This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Per the [docs], MCFLY_FUZZY is no longer a boolean, taking now a
positive integer that controls the fuzziness factor.
[docs]: https://github.com/cantino/mcfly#fuzzy-searching
Co-authored-by: Robert Helgesson <robert@rycee.net>
mujmap is a tool that synchronizes mail between a mail server and
notmuch via JMAP. It's very similar to lieer, so I heavily based the
implementation of the notmuch module on lieer's. I did not include an
equivalent to lieer's periodic synchronization service, however,
because I plan to soon introduce a daemon mode to mujmap.
https://github.com/elizagamedev/mujmap
The user should always explicitly set the state version they wish to
use. Indeed, the configuration generated by the Home Manager install
script has set this option for a long time. This removal should
therefore not affect many users.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
Currently translated at 100.0% (14 of 14 strings)
Add translation using Weblate (Catalan)
Co-authored-by: Leix b <abone9999@gmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/ca/
Translation: Home Manager/Home Manager Modules
* Add flake.lock and clean up flake.nix
Add a lockfile to work around https://github.com/NixOS/nix/issues/6541
(and because it's a good idea anyway).
Also use flake-utils, and restrict ourselves to the five platforms
supported by nixpkgs. Otherwise, the IFD for nmd fails on weird
platforms. This fixes `nix flake check`.
Remove the redundant `apps` output, see https://github.com/nix-community/home-manager/pull/2442#issuecomment-1133670487
* nixos,nix-darwin: factor out into a common module
* nixos,nix-darwin: make `home-managers.users` shallowly visible
Make sure the option is included in the NixOS/nix-darwin manual (but the
HM submodule options aren't).
Also add a static description to the HM submodule type so that we don't need to
evaluate the submodules just to build the option manual. This makes
nixos-search able to index the home-manager flake.
Also clean up some TODOs.
* flake: add nmd and nmt
This avoids having to use `pkgs.fetchFromGitLab` in an IFD, which causes
issues when indexing packages with nixos-search because `pkgs` is
instantiated with every platform.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
M_SHARE is not a valid column on Darwin. It seems that previously htop
ignored unknown columns, but the current version does not display all
subsequent columns.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
- Change the example value of `gtk.theme.package` from
`pkgs.gnome.gnome_themes_standard` was an alias that was removed on 2022-01-13,
`pkgs.gnome-themes-extra`, which references the actual package.
- Change the example value of `gtk.icon.package` from `pkgs.adwaita-icon-theme` to
`pkgs.gnome.adwaita-icon-theme`, as this package is in the `gnome` package set.
* home.pointerCursor: init
The current architecture for cursor configurations is composed of individual
options for different backends. For example, X specific settings are managed under
`xsession.pointerCursor` and gtk specific settings are managed under `gtk.cursorTheme`.
While this architecture is modular, it causes duplication of similar structures for
each component. In theory, this provides flexibility because the components are independent
of each other which can be arranged in arbitrary ways to achieve the desired result.
However in practice, users wish to have one cursor theme applied to their entire system
The duplication of options correspond to duplication of settings on the user side and it
becomes a burden to keep track of all necessary settings.
This commit is an attempt to unify cursor configurations for different window systems and
GUI toolkits based on https://github.com/nix-community/home-manager/pull/2481#issuecomment-978917480.
`home.pointerCursor` is introduced as the interface for all cursor configurations.
It contain all options relevant to cursor themes with eneral options delcared under `home.pointerCursor.*`
and backend specific options declared under `home.pointerCursor.<backend>.*`. By default, a backend
independent configuration is generated. Backend specific configurations can be toggled via the
`home.pointerCursor.<backend>.enable` option for each backend. This was decided over using a
list of enums because it allows easy access to the state of the backend. Note generating different
cursor configurations for different backends is still possible by defining only `home.pointerCursor`
and managing the respective options manually.
* xcursor: migrate options to home.pointerCursor
- Removed `xession.pointerCursor` as x11 cursor configurations are now handled in `home.pointerCursor.x11`.
- Updated `meta.maintainer` field in `home.pointerCursor` and CODEOWNERS.
This module adds basic support for configuration specializations.
These allow the user to build multiple alternative configurations that
should be part of the same generation.
In esoteric setups, automatically setting GPG_TTY to current tty is not
desired on every shell startup. This change adds configuration options
to allow user to disable that if desired.
Neomutt will run the given command (which can be a string or a path)
and take the output from stdout and use it as the signature for your
email.
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
Without this the journal will be filled by
xscreensaver[468297]: sh: line 1: xscreensaver-command: command not found
xscreensaver-systemd: 12:29:22: exec: "xscreensaver-command -quiet -deactivate" exited with status 127
Constrain the pgrep command to only return results for the current user.
Additionally, quote the socket variables to prevent splitting.
Previously, if multiple users on a system were running `sway`, the
`pgrep` used in finding `swaySocket` would return multiple results. As a
result, reloads of sway would fail.
Fixes#2912.
This commit appends system-wide icon and pixmap directory and the icon
directory in the home-manager profile to the XCURSOR_PATH session variable
for the generic linux target. This is necessary because the default prefix
for libXcursor resolves to the Nix store which excludes the aforementioned
directories from being searched for cursor themes. [1]
[1] - https://github.com/nix-community/home-manager/pull/2891#issuecomment-1101064521.
This convenience function allows automatic assignment of a package's
associations to `xdg.mimeApps.defaultApplications`.
For example,
xdg.mimeApps.defaultApplications =
config.lib.xdg.mimeAssociations [ pkgs.gnome.evince ];
Co-authored-by: Ryan Trinkle <ryan@trinkle.org>
When processing `publicKeys` entries, handle entries that contain
multiple public keys (i.e. gpg --show-key returns multiple `pub`
lines) properly, setting the trust level for each key.
PR #2897
This makes it a lot easier to access the `pkgs` that would be used to
build the home configuration, e.g.
nix build ./dotfiles#homeConfigurations."user@host".pkgs.vim
This is useful as it allows access to a Nixpkgs that has been
instiantiated with config and overlays.
Removed by upstream since commit:
bcbc410c92
This commit is included since v9 release:
https://github.com/yshui/picom/releases/tag/v9https://github.com/yshui/picom/releases/tag/v9-rc1 (the actual changelog)
While this doesn't break the config per see, it results in the
following warning in the logs:
[ DD/MM/YYYY HH:MM:SS.mmm parse_config_libconfig WARN ] The
refresh-rate option has been deprecated. Please remove it from
your configuration file. If you encounter any problems without
this feature, please feel free to open a bug report
Beside the above change we also remove an old workaround and also
write the configuration file to a well-known location in the user's
home directory.
The code that is being evaled without the `--print-full-init` flag is
this:
```sh
__main() {
local major="${BASH_VERSINFO[0]}"
local minor="${BASH_VERSINFO[1]}"
if ((major > 4)) || { ((major == 4)) && ((minor >= 1)); }; then
source <(/nix/store/...-starship-1.3.0/bin/starship init bash --print-full-init)
else
source /dev/stdin <<<"$(/nix/store/...-starship-1.3.0/bin/starship init bash --print-full-init)"
fi
}
__main
unset -f __main
```
This code checks for bash version >= 4.1 , which has been released in
2009. Since this version is widely unavailable in nixpkgs, we can skip
one program invocation and directly call `starship init bash
--print-full-init`.
This is achieved by generating the Home Manager configuration
file as `~/.config/task/home-manager-taskrc`, and including that
file into ~/.config/task/taskrc.
Fixes#2360
Co-authored-by: mainrs <5113257+mainrs@users.noreply.github.com>
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
* systemd: fix creation of user service unit files
* helix: fix failing test due to file output format change
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
It can happen in some cases that home-manager first runs before gpg
creates its homedir, and it creates it with 755 permissions which the
user then needs to change by hand.
Do this in the module instead: before linking files, make sure the
homedir exists, and if it doesn't, create it with the right permissions.
Changed option types to `either str path` to allow using path values.
The related session variable is defined for the default and the extra
user directories now.
This makes definitions like
home.activation.foo = mkIf false "bar"
work, where previously they would complain about
`home.activation.foobar.data` being used but not defined.
The crucial part is that we don't call `convertAllToDags` in
`dagOf.merge`, because we need to process `mkIf`/`mkMerge` properties
first. So we let `attrEquivalent.merge` do its job normally, but give
it a type `dagEntryOf` that does the conversion.
Ideally this shouldn't require so much boilerplate; I'd like to
implement something like
types.changeInto dagContentType elemType dagEntryAnywhere
in Nixpkgs.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
