There should be no functional changes in this commit.
The global variable `$_` set in the parser variables by `reader.cpp` and
read by the `status` builtin was deprecated in fish 2.0 but kept around
internally because there's no good way to store/share/forward parser
variables.
A new enum is added that identifies the status variable and they are
stored in a private array in the parser. There is no need for
synchronization because they are only set during job init and never
thereafter. This is currently asserted via ASSERT_IS_MAIN_THREAD() but
that assert can be dropped in the interest of making the parser possible
to clone and use from worker threads.
The old `$_` global variable is still kept for backwards compatibility,
though it will be dropped in a future release.
As the user is typing an argument, fish continually checks if the input is
the prefix of a valid file path. If yes, the input is underlined.
The same prefix-logic is used for all tokens on the command line, even for
"finished" tokens. This means we highlight any token that happens to be
a prefix of a valid file path. We actually want this to only apply to the
token that the user is currently typing.
Let's use the prefix-logic only for tokens adjacent to the cursor. This should
better match user expectations (and reduce IO traffic). I don't think this is
the perfect criteria but I don't know how else we can determine if a token is
"unfinished".
When visiting the "cd" node, we mark invalid paths as error, but don't
underline valid paths. This works fine most of the time because we later
underline paths (for any command, not just "cd").
However the latter check fails to honor CDPATH. Let's correct that, which
also allows to simplify the logic.
The next commit wants to move the "Underline every valid path" logic into the
visit() methods. The logic currently polls the cancel checker before checking
each path. If that's valid, it should probably have the same behavior inside
visit(). Since we currently can't cancel an AST-visitation, the next best
thing seems to suspend all IO operations, the rest should be very fast anyway.
I'm not sure if the motivation is strong enough; a conceivable alternative
would be to stop using the cancel checker altogether for highlighting.
When passing a value of type maybe_t<size_t>, clangd complains:
Parameter 'cursor' is passed by value and only copied once; consider
moving it to avoid unnecessary copies (fix available)
We get this warning because maybe_t<size_t> is not trivially copyable
because it has a user-defined destructor and copy-constructor. Let's remove
them if the contained type is trivially copyable, to avoid such warnings.
No functional change.
The destructor is equivalent to the compiler-generated one. The user-defined
destructor prevents maybe_t<size_t> from bearing the predicate "trivially
copyable". Let's remove it. No functional change.
This particular variant must be executed as a pexpect test since it relies on
the interactive-only `$history` to trigger the recursion. Note that recursion is
possible via other means (e.g. reading/writing a file), the usage of history
here is just one such example.
A false negative while testing locally should be a rare thing, and individual
pexpect tests already take too long in case of a non-match making for a painful
edit-test loop.
It seems to have originally been thought that the only possible way a stack
overflow could happen is via function calls, but there are other possibilities.
Issue #9302 reports how `eval` can be abused to recursively execute a string
substitution ad infinitum, triggering a stack overflow in fish.
This patch extends the stack overflow check to also check the current
`eval_level` against a new constant `FISH_MAX_EVAL_DEPTH`, currently set to a
conservative but hopefully still fair limit of 500. For future reference, with
the default stack size for the main/foreground thread of 8 MiB, we actually have
room for a stack depth around 2800, but that's only with extremely minimal state
stored in each stack frame.
I'm not entirely sure why we don't check `eval_depth` regardless of block type;
it can't be for performance reasons since it's just a simple integer comparison
- and a ridiculously easily one for the branch predictor handle, at that - but
maybe it's to try and support non-recursive nested execution blocks of greater
than `FISH_MAX_STACK_DEPTH`? But even without recursion, the stack can still
overflow so may be we should just bump the limit up some (to 500 like the new
`FISH_MAX_EVAL_DEPTH`?) and check it all the time?
Closes#9302.
A `block_t` instance is allocated for each live block type in memory when
executing a script or snippet of fish code. While many of the items in a
`block_t` class are specific to a particular type of block, the overhead of
`maybe_t<event_t>` that's unused except in the relatively extremely rare case of
an event block is more significant than the rest, given that 88 out of the 216
bytes of a `block_t` are set aside for this field that is rarely used.
This patch reorders the `block_t` members by order of decreasing alignment,
bringing down the size to 208 bytes, then changes `maybe_t<event_t>` to
`shared_ptr<event_t>` instead of allocating room for the event on the stack.
This brings down the runtime memory size of a `block_t` to 136 bytes for a 37%
reduction in size.
I would like to investigate using inheritance and virtual methods to have a
`block_t` only include the values that actually make sense for the block rather
than always allocating some sort of storage for them and then only sometimes
using it. In addition to further reducing the memory, I think this could also be
a safer and saner approach overall, as it would make it very clear when and
where we can expect each block_type_type_t-dependent member to be present and
hold a value.
This is a false positive as a result of disabling TLS support in LSAN due to an
incompatibility with newer versions of glibc.
Also remove the older workaround (because it didn't work).
These are NOT build-time defines but rather run-time environment variables! They
have never had any effect and we have effectively never used them to affect
sanitizer behavior under CI with ASAN/UBSAN/LSAN enabled.
(I caught this because the tests don't pass with either of LSAN_OPTIONS
`verbosity=1` or `log_threads=1` because they inject text into the stderr
output, ensuring they never pass littlecheck.)
For security reasons, some terminals require explicit permission from the
user to interpret OSC 52. One of them is [tmux] but that one usually runs
inside another terminal. This means we can usually write directly to the
underlying terminal, bypassing tmux and the need for user configuration.
This only works if the underlying terminal is writable to the fish user,
which may not be the case if we switched user. For this reason, keep writing
to stdout as well, which should work fine if tmux is configured correctly.
[tmux]: https://github.com/tmux/tmux/wiki/Clipboard
When running inside SSH, Control-X runs a clipboard utility on the remote
system. For pbcopy (and probably clip.exe too) this means that we write to the
remote system's clipboard. This is usually not what the user wants (although
it is consistent with fish_clipboard_paste). When X11 forwarding is used,
xclip/xsel copy to the SSH client's clipboard, which is what most users want.
When we don't have X11 forwarding, we need a different solution. Fortunately,
modern terminal emulators implement the OSC 52 escape sequence for setting
the clipboard of the terminal's system. Use it in fish_clipboard_copy.
Tested in SSH and Docker containers on foot, iTerm2, kitty, tmux and xterm
(this one requires "XTerm.vt100.allowWindowOps: true").
Should also work in GNU screen and Windows Terminal. On terminals that don't
support OSC 52 (like Gnome Terminal or Konsole), it seems to do nothing.
Since there does not seem to be a way to feature-probe OSC 52, let's just
always do both (pbcopy and friends as well as OSC 52). In future, we should
probably stop calling pbpaste and clip.exe, at least on remote systems.
I think there is also an escape sequence to request pasting the system
clipboard but that's less important and less popular, possibly due to
security concerns.
This makes the output a little easier on the eyes.
Tests appear to not need any changes to pass. I always forget whether or not
littlecheck cares about whitespace.
Two different bugs completely broke `trap -p`. First bug broke filtering of
functions with trap handlers (`functions -na` prints functions separated by a
comma, not a new line). Second bug broke showing of function definitions for
traps because a refactor renamed only some call sites but references to `$i`
renamed.
These issues were introduced in a6820cbe and appear to have been caught just in
time: no released version is affected (changes made post-3.5.1).
The Dockerfiles had bitrotted some.
Get them passing again, add libpcre2-dev where we can so we aren't
hitting more servers than necessary, and reformat the bionic files so
they can share more of the same image.
- Clean up the wording a little.
- Highlight the limitations of the "debugger" more clearly and don't mislead
people into thinking it's possible to really interactively set/remove
breakpoints except in select circumstances.
Sidenote: I can't believe we're using a markup language that doesn't support
nested inline markup. What a crying shame, rST!
It's a variable that holds all potential directories. The old name
makes it confusing to look at some of its usage sites and figure out
what is actually going on because they make no sense if $dir is only one
entry.
Don't just save known color values but any values that could have been loaded
from a .theme file.
Also, refactor the theme variable name whitelist/filter in a shared "global"
variable so we never forget to update it at any of the individual use sites.
The documentation states that running `fish_config theme save` after
`fish_config theme choose [theme_name]` will result in "saving" the
currently chosen theme, but this does not match the actual behavior of
`fish_config theme save` which expects a trailing argument specifying
the name of the theme to select/persist.
Given that the documented way has been included in a release and that it
makes more sense than calling `fish_config theme save xxx` when you are
*loading from* xxx and not *saving to* xxx, this patch revises
`fish_config.fish` to support the documented behavior.
When `fish_config theme save xxx` is used, xxx is loaded w/ its specified colors
saved to the according variables in the universal scope. But if `fish_config
theme save` is used without a theme's name specified, then the currently
specified (known) fish color variables are persisted from whatever scope they're
currently in (usually in the global scope from previewing a theme) to universal
variables of the same name.
This does *not* catch color variables unknown to fish! If a theme and a
prompt agree on some variable to hold some color but it's not a color variable
known to fish, it won't be persisted!
Closes#9088.
