This is to the benefit of systems with ancient GNU sed, which does not
recognize "-E", but only "-r".
Fixes#2305 - even if it doesn't replace all `sed -E` invocations in the
codebase, the others are unlikely to occur on CentOS and other similarly
crusty systems.
`sort -u | uniq` is completely redundant, calling grep for every
status-pair is unnecessary, `contains` doesn't take the word "in" as
special.
None of these are critical and there's basically no performance benefit
since this function is utterly dominated by hg calls.
This doesn't add anything except slowing the function down by about
33%. Checking for a branch is just as good and that is displayed in the
prompt anyway.
This is used in at least 4 places, all of which have a bug in that they
print "options" as a valid repo. It seems better to fix it once,
especially given that there are tons of AUR helpers and pacman wrappers,
all of which might need this info.
net_tools, which provides `ifconfig` and `netstat`, among other things,
has last been updated in 2013. This means `ifconfig` on linux is
basically dead.
Instead of ifconfig, use `ip` (from iproute2), which is much more powerful and
provides a much more annoying commandline syntax.
Instead of netstat, just look at /sys/class/net.
fish_user_key_bindings is the user's, and they should know if they want
vi-ish bindings or emacs-ish (or nano-ish). If they want to define
multiple, they can also do that (e.g. via checking what
$fish_key_bindings is set to).
Fixes#2254
CC @kballard
See #1925: This allows users to disable the cnf-logic which can be quite
slow on small hardware (like a raspberry pi).
Squashed commit of the following:
commit 742a59e30d8db24b6bb5067d4204d4b5cc01c1c3
Author: Fabian Homborg <FHomborg@gmail.com>
Date: Sun Aug 30 18:23:41 2015 +0200
Erase startup cnf-handler early
Simplifies the code a bit - in particular it removes the special-casing
from the startup handler.
commit 638a97e7f31f302b65e044c93c638c03a69e31f5
Author: Fabian Homborg <FHomborg@gmail.com>
Date: Mon Aug 24 20:14:46 2015 +0200
Make overriding cnf-handler work
Do this by renaming the __fish_command_not_found_handler used during
startup to __fish_startup_command_not_found_handler. That allows us to
check if __fish_command_not_found_handler has been defined and skip the
setup of the normal one.
Now disabling cnf-handling can be done via defining an empty
__fish_command_not_found_handler in config.fish
This adds a special colorscheme and prompt function guaranteed to work
on a VT and activates them automatically if $TERM = "linux".
set_color is overridden to only allow the 8 colors VTs have (under the
assumption those are always the same) and the color variables are
shadowed with global ones so they don't pollute our nice capable terms.
This used to be a function because we didn't have complete -w
Use that and it becomes a bit simpler.
This also simplifies the code in a few other ways (like removing a
useless-use-of-cat)
and adds comments about a few edgecases.
changed `function __trap_handler_EXIT --on-exit %self` to `function __trap_handler_EXIT --on-process-exit %self`
I'm guessing the on-exit syntax was from an older version? Trapping EXIT with that syntax caused errors.
The following behaviour is added:
- an empty pushd exchanges the top two directories in the stack;
- pushd +<n> rotates the stack so that the n-th directory (counting from the left of the list shown by dirs, starting with zero) is at the top;
- pushd -<n> rotates the stack so that the nth directory (counting from the right of the list shown by dirs, starting with zero) is at the top.
1. When run with no arguments, make abbr do the equivalent
of `abbr --show`
2. Enable "implicit add", e.g. `abbr gco git checkout`
3. Teach `abbr --show` to not use quotes for simple cases
4. Teach abbr to output -- when the abbreviation has
leading dashes
Add some basic tests to abbr too.
Add a new function fish_mode_prompt which (if it is defined) has its output
prepended to the left prompt. Rather than replacing the prompt wholesale, make
fish_vi_mode enable this function by setting a variable __fish_vi_mode. This
enables vi mode to interoperate nicely with custom prompts. Users who want
to change how the mode is reported can either redefine this function or
erase it entirely. Fixes#1988.
- Add four new functions: forward-bigword, backward-bigword,
kill-bigword, backward-kill-bigword
- Add new enum move_word_style_whitespace and related state machine
method
- Change vi key bindings to operate on bigwords: B, gE, W, E, dW, diW,
daW, dE, dB, dgE, cW, ciW, caW, cE, cB, cgE, yW, yiW, yaW, yE, yB,
ygE
Notification is sent using an OSC 777 escape sequence as described at
http://known.phyks.me/2014/local-notifications-for-weechat-and-urxvt.
The specific notification is crafted to match that emitted by bash
when running under Fedora 22 with the "vte-profile" RPM installed.
See the code for "__vte_prompt_command" starting at
http://pkgs.fedoraproject.org/cgit/vte291.git/tree/vte291-command-notify.patch#n307
to see exactly what bash produces. My approach is, however, a bit
more paranoid about control characters embedded in commands.
Gnome-terminal 3.16 responds to this escape sequence by posting a
desktop notification if the containing terminal window does not have
focus. This lets the user know that a long-running background command
has completed. Job notification is promoted as a Fedora 22 feature
(http://fedoramagazine.org/terminal-job-notifications-in-fedora-22-workstation/),
so it would be good for fish users to be benefit from it.
Conversely, anyone who does not want this feature can use "functions
--erase __notify_vte_command_completed" to turn it off.
With the fix for #365, fish_command_not_found event handlers
receive the command and all of its arguments. But commands
like /usr/lib/command-not-found expect only the command name.
So when invoking an external command, just pass the command
name, not all of the arguments.
In 73f344f41b, we allowed autoloaded functions to be deleted.
For some reason, funcsave immediately deletes the function it
creates. This previously did very little, since the function would
immediately be re-autoloaded, but with the fix for 73f344f41b
the function gets tombstoned. So the effect is that funcsave
makes the function disappear! This simply removes the erase call,
which dates back to fish 1.x.
It seems that `ul` can't handle the escape sequences for bold text that `nroff` generates on my system. Fixed by either removing `| ul`, or adding `-c` to the `nroff` command.
Needs testing for old (OSX?) versions of nroff.
Support for space-delimited abbreviations was added to the expansion
parser in fbade198; this commit extends that support to the user-facing
tools, and documents the space-separated behaviour. Equals-delimited
abbreviations are expected to be removed before the next release.
Work on #731.
There is no CTRL-C handler for the default mode in the vi bindings. This makes it difficult to say "never mind" and start a new command line like you can do in bash's vi mode.
There were CTRL-C handlers for insert and visual modes that go back to default mode, but nothing happens in default mode. I copy-pasted the CTRL-C handler from the default key bindings file.
(Ideally, the behaviour of git could be implemented: pipe the input
through a pager iff the length is > window size and in interactive
mode).
Closes#1076.
The terminal width magic that __fish_print_help learned doesn't help
when builtin_print_help runs it in a subshell. Instead, add an
undocumented --tty-width flag to __fish_print_help that's used to pass
the terminal width.
As a result of this rewrite, the output now:
* Expands to fit the terminal width, like `man` does
* Preprocesses the manpage with `tbl` just in case, since `man` does
this, even though I doubt any fish manpages use `tbl` formatting.
* Handle bold/underline with the `ul` command as it was designed for
instead of trying to fake it with `sed`.
* Compresses blank lines as `man` does with the default `less -is`
pager.
The usage is still the same, but it's a lot more robust, and also no
longer assumes $fish_user_abbreviations must be a universal variable.
This also fixes the unexpected error output when calling `abbr -a` with
no existing abbreviations.
Calling `abbr -a` with an abbreviation that already exists now silently
overwrites the abbreviation, just like `function` and `bind` do, instead
of complaining.
# The first commit's message is:
Simplify default fish_prompt
No need for the set_color caching now that it's a builtin.
Also simplify the 3 classic prompts in fish_config's sample_prompts set.
Remove comment that AFAICT is not true anymore.
Ensure someone setting __fish_active_key_bindings as a universal
variable doesn't screw up the initial keybinding load.
Apparently, in zsh, Meta+H can be used to display the manpage for
the current command. This commit adds this zsh feature to fish shell.
The F1 keybinding is left, although it's now secondary according to
fish help, as some terminal emulators don't let the user press F1 key.
Setting a non-existant path component to PATH logs an error to stderr.
This is not appropriate for non-interactive temporary modifications,
like the one done by the `sudo` completion helper function.
The new --wraps functionality was breaking aliases of the form
`alias foo='bar baz'`. That is, aliases where the body is multiple
words. Extract the first word of the body and use that instead.
Use better errors for aliases with no name or no body.
Add the --wraps option to 'complete' and 'function'. This allows a
command to (recursively) inherit the completions of a wrapped command.
Fixes#393.
When evaluating a completion, we inspect the entire "wrap chain" for a
command, i.e. we follow the sequence of wrapping until we either hit a
loop (which we silently ignore) or the end of the chain. We then
evaluate completions as if the wrapping command were substituted with
the wrapped command. Currently this only works for commands, i.e.
'complete --command gco --wraps git\ checkout' won't work (that would
seem to encroaching on abbreviations anyways). It might be useful to
show an error message for that case.
The commandline builtin reflects the commandline with the wrapped
command substituted in, so e.g. git completions (which inspect the
command line) will just work. This sort of command line munging is
also performed by 'complete -C' so it's not totally without precedent.
'alias will also now mark its generated function as wrapping the
'target.
Currently fish doesn't recognize toor as special. However, it's likely
that on BSD systems, fish shell will be used on toor, not on root (toor
is an intentionally existing account to use more advanced shell on, like
shell).
Use `functions -q` instead of searching the `functiosn -na` list for the
provided word. This may result in an automatically-loaded function being
sourced, but that happens anyway with the default output.
This change means the results of `test -q foo` can be relied upon to
indicate whether `foo` can actually be invoked. Previosly, if `foo` was
the name of an automatically-loaded function file but did not actually
define a function `foo`, and there was no execuable `foo`, then `type -q
foo` would lie and say `foo` can be invoked when it can't.
The --quiet flag is useful when only the exit status matters.
Fix the documentation for the -t flag to no longer claim that `type` can
print "keyword", as it never does that.
Stop printing a blank line for functions/builtins when the -p flag has
been passed. It's just not useful.
Track whether -a and -f have been supplied separately. That way both
`type -a -f command` and `type -f -a command` behaves correctly, as does
`type -a -f foo` where there are multiple executables named `foo` in the
$PATH.
Stop using getopt to parse flags. It's far more expensive than
necessary, and results in long flags not being parsed on OS X. This also
allows args starting with - after the options list to be properly
interpreted as a value to test.
Print the error message to stderr as is appropriate.
Use the new `command -p` functionality when the -a flag has not been
provided (`command` does not have any equivalent to the -a flag),
instead of using `which`. This is faster and also avoids any possible
disagreement between `which` and what fish thinks is valid.
Stop testing every path to see if it's executable, that test has already
been done by `which` or `command -p`.
The end result is `type -P ls` is roughly 250% faster, according to
profiling, on my OS X machine.
* use $XDG_CACHE_HOME for __fish_print_packages completion caches
* when starting fishd, redirect fishd output to /dev/null, not a
predictable path
Fix for CVE-2014-3219.
Closes#1440.
Fix for CVE-2014-2906.
Closes a race condition in funced which would allow execution of
arbitrary code; closes a race condition in psub which would allow
alternation of the data stream.
Note that `psub -f` does not work (#1040); a fix should be committed
separately for ease of maintenance.
Closes#1437
At some point the non-verbose, non-informative variant of the prompt
(e.g. the variant that looks like the bash prompt) was modified to try
and show the behind/ahead counts the same way the informative prompt
does. Besides being wrong, it also didn't work because behind/ahead
weren't defined.
Previously, fish's command_not_found handler would be installed in
__fish_config_interactive. Errors that occured early in startup (e.g. in
config.fish) or in non-interactive mode would therefore not be reported.
With this change, fish now exposes its default cnf handler as
__fish_default_command_not_found_handler . config.fish then installs a
cnfh that invokes the default. When fish goes interactive, the initial
cnfh is overwritten with a fancier one, that may in turn fall back to
invoking the default.
commit d81ae2665f
Author: Max Gonzih <gonzih@gmail.com>
Date: Sun Feb 2 16:22:18 2014 +0300
Check for command-not-found command on suse
commit 004b794c82
Author: Max Gonzih <gonzih@gmail.com>
Date: Sun Feb 2 14:04:41 2014 +0300
Fix cnf handler for Suse and Fedora
fixes#1208
Presently, `isatty` only works on a handful of keywords. Here it
is rewritten to be able to take any path, device or fd number as
an argument, and eliminates errors printed to stdout.
Per discussion in #1228, using `builtin test -c` within a pipe to
test special file descriptors is not viable, so this implementation
specifcially uses `command test`. Additionally, a note has been
added to the documentation of `test` regarding this potential
aberration from the expected output of the test utility under the
'Standards' section.
Comment out 'o' binding
Add '['/']' bindings to navigate current token history
Fix 'P' to paste indeed
Add "*P/"*p to insert current selection clipboard using xsel
These options will be passed to the bind command.
Now it's possible to call
fish_default_key_bindings -M insert
to set all original bindings to the insert mode
The following normal mode bindings are added:
o, I, A, gg, G, g^, g$, x, X, backspace, d*, D, s, S, c*, C, ~, gu,
gU, J, K, y*, Y, p, P
I was not able to add binding for 'O'
dd now deletes the whole line as vim, while D deletes the line to the
end. c, s, y act the same way
Continuation of https://github.com/fish-shell/fish-shell/pull/1195/.
Removes use of --delimiter and --fields with cut(1) as these are GNU
extensions.
Note that a number of completions use these options, but as they are
only for GNU/Linux-specific tools have remained unmodified.
There is no need to explicitly check for two arguments and set --bold.
Instead the user can simply "set __fish_git_prompt_color_flags --bold
red".
The current check violates the expectation set by the documentation
that you can use any set_color argument as the current code interprets
"--bold red" as "--bold --bold" instead.
Plus, by passing the full contents of the variable directly, the user
can do more adventurous things like set the background as well.
git.git's git-prompt may not contain a configurable prefix, but it
does display a space before the upstream information when displaying
verbose information. Rather than using a space always or never,
default to a space whenever verbose is in showupstream.
Adds a "name" option to __fish_git_prompt_showupstream that shows an
abbreviated branch name when the upstream type is verbose.
Based on git.git 1f6806c: git-prompt.sh: optionally show upstream
branch name
Closes#479 by piping STDERR to /dev/null.
Also does much less manipulation of the package list; there are no
packages in any of the archives containing the names that are stripped
out as far as I can see.
It's rather hacky, but it sort of works. (but then, this makes fish
compare to PHP (but PHP doesn't put that newline), so perhaps I
shouldn't do that - http://git.io/GFurbg)
I break compatibility with Mac OS X again, that I don't have access
to. Result: Stuff break, and I have to fix it, so it will perhaps
work. At least, I hope it will work.
Yes, hostname is broken under Cygwin, but for fish it's an issue, as it
makes fish_config more buggy than it needs to be (by making UTF-8 errors
according to Python).
git.git's __git_ps1 doesn't have an upstream prefix. I'm not sure why
one was added to our __fish_git_prompt, but it certainly shouldn't
default to a space.
It reuses $__fish_git_prompt_char_stateseparator, since it has a
similar meaning and goes otherwise unused when
$__fish_git_prompt_show_informative_status is set.
This changes the defaults for several characters when
$__fish_git_prompt_show_informative_status is set so that the prompt
looks more like the typical informative prompt.
Before: (master >1<2|+3#4*5%6)
After: (master↑1↓2|●3✖4✚5…6)
The defaults were taken from magicmonty/bash-git-prompt
This makes $__fish_git_prompt_show_informative_status imply
$__fish_git_prompt_showupstream = "informative", while adding a none
option for showupstream to disable it if desired.
A few characters and colors got added without being added to the event
list for repainting.
Also sort and re-align list of characters in validate_chars.
The code invoked `git rev-parse` several times when the required
information could be collected all at once.
This is based on the following commits from git.git:
efaa0c1: bash prompt: combine 'git rev-parse' executions in the main code path
e3e0b93: bash prompt: combine 'git rev-parse' for detached head
0f37c12: bash prompt: use bash builtins to check for unborn branch for dirty state
dd0b72c: bash prompt: use bash builtins to check stash state
It's a one line function called in a single place. I suspect it only
existed because the bash equivalent __gitdir existed (it was more
complex), but that function no longer exists either, as of git.git
511ad15: "bash prompt: run 'git rev-parse --git-dir' directly instead
of __gitdir()"
Simply using cut duplicates (poorly) `git rev-parse --short`
This also restores the ... printed after the abbreviation which
__fish_git_prompt had been missing.
Based on git.git e8f21ca: "bash prompt: print unique detached HEAD
abbreviated object name"
Unlike the rest of the __fish_git_prompt_char_* variables, it does not
have its own color because the most likely values are a space and
nothing.
based on git.git 15a54fb: prompt: introduce GIT_PS1_STATESEPARATOR
Adds a progress indicator to the rebase messages. (e.g. |REBASE 2/5)
based on the git-prompt portion of git.git b71dc3e: "bash-prompt.sh:
show where rebase is at when stopped"
git revert was taught to revert multiple commits, and it stores it
branch information in REVERT_HEAD just like the other *_HEAD files.
based on git.git 3ee4452: bash: teach __git_ps1 about REVERT_HEAD
Based on GIT_PS1_SHOW_COLORHINTS, it introduces more color by default
and also changes the color of the branch name based on if it is a real
branch or detached.
Based on the following commits from git.git:
9b7e776: show color hints based on state of the git tree
9b3aaf8: Fix up colored git-prompt
76c36c0: coloured git-prompt: paint detached HEAD marker in red
This is mostly useful for the next commit that will have different
colors default to different values, but it has one immediate change:
all __fish_git_prompt_color_* variables now default to
__fish_git_prompt_color instead of to nothing, as they used to.
* The original __git_ps1 function has split from the rest of
git-completion as of git.git af31a45
* Use the description for GIT_PS1_DESCRIBE_STYLE (added in git.git
50b03b0) for __fish_git_prompt_describe_style
* Update the description of __fish_git_prompt_showupstream to include
the meaning of '=' based on git.git f9db192: "Improve the
description of GIT_PS1_SHOWUPSTREAM"
* Note that the PROMPT_COMMAND versions of the command with extra
arguments don't work, in case someone used to the bash version is
looking for it.
* Note that I am updating the script so Kevin Ballard doesn't get
blamed for anything I break.
Operation and branch detection are merged together in the original
because branch information may come from different places depending on
the operation.
Merging the bare helper in helps avoid testing for the working
directory and bare status twice, both of which requires forking a new
process.
Also helps the code match the original more, which will make adding
new features easier.
Squashed commit of the following:
commit c208bc30b7747b3743212483b3dd7e3f90819f49
Merge: 97bea942633372
Author: Konrad Borowski <glitchmr@myopera.com>
Date: Fri Jul 19 09:56:12 2013 +0200
Merge branch 'command-not-found' of git://github.com/GlitchMr/fish-shell into command-not-found
commit 26333721b9
Author: Konrad Borowski <glitchmr@myopera.com>
Date: Fri Jul 19 09:55:13 2013 +0200
Fix command_not_found when not found
commit db34460bb5
Author: Konrad Borowski <glitchmr@myopera.com>
Date: Wed Jul 17 13:41:57 2013 +0200
Avoid showing standard command not found message when possible
In bash, command-not-found handler causes the standard messages to
not appear. Because of events model in fish, it isn't really an
option, so I moved the standard command not found message to
fish function. This way, the messages aren't repeated, and the
standard command not found message appears only when handler
couldn't be found.
* Added FreeBSD's pkg to __fish_print_packages
* Portmaster completes on installed packages and ports
* Options list as per fish_generate_completions, needs to be tidied
up further but will suffice for now
$git_dir was never set in __fish_git_prompt_current_branch, but used
in the case of a detached HEAD. This caused `cut -c1-7 $git_dir/HEAD`
to expand to `cut -c1-7` which then waited for input.
The code in question displays GIT_DIR! if the user is inside the .git
directory of a repository that has a working directory. Several git
commands won't work in that situation, so it's useful to warn the
user.
Normally I wouldn't bother, but it was difficult to follow the nested
if statements. Most of the file used tabs, so replaced all leading
spaces with the appropriate amount of tabs.
commit 5a577d970a293afe320b6c3280c10c2bd8a1ff50
Merge: 908b07596941b3
Author: ridiculousfish <corydoras@ridiculousfish.com>
Date: Sat Jun 1 22:59:16 2013 -0700
Merge branch 'dotdir-two-chars' of git://github.com/GlitchMr/fish-shell into GlitchMr-dotdir-two-chars
commit 96941b3a92
Author: Konrad Borowski <glitchmr@myopera.com>
Date: Sat May 25 09:55:43 2013 +0200
Support BSD sed
commit 60652c2bd2
Author: Konrad Borowski <glitchmr@myopera.com>
Date: Sun May 19 10:58:40 2013 +0200
Show first two characters for dotdirs. Fixes#754.
commit 4a9595845111bcc8d45419241f8f49bc3e8b3445
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:45:58 2013 +0200
use the new functions
commit 1c934ebbe65a82e92079952b15f31d3a92bc5e8f
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:45:21 2013 +0200
moves formatting code to the bottom in order to get it out of the way of all the colour handling
commit c62f827143c30f6810026c7e4a3d8b77178cd9a4
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:44:12 2013 +0200
adds helper returning whether or not there are staged files
commit 624e47cb85a7579bf284a6a7f0c9165dfa38b0ce
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:43:41 2013 +0200
adds helper returning whether or not the current branch is dirty
commit efc270da7b0998f564a7d2ae4ea3013ed6910e58
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:42:48 2013 +0200
adds helper returning whether or not a repo is bare
commit 0da668316cedb8e3fa166977be82c917ef67ad86
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:41:55 2013 +0200
adds helper returning current branch
commit 15cbcedc77199aea1868faee5d178d9547a4d541
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:41:10 2013 +0200
adds helper returning current operation
commit c3352d3e9e60bf94fd4bf412ad85d62bba4cbff8
Author: Harm Aarts <harmaarts@gmail.com>
Date: Fri May 24 10:40:20 2013 +0200
adds helper returning the git dir
commit f346e52b7814ebf1eed55f006c3bedc8ece38e3b
Author: Harm Aarts <harmaarts@gmail.com>
Date: Mon May 20 18:52:19 2013 +0200
use the fish_git_prompt_char_* variables
Valid DNS names cannot have a | character and hashed ssh hosts
always begin with the | character. Therefore we ignore lines that
begin with |.
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
- Fix branch for older git version (--short for symbolic-ref was not
available on git 1.7.9.5)
- Use index (git status) for checking if staged
- Add status indication for copied
- Remove variables for statuses (less litter in the variables)
- Remove usage of eval to echo and set_color
- Replace printf where possible with echo -n
