u-boot/drivers/net/fsl-mc/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# Copyright 2014 Freescale Semiconductor, Inc.
# Copyright 2018 NXP

# Layerscape MC driver
obj-y += mc.o \
	mc_sys.o \
	dpmng.o	\
	dprc.o	\
	dpbp.o	\
	dpni.o	\
	dpmac.o	\
	dpsparser.o
obj-y += dpio/
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
armv8/fsl-lsch3: Add support to load and start MC Firmware Adding support to load and start the Layerscape Management Complex (MC) firmware. First, the MC GCR register is set to 0 to reset all cores. MC firmware and DPL images are copied from their location in NOR flash to DDR. MC registers are updated with the location of these images. Deasserting the reset bit of MC GCR register releases core 0 to run. Core 1 will be released by MC firmware. Stop bits are not touched for this step. U-boot waits for MC until it boots up. In case of a failure, device tree is updated accordingly. The MC firmware image uses FIT format. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> 2014-06-23 22:15:55 +00:00			`#`
			`# Copyright 2014 Freescale Semiconductor, Inc.`
drivers/fsl-mc: Support DPSPARSER object and apply spb command Add support for DPSPARSER object (create/destroy, open/close, apply spb) which is required to configure Soft Parser by using MC. Also add uboot command to apply Soft Parser Blob with command: fsl_mc apply spb <spb_load_addr> Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> 2019-11-19 10:28:17 +00:00			`# Copyright 2018 NXP`
armv8/fsl-lsch3: Add support to load and start MC Firmware Adding support to load and start the Layerscape Management Complex (MC) firmware. First, the MC GCR register is set to 0 to reset all cores. MC firmware and DPL images are copied from their location in NOR flash to DDR. MC registers are updated with the location of these images. Deasserting the reset bit of MC GCR register releases core 0 to run. Core 1 will be released by MC firmware. Stop bits are not touched for this step. U-boot waits for MC until it boots up. In case of a failure, device tree is updated accordingly. The MC firmware image uses FIT format. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> 2014-06-23 22:15:55 +00:00
			`# Layerscape MC driver`
drivers/mc: Migrated MC Flibs to 0.5.2 Upgrade Manage Complex (MC) flib API to 0.5.2. Rename directory fsl_mc to fsl-mc. Change the fsl-mc node in Linux device tree from "fsl,dprcr" to "fsl-mc". Print MC version info when appropriate. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2015-01-06 21:19:02 +00:00			`obj-y += mc.o \`
			`mc_sys.o \`
driver/fsl-mc: Add support of MC Flibs Freescale's Layerscape Management Complex (MC) provide support various objects like DPRC, DPNI, DPBP and DPIO. Where: DPRC: Place holdes for other MC objectes like DPNI, DPBP, DPIO DPBP: Management of buffer pool DPIO: Used for used to QBMan portal DPNI: Represents standard network interface These objects are used for DPAA ethernet drivers. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Signed-off-by: pankaj chauhan <pankaj.chauhan@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2015-03-19 16:20:45 +00:00			`dpmng.o \`
			`dprc.o \`
			`dpbp.o \`
driver: net: fsl-mc: Add APIs for DPMAC objects in FLIB DPMAC object of Management complex controls Physical MAC and MDIO controller. It provides APIs for MDIO and link state updates. It also provides APIs for PHY/link configuration. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2015-11-04 06:55:54 +00:00			`dpni.o \`
drivers/fsl-mc: Support DPSPARSER object and apply spb command Add support for DPSPARSER object (create/destroy, open/close, apply spb) which is required to configure Soft Parser by using MC. Also add uboot command to apply Soft Parser Blob with command: fsl_mc apply spb <spb_load_addr> Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> 2019-11-19 10:28:17 +00:00			`dpmac.o \`
			`dpsparser.o`
driver/fsl-mc: Add support of MC Flibs Freescale's Layerscape Management Complex (MC) provide support various objects like DPRC, DPNI, DPBP and DPIO. Where: DPRC: Place holdes for other MC objectes like DPNI, DPBP, DPIO DPBP: Management of buffer pool DPIO: Used for used to QBMan portal DPNI: Represents standard network interface These objects are used for DPAA ethernet drivers. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Signed-off-by: pankaj chauhan <pankaj.chauhan@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2015-03-19 16:20:45 +00:00			`obj-y += dpio/`