when the FIT image is small and fits between the start of DRAM and SYS_TEXT_BASE. One problem with this approach is that the location of the buffer may be manipulated by changing the 'size' field of the FIT. A maliciously crafted FIT image could place the buffer over executable code and be able to take control of SPL. This is unacceptable for secure boot of signed FIT images. Another problem is with larger FIT images, usually containing one or more linux kernels. In such cases the buffer be be large enough so as to start before DRAM (Figure I). Trying to load an image in this case has undefined behavior. For example, on stm32mp1, the MMC controller hits a RX overrun error, and aborts loading. _________________ | FIT Image | | | /===================\ /=====================\ || DRAM || | DRAM | || || | | ||_________________|| SYS_TEXT_BASE | ___________________ | | | || FIT Image || | | || || | _________________ | SYS_SPL_MALLOC_START || _________________ || || malloc() data || ||| malloc() data ||| ||_________________|| |||_________________||| | | ||___________________|| | | | | Figure I Figure II One possibility that was analyzed was to remove the negative offset, such that the buffer starts at SYS_TEXT_BASE. This is not a proper solution because on a number of platforms, the malloc buffer() is placed at a fixed address, usually after SYS_TEXT_BASE. A large enough FIT image could cause the malloc()'d data to be overwritten (Figure II) when loading. /======================\ | DRAM | | | | | CONFIG_SYS_TEXT_BASE | | | | | ____________________ | CONFIG_SYS_SPL_MALLOC_START || malloc() data || || || || __________________ || ||| FIT Image ||| ||| ||| ||| ||| Figure III The solution proposed here is to replace the ad-hoc heuristics of spl_get_load_buffer() with malloc(). This provides two advantages: * Bounds checking of the buffer region * Guarantees the buffer does not conflict with other memory The first problem is solved by constraining the buffer such that it will not overlap currently executing code. This eliminates the chance of a malicious FIT being able to replace the executing SPL code prior to signature checking. The second problem is solved in conjunction with increasing CONFIG_SYS_SPL_MALLOC_SIZE. Since the SPL malloc() region is carefully crafted on a per-platform basis, the chances of memory conflicts are virtually eliminated. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2020-10-21 23:32:58 +00:00
if (!buf) {
pr_err("Could not get FIT buffer of %lu bytes\n", (ulong)size);
pr_err("\tcheck CONFIG_SPL_SYS_MALLOC_SIZE\n");
spl: fit: Prefer a malloc()'d buffer for loading images Fit images were loaded to a buffer provided by spl_get_load_buffer(). This may work when the FIT image is small and fits between the start of DRAM and SYS_TEXT_BASE. One problem with this approach is that the location of the buffer may be manipulated by changing the 'size' field of the FIT. A maliciously crafted FIT image could place the buffer over executable code and be able to take control of SPL. This is unacceptable for secure boot of signed FIT images. Another problem is with larger FIT images, usually containing one or more linux kernels. In such cases the buffer be be large enough so as to start before DRAM (Figure I). Trying to load an image in this case has undefined behavior. For example, on stm32mp1, the MMC controller hits a RX overrun error, and aborts loading. _________________ | FIT Image | | | /===================\ /=====================\ || DRAM || | DRAM | || || | | ||_________________|| SYS_TEXT_BASE | ___________________ | | | || FIT Image || | | || || | _________________ | SYS_SPL_MALLOC_START || _________________ || || malloc() data || ||| malloc() data ||| ||_________________|| |||_________________||| | | ||___________________|| | | | | Figure I Figure II One possibility that was analyzed was to remove the negative offset, such that the buffer starts at SYS_TEXT_BASE. This is not a proper solution because on a number of platforms, the malloc buffer() is placed at a fixed address, usually after SYS_TEXT_BASE. A large enough FIT image could cause the malloc()'d data to be overwritten (Figure II) when loading. /======================\ | DRAM | | | | | CONFIG_SYS_TEXT_BASE | | | | | ____________________ | CONFIG_SYS_SPL_MALLOC_START || malloc() data || || || || __________________ || ||| FIT Image ||| ||| ||| ||| ||| Figure III The solution proposed here is to replace the ad-hoc heuristics of spl_get_load_buffer() with malloc(). This provides two advantages: * Bounds checking of the buffer region * Guarantees the buffer does not conflict with other memory The first problem is solved by constraining the buffer such that it will not overlap currently executing code. This eliminates the chance of a malicious FIT being able to replace the executing SPL code prior to signature checking. The second problem is solved in conjunction with increasing CONFIG_SYS_SPL_MALLOC_SIZE. Since the SPL malloc() region is carefully crafted on a per-platform basis, the chances of memory conflicts are virtually eliminated. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2020-10-21 23:32:58 +00:00
buf = spl_get_load_buffer(0, size);
}
return buf;
}
__weak void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len)
{
return spl_get_fit_load_buffer(sectors * bl_len);
}
/*
* Weak default function to allow customizing SPL fit loading for load-only
* use cases by allowing to skip the parsing/processing of the FIT contents
* (so that this can be done separately in a more customized fashion)
*/
__weak bool spl_load_simple_fit_skip_processing(void)
{
return false;
}
/*
* Weak default function to allow fixes after fit header
* is loaded.
*/
__weak void *spl_load_simple_fit_fix_load(const void *fit)
{
return (void *)fit;
}
static void warn_deprecated(const char *msg)
{
printf("DEPRECATED: %s\n", msg);
printf("\tSee doc/uImage.FIT/source_file_format.txt\n");
}
static int spl_fit_upload_fpga(struct spl_fit_info *ctx, int node,
struct spl_image_info *fpga_image)
{
const char *compatible;
int ret;
int devnum = 0;
int flags = 0;
debug("FPGA bitstream at: %x, size: %x\n",
(u32)fpga_image->load_addr, fpga_image->size);
compatible = fdt_getprop(ctx->fit, node, "compatible", NULL);
if (!compatible) {
warn_deprecated("'fpga' image without 'compatible' property");
} else {
if (CONFIG_IS_ENABLED(FPGA_LOAD_SECURE))
flags = fpga_compatible2flag(devnum, compatible);
if (strcmp(compatible, "u-boot,fpga-legacy"))
debug("Ignoring compatible = %s property\n",
compatible);
}
ret = fpga_load(devnum, (void *)fpga_image->load_addr,
fpga_image->size, BIT_FULL, flags);
if (ret) {
printf("%s: Cannot load the image to the FPGA\n", __func__);
return ret;
}
puts("FPGA image loaded from FIT\n");
return 0;
}
static int spl_fit_load_fpga(struct spl_fit_info *ctx,
struct spl_load_info *info, ulong sector)
{
int node, ret;
struct spl_image_info fpga_image = {
.load_addr = 0,
};
node = spl_fit_get_image_node(ctx, "fpga", 0);
if (node < 0)
return node;
warn_deprecated("'fpga' property in config node. Use 'loadables'");
/* Load the image and set up the fpga_image structure */
ret = load_simple_fit(info, sector, ctx, node, &fpga_image);
if (ret) {
printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
return ret;
}
return spl_fit_upload_fpga(ctx, node, &fpga_image);
}
static int spl_simple_fit_read(struct spl_fit_info *ctx,
struct spl_load_info *info, ulong sector,
const void *fit_header)
{
unsigned long count, size;
int sectors;
void *buf;
/*
* For FIT with external data, figure out where the external images
* start. This is the base for the data-offset properties in each
* image.
*/
size = ALIGN(fdt_totalsize(fit_header), 4);
size = board_spl_fit_size_align(size);
ctx->ext_data_offset = ALIGN(size, 4);
/*
* So far we only have one block of data from the FIT. Read the entire
spl: fit: Prefer a malloc()'d buffer for loading images Fit images were loaded to a buffer provided by spl_get_load_buffer(). This may work when the FIT image is small and fits between the start of DRAM and SYS_TEXT_BASE. One problem with this approach is that the location of the buffer may be manipulated by changing the 'size' field of the FIT. A maliciously crafted FIT image could place the buffer over executable code and be able to take control of SPL. This is unacceptable for secure boot of signed FIT images. Another problem is with larger FIT images, usually containing one or more linux kernels. In such cases the buffer be be large enough so as to start before DRAM (Figure I). Trying to load an image in this case has undefined behavior. For example, on stm32mp1, the MMC controller hits a RX overrun error, and aborts loading. _________________ | FIT Image | | | /===================\ /=====================\ || DRAM || | DRAM | || || | | ||_________________|| SYS_TEXT_BASE | ___________________ | | | || FIT Image || | | || || | _________________ | SYS_SPL_MALLOC_START || _________________ || || malloc() data || ||| malloc() data ||| ||_________________|| |||_________________||| | | ||___________________|| | | | | Figure I Figure II One possibility that was analyzed was to remove the negative offset, such that the buffer starts at SYS_TEXT_BASE. This is not a proper solution because on a number of platforms, the malloc buffer() is placed at a fixed address, usually after SYS_TEXT_BASE. A large enough FIT image could cause the malloc()'d data to be overwritten (Figure II) when loading. /======================\ | DRAM | | | | | CONFIG_SYS_TEXT_BASE | | | | | ____________________ | CONFIG_SYS_SPL_MALLOC_START || malloc() data || || || || __________________ || ||| FIT Image ||| ||| ||| ||| ||| Figure III The solution proposed here is to replace the ad-hoc heuristics of spl_get_load_buffer() with malloc(). This provides two advantages: * Bounds checking of the buffer region * Guarantees the buffer does not conflict with other memory The first problem is solved by constraining the buffer such that it will not overlap currently executing code. This eliminates the chance of a malicious FIT being able to replace the executing SPL code prior to signature checking. The second problem is solved in conjunction with increasing CONFIG_SYS_SPL_MALLOC_SIZE. Since the SPL malloc() region is carefully crafted on a per-platform basis, the chances of memory conflicts are virtually eliminated. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2020-10-21 23:32:58 +00:00
* thing, including that first block.
*
* For FIT with data embedded, data is loaded as part of FIT image.
* For FIT with external data, data is not loaded in this step.
*/
sectors = get_aligned_image_size(info, size, 0);
buf = board_spl_fit_buffer_addr(size, sectors, info->bl_len);
count = info->read(info, sector, sectors, buf);
ctx->fit = buf;
debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu, size=0x%lx\n",
sector, sectors, buf, count, size);
return (count == 0) ? -EIO : 0;
}
static int spl_simple_fit_parse(struct spl_fit_info *ctx)
{
/* Find the correct subnode under "/configurations" */
ctx->conf_node = fit_find_config_node(ctx->fit);
if (ctx->conf_node < 0)
return -EINVAL;
if (IS_ENABLED(CONFIG_SPL_FIT_SIGNATURE)) {
printf("## Checking hash(es) for config %s ... ",
fit_get_name(ctx->fit, ctx->conf_node, NULL));
if (fit_config_verify(ctx->fit, ctx->conf_node))
return -EPERM;
puts("OK\n");
}
/* find the node holding the images information */
ctx->images_node = fdt_path_offset(ctx->fit, FIT_IMAGES_PATH);
if (ctx->images_node < 0) {
debug("%s: Cannot find /images node: %d\n", __func__,
ctx->images_node);
return -EINVAL;
}
return 0;
}
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
struct spl_image_info image_info;
struct spl_fit_info ctx;
int node = -1;
int ret;
int index = 0;
int firmware_node;
ret = spl_simple_fit_read(&ctx, info, sector, fit);
if (ret < 0)
return ret;
/* skip further processing if requested to enable load-only use cases */
if (spl_load_simple_fit_skip_processing())
return 0;
ctx.fit = spl_load_simple_fit_fix_load(ctx.fit);
ret = spl_simple_fit_parse(&ctx);
if (ret < 0)
return ret;
if (IS_ENABLED(CONFIG_SPL_FPGA))
spl_fit_load_fpga(&ctx, info, sector);
/*
* Find the U-Boot image using the following search order:
* - start at 'firmware' (e.g. an ARM Trusted Firmware)
* - fall back 'kernel' (e.g. a Falcon-mode OS boot
* - fall back to using the first 'loadables' entry
*/
if (node < 0)
node = spl_fit_get_image_node(&ctx, FIT_FIRMWARE_PROP, 0);
if (node < 0 && IS_ENABLED(CONFIG_SPL_OS_BOOT))
node = spl_fit_get_image_node(&ctx, FIT_KERNEL_PROP, 0);
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(&ctx, "loadables", 0);
/*
* If we pick the U-Boot image from "loadables", start at
* the second image when later loading additional images.
*/
index = 1;
}
if (node < 0) {
debug("%s: Cannot find u-boot image node: %d\n",
__func__, node);
return -1;
}
/* Load the image and set up the spl_image structure */
ret = load_simple_fit(info, sector, &ctx, node, spl_image);
if (ret)
return ret;
/*
* For backward compatibility, we treat the first node that is
* as a U-Boot image, if no OS-type has been declared.
*/
if (!spl_fit_image_get_os(ctx.fit, node, &spl_image->os))
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
else if (!IS_ENABLED(CONFIG_SPL_OS_BOOT))
spl_image->os = IH_OS_U_BOOT;
/*
* Booting a next-stage U-Boot may require us to append the FDT.
* We allow this to fail, as the U-Boot image might embed its FDT.
*/
if (os_takes_devicetree(spl_image->os)) {
ret = spl_fit_append_fdt(spl_image, info, sector, &ctx);
if (ret < 0 && spl_image->os != IH_OS_U_BOOT)
return ret;
}
firmware_node = node;
/* Now check if there are more images for us to load */
for (; ; index++) {
uint8_t os_type = IH_OS_INVALID;
node = spl_fit_get_image_node(&ctx, "loadables", index);
if (node < 0)
break;
/*
* if the firmware is also a loadable, skip it because
* it already has been loaded. This is typically the case with
* u-boot.img generated by mkimage.
*/
if (firmware_node == node)
continue;
image_info.load_addr = 0;
ret = load_simple_fit(info, sector, &ctx, node, &image_info);
if (ret < 0) {
printf("%s: can't load image loadables index %d (ret = %d)\n",
__func__, index, ret);
return ret;
}
if (spl_fit_image_is_fpga(ctx.fit, node))
spl_fit_upload_fpga(&ctx, node, &image_info);
if (!spl_fit_image_get_os(ctx.fit, node, &os_type))
debug("Loadable is %s\n", genimg_get_os_name(os_type));
if (os_takes_devicetree(os_type)) {
spl_fit_append_fdt(&image_info, info, sector, &ctx);
spl_image->fdt_addr = image_info.fdt_addr;
}
/*
* If the "firmware" image did not provide an entry point,
* use the first valid entry point from the loadables.
*/
if (spl_image->entry_point == FDT_ERROR &&
image_info.entry_point != FDT_ERROR)
spl_image->entry_point = image_info.entry_point;
/* Record our loadables into the FDT */
if (spl_image->fdt_addr)
spl_fit_record_loadable(&ctx, index,
spl_image->fdt_addr,
&image_info);
}
/*
* If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
* Makefile will set it to 0 and it will end up as the entry point
* here. What it actually means is: use the load address.
*/
if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
spl_image->entry_point = spl_image->load_addr;
spl_image->flags |= SPL_FIT_FOUND;
return 0;
}
/* Parse and load full fitImage in SPL */
int spl_load_fit_image(struct spl_image_info *spl_image,
const struct legacy_img_hdr *header)
{
struct bootm_headers images;
const char *fit_uname_config = NULL;
uintptr_t fdt_hack;
const char *uname;
ulong fw_data = 0, dt_data = 0, img_data = 0;
ulong fw_len = 0, dt_len = 0, img_len = 0;
int idx, conf_noffset;
int ret;
#ifdef CONFIG_SPL_FIT_SIGNATURE
images.verify = 1;
#endif
ret = fit_image_load(&images, (ulong)header,
NULL, &fit_uname_config,
IH_ARCH_DEFAULT, IH_TYPE_STANDALONE, -1,
FIT_LOAD_OPTIONAL, &fw_data, &fw_len);
if (ret >= 0) {
printf("DEPRECATED: 'standalone = ' property.");
printf("Please use either 'firmware =' or 'kernel ='\n");
} else {
ret = fit_image_load(&images, (ulong)header, NULL,
&fit_uname_config, IH_ARCH_DEFAULT,
IH_TYPE_FIRMWARE, -1, FIT_LOAD_OPTIONAL,
&fw_data, &fw_len);
}
if (ret < 0) {
ret = fit_image_load(&images, (ulong)header, NULL,
&fit_uname_config, IH_ARCH_DEFAULT,
IH_TYPE_KERNEL, -1, FIT_LOAD_OPTIONAL,
&fw_data, &fw_len);
}
if (ret < 0)
return ret;
spl_image->size = fw_len;
spl_image->entry_point = fw_data;
spl_image->load_addr = fw_data;
if (fit_image_get_os(header, ret, &spl_image->os))
spl_image->os = IH_OS_INVALID;
spl_image->name = genimg_get_os_name(spl_image->os);
debug(SPL_TPL_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n",
spl_image->name, spl_image->load_addr, spl_image->size);
#ifdef CONFIG_SPL_FIT_SIGNATURE
images.verify = 1;
#endif
ret = fit_image_load(&images, (ulong)header, NULL, &fit_uname_config,
IH_ARCH_DEFAULT, IH_TYPE_FLATDT, -1,
FIT_LOAD_OPTIONAL, &dt_data, &dt_len);
if (ret >= 0) {
spl_image->fdt_addr = (void *)dt_data;
if (spl_image->os == IH_OS_U_BOOT) {
/* HACK: U-Boot expects FDT at a specific address */
fdt_hack = spl_image->load_addr + spl_image->size;
fdt_hack = (fdt_hack + 3) & ~3;
debug("Relocating FDT to %p\n", spl_image->fdt_addr);
memcpy((void *)fdt_hack, spl_image->fdt_addr, dt_len);
}
}
conf_noffset = fit_conf_get_node((const void *)header,
fit_uname_config);
if (conf_noffset < 0)
return 0;
for (idx = 0;
uname = fdt_stringlist_get((const void *)header, conf_noffset,
FIT_LOADABLE_PROP, idx,
NULL), uname;
idx++) {
#ifdef CONFIG_SPL_FIT_SIGNATURE
images.verify = 1;
#endif
ret = fit_image_load(&images, (ulong)header,
&uname, &fit_uname_config,
IH_ARCH_DEFAULT, IH_TYPE_LOADABLE, -1,
FIT_LOAD_OPTIONAL_NON_ZERO,
&img_data, &img_len);
if (ret < 0)
return ret;
}
return 0;
}