This was the next most expensive require in the analysis.
Also rearranged the way that ui handled tables to be lazy.
```
% SLOW=1 time rake test:functional
before: Finished in 681.514579s, 0.5136 runs/s, 2.9919 assertions/s.
after : Finished in 642.655918s, 0.5446 runs/s, 3.1728 assertions/s.
```
Signed-off-by: Ryan Davis <zenspider@chef.io>
Sometime during the 2.x's, `at_exit` changed its ordering. As a result,
a lot of things that were stacking `at_exit`'s broke. This is one of
those since both simplecov and minitest do their thing via `at_exit`.
This switches to simplecov w/ no defaults on, then replicates their
simplecov/defaults.rb with our own.
I'm going to try to get that entire file back upstream but it can live
here for now.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Skip most everything.
After some digging, in those tests that didn't have 100% failures, of
the ~10+% passing, those tests weren't checking enough. So I skip them
too in the hopes that we improve testing across the board.
At this point, we need appveyor to be green more than we need these
tests to be fixed. If that means we skip them, so be it.
These tests will time-bomb at the end of July.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Added InspecTest (which we should use across the board) and
ParallelTest (which we should use selectively and with metrics) to
helper.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Essentially, the way rspec does stuff is pretty rude. By injecting
singleton methods into main (instead of Kernel, where all top-level
methods go) and "cleaning" them up using undef_method instead of
remove_method makes it pretty hard for anything else in the testing
arena to operate. I've already fixed the case where rspec would
overwrite minitest's `describe` in a way that made it very hard to put
back, but my fix didn't prevent rspec from doing it _AGAIN_.
This fixes the case where after some rspec interactions, mocha's
`any_instance` method would just disappear. I never did figure out
where or why this was happening, but I did address the how.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Turns out we don't even use CMD in any units... so why make it?
Lots of other stuff got ripped out. Tests basically shouldn't need to
require anything but 1 implementation file and a test framework.
Anything more than that is a smell.
Signed-off-by: Ryan Davis <zenspider@chef.io>
This speeds up parallel unit test runs from a very consistent 2:49 to
a very consistent 1:53, or a 33% reduction.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Add CHEF_LICENSE env variable.
+ Switch to using powershell to invoke inspec.
I still think we should look into using `spawn`, but this is a good
start.
This probably doesn't fix the rest of the tests, but they're SO slow
locally that I'm gonna start this PR.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Not sure how it was supposed to work in the first place. The plugin in
question depends on ordinal_array and that wasn't in that fixture dir.
Switching to 2 is all it apparently needed.
This does cause yet another double-load warning (VERSION already
defined). I don't know how we're supposed to get around that with the
way we've set up these tests.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Helps testing and lots of other things if we only use $stdout/$stderr.
STDOUT/STDERR should only be used to restore the globals.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Trying to fix file_test failure that only happens on travis.
The "mock" file in question is supposed to have a stat of 644, but
actually has 664 but only on travis-ci.
Signed-off-by: Ryan Davis <zenspider@chef.io>
This time between:
+ PluginManagerCliDefinitionTests#(?:test_plugin_registered
+ PluginLoaderTests#test_load_mock_plugin_by_gem
Signed-off-by: Ryan Davis <zenspider@chef.io>
Specifically, if these were run in this order:
+ PluginLoaderTests#test_load_mock_plugin_by_gem
+ PluginInstallerInstallationTests#test_install_a_gem_from_local_file
the latter would fail.
The failure was in test setup. The solution was partially to crib off
of and normalize with LoaderTest setup/teardown and partially to set extra things.
Specifically:
+ HOME wasn't being set so it was finding my ~/.inspec/plugins.json
+ ENV wasn't being reset for Gem.paths
+ Installer wasn't being reset correctly, so plugins were known across tests.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Added SLOW=1 to appveyor (I hope?) and travis.
+ Off by default.
Speeds up installer tests from ~5.5 seconds to ~0.5 seconds.
Once this is established, we can push this up to the main helper and
generalize if it works out for us.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ Do extra cleanup of loaded_specs for the dependencies.
+ Ensure rake is actually activated.
Fixes#4030.
Fixes#4026.
Signed-off-by: Ryan Davis <zenspider@chef.io>
As commented, I'm happy to push this to our tests, but it does seem
odd that we'd install rdoc/ri for plugins.
Signed-off-by: Ryan Davis <zenspider@chef.io>
+ float? comparison can raise a TypeError
+ octal? comparison was allowing non-octal values (which cast to 0)
+ symbol comparison was casting to a string, but then doing an == check instead of casecmp.
The latter seems optional, but consistent with the intent of cmp.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Moved exec_inspec to inspec_path.
Added new exec_inspec that invokes ruby w/ -Ilib (expanded).
Decouples from bundler and/or needing inspec-bin to be installed.
Signed-off-by: Ryan Davis <zenspider@chef.io>
Can also try to use the bundler version first and then fall back to
VERSION... but VERSION is absolutely free.
Happy to push an edit to this to remove the comment or fold it in.
Signed-off-by: Ryan Davis <zenspider@chef.io>
This was testing serverspec compatibility, but those days are long past us and this is a deprecated resource now. This will quiet our tests up a bit.
Signed-off-by: Tim Smith <tsmith@chef.io>
RSpec is used internally. Minitest is used for our tests. They don't
really like each other. This fixes that and gets our tests
consistently running the correct number of tests (they were load-order
dependent before and each platform had its own different number of
tests it would run).
Signed-off-by: Ryan Davis <zenspider@chef.io>
These tests both involve dynamic un-rooted classes. As such, they have
no name and thus print like #<Class:0xXXXXXXXX:...>. I switched one to
a describe instead of Class.new(Minitest::Test) and the other I
stringified the anonymous class.
Signed-off-by: Ryan Davis <zenspider@chef.io>
The #disable_telemetry method now toggles @telemetry_toggle_off.
The @telemetry_toggle_off is defaulted to false
The #telemetry_enabled? method now checks @telemetry_toggle_off
and we generally check the configuration. We do not flip
@telemetry_toggle_off based on the content of the configuration.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
Because of the way the test system loads I cannot guarantee that
`Inspec::Config.cached` won't be nil. I have to always pass in a mock
config object with our setting.
Signed-off-by: Miah Johnson <miah@chia-pet.org>
+ Turn off verbosity in Rakefile by default. Use `rake V=1` to turn back on.
+ MiniTest -> Minitest everywhere.
+ MiniTest::Unit::TestCase -> Minitest::Test everywhere.
+ Updated minitest doco urls to official and up-to-date site.
+ Normalize requires. Only needs "minitest/autorun" and "minitest/pride".
Signed-off-by: Ryan Davis <zenspider@chef.io>
Adds missing functionality to `interface`. Fixes#1830
```
describe interface("eth0") do
its(ipv4_addresses) { should include 1.2.3.4 }
end
```
And so on... see diff/docs for additional matchers.
Signed-off-by: Matt Kulka <mkulka@parchment.com>
This converts all current deprecation warnings/TODOs to use the
`Inspec.deprecate()` deprecation facility.
This also modifies `Inspec.deprecate()` to only require 1 argument.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
By specifying a `max_redirects` attribute, the `http` resource worker
will follow any HTTP Redirect response (301, 302, etc...) up to the
limit defined by this attribute. For a local worker, exceeding that
limit will raise a `FaradayMiddleware::RedirectLimitReached` exception.
For a remote worker, the curl command will exit without populating the
`status` and `body` properties.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
This works around a current bug in PowerShell where the output cannot be
parsed as JSON.
The `-Compress` flag does not affect the validity of the data but only
the appearance of the string.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This does the following:
- Captures warning for lack of `--sudo` with `--sudo-password`
- Captures warnings for transformation of URL target in url fetcher
- Changes deprecated `supports:` syntax to use new syntax
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Remove container setup that comes for free with the dokken containers now
Use the new openssl resource names
Remove all the encoding statements that even rubocop doesn't recommend anymore
Remove some compatibility with centos-5 and ubuntu 15.10
Signed-off-by: Tim Smith <tsmith@chef.io>
We run apt_update once with chef and we already update the cache directly on the container at start. We don't need to try to do the same thing 3 other times.
Signed-off-by: Tim Smith <tsmith@chef.io>
We have an apt_update resource now
Yum cookbook was never needed
dnf is now supported on Fedora out of the box
Signed-off-by: Tim Smith <tsmith@chef.io>
With the changes in PR #3750, `Inspec::Backend.create` needs to support
both being passed a Hash and being passed an Inspec::Config. This adds
a line to convert a passed Hash to an Inspec::Config.
This also adds unit tests for Inspec::Backend because they were missing.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This changes the error message from using a bad reference in
`include_controls` from:
```
NoMethodError: undefined method `profile' for nil:NilClass
```
To one detailing that the profile cannot be loaded since it isn't listed
as a dependency.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This ensures that all the following result in the same CLI output:
- `inspec`
- `inspec help`
- `inspec --help`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This removes the following line from the test output:
```
Test Summary: 0 successful, 0 failures, 0 skipped
```
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
The value of `ciphers` is 681 on my localhost, but 993 on Travis.
This modifies the test to allow both values.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Currently our supported profiles output a warning for every instance of `inspec check` because our license metadata `Proprietary, All rights reserved` is not considered valid.
This commit allows for a string beginning with `Proprietary` to be considered valid, as well as any valid SPDX value.
Signed-off-by: James Stocks <jstocks@chef.io>
This PR adds 5 closely related plugin types, which allow a plugin to implement new DSL methods / keywords. The mechanism to activate the plugins are all very similar - basically, in a particular location in the code, `method_missing` is implemented, and is used to activate the particular type of DSL being requested.
4 of the DSL plugin types relate to code that could appear in a profile control file.
* outer_profile_dsl plugins allow you to extend the code in profile Ruby files that appear outside `control` or `describe` blocks.
* control_dsl plugins allow you to extend the code within `control` blocks.
* describe_dsl plugins allow you to extend the code within `describe` blocks.
* test_dsl plugins allow you to extend the code within `it`/`its` blocks.
Finally, the `resource_dsl` plugin allows you to extend the code used within custom resources.
Basic unit tests are provided to prove that the plugin types are properly defined.
A simple plugin fixture defining DSL hooks (based on favorite foods) is included, and is exercised through a set of functional tests.
The plugin developer docs are updated to describe the 5 DSLs.
*Note*: Implementing a plugin using any of the DSL plugin types is experimental. The contexts that are exposed to the DSL methods are private and poorly documented. The InSpec project does not claim the APIs used by these plugin types are covered by SemVer. Plugin authors are encouraged to pin tightly to the `inspec` gem in their gemspecs.
Motivation for this plugin comes from the desire to allow passionate community members to implement things like "2 out of 3" tests, example groups, improved serverspec compatibility, "they/their" and other "fluency" changes, as well as make it possible for future work by the InSpec team to be implemented as a core plugin, rather than a direct change to the main codebase.
* add aws_eks_cluster
Signed-off-by: Timothy van Zadelhoff
timothy.inspec@theothersolution.nl
* disable ABC check on fetch_from_api
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* add status predicates
* Change docs for status attribute
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* Add integration tests
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl>
* Adjust EKS build code to almost work
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* EKS only uses private subnets - integration tests pass
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Correct AWS Exception class for resource search miss in unit test
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update unit test to reflect AWS resource-standard miss behavior, returning nil for most properties
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Update package.rb to solve issue #3361
Update the windows package search regex.
According to issue #3361
* Update package.rb
Fix trailing spaces
* Update helper.rb
update sha for get-item-package. To fix the issue #3361
Signed-off-by: markus hackethal <mh@it31.de>
* Improve filesystem.rb to support windows
improve filesystem.rb to support windows.
Split into 2 classes LinuxFileSystemResource / WindowsFileSystemResource
Add filesystem to verify a FS-type ( currently not for linux because missing test server )
Size on Windows is converted to GB - discussion about this welcome
update to reflect also windows os
* Create get-wmiobject-filesystem
* Delete get-wmiobject-filesystem
* Fix the testing code for filesystem.
Change its 'filesystem' to 'type' according to recommendation from @miah
Signed-off-by: Markus Hackethal <mh@it31.de>
* Revert "Silence RSpec 'should' Warning (#3560)"
This reverts commit 7c611a4c24.
* Add comment with link to reverted fix
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add run_inspec_process, with JSON handling, to functional helper
* Add ability to run a plugin to functional helper
* CWD fix for run_inspec_process
* Add support for running a plugin within a functional test
* Move plugin functional helper code to main func helper file
* FuncHelper: Do not send reporter or lock options if command is not exec
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* unit tests for plugin conf file class, all skip
* File path stuff works
* Validation works
* Add works
* Added remove_entry
* Save works - ready to refactor others
* Rework Loader to use ConfigFile
* Modify loader and installer to use the config file class
* linting
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* When pty is used not having --no-pager makes inspec hang during the test
* Updated tests
Signed-off-by: Jose Alexandre <jose.alexandre@worldfirst.com>
* add security-group to security-group rules
* update docs
* Add integration tests for security-group to security-group rules
* rubocop fix
* Add one security group rule, with position.
* make control fit description
Signed-off-by: Timothy van Zadelhoff <timothy.inspec@theothersolution.nl
* Add support for `git@` and HTTP basic auth
This adds support for the following:
```
inspec exec git@github.com:private/example_profile
inspec exec https://username:token@github.com/private/example_profile
inspec exec https://username:password@webserver/private/example_profile
```
This also uses the Git fetcher when the URL ends in `.git`. Example:
```
git config credential.helper cache
git ls-remote https://github.com/private/example_profile.git
inspec exec https://github.com/private/example_profile.git
```
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add documentation for `inspec exec` usage
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add tests for Git fetcher and `inspec exec`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add `opts` to branch of Git fetcher resolve logic
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify Git example comments
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Force `parse_uri` to attempt a parse
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Allow add_test to accept negation
This will allow for negated tests to be generated with add_tests.
* Fix rubocop violation
* Add optional options hash
Signed-off-by: Rachel Rice <rrice@chef.io>
Methods like…
* `count()` return `Integer` values
* `boolean()` return `TrueClass`/`FalseClass` values
* `concat()` return `String` values
…but threw exceptions because those types weren't supported.
This adds support to the `xml` resource, and adds tests to verify some of those examples.
Signed-off-by: Mark Hughes <greenantdotcom@users.noreply.github.com>
* Failing functional test for RSpec should deprecation
* Configure RSpec to allow .should calls
* Remove cruft from test files where we needed to filter deprecation warning
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Fixes (some) ruby warnings related to functional tests
* Removes unneeded `Dir.tmpdir` from test
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* ✓ adds additional checks for vendored profiles
This PR adds additional checks to verify if:
- inspec.yml and inspec.lock dependencies are out-of-sync
- complains about a missing lock file if we have dependencies defined
* skip if legacy profile path is used
* Fix unit tests.
* Force static sha256 for lock files and protect from unnamed depends.
* Add vendor profiles for checks. Windows downloads with different sha256.
* Adding inspec init profile for GCP.
* Adding final newline, thanks rubocop.
* Ensure README headings are at the same level.
* Move OS-specific default profile to new location
* Enforce os-platform restriction on default profile template
* Use profile templates in subdirs.
* Updates to address PR feedback after rebasing from #3491.
* Alter test setup to properly use YAML
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Resource for a Windows Security Identifier (SID)
* Integration tests for security_identifier resource
* Address rubocop violations
* Improve security_identifier from PR feedback
* Update security_identifier tests
* Improve security_identifier unit tests
* Fix unit tests fpr security_identifier resource
* More security_identifier unit tests
* Add docs page for security_identifier resource
* Fix issues with documentation
* Improve docs
Link to Microsoft reference page, and use their term 'trustee' instead of 'entity' where applicable.
* Change exists to exist
* Test appveyor file changes.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add missing tests for groups resource, document members propery, and assorted fixes.
Update existing documentation for group resource.
Add documentation for groups resource.
Update group resource tests to test members property.
Change groups resource members property to have simple style. (this
ensures members is a single array)
remove deprecated have_gid propery.
change `if !` to `unless`
Remove early return from members method. This prevented members from
working correctly on any OS other than Windows.
Add missing tests for the groups resource.
remove tests for has_gid
Signed-off-by: Miah Johnson <miah@chia-pet.org>
* Fix comments
Signed-off-by: Jared Quick <jquick@chef.io>
* Allow strings or symbols to be used interchangeably in filtertable criteria; improve error message
* rubocop
* Update test count
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
