This goes to a separate file because that makes option parsing easier
and allows profiling both at the same time.
The "normal" profile now contains only the profile data of the actual
run, which is much more useful - you can now profile a function by
running
fish -C 'source /path/to/thing' --profile /tmp/thefunction.prof -c 'thefunction'
and won't need to filter out extraneous information.
Expansion parses slices like "$PATH[1..2]", but so does "set" when assigning
"set PATH[1..2] . .". Commit be06f842a ("Allow to omit indices in index
range expansions") forgot the latter.
Just like OPOST this just breaks output for anything not prepared for
it. Fish itself might work with it (and #4505 recommends it), but external commands are broken.
You'll see output like
foo
⏎
from `echo foo`.
Fixes#4873.
Continuation of #7133.
If given a windows path like `F:\foo`, this currently ends up
assert()ing in path_normalize_for_cd.
Instead, since these paths violate a bunch of assumptions we make, we
reject them and fall back on getting $PWD via getcwd() (which should
give us a nice proper unixy path).
Fixes#7636.
This isn't tested because it would require a system where a windowsy
path passes paths_are_same_file, and on the unix systems we run our
tests that's impossible as far as I can tell?
This used to print a literal DEL character in the output for `bind`,
which wouldn't actually show up and made it hard to figure out what
the key was.
So we just escape it back to how we actually used it - `\x7f`.
Fixes#7631.
This sometimes fails on github actions with ASAN. I am assuming that's
because the ctrl-c happens *before* the process has had a chance to
start.
So we do what we do and increase the delay.
These are a foreground and a background color. Now I see the point in
not naming them "foreground_color" and "background_color", but at
least "fg" and "bg" should do, right?
Prior to this change, histories were immortal and allocated with either
unique_ptr or just leaked via new. But this can result in races in the
path detection test, as the destructor races with the pointer-captured
history. Switch to using shared_ptr.
A weird interaction between grouped short options and our weird option
parsing that puts unknown options back:
```
echo "-n foo"
```
would see the `-n`, turn off printing newlines, interpret the " " as
another grouped short option, see that there is no short option for
space and put the entire token back on the arguments pile.
So it would print "-n foo" *without a newline*.
Fix this by keeping an old state of the options around and reverting
it when putting options back.
The alternative is *probably* to forbid the " " short option in
wgetopt, then check if an option group contains it and error out, but
this should only really be a problem in `echo` because that is,
AFAICT, the only thing that puts the options back.
Fixes#7614
When adding a command to history, we first expand its arguments to see
if any arguments are paths which refer to files. If so, we will only
autosuggest that command from history if the files are still valid. For
example, if the user runs `rm ./file.txt` then we will remember that
`./file.txt` referred to a file, and then only autosuggest that if the file
is present again.
Prior to this change we only performed simple expansion relative to the
working directory. This change extends it to variables and tilde
expansion. For example we will now apply the same hinting for
`rm ~/file.txt`
Fixes#7582
This removes the 100 msec timeout from io_buffer_t. We no longer need to
periodically wake up to check if a command substitution is finished,
because we get explicitly poked when that happens.
io_buffer_t is used to buffer output from a command substitution, so we
can split it into arguments. Typically io_buffer_t reads from its pipe
until it gets EOF and then stops reading. However it may be that the
cmdsub ends but EOF is not delivered because the stdout of the cmdsub
escaped with a background process.
Prior to this change we would wake up every 100 msec (select timeout) to
check if the cmdsub is finished. However this 100 msec adds latency if a
background process is launched from e.g. fish_prompt.
Switch to the new poke() function. Now when the cmdsub is finished, it
pokes its item, which explicitly wakes it up. This removes the extra
latency.
Fixes#7559
In preparation for fixing #7559, add a function poke_item to fd_monitor.
fd_monitor has a list of file descriptors, and invokes a callback when an
fd becomes readable. With this change, we assign each item a unique ID and
return it when the item is added; the ID may then be used to invoke the
callback explicitly.
The idea is that we can stop reading from the pipe associated with the
cmdsub when the job is finished, even if the pipe is still open.
This allows for multiple edits to be undone/redone in one go, as if they
were one edit.
Useful when a function is editing the commandline buffer via scripted
changes or via a keybinding so the internal changes to the buffer can be
abstracted away.
(Having extreme difficulty getting pexpect to play nice with the concept
of undo/redo...)
Currently binding `exit` to a key checks too late that it's exitted,
so it leaves the shell hanging around until the user does an execute
or similar.
As I understand it, the `exit` builtin is supposed to only exit the
current "thread" (once that actually becomes a thing), and the
bindings would probably run in a dedicated one, so the simplest
solution here is to just add an `exit` bind function.
Fixes#7604.
Prior to this change, `fish_private_mode` worked by just suppressing
history outright. With this change, `fish_private_mode` can be toggled on
and off. Commands entered while `fish_private_mode` is set are stored but
in memory only; they are not written to disk.
Fixes#7590Fixes#7589
Commands that start with a space should not be written to the history
file. Prior to this change, that was implemented by simply not adding them
to history. Items with leading spaces were simply dropped.
With this change, we add a 'history_persistence_mode_t' to
history_item_t, which tracks how the item persists. Items with leading
spaces are now marked as "ephemeral": they can be recovered via up arrow,
until the user runs another command, or types a space and hits return.
This matches zsh's HIST_IGNORE_SPACE feature.
Fixes#1383
Don't go into implicit interactive mode without ever executing
anything - not even `exit` or reacting to ctrl-d. That just renders
the shell useless and unquittable.
It was always a bit ridiculous that argparse required `X-longflag` if
that "X" short flag was never actually used anywhere.
Since the short letter is for getopt's benefit, we can hack around
this with our old friend: Unicode Private Use Areas.
We have a counter, starting at 0xE000 and going to 0xF8FF, that counts
up for all options that don't have a short flag and provides one. This
gives us up to 6400 long-only options.
6.4K should be enough for everybody.
A mildly interesting one is the call to test_wchar2utf8 with a non-null
pointer ("u1"/"dst") but 0 length. In this case we relied on malloc(0)
returning non-null which is not guaranteed.
src/fish_tests.cpp:1619:23: warning: Call to 'malloc' has an allocation
size of 0 bytes [clang-analyzer-optin.portability.UnixAPI]
mem = (char *)malloc(dlen);
^
test_wchar2utf8(w1, sizeof(w1) / sizeof(*w1), u1, 0, 0, 0,
"invalid params, dst is not NULL");
Prior to this change, a glob like `**/file.txt` would only match
`file.txt` in subdirectories; the `**` must match at least one directory.
This is historical behavior.
With this change we move a little closer to bash's implementation by
allowing a literal `**` segment to match in the current directory. That
is, `**/foo` will match both `foo` and `bar/foo`, while `b**/foo` will
only match `bar/foo`.
Fixes#7222.
Before running a command, or before importing a command from bash history,
we perform error checking. As part of error checking we expand commands
including variables and globs. If the glob is very large, like `/**`, then
we could hang expanding it.
One fix would be to limit the amount of expansion from the glob, but
instead let's just not expand command globs when performing error checking.
Fixes#7407
If the user types something like `/**`, prior to this change we would
attempt to expand it in the background for both highlighting and
autosuggestions. This could thrash your disk and also consume a lot of
memory.
Add a a field to operation_context_t to allow specifying a limit, and add
a "default background" limit of 512 items.
Historically fish has not supported tab completing or autosuggesting
wildcards with **. Prior to this fix, we would test every file match,
discover the ** wildcard, and then ignore it. Instead look for **
wildcards at the top level.
This prevents autosuggesting with /** from chewing up your disk.
When a completion's "--arguments" script ran, it would clobber $status with its value,
so when you repainted your prompt, it would now show the completion
script's status rather than the status of what you last ran.
Solve this by just storing the status and restoring it - other places
do this by calling exec_subshell with apply_exit_status set to false,
which does basically the same thing. We can't use it here because we
don't want to run a "full" script, we only want the arguments to be
expanded, without a "real" command.
No, I have no idea how to test this automatically.
Fixes#7555.
This has one functional difference, in that we now report non-EACCESS
errors even for relative paths. I consider that to be a plus.
Some other sites might benefit from this, let's look into that later.
1. This should be using our wcstod_l on platforms where we need
it (for some reason it wasn't picking it up on FreeBSD?)
2. This purports to have a "fast path". I like fast paths.
Locale-wise, we're only interested in one thing:
"." is the radix character when interpreting numbers
And for that it's enough to just use our c-locale, like elsewhere.
This saves a bunch of switching locale back and forth, and simplifies
the code.
Prior to this change, the functions in exec.cpp would return true or false
and it was not clear what significance that value had.
Switch to an enum to make this more explicit. In particular we have the
idea of a "pipeline breaking" error which should us to skip processes
which have not yet launched; if no process launches then we can bail out
to a different path which avoids reaping processes.
This would tell you a function was "Defined in - @ line 1" for every
function defined via `source`.
Really, ideally we'd figure out where the *source* call was, but that'
much more complicated, so we just give a comprehensible message.
This matches what we do in --profile's output:
```
> source /home/alfa/.config/fish/config.fish
--> set -gx XDG_CACHE_HOME /home/alfa/.cache
--> set -gx XDG_CONFIG_HOME /home/alfa/.config
--> set -gx XDG_DATA_HOME /home/alfa/.local/share
```
instead of
```
+ source /home/alfa/.config/fish/config.fish
+++ set -gx XDG_CACHE_HOME /home/alfa/.cache
+++ set -gx XDG_CONFIG_HOME /home/alfa/.config
+++ set -gx XDG_DATA_HOME /home/alfa/.local/share
```
Prior to this change, if fish were launched connected to a tty but not as
pgroup leader, it would attempt to become pgroup leader only if
--interactive is explicitly passed. But bash will unconditionally attempt
to become pgroup leader if launched interactively. This can result in
scenarios where fish is running interactively but in another pgroup. The
most obvious impact is that control-C will result in the pgroup leader
(not fish) exiting and make fish orphaned.
Switch to matching the bash behavior here - we will always try to become
pgroup leader if interactive.
Fixes#7060.
And again clang-format does something I don't like:
- if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0) return found;
+ if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0)
+ return found;
I *know* this is a bit of a long line. I would still quite like having
no brace-less multi-line if *ever*. Either put the body on the same
line, or add braces.
Blergh
When globbing, we have a base directory (typically $PWD) and a path
component relative to that. As PWD is "virtual" it may be a symlink. Prior
to this change we would use wrealpath to resolve symlinks before opening
the directory during a glob, but this call to wrealpath consumed roughly
half of the time during globbing, and is conceptually unnecessary as
opendir will resolve symlinks for us.
Remove it. This may have funny effects if the user's PWD is an unlinked
directory, but it roughly doubles the speed of a glob like `echo ~/**`.
This adds the ability to limit how many expansions are produced. For
example if $big contains 10 items, and is Cartesian-expanded as
$big$big$big$big... 10 times, we would naviely get 10^10 = 10 billion
results, which fish can't actually handle. Implement this in
completion_receiver_t, which now can return false to indicate an overflow.
The initial expansion limit 'k_default_expansion_limit' is set as 512k
items. There's no way for users to change this at present.
This switches certain uses from just appending to a list to using
completion_receiver_t, in preparation for limiting how many completions
may be produced. Perhaps in time this could also be used for "streaming"
completions.
completion_receiver_t wraps a completion list; it will centralize logic
around adding completions and most importantly it will enforce that we
do not exceed our expansion limit.
The pager cleanup missed that the existing token could already include active (as in unescaped) expansions, and just escaped them all.
This means things like `ls ~/<TAB>` would escape the `~`, which is obviously wrong and makes it awkward to use.
This reverts commit b38a23a46d.
I fully expect that we'll try again, but there's no use in keeping master broken while that happens.
Fixes#7526.
E.g. if we do `string match -q`, and we find a match, nothing about
the input can change anything, so we quit early.
This is mainly useful for performance, but it also allows `string`
with `-q` to be used with infinite input (e.g. `yes`).
Alternative to #7495.
warn_unused_result is the persistent one that won't go away with a
simple `(void)write(...)` and needs to be assigned to a variable (that
must then also be declared unused or else you'll get a warning about
_that_).
"smartcase" performs case-insensitive matching if the input string is all
lowercase, and case-sensitive matching otherwise. When completing e.g.
files, we will now show both case sensitive and insensitive completions if
the input string does not contain uppercase characters.
This is a delicate fix in an interactive component with low test coverage.
It's likely something will regress here.
Fixes#3978
This is an attempt to simplfy some completion logic. It mainly refactors
reader_data_t::handle_completions such that all completions have the token
prepended; this attempts to simplify the logic since now all completions
replace the token. It also changes how the pager prefix works. Previously
the pager prefix was an extra string that was prepended to all
completions. In the new model the completions already have the prefix
prepended and the prefix is used only for certain width calculations.
This is a somewhat frightening change in an interactive component with
low test coverage. It tweaks things like how long completions are
ellipsized. Buckle in!
In preparation for introducing "smart case", refactor string fuzzy
matching. Specifically split out the case folding and match type into
separate fields, so that we can introduce more case folding types without
a combinatoric explosion.
This is used to decide which fuzzy match is better, however it is used
only in wildcard expansion and not in actual completion ranking or
anywhere else where it could matter. Try removing the compare() call
and implementation.
What compare() did specially was compare distances, e.g. it ranks
lib as better than libexec when expanding /u/l/b. But the tests did not
exercise this so it's hard to know if it's working. In preparation for a
refactoring, remove it.
When fish presents an autosuggestion, there is some logic around whether
to retain it or discard it as the user types "into" it. Prior to this
change, we would retain the autosuggestion if the user's input text is a
case-insensitive prefix of the autosuggestion. This is reasonable for
certain case-insensitive autosuggestions like files, but it is confusing
especially for history items, e.g. `git branch -d ...` and `git branch -D
...` should not be considered a match.
With this change, when we compute the autosuggestion we record whether it
is "icase", and that controls whether the autosuggestion permits a
case-insensitive extension.
This addresses part of #3978.
The code to override the `(status current-command) was present`, but not
handled in either the default `fish_title` function or the fallback.
Closes#7444.
Currently a bit limited, unfortunately printf's `%a` specifier is
absolutely unreadable.
So we add `hex` and `octal` with `0x` and `0` prefixes respectively,
and also take a number but currently only allow 16 and 8.
The output is truncated to integer, so scale values other than 0 are
invalid and 0 is implied.
The docs mention this may change.
Prior to this change, we would run fish_prompt and then afterwards set
the shell modes. For users with an initially slow prompt, this would
mean that characters would be echoed to the tty until after the prompt
completes.
Reorder these so that we set the tty mode first. This implies we will
run the prompt in shell mode, but this was already the case up until
2a3677b386.
Fixes#7489. Note that the prior commit e0cedd4ad2 is also necessary
here, as that fixed an extra prompt execution.
The new commandline switch `string match --regex --import` will import
as fish variables any named capture groups with the matched captures as
the value(s).
Previously this parameter was used to more-eagerly restore the terminal
mode. This was the basis for #2214. However now we restore the mode
from the reader instead, so we can remove this unused parameter.
Prior to this fix, when key binding is a script command (i.e. not a
readline command), fish would run that key binding using fish's shell
tty modes. Switch to using the external tty modes. This re-fixes
issue #2214.
Prior to this change, when a process resumes because it is brought back
to the foreground, we would reset the terminal attributes to shell mode.
This fixed#2114 but subtly introduced #7483.
This backs out 9fd9f70346, re-introducing #2114 and re-fixing #7483.
A followup fix will re-fix #2114; these are broken out separately for
bisecting purposes.
Fixes#7483.
Prior to this change, for bindings which have script commands, the
inputter would execute them directly. However an upcoming fix for #7483
will require more integration with the reader. Switch to a new model where
the reader passes in a function to use for executing script commands.
The string "%ls is %ls", which is printed when `type <command>` is ran
for a command in PATH, couldn't be localized, since it was missing _()
around it.
It may happen that the user types an abbreviation and then hits return.
Prior to this commit, we would perform a form of syntax highlighting
that does not require I/O, so as to not block the user. However this
could cause invalid commands to be colored as valid.
More generally if the user has e.g a slow NFS mount, then syntax
highlighting may lag behind the user's typing, and be incorrect at the
time the user hits return. This is an unavoidable race, since proper
syntax highlighting may take arbitrarily long.
Introduce a new function `finish_highlighting_before_exec`, which waits
for any outstanding syntax highlighting to complete, BUT has a timeout
(250 milliseconds). After this, it falls back to the no-I/O variant, which
colors all commands as valid and nothing as paths.
Fixes#7418Fixes#5912
In some cases the completion we come up with may be unexpected, e.g.
if you have files like
/etc/realfile
and
/etc/wrongfile
and enter "/etc/gile", it will accept "wrongfile" because "g" and
"ile" are in there - it's a substring insertion match.
The underlying cause was a typo, so it should be easy to go back.
So we do a bit of magic and let "cancel" undo, but only right after a
completion was accepted via complete or complete-and-search.
That means that just reflexively pressing escape would, by default, get you back to
the old token and let you fix your mistake.
We don't do this when the completion was accepted via the pager,
because 1. there's more of a chance to see the problem there and 2.
it's harder to redo in that case.
Fixes#7433.
This was typically overridden by "too many/few arguments", but it's
actually incorrect:
sin(55
has the correct number of arguments to `sin`, but it's lacking
the closing `)`.
fish_user_paths is a fish-specific variable that can be persisted by
making it a universal variable or by making it a global variable set at
startup in `config.fish`.
Since it is not defined in a clean installation, a user could
inadvertently create it as `set -Ux fish_user_paths ....` the first
time, creating a horrible, ugly, self-loathing mess that will have you
chasing ghosts and bisecting for naught once fish re-imports
fish_user_paths as a *global* variable that shadows the universal one.
While that is true for any universal variable that is re-imported as a
global variable, only fish_user_paths has the potential to really screw
things up because we also re-export PATH based off of its value in turn.
This fixes up the SIGIO notifier in preparation for using it on BSD. It
removes the reliance on the signal's si_code, which is not available in
BSD, and it properly handles the BSD behavior where SIGIO is delivered on
a read even if the read returns EAGAIN.
Fix an error caused by `exec_job()` assuming a job launched with the
intention of being backgrounded would have a pgid assigned in all cases,
without considering the status of `exec_error` which could have resulted
in the job failing before it was launched into its own process group.
Fixes (but doesn't close) #7423 - that can be closed if this assertion
failure doesn't happen in any released fish versions.
It is apparently possible to launch fish such that its pid owns the tty,
but its pid is in a different pgroup. In that case, do not attempt to stop
with SIGTTIN; instead simply attempt to place fish in its own pgroup.
Fixes#7388
`complete_param_expand` knows how to handle cases like `foo=br` so we
don't need to bother sending just the `br` part. Furthermore, sending
just `br` is incorrect because we will end up replacing the entirety of
`foo=br` with the result of the completion. That is, `foo=br` will be
replaced with `bar` instead of being completed to `foo=bar`.
This switch is no longer necessary when only one command is given.
Internally completions are stored separately for each command,
so we only every print one command name per "complete" line anyway.
On WSL1, fcntl(F_SETOWN) will fail and this would report an error.
Suppress this error message since it is not very interesting.
The effect is to disable real-time universal variable propagation.
Introduce a new strategy for notifying other fish processes of universal
variable changes, as a planned replacement for the complex
strategy_named_pipe. The new strategy still uses a named pipe, but instead
of select() on it, it arranges for SIGIO to be delivered when data is
available. If a SIGIO has been seen since the last check, it means the file
needs to be re-read.
When expanding a string, you may or may not want to generate
descriptions alongside the expanded string. Usually you don't want to
but descriptions were opt out. This commit makes them opt in.
If the padding is not divisible by the char's width without remainder,
we pad the remainder with spaces, so the total width of the output is correct.
Also add completions, changelog entry, adjust documentation, add examples
with emoji and some tests. Apply some minor style nitpicks and avoid extra
allocations of the input strings.
Improves on #7328.
I believe this is the correct behavior, simply skip all whitespace before
a word. Try with
./fish -C 'bind \ef forward-bigword; bind \eb backward-bigword; bind \ed kill-bigword; bind \cw backward-kill-bigword'
Also unrelated formatting fixes. I don't think a CI failure on unformatted
code is warranted but I wish it could do that behind the scenes.
For example "grep --color"<TAB> can complete to "grep --color=". Don't add
a space in this case; we do the same for arguments that end in =.
In GNU-style getopt, equal sign means that the flag has an argument. Without
the = it would not consume the next argument as opposed to Python's argparse.
This was a weird special behavior where we'd put the commandline on a
new line if it wrapped *and* the prompt was > 33% of the screen.
It seems to be more confusing than anything.
Fixes#5118.
Prior to this change, tab completing with a variable assignment like
`VAR=val cmd<tab>` would parse out and apply VAR=val, then recursively
invoke completions. This caused some awkwardness around the wrap chain -
if a wrapped command had a variable completion we risked infinite
recursion. A secondary problem is that we would run any command
substitutions inside variable assignment, which the user does not expect
to run until pressing enter.
With this change, we explicitly track variable assignments encountered
during tab completion, including both those explicitly given on the
command line and those found during wrap chain walk. We then apply them
while suppressing command substitutions.
In preparation for applying variable assignments (VAR=VAL cmd), separate
them out from the command when performing completions. This includes both
those that the user typed, and any that come about through
completion --wraps.
When completing and walking a wrap chain, we pass around a lot of
information. Factor this together into a new struct custom_arg_data_t
which reduces the number of parameters needed.
The "wrap chain" refers to a sequence of commands which wrap other
commands, for completion purposes. One possibility is that a wrap chain
will produce a combinatorial explosion or even an infinite loop, so there
needs to be logic to prevent that. Part of that logic is encapsulated in a
visited set (wrap_chain_visited_set_t) to prevent exploring the same item
twice.
Prior to this change, we stored pairs (command, wrapped_command). But we
only really need to store the wrapped command. Switch to that.
One consequence is that if a command wraps another command in more than
one way, we won't explore both ways. This seems unlikely in practice.
Detect recursive calls to builtin complete and the internal completion in
the same place.
In 0a0149cc2 (Prevent infinite recursion when completion wraps variable assignment)
we don't print an error when completing certain aliases like:
alias vim "A=B vim"
But we also gave no completions.
We could make this case work, but I think that trying to salvage situations
like this one is way too complex. Instead, let the user know by printing an
error. Not sure if the style of the error fits.
We could add some heuristic to alias to not add --wraps in some cyclic cases.
The lambda has grown way too big, and it was not easy to see what the inputs
and outputs are. We always use the same visitor, so the function parameter
is not necessary.
This reads any additional positional arguments given to `fish -c` into
$argv.
We don't handle the first argument specially (as `$0`) as that's confusing and
doesn't seem very useful.
Fixes#2314.
This allows
bind -k backspace suppress-autosuggestion or backward-delete-char
To remove the suggestion on the first press and then delete
chars.
Note: This requires that we then don't reenable suggestions
immediately afterwards. Currently we don't after deletion.
Fixes#1419.
This makes history searches case-insensitive, unless the search string
contains an uppercase character.
This is what vim calls "smartcase".
Fixes#7273.
Closes#7344
Apply a targeted fix to the place where complete() is called to handle nested
variable assignments. Sadly, reporting an error is probably not okay here,
because people might legitimately use aliases like:
alias vim "A=B command vim"
This is all a bit ugly, and I hope to find a cleaner solution. Supporting
completions on commandlines like `x=$PWD cd $x/ ` is a nice feature but it
comes with some complexity.
This is too important to not be one.
For one if it couldn't be loaded for any reason it would
break a lot of fish scripts.
Also this is faster by ~20x.
Fixes#7342
4f0ade7a73 broke the tests when LANG was
C, so the MB_CUR_MAX==1 path wasn't working.
Seemingly that cast is doing some work here?
Just revert that bit for now, since this path is unimportant
anyway (please, please, please, please use a unicode capable locale).
This is a reimplementation of the "vectorized" ASCII detection
from str2wcs_internal. This handles the case where only part of
a string is ASCII. It also avoids pointer overflow issues and improves
commenting.
Prior to this change, str2wcs_internal had an optimization for ASCII
inputs. However the main cost was the repeated bounds checks when
performing push_back() on the resulting wcstring.
Switch to determining the number of ASCII characters, and then appending
those all in one go. This improves the time in the 'convert_ascii' test
from ~450 usec to ~75 usec.
When pressing tab repeatedly, completions only computed on the first one. This
is because the old logic assumed that completions are present if the last
key was tab. Recompute them if there are no completions at all.
Fixes#6863
Since builtins don't actually have the streams connected, but instead
read input via the io_streams_t objects, this would just always say
what *fish's* fds were.
Instead, pass along some of the stream data to check those
specifically - nobody cares that `test`s fd 0 *technically* is stdin.
What they want to know is that, if they used another program in that
place, it would connect to the TTY.
This is pretty hacky - I abused static variables for this, but
since it's two bools and an int it's probably okay.
See #1228.
Fixes#4766.
(regression from d415350aaf)
This is important especially in e.g. the new Windows Terminal, because
for some reason that lets the tab stick around if the process exited
with a non-zero status.
Will add tests as soon as I figure out how.
Taken from GNU realpath, this one makes realpath not resolve symlinks.
It still makes paths absolute and handles duplicate and trailing
slashes.
(useful in fish_add_path)
With a commandline like
```
a b c d
```
and the cursor at the beginning, this would eat "a b", which isn't a
sensible bigword.
Bigword should be "a word, with optional leading whitespace".
This was caused by an overly zealous state-machine that always ate one
char and only *then* started eating leading whitespace.
Instead eat *a character*, and if it was whitespace go on eating
whitespace, and if it was a printable go straight to only eating
printables.
Fixes#7325.
This can easily lead to an infinite loop, if a variable handler
triggers a repaint and the variable is set in the prompt, e.g. some of
the git variables.
A simple way to reproduce:
function fish_mode_prompt
commandline -f repaint
end
Repainting executes the mode prompt, which triggers a repaint, which
triggers the mode prompt, ....
So we just set a flag and check it.
Fixes#7324.
Currently, completions have to be specified like
```fish
complete -c foo -l opt
```
while
```fish
complete foo -l opt
```
just complains about there being too many arguments.
That's kinda useless, so we just assume if there is one left-over
argument that it's meant to be the command.
Theoretically we could also use *all* the arguments as commands to
complete, but that seems unlikely to be what the user wants.
(I don't think multi-command completions really happen)
Currently only `complete` will list completions, and it will list all
of them.
That's a bit ridiculous, especially since `complete -c foo` just does nothing.
So just make `complete -c foo` list all the completions for `foo`.
Found with gcc's -Wmissing-declarations which gives warnings like
../src/tinyexpr.cpp:61:5: warning: no previous declaration for ‘int get_arity(int)’ [-Wmissing-declarations]
61 | int get_arity(const int type) {
The same warnings show up for builtin functions like builtin_bg because they
currently don't include their own headers. I left that.
Also reformat the touched files.
So we can do something on every edit, for example repaint the pager (#7318).
This patch fixes pager refiltering and repainting when pressing Control+U
after typing something in the search field.
Implement this by moving the convenience functions from editable_line_t to
the reader, so we have fewer places where we need to refilter. Essentially we
only have two cases: insertions at the cursor are handled by insert_string(),
and all others go through push_edit(). This should also make it clearer
where we update undo_history.may_coalesce.
This commit was on the history-search-edit-needle branch, so it should
work fine. I hope it does play well with some recent changes.
In 6d339df61 (Factor repainting decions from readline commands better
in the reader), insert_string() was simplified a lot, mirror that.
The tests for editable_line_t are not that useful anymore since the caller has
to decide whether to coalesce insertions, but I guess they don't hurt either.
We should have more tests for some interactive scenarios like undo and the
pager filtering.
This was broken in 6d339df612, when we removed
the normal repainting logic.
The pager *search* however needs to trigger a refilter, and therefore
needs to trigger after every insert/removal.
Fixes#7318
This avoids the heavy hit of __gconv_transform_utf8_internal.
In the worst case, after `is_ascii` returns the string is guaranteed to
be in the CPU cache (assuming realistic input sizes). In the best (and
hopefully extremely common) case, the conversion table lookups are
completely avoided.
In terms of real world gains, simply calling `history` is anywhere from
2x to 3x faster for large history files composed of mostly ascii
content under glibc 2.31 on AMD64.
Previously, when a command wasn't found, fish would emit the
"fish_command_not_found" *event*.
This was annoying as it was hard to override (the code ended up
checking for a function called `__fish_command_not_found_handler`
anyway!), the setup was ugly,
and it's useless - there is no use case for multiple command-not-found handlers.
Instead, let's just call a function `fish_command_not_found` if it
exists, or print the default message otherwise.
The event is completely removed, but because a missing event is not an error
(MEISNAE in C++-speak) this isn't an issue.
Note that, for backwards-compatibility, we still keep the default
handler function around even tho the new one is hard-coded in C++.
Also, if we detect a previous handler, the new handler just calls it.
This way, the backwards-compatible way to install a custom handler is:
```fish
function __fish_command_not_found_handler --on-event fish_command_not_found
# do a little dance, make a little love, get down tonight
end
```
and the new hotness is
```fish
function fish_command_not_found
# do the thing
end
```
Fixes#7293.
It was possible though unlikely for make_autoclose_pipes to close only
one side of pipe, if it fails to find a new fd. This would result in an
fd leak. Ensure that doesn't happen.
On BSDs, anonymous semaphores are implemented using a file descriptor
which is not marked CLOEXEC, so it gets leaked into child processes.
Use ordinary pipes instead of semaphores everywhere except Linux.
Fixes#7304
Now command, jobs, type, abbr, builtin, functions and set take `-q` to
query for existence, but the long option is inconsistent.
The first three use `--quiet`, the latter use `--query`. Add `--query`
to the first three, but keep `--quiet` around.
Fixes#7276.
This concerns how "internal job groups" know to stop executing when an
external command receives a "cancel signal" (SIGINT or SIGQUIT). For
example:
while true
sleep 1
end
The intent is that if any 'sleep' exits from a cancel signal, then so would
the while loop. This is why you can hit control-C to end the loop even
if the SIGINT is delivered to sleep and not fish.
Here the 'while' loop is considered an "internal job group" (no separate
pgid, bash would not fork) while each 'sleep' is a separate external
command with its own job group, pgroup, etc. Prior to this change, after
running each 'sleep', parse_execution_context_t would check to see if its
exit status was a cancel signal, and if so, stash it into an int that the
cancel checker would check. But this became unwieldy: now there were three
sources of cancellation signals (that int, the job group, and fish itself).
Introduce the notion of a "cancellation group" which is a set of job
groups that should cancel together. Even though the while loop and sleep
are in different job groups, they are in the same cancellation group. When
any job gets a SIGINT or SIGQUIT, it marks that signal in its cancellation
group, which prevents running new jobs in that group.
This reduces the number of signals to check from 3 to 2; eventually we can
teach cancellation groups how to check fish's own signals and then it will
just be 1.
The 'time' prefix may come about either because the job itself is marked
with time, or because of the "inside out" weirdness of 'not time...'.
Factor this logic together and precompute it for a job.
This would only check for fish_right_prompt at startup, so if one
wasn't defined then it would never accept one.
The "config" here is just the *name* of the function (which we never
change, so it wouldn't really be necessary, but whatever).
The one exception is the breakpoint, in those we don't run the right
prompt.
Fixes#7302.
This allows us to send proper debug messages via FLOG, and it removes
more things from share/config.fish.
Note that the logic differs in some subtle ways. For instance it will
now obey $COLORTERM, so if that isn't "truecolor" or "24bit" it will
deactivate truecolor.
This adds a new type 'exit_state_t' which encapsulates where fish is in
the process of exiting. This makes it explicit when fish wants to cancel
"ordinary" fish script but still run exit handlers.
There should be no user-visible behavior change here; this is just
refactoring in preparation for the next commit.
The line offset of a trailing newline on the commandline was computed incorrectly.
As a result, up-arrow did not work for a commandline like the one inserted by:
commandline -i echo '' ''
Note this and the previous commit in the changelog.
Enter a multiline commandline, for example using
commandline -i echo echo
And press down-arrow. This will start a new history search which fails.
Then press up-arrow. I expect the cursor to move up, however, because we
are still in history search mode, up-or-search will search instead of moving
the cursor. Correct that by stopping history searches that don't have any results.
Just as `math "bitand(5,3)"` and `math "bitor(6,2)"`.
These cast to long long before doing their thing,
so they truncate to an integer, producing weird results with floats.
That's to be expected because float representation is *very*
different, and performing bitwise operations on floats feels quite useless.
Fixes#7281.
Prior to this change, if we saw more than one repaint readline command in
a row, we would try to ignore the second one. However this was never the
right thing to do since sometimes we really do need to repaint twice in a
row (e.g. the user hits Ctrl+L twice). Previously we were saved by the
buginess of this mechanism but with the repainting refactoring we see
missing redraws.
Remove the coalescing logic and add a test. Fixes#7280.
If you expand an abbreviation by executing the command, fish uses a
synchronous mode of syntax highlighting that performs no I/O, because we
want to highlight the abbreviation but don't know if it's valid or not
without doing I/O. However we were doing this too aggressively, after
every command regardless of whether it contained an abbreviation. Only
do this for commands with abbreviations.
When typing into the command line, some actions should trigger repainting,
others should kick off syntax highlighting or autosuggestions, etc. Prior
to this change, these were all triggered in an ad-hoc manner. Each
possible
This change centralizes the logic around repainting. After each readline
command or text change, we compute the difference between what we would
draw and what was last drawn, and use that to decide whether to repaint
the screen.
This is a fairly involved change. Bugs here would show up as failing to
redraw, not reacting to a keypress, etc. However it better factors the
readline command handling from the drawing.
With the prior commit, the topic_monitor only writes to the pipe if a
thread is known to be waiting. This is effectively a binary semaphore, and
on systems that support anon semaphores (yes Linux, but not Mac) we can use
them. These are more efficient than self-pipes.
We add a binary_semaphore_t class which uses sem_t if sem_init succeeds,
and a self-pipe if it fails.
On Linux the seq_echo benchmark (run 1024 times) goes from 12.40 seconds to
11.59 seconds, about an 11% improvement.
The topic monitor is what allows a thread to wait for any of a set of
events. Events are identified by a bit in a "pending update" mask. Prior to
this fix, post() would atomically set the bit, and if it was newly set,
announce the change by unconditionally writing to a self-pipe. Threads
could wait for new posts by reading from the pipe.
This is less efficient than it could be; in particular if no thread is
waiting on the pipe, then the write() is unnecessary. This slows down our
signal handler.
Change the design in the following way: if a thread is committed to
waiting, then it atomically sets the "pending update" mask (now just called
status) to a sentinel value STATUS_NEEDS_WAKEUP. Then post() will only
write to the self-pipe if it sees that there is a thread waiting. This
reduces the number of syscalls.
The total effect is hardly noticeable (usually there is a thread waiting)
but it will be important for the next commit.
It could be nice to use a heuristic for this in future, but for now let's
stick to the old behavior so we can keep formatting scripts without occasional
bad formatting changes.
A heuristic could also be used to break lines after |, && or || but I don't
think there is much need for that at the moment.
Closes#7252
We weren't correctly updating the internal exit generation value. This
meant that if one internal process exits, every other internal process
that has not exited will continually check, leading to 100% CPU usage.
I think this mainly affects concurrent mode, but it may be reproducible
if you have a command which refuses to consume its input.
Prior to this fix, the `exit` command would set a global variable in the
reader, which parse_execution would check. However in concurrent mode you
may have multiple scripts being sourced at once, and 'exit' should only
apply to the current script.
Switch to using a variable in the parser's libdata instead.
This concerns code like the following:
while true ; sleep 100; end
Here 'while' is a "simple block execution" and does not create a new job,
or get a pgid. Each 'sleep' however is an external command execution, and
is treated as a distinct job. (bash is the same way). So `while` and
`sleep` are always in different job groups.
The problem comes about if 'sleep' is cancelled through SIGINT or SIGQUIT.
Prior to 2a4c545b21, if *any* process got a SIGINT or SIGQUIT, then fish
would mark a global "stop executing" variable. This obviously prevents
background execution of fish functions.
In 2a4c545b21, this was changed so only the job's group gets marked as
cancelled. However in the case of one job group spawning another, we
weren't propagating the signal.
This adds a signal to parse_execution_context which the parser checks after
execution. It's not ideal since now we have three different places where
signals can be recorded. However it fixes this regression which is too
important to leave unfixed for long.
Fixes#7259
This used to be used to determine which token contained the cursor, so
as to highlight potential paths. But now we highlight all potential paths,
so we can remove the field.
In practice we didn't use the cache for anything. Always compute it on
demand.
This eliminates the 'indents' variable which had to be manually kept in
sync with the command line.
Also return the number of failed files.
I decided to *just* print the filenames (newline-separated because
NULLs are annoying here) to make it easier to deal with.
See #7251.
This indents continuations after pipes and conjunctions if they contain
a newline.
Example:
cmd1 &&
cmd2
But it avoids the "double indent" if it indented unconditionally:
cmd1 | begin
cmd2
end
More work towards improving #7252
Prior to this change, when emitting gap text (comments, newlines, etc),
fish_indent would use the indentation of the text at the end of the gap.
But this has the wrong result for this case:
begin
command
# comment
end
as the comment would get the indent of the 'end'. Instead use the indent
computed for the gap text itself.
Addresses one case of #7252.
The ternary expression was causing the list of paths (e.g.
$fish_function_path) to be copied. Avoid that copy with an if statement.
This reduces the time spent in try_autoload from 2.4 sec to 961ms on
the seq_echo benchmark run 1024 times, about 5% improvement.
Oh, C++...
The topic monitor allows a client to wait for multiple events, e.g. sigchld
or an internal process exit. Prior to this change a client had to specify
the list of generations and the list of topics they are interested in.
Simplify this to just the list of generations, with a max-value generation
meaning the topic is not interesting.
Also remove the use of enum_set and enum_array, it was too complex for what
it offered.
This can be used to determine whether the previous command produced a real status, or just carried over the status from the command before it. Backgrounded commands and variable assignments will not increment status_generation, all other commands will.
This pulls in widechar_width.h from commit 7e9dfdaf05059b3f. The big change
here is that some characters which were previously marked as widened in 9
are now marked as unconditionally narrow; this includes some randoms like
hot pepper (U+1F336) but more importantly all of the regional indicators,
which affects how flags are rendered.
If you put two regional indicators together, you get a flag emoji. It's
unclear what the width of this flag emoji should be; Terminal and iTerm2
renders it as width 1, while kitty renders it as width 2. This is
unaffected by fish_emoji_width because the flag does not have an assigned
codepoint, it is a pair of codepoints.
The regional indicators are marked as "neutral" in EastAsianWidth.txt which
means they conceptually have width 1. So two of them have width 2. So now
we assume that flags are rendered as width 2.
This fixes#7237, for terminals that render flags as width 2 (but not 1,
unfortunately, which includes iTerm2 and Terminal.app).
This pulls in widechar_width.h from commit d4e75d5bb1930291223d1.
This is a "rebuild with latest data" before we attempt a risky bugfix.
The idea here is that bisecting can separate whether any regression is
due to using the latest Unicode data, or the bug fix.
Prior to this change, fish would "resolve" highlight specs to rgb colors
right before use. This requires a series of variable lookups; profiling
showed 30% of draw time was spent here.
Switch to caching these (within a single redraw only).
Have the reader accept a constant configuration object, which controls
whether autosuggestions, etc. are enabled. These things don't change
dynamically.
fish_color_match is a variable which controls syntax highlighting for
matching quotes and parens, but only with interactive `read` with shell
highlighting disabled. It seems unlikely that anybody cares about this.
In principle this would allow 'string split' or whatever to output to
stderr and not lose the item separation. In practice this is not used
but it fixes a TODO.
builtins output to stdout and stderr via io_streams_t. Prior to this fix, it
contained an output_stream_t which just wraps a buffer. So all builtin output
went to this buffer (except for eval).
Switch output_stream_t to become a new abstract class which can output to a
buffer, file descriptor, or nowhere. This allows for example `string` to stream
its output as it is produced, instead of buffering it.
In commit fd6d814ea4, read_blocked was changed to read until EOF
or the full amount requested is returned. Switch this to returning
as soon as any data is available, which was the behavior prior to
fd6d814ea4.
This will allow builtin_string to output data in a "streaming"
fashion instead of needing to read a large block up-front.
Prior to this fix, if you invoked fish with --private and then used
`read --silent` to read something sensitive, the variable would be
stored in history, with the plain text available through up-arrow.
Fix it to not store items in silent mode.
Note the item was never written to disk; it was only stored in memory.
Fixes#7230
This is like wcs2string, but instead of returning a std::string, it invokes
a user-supplied function with each converted character.
The idea is to allow interleaved conversion and output.
This moves us slightly closer towards fish code in the background. The idea is
that a background job may still have "foreground" sub-jobs, example:
begin ; sleep 5 ; end &
The begin/end job runs in the background but should wait for `sleep`.
Prior to this fix, fish would see the overall job group is in the background
and not wait for any of its processes. With this change we detach waiting from
is_foreground.
This changes how fish attempts to protect itself from calling tcsetpgrp() too
aggressively. Recall that tcsetpgrp() will "force" itself, if SIGTTOU is
ignored (which it is in fish when job control is enabled).
Prior to this fix, we avoided SIGTTINs by only transferring the tty ownership
if fish was already the owner. This dated from a time before we had really
nailed down how pgroups should be assigned. Now we more deliberately assign a
job's pgroup so we don't need this conservative check.
However we still need logic to avoid transferring the tty if fish is not the
owner. The bad case is when job control is enabled while fish is running in the
background - here fish would transfer the tty and "steal" from the foreground
process.
So retain the checks of the current tty owner but migrate them to the point of
calling tcsetpgrp() itself.
add_disowned_pgid skipped jobs that have a PGID equal to the running
process. However, this includes processes started in config.fish or when
job control is turned off, so they never get waited on.
Instead, refactor this function to add_disowned_job, and add either the PGID or
all the PIDs of the job to the list of disowned PIDs/PGIDs.
Fixes#7183.
This is a set of miscellaneous cleanup for profiling.
An errant newline has been removed from 'if' statement output, which got
introduced with the new ast.
Switch from storing unique_ptr to a deque, which allocates less.
Collapse "parse" and "exec" times into just a single value "duration". The
"parse" time no longer makes sense, as we now parse ahead of time.
The prefix has already been case-corrected at this point and the remaining
completions are for the suffix only.
Fixes#7211
Introduced in
28d67c8f Show completion list on Tab also if a common prefix was inserted
These are events that have been queued but not yet fired. There's no
reason to modify the events after creating them. Mark them as const
to ensure that doesn't happen.
Assigning the tty is really a function of a job group, not an individual
job. Reflect that in terminal_maybe_give_to_job_group and also
terminal_return_from_job_group.
In practice this means that, if fish ever gets multiple variable stacks,
we will only incorporate environment variable changes from other fish
instances on the "main thread."
This reverts commit 3a5585df95.
This reverts a change that removed a lock. It's indeed true that in master,
fish script is bound to the main thread. But I'm working to remove that
limitation and these locks are important in that future.
When switching to the new ast, commands that were not decorated
statements (like function declarations) would be rejected from
autosuggestion validation because we could not find a command. Stop
rejecting them.
The owning locks were added after the original code and decorated with
comments indicating they are thread-safe, even though they're only ever
used from the main thread. Presuming the intent was to make future
manipulation of the code safer rather than to actually make use of any
thread safety guarantees, these have been wrapped in a new
`thread_exclusive` type which always calls ASSERT_IS_MAIN_THREAD.
The benefit is that this does not perform a syscall to lock a mutex
each time the variables are accessed.
When executed interactively and not piped, `functions` adds a comma as a
separator between each result. This removes the separator after the last
item.
highlight.cpp was blindly calling path_get_path for each head command
typed at the prompt which triggers a lot of syscalls via waccess.
It's still going to do that while commands are being composed, but now
it won't if we can make a cheap lookup to the builtins/functions hash
table and can determine that it's a valid command before inspecting the
filesystem.
When fish receives a "cancellation inducing" signal (SIGINT in particular)
it has to unwind execution - for example while loops or whatever else that
is executing. There are two ways this may come about:
1. The fish process received the signal
2. A child process received the signal
An example of the second case is:
some_command | some_function
Here `some_command` is the tty owner and so will receive control-C, but
then fish has to cancel function execution.
Prior to this change, these were handled uniformly: both would just set a
cancellation signal inside the parser. However in the future we will have
multiple parsers and it may not be obvious which one to set the flag in.
So instead distinguish these cases: if a process receives SIGINT we mark
the signal in its job group, and if fish receives it we set a global
variable.
We were previously aborting the main event loop before calling fish_exit
in the event of a SIGHUP. This patch causes the SIGHUP to be stored in a
separate state variable from a regular "must exit" condition so the
associated event can be fired before we terminate the loop.
All streams are redirected before the event is called to prevent a
SIGTTIN/SIGTTOU due to the user script reading/writing from a disposed
tty.
Closes#7014
This error only happens on recent versions of gcc, see previous
commit e6bb7fc973 for more info.
Instead of using `ignore_result()` here, I've added a `system_assert`
function/macro that mimics the behavior of all the other `system()`
calls in the file.
Previously fish weak-linked wcsdup, wcsncasecmp, and wcscasecmp.
This enabled fish to be used on 10.6. However the minimum Mac version
is now 10.9, where these symbols are available.
This reworks the "a=" detection to be simpler.
If we detect a variable assignment that produces an error,
simply consume it.
We also take the opportunity to not highlight it as an error,
and add some tests.
Original commit is 1ca05d32d3.
Typing that command in an interactive prompt would make the highlighter thread
eat up CPU and memory. Probably not the right fix; I think the token should
already have been consumed when the error is detected, then there is no need
to consume it when unwinding.
When selectiong a large completion entry in the pager, it would clobber the
prompt. To reproduce, first run this command
complete -c : -xa '(
# completion entries that, when applied to the commandline
# need one, two, or three lines respectively
echo 1
echo 2(string repeat -n (math $COLUMNS - 5) x)
echo 3(string repeat -n $COLUMNS x)
printf %s\n n(seq $LINES)
)'
then type ": " and hit Tab repeatedly. When cycling through completion
entries, observe that fish always tries to render the pager with the same
size, even though the number of lines occupied by the command line buffer
changes due to soft wrapping.
Fix this by rendering the pager after the command line has been rendered, so
we know how many lines we have left.
This switches fish_indent from parsing with parse_tree
to the new ast.
This is the most difficult transition because the new ast retains less
lexical information than the old parse tree. The strategy is:
1. Use parse_util_compute_indents to compute indenting for each token.
2. Compute the "gap text" between the text of significant tokens. This
contains whitespace, comments, etc.
3. "Fix up" the gap text while leaving the significant tokens alone.
This switches parse_util_compute_indents from parsing with parse_tree to
the new ast.
It also reworks the parse_util_compute_indents tests, because
parse_util_compute_indents will be the backing for fish_indent.
This is the first commit of a series intended to replace the existing
"parse tree" machinery. It adds a new abstract syntax tree and uses a more
normal recursive descent parser.
Initially there are no users of the new ast. The following commits will
replace parse_tree -> ast for all usages.
Prior to this commit, fish used NUL ('\0') to disable control
functions (for example, the function that generates SIGTSTP).
However NUL may in fact be bindable and is on macOS via
control-space.
Use instead _POSIX_VDISABLE if defined and not -1.
This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Page-Down seems to deactivate history search, so trying to undo
would leave the command line in an inconsistent state.
Fixes#7162 which was introduced in
12a9cb29 Fix assertion failure on page up / page down
It is used exclusively as vector at the moment since we only ever append
at the end. Making it a deque would be useful when allowing to edit the
search string and subsequently resume the search at an arbitrary position
in the history.
When editing a multiline command line and pressing "up" with the cursor at the
first line, fish attempts a hsitory search. If the search fails, don't move
the cursor to the end of the multiline command because this can be annoying
when the user does not actually want to perform a history search.
After profiling bottlenecks in job execution, the calls to `tcgetpgrp`
were identified to take a good amount of the execution time. Collecting
metrics on which branches were taken revealed that in all "normal"
cases, there is no benefit to calling `tcgetpgrp` before calling
`tcsetpgrp` as it can instead be called only in the error case to
determine what sort of error handling behavior should be applied.
This makes the best-case scenario of a single syscall much more likely
than in the previous situation.
Profiling revealed string comparison in variable lookups to be a
significant hotspot. This change causes `make test` to complete ~4.5%
faster per `hyperfine`.
This was originally comparing two pointers for equality but after the
refactor to wcstring it ended up comparing a const string pointer to the
_contents_ of the wcstring.
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
This makes binding \cz possible.
We already ignore the SIGTSTP signal it sends, so until now it was useless.
(also STOP and START for good measure, but since we disable flow
control in fish anyway these already shouldn't have been sent)
Fixes#7152
Profiling shows that parsing color names still took much longer than it
should.
wcscasecmp is so slow that using it directly causes `try_parse_special`
to consume up to 3% of all of fish's cpu time due to extremely
inefficient invariant case lookups for wide characters (tested: Fedora
Server 32 w/ glibc 2.31 with -O2).
These control the disambiguation between ctrl-j and ctrl-m.
This can cause the enter key to send a ctrl-m, which programs might be
unprepared for.
(This is why you need to do `stty sane<ctrl-j>`)
The `reserve` here can, under certain circumstances, reserve more than
strictly needed.
The simple workaround is to just never look at more than we feed in.
(really what we'd *want* is to look at the length of the *color
names*, but those are wchar, so length lookup is crappy NULL-lookup)
This was profiled to be a hotspot during startup. The usage of
wcscasecmp in a loop caused repeated transforms to lowercase, which is
incredibly slow for wide characters.
This makes it possible to expand the signals checked by the type. I can't merge
the sigttin fixes for #7060 yet because they introduce new breakage, but this
will make merging any future fix easier.
In #7133, neovim crashing caused "OPOST" to be turned off, which
caused a weird staircase display.
So we just force a set of settings that don't seem useful to change to
avoid breaking the terminal with something like that.
Fixes#7133.
A broken/missing optspec or `--` is a bug in the script using
argparse, an unknown option or invalid argument is a bug in using that script.
So in the former case print a stacktrace, because the person writing
the `argparse` call is at fault, in the latter don't.
Fixes#6703.
Prior to this change, the posix_spawn code paths used a fair amount of
manual management around its allocated structures (attrs and file actions).
Encapsulate this into a new class that manages memory management and error
handling.
Finish the transition to termsize.h. Remove the scary termsize bits
from common.cpp, which can throw off events at arbitrary calls and are
dangerously reentrant. Migrate everyone to the new termsize.h.
fish's handling of terminal sizes is currently rather twisted. The
essential problem is that the terminal size may change at any point from a
SIGWINCH, and common_get_{width,height} may modify it and post variable
change events from arbitrary locations.
Tighten up the semantics. Assign responsibility for managing the tty size
to a new class, `termsize_container_t`. Rationalize locking and reentrancy.
Explicitly nail down the relationship between $COLUMNS/$LINES and the tty
size. The new semantics are: whatever changed most recently takes
precendence.
Prior to this fix, fish would attempt to resize the terminal via
TIOCSWINSZ, which was added as part of #3740. In practice this probably
never did anything useful since generally only the tty master can use
this. Remove the support and note it in the changelog.
Prior to this fix, s_reset would attempt to reset the screen, optionally
using the PROMPT_SP hack to go to the next line. This in turn required
passing in the screen width even if it wasn't needed (because we were
not going to abandon the line). Factor this into two functions:
- s_reset_line which does not apply the hack
- s_reset_abandoning_line which applies the PROMPT_SP hack
common_get_width will "lazily" decide the screen width, which means
changing the environment variable stack. This is a surprising thing
to do from the middle of screen rendering.
Switch to passing in widths explicitly to screen.
The removed comparison ({begin,end,field} == INT_MIN) always evaluates
to false, because at this point in evaluation, `begin <= 0` has already
been evaluated to be false. Since INT_MIN <= 0, the second conditional
in all three of the affected cases is always false. The C++ standard
seems to guarantee left-to-right evaluation of logical operators, but
not necessarily bitwise operators.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
We are 1-indexed, and so it's weird to have `test` count its arguments
from 0.
For `test 1 =` this changes the error from
test: Missing argument at index 2
1 =
^
to
test: Missing argument at index 3
1 =
^
test loves error messages like
test: Missing argument at index 2
without explaining where that "index 2" is.
So now, we print the arguments below that, with a caret pointing to
the place where the error occured.
For example:
> test 1 = 2 and echo true or echo false
test: Expected a combining operator like '-a' at index 3
1 = 2 and echo true or echo false
^
(Type 'help test' for related documentation)
Fixes#6030.
There's a terrible number of fishscripts that start with
set path (dirname (status filename))
And that's really just a bit boring.
So let's let it be
set path (status dirname)
This change is necessary to fix dynamic titles for the Alacritty
terminal. We do this by simply adding the (wchar_t *) literal
L"alacritty" to the end of the title_terms array. This variable is
ultimately used in the subsequent function
does_term_support_setting_title (dtsst) for the purposes of whitelisting
certain terminals.
If an Alacritty user does not have the terminfo for alacritty present in
their terminfo database, Alacritty sets the TERM variable to
"xterm-256color", but if the terminfo for Alacritty is present, TERM is
instead set to "alacritty".
Prior to this change, none of the "fallback patterns" in the dtsst
function (which is used to ultimately decide whether or not a given
value of the TERM environment variable is supported) would apply to a
value of "alacritty". Ordinarily, the dtsst function would return true
if nothing matches, but one of the final checks involves testing the
result of ttyname_r to see if it contains the substring "tty", which
causes dtsst to return false. In the case where TERM="alacritty", this
is erroneous, because Alacritty does, indeed, support changing its title
and will also silently ignore attempts to change the title if that
behavior has been disabled by the user [1].
The changed file, src/env_dispatch.cpp, was reformatted by clang-format
in accordance with the documented procedures for contributors.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
[1]: 1dacc99183/alacritty_terminal/src/term/mod.rs (L896-L900)
When fish exits, it tries to restore the foreground process group.
However this may actually steal control of the fg process group
from another process. Fix this by clearing the SIGTTOU handler so
that tcsetpgrp() will fail.
Credit to @mqudsi for awesome debugging.
Fixes#7060
Prior to this change, if the user's prompt was wider than the terminal, we
would reduce it to just `> `. With this change, attempt to truncate the
prompt.
For each line of the prompt, calculate its width. If the width exceeds
COLUMNS, prepend ellipsis to that line, and start removing characters
until it fits. Escape sequences are skipped.
Fixes#904
Initially I wanted to pick a different name to avoid confusion with
process groups, but really job trees *are* process groups. So name them
to reflect that fact.
Also rename "placeholder" to "internal" which is clearer.
Prior to this, jobs all had a pgid, and fish has to work hard to ensure
that pgids were inherited properly for nested jobs. But now the job tree
is the source of truth and there is only one location for the pgid.
job_lineage was used to track "where jobs came from" but the job tree idea is
a better abstraction. It groups jobs together similar to how a process group
would in other shells. Begin to remove the notion of lineage.
Job trees come in two flavors: “placeholders” for jobs which are only fish
functions, and non-placeholders which need to track a pgid. This adds
logic to allow a job to decide if its parent's job tree is appropriate,
and allocating a new tree if not.
job_tree represents the data that should be shared between a job and any
jobs that may be spawned by functions or eval run as part of that job. It
reifies shared data that before was handled piecemeal.
Currently fish aborts execution mid-pipeline if a file redirection
failed, which can leave the shell in a broken state (job abandoned after
giving control of the terminal to an already-executed job in the
pipeline).
This patch replaces a failed fd with a closed fd and continues execution
if the affected process wasn't the first in the pipeline.
While this is a hack to address the regression behind fish-shell/#7038
introduced in d62576c, it can also be argued that this behavior is
actually more correct... right?
Closes#7038.
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
Variables like $status and $history showed up in all scopes, including
universal, when querying with `set -q` or `set -S`.
This makes it so they all only count as set in global scope, because
we already only allow assignment to electric variables in global scope.
Fixes#7032
This patch fixes an underflow in the jump family of readline commands
when called via `commandline -f` outside of a bind context such as
`commandline -f backward-jump`. To reproduce, run that command at a
prompt and the shell will crash with a buffer underlow.
This happens because the jump commands have non-zero arity, requiring a
character event to be pushed on the function args stack. Pushing the
character event is handled in `function_push_args`, called by
`inputter_t::mapping_execute`, which checks the arity of the function
and enqueues the required number of charcter events. However,
`builtin_commandline` calls `reader_queue_ch`, which in turn calls
`inputter_t::queue_ch`, which immediately enqueues the readline event
without calling `function_push_args`, so the character event is never
pushed on the arg stack.
This patch adds a check in inputter_t::queue_ch which checks if the
character event is a readline event, and if so, calls
`function_push_args`.
When sending SIGCONT to a stopped job, this behaves now
a bit more like a job that was continued by the bg builtin;
bg uses job_t::continue_job which seems overkill here.
This just produced a spurious "Unknown signal" error on NetBSD and OpenBSD, and
the number picked was arbitrary. So let's just use the maximum that
appears to work everywhere.
(I will hate this if I test it elsewhere and need to reduce it to 62)
(This is a squashed commit, I did indeed hate it when I moved from
NetBSD to OpenBSD)
The default implementation will not print any output in that case, but this provides users with additional flexibility when it comes to customising the shell's behaviour.
This allows users to customise the behaviour of the shell by redefining the function. This is similar to how fish_title or fish_greeting behave, where the default implementation can be easily overridden.
The function receives as arguments the job id, command line, signal name and signal description.
This allows tools like `stty` to set the terminal modes and fish will
honor them, for external commands.
The modes for fish are kept as they are.
Until now, the only change fish would do to the external modes is to
disable flow control *every time*, this changes it to only disabling
it on startup.
After that we don't apply *any* changes to the external modes (no
checks or validation or...), because we've never done that (other than
flow control), and it's not been a problem.
Fixes#2315.
If we output text and end up in the last column, the sticky right edge
will cause a clr_eos to erase the last character. Ensure this doesn't
happen by not issuing clr_eos in that case.
Fixes#6951
If a readline command is bound to a key sequence which also sends a
signal, then fish will set the cancel flag in addition to handling the
command. But this cancel flag is then persistent. Ensure it gets cleared
after each command.
Fixes#6937
The manual page for statfs(2) only lists SMB_SUPER_MAGIC and
CIFS_MAGIC_NUMBER, but it turns out there's a third type of CIFS/SMB
mount, represented by SMB2_MAGIC_NUMBER.
Haunting me from #6609.
Use inline initializers rather than the constructor, and adopt some
maybe_t.
Also move post_buff_1 and post_buff_2 to local variables instead of
member variables.
Commit 5fccfd83ec, with the fix for #6806,
switched eval to buffer its output (like other builtins do). But this
prevents using eval with commands that wants to see the tty, especially
fzf. So only buffer the output if the output is piped to the next process.
This will solve #6955 (which needs to go into a point release).
builtin_eval needs to know whether to set up bufferfills to capture its
output and/or errput; it should do this specifically if the output and
errput is piped (and not, say, directed to a file). In preparation for
this change, add bools to io_streams_t which track whether stdout and
stderr are specifically piped.
Prior to this fix, builtin_eval would direct output to the io_chain of the
job. The problem is with pipes: `builtin_eval` might happily attempt to
write unlimited output to the write end of a pipe, but the corresponding
reading process has not yet been launched. This results in deadlock.
The fix is to buffer all the output from `builtin_eval`. This is not fun
but the best that can be done until we have real concurrent processes.
Fixes#6806
Give string expansion an (optional) parent pgroup. This is threaded all
the way into eval(). This ensures that in a mixed pipeline like:
cmd | begin ; something (cmd2) ; end
that cmd2 and cmd have the same pgroup.
Add a test to ensure that command substitutions inherit pgroups
properly.
Fixes#6624
Changes it from
```
$fish_color_user: not set in local scope
$fish_color_user: set in global scope, unexported, with 1 elements
$fish_color_user[1]: length=3 value=|080|
$fish_color_user: set in universal scope, unexported, with 1 elements
$fish_color_user[1]: length=7 value=|brgreen|
```
(with the trailing empty line - not just a newline)
to
```
$fish_color_user: set in global scope, unexported, with 1 elements
$fish_color_user[1]: |080|
$fish_color_user: set in universal scope, unexported, with 1 elements
$fish_color_user[1]: |brgreen|
```
* Fire fish_postexec event after tokenization error
This is a fix for issue #6816 "shell integration with tokenization error"
* Pass command-line to fish_postexec on tokenization error
* Rename and move event for tokenization error
For the last 15 years the space was only skipped when the completion
ended in one of "/=@:". Add ".," since they are also sometimes used to
separate independent words within a token.
Fixes#6928
Improves on #6833
