Enable ScalarReplacementOfAggregates in optimized builds
Like MatchBranchSimplification, this pass is known to produce significant runtime improvements in Cranelift artifacts, and I believe based on the perf runs here that the primary effect of this pass is to empower MatchBranchSimplification. ScalarReplacementOfAggregates on its own has little effect on anything, but when this was rebased up to include https://github.com/rust-lang/rust/pull/112001 we started seeing significant and majority-positive results.
Based on the fact that we see most of the regressions in debug builds (https://github.com/rust-lang/rust/pull/112002#issuecomment-1566270144) and some rather significant ones in cycles and wall time, I'm only enabling this in optimized builds at the moment.
Preserve substs in opaques recorded in typeck results
This means that we now prepopulate MIR with opaques with the right substs.
The first commit is a hack that I think we discussed, having to do with `DefiningAnchor::Bubble` basically being equivalent to `DefiningAnchor::Error` in the new solver, so having to use `DefiningAnchor::Bind` instead, lol.
r? `@lcnr`
rustdoc: add interaction delays for tooltip popovers
Preview:
* [notable traits](http://notriddle.com/rustdoc-demo-html-3/delay-tooltip/testing/struct.Vec.html#method.iter)
* [panicking code block](http://notriddle.com/rustdoc-demo-html-3/delay-tooltip/testing/struct.Vec.html#indexing)
Designing a good hover microinteraction is a matter of guessing user intent from what are, literally, vague gestures. In this case, guessing if hovering in our out of the tooltip base is intentional or not.
To figure this out, a few different techniques are used:
* When the mouse pointer enters a tooltip anchor point, its hitbox is grown on the bottom, where the popover is/will appear. This was already there before this commit: search "hover tunnel" in rustdoc.css for the implementation.
* This commit adds a delay when the mouse pointer enters the base anchor, in case the mouse pointer was just passing through and the user didn't want to open it.
* This commit also adds a delay when the mouse pointer exits the tooltip's base anchor or its popover, before hiding it.
* A fade-out animation is layered onto the pointer exit delay to immediately inform the user that they successfully dismissed the popover, while still providing a way for them to cancel it if it was a mistake and they still wanted to interact with it.
* No animation is used for revealing it, because we don't want people to try to interact with an element while it's in the middle of fading in: either they're allowed to interact with it while it's fading in, meaning it can't serve as mistake- proofing for opening the popover, or they can't, but they might try and be frustrated.
See also:
* https://www.nngroup.com/articles/timing-exposing-content/
* https://www.nngroup.com/articles/tooltip-guidelines/
* https://bjk5.com/post/44698559168/breaking-down-amazons-mega-dropdown
rustdoc: Fix LinkReplacer link matching
It currently just uses the first link with the same href which might not necessarily be the matching one.
This fixes replacements when there are several links to the same item but with different text (e.g. `[X] and [struct@X]`). It also fixes replacements in summaries since those use a links list with empty hrefs, so currently all links would always match the first link by href but then not match its text. This could also lead to a panic in the `original_lext[1..len() - 1]` part when the first link only has a single character, which is why the new code uses `.get(..)` instead.
Replace const eval limit by a lint and add an exponential backoff warning
The lint triggers at the first power of 2 that comes after 1 million function calls or traversed back-edges (takes less than a second on usual programs). After the first emission, an unsilenceable warning is repeated at every following power of 2 terminators, causing it to get reported less and less the longer the evaluation runs.
cc `@rust-lang/wg-const-eval`
fixes#93481closes#67217
Allow limited access to `OsStr` bytes
`OsStr` has historically kept its implementation details private out of
concern for locking us into a specific encoding on Windows.
This is an alternative to rust-lang#95290 which proposed specifying the encoding on Windows. Instead, this
only specifies that for cross-platform code, `OsStr`'s encoding is a superset of UTF-8 and defines
rules for safely interacting with it
At minimum, this can greatly simplify the `os_str_bytes` crate and every
arg parser that interacts with `OsStr` directly (which is most of those
that support invalid UTF-8).
Tracking issue: #111544
Optimize scalar and scalar pair representations loaded from ByRef in llvm
in https://github.com/rust-lang/rust/pull/105653 I noticed that we were generating suboptimal LLVM IR if we had a `ConstValue::ByRef` that could be represented by a `ScalarPair`. Before https://github.com/rust-lang/rust/pull/105653 this is probably rare, but after it, every slice will go down this suboptimal code path that requires LLVM to untangle a bunch of indirections and translate static allocations that are only used once to read a scalar pair from.
Make `TrustedStep` require `Copy`
All the implementations of the trait already are `Copy`, and this seems to be enough to simplify the implementations enough to make the MIR inliner willing to inline basics like `Range::next`.
r? `@thomcc`
Load only the crate header for `locator::crate_matches`
Previously, we used the following info to determine whether to load the crate:
1. The METADATA_HEADER, which includes a METADATA_VERSION constant
2. The embedded rustc version
3. Various metadata in the `CrateRoot`, including the SVH
This worked ok most of the time. Unfortunately, when building locally the rustc version is always
the same because `omit-git-hash` is on by default. That meant that we depended only on 1 and 3, and
we are not very good about bumping METADATA_VERSION (it's currently at 7) so in practice we were
only depending on 3. `CrateRoot` is a very large struct and changes somewhat regularly, so this led
to a steady stream of crashes from trying to load it.
Change the logic to add an intermediate step between 2 and 3: introduce a new `CrateHeader` struct
that contains only the minimum info needed to decide whether the crate should be loaded or not. That
avoids having to load all of `CrateRoot`, which in practice means we should crash much less often.
Note that this works because the SVH should be different between any two dependencies, even if the
compiler has changed, because we use `-Zbinary-dep-depinfo` in bootstrap. See
https://github.com/rust-lang/rust/pull/111329#issuecomment-1538303474 for more details about how the
original crash happened.
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Remove misleading target feature aliases
Fixes#100752. This is a follow up to #103750. These aliases could not be completely removed until rust-lang/stdarch#1355 landed.
cc `@Amanieu`
Stabilize const slice::split_at
This stabilizes the use of the following method in const context:
```rust
impl<T> [T] {
pub const fn split_at(&self, mid: usize) -> (&[T], &[T]);
}
```
cc tracking issue #101158
Implement `AsHandle`/`AsSocket` for `Arc`/`Rc`/`Box` on Windows
Implement the Windows counterpart to #97437 and #107317: Implement `AsHandle` and `AsSocket` for `Arc<T>`, `Rc<T>`, and `Box<T>`.
Add midpoint function for all integers and floating numbers
This pull-request adds the `midpoint` function to `{u,i}{8,16,32,64,128,size}`, `NonZeroU{8,16,32,64,size}` and `f{32,64}`.
This new function is analog to the [C++ midpoint](https://en.cppreference.com/w/cpp/numeric/midpoint) function, and basically compute `(a + b) / 2` with a rounding towards ~~`a`~~ negative infinity in the case of integers. Or simply said: `midpoint(a, b)` is `(a + b) >> 1` as if it were performed in a sufficiently-large signed integral type.
Note that unlike the C++ function this pull-request does not implement this function on pointers (`*const T` or `*mut T`). This could be implemented in a future pull-request if desire.
### Implementation
For `f32` and `f64` the implementation in based on the `libcxx` [one](18ab892ff7/libcxx/include/__numeric/midpoint.h (L65-L77)). I originally tried many different approach but all of them failed or lead me with a poor version of the `libcxx`. Note that `libstdc++` has a very similar one; Microsoft STL implementation is also basically the same as `libcxx`. It unfortunately doesn't seems like a better way exist.
For unsigned integers I created the macro `midpoint_impl!`, this macro has two branches:
- The first one take `$SelfT` and is used when there is no unsigned integer with at least the double of bits. The code simply use this formula `a + (b - a) / 2` with the arguments in the correct order and signs to have the good rounding.
- The second branch is used when a `$WideT` (at least double of bits as `$SelfT`) is provided, using a wider number means that no overflow can occur, this greatly improve the codegen (no branch and less instructions).
For signed integers the code basically forwards the signed numbers to the unsigned version of midpoint by mapping the signed numbers to their unsigned numbers (`ex: i8 [-128; 127] to [0; 255]`) and vice versa.
I originally created a version that worked directly on the signed numbers but the code was "ugly" and not understandable. Despite this mapping "overhead" the codegen is better than my most optimized version on signed integers.
~~Note that in the case of unsigned numbers I tried to be smart and used `#[cfg(target_pointer_width = "64")]` to determine if using the wide version was better or not by looking at the assembly on godbolt. This was applied to `u32`, `u64` and `usize` and doesn't change the behavior only the assembly code generated.~~
Use dynamic dispatch for queries
This replaces most concrete query values `V` with `MaybeUninit<[u8; { size_of::<V>() }]>` reducing the code instantiated by queries. The compile time of `rustc_query_impl` is reduced by 27%. It is an alternative to https://github.com/rust-lang/rust/pull/107937 which uses unstable const generics while this uses a `EraseType` trait which maps query values to their erased variant.
This is achieved by introducing an `Erased` type which does sanity check with `cfg(debug_assertions)`. The query caches gets instantiated with these erased types leaving the code in `rustc_query_system` unaware of them. `rustc_query_system` is changed to use instances of `QueryConfig` so that `rustc_query_impl` can pass in `DynamicConfig` which holds a pointer to a virtual table.
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7055s</td><td align="right">1.6949s</td><td align="right"> -0.62%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2547s</td><td align="right">0.2528s</td><td align="right"> -0.73%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9590s</td><td align="right">0.9553s</td><td align="right"> -0.39%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5457s</td><td align="right">1.5440s</td><td align="right"> -0.11%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.9092s</td><td align="right">5.9009s</td><td align="right"> -0.14%</td></tr><tr><td>Total</td><td align="right">10.3741s</td><td align="right">10.3479s</td><td align="right"> -0.25%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9960s</td><td align="right"> -0.40%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.0605s</td><td align="right">2.0575s</td><td align="right"> -0.15%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3218s</td><td align="right">0.3216s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.1848s</td><td align="right">1.1839s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">1.9409s</td><td align="right">1.9376s</td><td align="right"> -0.17%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.3105s</td><td align="right">7.2928s</td><td align="right"> -0.24%</td></tr><tr><td>Total</td><td align="right">12.8185s</td><td align="right">12.7935s</td><td align="right"> -0.20%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9986s</td><td align="right"> -0.14%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:unchanged</td><td align="right">0.4606s</td><td align="right">0.4617s</td><td align="right"> 0.24%</td></tr><tr><td>🟣 <b>hyper</b>:check:unchanged</td><td align="right">0.1335s</td><td align="right">0.1336s</td><td align="right"> 0.08%</td></tr><tr><td>🟣 <b>regex</b>:check:unchanged</td><td align="right">0.3324s</td><td align="right">0.3346s</td><td align="right"> 0.65%</td></tr><tr><td>🟣 <b>syn</b>:check:unchanged</td><td align="right">0.6268s</td><td align="right">0.6307s</td><td align="right"> 0.64%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:unchanged</td><td align="right">1.8248s</td><td align="right">1.8508s</td><td align="right">💔 1.43%</td></tr><tr><td>Total</td><td align="right">3.3779s</td><td align="right">3.4113s</td><td align="right"> 0.99%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">1.0061s</td><td align="right"> 0.61%</td></tr></table>
It's based on https://github.com/rust-lang/rust/pull/108167.
r? `@cjgillot`
Introduce `DynSend` and `DynSync` auto trait for parallel compiler
part of parallel-rustc #101566
This PR introduces `DynSend / DynSync` trait and `FromDyn / IntoDyn` structure in rustc_data_structure::marker. `FromDyn` can dynamically check data structures for thread safety when switching to parallel environments (such as calling `par_for_each_in`). This happens only when `-Z threads > 1` so it doesn't affect single-threaded mode's compile efficiency.
r? `@cjgillot`
Apply simulate-remapped-rust-src-base even if remap-debuginfo is set in config.toml
This is really a mess. Here is the situation before this change:
- UI tests depend on not having `rust-src` available. In particular, <3f374128ee/tests/ui/tuple/wrong_argument_ice.stderr (L7-L8)> is depending on the `note` being a single line and not showing the source code.
- When `download-rustc` is disabled, we pass `-Zsimulate-remapped-rust-src-base=/rustc/FAKE_PREFIX` `-Ztranslate-remapped-path-to-local-path=no`, which changes the diagnostic to something like ` --> /rustc/FAKE_PREFIX/library/alloc/src/collections/vec_deque/mod.rs:1657:12`
- When `download-rustc` is enabled, we still pass those flags, but they no longer have an effect. Instead rustc emits diagnostic paths like this: ` --> /rustc/39c6804b92aa202369e402525cee329556bc1db0/library/alloc/src/collections/vec_deque/mod.rs:1657:12`. Notice how there's a real commit and not `FAKE_PREFIX`. This happens because we set `CFG_VIRTUAL_RUST_SOURCE_BASE_DIR` during bootstrapping for CI artifacts, and rustc previously didn't allow for `simulate-remapped` to affect paths that had already been remapped.
- Pietro noticed this and decided the right thing was to normalize `/rustc/<commit>` to `$SRC_DIR` in compiletest: 470423c3d2
- After my change to `x test core`, which rebuilds stage 2 std from source so `build/stage2-std` and `build/stage2` use the same `.rlib` metadata, the compiler suddenly notices it has sources for `std` available and prints those in the diagnostic, causing the test to fail.
This changes `simulate-remapped-rust-src-base` to support remapping paths that have already been remapped, unblocking download-rustc.
Unfortunately, although this fixes the specific problem for
download-rustc, it doesn't seem to affect all the compiler's
diagnostics. In particular, various `mir-opt` tests are failing to
respect `simulate-remapped-path-prefix` (I looked into fixing this but
it seems non-trivial). As a result, we can't remove the normalization in
compiletest that maps `/rustc/<commit>` to `$SRC_DIR`, so this change is
currently untested anywhere except locally.
You can test this locally yourself by setting `rust.remap-debuginfo = true`, running any UI test with `ERROR` annotations, then rerunning the test manually with a dev toolchain to verify it prints `/rustc/FAKE_PREFIX`, not `/rustc/1.71.0`.
Helps with https://github.com/rust-lang/rust/issues/110352.
PhantomData: fix documentation wrt interaction with dropck
As far as I could find out, the `PhantomData`-dropck interaction *only* affects code using `may_dangle`. The documentation in the standard library has not been updated for 8 years and thus stems from a time when Rust still used "parametric dropck", before [RFC 1238](https://rust-lang.github.io/rfcs/1238-nonparametric-dropck.html). Back then what the docs said was correct, but with `may_dangle` dropck it stopped being entirely accurate and these days, with NLL, it is actively misleading.
Fixes https://github.com/rust-lang/rust/issues/102810
Fixes https://github.com/rust-lang/rust/issues/70841
Cc `@nikomatsakis` I hope what I am saying here is right.^^
Support linking to rust dylib with --crate-type staticlib
This allows for example dynamically linking libstd, while statically linking the user crate into an executable or C dynamic library. For this two unstable flags (`-Z staticlib-allow-rdylib-deps` and `-Z staticlib-prefer-dynamic`) are introduced. Without the former you get an error. The latter is the equivalent to `-C prefer-dynamic` for the staticlib crate type to indicate that dynamically linking is preferred when both options are available, like for libstd. Care must be taken to ensure that no crate ends up being merged into two distinct staticlibs that are linked together. Doing so will cause a linker error at best and undefined behavior at worst. In addition two distinct staticlibs compiled by different rustc may not be combined under any circumstances due to some rustc private symbols not being mangled.
To successfully link a staticlib, `--print native-static-libs` can be used while compiling to ask rustc for the linker flags necessary when linking the staticlib. This is an existing flag which previously only listed native libraries. It has been extended to list rust dylibs too. Trying to locate libstd yourself to link against it is not supported and may break if for example the libstd of multiple rustc versions are put in the same directory.
For an example on how to use this see the `src/test/run-make-fulldeps/staticlib-dylib-linkage/` test.
Start using `windows sys` for Windows FFI bindings in std
Switch to using windows-sys for FFI. In order to avoid some currently contentious issues, this uses windows-bindgen to generate a smaller set of bindings instead of using the full crate.
Unlike the windows-sys crate, the generated bindings uses `*mut c_void` for handle types instead of `isize`. This to sidestep opsem concerns about mixing pointer types and integers between languages. Note that `SOCKET` remains defined as an integer but instead of being a usize, it's changed to fit the [standard library definition](a41fc00eaf/library/std/src/os/windows/raw.rs (L12-L16)):
```rust
#[cfg(target_pointer_width = "32")]
pub type SOCKET = u32;
#[cfg(target_pointer_width = "64")]
pub type SOCKET = u64;
```
The generated bindings also customizes the `#[link]` imports. I hope to switch to using raw-dylib but I don't want to tie that too closely with the switch to windows-sys.
---
Changes outside of the bindings are, for the most part, fairly minimal (e.g. some differences in `*mut` vs. `*const` or a few types differ). One issue is that our own bindings sometimes mix in higher level types, like `BorrowedHandle`. This is pretty adhoc though.
Add `#[inline]` to functions that are never called
This makes libcore binary size reduce by ~300 bytes. Not much, but these functions are never called so it doesn't make sense for them to get into the binary anyway.
Always const-evaluate the GCD in `slice::align_to_offsets`
Use an inline `const`-block to force the compiler to calculate the GCD at compile time, even in debug mode. This shouldn't affect the behavior of the program at all, but it drastically cuts down on the number of instructions emitted with optimizations disabled.
With the current implementation, a single `slice::align_to` instantiation (specifically `<[u8]>::align_to::<u128>()`) generates 676 instructions (on x86-64). Forcing the GCD computation to be const cuts it down to 327 instructions, so just over 50% less. This is obviously not representative of actual runtime gains, but I still see it as a significant win as long as it doesn't degrade compile times.
Not having to worry about LLVM const-evaluating the GCD function also allows it to use the textbook recursive euclidean algorithm instead of a much more complicated iterative implementation with multiple `unsafe`-blocks.
Disable nrvo mir opt
See #111005 and #110902 . The ICE can definitely be hit on stable, the miscompilation I'm not sure about. The pass makes some pretty sketchy assumptions though, and we should not have it on while that's the case.
I'm not going to work on actually fixing this, it's probably not excessively difficult though.
r? rust-lang/mir-opt
ConstProp into PlaceElem::Index.
Noticed this while looking at keccak output MIR.
This pass aims to replace `ProjectionElem::Index` with `ProjectionElem::ConstantIndex` during ConstProp.
r? `@ghost`
Mark s390x condition code register as clobbered in inline assembly
Various s390x instructions (arithmetic operations, logical operations, comparisons, etc. see also "Condition Codes" section in [z/Architecture Reference Summary](https://www.ibm.com/support/pages/zarchitecture-reference-summary)) modify condition code register `cc`, but AFAIK there is currently no way to mark it as clobbered in `asm!`.
`cc` register definition in LLVM:
https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L320
This PR also updates asm_experimental_arch docs in the unstable-book to mention s390x registers.
cc `@uweigand`
r? `@Amanieu`
Remove `identity_future` from stdlib
This function/lang_item was introduced in #104321 as a temporary workaround of future lowering. The usage and need for it went away in #104833.
After a bootstrap update, the function itself can be removed from `std`.
Update max_atomic_width of armv7r and armv7_sony_vita targets to 64.
All armv7a and armv7r implementations support `ldrexd`/`strexd`, only armv7m does not.
enable `rust_2018_idioms` lint group for doctests
With this change, `rust_2018_idioms` lint group will be enabled for compiler/libstd doctests.
Resolves#106086Resolves#99144
Signed-off-by: ozkanonur <work@onurozkan.dev>
This function/lang_item was introduced in #104321 as a temporary workaround of future lowering.
The usage and need for it went away in #104833.
After a bootstrap update, the function itself can be removed from `std`.
Update the version of musl used on `*-linux-musl` targets to 1.2.3
Update the version of musl used on our Linux musl targets from 1.1.24 to 1.2.3 as proposed in rust-lang/compiler-team#572. musl 1.2.3 is the latest version of musl and supports the same range of Linux kernels as the 1.1 series. As such, it does not affect the minimum supported version of Linux for any of the musl targets.
One of the major musl 1.2 features is support for [time64](https://musl.libc.org/time64.html). This support is both source and ABI compatible with programs built against musl 1.1 and so updating the musl version for these targets should not cause Rust programs to fail to run or compile (a [crater run](https://github.com/rust-lang/rust/pull/107129#issuecomment-1407196104) has been completed which demonstrates this for the `i686-unknown-linux-musl` target).
Once this change reaches stable, the `libc` crate will then be able to [update their definitions to support 64-bit time](https://github.com/rust-lang/libc/pull/3068), matching the default musl 1.2 APIs exactly.
Fixes#91178
ci: upgrade and refactor crosstool-ng builders
The first commit upgrades our builders from crosstool-ng 1.24.0 to 1.25.0. There are otherwise no changes intended to the toolchains we're using, but there are some minor version upgrades as a result, especially GCC 8.3.0 to 8.5.0. The newer crosstool-ng will position us well to make toolchain upgrades in the future though, as we were maxed out before and it now goes up to GCC 11.
The second commit refactors our config management to only commit a "mini-defconfig" for each target, produced by `ct-ng savedefconfig`. This makes it much clearer which settings we're actually changing, and also makes it easier to ensure consistency for things like mirror management.
Optimize builder sizes
The infra-team is continuously monitoring the efficiency of the CI system in an effort to improve overall build times and resource usage. Some builders have used much less than their allocated resources, so we are testing smaller builder sizes for them.
r? `@pietroalbini`
Don't validate constants in const propagation
Validation is neither necessary nor desirable.
The constant validation is already omitted at mir-opt-level >= 3, so there there are not changes in MIR test output (the propagation of invalid constants is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
Parallelize initial Rust download in bootstrap
Parallelize the initial download of Rust in `bootstrap.py`
`time ./x.py --help` after `rm -r build`
Before: 33s
After: 27s
`inline(always)` for `lt`/`le`/`ge`/`gt` on integers and floats
I happened to notice one of these not getting inlined as part of `Range::next` in <https://rust.godbolt.org/z/4WKWWxj1G>
```rust
bb1: {
StorageLive(_5);
_6 = &mut _4;
StorageLive(_21);
StorageLive(_14);
StorageLive(_15);
_15 = &((*_6).0: usize);
StorageLive(_16);
_16 = &((*_6).1: usize);
_14 = <usize as PartialOrd>::lt(move _15, move _16) -> bb7;
}
```
So since a call for something that's just one instruction is never the right choice, `#[inline(always)]` seems appropriate, like we have it on things like the rotate methods on integers.
