`rustup` can now install `rust-analyzer` for the stable tool-chain. This commit removes the note that `rustup` can only install for the nightly branch and adjusts the command.
I also added a note on how to find the path to the `rust-analyzer` binary when installed using `rustup`, and suggestions on how to work around it not being placed in `~/.cargo/bin`.
I thought it would be ideal to point everyone to use `rustup run stable rust-analyzer` to start `rust-analyzer`. That would make it trivial to switch to nightly however I could not get this to work in `nvim` therefore I left it as a suggestion at the end.
Add a new configuration settings to set env vars when running cargo, rustc, etc. commands: cargo.extraEnv and checkOnSave.extraEnv
It can be extremely useful to be able to set environment variables when rust-analyzer is running various cargo or rustc commands (such as `cargo check`, `cargo --print cfg` or `cargo metadata`): users may want to set custom `RUSTFLAGS`, change `PATH` to use a custom toolchain or set a different `CARGO_HOME`.
There is the existing `server.extraEnv` setting that allows env vars to be set when the rust-analyzer server is launched, but using this as the recommended mechanism to also configure cargo/rust has some drawbacks:
- It convolutes configuring the rust-analyzer server with configuring cargo/rustc (one may want to change the `PATH` for cargo/rustc without affecting the rust-analyzer server).
- The name `server.extraEnv` doesn't indicate that cargo/rustc will be affected but renaming it to `cargo.extraEnv` doesn't indicate that the rust-analyzer server would be affected.
- To make the setting useful, it needs to be dynamically reloaded without requiring that the entire extension is reloaded. It might be possible to do this, but it would require the client communicating to the server what the overwritten env vars were at first launch, which isn't easy to do.
This change adds two new configuration settings: `cargo.extraEnv` and `checkOnSave.extraEnv` that can be used to change the environment for the rust-analyzer server after launch (thus affecting any process that rust-analyzer invokes) and the `cargo check` command respectively. `cargo.extraEnv` supports dynamic changes by keeping track of the pre-change values of environment variables, thus it can undo changes made previously before applying the new configuration (and then requesting a workspace reload).
Allow configuration of annotation location.
I've added the ability to configure where lens annotations render relevant to the item they describe. Previously, these would render directly above the line the item is declared on. Now, there is the ability to render these annotations above the entire item (including doc comments, and attributes).
The names of the config options are up for debate, I did what seemed best to me but if anyone has better ideas let me know.
This is my first contribution so if I've missed anything please let me know.
Here's a preview of what the new option looks like:
<img width="577" alt="Screen Shot 2022-09-11 at 10 39 51 PM" src="https://user-images.githubusercontent.com/33100798/189570298-b4fcbf9c-ee49-4b79-aae6-1037ae4f26af.png">
closes https://github.com/rust-lang/rust-analyzer/issues/13218
Previously, annotations would only appear above the name of an item (function signature, struct declaration, etc).
Now, rust-analyzer can be configured to show annotations either above the name or above the whole item (including doc comments and attributes).
This PR will fix some typos detected by [typos].
There are also some other typos in the function names, variable names, and file
names, which I leave as they are. I'm more certain that typos in comments
should be fixed.
[typos]: https://github.com/crate-ci/typos
Config revamp
Fixes https://github.com/rust-lang/rust-analyzer/issues/11790
Fixes https://github.com/rust-lang/rust-analyzer/issues/12115
This PR changes a lot of config names, and a few ones are being merged or split apart. The reason for this is that our configuration names currently are rather inconsistent and some where poorly chosen in regards to extensability. This PR plans to fix that.
We still allow the old config names by patching them to the new ones before deserializing to keep backwards compatability with other clients (the VSCode client will auto update the config) but ideally we will get rid of that layer in the future.
Here is a list of the changes:
These are simple renames `old_name | alias1 | alias2 ... -> new_name` (the vscode client will fix these up automagically):
```
assist_allowMergingIntoGlobImports -> imports_merge_glob
assist_exprFillDefault -> assist_expressionFillDefault
assist_importEnforceGranularity -> imports_granularity_enforce
assist_importGranularity | assist_importMergeBehavior | assist_importMergeBehaviour -> imports_granularity_group
assist_importGroup -> imports_group_enable
assist_importPrefix -> imports_prefix
cache_warmup -> primeCaches_enable
cargo_loadOutDirsFromCheck -> cargo_buildScripts_enable
cargo_runBuildScripts | cargo_runBuildScriptsCommand -> cargo_runBuildScripts_overrideCommand
cargo_useRustcWrapperForBuildScripts -> cargo_runBuildScripts_useRustcWrapper
completion_snippets -> completion_snippets_custom
diagnostics_enableExperimental -> diagnostics_experimental_enable
experimental_procAttrMacros -> procMacro_attributes_enable
highlighting_strings -> semanticHighlighting_strings_enable
highlightRelated_breakPoints -> semanticHighlighting_breakPoints_enable
highlightRelated_exitPoints -> semanticHighlighting_exitPoints_enable
highlightRelated_yieldPoints -> semanticHighlighting_yieldPoints_enable
highlightRelated_references -> semanticHighlighting_references_enable
hover_documentation -> hover_documentation_enable
hover_linksInHover | hoverActions_linksInHover -> hover_links_enable
hoverActions_debug -> hoverActions_debug_enable
hoverActions_enable -> hoverActions_enable_enable
hoverActions_gotoTypeDef -> hoverActions_gotoTypeDef_enable
hoverActions_implementations -> hoverActions_implementations_enable
hoverActions_references -> hoverActions_references_enable
hoverActions_run -> hoverActions_run_enable
inlayHints_chainingHints -> inlayHints_chainingHints_enable
inlayHints_closureReturnTypeHints -> inlayHints_closureReturnTypeHints_enable
inlayHints_hideNamedConstructorHints -> inlayHints_typeHints_hideNamedConstructorHints
inlayHints_parameterHints -> inlayHints_parameterHints_enable
inlayHints_reborrowHints -> inlayHints_reborrowHints_enable
inlayHints_typeHints -> inlayHints_typeHints_enable
lruCapacity -> lru_capacity
runnables_cargoExtraArgs -> runnables_extraArgs
runnables_overrideCargo -> runnables_command
rustcSource -> rustc_source
rustfmt_enableRangeFormatting -> rustfmt_rangeFormatting_enable
```
These are configs that have been merged or split apart, which have to be manually updated by the user:
```
callInfo_full -> signatureInfo_detail, signatureInfo_documentation_enable
cargo_allFeatures, cargo_features -> cargo_features
checkOnSave_allFeatures, checkOnSave_features -> checkOnSave_features
completion_addCallArgumentSnippets completion_addCallParenthesis -> completion_callable_snippets
```
[Documentation]: Update developer documentation link.
Just noticed the docs links broken. The current doc link was broken. replaced with the updated version as found on the front page. Should the rest of the links be updated?
feat: allow customizing the command for running build scripts
I have tested this locally and it fixed#9201 with some small changes on the compiler side with suggestions from https://github.com/rust-analyzer/rust-analyzer/issues/9201#issuecomment-1019554086.
I have also added an environment variable `IS_RA_BUILDSCRIPT_CHECK` for crates to detect that it is a check for buildscripts, and allows defaulting to bogus values for expected environment variables.
10802: Allow clients to configure the global workspace search limit r=Veykril a=knutwalker
Playing around with [helix](https://helix-editor.com) I realized that the global worksapce symbol search works different compared to vs-code.
Helix requires all possible symbols in one query and does no subsequent refinement searched.
This PR adds a configuration option to override the default search limit with the default being the currently hardocded value.
Helix users can increment this limit for their instance with a config like
```toml
[[language]]
name = "rust"
language-server = { command = "rust-analyzer" }
[language.config]
workspace = { symbol = { search = { limit = 65536 }}}
```
Other editors are not affected by this change.
Co-authored-by: Paul Horn <dev@knutwalker.engineer>
Keep things consistent with the package.json , which uses `self` and
`crate` instead of `by_self` and `by_crate`. Both names are in fact
allowed as aliases, but we should be consistent so that people reading
the docs and using a schema do not see red squiggles.
Closes#6883
This functionality was changed as of #11445 and now can be customized using native VSCode settings instead of `rust-analyzer`-specific ones.
11445: Upstream inlay hints r=lnicola a=lnicola
Closes https://github.com/rust-analyzer/rust-analyzer/issues/2797
Closes https://github.com/rust-analyzer/rust-analyzer/issues/3394 (since now resolve the hints for the range given only, not for the whole document. We don't actually resolve anything due to [hard requirement](https://github.com/rust-analyzer/rust-analyzer/pull/11445#issuecomment-1035227434) on label being immutable. Any further heavy actions could go to the `resolve` method that's now available via the official Code API for hints)
Based on `@SomeoneToIgnore's` branch, with a couple of updates:
- I squashed, more or less successfully, the commits on that branch
- downloading the `.d.ts` no longer works, but you can get it manually from https://raw.githubusercontent.com/microsoft/vscode/release/1.64/src/vscode-dts/vscode.proposed.inlayHints.d.ts
- you might need to pass `--enable-proposed-api matklad.rust-analyzer`
- if I'm reading the definition right, `InlayHintKind` needs to be serialized as a number, not string
- this doesn't work anyway -- the client-side gets the hints, but they don't display
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Laurențiu Nicola <lnicola@dend.ro>
11145: feat: add config to use reasonable default expression instead of todo! when filling missing fields r=Veykril a=bnjjj
Use `Default::default()` in struct fields when we ask to fill it instead of putting `todo!()` for every fields
before:
```rust
pub enum Other {
One,
Two,
}
pub struct Test {
text: String,
num: usize,
other: Other,
}
fn t_test() {
let test = Test {<|>};
}
```
after:
```rust
pub enum Other {
One,
Two,
}
pub struct Test {
text: String,
num: usize,
other: Other,
}
fn t_test() {
let test = Test {
text: String::new(),
num: 0,
other: todo!(),
};
}
```
Co-authored-by: Benjamin Coenen <5719034+bnjjj@users.noreply.github.com>
Co-authored-by: Coenen Benjamin <benjamin.coenen@hotmail.com>
9752: feature: Declare proc-macro dependent crates in `rust-project.json` r=matklad a=tobywf
This adds the `is_proc_macro` flag in `rust-project.json`. By default, this is `false` and not required, so existing projects won't break/have the same behavior as before this change. If the flag is true, a dependency to the `proc_macro` sysroot crate is added (if it exists), so that rust-analyzer can resolve those imports.
This fixes#9726 .
I've also added some tests in the second commit. The first is a smoke test for a basic, minimal `rust-project.json` file. The second is a more targeted test for the flag. Both tests depend on the fake sysroot (a bunch of directories in the correct layout with empty `lib.rs` files), and also on `env!("CARGO_MANIFEST_DIR")` being an absolute path. I'm not sure if the later assumption is valid on all platforms. I wanted to at least try and add tests, but I'm happy to rework them or remove them if you don't think that's the way to go.
(You can license/relicense my contribution in any way you wish without contacting me.)
Co-authored-by: Toby Fleming <sourcecode@tobywf.com>
Being new to Rust I wasn't familiar with this acronym and found it hard to guess (the context of syntax trees biased me to reading it as a D-something Syntax Tree and trying to guess what the D was), hard to google (in retrospect googling "rust dst" does the job, but I thought it was an abstract structure thing, not Rust-specific), and hard to Github-search, because `dst` is commonly short for “destination” in code.
Alternatively `<abbr title="dynamically sized type">DST</abbr>` would be about as helpful.
Some features of rust-analyzer requires support for custom commands on
the client side. Specifically, hover & code lens need this.
Stock LSP doesn't have a way for the server to know which client-side
commands are available. For that reason, we historically were just
sending the commands, not worrying whether the client supports then or
not.
That's not really great though, so in this PR we add infrastructure for
the client to explicitly opt-into custom commands, via `extensions`
field of the ClientCapabilities.
To preserve backwards compatability, if the client doesn't set the
field, we assume that it does support all custom commands. In the
future, we'll start treating that case as if the client doesn't support
commands.
So, if you maintain a rust-analyzer client and implement
`rust-analyzer/runSingle` and such, please also advertise this via a
capability.
9692: Use same cancelled spelling in doc and code. r=matklad a=mattiasgronlund
Right thing might be to update the spelling in the code to
follow American instead of English spelling, that is
using only canceled. But they should at least be aligned.
Co-authored-by: Mattias Grönlund <mattias@gronlund.se>
Right thing might be to update the spelling in the code to
follow American instead of English spelling, that is
using only canceled. But they should at least be aligned.
9634: minor update to excludeDirs doc r=lnicola a=dae
I saw reference to globs in #7755, but it doesn't look like they're
actually supported, and I had to dig through the source to discover
that the folders are relative to the workspace root. Further digging
was required to get VS Code from hanging for long periods trying to
watch giant Bazel folders that had already been excluded from Rust
Analyzer. Hopefully this tweak will save others the confusion :-)
Co-authored-by: Damien Elmes <gpg@ankiweb.net>
Co-authored-by: Damien Elmes <dae@users.noreply.github.com>
I saw reference to globs in #7755, but it doesn't look like they're
actually supported, and I had to dig through the source to discover
that the folders are relative to the workspace root. Further digging
was required to get VS Code from hanging for long periods trying to
watch giant Bazel folders that had already been excluded from Rust
Analyzer. Hopefully this tweak will save others the confusion :-)
One source completion can produce up to two lsp completions.
Additionally, `preselct` and `sort_text` are global properties of the
whole set of completions, so the right granularity here is to convert
many completions.
As a side-benefit, we no loger allocate intermediate vec.
* Keep codegen adjacent to the relevant crates.
* Remove codgen deps from xtask, speeding-up from-source installation.
This regresses the release process a bit, as it now needs to run the
tests (and, by extension, compile the code).
9348: output to log file if RA_LOG_FILE is defined in environment r=rezural a=rezural
This adds a check for RA_LOG_FILE, and logs to that if defined. It currently overrides flags.log_file. If this is undesirable, I will add a check.
Co-authored-by: rezural <rezural@protonmail.com>
9264: feat: Make documentation on hover configurable r=Veykril a=Veykril
This also implements deprecation support for config options as this renames `hoverActions_linksInHover` to `hover_linksInHover`.
Fixes#9232
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9227: Add a config setting to disable the 'test' cfg in specified crates r=matklad a=lf-
If you are opening libcore from rust-lang/rust as opposed to e.g.
goto definition from some other crate which would use the sysroot
instance of libcore, a `#![cfg(not(test))]` would previously have made
all the code excluded from the module tree, breaking the editor
experience.
Core does not need to ever be edited with `#[cfg(test)]` enabled,
as the tests are in another crate.
This PR puts in a slight hack that checks for the crate name "core" and
turns off `#[cfg(test)]` for that crate.
Fixes#9203Fixes#9226
Co-authored-by: Jade <software@lfcode.ca>
9267: fix: Code: update the LSP server without asking r=matklad a=lnicola
Most LSP extensions seem to do the same thing, and this is causing some
confusion for users who don't notice the update prompt before Code hides
it.
9279: minor: Document installation via Homebrew r=matklad a=Svetlitski
`rust-analyzer` can be installed via [Homebrew](https://brew.sh) (AKA`brew`) on macOS. I've added instructions on how to do so to the documentation. Additionally, I added a `.gitignore` rule to ignore the HTML documentation produced by `asciidoctor manual.adoc` so that it is not accidentally checked into `git`.
Co-authored-by: Laurențiu Nicola <lnicola@dend.ro>
Co-authored-by: Kevin Svetlitski <kevin_svetlitski@berkeley.edu>
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
8767: implement range formatting r=matklad a=euclio
Fixes#7580.
This PR implements the `textDocument/rangeFormatting` request using `rustfmt`'s `--file-lines` option.
Still needs some tests. What I want to know is how I should handle the instability of the `--file-lines` option. It's still unstable in rustfmt, so it's only available on nightly, and needs a special flag to enable. Is there a way for `rust-analyzer` to detect if it's using nightly rustfmt, or for users to opt-in?
Co-authored-by: Andy Russell <arussell123@gmail.com>
8873: Implement import-granularity guessing r=matklad a=Veykril
This renames our `MergeBehavior` to `ImportGranularity` as rustfmt has it as the purpose of them are basically the same. `ImportGranularity::Preserve` currently has no specific purpose for us as we don't have an organize imports assist yet, so it currently acts the same as `ImportGranularity::Item`.
We now try to guess the import style on a per file basis and fall back to the user granularity setting if the file has no specific style yet or where it is ambiguous. This can be turned off by setting `import.enforceGranularity` to `true`.
Closes https://github.com/rust-analyzer/rust-analyzer/issues/8870
Co-authored-by: Lukas Tobias Wirth <lukastw97@gmail.com>
The new extension allows filtering of workspace symbool lookup
results by search scope or search kind.
Filtering can be configured in 3 different ways:
- The '#' or '*' markers can be added inline with the symbol lookup
query.
The '#' marker means symbols should be looked up in the current
workspace and any dependencies. If not specified, only current
workspace is considered.
The '*' marker means all kinds of symbols should be looked up
(types, functions, etc). If not specified, only type symbols are
returned.
- Each LSP request can take an optional search_scope or search_kind
argument query parameter.
- Finally there are 2 global config options that can be set for all
requests served by the active RA instance.
Add support for setting the global config options to the VSCode
extension.
The extension does not use the per-request way, but it's useful for
other IDEs.
The latest version of VSCode filters out the inline markers, so
currently the only reasonable way to use the new functionality is
via the global config.
8795: Allow semantic tokens for strings to be disabled r=matklad a=djrenren
Fixes https://github.com/rust-analyzer/rust-analyzer/issues/7111
Pretty straightforward change, but open to any suggestions if there's a more recommended testing strategy than what I went with.
Co-authored-by: John Renner <john@jrenner.net>
8482: Mention how to customize unsafe operation styles r=matklad a=danielzfranklin
I was confused about how to do this, so I filed #8474. I apologize for initially filing this incorrectly and spamming people.
Co-authored-by: Daniel Franklin <daniel@danielzfranklin.org>
* don't feel obliged to quickly review every PR assigned to you
* so that other folks can notify you about interesting PRs without
thinking to much about creating additional work for you
8510: Move cursor position when using item movers r=jonas-schievink a=jonas-schievink
This updates the cursor position when moving items around to stay in the same location within the moved node.
I changed the `moveItem` response to `SnippetTextEdit[]`, since that made more sense to me (the file was ignored by the client anyways, since the edits always apply to the current document). It also matches `onEnter`, which seems logical to me, but please let me know if this doesn't make sense.
There's still a bug in the client-side snippet code that will cause the cursor position to be slightly off when moving parameters in the same line (presumably we don't track the column correctly after deleting `$0`). Not really sure how to fix that immediately, but this PR should already be an improvement despite that bug.
8533: Fix typo in style guide r=jonas-schievink a=jonas-schievink
Fixes bold text rendering
bors r+
Co-authored-by: Jonas Schievink <jonasschievink@gmail.com>
8432: decl_check: consider outer scopes' allows r=jonas-schievink a=lf-
Fix#8417. Also makes it less noisy about no_mangle annotated stuff the
user can do nothing about.
Note: this still is broken with bitfield! macros. A repro in an ignore
test is included here. I believe this bug is elsewhere, and I don't
think I can work around it here.
I would like help filing the remaining bug, as it does actually affect
users, but I don't know how to describe the behaviour (or even if it
is unintended).
Co-authored-by: Jade <software@lfcode.ca>
Fix#8417. Also makes it less noisy about no_mangle annotated stuff the
user can do nothing about.
Note: this still is broken with bitfield! macros. A repro in an ignore
test is included here. I believe this bug is elsewhere, and I don't
think I can work around it here.
8136: Introduce QuantifiedWhereClause and DynTy analogous to Chalk r=flodiebold a=flodiebold
This introduces a bunch of new binders in lots of places, which we have to be careful about, but we had to add them at some point. There's a lot of skipping of the binders; once we're done with the Chalk move, we should review the remaining ones.
8146: Document patch policy r=matklad a=matklad
bors r+
🤖
Co-authored-by: Florian Diebold <flodiebold@gmail.com>
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
7891: Improve handling of rustc_private r=matklad a=DJMcNab
This PR changes how `rust-analyzer` handles `rustc_private`. In particular, packages now must opt-in to using `rustc_private` in `Cargo.toml`, by adding:
```toml
[package.metadata.rust-analyzer]
rustc_private=true
```
This means that depending on crates which also use `rustc_private` will be significantly improved, since their dependencies on the `rustc_private` crates will be resolved properly.
A similar approach could be used in #6714 to allow annotating that your package uses the `test` crate, although I have not yet handled that in this PR.
Additionally, we now only index the crates which are transitive dependencies of `rustc_driver` in the `rustcSource` directory. This should not cause any change in behaviour when using `rustcSource: "discover"`, as the source used then will only be a partial clone. However, if `rustcSource` pointing at a local checkout of rustc, this should significantly improve the memory usage and lower indexing time. This is because we avoids indexing all crates in `src/tools/`, which includes `rust-analyzer` itself.
Furthermore, we also prefer named dependencies over dependencies from `rustcSource`. This ensures that feature resolution for crates which are depended on by both `rustc` and your crate uses the correct set for analysing your crate.
See also [introductory zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/185405-t-compiler.2Fwg-rls-2.2E0/topic/Fixed.20crate.20graphs.20and.20optional.20builtin.20crates/near/229086673)
I have tested this in [priroda](https://github.com/oli-obk/priroda/), and it provides a significant improvement to the development experience (once I give `miri` the required data in `Cargo.toml`)
Todo:
- [ ] Documentation
This is ready to review, and I will add documentation if this would be accepted (or if I get time to do so anyway)
Co-authored-by: Daniel McNab <36049421+DJMcNab@users.noreply.github.com>
7643: Automatically detect the rustc-src directory (fixes#3517) r=matklad a=bnjbvr
If the configured rustcSource was not set, then try to automatically
detect a source for the sysroot rustc directory.
I wasn't sure how to do it in the case of the project.json file, though.
7663: Tolerate spaces in nix binary patching r=matklad a=CertainLach
If path to original file contains space (I.e on code insiders, where
default data directory is ~/Code - Insiders/), then there is syntax
error evaluating src arg.
Instead pass path as str, and coerce to path back in nix expression
Co-authored-by: Benjamin Bouvier <public@benj.me>
Co-authored-by: Yaroslav Bolyukin <iam@lach.pw>
`vim-lsp` is another popular LSP client for Vim. And, as there is no
`rust-analyzer` specific UI, it is non-trivial to figure out how the
initial configuration is performed.
Use `npm ci` instead of `npm install`. `npm install` will overwrite
the lock file if you have a newer npm version than the one that
generated the package-lock.json
