u-boot/drivers/net/rtl8139.c

780 lines
22 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* rtl8139.c : U-Boot driver for the RealTek RTL8139
*
* Masami Komiya (mkomiya@sonare.it)
*
* Most part is taken from rtl8139.c of etherboot
*
*/
/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
*
* ported from the linux driver written by Donald Becker
* by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
*
* changes to the original driver:
* - removed support for interrupts, switching to polling mode (yuck!)
* - removed support for the 8129 chip (external MII)
*/
/*********************************************************************/
/* Revision History */
/*********************************************************************/
/*
* 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
* Put in virt_to_bus calls to allow Etherboot relocation.
*
* 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
* Following email from Hyun-Joon Cha, added a disable routine, otherwise
* NIC remains live and can crash the kernel later.
*
* 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
* Shuffled things around, removed the leftovers from the 8129 support
* that was in the Linux driver and added a bit more 8139 definitions.
* Moved the 8K receive buffer to a fixed, available address outside the
* 0x98000-0x9ffff range. This is a bit of a hack, but currently the only
* way to make room for the Etherboot features that need substantial amounts
* of code like the ANSI console support. Currently the buffer is just below
* 0x10000, so this even conforms to the tagged boot image specification,
* which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
* interpretation of this "reserved" is that Etherboot may do whatever it
* likes, as long as its environment is kept intact (like the BIOS
* variables). Hopefully fixed rtl8139_recv() once and for all. The symptoms
* were that if Etherboot was left at the boot menu for several minutes, the
* first eth_poll failed. Seems like I am the only person who does this.
* First of all I fixed the debugging code and then set out for a long bug
* hunting session. It took me about a week full time work - poking around
* various places in the driver, reading Don Becker's and Jeff Garzik's Linux
* driver and even the FreeBSD driver (what a piece of crap!) - and
* eventually spotted the nasty thing: the transmit routine was acknowledging
* each and every interrupt pending, including the RxOverrun and RxFIFIOver
* interrupts. This confused the RTL8139 thoroughly. It destroyed the
* Rx ring contents by dumping the 2K FIFO contents right where we wanted to
* get the next packet. Oh well, what fun.
*
* 18 Jan 2000 mdc@thinguin.org (Marty Connor)
* Drastically simplified error handling. Basically, if any error
* in transmission or reception occurs, the card is reset.
* Also, pointed all transmit descriptors to the same buffer to
* save buffer space. This should decrease driver size and avoid
* corruption because of exceeding 32K during runtime.
*
* 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
* rtl8139_recv was quite broken: it used the RxOK interrupt flag instead
* of the RxBufferEmpty flag which often resulted in very bad
* transmission performace - below 1kBytes/s.
*
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <log.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <pci.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/types.h>
#define RTL_TIMEOUT 100000
/* PCI Tuning Parameters */
/* Threshold is bytes transferred to chip before transmission starts. */
#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
#define DEBUG_TX 0 /* set to 1 to enable debug code */
#define DEBUG_RX 0 /* set to 1 to enable debug code */
#ifdef CONFIG_DM_ETH
#define bus_to_phys(devno, a) dm_pci_mem_to_phys((devno), (a))
#define phys_to_bus(devno, a) dm_pci_phys_to_mem((devno), (a))
#else
#define bus_to_phys(devno, a) pci_mem_to_phys((pci_dev_t)(devno), (a))
#define phys_to_bus(devno, a) pci_phys_to_mem((pci_dev_t)(devno), (a))
#endif
/* Symbolic offsets to registers. */
/* Ethernet hardware address. */
#define RTL_REG_MAC0 0x00
/* Multicast filter. */
#define RTL_REG_MAR0 0x08
/* Transmit status (four 32bit registers). */
#define RTL_REG_TXSTATUS0 0x10
/* Tx descriptors (also four 32bit). */
#define RTL_REG_TXADDR0 0x20
#define RTL_REG_RXBUF 0x30
#define RTL_REG_RXEARLYCNT 0x34
#define RTL_REG_RXEARLYSTATUS 0x36
#define RTL_REG_CHIPCMD 0x37
#define RTL_REG_CHIPCMD_CMDRESET BIT(4)
#define RTL_REG_CHIPCMD_CMDRXENB BIT(3)
#define RTL_REG_CHIPCMD_CMDTXENB BIT(2)
#define RTL_REG_CHIPCMD_RXBUFEMPTY BIT(0)
#define RTL_REG_RXBUFPTR 0x38
#define RTL_REG_RXBUFADDR 0x3A
#define RTL_REG_INTRMASK 0x3C
#define RTL_REG_INTRSTATUS 0x3E
#define RTL_REG_INTRSTATUS_PCIERR BIT(15)
#define RTL_REG_INTRSTATUS_PCSTIMEOUT BIT(14)
#define RTL_REG_INTRSTATUS_CABLELENCHANGE BIT(13)
#define RTL_REG_INTRSTATUS_RXFIFOOVER BIT(6)
#define RTL_REG_INTRSTATUS_RXUNDERRUN BIT(5)
#define RTL_REG_INTRSTATUS_RXOVERFLOW BIT(4)
#define RTL_REG_INTRSTATUS_TXERR BIT(3)
#define RTL_REG_INTRSTATUS_TXOK BIT(2)
#define RTL_REG_INTRSTATUS_RXERR BIT(1)
#define RTL_REG_INTRSTATUS_RXOK BIT(0)
#define RTL_REG_TXCONFIG 0x40
#define RTL_REG_RXCONFIG 0x44
#define RTL_REG_RXCONFIG_RXCFGWRAP BIT(7)
#define RTL_REG_RXCONFIG_ACCEPTERR BIT(5)
#define RTL_REG_RXCONFIG_ACCEPTRUNT BIT(4)
#define RTL_REG_RXCONFIG_ACCEPTBROADCAST BIT(3)
#define RTL_REG_RXCONFIG_ACCEPTMULTICAST BIT(2)
#define RTL_REG_RXCONFIG_ACCEPTMYPHYS BIT(1)
#define RTL_REG_RXCONFIG_ACCEPTALLPHYS BIT(0)
/* general-purpose counter. */
#define RTL_REG_TIMER 0x48
/* 24 bits valid, write clears. */
#define RTL_REG_RXMISSED 0x4C
#define RTL_REG_CFG9346 0x50
#define RTL_REG_CONFIG0 0x51
#define RTL_REG_CONFIG1 0x52
/* intr if gp counter reaches this value */
#define RTL_REG_TIMERINTRREG 0x54
#define RTL_REG_MEDIASTATUS 0x58
#define RTL_REG_MEDIASTATUS_MSRTXFLOWENABLE BIT(7)
#define RTL_REG_MEDIASTATUS_MSRRXFLOWENABLE BIT(6)
#define RTL_REG_MEDIASTATUS_MSRSPEED10 BIT(3)
#define RTL_REG_MEDIASTATUS_MSRLINKFAIL BIT(2)
#define RTL_REG_MEDIASTATUS_MSRRXPAUSEFLAG BIT(1)
#define RTL_REG_MEDIASTATUS_MSRTXPAUSEFLAG BIT(0)
#define RTL_REG_CONFIG3 0x59
#define RTL_REG_MULTIINTR 0x5C
/* revision of the RTL8139 chip */
#define RTL_REG_REVISIONID 0x5E
#define RTL_REG_TXSUMMARY 0x60
#define RTL_REG_MII_BMCR 0x62
#define RTL_REG_MII_BMSR 0x64
#define RTL_REG_NWAYADVERT 0x66
#define RTL_REG_NWAYLPAR 0x68
#define RTL_REG_NWAYEXPANSION 0x6A
#define RTL_REG_DISCONNECTCNT 0x6C
#define RTL_REG_FALSECARRIERCNT 0x6E
#define RTL_REG_NWAYTESTREG 0x70
/* packet received counter */
#define RTL_REG_RXCNT 0x72
/* chip status and configuration register */
#define RTL_REG_CSCR 0x74
#define RTL_REG_PHYPARM1 0x78
#define RTL_REG_TWISTERPARM 0x7c
/* undocumented */
#define RTL_REG_PHYPARM2 0x80
/*
* from 0x84 onwards are a number of power management/wakeup frame
* definitions we will probably never need to know about.
*/
#define RTL_STS_RXMULTICAST BIT(15)
#define RTL_STS_RXPHYSICAL BIT(14)
#define RTL_STS_RXBROADCAST BIT(13)
#define RTL_STS_RXBADSYMBOL BIT(5)
#define RTL_STS_RXRUNT BIT(4)
#define RTL_STS_RXTOOLONG BIT(3)
#define RTL_STS_RXCRCERR BIT(2)
#define RTL_STS_RXBADALIGN BIT(1)
#define RTL_STS_RXSTATUSOK BIT(0)
struct rtl8139_priv {
#ifndef CONFIG_DM_ETH
struct eth_device dev;
pci_dev_t devno;
#else
struct udevice *devno;
#endif
unsigned int rxstatus;
unsigned int cur_rx;
unsigned int cur_tx;
unsigned long ioaddr;
unsigned char enetaddr[6];
};
/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4);
static unsigned char rx_ring[RX_BUF_LEN + 16] __aligned(4);
/* Serial EEPROM section. */
/* EEPROM_Ctrl bits. */
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
#define EE_CS 0x08 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
#define EE_WRITE_0 0x00
#define EE_WRITE_1 0x02
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
#define EE_ENB (0x80 | EE_CS)
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD 5
#define EE_READ_CMD 6
#define EE_ERASE_CMD 7
static void rtl8139_eeprom_delay(struct rtl8139_priv *priv)
{
/*
* Delay between EEPROM clock transitions.
* No extra delay is needed with 33MHz PCI, but 66MHz may change this.
*/
inl(priv->ioaddr + RTL_REG_CFG9346);
}
static int rtl8139_read_eeprom(struct rtl8139_priv *priv,
unsigned int location, unsigned int addr_len)
{
unsigned int read_cmd = location | (EE_READ_CMD << addr_len);
uintptr_t ee_addr = priv->ioaddr + RTL_REG_CFG9346;
unsigned int retval = 0;
u8 dataval;
int i;
outb(EE_ENB & ~EE_CS, ee_addr);
outb(EE_ENB, ee_addr);
rtl8139_eeprom_delay(priv);
/* Shift the read command bits out. */
for (i = 4 + addr_len; i >= 0; i--) {
dataval = (read_cmd & BIT(i)) ? EE_DATA_WRITE : 0;
outb(EE_ENB | dataval, ee_addr);
rtl8139_eeprom_delay(priv);
outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
rtl8139_eeprom_delay(priv);
}
outb(EE_ENB, ee_addr);
rtl8139_eeprom_delay(priv);
for (i = 16; i > 0; i--) {
outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
rtl8139_eeprom_delay(priv);
retval <<= 1;
retval |= inb(ee_addr) & EE_DATA_READ;
outb(EE_ENB, ee_addr);
rtl8139_eeprom_delay(priv);
}
/* Terminate the EEPROM access. */
outb(~EE_CS, ee_addr);
rtl8139_eeprom_delay(priv);
return retval;
}
static const unsigned int rtl8139_rx_config =
(RX_BUF_LEN_IDX << 11) |
(RX_FIFO_THRESH << 13) |
(RX_DMA_BURST << 8);
static void rtl8139_set_rx_mode(struct rtl8139_priv *priv)
{
/* !IFF_PROMISC */
unsigned int rx_mode = RTL_REG_RXCONFIG_ACCEPTBROADCAST |
RTL_REG_RXCONFIG_ACCEPTMULTICAST |
RTL_REG_RXCONFIG_ACCEPTMYPHYS;
outl(rtl8139_rx_config | rx_mode, priv->ioaddr + RTL_REG_RXCONFIG);
outl(0xffffffff, priv->ioaddr + RTL_REG_MAR0 + 0);
outl(0xffffffff, priv->ioaddr + RTL_REG_MAR0 + 4);
}
static void rtl8139_hw_reset(struct rtl8139_priv *priv)
{
u8 reg;
int i;
outb(RTL_REG_CHIPCMD_CMDRESET, priv->ioaddr + RTL_REG_CHIPCMD);
/* Give the chip 10ms to finish the reset. */
for (i = 0; i < 100; i++) {
reg = inb(priv->ioaddr + RTL_REG_CHIPCMD);
if (!(reg & RTL_REG_CHIPCMD_CMDRESET))
break;
udelay(100);
}
}
static void rtl8139_reset(struct rtl8139_priv *priv)
{
int i;
priv->cur_rx = 0;
priv->cur_tx = 0;
rtl8139_hw_reset(priv);
for (i = 0; i < ETH_ALEN; i++)
outb(priv->enetaddr[i], priv->ioaddr + RTL_REG_MAC0 + i);
/* Must enable Tx/Rx before setting transfer thresholds! */
outb(RTL_REG_CHIPCMD_CMDRXENB | RTL_REG_CHIPCMD_CMDTXENB,
priv->ioaddr + RTL_REG_CHIPCMD);
/* accept no frames yet! */
outl(rtl8139_rx_config, priv->ioaddr + RTL_REG_RXCONFIG);
outl((TX_DMA_BURST << 8) | 0x03000000, priv->ioaddr + RTL_REG_TXCONFIG);
/*
* The Linux driver changes RTL_REG_CONFIG1 here to use a different
* LED pattern for half duplex or full/autodetect duplex (for
* full/autodetect, the outputs are TX/RX, Link10/100, FULL, while
* for half duplex it uses TX/RX, Link100, Link10). This is messy,
* because it doesn't match the inscription on the mounting bracket.
* It should not be changed from the configuration EEPROM default,
* because the card manufacturer should have set that to match the
* card.
*/
debug_cond(DEBUG_RX, "rx ring address is %p\n", rx_ring);
flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
outl(phys_to_bus(priv->devno, (int)rx_ring), priv->ioaddr + RTL_REG_RXBUF);
/*
* If we add multicast support, the RTL_REG_MAR0 register would have
* to be initialized to 0xffffffffffffffff (two 32 bit accesses).
* Etherboot only needs broadcast (for ARP/RARP/BOOTP/DHCP) and
* unicast.
*/
outb(RTL_REG_CHIPCMD_CMDRXENB | RTL_REG_CHIPCMD_CMDTXENB,
priv->ioaddr + RTL_REG_CHIPCMD);
outl(rtl8139_rx_config, priv->ioaddr + RTL_REG_RXCONFIG);
/* Start the chip's Tx and Rx process. */
outl(0, priv->ioaddr + RTL_REG_RXMISSED);
rtl8139_set_rx_mode(priv);
/* Disable all known interrupts by setting the interrupt mask. */
outw(0, priv->ioaddr + RTL_REG_INTRMASK);
}
static int rtl8139_send_common(struct rtl8139_priv *priv,
void *packet, int length)
{
unsigned int len = length;
unsigned long txstatus;
unsigned int status;
int i = 0;
memcpy(tx_buffer, packet, length);
debug_cond(DEBUG_TX, "sending %d bytes\n", len);
/*
* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
* bytes are sent automatically for the FCS, totalling to 64 bytes).
*/
while (len < ETH_ZLEN)
tx_buffer[len++] = '\0';
flush_cache((unsigned long)tx_buffer, length);
outl(phys_to_bus(priv->devno, (unsigned long)tx_buffer),
priv->ioaddr + RTL_REG_TXADDR0 + priv->cur_tx * 4);
outl(((TX_FIFO_THRESH << 11) & 0x003f0000) | len,
priv->ioaddr + RTL_REG_TXSTATUS0 + priv->cur_tx * 4);
do {
status = inw(priv->ioaddr + RTL_REG_INTRSTATUS);
/*
* Only acknlowledge interrupt sources we can properly
* handle here - the RTL_REG_INTRSTATUS_RXOVERFLOW/
* RTL_REG_INTRSTATUS_RXFIFOOVER MUST be handled in the
* rtl8139_recv() function.
*/
status &= RTL_REG_INTRSTATUS_TXOK | RTL_REG_INTRSTATUS_TXERR |
RTL_REG_INTRSTATUS_PCIERR;
outw(status, priv->ioaddr + RTL_REG_INTRSTATUS);
if (status)
break;
udelay(10);
} while (i++ < RTL_TIMEOUT);
txstatus = inl(priv->ioaddr + RTL_REG_TXSTATUS0 + priv->cur_tx * 4);
if (!(status & RTL_REG_INTRSTATUS_TXOK)) {
debug_cond(DEBUG_TX,
"tx timeout/error (%d usecs), status %hX txstatus %lX\n",
10 * i, status, txstatus);
rtl8139_reset(priv);
return 0;
}
priv->cur_tx = (priv->cur_tx + 1) % NUM_TX_DESC;
debug_cond(DEBUG_TX, "tx done, status %hX txstatus %lX\n",
status, txstatus);
return length;
}
static int rtl8139_recv_common(struct rtl8139_priv *priv, unsigned char *rxdata,
uchar **packetp)
{
const unsigned int rxstat = RTL_REG_INTRSTATUS_RXFIFOOVER |
RTL_REG_INTRSTATUS_RXOVERFLOW |
RTL_REG_INTRSTATUS_RXOK;
unsigned int rx_size, rx_status;
unsigned int ring_offs;
int length = 0;
if (inb(priv->ioaddr + RTL_REG_CHIPCMD) & RTL_REG_CHIPCMD_RXBUFEMPTY)
return 0;
priv->rxstatus = inw(priv->ioaddr + RTL_REG_INTRSTATUS);
/* See below for the rest of the interrupt acknowledges. */
outw(priv->rxstatus & ~rxstat, priv->ioaddr + RTL_REG_INTRSTATUS);
debug_cond(DEBUG_RX, "%s: int %hX ", __func__, priv->rxstatus);
ring_offs = priv->cur_rx % RX_BUF_LEN;
/* ring_offs is guaranteed being 4-byte aligned */
rx_status = le32_to_cpu(*(unsigned int *)(rx_ring + ring_offs));
rx_size = rx_status >> 16;
rx_status &= 0xffff;
if ((rx_status & (RTL_STS_RXBADSYMBOL | RTL_STS_RXRUNT |
RTL_STS_RXTOOLONG | RTL_STS_RXCRCERR |
RTL_STS_RXBADALIGN)) ||
(rx_size < ETH_ZLEN) ||
(rx_size > ETH_FRAME_LEN + 4)) {
printf("rx error %hX\n", rx_status);
/* this clears all interrupts still pending */
rtl8139_reset(priv);
return 0;
}
/* Received a good packet */
length = rx_size - 4; /* no one cares about the FCS */
if (ring_offs + 4 + rx_size - 4 > RX_BUF_LEN) {
int semi_count = RX_BUF_LEN - ring_offs - 4;
memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
memcpy(&rxdata[semi_count], rx_ring,
rx_size - 4 - semi_count);
*packetp = rxdata;
debug_cond(DEBUG_RX, "rx packet %d+%d bytes",
semi_count, rx_size - 4 - semi_count);
} else {
*packetp = rx_ring + ring_offs + 4;
debug_cond(DEBUG_RX, "rx packet %d bytes", rx_size - 4);
}
return length;
}
static int rtl8139_free_pkt_common(struct rtl8139_priv *priv, unsigned int len)
{
const unsigned int rxstat = RTL_REG_INTRSTATUS_RXFIFOOVER |
RTL_REG_INTRSTATUS_RXOVERFLOW |
RTL_REG_INTRSTATUS_RXOK;
unsigned int rx_size = len + 4;
flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
priv->cur_rx = ROUND(priv->cur_rx + rx_size + 4, 4);
outw(priv->cur_rx - 16, priv->ioaddr + RTL_REG_RXBUFPTR);
/*
* See RTL8139 Programming Guide V0.1 for the official handling of
* Rx overflow situations. The document itself contains basically
* no usable information, except for a few exception handling rules.
*/
outw(priv->rxstatus & rxstat, priv->ioaddr + RTL_REG_INTRSTATUS);
return 0;
}
static int rtl8139_init_common(struct rtl8139_priv *priv)
{
u8 reg;
/* Bring the chip out of low-power mode. */
outb(0x00, priv->ioaddr + RTL_REG_CONFIG1);
rtl8139_reset(priv);
reg = inb(priv->ioaddr + RTL_REG_MEDIASTATUS);
if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) {
printf("Cable not connected or other link failure\n");
return -1;
}
return 0;
}
static void rtl8139_stop_common(struct rtl8139_priv *priv)
{
rtl8139_hw_reset(priv);
}
static void rtl8139_get_hwaddr(struct rtl8139_priv *priv)
{
unsigned short *ap = (unsigned short *)priv->enetaddr;
int i, addr_len;
/* Bring the chip out of low-power mode. */
outb(0x00, priv->ioaddr + RTL_REG_CONFIG1);
addr_len = rtl8139_read_eeprom(priv, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
*ap++ = le16_to_cpu(rtl8139_read_eeprom(priv, i + 7, addr_len));
}
static void rtl8139_name(char *str, int card_number)
{
sprintf(str, "RTL8139#%u", card_number);
}
static struct pci_device_id supported[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139) },
{ }
};
#ifndef CONFIG_DM_ETH
static int rtl8139_bcast_addr(struct eth_device *dev, const u8 *bcast_mac,
int join)
{
return 0;
}
static int rtl8139_init(struct eth_device *dev, struct bd_info *bis)
{
struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
return rtl8139_init_common(priv);
}
static void rtl8139_stop(struct eth_device *dev)
{
struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
return rtl8139_stop_common(priv);
}
static int rtl8139_send(struct eth_device *dev, void *packet, int length)
{
struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
return rtl8139_send_common(priv, packet, length);
}
static int rtl8139_recv(struct eth_device *dev)
{
struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
unsigned char rxdata[RX_BUF_LEN];
uchar *packet;
int ret;
ret = rtl8139_recv_common(priv, rxdata, &packet);
if (ret) {
net_process_received_packet(packet, ret);
rtl8139_free_pkt_common(priv, ret);
}
return ret;
}
int rtl8139_initialize(struct bd_info *bis)
{
struct rtl8139_priv *priv;
struct eth_device *dev;
int card_number = 0;
pci_dev_t devno;
int idx = 0;
u32 iobase;
while (1) {
/* Find RTL8139 */
devno = pci_find_devices(supported, idx++);
if (devno < 0)
break;
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
iobase &= ~0xf;
debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
priv = calloc(1, sizeof(*priv));
if (!priv) {
printf("Can not allocate memory of rtl8139\n");
break;
}
priv->devno = devno;
priv->ioaddr = (unsigned long)bus_to_phys(devno, iobase);
dev = &priv->dev;
rtl8139_name(dev->name, card_number);
dev->iobase = priv->ioaddr; /* Non-DM compatibility */
dev->init = rtl8139_init;
dev->halt = rtl8139_stop;
dev->send = rtl8139_send;
dev->recv = rtl8139_recv;
dev->mcast = rtl8139_bcast_addr;
rtl8139_get_hwaddr(priv);
/* Non-DM compatibility */
memcpy(priv->dev.enetaddr, priv->enetaddr, 6);
eth_register(dev);
card_number++;
pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
udelay(10 * 1000);
}
return card_number;
}
#else /* DM_ETH */
static int rtl8139_start(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct rtl8139_priv *priv = dev_get_priv(dev);
memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
return rtl8139_init_common(priv);
}
static void rtl8139_stop(struct udevice *dev)
{
struct rtl8139_priv *priv = dev_get_priv(dev);
rtl8139_stop_common(priv);
}
static int rtl8139_send(struct udevice *dev, void *packet, int length)
{
struct rtl8139_priv *priv = dev_get_priv(dev);
int ret;
ret = rtl8139_send_common(priv, packet, length);
return ret ? 0 : -ETIMEDOUT;
}
static int rtl8139_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct rtl8139_priv *priv = dev_get_priv(dev);
static unsigned char rxdata[RX_BUF_LEN];
return rtl8139_recv_common(priv, rxdata, packetp);
}
static int rtl8139_free_pkt(struct udevice *dev, uchar *packet, int length)
{
struct rtl8139_priv *priv = dev_get_priv(dev);
rtl8139_free_pkt_common(priv, length);
return 0;
}
static int rtl8139_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct rtl8139_priv *priv = dev_get_priv(dev);
memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
rtl8139_reset(priv);
return 0;
}
static int rtl8139_read_rom_hwaddr(struct udevice *dev)
{
struct rtl8139_priv *priv = dev_get_priv(dev);
rtl8139_get_hwaddr(priv);
return 0;
}
static int rtl8139_bind(struct udevice *dev)
{
static int card_number;
char name[16];
rtl8139_name(name, card_number++);
return device_set_name(dev, name);
}
static int rtl8139_probe(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
struct rtl8139_priv *priv = dev_get_priv(dev);
u32 iobase;
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_1, &iobase);
iobase &= ~0xf;
debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
priv->devno = dev;
priv->ioaddr = (unsigned long)bus_to_phys(dev, iobase);
rtl8139_get_hwaddr(priv);
memcpy(plat->enetaddr, priv->enetaddr, sizeof(priv->enetaddr));
dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20);
return 0;
}
static const struct eth_ops rtl8139_ops = {
.start = rtl8139_start,
.send = rtl8139_send,
.recv = rtl8139_recv,
.stop = rtl8139_stop,
.free_pkt = rtl8139_free_pkt,
.write_hwaddr = rtl8139_write_hwaddr,
.read_rom_hwaddr = rtl8139_read_rom_hwaddr,
};
U_BOOT_DRIVER(eth_rtl8139) = {
.name = "eth_rtl8139",
.id = UCLASS_ETH,
.bind = rtl8139_bind,
.probe = rtl8139_probe,
.ops = &rtl8139_ops,
.priv_auto_alloc_size = sizeof(struct rtl8139_priv),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};
U_BOOT_PCI_DEVICE(eth_rtl8139, supported);
#endif