# Objective
- Make the example deterministic when run with CI, so that the
[screenshot
comparison](https://thebevyflock.github.io/bevy-example-runner/) is
stable
- Preserve the "truly random on each run" behavior so that every page
load in the example showcase shows a different contributor first
## Solution
- Fall back to the static default contributor list in CI
- Store contributors in a `Vec` so that we can show repeats of the
fallback contributor list, giving the appearance of lots of overlapping
contributors in CI
- Use a shared seeded RNG throughout the app
- Give contributor birds a `z` value so that their depth is stable
- Remove the shuffle, which was redundant because contributors are first
collected into a hashmap
- `chain` the systems so that the physics is deterministic from run to
run
## Testing
```bash
echo '(setup: (fixed_frame_time: Some(0.05)), events: [(100, Screenshot), (500, AppExit)])' > config.ron
CI_TESTING_CONFIG=config.ron cargo run --example contributors --features=bevy_ci_testing
mv screenshot-100.png screenshot-100-a.png
CI_TESTING_CONFIG=config.ron cargo run --example contributors --features=bevy_ci_testing
diff screenshot-100.png screenshot-100-a.png
```
## Alternatives
I'd also be fine with removing this example from the list of examples
that gets screenshot-tested in CI. Coverage from other 2d examples is
probably adequate.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Cleanup naming and docs, add missing migration guide after #15591
All text root nodes now use `Text` (UI) / `Text2d`.
All text readers/writers use `Text<Type>Reader`/`Text<Type>Writer`
convention.
---
## Migration Guide
Doubles as #15591 migration guide.
Text bundles (`TextBundle` and `Text2dBundle`) were removed in favor of
`Text` and `Text2d`.
Shared configuration fields were replaced with `TextLayout`, `TextFont`
and `TextColor` components.
Just `TextBundle`'s additional field turned into `TextNodeFlags`
component,
while `Text2dBundle`'s additional fields turned into `TextBounds` and
`Anchor` components.
Text sections were removed in favor of hierarchy-based approach.
For root text entities with `Text` or `Text2d` components, child
entities with `TextSpan` will act as additional text sections.
To still access text spans by index, use the new `TextUiReader`,
`Text2dReader` and `TextUiWriter`, `Text2dWriter` system parameters.
# Objective
The type `AssetLoadError` has `PartialEq` and `Eq` impls, which is
problematic due to the fact that the `AssetLoaderError` and
`AddAsyncError` variants lie in their impls: they will return `true` for
any `Box<dyn Error>` with the same `TypeId`, even if the actual value is
different. This can lead to subtle bugs if a user relies on the equality
comparison to ensure that two values are equal.
The same is true for `DependencyLoadState`,
`RecursiveDependencyLoadState`.
More generally, it is an anti-pattern for large error types involving
dynamic dispatch, such as `AssetLoadError`, to have equality
comparisons. Directly comparing two errors for equality is usually not
desired -- if some logic needs to branch based on the value of an error,
it is usually more correct to check for specific variants and inspect
their fields.
As far as I can tell, the only reason these errors have equality
comparisons is because the `LoadState` enum wraps `AssetLoadError` for
its `Failed` variant. This equality comparison is only used to check for
`== LoadState::Loaded`, which we can easily replace with an `is_loaded`
method.
## Solution
Remove the `{Partial}Eq` impls from `LoadState`, which also allows us to
remove it from the error types.
## Migration Guide
The types `bevy_asset::AssetLoadError` and `bevy_asset::LoadState` no
longer support equality comparisons. If you need to check for an asset's
load state, consider checking for a specific variant using
`LoadState::is_loaded` or the `matches!` macro. Similarly, consider
using the `matches!` macro to check for specific variants of the
`AssetLoadError` type if you need to inspect the value of an asset load
error in your code.
`DependencyLoadState` and `RecursiveDependencyLoadState` are not
released yet, so no migration needed,
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
- closes#15866
## Solution
- Simply migrate where possible.
## Testing
- Expect that CI will do most of the work. Examples is another way of
testing this, as most of the work is in that area.
---
## Notes
For now, this PR doesn't migrate `QueryState::single` and friends as for
now, this look like another issue. So for example, QueryBuilders that
used single or `World::query` that used single wasn't migrated. If there
is a easy way to migrate those, please let me know.
Most of the uses of `Query::single` were removed, the only other uses
that I found was related to tests of said methods, so will probably be
removed when we remove `Query::single`.
# Objective
- Required components replace bundles, but `SpatialBundle` is yet to be
deprecated
## Solution
- Deprecate `SpatialBundle`
- Insert `Transform` and `Visibility` instead in examples using it
- In `spawn` or `insert` inserting a default `Transform` or `Visibility`
with component already requiring either, remove those components from
the tuple
## Testing
- Did you test these changes? If so, how?
Yes, I ran the examples I changed and tests
- Are there any parts that need more testing?
The `gamepad_viewer` and and `custom_shader_instancing` examples don't
work as intended due to entirely unrelated code, didn't check main.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Run examples, or just check that all spawned values are identical
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Linux, wayland trough x11 (cause that's the default feature)
---
## Migration Guide
`SpatialBundle` is now deprecated, insert `Transform` and `Visibility`
instead which will automatically insert all other components that were
in the bundle. If you do not specify these values and any other
components in your `spawn`/`insert` call already requires either of
these components you can leave that one out.
before:
```rust
commands.spawn(SpatialBundle::default());
```
after:
```rust
commands.spawn((Transform::default(), Visibility::default());
```
# Objective
Currently text is recomputed unnecessarily on any changes to its color,
which is extremely expensive.
## Solution
Split up `TextStyle` into two separate components `TextFont` and
`TextColor`.
## Testing
I added this system to `many_buttons`:
```rust
fn set_text_colors_changed(mut colors: Query<&mut TextColor>) {
for mut text_color in colors.iter_mut() {
text_color.set_changed();
}
}
```
reports ~4fps on main, ~50fps with this PR.
## Migration Guide
`TextStyle` has been renamed to `TextFont` and its `color` field has
been moved to a separate component named `TextColor` which newtypes
`Color`.
# Objective
Since #15641, `loading_screen` panics.
```
called `Result::unwrap()` on an `Err` value: MultipleEntities("bevy_ecs::query::state::QueryState<&mut bevy_render::view::visibility::Visibility, bevy_ecs::query::filter::With<loading_screen::LoadingScreen>>")
```
Before that PR, the camera did not have a `Visibility` component. But
`Visibility` is now a required component of `Camera`. So the query
matches multiple entities.
## Solution
Minimal change to make the example behave like it used to.
Plus a tiny drive-by cleanup to remove a redundant unwrap.
## Testing
`cargo run --example loading_screen`
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Continue migration of bevy APIs to required components, following
guidance of https://hackmd.io/@bevy/required_components/
## Solution
- Make `Sprite` require `Transform` and `Visibility` and
`SyncToRenderWorld`
- move image and texture atlas handles into `Sprite`
- deprecate `SpriteBundle`
- remove engine uses of `SpriteBundle`
## Testing
ran cargo tests on bevy_sprite and tested several sprite examples.
---
## Migration Guide
Replace all uses of `SpriteBundle` with `Sprite`. There are several new
convenience constructors: `Sprite::from_image`,
`Sprite::from_atlas_image`, `Sprite::from_color`.
WARNING: use of `Handle<Image>` and `TextureAtlas` as components on
sprite entities will NO LONGER WORK. Use the fields on `Sprite` instead.
I would have removed the `Component` impls from `TextureAtlas` and
`Handle<Image>` except it is still used within ui. We should fix this
moving forward with the migration.
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
What's that? Another PR for the grand migration to required components?
This time, audio!
## Solution
Deprecate `AudioSourceBundle`, `AudioBundle`, and `PitchBundle`, as per
the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2Fzxgp-zMMRUCdT7LY1ZDQwQ).
However, we cannot call the component `AudioSource`, because that's what
the stored asset is called. I deliberated on a few names, like
`AudioHandle`, or even just `Audio`, but landed on `AudioPlayer`, since
it's probably the most accurate and "nice" name for this. Open to
alternatives though.
---
## Migration Guide
Replace all insertions of `AudioSoucreBundle`, `AudioBundle`, and
`PitchBundle` with the `AudioPlayer` component. The other components
required by it will now be inserted automatically.
In cases where the generics cannot be inferred, you may need to specify
them explicitly. For example:
```rust
commands.spawn(AudioPlayer::<AudioSource>(asset_server.load("sounds/sick_beats.ogg")));
```
# Objective
A step in the migration to required components: scenes!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2FPJtNGVMMQhyM0zIvCJSkbA):
- Deprecate `SceneBundle` and `DynamicSceneBundle`.
- Add `SceneRoot` and `DynamicSceneRoot` components, which wrap a
`Handle<Scene>` and `Handle<DynamicScene>` respectively.
## Migration Guide
Asset handles for scenes and dynamic scenes must now be wrapped in the
`SceneRoot` and `DynamicSceneRoot` components. Raw handles as components
no longer spawn scenes.
Additionally, `SceneBundle` and `DynamicSceneBundle` have been
deprecated. Instead, use the scene components directly.
Previously:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn(SceneBundle {
scene: model_scene,
transform: Transform::from_xyz(-4.0, 0.0, -3.0),
..default()
});
```
Now:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn((
SceneRoot(model_scene),
Transform::from_xyz(-4.0, 0.0, -3.0),
));
```
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Another step in the migration to required components: lights!
Note that this does not include `EnvironmentMapLight` or reflection
probes yet, because their API hasn't been fully chosen yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FLLnzwz9XTxiD7i2jiUXkJg):
- Deprecate `PointLightBundle` in favor of the `PointLight` component
- Deprecate `SpotLightBundle` in favor of the `PointLight` component
- Deprecate `DirectionalLightBundle` in favor of the `DirectionalLight`
component
## Testing
I ran some examples with lights.
---
## Migration Guide
`PointLightBundle`, `SpotLightBundle`, and `DirectionalLightBundle` have
been deprecated. Use the `PointLight`, `SpotLight`, and
`DirectionalLight` components instead. Adding them will now insert the
other components required by them automatically.
# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Fixes#15079 , repairing the `game_menu` example
## Solution
- Changed the target component for the color updates from `UiImage` to
`BackgroundColor`.
- Changed the width of the `button_style` to `300px` to prevent overlap
with the text.
## Testing
Checked that buttons now correctly update their background color on
hover/exit/press.
---
## Showcase
https://github.com/user-attachments/assets/8f7ede9b-c271-4b59-91f9-27d9e3db1429
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14593.
## Solution
- Add `ViewportConversionError` and return it from viewport conversion
methods on Camera.
## Testing
- I successfully compiled and ran all changed examples.
## Migration Guide
The following methods on `Camera` now return a `Result` instead of an
`Option` so that they can provide more information about failures:
- `world_to_viewport`
- `world_to_viewport_with_depth`
- `viewport_to_world`
- `viewport_to_world_2d`
Call `.ok()` on the `Result` to turn it back into an `Option`, or handle
the `Result` directly.
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Fixes#14883
## Solution
Pretty simple update to `EntityCommands` methods to consume `self` and
return it rather than taking `&mut self`. The things probably worth
noting:
* I added `#[allow(clippy::should_implement_trait)]` to the `add` method
because it causes a linting conflict with `std::ops::Add`.
* `despawn` and `log_components` now return `Self`. I'm not sure if
that's exactly the desired behavior so I'm happy to adjust if that seems
wrong.
## Testing
Tested with `cargo run -p ci`. I think that should be sufficient to call
things good.
## Migration Guide
The most likely migration needed is changing code from this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity.insert(DepthPrepass);
}
if normal_prepass {
entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
to this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity = entity.insert(DepthPrepass);
}
if normal_prepass {
entity = entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity = entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
as can be seen in several of the example code updates here. There will
probably also be instances where mutable `EntityCommands` vars no longer
need to be mutable.
# Objective
Fixes#14782
## Solution
Enable the lint and fix all upcoming hints (`--fix`). Also tried to
figure out the false-positive (see review comment). Maybe split this PR
up into multiple parts where only the last one enables the lint, so some
can already be merged resulting in less many files touched / less
potential for merge conflicts?
Currently, there are some cases where it might be easier to read the
code with the qualifier, so perhaps remove the import of it and adapt
its cases? In the current stage it's just a plain adoption of the
suggestions in order to have a base to discuss.
## Testing
`cargo clippy` and `cargo run -p ci` are happy.
# Objective
- Add custom images as cursors
- Fixes#9557
## Solution
- Change cursor type to accommodate both native and image cursors
- I don't really like this solution because I couldn't use
`Handle<Image>` directly. I would need to import `bevy_assets` and that
causes a circular dependency. Alternatively we could use winit's
`CustomCursor` smart pointers, but that seems hard because the event
loop is needed to create those and is not easily accessable for users.
So now I need to copy around rgba buffers which is sad.
- I use a cache because especially on the web creating cursor images is
really slow
- Sorry to #14196 for yoinking, I just wanted to make a quick solution
for myself and thought that I should probably share it too.
Update:
- Now uses `Handle<Image>`, reads rgba data in `bevy_render` and uses
resources to send the data to `bevy_winit`, where the final cursors are
created.
## Testing
- Added example which works fine at least on Linux Wayland (winit side
has been tested with all platforms).
- I haven't tested if the url cursor works.
## Migration Guide
- `CursorIcon` is no longer a field in `Window`, but a separate
component can be inserted to a window entity. It has been changed to an
enum that can hold custom images in addition to system icons.
- `Cursor` is renamed to `CursorOptions` and `cursor` field of `Window`
is renamed to `cursor_options`
- `CursorIcon` is renamed to `SystemCursorIcon`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
In Bevy 0.13, `BackgroundColor` simply tinted the image of any
`UiImage`. This was confusing: in every other case (e.g. Text), this
added a solid square behind the element. #11165 changed this, but
removed `BackgroundColor` from `ImageBundle` to avoid confusion, since
the semantic meaning had changed.
However, this resulted in a serious UX downgrade / inconsistency, as
this behavior was no longer part of the bundle (unlike for `TextBundle`
or `NodeBundle`), leaving users with a relatively frustrating upgrade
path.
Additionally, adding both `BackgroundColor` and `UiImage` resulted in a
bizarre effect, where the background color was seemingly ignored as it
was covered by a solid white placeholder image.
Fixes#13969.
## Solution
Per @viridia's design:
> - if you don't specify a background color, it's transparent.
> - if you don't specify an image color, it's white (because it's a
multiplier).
> - if you don't specify an image, no image is drawn.
> - if you specify both a background color and an image color, they are
independent.
> - the background color is drawn behind the image (in whatever pixels
are transparent)
As laid out by @benfrankel, this involves:
1. Changing the default `UiImage` to use a transparent texture but a
pure white tint.
2. Adding `UiImage::solid_color` to quickly set placeholder images.
3. Changing the default `BorderColor` and `BackgroundColor` to
transparent.
4. Removing the default overrides for these values in the other assorted
UI bundles.
5. Adding `BackgroundColor` back to `ImageBundle` and `ButtonBundle`.
6. Adding a 1x1 `Image::transparent`, which can be accessed from
`Assets<Image>` via the `TRANSPARENT_IMAGE_HANDLE` constant.
Huge thanks to everyone who helped out with the design in the linked
issue and [the Discord
thread](https://discord.com/channels/691052431525675048/1255209923890118697/1255209999278280844):
this was very much a joint design.
@cart helped me figure out how to set the UiImage's default texture to a
transparent 1x1 image, which is a much nicer fix.
## Testing
I've checked the examples modified by this PR, and the `ui` example as
well just to be sure.
## Migration Guide
- `BackgroundColor` no longer tints the color of images in `ImageBundle`
or `ButtonBundle`. Set `UiImage::color` to tint images instead.
- The default texture for `UiImage` is now a transparent white square.
Use `UiImage::solid_color` to quickly draw debug images.
- The default value for `BackgroundColor` and `BorderColor` is now
transparent. Set the color to white manually to return to previous
behavior.
# Objective
- Followup to #13548
- It added a list of all possible labels to documentation. This seems
hard to keep up and doesn't stop people from making spelling mistake
## Solution
- Add an enum that can create all the labels possible, and encourage its
use rather than manually typed labels
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- The default font size is too small to be useful in examples or for
debug text.
- Fixes#13587
## Solution
- Updated the default font size value in `TextStyle` from 12px to 24px.
- Resorted to Text defaults in examples to use the default font size in
most of them.
## Testing
- WIP
---
## Migration Guide
- The default font size has been increased to 24px from 12px. Make sure
you set the font to the appropriate values in places you were using
`Default` text style.
# Objective
Closes#13017.
## Solution
- Make `AppExit` a enum with a `Success` and `Error` variant.
- Make `App::run()` return a `AppExit` if it ever returns.
- Make app runners return a `AppExit` to signal if they encountered a
error.
---
## Changelog
### Added
- [`App::should_exit`](https://example.org/)
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
to the `bevy` and `bevy_app` preludes,
### Changed
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
is now a enum with 2 variants (`Success` and `Error`).
- The app's [runner
function](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.set_runner)
now has to return a `AppExit`.
-
[`App::run()`](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.run)
now also returns the `AppExit` produced by the runner function.
## Migration Guide
- Replace all usages of
[`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
with `AppExit::Success` or `AppExit::Failure`.
- Any custom app runners now need to return a `AppExit`. We suggest you
return a `AppExit::Error` if any `AppExit` raised was a Error. You can
use the new [`App::should_exit`](https://example.org/) method.
- If not exiting from `main` any other way. You should return the
`AppExit` from `App::run()` so the app correctly returns a error code if
anything fails e.g.
```rust
fn main() -> AppExit {
App::new()
//Your setup here...
.run()
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Allows the user to select a scene to load, then a loading screen is
shown until all assets are loaded, and pipelines compiled.
# Objective
- Fixes#12654
## Solution
- Add desired assets to be monitored to a list.
- While there are assets that are not fully loaded, show a loading
screen.
- Once all assets are loaded, and pipelines compiled, show the scene
that was loaded.
# Objective
Fix#11931
## Solution
- Make stepping a non-default feature
- Adjust documentation and examples
- In particular, make the breakout example not show the stepping prompt
if compiled without the feature (shows a log message instead)
---
## Changelog
- Removed `bevy_debug_stepping` from default features
## Migration Guide
The system-by-system stepping feature is now disabled by default; to use
it, enable the `bevy_debug_stepping` feature explicitly:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_debug_stepping"] }
```
Code using
[`Stepping`](https://docs.rs/bevy/latest/bevy/ecs/schedule/struct.Stepping.html)
will still compile with the feature disabled, but will print a runtime
error message to the console if the application attempts to enable
stepping.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- As @james7132 said [on
Discord](https://discord.com/channels/691052431525675048/692572690833473578/1224626740773523536),
the `close_on_esc` system is forcing `bevy_window` to depend on
`bevy_input`.
- `close_on_esc` is not likely to be used in production, so it arguably
does not have a place in `bevy_window`.
## Solution
- As suggested by @afonsolage, move `close_on_esc` into
`bevy_dev_tools`.
- Add an example to the documentation too.
- Remove `bevy_window`'s dependency on `bevy_input`.
- Add `bevy_reflect`'s `smol_str` feature to `bevy_window` because it
was implicitly depended upon with `bevy_input` before it was removed.
- Remove any usage of `close_on_esc` from the examples.
- `bevy_dev_tools` is not enabled by default. I personally find it
frustrating to run examples with additional features, so I opted to
remove it entirely.
- This is up for discussion if you have an alternate solution.
---
## Changelog
- Moved `bevy_window::close_on_esc` to `bevy_dev_tools::close_on_esc`.
- Removed usage of `bevy_dev_tools::close_on_esc` from all examples.
## Migration Guide
`bevy_window::close_on_esc` has been moved to
`bevy_dev_tools::close_on_esc`. You will first need to enable
`bevy_dev_tools` as a feature in your `Cargo.toml`:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_dev_tools"] }
```
Finally, modify any imports to use `bevy_dev_tools` instead:
```rust
// Old:
// use bevy:🪟:close_on_esc;
// New:
use bevy::dev_tools::close_on_esc;
App::new()
.add_systems(Update, close_on_esc)
// ...
.run();
```
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
Fixes issue #12613 - the RNG used in examples is _deterministic_, but
its implementation is not _portable_ across platforms. We want to switch
to using a portable RNG that does not vary across platforms, to ensure
certain examples play out the same way every time.
## Solution
Replace all occurences of `rand::rngs::StdRng` with
`rand_chacha::ChaCha8Rng`, as recommended in issue #12613
---
## Changelog
- Add `rand_chacha` as a new dependency (controversial?)
- Replace all occurences of `rand::rngs::StdRng` with
`rand_chacha::ChaCha8Rng`
# Objective
- Make example alien_cake_addict deterministic so that it's easier to
check for regression
## Solution
- Use a seeded random
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- Improve the code quality of the breakout example
- As a newcomer to `bevy` I was pointed to the breakout example after
the "Getting Started" tutorial
- I'm making this PR because it had a few wrong comments + some
inconsistency in used patterns
## Solution
- Remove references to `wall` in all the collision code as it also
handles bricks and the paddle
- Use the newtype pattern with `bevy::prelude::Deref` for resources
- It was already used for `Velocity` before this PR
- `Scoreboard` is a resource only containing `score`, so it's simpler as
a newtype `Score` resource
- `CollisionSound` is already a newtype, so might as well unify the
access pattern for it
- Added docstrings for `WallLocation::position` and `WallLocation::size`
to explain what they represent
# Objective
Scaling `z` by anything but `1.0` in 2d can only lead to bugs and
confusion. See #4149.
## Solution
Use a `Vec2` for the paddle size const, and add a scale of `1.0` later.
This matches the way `BRICK_SIZE` is defined.
# Objective
Make bevy_utils less of a compilation bottleneck. Tackle #11478.
## Solution
* Move all of the directly reexported dependencies and move them to
where they're actually used.
* Remove the UUID utilities that have gone unused since `TypePath` took
over for `TypeUuid`.
* There was also a extraneous bytemuck dependency on `bevy_core` that
has not been used for a long time (since `encase` became the primary way
to prepare GPU buffers).
* Remove the `all_tuples` macro reexport from bevy_ecs since it's
accessible from `bevy_utils`.
---
## Changelog
Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax,
smallvec, and thiserror).
Removed: bevy_core's reexports of bytemuck.
## Migration Guide
bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror
have been removed.
bevy_core' reexports of bytemuck's types has been removed.
Add them as dependencies in your own crate instead.
# Objective
- We must have googly eyes.
- Also it would be nice if there was an example of a desk toy
application (like the old NEKO.EXE).
## Solution
- Created an example with googly eyed Bevy logo under
examples/games/desktoy.rs.
---
## Changelog
- Added "Desk Toy" game example showcasing window transparency and hit
test.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Fixes#12225
Prior to the `bevy_color` port, `GREEN` used to mean "full green." But
it is now a much darker color matching the css1 spec.
## Solution
Change usages of `basic::GREEN` or `css::GREEN` to `LIME` to restore the
examples to their former colors.
This also removes the duplicate definition of `GREEN` from `css`. (it
was already re-exported from `basic`)
## Note
A lot of these examples could use nicer colors. I'm not trying to do
that here.
"Dark Grey" will be tackled separately and has its own tracking issue.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/11157.
## Solution
Stop using `BackgroundColor` as a color tint for `UiImage`. Add a
`UiImage::color` field for color tint instead. Allow a UI node to
simultaneously include a solid-color background and an image, with the
image rendered on top of the background (this is already how it works
for e.g. text).
---
## Changelog
- The `BackgroundColor` component now renders a solid-color background
behind `UiImage` instead of tinting its color.
- Removed `BackgroundColor` from `ImageBundle`, `AtlasImageBundle`, and
`ButtonBundle`.
- Added `UiImage::color`.
- Expanded `RenderUiSystem` variants.
- Renamed `bevy_ui::extract_text_uinodes` to `extract_uinodes_text` for
consistency.
## Migration Guide
- `BackgroundColor` no longer tints the color of UI images. Use
`UiImage::color` for that instead.
- For solid color buttons, replace `ButtonBundle { background_color:
my_color.into(), ... }` with `ButtonBundle { image:
UiImage::default().with_color(my_color), ... }`, and update button
interaction systems to use `UiImage::color` instead of `BackgroundColor`
as well.
- `bevy_ui::RenderUiSystem::ExtractNode` has been split into
`ExtractBackgrounds`, `ExtractImages`, `ExtractBorders`, and
`ExtractText`.
- `bevy_ui::extract_uinodes` has been split into
`bevy_ui::extract_uinode_background_colors` and
`bevy_ui::extract_uinode_images`.
- `bevy_ui::extract_text_uinodes` has been renamed to
`extract_uinode_text`.
This is an implementation within `bevy_window::window` that fixes
#12229.
# Objective
Fixes#12229, allow users to retrieve the window's size and physical
size as Vectors without having to manually construct them using
`height()` and `width()` or `physical_height()` and `physical_width()`
## Solution
As suggested in #12229, created two public functions within `window`:
`size() -> Vec` and `physical_size() -> UVec` that return the needed
Vectors ready-to-go.
### Discussion
My first FOSS PRQ ever, so bear with me a bit. I'm new to this.
- I replaced instances of ```Vec2::new(window.width(),
window.height());``` or `UVec2::new(window.physical_width(),
window.physical_height());` within bevy examples be replaced with their
`size()`/`physical_size()` counterparts?
- Discussion within #12229 still holds: should these also be added to
WindowResolution?
# Objective / Solution
- Use `Hsla` for the color constants (Fixes#12203)
And a few other improvements:
- Make contributor colors persistent between runs
- Move text to top left where the birbs can't reach and add padding
- Remove `Contributor:` text. It's obvious what is being shown from
context, and then we can remove `has_triggered`.
- Show the number of commits authored
- Some system names were postfixed with `_system` and some weren't.
Removed `_system` for consistency.
- Clean up collision code slightly with a bounding volume
- Someone accidentally typed "bird" instead of "birb" in one comment.
- Other misc. cleanup
## Before
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/200550/9c6229d6-313a-464d-8a97-0220aa16901f">
## After
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/200550/0c00e95b-2f50-4f50-b177-def4ca405313">
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
After adding configurable exposure, we set the default ev100 value to
`7` (indoor). This brought us out of sync with Blender's configuration
and defaults. This PR changes the default to `9.7` (bright indoor or
very overcast outdoors), as I calibrated in #11577. This feels like a
very reasonable default.
The other changes generally center around tweaking Bevy's lighting
defaults and examples to play nicely with this number, alongside a few
other tweaks and improvements.
Note that for artistic reasons I have reverted some examples, which
changed to directional lights in #11581, back to point lights.
Fixes#11577
---
## Changelog
- Changed `Exposure::ev100` from `7` to `9.7` to better match Blender
- Renamed `ExposureSettings` to `Exposure`
- `Camera3dBundle` now includes `Exposure` for discoverability
- Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the
middle-to-top of those ranges instead of near the bottom
- Added new `AMBIENT_DAYLIGHT` constant and set that as the new
`DirectionalLight` default illuminance.
- `PointLight` and `SpotLight` now have a default `intensity` of
1,000,000 lumens. This makes them actually useful in the context of the
new "semi-outdoor" exposure and puts them in the "cinema lighting"
category instead of the "common household light" category. They are also
reasonably close to the Blender default.
- `AmbientLight` default has been bumped from `20` to `80`.
## Migration Guide
- The increased `Exposure::ev100` means that all existing 3D lighting
will need to be adjusted to match (DirectionalLights, PointLights,
SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust
the `Exposure::ev100` on your cameras to work nicely with your current
lighting values. If you are currently relying on default intensity
values, you might need to change the intensity to achieve the same
effect. Note that in Bevy 0.12, point/spot lights had a different hard
coded ev100 value than directional lights. In Bevy 0.13, they use the
same ev100, so if you have both in your scene, the _scale_ between these
light types has changed and you will likely need to adjust one or both
of them.
# Objective
#11431 and #11688 implemented meshing support for Bevy's new geometric
primitives. The next step is to deprecate the shapes in
`bevy_render::mesh::shape` and to later remove them completely for 0.14.
## Solution
Deprecate the shapes and reduce code duplication by utilizing the
primitive meshing API for the old shapes where possible.
Note that some shapes have behavior that can't be exactly reproduced
with the new primitives yet:
- `Box` is more of an AABB with min/max extents
- `Plane` supports a subdivision count
- `Quad` has a `flipped` property
These types have not been changed to utilize the new primitives yet.
---
## Changelog
- Deprecated all shapes in `bevy_render::mesh::shape`
- Changed all examples to use new primitives for meshing
## Migration Guide
Bevy has previously used rendering-specific types like `UVSphere` and
`Quad` for primitive mesh shapes. These have now been deprecated to use
the geometric primitives newly introduced in version 0.13.
Some examples:
```rust
let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0));
let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0));
let before = meshes.add(shape::Quad::default());
let after = meshes.add(Rectangle::default());
let before = meshes.add(shape::Plane::from_size(5.0));
// The surface normal can now also be specified when using `new`
let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0));
let before = meshes.add(
Mesh::try_from(shape::Icosphere {
radius: 0.5,
subdivisions: 5,
})
.unwrap(),
);
let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap());
```
# Objective
Add interactive system debugging capabilities to bevy, providing
step/break/continue style capabilities to running system schedules.
* Original implementation: #8063
- `ignore_stepping()` everywhere was too much complexity
* Schedule-config & Resource discussion: #8168
- Decided on selective adding of Schedules & Resource-based control
## Solution
Created `Stepping` Resource. This resource can be used to enable
stepping on a per-schedule basis. Systems within schedules can be
individually configured to:
* AlwaysRun: Ignore any stepping state and run every frame
* NeverRun: Never run while stepping is enabled
- this allows for disabling of systems while debugging
* Break: If we're running the full frame, stop before this system is run
Stepping provides two modes of execution that reflect traditional
debuggers:
* Step-based: Only execute one system at a time
* Continue/Break: Run all systems, but stop before running a system
marked as Break
### Demo
https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov
Breakout has been modified to use Stepping. The game runs normally for a
couple of seconds, then stepping is enabled and the game appears to
pause. A list of Schedules & Systems appears with a cursor at the first
System in the list. The demo then steps forward full frames using the
spacebar until the ball is about to hit a brick. Then we step system by
system as the ball impacts a brick, showing the cursor moving through
the individual systems. Finally the demo switches back to frame stepping
as the ball changes course.
### Limitations
Due to architectural constraints in bevy, there are some cases systems
stepping will not function as a user would expect.
#### Event-driven systems
Stepping does not support systems that are driven by `Event`s as events
are flushed after 1-2 frames. Although game systems are not running
while stepping, ignored systems are still running every frame, so events
will be flushed.
This presents to the user as stepping the event-driven system never
executes the system. It does execute, but the events have already been
flushed.
This can be resolved by changing event handling to use a buffer for
events, and only dropping an event once all readers have read it.
The work-around to allow these systems to properly execute during
stepping is to have them ignore stepping:
`app.add_systems(event_driven_system.ignore_stepping())`. This was done
in the breakout example to ensure sound played even while stepping.
#### Conditional Systems
When a system is stepped, it is given an opportunity to run. If the
conditions of the system say it should not run, it will not.
Similar to Event-driven systems, if a system is conditional, and that
condition is only true for a very small time window, then stepping the
system may not execute the system. This includes depending on any sort
of external clock.
This exhibits to the user as the system not always running when it is
stepped.
A solution to this limitation is to ensure any conditions are consistent
while stepping is enabled. For example, all systems that modify any
state the condition uses should also enable stepping.
#### State-transition Systems
Stepping is configured on the per-`Schedule` level, requiring the user
to have a `ScheduleLabel`.
To support state-transition systems, bevy generates needed schedules
dynamically. Currently it’s very difficult (if not impossible, I haven’t
verified) for the user to get the labels for these schedules.
Without ready access to the dynamically generated schedules, and a
resolution for the `Event` lifetime, **stepping of the state-transition
systems is not supported**
---
## Changelog
- `Schedule::run()` updated to consult `Stepping` Resource to determine
which Systems to run each frame
- Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting
`Schedule::set_label()` and `Schedule::label()` methods
- `Stepping` needed to know which `Schedule` was running, and prior to
this PR, `Schedule` didn't track its own label
- Would have preferred to add `Schedule::with_label()` and remove
`Schedule::new()`, but this PR touches enough already
- Added calls to `Schedule.set_label()` to `App` and `World` as needed
- Added `Stepping` resource
- Added `Stepping::begin_frame()` system to `MainSchedulePlugin`
- Run before `Main::run_main()`
- Notifies any `Stepping` Resource a new render frame is starting
## Migration Guide
- Add a call to `Schedule::set_label()` for any custom `Schedule`
- This is only required if the `Schedule` will be stepped
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#11479
## Solution
- Remove `collide_aabb.rs`
- Re-implement the example-specific collision code in the example,
taking advantage of the new `IntersectsVolume` trait.
## Changelog
- Removed `sprite::collide_aabb::collide` and
`sprite::collide_aabb::Collision`.
## Migration Guide
`sprite::collide_aabb::collide` and `sprite::collide_aabb::Collision`
were removed.
```rust
// Before
let collision = bevy::sprite::collide_aabb::collide(a_pos, a_size, b_pos, b_size);
if collision.is_some() {
// ...
}
// After
let collision = Aabb2d::new(a_pos.truncate(), a_size / 2.)
.intersects(&Aabb2d::new(b_pos.truncate(), b_size / 2.));
if collision {
// ...
}
```
If you were making use `collide_aabb::Collision`, see the new
`collide_with_side` function in the [`breakout`
example](https://bevyengine.org/examples/Games/breakout/).
## Discussion
As discussed in the linked issue, maybe we want to wait on `bevy_sprite`
generally making use of `Aabb2b` so users don't need to construct it
manually. But since they **do** need to construct the bounding circle
for the ball manually, this doesn't seem like a big deal to me.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
