Mirrors/hacktricks
2
0
Fork 0
mirror of https://github.com/carlospolop/hacktricks synced 2024-11-22 12:43:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
hacktricks/physical-attacks/firmware-analysis/bootloader-testing.md
Carlos Polop 7aaa08ff92 a
2024-02-09 01:38:08 +01:00

4.5 KiB
Raw Blame History

Learn AWS hacking from zero to hero with htARTE (HackTricks AWS Red Team Expert)!

Other ways to support HackTricks:

The following steps are recommended for modifying device startup configurations and bootloaders like U-boot:

  1. Access Bootloader's Interpreter Shell:

    • During boot, press "0", space, or other identified "magic codes" to access the bootloader's interpreter shell.

  2. Modify Boot Arguments:

    • Execute the following commands to append 'init=/bin/sh' to the boot arguments, allowing execution of a shell command: %%% #printenv #setenv bootargs=console=ttyS0,115200 mem=63M root=/dev/mtdblock3 mtdparts=sflash: rootfstype= hasEeprom=0 5srst=0 init=/bin/sh #saveenv #boot %%%

  3. Setup TFTP Server:

    • Configure a TFTP server to load images over a local network: %%% #setenv ipaddr 192.168.2.2 #local IP of the device #setenv serverip 192.168.2.1 #TFTP server IP #saveenv #reset #ping 192.168.2.1 #check network access #tftp ${loadaddr} uImage-3.6.35 #loadaddr takes the address to load the file into and the filename of the image on the TFTP server %%%

  4. Utilize ubootwrite.py:

    • Use ubootwrite.py to write the U-boot image and push a modified firmware to gain root access.

  5. Check Debug Features:

    • Verify if debug features like verbose logging, loading arbitrary kernels, or booting from untrusted sources are enabled.

  6. Cautionary Hardware Interference:

    • Be cautious when connecting one pin to ground and interacting with SPI or NAND flash chips during the device boot-up sequence, particularly before the kernel decompresses. Consult the NAND flash chip's datasheet before shorting pins.

  7. Configure Rogue DHCP Server:

    • Set up a rogue DHCP server with malicious parameters for a device to ingest during a PXE boot. Utilize tools like Metasploit's (MSF) DHCP auxiliary server. Modify the 'FILENAME' parameter with command injection commands such as 'a";/bin/sh;#' to test input validation for device startup procedures.

Note: The steps involving physical interaction with device pins (*marked with asterisks) should be approached with extreme caution to avoid damaging the device.

References

Learn AWS hacking from zero to hero with htARTE (HackTricks AWS Red Team Expert)!

Other ways to support HackTricks: