u-boot/arch/x86/cpu/apollolake/fsp_m.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2019 Google LLC
 * Written by Simon Glass <sjg@chromium.org>
 */

#include <common.h>
#include <dm.h>
#include <log.h>
#include <asm/arch/iomap.h>
#include <asm/arch/fsp/fsp_configs.h>
#include <asm/arch/fsp/fsp_m_upd.h>
#include <asm/fsp2/fsp_internal.h>
#include <dm/uclass-internal.h>

/*
 * ODT settings:
 * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B,
 * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A
 * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW.
 *
 * Note that the enum values correspond to the interpreted UPD fields
 * within Ch[3:0]_OdtConfig parameters.
 */
enum {
	ODT_A_B_HIGH_LOW	= 0 << 1,
	ODT_A_B_HIGH_HIGH	= 1 << 1,
	N_WR_24			= 1 << 5,
};

/*
 * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation.
 * There are four physical LPDDR4 channels, each 32-bits wide. There are two
 * logical channels using two physical channels together to form a 64-bit
 * interface to memory for each logical channel.
 */

enum {
	LP4_PHYS_CH0A,
	LP4_PHYS_CH0B,
	LP4_PHYS_CH1A,
	LP4_PHYS_CH1B,

	LP4_NUM_PHYS_CHANNELS,
};

/*
 * The DQs within a physical channel can be bit-swizzled within each byte.
 * Within a channel the bytes can be swapped, but the DQs need to be routed
 * with the corresponding DQS (strobe).
 */
enum {
	LP4_DQS0,
	LP4_DQS1,
	LP4_DQS2,
	LP4_DQS3,

	LP4_NUM_BYTE_LANES,
	DQ_BITS_PER_DQS		= 8,
};

/* Provide bit swizzling per DQS and byte swapping within a channel */
struct lpddr4_chan_swizzle_cfg {
	u8 dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS];
};

struct lpddr4_swizzle_cfg {
	struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS];
};

static void setup_sdram(struct fsp_m_config *cfg,
			const struct lpddr4_swizzle_cfg *swizzle_cfg)
{
	const struct lpddr4_chan_swizzle_cfg *sch;
	/* Number of bytes to copy per DQS */
	const size_t sz = DQ_BITS_PER_DQS;
	int chan;

	cfg->memory_down = 1;
	cfg->scrambler_support = 1;
	cfg->channel_hash_mask = 0x36;
	cfg->slice_hash_mask = 9;
	cfg->interleaved_mode = 2;
	cfg->channels_slices_enable = 0;
	cfg->min_ref_rate2x_enable = 0;
	cfg->dual_rank_support_enable = 1;

	/* LPDDR4 is memory down so no SPD addresses */
	cfg->dimm0_spd_address = 0;
	cfg->dimm1_spd_address = 0;

	for (chan = 0; chan < 4; chan++) {
		struct fsp_ram_channel *ch = &cfg->chan[chan];

		ch->rank_enable = 1;
		ch->device_width = 1;
		ch->dram_density = 2;
		ch->option = 3;
		ch->odt_config = ODT_A_B_HIGH_HIGH;
	}

	/*
	 * CH0_DQB byte lanes in the bit swizzle configuration field are
	 * not 1:1. The mapping within the swizzling field is:
	 *   indices [0:7]   - byte lane 1 (DQS1) DQ[8:15]
	 *   indices [8:15]  - byte lane 0 (DQS0) DQ[0:7]
	 *   indices [16:23] - byte lane 3 (DQS3) DQ[24:31]
	 *   indices [24:31] - byte lane 2 (DQS2) DQ[16:23]
	 */
	sch = &swizzle_cfg->phys[LP4_PHYS_CH0B];
	memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz);
	memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz);
	memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz);
	memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz);

	/*
	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
	 */
	sch = &swizzle_cfg->phys[LP4_PHYS_CH0A];
	memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz);
	memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz);
	memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz);
	memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz);

	sch = &swizzle_cfg->phys[LP4_PHYS_CH1B];
	memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz);
	memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz);
	memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz);
	memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz);

	/*
	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
	 */
	sch = &swizzle_cfg->phys[LP4_PHYS_CH1A];
	memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz);
	memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz);
	memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz);
	memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz);
}

int fspm_update_config(struct udevice *dev, struct fspm_upd *upd)
{
	struct fsp_m_config *cfg = &upd->config;
	struct fspm_arch_upd *arch = &upd->arch;

	arch->nvs_buffer_ptr = NULL;
	prepare_mrc_cache(upd);
	arch->stack_base = (void *)0xfef96000;
	arch->boot_loader_tolum_size = 0;

	arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION;
	cfg->serial_debug_port_type = 2;
	cfg->serial_debug_port_device = 2;
	cfg->serial_debug_port_stride_size = 2;
	cfg->serial_debug_port_address = 0;

	cfg->package = 1;
	/* Don't enforce a memory size limit */
	cfg->memory_size_limit = 0;
	cfg->low_memory_max_value = 2048;  /* 2 GB */
	/* No restrictions on memory above 4GiB */
	cfg->high_memory_max_value = 0;

	/* Always default to attempt to use saved training data */
	cfg->disable_fast_boot = 0;

	const u8 *swizzle_data;

	swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle",
					     LP4_NUM_BYTE_LANES *
					     DQ_BITS_PER_DQS *
					     LP4_NUM_PHYS_CHANNELS);
	if (!swizzle_data)
		return log_msg_ret("Cannot read swizzel data", -EINVAL);

	setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data);

	cfg->pre_mem_gpio_table_ptr = 0;

	cfg->profile = 0xb;
	cfg->msg_level_mask = 0;

	/* other */
	cfg->skip_cse_rbp = 1;
	cfg->periodic_retraining_disable = 0;
	cfg->enable_s3_heci2 = 0;

	return 0;
}

/*
 * The FSP-M binary appears to break the SPI controller. It can be fixed by
 * writing the BAR again, so do that here
 */
int fspm_done(struct udevice *dev)
{
	struct udevice *spi;
	int ret;

	/* Don't probe the device, since that reads the BAR */
	ret = uclass_find_first_device(UCLASS_SPI, &spi);
	if (ret)
		return log_msg_ret("SPI", ret);
	if (!spi)
		return log_msg_ret("no SPI", -ENODEV);

	dm_pci_write_config32(spi, PCI_BASE_ADDRESS_0,
			      IOMAP_SPI_BASE | PCI_BASE_ADDRESS_SPACE_MEMORY);

	return 0;
}