16 KiB
Contributing to Clippy
Hello fellow Rustacean! Great to see your interest in compiler internals and lints!
First: if you're unsure or afraid of anything, just ask or submit the issue or pull request anyway. You won't be yelled at for giving it your best effort. The worst that can happen is that you'll be politely asked to change something. We appreciate any sort of contributions, and don't want a wall of rules to get in the way of that.
Clippy welcomes contributions from everyone. There are many ways to contribute to Clippy and the following document
explains how you can contribute and how to get started. If you have any questions about contributing or need help with
anything, feel free to ask questions on issues or visit the #clippy on Zulip.
All contributors are expected to follow the Rust Code of Conduct.
Getting started
Note: If this is your first time contributing to Clippy, you should first read the Basics docs.
High level approach
- Find something to fix/improve
- Change code (likely some file in
clippy_lints/src/) - Follow the instructions in the Basics docs to get set up
- Run
cargo testin the root directory and wiggle code until it passes - Open a PR (also can be done after 2. if you run into problems)
Finding something to fix/improve
All issues on Clippy are mentored, if you want help with a bug just ask @Manishearth, @flip1995, @phansch or @yaahc.
Some issues are easier than others. The good first issue label can be used to find the easy issues.
If you want to work on an issue, please leave a comment so that we can assign it to you!
There are also some abandoned PRs, marked with S-inactive-closed.
Pretty often these PRs are nearly completed and just need some extra steps
(formatting, addressing review comments, ...) to be merged. If you want to
complete such a PR, please leave a comment in the PR and open a new one based
on it.
Issues marked T-AST involve simple matching of the syntax tree structure,
and are generally easier than T-middle issues, which involve types
and resolved paths.
T-AST issues will generally need you to match against a predefined syntax structure.
To figure out how this syntax structure is encoded in the AST, it is recommended to run
rustc -Z ast-json on an example of the structure and compare with the nodes in the AST docs.
Usually the lint will end up to be a nested series of matches and ifs, like so.
But we can make it nest-less by using if_chain macro, like this.
E-medium issues are generally pretty easy too, though it's recommended you work on an E-easy issue first.
They are mostly classified as E-medium, since they might be somewhat involved code wise,
but not difficult per-se.
T-middle issues can be more involved and require verifying types. The ty module contains a
lot of methods that are useful, though one of the most useful would be expr_ty (gives the type of
an AST expression). match_def_path() in Clippy's utils module can also be useful.
Writing code
Have a look at the docs for writing lints for more details.
If you want to add a new lint or change existing ones apart from bugfixing, it's also a good idea to give the stability guarantees and lint categories sections of the Clippy 1.0 RFC a quick read.
Getting code-completion for rustc internals to work
Unfortunately, rust-analyzer does not (yet?) understand how Clippy uses compiler-internals
using extern crate and it also needs to be able to read the source files of the rustc-compiler which are not
available via a rustup component at the time of writing.
To work around this, you need to have a copy of the rustc-repo available which can be obtained via
git clone https://github.com/rust-lang/rust/.
Then you can run a cargo dev command to automatically make Clippy use the rustc-repo via path-dependencies
which rust-analyzer will be able to understand.
Run cargo dev ra-setup --repo-path <repo-path> where <repo-path> is an absolute path to the rustc repo
you just cloned.
The command will add path-dependencies pointing towards rustc-crates inside the rustc repo to
Clippys Cargo.tomls and should allow rust-analyzer to understand most of the types that Clippy uses.
Just make sure to remove the dependencies again before finally making a pull request!
How Clippy works
clippy_lints/src/lib.rs imports all the different lint modules and registers in the LintStore.
For example, the else_if_without_else lint is registered like this:
// ./clippy_lints/src/lib.rs
// ...
pub mod else_if_without_else;
// ...
pub fn register_plugins(store: &mut rustc_lint::LintStore, sess: &Session, conf: &Conf) {
// ...
store.register_early_pass(|| box else_if_without_else::ElseIfWithoutElse);
// ...
store.register_group(true, "clippy::restriction", Some("clippy_restriction"), vec![
// ...
LintId::of(&else_if_without_else::ELSE_IF_WITHOUT_ELSE),
// ...
]);
}
The rustc_lint::LintStore provides two methods to register lints:
register_early_pass and register_late_pass. Both take an object
that implements an EarlyLintPass or LateLintPass respectively. This is done in
every single lint. It's worth noting that the majority of clippy_lints/src/lib.rs is autogenerated by cargo dev update_lints. When you are writing your own lint, you can use that script to save you some time.
// ./clippy_lints/src/else_if_without_else.rs
use rustc_lint::{EarlyLintPass, EarlyContext};
// ...
pub struct ElseIfWithoutElse;
// ...
impl EarlyLintPass for ElseIfWithoutElse {
// ... the functions needed, to make the lint work
}
The difference between EarlyLintPass and LateLintPass is that the methods of the EarlyLintPass trait only provide
AST information. The methods of the LateLintPass trait are executed after type checking and contain type information
via the LateContext parameter.
That's why the else_if_without_else example uses the register_early_pass function. Because the
actual lint logic does not depend on any type information.
Fixing build failures caused by Rust
Clippy currently gets built with rustc of the rust-lang/rust master
branch. Most of the times we have to adapt to the changes and only very rarely
there's an actual bug in Rust.
If you decide to make Clippy work again with a Rust commit that breaks it, you
have to sync the rust-lang/rust-clippy repository with the subtree copy of
Clippy in the rust-lang/rust repository.
For general information about subtrees in the Rust repository see Rust's
CONTRIBUTING.md.
Patching git-subtree to work with big repos
Currently there's a bug in git-subtree that prevents it from working properly
with the rust-lang/rust repo. There's an open PR to fix that, but it's stale.
Before continuing with the following steps, we need to manually apply that fix to
our local copy of git-subtree.
You can get the patched version of git-subtree from here.
Put this file under /usr/lib/git-core (taking a backup of the previous file)
and make sure it has the proper permissions:
sudo cp --backup /path/to/patched/git-subtree.sh /usr/lib/git-core/git-subtree
sudo chmod --reference=/usr/lib/git-core/git-subtree~ /usr/lib/git-core/git-subtree
sudo chown --reference=/usr/lib/git-core/git-subtree~ /usr/lib/git-core/git-subtree
Note: The first time running git subtree push a cache has to be built. This
involves going through the complete Clippy history once. For this you have to
increase the stack limit though, which you can do with ulimit -s 60000.
Make sure to run the ulimit command from the same session you call git subtree.
Note: If you are a Debian user, dash is the shell used by default for scripts instead of sh.
This shell has a hardcoded recursion limit set to 1000. In order to make this process work,
you need to force the script to run bash instead. You can do this by editing the first
line of the git-subtree script and changing sh to bash.
Performing the sync
Here is a TL;DR version of the sync process (all of the following commands have
to be run inside the rust directory):
-
Clone the
rust-lang/rustrepository -
Sync the changes to the rust-copy of Clippy to your Clippy fork:
# Make sure to change `your-github-name` to your github name in the following command git subtree push -P src/tools/clippy git@github.com:your-github-name/rust-clippy sync-from-rustNote: This will directly push to the remote repository. You can also push to your local copy by replacing the remote address with
/path/to/rust-clippydirectory.Note: Most of the time you have to create a merge commit in the
rust-clippyrepo (this has to be done in the Clippy repo, not in the rust-copy of Clippy):git fetch origin && git fetch upstream git checkout sync-from-rust git merge upstream/master -
Open a PR to
rust-lang/rust-clippyand wait for it to get merged (to accelerate the process ping the@rust-lang/clippyteam in your PR and/orannoyask them in the Zulip stream.)
Syncing back changes in Clippy to rust-lang/rust
To avoid flooding the rust-lang/rust PR queue, changes in Clippy's repo are synced back
in a bi-weekly basis if there's no urgent changes. This is done starting on the day of
the Rust stable release and then every other week. That way we guarantee that
every feature in Clippy is available for 2 weeks in nightly, before it can get to beta.
For reference, the first sync following this cadence was performed the 2020-08-27.
All of the following commands have to be run inside the rust directory.
-
Make sure Clippy itself is up-to-date by following the steps outlined in the previous section if necessary.
-
Sync the
rust-lang/rust-clippymaster to the rust-copy of Clippy:git checkout -b sync-from-clippy git subtree pull -P src/tools/clippy https://github.com/rust-lang/rust-clippy master -
Open a PR to
rust-lang/rust
Defining remotes
You may want to define remotes, so you don't have to type out the remote
addresses on every sync. You can do this with the following commands (these
commands still have to be run inside the rust directory):
# Set clippy-upstream remote for pulls
$ git remote add clippy-upstream https://github.com/rust-lang/rust-clippy
# Make sure to not push to the upstream repo
$ git remote set-url --push clippy-upstream DISABLED
# Set clippy-origin remote to your fork for pushes
$ git remote add clippy-origin git@github.com:your-github-name/rust-clippy
# Set a local remote
$ git remote add clippy-local /path/to/rust-clippy
You can then sync with the remote names from above, e.g.:
$ git subtree push -P src/tools/clippy clippy-local sync-from-rust
Issue and PR triage
Clippy is following the Rust triage procedure for issues and pull requests.
However, we are a smaller project with all contributors being volunteers currently. Between writing new lints, fixing issues, reviewing pull requests and responding to issues there may not always be enough time to stay on top of it all.
Our highest priority is fixing crashes and bugs. We don't want Clippy to crash on your code and we want it to be as reliable as the suggestions from Rust compiler errors.
Bors and Homu
We use a bot powered by Homu to help automate testing and landing of pull requests in Clippy. The bot's username is @bors.
You can find the Clippy bors queue here.
If you have @bors permissions, you can find an overview of the available commands here.
Contributions
Contributions to Clippy should be made in the form of GitHub pull requests. Each pull request will be reviewed by a core contributor (someone with permission to land patches) and either landed in the main tree or given feedback for changes that would be required.
All code in this repository is under the Apache-2.0 or the MIT license.