Introduce a "fish_escape_delay_ms" variable to allow the user to configure the
delay used when seeing a bare escape before assuming no other characters will
be received that might match a bound character sequence. This is primarily
useful for vi mode so that a bare escape character (i.e., keystroke) can
switch to vi "insert" to "normal" mode in a timely fashion.
Rather than storing short and long options separately, using
a complicated set of invariants, store them in a single string
and use an explicit type complete_option_type_t to track how they
are interpreted.
This was a "cache" of dubious value that was also very confusing.
The idea was to express in one place all of the short options that
were allowed for a command, in a big string. But it's simpler to
just construct that on-demand by walking the list of
complete_entry_opt_t.
Also remove some other dead code as part of cleanup.
The fix for #2075 inadvertently started unescaping the strings emitted
from `commandline -b`. Only strings emitted with the `-o` flag are
supposed to be unescaped.
Fixes#2210.
If you have a prompt preceded by a new line, you'll get a line full of spaces instead of an empty line above your prompt. This doesn't make a difference in normal usage, but copying and pasting your terminal log becomes a pain. This commit clears that line, making it an actual empty line.
The random builtin command may or may not produce values with a truly
random distribution. So make the documentation reflect that reality. Also,
make the command consistent with similar shells (e.g., bash, zsh) which
produce a range of [0..32767].
Resolves issue #1272.
Before this change, `fish ./test.fish` would fully resolve the
relative paths and symlinks of test.fish, as reported by `status -f`.
However `source` would not. With this change, both cases return relative
paths. `realpath` may be used by scripts to resolve them.
Fixes#2643
My PR #2578 had the unexpected side-effect of altering the tty modes of
commands run via "fish -c command" or "fish scriptname". This change fixes
that; albeit incompletely. The correct solution is to unconditionally set
shell tty modes if stdin is attached to a tty and restore the appropriate
modes whenever an external command is run -- regardless of the path used to
run the external command. The proper fix should be done as part of addressing
issues #2315 and #1041.
Resolves issue #2619
Increase the delay between seeing an escape character and giving up on
whether additional characters that match a key binding are seen. I'm
setting the value to 500 ms to match the readline library. We don't need
such a large window for sequences transmitted by a terminal (even over ssh
where network delays can be a problem). However, we can't expect humans to
reliably press the escape key followed by another key with an inter-char
delay of less than ~250 ms based on my testing and research. A value of
500 ms provides a nice experience even for people using "fish_vi_mode"
bindings as a half second to switch from insert to normal mode is still
fast enough that most people won't even notice.
Resolves#1356
While investigating issue #2619 my first thought was that the problem
had something to do with the "is_interactive_session" global variable.
That preliminary conclusion appears to be wrong (i.e., the problem
lies elsewhere). However, that hypothesis caused me to look at function
"fish_parse_opt" and other mentions of "is_interactive_session".
I decided to take the opportunity to simplify and improve the style of
"fish_parse_opt" since I just spent an hour reviewing the code that
references "is_interactive_session". For example, the "has_cmd" variable
isn't really needed. And there is inconsistent whitespace not to mention
confusion about bool's versus int's and zero versus NULL.
Rather than returning a list of productions and an index,
return the relevant production directly from the rule function.
Also introduce a tag value (replacing production_idx) which tracks
information like command decorations, etc. with more clarity.
When replacing the existing fish process with a new process it is
important to restore the temrinal modes to what they were when fish
started running. We don't want any tweaks done for the benefit of fish
(e.g., disabling ICRNL mode) to bleed thru to an "exec"ed command.
Resolves#2609
If stdio is dead due to EPIPE, there's no great reason to spew a stack dump.
This will still write an error to stderr if stdout dies. This might be
undesirable, but changing that should be considered separately.
It is critical that we ensure our interactive tty modes are in effect at
the earliest possible moment. This achieves that goal and is harmless if
stdin is not tied to a tty. The reason for doing this is to ensure that
\r characters are not converted to \n if we're running on the slave side
of a pty controlled by a program like tmux that is stuffing keystrokes
into the pty before we issue our first prompt.
The special token "normal" should not be in the basic sixteen color table
because a) it is not a color, and b) it is special cased with the result of
resetting the terminal colors (usually via a ANSI X3.64 CSI [0m sequence).
This adds support for the ANSI x3.64 "bright" colors in the basic sixteen
color palette. This is especially useful when trying to use the base colors
as a background color. The "bright" variants tend to be more useful as
background colors compared to the non-bright variants.
This also fixes a bug in so far as palette number 7 is actually grey and
not white whereas palette number 15 is white. At least on the terminal
emulators on which I've tested this change (Ubuntu xterm & uxterm, Mac
OS X Terminal & iTerm2).
Resolves issue #1464.
We identify when the universal variable file has changed out from under us by
comparing a bunch of fields from its stat: inode, device, size, high-precision
timestamp, generation. Linux aggressively reuses inodes, and the size may be
the same by coincidence (which is the case in the tests). Also, Linux
officially has nanosecond precision, but in practice it seems to only uses
millisecond precision for storing mtimes. Thus if there are three or more
updates within a millisecond, every field we check may be the same, and we are
vulnerable to the ABA problem. I believe this explains the occasional test
failures.
The solution is to manually set the nanosecond field of the mtime timestamp to
something unlikely to be duplicated, like a random number, or better yet, the
current time (with nanosecond precision). This is more in the spirit of the
timestamp, and it means we're around a million times less likely to collide.
This seems to fix the tests.
input_mapping_execute, when passed false for allow_commands, will return
R_NULL. However currently it does this unconditionally, even if we don't
have any commands. This defeats our read-ahead optimization, so we
always read and process one byte at a time. This caused pasting to be
much slower.
Fixes#2215
If we are cd'ing into a directory, and the directory has only one
child which is itself a directory, the autosuggestion should
descend as far as it can.
Fixes#2531
Previously 'set -ql' would only look for variables in the
immediate local scope. This was not very useful. It's also
arguably surprising, since a 'set -l' in a function, followed
by a 'set -ql' in a child block, would fail. There was also no
way to check for a function-scoped variable, since omitting the
scope would also pull in global variables.
We could revisit this and introduce an explicit function scope.
Fixes#2502
New implementation of migration code within the history_t class will
copy the contents of the old fish_history found in the config directory
to its new location in the data directory. The old file is left intact.
This is done only in the event that a fish_history is not already found in
the data directory ($XDG_DATA_HOME/fish or ~/.local/share/fish).
The fish_history file is now located in the "data"
directory ($XDG_DATA_HOME/fish or ~/.local/share/fish),
accessible using the function `path_get_data`.
(This commit also cleans trailing whitespace in the source file.)
Add new functions path_get_data and path_create_data which parallel existing
functions path_get_config and path_create_data. The new functions refer to
XDG_DATA_HOME, if it is defined, or ./local/share if not.
Modify history_filename to use the new function path_get_data.
As a consequence, fish_history will now be located in XDG_DATA_HOME,
not XDG_CONFIG_HOME.
Note that these changes mirror what is already used in
fish-shell/share/tools/create_manpage_completions.py, which stores the
completions in XDG_DATA_HOME
This change matches recommendations in the xdg basedir spec at
http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
($XDG_DATA_HOME defines the base directory relative to which user specific data
files should be stored. If $XDG_DATA_HOME is either not set or empty, a default
equal to $HOME/.local/share should be used.)
It addresses suggestions from the following issues:
1. Don't put history in $XDG_CONFIG_HOME (closes#744)
https://github.com/fish-shell/fish-shell/issues/744
2. Fish is placing non-config files in $XDG_CONFIG_HOME #1257https://github.com/fish-shell/fish-shell/issues/1257
3. Move non-config data out of $XDG_CONFIG_HOME #1669https://github.com/fish-shell/fish-shell/issues/1669
Teach Xcode to run new script xcode_version_gen.sh before building
the fish_shell and fish_indent targets. The script generates file
fish-build-version.h for inclusion by fish_version.cpp.
Note that Xcode always runs the script because of the phony target
named force-fish-build-version.h, but fish-build-version.h is only
touched if the contents of FISH-BUILD-VERSION-FILE change.
Fixes#890
This change eliminates global variables like stdout_buffer. Instead we wrap up
the IO information into a new struct io_streams_t, and thread that through
every builtin. This makes the intent clearer, gives us a place to hang new IO
data, and eliminates the ugly global state management like builtin_push_io.
This adds the new builtin 'string' which supports various string
manipulation and matching algorithms, including PCRE based regular
expressions.
Fixes#2296
Squashed commit of the following:
commit 4c3eaeb6e57d76463e9683c327142b0aeafb92b8
Author: ridiculousfish <corydoras@ridiculousfish.com>
Date: Sat Sep 12 12:51:30 2015 -0700
Remove testdata and doc dirs from pcre2 source
commit b2a8b4b50f2398b204fb72cfe4b5ba77ece2e1ab
Merge: 11c8a477974aab
Author: ridiculousfish <corydoras@ridiculousfish.com>
Date: Sat Sep 12 12:32:40 2015 -0700
Merge branch 'string' of git://github.com/msteed/fish-shell into string-test
commit 7974aab6d3
Author: Michael Steed <msteed@saltstack.com>
Date: Fri Sep 11 13:00:02 2015 -0600
build pcre2 lib only, no docs
commit eb20b43d2d
Merge: 1a09e705f519cb
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Sep 10 20:00:47 2015 -0600
Merge branch 'string' of github.com:msteed/fish-shell into string
commit 1a09e709d0
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Sep 10 19:58:24 2015 -0600
rebase on master & address the fallout
commit a0ec9772cd
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Sep 10 19:26:45 2015 -0600
use fish's wildcard_match() for glob matching
commit 64c25a01e3
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Aug 27 08:19:23 2015 -0600
some fixes from review
- string_get_arg_stdin(): simplify and don't discard the argument when
the trailing newline is absent
- fix calls to pcre2 for e.g. string match -r -a 'a*' 'b'
- correct test for args coming from stdin
commit ece7f35ec5
Author: Michael Steed <msteed68@gmail.com>
Date: Sat Aug 22 19:35:56 2015 -0600
fixes from review
- Makefile.in: restore iwyu target
- regex_replacer_t::replace_matches(): correct size passed to realloc()
commit 9ff7477a92
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Aug 20 13:08:33 2015 -0600
Minor doc improvements
commit baf4e096b2
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 19 18:29:02 2015 -0600
another attempt to fix the ci build
commit 896a2c2b27
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 19 18:03:49 2015 -0600
Updates after review comments
- make match/replace without -a operate on the first match on each
argument
- use different exit codes for "no operation performed" and errors, as
grep does
- refactor regex compile code
- use human-friendly error messages from pcre2
- improve error handling & reporting elsewhere
- add a few tests
- make some doc fixes
- some simplification & cleanup
- fix ci build failure (I hope)
commit efd47dcbda
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 12 00:26:07 2015 -0600
fix dependencies for parallel make
commit ed0850e2db
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 23:37:22 2015 -0600
Add missing pcre2 files + .gitignore
commit 9492e7a7e9
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 22:44:05 2015 -0600
add pcre2-10.20 and update license.hdr
commit 1a60b93371
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 22:41:19 2015 -0600
add string builtin files
- string builtin source, tests, & docs
- changes to configure.ac & Makefile.in
commit 5f519cb2a2
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Sep 10 19:26:45 2015 -0600
use fish's wildcard_match() for glob matching
commit 2ecd24f795
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Aug 27 08:19:23 2015 -0600
some fixes from review
- string_get_arg_stdin(): simplify and don't discard the argument when
the trailing newline is absent
- fix calls to pcre2 for e.g. string match -r -a 'a*' 'b'
- correct test for args coming from stdin
commit 45b777e4dc
Author: Michael Steed <msteed68@gmail.com>
Date: Sat Aug 22 19:35:56 2015 -0600
fixes from review
- Makefile.in: restore iwyu target
- regex_replacer_t::replace_matches(): correct size passed to realloc()
commit 981cbb6ddf
Author: Michael Steed <msteed68@gmail.com>
Date: Thu Aug 20 13:08:33 2015 -0600
Minor doc improvements
commit ddb6a2a8fd
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 19 18:29:02 2015 -0600
another attempt to fix the ci build
commit 1e34e3191b
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 19 18:03:49 2015 -0600
Updates after review comments
- make match/replace without -a operate on the first match on each
argument
- use different exit codes for "no operation performed" and errors, as
grep does
- refactor regex compile code
- use human-friendly error messages from pcre2
- improve error handling & reporting elsewhere
- add a few tests
- make some doc fixes
- some simplification & cleanup
- fix ci build failure (I hope)
commit 34232e152d
Author: Michael Steed <msteed68@gmail.com>
Date: Wed Aug 12 00:26:07 2015 -0600
fix dependencies for parallel make
commit 00d7e78169
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 23:37:22 2015 -0600
Add missing pcre2 files + .gitignore
commit 4498aa5f57
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 22:44:05 2015 -0600
add pcre2-10.20 and update license.hdr
commit 290c58c72e
Author: Michael Steed <msteed68@gmail.com>
Date: Tue Aug 11 22:41:19 2015 -0600
add string builtin files
- string builtin source, tests, & docs
- changes to configure.ac & Makefile.in
Previously, the process's inherited $TERM value would be used.
This prevented users from being able to set $TERM in their config.fish files.
To make matters worse, the error message would print the computed $TERM value,
giving the mistaken impression that it was being used.
Signed-off-by: David Adam <zanchey@ucc.gu.uwa.edu.au>
Cygwin FIFOs do not support more than one reader, so avoid them on this
platform. An autoconf feature test would be helpful but is tricky to
write.
Closes#2152.
When an error occurs midway through a token, like abc(def,
make the caret point at the location of the error (i.e. the paren)
instead of at the beginning of the token.
In a few places, we need to add a prefix to completions that
replace the token. This change factors that logic into its
own function prepend_token_prefix.
Rather than trying to detect Unicode support from the environment, check
the printable width of characters in the current locale before deciding
on whether to use them.
Closes#1927.
This change moves source files into a src/ directory,
and puts object files into an obj/ directory. The Makefile
and xcode project are updated accordingly.
Fixes#1866
This change moves source files into a src/ directory,
and puts object files into an obj/ directory. The Makefile
and xcode project are updated accordingly.
Fixes#1866
