# Objective
Add extra metadata for the shader examples that contains the location of
their associated shader file(s). This is to be used for the bevy website
shader examples so that the shader code is underneath the rust code.
## Solution
Parse the example rust files for mentions of `.wgsl`, `.frag`, and
`.vert`, then append the found paths to a field called
`shader_code_paths` in the generated `index.md`s for each shader
example.
# Objective
- CI on main has been failing since #13640 was merged.
- Here's the [offending
run](https://github.com/bevyengine/bevy/actions/runs/9352635857/job/25741242787).
- One of the patch files is out of date, so it failed in the validation
check.
## Solution
- Regenerate the patch file. (The location has been moved to
`cluster/mod.rs`.)
## Testing
- Run `git apply
tools/example-showcase/reduce-light-cluster-config.patch`
- It should change `bevy_pbr/src/cluster/mod.rs` on line 239, decreasing
`total` and `z_slices`.
- CI's validation checks should also verify that this works, though only
after it gets merged.
# Objective
- Upgrade winit to v0.30
- Fixes https://github.com/bevyengine/bevy/issues/13331
## Solution
This is a rewrite/adaptation of the new trait system described and
implemented in `winit` v0.30.
## Migration Guide
The custom UserEvent is now renamed as WakeUp, used to wake up the loop
if anything happens outside the app (a new
[custom_user_event](https://github.com/bevyengine/bevy/pull/13366/files#diff-2de8c0a8d3028d0059a3d80ae31b2bbc1cde2595ce2d317ea378fe3e0cf6ef2d)
shows this behavior.
The internal `UpdateState` has been removed and replaced internally by
the AppLifecycle. When changed, the AppLifecycle is sent as an event.
The `UpdateMode` now accepts only two values: `Continuous` and
`Reactive`, but the latter exposes 3 new properties to enable reactive
to device, user or window events. The previous `UpdateMode::Reactive` is
now equivalent to `UpdateMode::reactive()`, while
`UpdateMode::ReactiveLowPower` to `UpdateMode::reactive_low_power()`.
The `ApplicationLifecycle` has been renamed as `AppLifecycle`, and now
contains the possible values of the application state inside the event
loop:
* `Idle`: the loop has not started yet
* `Running` (previously called `Started`): the loop is running
* `WillSuspend`: the loop is going to be suspended
* `Suspended`: the loop is suspended
* `WillResume`: the loop is going to be resumed
Note: the `Resumed` state has been removed since the resumed app is just
running.
Finally, now that `winit` enables this, it extends the `WinitPlugin` to
support custom events.
## Test platforms
- [x] Windows
- [x] MacOs
- [x] Linux (x11)
- [x] Linux (Wayland)
- [x] Android
- [x] iOS
- [x] WASM/WebGPU
- [x] WASM/WebGL2
## Outstanding issues / regressions
- [ ] iOS: build failed in CI
- blocking, but may just be flakiness
- [x] Cross-platform: when the window is maximised, changes in the scale
factor don't apply, to make them apply one has to make the window
smaller again. (Re-maximising keeps the updated scale factor)
- non-blocking, but good to fix
- [ ] Android: it's pretty easy to quickly open and close the app and
then the music keeps playing when suspended.
- non-blocking but worrying
- [ ] Web: the application will hang when switching tabs
- Not new, duplicate of https://github.com/bevyengine/bevy/issues/13486
- [ ] Cross-platform?: Screenshot failure, `ERROR present_frames:
wgpu_core::present: No work has been submitted for this frame before`
taking the first screenshot, but after pressing space
- non-blocking, but good to fix
---------
Co-authored-by: François <francois.mockers@vleue.com>
# Objective
- Ever since #13177, the `check-example-showcase-patches-still-work` job
has been failing in the merge queue.
- Specifically, the `asset-source-website.patch` file which modifies
`bevy_asset`'s `lib.rs`.
## Solution
- Re-create the patch.
- Due to new content being added, the line numbers were off.
- Also, turns out that `typos` was checking patch files. This turned
into a CI error, so I disabled that too. Patches shouldn't really be
modified manually, the original source should be. (Also it was erroring
on the commit hash.)
## Testing
- Test the new patch works by running `git apply
tools/example-showcase/asset-source-website.patch`.
- Verify the merge queue passes with the
`check-example-showcase-patches-still-work` job succeeding.
# Objective
- The report_details flag currently dumps everything at the root of the
repo which isn't ideal
- When running the tool locally it's useful to see the logs as they
appear
## Solution
- Add a flag to show the logs
- Write all the report files to a folder
# Objective
- Current config file is hard to extend
## Solution
- Instead of an hard coded list of field, the file now has a list of
`(frame, event)`, and will deal with know events (exiting or taking a
screenshot), or send an event for others that can be dealt by third
party plugins
# Objective
- #12755 introduced the need to download a file to run an example
- This means the example fails to run in CI without downloading that
file
## Solution
- Add a new metadata to examples "setup" that provides setup
instructions
- Replace the URL in the meshlet example to one that can actually be
downloaded
- example-showcase execute the setup before running an example
# Objective
- The [`version`] field in `Cargo.toml` is optional for crates not
published on <https://crates.io>.
- We have several `publish = false` tools in this repository that still
have a version field, even when it's not useful.
[`version`]:
https://doc.rust-lang.org/cargo/reference/manifest.html#the-version-field
## Solution
- Remove the [`version`] field for all crates where `publish = false`.
- Update the description on a few crates and remove extra newlines as
well.
# Objective
The current example showcase site URLs have white-space and caps in them
which looks ugly as an URL.
Fixes https://github.com/bevyengine/bevy-website/issues/736
## Solution
To fix this the example showcase tool now makes the category used for
the site sections lowercase, separated by a hyphen rather than
white-space, and without parentheses.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: vero <email@atlasdostal.com>
# Objective
The `example-showcase` command is failing to run.
```
cargo run --release -p example-showcase -- run --screenshot --in-ci
Updating crates.io index
Compiling example-showcase v0.14.0-dev (/Users/robparrett/src/bevy/tools/example-showcase)
Finished release [optimized] target(s) in 2.59s
Running `target/release/example-showcase run --screenshot --in-ci`
$ git apply --ignore-whitespace tools/example-showcase/remove-desktop-app-mode.patch
error: patch failed: crates/bevy_winit/src/winit_config.rs:29
error: crates/bevy_winit/src/winit_config.rs: patch does not apply
thread 'main' panicked at tools/example-showcase/src/main.rs:203:18:
called `Result::unwrap()` on an `Err` value: command exited with non-zero code `git apply --ignore-whitespace tools/example-showcase/remove-desktop-app-mode.patch`: 1
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
## Solution
Update `remove-desktop-app-mode.patch`.
# Objective
- `toml_edit` released a new patch that deprecates `Document`
- this warns when Bevy builds, and CI deny warns
## Solution
- fix deprecation warnings
Follow up to #11057
Implemented suggestions from reviewers from: a simpler
fit_canvas_to_parent leads to an explicit CSS setting to the canvas.
From my understanding, it has do be set after wgpu creation due to wgpu
overriding the canvas width/height:
4400a58470/examples/src/utils.rs (L68-L74)
# Changelog
- Re-enable a `fit_canvas_to_parent`, it's removal from
https://github.com/bevyengine/bevy/pull/11057 was problematic. Still,
its inner working is more simple than before: bevy doesn't handle its
resizing, winit does.
## Migration Guide
- Cancels the migration from
https://github.com/bevyengine/bevy/pull/11057
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Some workspace members do not inherit the global lints.
## Solution
- Add a `[lints]` entry for all files returned by `rg
--files-without-match -F "[lints]" **/Cargo.toml`, except the compile
failure tests since these aren't part of the workspace.
- Add some docstrings where needed.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Do #11829, but without breaking CI.
## Solution
Update to `toml_edit` v0.22, replace the deprecated function with the
the newer equivalent.
# Objective
- The
[`build-templated-pages`](4778fbeb65/tools/build-templated-pages)
tool is used to render the Markdown templates in the
[docs-template](4778fbeb65/docs-template)
folder.
- It depends on out outdated version of `toml_edit`.
## Solution
- Bump `toml_edit` to 0.21, disabling all features except `parse`.
# Objective
- After https://github.com/bevyengine/bevy/pull/11227, example showcase
timeouts
- `ReactiveLowPower` now can wait indefinitely depending on "platform
specifics"
## Solution
- Patch desktop mode in example showcase to use default mode which is
always `Continuous`
Improves #11052
# Changelog
- Remove `Window::fit_canvas_to_parent`, as its resizing on wasm now
respects its CSS configuration.
## Migration Guide
- Remove uses of `Window::fit_canvas_to_parent` in favor of CSS
properties, for example:
```css
canvas {
width: 100%;
height: 100%;
}
```
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
- Fix the asset hack for wasm examples so that they work on the website
- Use patches instead of sed for wasm hacks so that it fails explicitly
when they need to be updated
# Objective
- Examples with required features fail to build
- If you're fixing a specific issue, say "Fixes #X".
## Solution
- Pass them along when building examples for wasm showcase
- Also mark example `hot_asset_reloading` as not wasm compatible as it
isn't even with the right features enabled
# Objective
- Enable capturing screenshots of all examples in CI on a GitHub runner
## Solution
- Shorten duration of a run
- Disable `desktop_app` mode - as there isn't any input in CI, examples
using this take way too long to run
- Change the default `ClusterConfig` - the runner are not able to do all
the clusters with the default settings
- Send extra `WindowResized` events - this is needed only for the
`split_screen` example, because CI doesn't trigger that event unlike all
the other platforms
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Updates the requirements on [toml_edit](https://github.com/toml-rs/toml)
to permit the latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ed597ebad1"><code>ed597eb</code></a>
chore: Release</li>
<li><a
href="257a0fdc59"><code>257a0fd</code></a>
docs: Update changelog</li>
<li><a
href="4b44f53a31"><code>4b44f53</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/617">#617</a> from
epage/update</li>
<li><a
href="7eaf286110"><code>7eaf286</code></a>
fix(parser): Failed on mixed inline tables</li>
<li><a
href="e1f20378a2"><code>e1f2037</code></a>
test: Verify with latest data</li>
<li><a
href="2f9253c9eb"><code>2f9253c</code></a>
chore: Update toml-test</li>
<li><a
href="c9b481cab5"><code>c9b481c</code></a>
test(toml): Ensure tables are used for validation</li>
<li><a
href="43d7f29cfd"><code>43d7f29</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/615">#615</a> from
toml-rs/renovate/actions-checkout-4.x</li>
<li><a
href="ef9b8372c8"><code>ef9b837</code></a>
chore(deps): update actions/checkout action to v4</li>
<li><a
href="d308188db7"><code>d308188</code></a>
chore: Release</li>
<li>Additional commits viewable in <a
href="https://github.com/toml-rs/toml/compare/v0.19.0...v0.20.2">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- in #9168 I did some change to the showcase script, introducing the
notion of web api and setting the default Web API to webgl2
- that script was actually only called for webgpu example, so that
should have been the default value
# Objective
- Building all examples at once in CI takes too long
- Tool can only build for WebGPU
## Solution
- Add pagination to commands
- Add option to build examples for WebGL2
- Add option to build Zola files for WebGL2
# Objective
- Improve speed of loading examples on the website
- Triggered by https://news.ycombinator.com/item?id=35996393
## Solution
- Use wasm-opt to optimize files for size. This reduces the files from
22mb to 13mb
- Cloudflare doesn't set the correct `Content-Type` header by default
for wasm files, add it manually. This enables wasm streaming and
compression, dropping the transfer to 3.9mb
The files with this script are deployed on
optimized.wasm-pages.pages.dev if you want to test, you can replace this
URL on a website deployed locally.
# Objective
- Fix bad links in the WebGPU example page
## Solution
- Bevy website always add the trailing slash, keep the link relative by
removing the current folder from it
# Objective
- Replace the `example_showcase.sh` script
- Helper tool to prepare the example page on the website
## Solution
- Have a command to run all the examples: `cargo run -p example-showcase
-- run`
- Have a command to take screenshots of all examples: `cargo run -p
example-showcase -- run --screenshot`
- Have a command to build the markdown files for the website: `cargo run
-p example-showcase -- build-website-list --content-folder content`
- Have a command to build all the examples in wasm/WebGPU: `cargo run -p
example-showcase -- build-web-gpu-examples --content-folder webgpus`
(with `--website-hacks` to enable the hacks for the Bevy website: canvas
id, resizing and loading bar)
This is the first step to an improved example page (all examples marked
as wasm, uses the card layout, has screenshots, reuse name, category and
description from the metadata). As one of the goal is to have a page
with WebGPU examples before the official release, this is not touching
the example page for now but targeting a new one.
<img width="1912" alt="Screenshot 2023-05-06 at 17 16 25"
src="https://user-images.githubusercontent.com/8672791/236632744-4372c95f-c50a-4168-973f-349412548f33.png">
