# Objective
- The default font size is too small to be useful in examples or for
debug text.
- Fixes#13587
## Solution
- Updated the default font size value in `TextStyle` from 12px to 24px.
- Resorted to Text defaults in examples to use the default font size in
most of them.
## Testing
- WIP
---
## Migration Guide
- The default font size has been increased to 24px from 12px. Make sure
you set the font to the appropriate values in places you were using
`Default` text style.
# Objective
Unifies the naming convention between `StateTransitionEvent<S>` and
transition schedules.
## Migration Guide
- `StateTransitionEvent<S>` and `OnTransition<S>` schedule had their
fields renamed to `exited` and `entered` to match schedules.
# Objective
- In #13542 I broke example `color_grading`: the UI is not updated to
reflect changed camera settings
- Fixes#13590.
## Solution
- Update the UI when changing color grading
## Objective
Use the "standard" text size / placement for the new text in these
examples.
Continuation of an effort started here:
https://github.com/bevyengine/bevy/pull/8478
This is definitely not comprehensive. I did the ones that were easy to
find and relatively straightforward updates. I meant to just do
`3d_shapes` and `2d_shapes`, but one thing lead to another.
## Solution
Use `font_size: 20.0`, the default (built-in) font, `Color::WHITE`
(default), and `Val::Px(12.)` from the edges of the screen.
There are a few little drive-by cleanups of defaults not being used,
etc.
## Testing
Ran the changed examples, verified that they still look reasonable.
# Objective
- In particularly dark scenes, auto-exposure would lead to an unexpected
darkening of the view.
- Fixes#13446.
## Solution
The average luminance should default to something else than 0.0 instead,
when there are no samples. We set it to `settings.min_log_lum`.
## Testing
I was able to reproduce the problem on the `auto_exposure` example by
setting the point light intensity to 2000 and looking into the
right-hand corner. There was a sudden darkening.
Now, the discontinuity is gone.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Bram Buurlage <brambuurlage@gmail.com>
# Objective
- Fixes#13521
## Solution
Set `ambient_intensity` to 0.0 in volumetric_fog example.
I chose setting it explicitly over changing the default in order to make
it clear that this needs to be set depending on whether you have an
`EnvironmentMapLight`. See documentation for `ambient_intensity` and
related members.
## Testing
- Run the volumetric_fog example and notice how the light shown in
#13521 is not there anymore, as expected.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Small improvements on the `color_grading` example
## Solution
- Simplify button creation by creating them in the default state, the
selected one is automatically selected
- Don't update the UI if not needed
- Also invert the border of the selected button
- Simplify text update
# Objective
- Show + Visually Test that 3D primitive sampling works
- Make an example that looks nice.
## Solution
- Added a `sampling_primitives` examples which shows all the 3D
primitives being sampled, with a firefly aesthetic.
## Testing
- `cargo run --example sampling_primitives`
- Haven't tested WASM.
## Changelog
### Added
- Added a new example, `sampling_primitives`, to showcase all the 3D
sampleable primitives.
## Additional notes:
This example borrowed a bunch of code from the other sampling example,
by @mweatherley.
In future updates this example should be updated with new 3D primitives
as they become sampleable.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Fixes#13427.
## Solution
I changed the traits, and updated all usages.
## Testing
The `render_primitives` example still works perfectly.
---
## Changelog
- Made `gizmos.primitive_2d()` and `gizmos.primitive_3d()` take the
primitives by ref.
## Migration Guide
- Any usages of `gizmos.primitive_2d()` and/or `gizmos.primitive_3d()`
need to be updated to pass the primitive in by reference.
# Objective
We introduced a bunch of neat random sampling stuff in this release; we
should do a good job of showing people how to use it, and writing
examples is part of this.
## Solution
A new Math example, `random_sampling`, shows off the `ShapeSample` API
functionality. For the moment, it renders a cube and allows the user to
sample points from its interior or boundary in sets of either 1 or 100:
<img width="1440" alt="Screenshot 2024-05-25 at 1 16 08 PM"
src="https://github.com/bevyengine/bevy/assets/2975848/9cb6f53f-c89a-42c2-8907-b11d294c402a">
On the level of code, these are reflected by two ways of using
`ShapeSample`:
```rust
// Get a single random Vec3:
let sample: Vec3 = match *mode {
Mode::Interior => shape.0.sample_interior(rng),
Mode::Boundary => shape.0.sample_boundary(rng),
};
```
```rust
// Get 100 random Vec3s:
let samples: Vec<Vec3> = match *mode {
Mode::Interior => {
let dist = shape.0.interior_dist();
dist.sample_iter(&mut rng).take(100).collect()
}
Mode::Boundary => {
let dist = shape.0.boundary_dist();
dist.sample_iter(&mut rng).take(100).collect()
}
};
```
## Testing
Run the example!
## Discussion
Maybe in the future it would be nice to show off all of the different
shapes that we have implemented `ShapeSample` for, but I wanted to start
just by demonstrating the functionality. Here, I chose a cube because
it's simple and because it looks good rendered transparently with
backface culling disabled.
This commit, a revamp of #12959, implements screen-space reflections
(SSR), which approximate real-time reflections based on raymarching
through the depth buffer and copying samples from the final rendered
frame. This patch is a relatively minimal implementation of SSR, so as
to provide a flexible base on which to customize and build in the
future. However, it's based on the production-quality [raymarching code
by Tomasz
Stachowiak](https://gist.github.com/h3r2tic/9c8356bdaefbe80b1a22ae0aaee192db).
For a general basic overview of screen-space reflections, see
[1](https://lettier.github.io/3d-game-shaders-for-beginners/screen-space-reflection.html).
The raymarching shader uses the basic algorithm of tracing forward in
large steps, refining that trace in smaller increments via binary
search, and then using the secant method. No temporal filtering or
roughness blurring, is performed at all; for this reason, SSR currently
only operates on very shiny surfaces. No acceleration via the
hierarchical Z-buffer is implemented (though note that
https://github.com/bevyengine/bevy/pull/12899 will add the
infrastructure for this). Reflections are traced at full resolution,
which is often considered slow. All of these improvements and more can
be follow-ups.
SSR is built on top of the deferred renderer and is currently only
supported in that mode. Forward screen-space reflections are possible
albeit uncommon (though e.g. *Doom Eternal* uses them); however, they
require tracing from the previous frame, which would add complexity.
This patch leaves the door open to implementing SSR in the forward
rendering path but doesn't itself have such an implementation.
Screen-space reflections aren't supported in WebGL 2, because they
require sampling from the depth buffer, which Naga can't do because of a
bug (`sampler2DShadow` is incorrectly generated instead of `sampler2D`;
this is the same reason why depth of field is disabled on that
platform).
To add screen-space reflections to a camera, use the
`ScreenSpaceReflectionsBundle` bundle or the
`ScreenSpaceReflectionsSettings` component. In addition to
`ScreenSpaceReflectionsSettings`, `DepthPrepass` and `DeferredPrepass`
must also be present for the reflections to show up. The
`ScreenSpaceReflectionsSettings` component contains several settings
that artists can tweak, and also comes with sensible defaults.
A new example, `ssr`, has been added. It's loosely based on the
[three.js ocean
sample](https://threejs.org/examples/webgl_shaders_ocean.html), but all
the assets are original. Note that the three.js demo has no screen-space
reflections and instead renders a mirror world. In contrast to #12959,
this demo tests not only a cube but also a more complex model (the
flight helmet).
## Changelog
### Added
* Screen-space reflections can be enabled for very smooth surfaces by
adding the `ScreenSpaceReflections` component to a camera. Deferred
rendering must be enabled for the reflections to appear.
# Objective
- Create a new 2D primitive, Rhombus, also knows as "Diamond Shape"
- Simplify the creation and handling of isometric projections
- Extend Bevy's arsenal of 2D primitives
## Testing
- New unit tests created in bevy_math/ primitives and bev_math/ bounding
- Tested translations, rotations, wireframe, bounding sphere, aabb and
creation parameters
---------
Co-authored-by: Luís Figueiredo <luispcfigueiredo@tecnico.ulisboa.pt>
# Objective
The `ConicalFrustum` primitive should support meshing.
## Solution
Implement meshing for the `ConicalFrustum` primitive. The implementation
is nearly identical to `Cylinder` meshing, but supports two radii.
The default conical frustum is equivalent to a cone with a height of 1
and a radius of 0.5, truncated at half-height.
# Objective
This is just cleanup; we've got some more renderable gizmos and
primitives now that hadn't been added to this example, so let's add
them.
## Solution
In the `render_primitives` example:
- Added `Triangle3d` mesh
- Wrote `primitive_3d` gizmo impl for `Triangle3d` and added the gizmo
- Added `Tetrahedron` mesh and gizmo
I also made the 2d triangle bigger, since it was really small.
## Testing
You can just run the example to see that everything turned out all
right.
## Other
Feel free to let me know if there are other primitives that I missed;
I'm happy to tack them onto this PR.
# Objective
Adopted #11748
## Solution
I've rebased on main to fix the merge conflicts. ~~Not quite ready to
merge yet~~
* Clippy is happy and the tests are passing, but...
* ~~The new shapes in `examples/2d/2d_shapes.rs` don't look right at
all~~ Never mind, looks like radians and degrees just got mixed up at
some point?
* I have updated one doc comment based on a review in the original PR.
---------
Co-authored-by: Alexis "spectria" Horizon <spectria.limina@gmail.com>
Co-authored-by: Alexis "spectria" Horizon <118812919+spectria-limina@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Ben Harper <ben@tukom.org>
# Objective
Supercedes #12881 . Added a simple implementation that allows the user
to react to multiple asset loads both synchronously and asynchronously.
## Solution
Added `load_acquire`, that holds an item and drops it when loading is
finished or failed.
When used synchronously
Hold an `Arc<()>`, check for `Arc::strong_count() == 1` when all loading
completed.
When used asynchronously
Hold a `SemaphoreGuard`, await on `acquire_all` for completion.
This implementation has more freedom than the original in my opinion.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Allow the `Tetrahedron` primitive to be used for mesh generation. This
is part of ongoing work to bring unify the capabilities of `bevy_math`
primitives.
## Solution
`Tetrahedron` implements `Meshable`. Essentially, each face is just
meshed as a `Triangle3d`, but first there is an inversion step when the
signed volume of the tetrahedron is negative to ensure that the faces
all actually point outward.
## Testing
I loaded up some examples and hackily exchanged existing meshes with the
new one to see that it works as expected.
# Objective
- Fixes#13412
## Solution
- Renamed `segments` in `bevy_gizmos` to `resolution` and adjusted
examples
## Migration Guide
- When working with gizmos, replace all calls to `.segments(...)` with
`.resolution(...)`
# Objective
- Introduce variants of `LoadContext::load_direct` which allow picking
asset type & configuring settings.
- Fixes#12963.
## Solution
- Implements `ErasedLoadedAsset::downcast` and adds some accessors to
`LoadedAsset<A>`.
- Changes `load_direct`/`load_direct_with_reader` to be typed, and
introduces `load_direct_untyped`/`load_direct_untyped_with_reader`.
- Introduces `load_direct_with_settings` and
`load_direct_with_reader_and_settings`.
## Testing
- I've run cargo test and played with the examples which use
`load_direct`.
- I also extended the `asset_processing` example to use the new typed
version of `load_direct` and use `load_direct_with_settings`.
---
## Changelog
- Introduced new `load_direct` methods in `LoadContext` to allow
specifying type & settings
## Migration Guide
- `LoadContext::load_direct` has been renamed to
`LoadContext::load_direct_untyped`. You may find the new `load_direct`
is more appropriate for your use case (and the migration may only be
moving one type parameter).
- `LoadContext::load_direct_with_reader` has been renamed to
`LoadContext::load_direct_untyped_with_reader`.
---
This might not be an obvious win as a solution because it introduces
quite a few new `load_direct` alternatives - but it does follow the
existing pattern pretty well. I'm very open to alternatives.
😅
This commit makes us stop using the render world ECS for
`BinnedRenderPhase` and `SortedRenderPhase` and instead use resources
with `EntityHashMap`s inside. There are three reasons to do this:
1. We can use `clear()` to clear out the render phase collections
instead of recreating the components from scratch, allowing us to reuse
allocations.
2. This is a prerequisite for retained bins, because components can't be
retained from frame to frame in the render world, but resources can.
3. We want to move away from storing anything in components in the
render world ECS, and this is a step in that direction.
This patch results in a small performance benefit, due to point (1)
above.
## Changelog
### Changed
* The `BinnedRenderPhase` and `SortedRenderPhase` render world
components have been replaced with `ViewBinnedRenderPhases` and
`ViewSortedRenderPhases` resources.
## Migration Guide
* The `BinnedRenderPhase` and `SortedRenderPhase` render world
components have been replaced with `ViewBinnedRenderPhases` and
`ViewSortedRenderPhases` resources. Instead of querying for the
components, look the camera entity up in the
`ViewBinnedRenderPhases`/`ViewSortedRenderPhases` tables.
# Objective
As work on the editor starts to ramp up, it might be nice to start
allowing types to specify custom attributes. These can be used to
provide certain functionality to fields, such as ranges or controlling
how data is displayed.
A good example of this can be seen in
[`bevy-inspector-egui`](https://github.com/jakobhellermann/bevy-inspector-egui)
with its
[`InspectorOptions`](https://docs.rs/bevy-inspector-egui/0.22.1/bevy_inspector_egui/struct.InspectorOptions.html):
```rust
#[derive(Reflect, Default, InspectorOptions)]
#[reflect(InspectorOptions)]
struct Slider {
#[inspector(min = 0.0, max = 1.0)]
value: f32,
}
```
Normally, as demonstrated in the example above, these attributes are
handled by a derive macro and stored in a corresponding `TypeData`
struct (i.e. `ReflectInspectorOptions`).
Ideally, we would have a good way of defining this directly via
reflection so that users don't need to create and manage a whole proc
macro just to allow these sorts of attributes.
And note that this doesn't have to just be for inspectors and editors.
It can be used for things done purely on the code side of things.
## Solution
Create a new method for storing attributes on fields via the `Reflect`
derive.
These custom attributes are stored in type info (e.g. `NamedField`,
`StructInfo`, etc.).
```rust
#[derive(Reflect)]
struct Slider {
#[reflect(@0.0..=1.0)]
value: f64,
}
let TypeInfo::Struct(info) = Slider::type_info() else {
panic!("expected struct info");
};
let field = info.field("value").unwrap();
let range = field.get_attribute::<RangeInclusive<f64>>().unwrap();
assert_eq!(*range, 0.0..=1.0);
```
## TODO
- [x] ~~Bikeshed syntax~~ Went with a type-based approach, prefixed by
`@` for ease of parsing and flexibility
- [x] Add support for custom struct/tuple struct field attributes
- [x] Add support for custom enum variant field attributes
- [x] ~~Add support for custom enum variant attributes (maybe?)~~ ~~Will
require a larger refactor. Can be saved for a future PR if we really
want it.~~ Actually, we apparently still have support for variant
attributes despite not using them, so it was pretty easy to add lol.
- [x] Add support for custom container attributes
- [x] Allow custom attributes to store any reflectable value (not just
`Lit`)
- [x] ~~Store attributes in registry~~ This PR used to store these in
attributes in the registry, however, it has since switched over to
storing them in type info
- [x] Add example
## Bikeshedding
> [!note]
> This section was made for the old method of handling custom
attributes, which stored them by name (i.e. `some_attribute = 123`). The
PR has shifted away from that, to a more type-safe approach.
>
> This section has been left for reference.
There are a number of ways we can syntactically handle custom
attributes. Feel free to leave a comment on your preferred one! Ideally
we want one that is clear, readable, and concise since these will
potentially see _a lot_ of use.
Below is a small, non-exhaustive list of them. Note that the
`skip_serializing` reflection attribute is added to demonstrate how each
case plays with existing reflection attributes.
<details>
<summary>List</summary>
##### 1. `@(name = value)`
> The `@` was chosen to make them stand out from other attributes and
because the "at" symbol is a subtle pneumonic for "attribute". Of
course, other symbols could be used (e.g. `$`, `#`, etc.).
```rust
#[derive(Reflect)]
struct Slider {
#[reflect(@(min = 0.0, max = 1.0), skip_serializing)]
#[[reflect(@(bevy_editor::hint = "Range: 0.0 to 1.0"))]
value: f32,
}
```
##### 2. `@name = value`
> This is my personal favorite.
```rust
#[derive(Reflect)]
struct Slider {
#[reflect(@min = 0.0, @max = 1.0, skip_serializing)]
#[[reflect(@bevy_editor::hint = "Range: 0.0 to 1.0")]
value: f32,
}
```
##### 3. `custom_attr(name = value)`
> `custom_attr` can be anything. Other possibilities include `with` or
`tag`.
```rust
#[derive(Reflect)]
struct Slider {
#[reflect(custom_attr(min = 0.0, max = 1.0), skip_serializing)]
#[[reflect(custom_attr(bevy_editor::hint = "Range: 0.0 to 1.0"))]
value: f32,
}
```
##### 4. `reflect_attr(name = value)`
```rust
#[derive(Reflect)]
struct Slider {
#[reflect(skip_serializing)]
#[reflect_attr(min = 0.0, max = 1.0)]
#[[reflect_attr(bevy_editor::hint = "Range: 0.0 to 1.0")]
value: f32,
}
```
</details>
---
## Changelog
- Added support for custom attributes on reflected types (i.e.
`#[reflect(@Foo::new("bar")]`)
# Objective
- Fixes#13384 .
## Solution
- If the image became wider when copying from the texture to the buffer,
then the data is reduced to its original size when copying from the
buffer to the image.
## Testing
- Ran example with 1919x1080 resolution
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- in example `render_to_texture`, #13317 changed the comment on the
existing light saying lights don't work on multiple layers, then add a
light on multiple layers explaining that it will work. it's confusing
## Solution
- Keep the original light, with the updated comment
## Testing
- Run example `render_to_texture`, lighting is correct
# Objective
`parallax_mapping` and `deferred_rendering` both use a roundabout way of
manually overriding the srgbness of their normal map textures.
This can now be done with `load_with_settings` in one line of code.
## Solution
- Delete the override systems and use `load_with_settings` instead
- Make `deferred_rendering`'s instruction text style consistent with
other examples while I'm in there.
(see #8478)
## Testing
Tested by running with `load` instead of `load_settings` and confirming
that lighting looks bad when `is_srgb` is not configured, and good when
it is.
## Discussion
It would arguably make more sense to configure this in a `.meta` file,
but I used `load_with_settings` because that's how it was done in the
`clearcoat` example and it does seem nice for documentation purposes to
call this out explicitly in code.
This commit implements a more physically-accurate, but slower, form of
fog than the `bevy_pbr::fog` module does. Notably, this *volumetric fog*
allows for light beams from directional lights to shine through,
creating what is known as *light shafts* or *god rays*.
To add volumetric fog to a scene, add `VolumetricFogSettings` to the
camera, and add `VolumetricLight` to directional lights that you wish to
be volumetric. `VolumetricFogSettings` has numerous settings that allow
you to define the accuracy of the simulation, as well as the look of the
fog. Currently, only interaction with directional lights that have
shadow maps is supported. Note that the overhead of the effect scales
directly with the number of directional lights in use, so apply
`VolumetricLight` sparingly for the best results.
The overall algorithm, which is implemented as a postprocessing effect,
is a combination of the techniques described in [Scratchapixel] and
[this blog post]. It uses raymarching in screen space, transformed into
shadow map space for sampling and combined with physically-based
modeling of absorption and scattering. Bevy employs the widely-used
[Henyey-Greenstein phase function] to model asymmetry; this essentially
allows light shafts to fade into and out of existence as the user views
them.
Volumetric rendering is a huge subject, and I deliberately kept the
scope of this commit small. Possible follow-ups include:
1. Raymarching at a lower resolution.
2. A post-processing blur (especially useful when combined with (1)).
3. Supporting point lights and spot lights.
4. Supporting lights with no shadow maps.
5. Supporting irradiance volumes and reflection probes.
6. Voxel components that reuse the volumetric fog code to create voxel
shapes.
7. *Horizon: Zero Dawn*-style clouds.
These are all useful, but out of scope of this patch for now, to keep
things tidy and easy to review.
A new example, `volumetric_fog`, has been added to demonstrate the
effect.
## Changelog
### Added
* A new component, `VolumetricFog`, is available, to allow for a more
physically-accurate, but more resource-intensive, form of fog.
* A new component, `VolumetricLight`, can be placed on directional
lights to make them interact with `VolumetricFog`. Notably, this allows
such lights to emit light shafts/god rays.
[Scratchapixel]:
https://www.scratchapixel.com/lessons/3d-basic-rendering/volume-rendering-for-developers/intro-volume-rendering.html
[this blog post]: https://www.alexandre-pestana.com/volumetric-lights/
[Henyey-Greenstein phase function]:
https://www.pbr-book.org/4ed/Volume_Scattering/Phase_Functions#TheHenyeyndashGreensteinPhaseFunction
# Objective
Remove the limit of `RenderLayer` by using a growable mask using
`SmallVec`.
Changes adopted from @UkoeHB's initial PR here
https://github.com/bevyengine/bevy/pull/12502 that contained additional
changes related to propagating render layers.
Changes
## Solution
The main thing needed to unblock this is removing `RenderLayers` from
our shader code. This primarily affects `DirectionalLight`. We are now
computing a `skip` field on the CPU that is then used to skip the light
in the shader.
## Testing
Checked a variety of examples and did a quick benchmark on `many_cubes`.
There were some existing problems identified during the development of
the original pr (see:
https://discord.com/channels/691052431525675048/1220477928605749340/1221190112939872347).
This PR shouldn't change any existing behavior besides removing the
layer limit (sans the comment in migration about `all` layers no longer
being possible).
---
## Changelog
Removed the limit on `RenderLayers` by using a growable bitset that only
allocates when layers greater than 64 are used.
## Migration Guide
- `RenderLayers::all()` no longer exists. Entities expecting to be
visible on all layers, e.g. lights, should compute the active layers
that are in use.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
- Implement rounded cuboids and rectangles, suggestion of #9400
## Solution
- Added `Gizmos::rounded_cuboid`, `Gizmos::rounded_rect` and
`Gizmos::rounded_rect_2d`.
- All of these return builders that allow configuring of the corner/edge
radius using `.corner_radius(...)` or `.edge_radius(...)` as well as the
line segments of each arc using `.arc_segments(...)`.
---
## Changelog
- Added a new `rounded_box` module to `bevy_gizmos` containing all of
the above methods and builders.
- Updated the examples `2d_gizmos` and `3d_gizmos`
## Additional information
The 3d example now looks like this:
<img width="1440" alt="Screenshot 2024-02-28 at 01 47 28"
src="https://github.com/bevyengine/bevy/assets/62256001/654e30ca-c091-4f14-a402-90138e95c71b">
And this is the updated 2d example showcasing negative corner radius:
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 37"
src="https://github.com/bevyengine/bevy/assets/62256001/3904697a-5462-4ee7-abd9-3e893ca07082">
<img width="1440" alt="Screenshot 2024-02-28 at 01 59 47"
src="https://github.com/bevyengine/bevy/assets/62256001/a8892cfd-3aad-4c0c-87eb-559c17c8864c">
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: James Gayfer <10660608+jgayfer@users.noreply.github.com>
This commit implements the [depth of field] effect, simulating the blur
of objects out of focus of the virtual lens. Either the [hexagonal
bokeh] effect or a faster Gaussian blur may be used. In both cases, the
implementation is a simple separable two-pass convolution. This is not
the most physically-accurate real-time bokeh technique that exists;
Unreal Engine has [a more accurate implementation] of "cinematic depth
of field" from 2018. However, it's simple, and most engines provide
something similar as a fast option, often called "mobile" depth of
field.
The general approach is outlined in [a blog post from 2017]. We take
advantage of the fact that both Gaussian blurs and hexagonal bokeh blurs
are *separable*. This means that their 2D kernels can be reduced to a
small number of 1D kernels applied one after another, asymptotically
reducing the amount of work that has to be done. Gaussian blurs can be
accomplished by blurring horizontally and then vertically, while
hexagonal bokeh blurs can be done with a vertical blur plus a diagonal
blur, plus two diagonal blurs. In both cases, only two passes are
needed. Bokeh requires the first pass to have a second render target and
requires two subpasses in the second pass, which decreases its
performance relative to the Gaussian blur.
The bokeh blur is generally more aesthetically pleasing than the
Gaussian blur, as it simulates the effect of a camera more accurately.
The shape of the bokeh circles are determined by the number of blades of
the aperture. In our case, we use a hexagon, which is usually considered
specific to lower-quality cameras. (This is a downside of the fast
hexagon approach compared to the higher-quality approaches.) The blur
amount is generally specified by the [f-number], which we use to compute
the focal length from the film size and FOV. By default, we simulate
standard cinematic cameras of f/1 and [Super 35]. The developer can
customize these values as desired.
A new example has been added to demonstrate depth of field. It allows
customization of the mode (Gaussian vs. bokeh), focal distance and
f-numbers. The test scene is inspired by a [blog post on depth of field
in Unity]; however, the effect is implemented in a completely different
way from that blog post, and all the assets (textures, etc.) are
original.
Bokeh depth of field:
Gaussian depth of field:
No depth of field:
[depth of field]: https://en.wikipedia.org/wiki/Depth_of_field
[hexagonal bokeh]:
https://colinbarrebrisebois.com/2017/04/18/hexagonal-bokeh-blur-revisited/
[a more accurate implementation]:
https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
[a blog post from 2017]:
https://colinbarrebrisebois.com/2017/04/18/hexagonal-bokeh-blur-revisited/
[f-number]: https://en.wikipedia.org/wiki/F-number
[Super 35]: https://en.wikipedia.org/wiki/Super_35
[blog post on depth of field in Unity]:
https://catlikecoding.com/unity/tutorials/advanced-rendering/depth-of-field/
## Changelog
### Added
* A depth of field postprocessing effect is now available, to simulate
objects being out of focus of the camera. To use it, add
`DepthOfFieldSettings` to an entity containing a `Camera3d` component.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Bram Buurlage <brambuurlage@gmail.com>
# Objective
The `Cone` primitive should support meshing.
## Solution
Implement meshing for the `Cone` primitive. The default cone has a
height of 1 and a base radius of 0.5, and is centered at the origin.
An issue with cone meshes is that the tip does not really have a normal
that works, even with duplicated vertices. This PR uses only a single
vertex for the tip, with a normal of zero; this results in an "invalid"
normal that gets ignored by the fragment shader. This seems to be the
only approach we have for perfectly smooth cones. For discussion on the
topic, see #10298 and #5891.
Another thing to note is that the cone uses polar coordinates for the
UVs:
<img
src="https://github.com/bevyengine/bevy/assets/57632562/e101ded9-110a-4ac4-a98d-f1e4d740a24a"
alt="cone" width="400" />
This way, textures are applied as if looking at the cone from above:
<img
src="https://github.com/bevyengine/bevy/assets/57632562/8dea00f1-a283-4bc4-9676-91e8d4adb07a"
alt="texture" width="200" />
<img
src="https://github.com/bevyengine/bevy/assets/57632562/d9d1b5e6-a8ba-4690-b599-904dd85777a1"
alt="cone" width="200" />
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/12597
The current tracing customization option (the `update_subscriber` field)
was basically unusable because it provides a `dyn Subscriber` and most
layers require a `Subscriber` that also implements `for<'a>
LookupSpan<'a, Data=Data<'a>>`, so it was impossible to add a layer on
top of the `dyn Subscriber`.
This PR provides an alternative way of adding additional tracing layers
to the LogPlugin by instead creating an `Option<Layer>`.
This is enough for most situations because `Option<Layer>` and
`Vec<Layer>` both implement `Layer`.
## Solution
- Replace the `update_subscriber` field of `LogPlugin` with a
`custom_layer` field which is function pointer returning an
`Option<BoxedLayer>`
- Update the examples to showcase that this works:
- with multiple additional layers
- with Layers that were previously problematic, such as
`bevy::log::tracing_subscriber::fmt::layer().with_file(true)` (mentioned
in the issue)
Note that in the example this results in duplicate logs, since we have
our own layer on top of the default `fmt_layer` added in the LogPlugin;
maybe in the future we might want to provide a single one? Or to let the
user customize the default `fmt_layer` ? I still think this change is an
improvement upon the previous solution, which was basically broken.
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- The `LogPlugin`'s `update_subscriber` field has been replaced with
`custom_layer` to allow the user to flexibly add a `tracing::Layer` to
the layer stack
## Migration Guide
- The `LogPlugin`'s `update_subscriber` field has been replaced with
`custom_layer`
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
Fixes#13097 and other issues preventing the motion blur example from
working on wasm
## Solution
- Use a vec2 for padding
- Fix error initializing the `MotionBlur` struct on wasm+webgl2
- Disable MSAA on wasm+webgl2
- Fix `GlobalsUniform` padding getting added on the shader side for
webgpu builds
## Notes
The motion blur example now runs, but with artifacts. In addition to the
obvious black artifacts, the motion blur or dithering seem to just look
worse in a way I can't really describe. That may be expected.
```
AdapterInfo { name: "ANGLE (Apple, ANGLE Metal Renderer: Apple M1 Max, Unspecified Version)", vendor: 4203, device: 0, device_type: IntegratedGpu, driver: "", driver_info: "", backend: Gl }
```
<img width="1276" alt="Screenshot 2024-04-25 at 6 51 21 AM"
src="https://github.com/bevyengine/bevy/assets/200550/65401d4f-92fe-454b-9dbc-a2d89d3ad963">
# Objective
Extracts the state mechanisms into a new crate called "bevy_state".
This comes with a few goals:
- state wasn't really an inherent machinery of the ecs system, and so
keeping it within bevy_ecs felt forced
- by mixing it in with bevy_ecs, the maintainability of our more robust
state system was significantly compromised
moving state into a new crate makes it easier to encapsulate as it's own
feature, and easier to read and understand since it's no longer a
single, massive file.
## Solution
move the state-related elements from bevy_ecs to a new crate
## Testing
- Did you test these changes? If so, how? all the automated tests
migrated and passed, ran the pre-existing examples without changes to
validate.
---
## Migration Guide
Since bevy_state is now gated behind the `bevy_state` feature, projects
that use state but don't use the `default-features` will need to add
that feature flag.
Since it is no longer part of bevy_ecs, projects that use bevy_ecs
directly will need to manually pull in `bevy_state`, trigger the
StateTransition schedule, and handle any of the elements that bevy_app
currently sets up.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
Since `align` was introduced, it has been reworked to allow the input of
`Dir3` instead of `Vec3`, and we also introduced random sampling for
points on a sphere and then for `Dir3`. Previously, this example rolled
its own random generation, but it doesn't need to any more.
## Solution
Refactor the 'align' example to use `Dir3` instead of `Vec3`, using the
`bevy_math` API for random directions.
Switched the return type from `Vec3` to `Dir3` for directional axis
methods within the `GlobalTransform` component.
## Migration Guide
The `GlobalTransform` component's directional axis methods (e.g.,
`right()`, `left()`, `up()`, `down()`, `back()`, `forward()`) have been
updated from returning `Vec3` to `Dir3`.
Clearcoat is a separate material layer that represents a thin
translucent layer of a material. Examples include (from the [Filament
spec]) car paint, soda cans, and lacquered wood. This commit implements
support for clearcoat following the Filament and Khronos specifications,
marking the beginnings of support for multiple PBR layers in Bevy.
The [`KHR_materials_clearcoat`] specification describes the clearcoat
support in glTF. In Blender, applying a clearcoat to the Principled BSDF
node causes the clearcoat settings to be exported via this extension. As
of this commit, Bevy parses and reads the extension data when present in
glTF. Note that the `gltf` crate has no support for
`KHR_materials_clearcoat`; this patch therefore implements the JSON
semantics manually.
Clearcoat is integrated with `StandardMaterial`, but the code is behind
a series of `#ifdef`s that only activate when clearcoat is present.
Additionally, the `pbr_feature_layer_material_textures` Cargo feature
must be active in order to enable support for clearcoat factor maps,
clearcoat roughness maps, and clearcoat normal maps. This approach
mirrors the same pattern used by the existing transmission feature and
exists to avoid running out of texture bindings on platforms like WebGL
and WebGPU. Note that constant clearcoat factors and roughness values
*are* supported in the browser; only the relatively-less-common maps are
disabled on those platforms.
This patch refactors the lighting code in `StandardMaterial`
significantly in order to better support multiple layers in a natural
way. That code was due for a refactor in any case, so this is a nice
improvement.
A new demo, `clearcoat`, has been added. It's based on [the
corresponding three.js demo], but all the assets (aside from the skybox
and environment map) are my original work.
[Filament spec]:
https://google.github.io/filament/Filament.html#materialsystem/clearcoatmodel
[`KHR_materials_clearcoat`]:
https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_clearcoat/README.md
[the corresponding three.js demo]:
https://threejs.org/examples/webgl_materials_physical_clearcoat.html
## Changelog
### Added
* `StandardMaterial` now supports a clearcoat layer, which represents a
thin translucent layer over an underlying material.
* The glTF loader now supports the `KHR_materials_clearcoat` extension,
representing materials with clearcoat layers.
## Migration Guide
* The lighting functions in the `pbr_lighting` WGSL module now have
clearcoat parameters, if `STANDARD_MATERIAL_CLEARCOAT` is defined.
* The `R` reflection vector parameter has been removed from some
lighting functions, as it was unused.
# Objective
- In PR #12882 I added a new example which contained a comment with an
unfinished and cut off sentence. This wasn't caught until after the PR
was merged.
- This simply finishes that comment.
## Solution
- Finished the incomplete comment.
## Testing
- This is simply a comment change so no testing needed other than
reading it.
# Objective
Dynamic types can be tricky to understand and work with in bevy_reflect.
There should be an example that shows what they are and how they're
used.
## Solution
Add a `Dynamic Types` reflection example.
I'm planning to go through the reflection examples, adding new ones and
updating old ones. And I think this walkthrough style tends to work
best. Due to the amount of text and associated explanation, it might fit
better in a dedicated reflection chapter of the WIP Bevy Book. However,
I think it might be valuable to have some public-facing tutorials for
these concepts.
Let me know if there any thoughts or critiques with the example— both in
content and this overall structure!
## Testing
To test these changes, you can run the example locally:
```
cargo run --example dynamic_types
```
---
## Changelog
- Add `Dynamic Types` reflection example
# Objective
The `custom_loop` example didn't replicate the `app.finish` /
`app.cleanup` calls from the default runner; I discovered this when
trying to troubleshoot why my application with a custom loop wasn't
calling its plugin finalizers, and realised that the upstream example
that I'd referenced didn't have the relevant calls.
## Solution
Added the missing calls, replicating what the default runner does:
d390420093/crates/bevy_app/src/app.rs (L895-L896)
## Testing
I've confirmed that adding these two calls to my application fixed the
issue I was encountering. I haven't tested it within the example itself
as it's relatively straightforward and I didn't want to pollute the
example with a plugin using a finalizer.
# Objective
- Add auto exposure/eye adaptation to the bevy render pipeline.
- Support features that users might expect from other engines:
- Metering masks
- Compensation curves
- Smooth exposure transitions
This PR is based on an implementation I already built for a personal
project before https://github.com/bevyengine/bevy/pull/8809 was
submitted, so I wasn't able to adopt that PR in the proper way. I've
still drawn inspiration from it, so @fintelia should be credited as
well.
## Solution
An auto exposure compute shader builds a 64 bin histogram of the scene's
luminance, and then adjusts the exposure based on that histogram. Using
a histogram allows the system to ignore outliers like shadows and
specular highlights, and it allows to give more weight to certain areas
based on a mask.
---
## Changelog
- Added: AutoExposure plugin that allows to adjust a camera's exposure
based on it's scene's luminance.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
If the current example is used as is, the `button_pressed` system will
run every update.
Update the example so that it is a more ready to use for people
## Solution
Rewrote most of it.
Another solution would be to just minimally fix the problems
```Rust
.add_systems(Startup, (count_entities, setup).chain())
```
and
```Rust
fn evaluate_callbacks(query: Query<(Entity, &Callback), With<Triggered>>, mut commands: Commands) {
for (entity, callback) in query.iter() {
commands.run_system(callback.0);
commands.entity(entity).remove::<Triggered>();
}
}
```
## Testing
- Did you test these changes? If so, how?
Ran the example and pressed A / B on the keyboard
---
Implement visibility ranges, also known as hierarchical levels of detail
(HLODs).
This commit introduces a new component, `VisibilityRange`, which allows
developers to specify camera distances in which meshes are to be shown
and hidden. Hiding meshes happens early in the rendering pipeline, so
this feature can be used for level of detail optimization. Additionally,
this feature is properly evaluated per-view, so different views can show
different levels of detail.
This feature differs from proper mesh LODs, which can be implemented
later. Engines generally implement true mesh LODs later in the pipeline;
they're typically more efficient than HLODs with GPU-driven rendering.
However, mesh LODs are more limited than HLODs, because they require the
lower levels of detail to be meshes with the same vertex layout and
shader (and perhaps the same material) as the original mesh. Games often
want to use objects other than meshes to replace distant models, such as
*octahedral imposters* or *billboard imposters*.
The reason why the feature is called *hierarchical level of detail* is
that HLODs can replace multiple meshes with a single mesh when the
camera is far away. This can be useful for reducing drawcall count. Note
that `VisibilityRange` doesn't automatically propagate down to children;
it must be placed on every mesh.
Crossfading between different levels of detail is supported, using the
standard 4x4 ordered dithering pattern from [1]. The shader code to
compute the dithering patterns should be well-optimized. The dithering
code is only active when visibility ranges are in use for the mesh in
question, so that we don't lose early Z.
Cascaded shadow maps show the HLOD level of the view they're associated
with. Point light and spot light shadow maps, which have no CSMs,
display all HLOD levels that are visible in any view. To support this
efficiently and avoid doing visibility checks multiple times, we
precalculate all visible HLOD levels for each entity with a
`VisibilityRange` during the `check_visibility_range` system.
A new example, `visibility_range`, has been added to the tree, as well
as a new low-poly version of the flight helmet model to go with it. It
demonstrates use of the visibility range feature to provide levels of
detail.
[1]: https://en.wikipedia.org/wiki/Ordered_dithering#Threshold_map
[^1]: Unreal doesn't have a feature that exactly corresponds to
visibility ranges, but Unreal's HLOD system serves roughly the same
purpose.
## Changelog
### Added
* A new `VisibilityRange` component is available to conditionally enable
entity visibility at camera distances, with optional crossfade support.
This can be used to implement different levels of detail (LODs).
## Screenshots
High-poly model:
Low-poly model up close:
Crossfading between the two:
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- I've been using the `texture_binding_array` example as a base to use
multiple textures in meshes in my program
- I only realised once I was deep in render code that these helpers
existed to create layouts
- I wish I knew the existed earlier because the alternative (filling in
every struct field) is so much more verbose
## Solution
- Use `BindGroupLayoutEntries::with_indices` to teach users that the
helper exists
- Also fix typo which should be `texture_2d`.
## Alternatives considered
- Just leave it as is to teach users about every single struct field
- However, leaving as is leaves users writing roughly 29 lines versus
roughly 2 lines for 2 entries and I'd prefer the 2 line approach
## Testing
Ran the example locally and compared before and after.
Before:
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/135186256/f5897210-2560-4110-b92b-85497be9023c">
After:
<img width="1279" alt="image"
src="https://github.com/bevyengine/bevy/assets/135186256/8d13a939-b1ce-4a49-a9da-0b1779c8cb6a">
Co-authored-by: mgi388 <>
# Objective
- #12755 introduced the need to download a file to run an example
- This means the example fails to run in CI without downloading that
file
## Solution
- Add a new metadata to examples "setup" that provides setup
instructions
- Replace the URL in the meshlet example to one that can actually be
downloaded
- example-showcase execute the setup before running an example
# Objective
- Simplifies/clarifies the winit loop.
- Fixes#12612.
## Solution
The Winit loop runs following this flow:
* NewEvents
* Any number of other events, that can be 0, including RequestRedraw
* AboutToWait
Bevy also uses the UpdateMode, to define how the next loop has to run.
It can be essentially:
* Continuous, using ControlFlow::Wait for windowed apps, and
ControlFlow::Poll for windowless apps
* Reactive/ReactiveLowPower, using ControlFlow::WaitUntil with a
specific wait delay
The changes are made to follow this pattern, so that
* NewEvents define if the WaitUntil has been canceled because we
received a Winit event.
* AboutToWait:
* checks if the window has to be redrawn
* otherwise calls app.update() if the WaitUntil timeout has elapsed
* updates the ControlFlow accordingly
To make the code more logical:
* AboutToWait checks if any Bevy's RequestRedraw event has been emitted
* create_windows is run every cycle, at the beginning of the loop
* the ActiveState (that could be renamed ActivityState) is updated in
AboutToWait, symmetrically for WillSuspend/WillResume
* the AppExit events are checked every loop cycle, to exit the app early
## Platform-specific testing
- [x] Windows
- [x] MacOs
- [x] Linux (x11)
- [x] Linux (Wayland)
- [x] Android
- [x] iOS
- [x] WASM/WebGL2 (Chrome)
- [x] WASM/WebGL2 (Firefox)
- [x] WASM/WebGL2 (Safari)
- [x] WASM/WebGpu (Chrome)
---------
Co-authored-by: François <francois.mockers@vleue.com>
## Summary/Description
This PR extends states to allow support for a wider variety of state
types and patterns, by providing 3 distinct types of state:
- Standard [`States`] can only be changed by manually setting the
[`NextState<S>`] resource. These states are the baseline on which the
other state types are built, and can be used on their own for many
simple patterns. See the [state
example](https://github.com/bevyengine/bevy/blob/latest/examples/ecs/state.rs)
for a simple use case - these are the states that existed so far in
Bevy.
- [`SubStates`] are children of other states - they can be changed
manually using [`NextState<S>`], but are removed from the [`World`] if
the source states aren't in the right state. See the [sub_states
example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/sub_states.rs)
for a simple use case based on the derive macro, or read the trait docs
for more complex scenarios.
- [`ComputedStates`] are fully derived from other states - they provide
a [`compute`](ComputedStates::compute) method that takes in the source
states and returns their derived value. They are particularly useful for
situations where a simplified view of the source states is necessary -
such as having an `InAMenu` computed state derived from a source state
that defines multiple distinct menus. See the [computed state
example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/computed_states.rscomputed_states.rs)
to see a sampling of uses for these states.
# Objective
This PR is another attempt at allowing Bevy to better handle complex
state objects in a manner that doesn't rely on strict equality. While my
previous attempts (https://github.com/bevyengine/bevy/pull/10088 and
https://github.com/bevyengine/bevy/pull/9957) relied on complex matching
capacities at the point of adding a system to application, this one
instead relies on deterministically deriving simple states from more
complex ones.
As a result, it does not require any special macros, nor does it change
any other interactions with the state system once you define and add
your derived state. It also maintains a degree of distinction between
`State` and just normal application state - your derivations have to end
up being discreet pre-determined values, meaning there is less of a
risk/temptation to place a significant amount of logic and data within a
given state.
### Addition - Sub States
closes#9942
After some conversation with Maintainers & SMEs, a significant concern
was that people might attempt to use this feature as if it were
sub-states, and find themselves unable to use it appropriately. Since
`ComputedState` is mainly a state matching feature, while `SubStates`
are more of a state mutation related feature - but one that is easy to
add with the help of the machinery introduced by `ComputedState`, it was
added here as well. The relevant discussion is here:
https://discord.com/channels/691052431525675048/1200556329803186316
## Solution
closes#11358
The solution is to create a new type of state - one implementing
`ComputedStates` - which is deterministically tied to one or more other
states. Implementors write a function to transform the source states
into the computed state, and it gets triggered whenever one of the
source states changes.
In addition, we added the `FreelyMutableState` trait , which is
implemented as part of the derive macro for `States`. This allows us to
limit use of `NextState<S>` to states that are actually mutable,
preventing mis-use of `ComputedStates`.
---
## Changelog
- Added `ComputedStates` trait
- Added `FreelyMutableState` trait
- Converted `NextState` resource to an Enum, with `Unchanged` and
`Pending`
- Added `App::add_computed_state::<S: ComputedStates>()`, to allow for
easily adding derived states to an App.
- Moved the `StateTransition` schedule label from `bevy_app` to
`bevy_ecs` - but maintained the export in `bevy_app` for continuity.
- Modified the process for updating states. Instead of just having an
`apply_state_transition` system that can be added anywhere, we now have
a multi-stage process that has to run within the `StateTransition`
label. First, all the state changes are calculated - manual transitions
rely on `apply_state_transition`, while computed transitions run their
computation process before both call `internal_apply_state_transition`
to apply the transition, send out the transition event, trigger
dependent states, and record which exit/transition/enter schedules need
to occur. Once all the states have been updated, the transition
schedules are called - first the exit schedules, then transition
schedules and finally enter schedules.
- Added `SubStates` trait
- Adjusted `apply_state_transition` to be a no-op if the `State<S>`
resource doesn't exist
## Migration Guide
If the user accessed the NextState resource's value directly or created
them from scratch they will need to adjust to use the new enum variants:
- if they created a `NextState(Some(S))` - they should now use
`NextState::Pending(S)`
- if they created a `NextState(None)` -they should now use
`NextState::Unchanged`
- if they matched on the `NextState` value, they would need to make the
adjustments above
If the user manually utilized `apply_state_transition`, they should
instead use systems that trigger the `StateTransition` schedule.
---
## Future Work
There is still some future potential work in the area, but I wanted to
keep these potential features and changes separate to keep the scope
here contained, and keep the core of it easy to understand and use.
However, I do want to note some of these things, both as inspiration to
others and an illustration of what this PR could unlock.
- `NextState::Remove` - Now that the `State` related mechanisms all
utilize options (#11417), it's fairly easy to add support for explicit
state removal. And while `ComputedStates` can add and remove themselves,
right now `FreelyMutableState`s can't be removed from within the state
system. While it existed originally in this PR, it is a different
question with a separate scope and usability concerns - so having it as
it's own future PR seems like the best approach. This feature currently
lives in a separate branch in my fork, and the differences between it
and this PR can be seen here: https://github.com/lee-orr/bevy/pull/5
- `NextState::ReEnter` - this would allow you to trigger exit & entry
systems for the current state type. We can potentially also add a
`NextState::ReEnterRecirsive` to also re-trigger any states that depend
on the current one.
- More mechanisms for `State` updates - This PR would finally make
states that aren't a set of exclusive Enums useful, and with that comes
the question of setting state more effectively. Right now, to update a
state you either need to fully create the new state, or include the
`Res<Option<State<S>>>` resource in your system, clone the state, mutate
it, and then use `NextState.set(my_mutated_state)` to make it the
pending next state. There are a few other potential methods that could
be implemented in future PRs:
- Inverse Compute States - these would essentially be compute states
that have an additional (manually defined) function that can be used to
nudge the source states so that they result in the computed states
having a given value. For example, you could use set the `IsPaused`
state, and it would attempt to pause or unpause the game by modifying
the `AppState` as needed.
- Closure-based state modification - this would involve adding a
`NextState.modify(f: impl Fn(Option<S> -> Option<S>)` method, and then
you can pass in closures or function pointers to adjust the state as
needed.
- Message-based state modification - this would involve either creating
states that can respond to specific messages, similar to Elm or Redux.
These could either use the `NextState` mechanism or the Event mechanism.
- ~`SubStates` - which are essentially a hybrid of computed and manual
states. In the simplest (and most likely) version, they would work by
having a computed element that determines whether the state should
exist, and if it should has the capacity to add a new version in, but
then any changes to it's content would be freely mutated.~ this feature
is now part of this PR. See above.
- Lastly, since states are getting more complex there might be value in
moving them out of `bevy_ecs` and into their own crate, or at least out
of the `schedule` module into a `states` module. #11087
As mentioned, all these future work elements are TBD and are explicitly
not part of this PR - I just wanted to provide them as potential
explorations for the future.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Marcel Champagne <voiceofmarcel@gmail.com>
Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>
This commit expands Bevy's existing tonemapping feature to a complete
set of filmic color grading tools, matching those of engines like Unity,
Unreal, and Godot. The following features are supported:
* White point adjustment. This is inspired by Unity's implementation of
the feature, but simplified and optimized. *Temperature* and *tint*
control the adjustments to the *x* and *y* chromaticity values of [CIE
1931]. Following Unity, the adjustments are made relative to the [D65
standard illuminant] in the [LMS color space].
* Hue rotation. This simply converts the RGB value to [HSV], alters the
hue, and converts back.
* Color correction. This allows the *gamma*, *gain*, and *lift* values
to be adjusted according to the standard [ASC CDL combined function].
* Separate color correction for shadows, midtones, and highlights.
Blender's source code was used as a reference for the implementation of
this. The midtone ranges can be adjusted by the user. To avoid abrupt
color changes, a small crossfade is used between the different sections
of the image, again following Blender's formulas.
A new example, `color_grading`, has been added, offering a GUI to change
all the color grading settings. It uses the same test scene as the
existing `tonemapping` example, which has been factored out into a
shared glTF scene.
[CIE 1931]: https://en.wikipedia.org/wiki/CIE_1931_color_space
[D65 standard illuminant]:
https://en.wikipedia.org/wiki/Standard_illuminant#Illuminant_series_D
[LMS color space]: https://en.wikipedia.org/wiki/LMS_color_space
[HSV]: https://en.wikipedia.org/wiki/HSL_and_HSV
[ASC CDL combined function]:
https://en.wikipedia.org/wiki/ASC_CDL#Combined_Function
## Changelog
### Added
* Many new filmic color grading options have been added to the
`ColorGrading` component.
## Migration Guide
* `ColorGrading::gamma` and `ColorGrading::pre_saturation` are now set
separately for the `shadows`, `midtones`, and `highlights` sections. You
can migrate code with the `ColorGrading::all_sections` and
`ColorGrading::all_sections_mut` functions, which access and/or update
all sections at once.
* `ColorGrading::post_saturation` and `ColorGrading::exposure` are now
fields of `ColorGrading::global`.
## Screenshots
# Objective
- Enables support for `Display::Block`
- Enables support for `Overflow::Hidden`
- Allows for cleaner integration with text, image and other content
layout.
- Unblocks https://github.com/bevyengine/bevy/pull/8104
- Unlocks the possibility of Bevy creating a custom layout tree over
which Taffy operates.
- Enables #8808 / #10193 to remove a Mutex around the font system.
## Todo
- [x] ~Fix rendering of text/images to account for padding/border on
nodes (should size/position to content box rather than border box)~ In
order get this into a mergeable state this PR instead zeroes out
padding/border when syncing leaf node styles into Taffy to preserve the
existing behaviour. https://github.com/bevyengine/bevy/issues/6879 can
be fixed in a followup PR.
## Solution
- Update the version of Taffy
- Update code to work with the new version
Note: Taffy 0.4 has not yet been released. This PR is being created in
advance of the release to ensure that there are no blockers to upgrading
once the release occurs.
---
## Changelog
- Bevy now supports the `Display::Block` and `Overflow::Hidden` styles.
# Objective
- Partially resolves#12639.
## Solution
- Deprecate `ReceivedCharacter`.
- Replace `ReceivedCharacter` with `KeyboardInput` in the relevant
examples.
## Migration Guide
- `ReceivedCharacter` is now deprecated, use `KeyboardInput` instead.
- Before:
```rust
fn listen_characters(events: EventReader<ReceivedCharacter>) {
for event in events.read() {
info!("{}", event.char);
}
}
```
After:
```rust
fn listen_characters(events: EventReader<KeyboardInput>) {
for event in events.read() {
// Only check for characters when the key is pressed.
if event.state == ButtonState::Released {
continue;
}
// Note that some keys such as `Space` and `Tab` won't be detected as
before.
// Instead, check for them with `Key::Space` and `Key::Tab`.
if let Key::Character(character) = &event.logical_key {
info!("{}", character);
}
}
}
```
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
This commit implements opt-in GPU frustum culling, built on top of the
infrastructure in https://github.com/bevyengine/bevy/pull/12773. To
enable it on a camera, add the `GpuCulling` component to it. To
additionally disable CPU frustum culling, add the `NoCpuCulling`
component. Note that adding `GpuCulling` without `NoCpuCulling`
*currently* does nothing useful. The reason why `GpuCulling` doesn't
automatically imply `NoCpuCulling` is that I intend to follow this patch
up with GPU two-phase occlusion culling, and CPU frustum culling plus
GPU occlusion culling seems like a very commonly-desired mode.
Adding the `GpuCulling` component to a view puts that view into
*indirect mode*. This mode makes all drawcalls indirect, relying on the
mesh preprocessing shader to allocate instances dynamically. In indirect
mode, the `PreprocessWorkItem` `output_index` points not to a
`MeshUniform` instance slot but instead to a set of `wgpu`
`IndirectParameters`, from which it allocates an instance slot
dynamically if frustum culling succeeds. Batch building has been updated
to allocate and track indirect parameter slots, and the AABBs are now
supplied to the GPU as `MeshCullingData`.
A small amount of code relating to the frustum culling has been borrowed
from meshlets and moved into `maths.wgsl`. Note that standard Bevy
frustum culling uses AABBs, while meshlets use bounding spheres; this
means that not as much code can be shared as one might think.
This patch doesn't provide any way to perform GPU culling on shadow
maps, to avoid making this patch bigger than it already is. That can be
a followup.
## Changelog
### Added
* Frustum culling can now optionally be done on the GPU. To enable it,
add the `GpuCulling` component to a camera.
* To disable CPU frustum culling, add `NoCpuCulling` to a camera. Note
that `GpuCulling` doesn't automatically imply `NoCpuCulling`.
Keeping track of explicit visibility per cluster between frames does not
work with LODs, and leads to worse culling (using the final depth buffer
from the previous frame is more accurate).
Instead, we need to generate a second depth pyramid after the second
raster pass, and then use that in the first culling pass in the next
frame to test if a cluster would have been visible last frame or not.
As part of these changes, the write_index_buffer pass has been folded
into the culling pass for a large performance gain, and to avoid
tracking a lot of extra state that would be needed between passes.
Prepass previous model/view stuff was adapted to work with meshlets as
well.
Also fixed a bug with materials, and other misc improvements.
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
- The [`version`] field in `Cargo.toml` is optional for crates not
published on <https://crates.io>.
- We have several `publish = false` tools in this repository that still
have a version field, even when it's not useful.
[`version`]:
https://doc.rust-lang.org/cargo/reference/manifest.html#the-version-field
## Solution
- Remove the [`version`] field for all crates where `publish = false`.
- Update the description on a few crates and remove extra newlines as
well.
# Objective
Fixes#11476
## Solution
Give the pipeline its own "mesh2d instances hashmap."
Pretty sure this is a good fix, but I am not super familiar with this
code so a rendering expert should take a look.
> your fix in the pull request works brilliantly for me too.
> -- _Discord user who pointed out bug_
https://github.com/bevyengine/bevy/assets/2632925/e046205e-3317-47c3-9959-fc94c529f7e0
# Objective
- Adds per-object motion blur to the core 3d pipeline. This is a common
effect used in games and other simulations.
- Partially resolves#4710
## Solution
- This is a post-process effect that uses the depth and motion vector
buffers to estimate per-object motion blur. The implementation is
combined from knowledge from multiple papers and articles. The approach
itself, and the shader are quite simple. Most of the effort was in
wiring up the bevy rendering plumbing, and properly specializing for HDR
and MSAA.
- To work with MSAA, the MULTISAMPLED_SHADING wgpu capability is
required. I've extracted this code from #9000. This is because the
prepass buffers are multisampled, and require accessing with
`textureLoad` as opposed to the widely compatible `textureSample`.
- Added an example to demonstrate the effect of motion blur parameters.
## Future Improvements
- While this approach does have limitations, it's one of the most
commonly used, and is much better than camera motion blur, which does
not consider object velocity. For example, this implementation allows a
dolly to track an object, and that object will remain unblurred while
the background is blurred. The biggest issue with this implementation is
that blur is constrained to the boundaries of objects which results in
hard edges. There are solutions to this by either dilating the object or
the motion vector buffer, or by taking a different approach such as
https://casual-effects.com/research/McGuire2012Blur/index.html
- I'm using a noise PRNG function to jitter samples. This could be
replaced with a blue noise texture lookup or similar, however after
playing with the parameters, it gives quite nice results with 4 samples,
and is significantly better than the artifacts generated when not
jittering.
---
## Changelog
- Added: per-object motion blur. This can be enabled and configured by
adding the `MotionBlurBundle` to a camera entity.
---------
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
- animating a sprite in response to an event is a [common beginner
problem](https://www.reddit.com/r/bevy/comments/13xx4v7/sprite_animation_in_bevy/)
## Solution
- provide a simple example to show how to animate a sprite in response
to an event
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Clarify the comment about the camera's coordinate system in
`examples/3d/generate_custom_mesh.rs` by explicitly stating which axes
point where.
Fixes#13018
## Solution
Copy the wording from #13012 into the example.
# Objective
Closes#13017.
## Solution
- Make `AppExit` a enum with a `Success` and `Error` variant.
- Make `App::run()` return a `AppExit` if it ever returns.
- Make app runners return a `AppExit` to signal if they encountered a
error.
---
## Changelog
### Added
- [`App::should_exit`](https://example.org/)
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
to the `bevy` and `bevy_app` preludes,
### Changed
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
is now a enum with 2 variants (`Success` and `Error`).
- The app's [runner
function](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.set_runner)
now has to return a `AppExit`.
-
[`App::run()`](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.run)
now also returns the `AppExit` produced by the runner function.
## Migration Guide
- Replace all usages of
[`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
with `AppExit::Success` or `AppExit::Failure`.
- Any custom app runners now need to return a `AppExit`. We suggest you
return a `AppExit::Error` if any `AppExit` raised was a Error. You can
use the new [`App::should_exit`](https://example.org/) method.
- If not exiting from `main` any other way. You should return the
`AppExit` from `App::run()` so the app correctly returns a error code if
anything fails e.g.
```rust
fn main() -> AppExit {
App::new()
//Your setup here...
.run()
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Allow parallel iteration over events, resolve#10766
## Solution
- Add `EventParIter` which works similarly to `QueryParIter`,
implementing a `for_each{_with_id}` operator.
I chose to not mirror `EventIteratorWithId` and instead implement both
operations on a single struct.
- Reuse `BatchingStrategy` from `QueryParIter`
## Changelog
- `EventReader` now supports parallel event iteration using
`par_read().for_each(|event| ...)`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
- The docs says the WireframeColor is supposed to override the default
global color but it doesn't.
## Solution
- Use WireframeColor to override global color like docs said it was
supposed to do.
- Updated the example to document this feature
- I also took the opportunity to clean up the code a bit
Fixes#13032
# Objective
Fixes#12900
## Solution
Added comment to example indicating that additional audio formats are
supported when the feature is added.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
When learning about creating meshes in bevy using this example I
couldn't tell which coordinate system bevy uses, which caused confusion
and having to look it up else where.
## Solution
Add a comment that says what coordinate system bevy uses.
# Objective
- Fixes#12976
## Solution
This one is a doozy.
- Run `cargo +beta clippy --workspace --all-targets --all-features` and
fix all issues
- This includes:
- Moving inner attributes to be outer attributes, when the item in
question has both inner and outer attributes
- Use `ptr::from_ref` in more scenarios
- Extend the valid idents list used by `clippy:doc_markdown` with more
names
- Use `Clone::clone_from` when possible
- Remove redundant `ron` import
- Add backticks to **so many** identifiers and items
- I'm sorry whoever has to review this
---
## Changelog
- Added links to more identifiers in documentation.
[Alpha to coverage] (A2C) replaces alpha blending with a
hardware-specific multisample coverage mask when multisample
antialiasing is in use. It's a simple form of [order-independent
transparency] that relies on MSAA. ["Anti-aliased Alpha Test: The
Esoteric Alpha To Coverage"] is a good summary of the motivation for and
best practices relating to A2C.
This commit implements alpha to coverage support as a new variant for
`AlphaMode`. You can supply `AlphaMode::AlphaToCoverage` as the
`alpha_mode` field in `StandardMaterial` to use it. When in use, the
standard material shader automatically applies the texture filtering
method from ["Anti-aliased Alpha Test: The Esoteric Alpha To Coverage"].
Objects with alpha-to-coverage materials are binned in the opaque pass,
as they're fully order-independent.
The `transparency_3d` example has been updated to feature an object with
alpha to coverage. Happily, the example was already using MSAA.
This is part of #2223, as far as I can tell.
[Alpha to coverage]: https://en.wikipedia.org/wiki/Alpha_to_coverage
[order-independent transparency]:
https://en.wikipedia.org/wiki/Order-independent_transparency
["Anti-aliased Alpha Test: The Esoteric Alpha To Coverage"]:
https://bgolus.medium.com/anti-aliased-alpha-test-the-esoteric-alpha-to-coverage-8b177335ae4f
---
## Changelog
### Added
* The `AlphaMode` enum now supports `AlphaToCoverage`, to provide
limited order-independent transparency when multisample antialiasing is
in use.
# Objective
- Fix some doc warnings
- Add doc-scrape-examples to all examples
Moved from #12692
I run `cargo +nightly doc --workspace --all-features --no-deps
-Zunstable-options -Zrustdoc-scrape-examples`
<details>
```
warning: public documentation for `GzAssetLoaderError` links to private item `GzAssetLoader`
--> examples/asset/asset_decompression.rs:24:47
|
24 | /// Possible errors that can be produced by [`GzAssetLoader`]
| ^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `#[warn(rustdoc::private_intra_doc_links)]` on by default
warning: `bevy` (example "asset_decompression") generated 1 warning
warning: unresolved link to `shape::Quad`
--> examples/2d/mesh2d.rs:3:15
|
3 | //! [`Quad`]: shape::Quad
| ^^^^^^^^^^^ no item named `shape` in scope
|
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "mesh2d") generated 1 warning
warning: unresolved link to `WorldQuery`
--> examples/ecs/custom_query_param.rs:1:49
|
1 | //! This example illustrates the usage of the [`WorldQuery`] derive macro, which allows
| ^^^^^^^^^^ no item named `WorldQuery` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "custom_query_param") generated 1 warning
warning: unresolved link to `shape::Quad`
--> examples/2d/mesh2d_vertex_color_texture.rs:4:15
|
4 | //! [`Quad`]: shape::Quad
| ^^^^^^^^^^^ no item named `shape` in scope
|
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "mesh2d_vertex_color_texture") generated 1 warning
warning: public documentation for `TextPlugin` links to private item `CoolText`
--> examples/asset/processing/asset_processing.rs:48:9
|
48 | /// * [`CoolText`]: a custom RON text format that supports dependencies and embedded dependencies
| ^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `#[warn(rustdoc::private_intra_doc_links)]` on by default
warning: public documentation for `TextPlugin` links to private item `Text`
--> examples/asset/processing/asset_processing.rs:49:9
|
49 | /// * [`Text`]: a "normal" plain text file
| ^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
warning: public documentation for `TextPlugin` links to private item `CoolText`
--> examples/asset/processing/asset_processing.rs:51:57
|
51 | /// It also defines an asset processor that will load [`CoolText`], resolve embedded dependenc...
| ^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
warning: `bevy` (example "asset_processing") generated 3 warnings
warning: public documentation for `CustomAssetLoaderError` links to private item `CustomAssetLoader`
--> examples/asset/custom_asset.rs:20:47
|
20 | /// Possible errors that can be produced by [`CustomAssetLoader`]
| ^^^^^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `#[warn(rustdoc::private_intra_doc_links)]` on by default
warning: public documentation for `BlobAssetLoaderError` links to private item `CustomAssetLoader`
--> examples/asset/custom_asset.rs:61:47
|
61 | /// Possible errors that can be produced by [`CustomAssetLoader`]
| ^^^^^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
```
```
warning: `bevy` (example "mesh2d") generated 1 warning
warning: public documentation for `log_layers_ecs` links to private item `update_subscriber`
--> examples/app/log_layers_ecs.rs:6:18
|
6 | //! Inside the [`update_subscriber`] function we will create a [`mpsc::Sender`] and a [`mpsc::R...
| ^^^^^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `#[warn(rustdoc::private_intra_doc_links)]` on by default
warning: unresolved link to `AdvancedLayer`
--> examples/app/log_layers_ecs.rs:7:72
|
7 | ... will go into the [`AdvancedLayer`] and the [`Receiver`](mpsc::Receiver) will
| ^^^^^^^^^^^^^ no item named `AdvancedLayer` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: unresolved link to `LogEvents`
--> examples/app/log_layers_ecs.rs:8:42
|
8 | //! go into a non-send resource called [`LogEvents`] (It has to be non-send because [`Receiver`...
| ^^^^^^^^^ no item named `LogEvents` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
warning: public documentation for `log_layers_ecs` links to private item `transfer_log_events`
--> examples/app/log_layers_ecs.rs:9:30
|
9 | //! From there we will use [`transfer_log_events`] to transfer log events from [`LogEvents`] to...
| ^^^^^^^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
warning: unresolved link to `LogEvents`
--> examples/app/log_layers_ecs.rs:9:82
|
9 | ...nsfer log events from [`LogEvents`] to an ECS event called [`LogEvent`].
| ^^^^^^^^^ no item named `LogEvents` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
warning: public documentation for `log_layers_ecs` links to private item `LogEvent`
--> examples/app/log_layers_ecs.rs:9:119
|
9 | ...nts`] to an ECS event called [`LogEvent`].
| ^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
warning: public documentation for `log_layers_ecs` links to private item `LogEvent`
--> examples/app/log_layers_ecs.rs:11:49
|
11 | //! Finally, after all that we can access the [`LogEvent`] event from our systems and use it.
| ^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
```
<details/>
This commit splits `VisibleEntities::entities` into four separate lists:
one for lights, one for 2D meshes, one for 3D meshes, and one for UI
elements. This allows `queue_material_meshes` and similar methods to
avoid examining entities that are obviously irrelevant. In particular,
this separation helps scenes with many skinned meshes, as the individual
bones are considered visible entities but have no rendered appearance.
Internally, `VisibleEntities::entities` is a `HashMap` from the `TypeId`
representing a `QueryFilter` to the appropriate `Entity` list. I had to
do this because `VisibleEntities` is located within an upstream crate
from the crates that provide lights (`bevy_pbr`) and 2D meshes
(`bevy_sprite`). As an added benefit, this setup allows apps to provide
their own types of renderable components, by simply adding a specialized
`check_visibility` to the schedule.
This provides a 16.23% end-to-end speedup on `many_foxes` with 10,000
foxes (24.06 ms/frame to 20.70 ms/frame).
## Migration guide
* `check_visibility` and `VisibleEntities` now store the four types of
renderable entities--2D meshes, 3D meshes, lights, and UI
elements--separately. If your custom rendering code examines
`VisibleEntities`, it will now need to specify which type of entity it's
interested in using the `WithMesh2d`, `WithMesh`, `WithLight`, and
`WithNode` types respectively. If your app introduces a new type of
renderable entity, you'll need to add an explicit call to
`check_visibility` to the schedule to accommodate your new component or
components.
## Analysis
`many_foxes`, 10,000 foxes: `main`:
`many_foxes`, 10,000 foxes, this branch:
`queue_material_meshes` (yellow = this branch, red = `main`):
`queue_shadows` (yellow = this branch, red = `main`):
I ported the two existing PCF techniques to the cubemap domain as best I
could. Generally, the technique is to create a 2D orthonormal basis
using Gram-Schmidt normalization, then apply the technique over that
basis. The results look fine, though the shadow bias often needs
adjusting.
For comparison, Unity uses a 4-tap pattern for PCF on point lights of
(1, 1, 1), (-1, -1, 1), (-1, 1, -1), (1, -1, -1). I tried this but
didn't like the look, so I went with the design above, which ports the
2D techniques to the 3D domain. There's surprisingly little material on
point light PCF.
I've gone through every example using point lights and verified that the
shadow maps look fine, adjusting biases as necessary.
Fixes#3628.
---
## Changelog
### Added
* Shadows from point lights now support percentage-closer filtering
(PCF), and as a result look less aliased.
### Changed
* `ShadowFilteringMethod::Castano13` and
`ShadowFilteringMethod::Jimenez14` have been renamed to
`ShadowFilteringMethod::Gaussian` and `ShadowFilteringMethod::Temporal`
respectively.
## Migration Guide
* `ShadowFilteringMethod::Castano13` and
`ShadowFilteringMethod::Jimenez14` have been renamed to
`ShadowFilteringMethod::Gaussian` and `ShadowFilteringMethod::Temporal`
respectively.
Currently, `MeshUniform`s are rather large: 160 bytes. They're also
somewhat expensive to compute, because they involve taking the inverse
of a 3x4 matrix. Finally, if a mesh is present in multiple views, that
mesh will have a separate `MeshUniform` for each and every view, which
is wasteful.
This commit fixes these issues by introducing the concept of a *mesh
input uniform* and adding a *mesh uniform building* compute shader pass.
The `MeshInputUniform` is simply the minimum amount of data needed for
the GPU to compute the full `MeshUniform`. Most of this data is just the
transform and is therefore only 64 bytes. `MeshInputUniform`s are
computed during the *extraction* phase, much like skins are today, in
order to avoid needlessly copying transforms around on CPU. (In fact,
the render app has been changed to only store the translation of each
mesh; it no longer cares about any other part of the transform, which is
stored only on the GPU and the main world.) Before rendering, the
`build_mesh_uniforms` pass runs to expand the `MeshInputUniform`s to the
full `MeshUniform`.
The mesh uniform building pass does the following, all on GPU:
1. Copy the appropriate fields of the `MeshInputUniform` to the
`MeshUniform` slot. If a single mesh is present in multiple views, this
effectively duplicates it into each view.
2. Compute the inverse transpose of the model transform, used for
transforming normals.
3. If applicable, copy the mesh's transform from the previous frame for
TAA. To support this, we double-buffer the `MeshInputUniform`s over two
frames and swap the buffers each frame. The `MeshInputUniform`s for the
current frame contain the index of that mesh's `MeshInputUniform` for
the previous frame.
This commit produces wins in virtually every CPU part of the pipeline:
`extract_meshes`, `queue_material_meshes`,
`batch_and_prepare_render_phase`, and especially
`write_batched_instance_buffer` are all faster. Shrinking the amount of
CPU data that has to be shuffled around speeds up the entire rendering
process.
| Benchmark | This branch | `main` | Speedup |
|------------------------|-------------|---------|---------|
| `many_cubes -nfc` | 17.259 | 24.529 | 42.12% |
| `many_cubes -nfc -vpi` | 302.116 | 312.123 | 3.31% |
| `many_foxes` | 3.227 | 3.515 | 8.92% |
Because mesh uniform building requires compute shader, and WebGL 2 has
no compute shader, the existing CPU mesh uniform building code has been
left as-is. Many types now have both CPU mesh uniform building and GPU
mesh uniform building modes. Developers can opt into the old CPU mesh
uniform building by setting the `use_gpu_uniform_builder` option on
`PbrPlugin` to `false`.
Below are graphs of the CPU portions of `many-cubes
--no-frustum-culling`. Yellow is this branch, red is `main`.
`extract_meshes`:
It's notable that we get a small win even though we're now writing to a
GPU buffer.
`queue_material_meshes`:
There's a bit of a regression here; not sure what's causing it. In any
case it's very outweighed by the other gains.
`batch_and_prepare_render_phase`:
There's a huge win here, enough to make batching basically drop off the
profile.
`write_batched_instance_buffer`:
There's a massive improvement here, as expected. Note that a lot of it
simply comes from the fact that `MeshInputUniform` is `Pod`. (This isn't
a maintainability problem in my view because `MeshInputUniform` is so
simple: just 16 tightly-packed words.)
## Changelog
### Added
* Per-mesh instance data is now generated on GPU with a compute shader
instead of CPU, resulting in rendering performance improvements on
platforms where compute shaders are supported.
## Migration guide
* Custom render phases now need multiple systems beyond just
`batch_and_prepare_render_phase`. Code that was previously creating
custom render phases should now add a `BinnedRenderPhasePlugin` or
`SortedRenderPhasePlugin` as appropriate instead of directly adding
`batch_and_prepare_render_phase`.
# Objective
- Replace `RenderMaterials` / `RenderMaterials2d` / `RenderUiMaterials`
with `RenderAssets` to enable implementing changes to one thing,
`RenderAssets`, that applies to all use cases rather than duplicating
changes everywhere for multiple things that should be one thing.
- Adopts #8149
## Solution
- Make RenderAsset generic over the destination type rather than the
source type as in #8149
- Use `RenderAssets<PreparedMaterial<M>>` etc for render materials
---
## Changelog
- Changed:
- The `RenderAsset` trait is now implemented on the destination type.
Its `SourceAsset` associated type refers to the type of the source
asset.
- `RenderMaterials`, `RenderMaterials2d`, and `RenderUiMaterials` have
been replaced by `RenderAssets<PreparedMaterial<M>>` and similar.
## Migration Guide
- `RenderAsset` is now implemented for the destination type rather that
the source asset type. The source asset type is now the `RenderAsset`
trait's `SourceAsset` associated type.
Allows the user to select a scene to load, then a loading screen is
shown until all assets are loaded, and pipelines compiled.
# Objective
- Fixes#12654
## Solution
- Add desired assets to be monitored to a list.
- While there are assets that are not fully loaded, show a loading
screen.
- Once all assets are loaded, and pipelines compiled, show the scene
that was loaded.
# Objective
- Example `compute_shader_game_of_life` is random and not following the
rules of the game of life: at each steps, it randomly reads some pixel
of the current step and some of the previous step instead of only from
the previous step
- Fixes#9353
## Solution
- Adopted from #9678
- Added a switch of the texture displayed every frame otherwise the game
of life looks wrong
- Added a way to display the texture bigger so that I could manually
check everything was right
---------
Co-authored-by: Sludge <96552222+SludgePhD@users.noreply.github.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Fixes#12411
- Add an example demonstrating the usage of asset meta files.
## Solution
- Add a new example displaying a basic scene of three pixelated images
- Apply a .meta file to one of the assets setting Nearest filtering
- Use AssetServer::load_with_settings on the last one as another way to
achieve the same effect
- The result is one blurry image and two crisp images demonstrating a
common scenario in which changing settings are useful.
# Objective
- It's pretty common for users to want to read data back from the gpu
and into the main world
## Solution
- Add a simple example that shows how to read data back from the gpu and
send it to the main world using a channel.
- The example is largely based on this wgpu example but adapted to bevy
-
fb305b85f6/examples/src/repeated_compute/mod.rs
---------
Co-authored-by: stormy <120167078+stowmyy@users.noreply.github.com>
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
- There is a little mistake in a line comment.
## Solution
- Fixed the comment to correctly describe what happens in the documented
calculation.
# Objective
Fix#11931
## Solution
- Make stepping a non-default feature
- Adjust documentation and examples
- In particular, make the breakout example not show the stepping prompt
if compiled without the feature (shows a log message instead)
---
## Changelog
- Removed `bevy_debug_stepping` from default features
## Migration Guide
The system-by-system stepping feature is now disabled by default; to use
it, enable the `bevy_debug_stepping` feature explicitly:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_debug_stepping"] }
```
Code using
[`Stepping`](https://docs.rs/bevy/latest/bevy/ecs/schedule/struct.Stepping.html)
will still compile with the feature disabled, but will print a runtime
error message to the console if the application attempts to enable
stepping.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- As @james7132 said [on
Discord](https://discord.com/channels/691052431525675048/692572690833473578/1224626740773523536),
the `close_on_esc` system is forcing `bevy_window` to depend on
`bevy_input`.
- `close_on_esc` is not likely to be used in production, so it arguably
does not have a place in `bevy_window`.
## Solution
- As suggested by @afonsolage, move `close_on_esc` into
`bevy_dev_tools`.
- Add an example to the documentation too.
- Remove `bevy_window`'s dependency on `bevy_input`.
- Add `bevy_reflect`'s `smol_str` feature to `bevy_window` because it
was implicitly depended upon with `bevy_input` before it was removed.
- Remove any usage of `close_on_esc` from the examples.
- `bevy_dev_tools` is not enabled by default. I personally find it
frustrating to run examples with additional features, so I opted to
remove it entirely.
- This is up for discussion if you have an alternate solution.
---
## Changelog
- Moved `bevy_window::close_on_esc` to `bevy_dev_tools::close_on_esc`.
- Removed usage of `bevy_dev_tools::close_on_esc` from all examples.
## Migration Guide
`bevy_window::close_on_esc` has been moved to
`bevy_dev_tools::close_on_esc`. You will first need to enable
`bevy_dev_tools` as a feature in your `Cargo.toml`:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_dev_tools"] }
```
Finally, modify any imports to use `bevy_dev_tools` instead:
```rust
// Old:
// use bevy:🪟:close_on_esc;
// New:
use bevy::dev_tools::close_on_esc;
App::new()
.add_systems(Update, close_on_esc)
// ...
.run();
```
# Objective
- Enable stressing of more of the material mesh entity draw code paths
## Solution
- Support generation of a number of different mesh assets from the
built-in primitives, and select randomly from them. This breaks batches
based on different meshes.
- Support disabling automatic batching. This skips the batching cost at
the expense of stressing render pass draw command encoding.
- Support enabling directional light cascaded shadow mapping - this is
commonly a big source of slow down in normal scenes.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
This commit makes the following optimizations:
## `MeshPipelineKey`/`BaseMeshPipelineKey` split
`MeshPipelineKey` has been split into `BaseMeshPipelineKey`, which lives
in `bevy_render` and `MeshPipelineKey`, which lives in `bevy_pbr`.
Conceptually, `BaseMeshPipelineKey` is a superclass of
`MeshPipelineKey`. For `BaseMeshPipelineKey`, the bits start at the
highest (most significant) bit and grow downward toward the lowest bit;
for `MeshPipelineKey`, the bits start at the lowest bit and grow upward
toward the highest bit. This prevents them from colliding.
The goal of this is to avoid having to reassemble bits of the pipeline
key for every mesh every frame. Instead, we can just use a bitwise or
operation to combine the pieces that make up a `MeshPipelineKey`.
## `specialize_slow`
Previously, all of `specialize()` was marked as `#[inline]`. This
bloated `queue_material_meshes` unnecessarily, as a large chunk of it
ended up being a slow path that was rarely hit. This commit refactors
the function to move the slow path to `specialize_slow()`.
Together, these two changes shave about 5% off `queue_material_meshes`:
## Migration Guide
- The `primitive_topology` field on `GpuMesh` is now an accessor method:
`GpuMesh::primitive_topology()`.
- For performance reasons, `MeshPipelineKey` has been split into
`BaseMeshPipelineKey`, which lives in `bevy_render`, and
`MeshPipelineKey`, which lives in `bevy_pbr`. These two should be
combined with bitwise-or to produce the final `MeshPipelineKey`.
# Objective
- There are several redundant imports in the tests and examples that are
not caught by CI because additional flags need to be passed.
## Solution
- Run `cargo check --workspace --tests` and `cargo check --workspace
--examples`, then fix all warnings.
- Add `test-check` to CI, which will be run in the check-compiles job.
This should catch future warnings for tests. Examples are already
checked, but I'm not yet sure why they weren't caught.
## Discussion
- Should the `--tests` and `--examples` flags be added to CI, so this is
caught in the future?
- If so, #12818 will need to be merged first. It was also a warning
raised by checking the examples, but I chose to split off into a
separate PR.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- Since #12453, `DeterministicRenderingConfig` doesn't do anything
## Solution
- Remove it
---
## Migration Guide
- Removed `DeterministicRenderingConfig`. There shouldn't be any z
fighting anymore in the rendering even without setting
`stable_sort_z_fighting`
# Objective
- The `ImePreedit` component from
[`text_input`](50699ecf76/examples/input/text_input.rs (L126-L127))
appears to be unused.
- This was found by running `cargo check --workspace --examples`,
originally as part of #12817.
## Solution
- Remove it :)
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
- `examples/shader/post_processing.rs` is a shader example that works
for 3d
- I recently tried to update this example to get it to work on 2d but
failed to do so
- Then I created a discord help thread to help me figure this out.
[here's the link to the
thread](https://discordapp.com/channels/691052431525675048/1221819669116354723).
## Solution
- The solution is to replace all instances of 3d structures with their
respective 2d counterparts
## Changelog
- Added a small comment that explains how to get the example to work on
2d
#### Please do suggest changes if any
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Today, we sort all entities added to all phases, even the phases that
don't strictly need sorting, such as the opaque and shadow phases. This
results in a performance loss because our `PhaseItem`s are rather large
in memory, so sorting is slow. Additionally, determining the boundaries
of batches is an O(n) process.
This commit makes Bevy instead applicable place phase items into *bins*
keyed by *bin keys*, which have the invariant that everything in the
same bin is potentially batchable. This makes determining batch
boundaries O(1), because everything in the same bin can be batched.
Instead of sorting each entity, we now sort only the bin keys. This
drops the sorting time to near-zero on workloads with few bins like
`many_cubes --no-frustum-culling`. Memory usage is improved too, with
batch boundaries and dynamic indices now implicit instead of explicit.
The improved memory usage results in a significant win even on
unbatchable workloads like `many_cubes --no-frustum-culling
--vary-material-data-per-instance`, presumably due to cache effects.
Not all phases can be binned; some, such as transparent and transmissive
phases, must still be sorted. To handle this, this commit splits
`PhaseItem` into `BinnedPhaseItem` and `SortedPhaseItem`. Most of the
logic that today deals with `PhaseItem`s has been moved to
`SortedPhaseItem`. `BinnedPhaseItem` has the new logic.
Frame time results (in ms/frame) are as follows:
| Benchmark | `binning` | `main` | Speedup |
| ------------------------ | --------- | ------- | ------- |
| `many_cubes -nfc -vpi` | 232.179 | 312.123 | 34.43% |
| `many_cubes -nfc` | 25.874 | 30.117 | 16.40% |
| `many_foxes` | 3.276 | 3.515 | 7.30% |
(`-nfc` is short for `--no-frustum-culling`; `-vpi` is short for
`--vary-per-instance`.)
---
## Changelog
### Changed
* Render phases have been split into binned and sorted phases. Binned
phases, such as the common opaque phase, achieve improved CPU
performance by avoiding the sorting step.
## Migration Guide
- `PhaseItem` has been split into `BinnedPhaseItem` and
`SortedPhaseItem`. If your code has custom `PhaseItem`s, you will need
to migrate them to one of these two types. `SortedPhaseItem` requires
the fewest code changes, but you may want to pick `BinnedPhaseItem` if
your phase doesn't require sorting, as that enables higher performance.
## Tracy graphs
`many-cubes --no-frustum-culling`, `main` branch:
<img width="1064" alt="Screenshot 2024-03-12 180037"
src="https://github.com/bevyengine/bevy/assets/157897/e1180ce8-8e89-46d2-85e3-f59f72109a55">
`many-cubes --no-frustum-culling`, this branch:
<img width="1064" alt="Screenshot 2024-03-12 180011"
src="https://github.com/bevyengine/bevy/assets/157897/0899f036-6075-44c5-a972-44d95895f46c">
You can see that `batch_and_prepare_binned_render_phase` is a much
smaller fraction of the time. Zooming in on that function, with yellow
being this branch and red being `main`, we see:
<img width="1064" alt="Screenshot 2024-03-12 175832"
src="https://github.com/bevyengine/bevy/assets/157897/0dfc8d3f-49f4-496e-8825-a66e64d356d0">
The binning happens in `queue_material_meshes`. Again with yellow being
this branch and red being `main`:
<img width="1064" alt="Screenshot 2024-03-12 175755"
src="https://github.com/bevyengine/bevy/assets/157897/b9b20dc1-11c8-400c-a6cc-1c2e09c1bb96">
We can see that there is a small regression in `queue_material_meshes`
performance, but it's not nearly enough to outweigh the large gains in
`batch_and_prepare_binned_render_phase`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Created soundtrack example, fade-in and fade-out features, added new
assets, and updated credits.
# Objective
- Fixes#12651
## Solution
- Created a resource to hold the track list.
- The audio assets are then loaded by the asset server and added to the
track list.
- Once the game is in a specific state, an `AudioBundle` is spawned and
plays the appropriate track.
- The audio volume starts at zero and is then incremented gradually
until it reaches full volume.
- Once the game state changes, the current track fades out, and a new
one fades in at the same time, offering a relatively seamless
transition.
- Once a track is completely faded out, it is despawned from the app.
- Game state changes are simulated through a `Timer` for simplicity.
- Track change system is only run if there is a change in the
`GameState` resource.
- All tracks are used according to their respective licenses.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Wireframes are currently supported for 3D meshes using the
`WireframePlugin` in `bevy_pbr`. This PR adds the same functionality for
2D meshes.
Closes#5881.
## Solution
Since there's no easy way to share material implementations between 2D,
3D, and UI, this is mostly a straight copy and rename from the original
plugin into `bevy_sprite`.
<img width="1392" alt="image"
src="https://github.com/bevyengine/bevy/assets/3961616/7aca156f-448a-4c7e-89b8-0a72c5919769">
---
## Changelog
- Added `Wireframe2dPlugin` and related types to support 2D wireframes.
- Added an example to demonstrate how to use 2D wireframes
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Example `mesh2d_manual` crashes in wasm/webgl2, as reported in
https://github.com/bevyengine/bevy-website/issues/1123#issuecomment-2019479670
```
wgpu error: Validation Error
Caused by:
In a RenderPass
note: encoder = `<CommandBuffer-(0, 1, Gl)>`
In a set_push_constant command
Provided push constant is for stage(s) ShaderStages(VERTEX), however the pipeline layout has no push constant range for the stage(s) ShaderStages(VERTEX)
```
## Solution
- Properly declare the push constant as in
4508077297/crates/bevy_sprite/src/mesh2d/mesh.rs (L514-L524)
# Objective
Previously, the `Point` trait, which abstracts all of the operations of
a real vector space, was sitting in the submodule of `bevy_math` for
cubic splines. However, the trait has broader applications than merely
cubic splines, and we should use it when possible to avoid code
duplication when performing vector operations.
## Solution
`Point` has been moved into a new submodule in `bevy_math` named
`common_traits`. Furthermore, it has been renamed to `VectorSpace`,
which is more descriptive, and an additional trait `NormedVectorSpace`
has been introduced to expand the API to cover situations involving
geometry in addition to algebra. Additionally, `VectorSpace` itself now
requires a `ZERO` constant and `Neg`. It also supports a `lerp` function
as an automatic trait method.
Here is what that looks like:
```rust
/// A type that supports the mathematical operations of a real vector space, irrespective of dimension.
/// In particular, this means that the implementing type supports:
/// - Scalar multiplication and division on the right by elements of `f32`
/// - Negation
/// - Addition and subtraction
/// - Zero
///
/// Within the limitations of floating point arithmetic, all the following are required to hold:
/// - (Associativity of addition) For all `u, v, w: Self`, `(u + v) + w == u + (v + w)`.
/// - (Commutativity of addition) For all `u, v: Self`, `u + v == v + u`.
/// - (Additive identity) For all `v: Self`, `v + Self::ZERO == v`.
/// - (Additive inverse) For all `v: Self`, `v - v == v + (-v) == Self::ZERO`.
/// - (Compatibility of multiplication) For all `a, b: f32`, `v: Self`, `v * (a * b) == (v * a) * b`.
/// - (Multiplicative identity) For all `v: Self`, `v * 1.0 == v`.
/// - (Distributivity for vector addition) For all `a: f32`, `u, v: Self`, `(u + v) * a == u * a + v * a`.
/// - (Distributivity for scalar addition) For all `a, b: f32`, `v: Self`, `v * (a + b) == v * a + v * b`.
///
/// Note that, because implementing types use floating point arithmetic, they are not required to actually
/// implement `PartialEq` or `Eq`.
pub trait VectorSpace:
Mul<f32, Output = Self>
+ Div<f32, Output = Self>
+ Add<Self, Output = Self>
+ Sub<Self, Output = Self>
+ Neg
+ Default
+ Debug
+ Clone
+ Copy
{
/// The zero vector, which is the identity of addition for the vector space type.
const ZERO: Self;
/// Perform vector space linear interpolation between this element and another, based
/// on the parameter `t`. When `t` is `0`, `self` is recovered. When `t` is `1`, `rhs`
/// is recovered.
///
/// Note that the value of `t` is not clamped by this function, so interpolating outside
/// of the interval `[0,1]` is allowed.
#[inline]
fn lerp(&self, rhs: Self, t: f32) -> Self {
*self * (1. - t) + rhs * t
}
}
```
```rust
/// A type that supports the operations of a normed vector space; i.e. a norm operation in addition
/// to those of [`VectorSpace`]. Specifically, the implementor must guarantee that the following
/// relationships hold, within the limitations of floating point arithmetic:
/// - (Nonnegativity) For all `v: Self`, `v.norm() >= 0.0`.
/// - (Positive definiteness) For all `v: Self`, `v.norm() == 0.0` implies `v == Self::ZERO`.
/// - (Absolute homogeneity) For all `c: f32`, `v: Self`, `(v * c).norm() == v.norm() * c.abs()`.
/// - (Triangle inequality) For all `v, w: Self`, `(v + w).norm() <= v.norm() + w.norm()`.
///
/// Note that, because implementing types use floating point arithmetic, they are not required to actually
/// implement `PartialEq` or `Eq`.
pub trait NormedVectorSpace: VectorSpace {
/// The size of this element. The return value should always be nonnegative.
fn norm(self) -> f32;
/// The squared norm of this element. Computing this is often faster than computing
/// [`NormedVectorSpace::norm`].
#[inline]
fn norm_squared(self) -> f32 {
self.norm() * self.norm()
}
/// The distance between this element and another, as determined by the norm.
#[inline]
fn distance(self, rhs: Self) -> f32 {
(rhs - self).norm()
}
/// The squared distance between this element and another, as determined by the norm. Note that
/// this is often faster to compute in practice than [`NormedVectorSpace::distance`].
#[inline]
fn distance_squared(self, rhs: Self) -> f32 {
(rhs - self).norm_squared()
}
}
```
Furthermore, this PR also demonstrates the use of the
`NormedVectorSpace` combined API to implement `ShapeSample` for
`Triangle2d` and `Triangle3d` simultaneously. Such deduplication is one
of the drivers for developing these APIs.
---
## Changelog
- `Point` from `cubic_splines` becomes `VectorSpace`, exported as
`bevy::math::VectorSpace`.
- `VectorSpace` requires `Neg` and `VectorSpace::ZERO` in addition to
its existing prerequisites.
- Introduced public traits `bevy::math::NormedVectorSpace` for generic
geometry tasks involving vectors.
- Implemented `ShapeSample` for `Triangle2d` and `Triangle3d`.
## Migration Guide
Since `Point` no longer exists, any projects using it must switch to
`bevy::math::VectorSpace`. Additionally, third-party implementations of
this trait now require the `Neg` trait; the constant `VectorSpace::ZERO`
must be provided as well.
---
## Discussion
### Design considerations
Originally, the `NormedVectorSpace::norm` method was part of a separate
trait `Normed`. However, I think that was probably too broad and, more
importantly, the semantics of having it in `NormedVectorSpace` are much
clearer.
As it currently stands, the API exposed here is pretty minimal, and
there is definitely a lot more that we could do, but there are more
questions to answer along the way. As a silly example, we could
implement `NormedVectorSpace::length` as an alias for
`NormedVectorSpace::norm`, but this overlaps with methods in all of the
glam types, so we would want to make sure that the implementations are
effectively identical (for what it's worth, I think they are already).
### Future directions
One example of something that could belong in the `NormedVectorSpace`
API is normalization. Actually, such a thing previously existed on this
branch before I decided to shelve it because of concerns with namespace
collision. It looked like this:
```rust
/// This element, but normalized to norm 1 if possible. Returns an error when the reciprocal of
/// the element's norm is not finite.
#[inline]
#[must_use]
fn normalize(&self) -> Result<Self, NonNormalizableError> {
let reciprocal = 1.0 / self.norm();
if reciprocal.is_finite() {
Ok(*self * reciprocal)
} else {
Err(NonNormalizableError { reciprocal })
}
}
/// An error indicating that an element of a [`NormedVectorSpace`] was non-normalizable due to having
/// non-finite norm-reciprocal.
#[derive(Debug, Error)]
#[error("Element with norm reciprocal {reciprocal} cannot be normalized")]
pub struct NonNormalizableError {
reciprocal: f32
}
```
With this kind of thing in hand, it might be worth considering
eventually making the passage from vectors to directions fully generic
by employing a wrapper type. (Of course, for our concrete types, we
would leave the existing names in place as aliases.) That is, something
like:
```rust
pub struct NormOne<T>
where T: NormedVectorSpace { //... }
```
Utterly separately, the reason that I implemented `ShapeSample` for
`Triangle2d`/`Triangle3d` was to prototype uniform sampling of abstract
meshes, so that's also a future direction.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Adopted from and closes https://github.com/bevyengine/bevy/pull/9914 by
@djeedai
# Objective
Fix the use of `TypeRegistry` instead of `TypeRegistryArc` in dynamic
scene and its serializer.
Rename `DynamicScene::serialize_ron()` into `serialize()` to highlight
the fact this is not about serializing to RON specifically, but rather
about serializing to the official Bevy scene format (`.scn` /
`.scn.ron`) which the `SceneLoader` can deserialize (and which happens
to be based in RON, but that not the object here). Also make the link
with the documentation of `SceneLoader` so users understand the full
serializing cycle of a Bevy dynamic scene.
Document `SceneSerializer` with an example showing how to serialize to a
custom format (here: RON), which is easily transposed to serializing
into any other format.
Fixes#9520
## Changelog
### Changed
* `SceneSerializer` and all related serializing helper types now take a
`&TypeRegistry` instead of a `&TypeRegistryArc`. ([SceneSerializer
needlessly uses specifically
&TypeRegistryArc #9520](https://github.com/bevyengine/bevy/issues/9520))
* `DynamicScene::serialize_ron()` was renamed to `serialize()`.
## Migration Guide
* `SceneSerializer` and all related serializing helper types now take a
`&TypeRegistry` instead of a `&TypeRegistryArc`. You can upgrade by
getting the former from the latter with `TypeRegistryArc::read()`,
_e.g._
```diff
let registry_arc: TypeRegistryArc = [...];
- let serializer = SceneSerializer(&scene, ®istry_arc);
+ let registry = registry_arc.read();
+ let serializer = SceneSerializer(&scene, ®istry);
```
* Rename `DynamicScene::serialize_ron()` to `serialize()`.
---------
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Fixes#12712
## Solution
- Move the `float_ord.rs` file to `bevy_math`
- Change any `bevy_utils::FloatOrd` statements to `bevy_math::FloatOrd`
---
## Changelog
- Moved `FloatOrd` from `bevy_utils` to `bevy_math`
## Migration Guide
- References to `bevy_utils::FloatOrd` should be changed to
`bevy_math::FloatOrd`
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
We have `ReflectSerializer` and `TypedReflectSerializer`. The former is
the one users will most often use since the latter takes a bit more
effort to deserialize.
However, our deserializers are named `UntypedReflectDeserializer` and
`TypedReflectDeserializer`. There is no obvious indication that
`UntypedReflectDeserializer` must be used with `ReflectSerializer` since
the names don't quite match up.
## Solution
Rename `UntypedReflectDeserializer` back to `ReflectDeserializer`
(initially changed as part of #5723).
Also update the docs for both deserializers (as they were pretty out of
date) and include doc examples.
I also updated the docs for the serializers, too, just so that
everything is consistent.
---
## Changelog
- Renamed `UntypedReflectDeserializer` to `ReflectDeserializer`
- Updated docs for `ReflectDeserializer`, `TypedReflectDeserializer`,
`ReflectSerializer`, and `TypedReflectSerializer`
## Migration Guide
`UntypedReflectDeserializer` has been renamed to `ReflectDeserializer`.
Usages will need to be updated accordingly.
```diff
- let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
+ let reflect_deserializer = ReflectDeserializer::new(®istry);
```
# Objective
- Be more explicit in the name of the module for the ui debug overlay
- Avoid confusion and possible overlap with new overlays
## Solution
- Rename `debug_overlay` to `ui_debug_overlay`
# Objective
- Adds line styles to bevy gizmos, suggestion of #9400
- Currently solid and dotted lines are implemented but this can easily
be extended to support dashed lines as well if that is wanted.
## Solution
- Adds the enum `GizmoLineStyle` and uses it in each `GizmoConfig` to
configure the style of the line.
- Each "dot" in a dotted line has the same width and height as the
`line_width` of the corresponding line.
---
## Changelog
- Added `GizmoLineStyle` to `bevy_gizmos`
- Added a `line_style: GizmoLineStyle ` attribute to `GizmoConfig`
- Updated the `lines.wgsl` shader and the pipelines accordingly.
## Migration Guide
- Any manually created `GizmoConfig` must now include the `line_style`
attribute
## Additional information
Some pretty pictures :)
This is the 3d_gizmos example with/without `line_perspective`:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 53"
src="https://github.com/bevyengine/bevy/assets/62256001/b1b97311-e78d-4de3-8dfe-9e48a35bb27d">
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 39"
src="https://github.com/bevyengine/bevy/assets/62256001/50ee8ecb-5290-484d-ba36-7fd028374f7f">
And the 2d example:
<img width="1440" alt="Screenshot 2024-03-09 at 23 25 06"
src="https://github.com/bevyengine/bevy/assets/62256001/4452168f-d605-4333-bfa5-5461d268b132">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Fixes#12600
## Solution
Removed Into<AssetId<T>> for Handle<T> as proposed in Issue
conversation, fixed dependent code
## Migration guide
If you use passing Handle by value as AssetId, you should pass reference
or call .id() method on it
Before (0.13):
`assets.insert(handle, value);`
After (0.14):
`assets.insert(&handle, value);`
or
`assets.insert(handle.id(), value);`
# Objective
Fixes issue #12613 - the RNG used in examples is _deterministic_, but
its implementation is not _portable_ across platforms. We want to switch
to using a portable RNG that does not vary across platforms, to ensure
certain examples play out the same way every time.
## Solution
Replace all occurences of `rand::rngs::StdRng` with
`rand_chacha::ChaCha8Rng`, as recommended in issue #12613
---
## Changelog
- Add `rand_chacha` as a new dependency (controversial?)
- Replace all occurences of `rand::rngs::StdRng` with
`rand_chacha::ChaCha8Rng`
# Objective
- Implements maths and `Animatable` for `Srgba` as suggested
[here](https://github.com/bevyengine/bevy/issues/12617#issuecomment-2013494774).
## Solution
- Implements `Animatable` and maths for `Srgba` just like their
implemented for other colors.
---
## Changelog
- Updated the example to mention `Srgba`.
## Migration Guide
- The previously existing implementation of mul/div for `Srgba` did not
modify `alpha` but these operations do modify `alpha` now. Users need to
be aware of this change.
# Objective
- went through bounding_2d example with a fine-toothed comb and found
two small issues
## Solution
- pulled "draw a small filled-in circle" logic into a function
- removed impotent addition of aabb / circle origin (identically
`Vec2(0.0, 0.0)`)
# Objective
Fixes#12200 .
## Solution
I added a Hue Trait with the rotate_hue method to enable hue rotation.
Additionally, I modified the implementation of animations in the
animated_material sample.
---
## Changelog
- Added a `Hue` trait to `bevy_color/src/color_ops.rs`.
- Added the `Hue` trait implementation to `Hsla`, `Hsva`, `Hwba`,
`Lcha`, and `Oklcha`.
- Updated animated_material sample.
## Migration Guide
Users of Oklcha need to change their usage to use the with_hue method
instead of the with_h method.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#12202
## Solution
- Implements `Animatable` for all color types implementing arithmetic
operations.
- the colors returned by `Animatable`s methods are already clamped.
- Adds a `color_animation.rs` example.
- Implements the `*Assign` operators for color types that already had
the corresponding operators. This is just a 'nice to have' and I am
happy to remove this if it's not wanted.
---
## Changelog
- `bevy_animation` now depends on `bevy_color`.
- `LinearRgba`, `Laba`, `Oklaba` and `Xyza` implement `Animatable`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- A new example `rounded_borders` was introduced in #12500, similar to
the `borders` example, but containing labels to describe each border,
leaving inconsistency between the examples.
## Solution
- Update the `borders` example to be consistent with `rounded_borders`.
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Currently the fps_overlay affects any other ui node spawned. This
should not happen
## Solution
- Use position absolute and a ZIndex of `i32::MAX - 32`
- I also modified the example a little bit to center it correctly. It
only worked previously because the overlay was pushing it down. I also
took the opportunity to simplify the text spawning code a little bit.
# Objective
Implements border radius for UI nodes. Adopted from #8973, but excludes
shadows.
## Solution
- Add a component `BorderRadius` which contains a radius value for each
corner of the UI node.
- Use a fragment shader to generate the rounded corners using a signed
distance function.
<img width="50%"
src="https://github.com/bevyengine/bevy/assets/26204416/16b2ba95-e274-4ce7-adb2-34cc41a776a5"></img>
## Changelog
- `BorderRadius`: New component that holds the border radius values.
- `NodeBundle` & `ButtonBundle`: Added a `border_radius: BorderRadius`
field.
- `extract_uinode_borders`: Stripped down, most of the work is done in
the shader now. Borders are no longer assembled from multiple rects,
instead the shader uses a signed distance function to draw the border.
- `UiVertex`: Added size, border and radius fields.
- `UiPipeline`: Added three vertex attributes to the vertex buffer
layout, to accept the UI node's size, border thickness and border
radius.
- Examples: Added rounded corners to the UI element in the `button`
example, and a `rounded_borders` example.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
- This is an adopted version of #10420
- The objective is to help debugging the Ui layout tree with helpful
outlines, that can be easily enabled/disabled
## Solution
- Like #10420, the solution is using the bevy_gizmos in outlining the
nodes
---
## Changelog
### Added
- Added debug_overlay mod to `bevy_dev_tools`
- Added bevy_ui_debug feature to `bevy_dev_tools`
## How to use
- The user must use `bevy_dev_tools` feature in TOML
- The user must use the plugin UiDebugPlugin, that can be found on
`bevy::dev_tools::debug_overlay`
- Finally, to enable the function, the user must set
`UiDebugOptions::enabled` to true
Someone can easily toggle the function with something like:
```rust
fn toggle_overlay(input: Res<ButtonInput<KeyCode>>, options: ResMut<UiDebugOptions>) {
if input.just_pressed(KeyCode::Space) {
// The toggle method will enable if disabled and disable if enabled
options.toggle();
}
}
```
Note that this feature can be disabled from dev_tools, as its in fact
behind a default feature there, being the feature bevy_ui_debug.
# Limitations
Currently, due to limitations with gizmos itself, it's not possible to
support this feature to more the one window, so this tool is limited to
the primary window only.
# Showcase
Ui example with debug_overlay enabled
And disabled
---------
Co-authored-by: Nicola Papale <nico@nicopap.ch>
Co-authored-by: Pablo Reinhardt <pabloreinhardt@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Simplify implementing some asset traits without Box::pin(async move{})
shenanigans.
Fixes (in part) https://github.com/bevyengine/bevy/issues/11308
## Solution
Use async-fn in traits when possible in all traits. Traits with return
position impl trait are not object safe however, and as AssetReader and
AssetWriter are both used with dynamic dispatch, you need a Boxed
version of these futures anyway.
In the future, Rust is [adding
](https://blog.rust-lang.org/2023/12/21/async-fn-rpit-in-traits.html)proc
macros to generate these traits automatically, and at some point in the
future dyn traits should 'just work'. Until then.... this seemed liked
the right approach given more ErasedXXX already exist, but, no clue if
there's plans here! Especially since these are public now, it's a bit of
an unfortunate API, and means this is a breaking change.
In theory this saves some performance when these traits are used with
static dispatch, but, seems like most code paths go through dynamic
dispatch, which boxes anyway.
I also suspect a bunch of the lifetime annotations on these function
could be simplified now as the BoxedFuture was often the only thing
returned which needed a lifetime annotation, but I'm not touching that
for now as traits + lifetimes can be so tricky.
This is a revival of
[pull/11362](https://github.com/bevyengine/bevy/pull/11362) after a
spectacular merge f*ckup, with updates to the latest Bevy. Just to recap
some discussion:
- Overall this seems like a win for code quality, especially when
implementing these traits, but a loss for having to deal with ErasedXXX
variants.
- `ConditionalSend` was the preferred name for the trait that might be
Send, to deal with wasm platforms.
- When reviewing be sure to disable whitespace difference, as that's 95%
of the PR.
## Changelog
- AssetReader, AssetWriter, AssetLoader, AssetSaver and Process now use
async-fn in traits rather than boxed futures.
## Migration Guide
- Custom implementations of AssetReader, AssetWriter, AssetLoader,
AssetSaver and Process should switch to async fn rather than returning a
bevy_utils::BoxedFuture.
- Simultaniously, to use dynamic dispatch on these traits you should
instead use dyn ErasedXXX.
# Objective
I was wondering why the `lighting` example was still looking quite
different lately (specifically, the intensity of the green light on the
cube) and noticed that we had one more color change I didn't catch
before.
Prior to the `bevy_color` port, `PINK` was actually "deep pink" from the
css4 spec.
`palettes::css::PINK` is now correctly a lighter pink color defined by
the same spec.
```rust
// Bevy 0.13
pub const PINK: Color = Color::rgb(1.0, 0.08, 0.58);
// Bevy 0.14-dev
pub const PINK: Srgba = Srgba::new(1.0, 0.753, 0.796, 1.0);
pub const DEEP_PINK: Srgba = Srgba::new(1.0, 0.078, 0.576, 1.0);
```
## Solution
Change usages of `css::PINK` to `DEEP_PINK` to restore the examples to
their former colors.
# Objective
- Make example alien_cake_addict deterministic so that it's easier to
check for regression
## Solution
- Use a seeded random
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- in example `axes`, the axes are sometime one frame late to follow
their mesh
## Solution
- System `move_cubes` modify the transforms, and `draw_axes` query them
for the axes
- if their order is not specified, it will be random and sometimes axes
are drawn before transforms are updated
- order systems
# Objective
- Improve the code quality of the breakout example
- As a newcomer to `bevy` I was pointed to the breakout example after
the "Getting Started" tutorial
- I'm making this PR because it had a few wrong comments + some
inconsistency in used patterns
## Solution
- Remove references to `wall` in all the collision code as it also
handles bricks and the paddle
- Use the newtype pattern with `bevy::prelude::Deref` for resources
- It was already used for `Velocity` before this PR
- `Scoreboard` is a resource only containing `score`, so it's simpler as
a newtype `Score` resource
- `CollisionSound` is already a newtype, so might as well unify the
access pattern for it
- Added docstrings for `WallLocation::position` and `WallLocation::size`
to explain what they represent
# Objective
- Closes#11793
- Introduces a general API for aligning local coordinates of Transforms
with given vectors.
## Solution
- We introduce `Transform::align`, which allows a rotation to be
specified by four pieces of alignment data, as explained by the
documentation:
````rust
/// Rotates this [`Transform`] so that the `main_axis` vector, reinterpreted in local coordinates, points
/// in the given `main_direction`, while `secondary_axis` points towards `secondary_direction`.
///
/// For example, if a spaceship model has its nose pointing in the X-direction in its own local coordinates
/// and its dorsal fin pointing in the Y-direction, then `align(Vec3::X, v, Vec3::Y, w)` will make the spaceship's
/// nose point in the direction of `v`, while the dorsal fin does its best to point in the direction `w`.
///
/// More precisely, the [`Transform::rotation`] produced will be such that:
/// * applying it to `main_axis` results in `main_direction`
/// * applying it to `secondary_axis` produces a vector that lies in the half-plane generated by `main_direction` and
/// `secondary_direction` (with positive contribution by `secondary_direction`)
///
/// [`Transform::look_to`] is recovered, for instance, when `main_axis` is `Vec3::NEG_Z` (the [`Transform::forward`]
/// direction in the default orientation) and `secondary_axis` is `Vec3::Y` (the [`Transform::up`] direction in the default
/// orientation). (Failure cases may differ somewhat.)
///
/// In some cases a rotation cannot be constructed. Another axis will be picked in those cases:
/// * if `main_axis` or `main_direction` is zero, `Vec3::X` takes its place
/// * if `secondary_axis` or `secondary_direction` is zero, `Vec3::Y` takes its place
/// * if `main_axis` is parallel with `secondary_axis` or `main_direction` is parallel with `secondary_direction`,
/// a rotation is constructed which takes `main_axis` to `main_direction` along a great circle, ignoring the secondary
/// counterparts
///
/// Example
/// ```
/// # use bevy_math::{Vec3, Quat};
/// # use bevy_transform::components::Transform;
/// let mut t1 = Transform::IDENTITY;
/// let mut t2 = Transform::IDENTITY;
/// t1.align(Vec3::ZERO, Vec3::Z, Vec3::ZERO, Vec3::X);
/// t2.align(Vec3::X, Vec3::Z, Vec3::Y, Vec3::X);
/// assert_eq!(t1.rotation, t2.rotation);
///
/// t1.align(Vec3::X, Vec3::Z, Vec3::X, Vec3::Y);
/// assert_eq!(t1.rotation, Quat::from_rotation_arc(Vec3::X, Vec3::Z));
/// ```
pub fn align(
&mut self,
main_axis: Vec3,
main_direction: Vec3,
secondary_axis: Vec3,
secondary_direction: Vec3,
) { //... }
````
- We introduce `Transform::aligned_by`, the returning-Self version of
`align`:
````rust
pub fn aligned_by(
mut self,
main_axis: Vec3,
main_direction: Vec3,
secondary_axis: Vec3,
secondary_direction: Vec3,
) -> Self { //... }
````
- We introduce an example (examples/transforms/align.rs) that shows the
usage of this API. It is likely to be mathier than most other
`Transform` APIs, so when run, the example demonstrates what the API
does in space:
<img width="1440" alt="Screenshot 2024-03-12 at 11 01 19 AM"
src="https://github.com/bevyengine/bevy/assets/2975848/884b3cc3-cbd9-48ae-8f8c-49a677c59dfe">
---
## Changelog
- Added methods `align`, `aligned_by` to `Transform`.
- Added transforms/align.rs to examples.
---
## Discussion
### On the form of `align`
The original issue linked above suggests an API similar to that of the
existing `Transform::look_to` method:
````rust
pub fn align_to(&mut self, direction: Vec3, up: Vec3) { //... }
````
Not allowing an input axis of some sort that is to be aligned with
`direction` would not really solve the problem in the issue, since the
user could easily be in a scenario where they have to compose with
another rotation on their own (undesirable). This leads to something
like:
````rust
pub fn align_to(&mut self, axis: Vec3, direction: Vec3, up: Vec3) { //... }
````
However, this still has two problems:
- If the vector that the user wants to align is parallel to the Y-axis,
then the API basically does not work (we cannot fully specify a
rotation)
- More generally, it does not give the user the freedom to specify which
direction is to be treated as the local "up" direction, so it fails as a
general alignment API
Specifying both leads us to the present situation, with two local axis
inputs (`main_axis` and `secondary_axis`) and two target directions
(`main_direction` and `secondary_direction`). This might seem a little
cumbersome for general use, but for the time being I stand by the
decision not to expand further without prompting from users. I'll expand
on this below.
### Additional APIs?
Presently, this PR introduces only `align` and `aligned_by`. Other
potentially useful bundles of API surface arrange into a few different
categories:
1. Inferring direction from position, a la `Transform::look_at`, which
might look something like this:
````rust
pub fn align_at(&mut self, axis: Vec3, target: Vec3, up: Vec3) {
self.align(axis, target - self.translation, Vec3::Y, up);
}
````
(This is simple but still runs into issues when the user wants to point
the local Y-axis somewhere.)
2. Filling in some data for the user for common use-cases; e.g.:
````rust
pub fn align_x(&mut self, direction: Vec3, up: Vec3) {
self.align(Vec3::X, direction, Vec3::Y, up);
}
````
(Here, use of the `up` vector doesn't lose any generality, but it might
be less convenient to specify than something else. This does naturally
leave open the question of what `align_y` would look like if we provided
it.)
Morally speaking, I do think that the `up` business is more pertinent
when the intention is to work with cameras, which the `look_at` and
`look_to` APIs seem to cover pretty well. If that's the case, then I'm
not sure what the ideal shape for these API functions would be, since it
seems like a lot of input would have to be baked into the function
definitions. For some cases, this might not be the end of the world:
````rust
pub fn align_x_z(&mut self, direction: Vec3, weak_direction: Vec3) {
self.align(Vec3::X, direction, Vec3::Z, weak_direction);
}
````
(However, this is not symmetrical in x and z, so you'd still need six
API functions just to support the standard positive coordinate axes, and
if you support negative axes then things really start to balloon.)
The reasons that these are not actually produced in this PR are as
follows:
1. Without prompting from actual users in the wild, it is unknown to me
whether these additional APIs would actually see a lot of use. Extending
these to our users in the future would be trivial if we see there is a
demand for something specific from the above-mentioned categories.
2. As discussed above, there are so many permutations of these that
could be provided that trying to do so looks like it risks unduly
ballooning the API surface for this feature.
3. Finally, and most importantly, creating these helper functions in
user-space is trivial, since they all just involve specializing `align`
to particular inputs; e.g.:
````rust
fn align_ship(ship_transform: &mut Transform, nose_direction: Vec3, dorsal_direction: Vec3) {
ship_transform.align(Ship::NOSE, nose_direction, Ship::DORSAL, dorsal_direction);
}
````
With that in mind, I would prefer instead to focus on making the
documentation and examples for a thin API as clear as possible, so that
users can get a grip on the tool and specialize it for their own needs
when they feel the desire to do so.
### `Dir3`?
As in the case of `Transform::look_to` and `Transform::look_at`, the
inputs to this function are, morally speaking, *directions* rather than
vectors (actually, if we're being pedantic, the input is *really really*
a pair of orthonormal frames), so it's worth asking whether we should
really be using `Dir3` as inputs instead of `Vec3`. I opted for `Vec3`
for the following reasons:
1. Specifying a `Dir3` in user-space is just more annoying than
providing a `Vec3`. Even in the most basic cases (e.g. providing a
vector literal), you still have to do error handling or call an unsafe
unwrap in your function invocations.
2. The existing API mentioned above uses `Vec3`, so we are just adhering
to the same thing.
Of course, the use of `Vec3` has its own downsides; it can be argued
that the replacement of zero-vectors with fixed ones (which we do in
`Transform::align` as well as `Transform::look_to`) more-or-less amounts
to failing silently.
### Future steps
The question of additional APIs was addressed above. For me, the main
thing here to handle more immediately is actually just upstreaming this
API (or something similar and slightly mathier) to `glam::Quat`. The
reason that this would be desirable for users is that this API currently
only works with `Transform`s even though all it's actually doing is
specifying a rotation. Upstreaming to `glam::Quat`, properly done, could
buy a lot basically for free, since a number of `Transform` methods take
a rotation as an input. Using these together would require a little bit
of mathematical savvy, but it opens up some good things (e.g.
`Transform::rotate_around`).
# Objective
- Adds 3d grids, suggestion of #9400
## Solution
- Added 3d grids (grids spanning all three dimensions, not flat grids)
to bevy_gizmos
---
## Changelog
- `gizmos.grid(...)` and `gizmos.grid_2d(...)` now return a
`GridBuilder2d`.
- Added `gizmos.grid_3d(...)` which returns a `GridBuilder3d`.
- The difference between them is basically only that `GridBuilder3d`
exposes some methods for configuring the z axis while the 2d version
doesn't.
- Allowed for drawing the outer edges along a specific axis by calling
`.outer_edges_x()`, etc. on the builder.
## Additional information
Please note that I have not added the 3d grid to any example as not to
clutter them.
Here is an image of what the 3d grid looks like:
<img width="1440" alt="Screenshot 2024-03-12 at 02 19 55"
src="https://github.com/bevyengine/bevy/assets/62256001/4cd3b7de-cf2c-4f05-8a79-920a4dd804b8">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Scaling `z` by anything but `1.0` in 2d can only lead to bugs and
confusion. See #4149.
## Solution
Use a `Vec2` for the paddle size const, and add a scale of `1.0` later.
This matches the way `BRICK_SIZE` is defined.
# Objective
- no-longer-extant type `WinitConfig` referenced in comments
- `mouse_button_input` refers to `KeyCode` input
- "spacebar" flagged as a typo by RustRover IDE
## Solution
- replace `WinitConfig` with `WinitSettings` in comments
- rename `mouse_button_input` to just `button_input`
- change "spacebar" to "space bar"
# Objective
- Part of #12351
- Add fps overlay
## Solution
- Create `FpsOverlayPlugin`
- Allow for configuration through resource `FpsOverlayConfig`
- Allow for configuration during runtime
### Preview on default settings
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Adds gizmo line joints, suggestion of #9400
## Solution
- Adds `line_joints: GizmoLineJoint` to `GizmoConfig`. Currently the
following values are supported:
- `GizmoLineJoint::None`: does not draw line joints, same behaviour as
previously
- `GizmoLineJoint::Bevel`: draws a single triangle between the lines
- `GizmoLineJoint::Miter` / 'spiky joints': draws two triangles between
the lines extending them until they meet at a (miter) point.
- NOTE: for very small angles between the lines, which happens
frequently in 3d, the miter point will be very far away from the point
at which the lines meet.
- `GizmoLineJoint::Round(resolution)`: Draw a circle arc between the
lines. The circle is a triangle fan of `resolution` triangles.
---
## Changelog
- Added `GizmoLineJoint`, use that in `GizmoConfig` and added necessary
pipelines and draw commands.
- Added a new `line_joints.wgsl` shader containing three vertex shaders
`vertex_bevel`, `vertex_miter` and `vertex_round` as well as a basic
`fragment` shader.
## Migration Guide
Any manually created `GizmoConfig`s must now set the `.line_joints`
field.
## Known issues
- The way we currently create basic closed shapes like rectangles,
circles, triangles or really any closed 2d shape means that one of the
corners will not be drawn with joints, although that would probably be
expected. (see the triangle in the 2d image)
- This could be somewhat mitigated by introducing line caps or fixed by
adding another segment overlapping the first of the strip. (Maybe in a
followup PR?)
- 3d shapes can look 'off' with line joints (especially bevel) because
wherever 3 or more lines meet one of them may stick out beyond the joint
drawn between the other 2.
- Adding additional lines so that there is a joint between every line at
a corner would fix this but would probably be too computationally
expensive.
- Miter joints are 'unreasonably long' for very small angles between the
lines (the angle is the angle between the lines in screen space). This
is technically correct but distracting and does not feel right,
especially in 3d contexts. I think limiting the length of the miter to
the point at which the lines meet might be a good idea.
- The joints may be drawn with a different gizmo in-between them and
their corresponding lines in 2d. Some sort of z-ordering would probably
be good here, but I believe this may be out of scope for this PR.
## Additional information
Some pretty images :)
<img width="1175" alt="Screenshot 2024-03-02 at 04 53 50"
src="https://github.com/bevyengine/bevy/assets/62256001/58df7e63-9376-4430-8871-32adba0cb53b">
- Note that the top vertex does not have a joint drawn.
<img width="1440" alt="Screenshot 2024-03-02 at 05 03 55"
src="https://github.com/bevyengine/bevy/assets/62256001/137a00cf-cbd4-48c2-a46f-4b47492d4fd9">
Now for a weird video:
https://github.com/bevyengine/bevy/assets/62256001/93026f48-f1d6-46fe-9163-5ab548a3fce4
- The black lines shooting out from the cube are miter joints that get
very long because the lines between which they are drawn are (almost)
collinear in screen space.
---------
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
- Improve example from #12299
- Make it frame rate independent
- Make it not randomly random
## Solution
- Transitions between transforms will take 2 seconds instead of 100
frames
- Random is seeded
This is an implementation of RFC #51:
https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md
Note that the implementation strategy is different from the one outlined
in that RFC, because two-phase animation has now landed.
# Objective
Bevy needs animation blending. The RFC for this is [RFC 51].
## Solution
This is an implementation of the RFC. Note that the implementation
strategy is different from the one outlined there, because two-phase
animation has now landed.
This is just a draft to get the conversation started. Currently we're
missing a few things:
- [x] A fully-fleshed-out mechanism for transitions
- [x] A serialization format for `AnimationGraph`s
- [x] Examples are broken, other than `animated_fox`
- [x] Documentation
---
## Changelog
### Added
* The `AnimationPlayer` has been reworked to support blending multiple
animations together through an `AnimationGraph`, and as such will no
longer function unless a `Handle<AnimationGraph>` has been added to the
entity containing the player. See [RFC 51] for more details.
* Transition functionality has moved from the `AnimationPlayer` to a new
component, `AnimationTransitions`, which works in tandem with the
`AnimationGraph`.
## Migration Guide
* `AnimationPlayer`s can no longer play animations by themselves and
need to be paired with a `Handle<AnimationGraph>`. Code that was using
`AnimationPlayer` to play animations will need to create an
`AnimationGraph` asset first, add a node for the clip (or clips) you
want to play, and then supply the index of that node to the
`AnimationPlayer`'s `play` method.
* The `AnimationPlayer::play_with_transition()` method has been removed
and replaced with the `AnimationTransitions` component. If you were
previously using `AnimationPlayer::play_with_transition()`, add all
animations that you were playing to the `AnimationGraph`, and create an
`AnimationTransitions` component to manage the blending between them.
[RFC 51]:
https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- With the recent lighting changes, the default configuration in the
`bloom_3d` example is less clear what bloom actually does
- See [this
screenshot](4fdb1455d5 (r1494648414))
for a comparison.
- `bloom_3d` additionally uses a for-loop to spawn the spheres, which
can be turned into `commands::spawn_batch` call.
- The text is black, which is difficult to see on the gray background.
## Solution
- Increase emmisive values of materials.
- Set text to white.
## Showcase
Before:
<img width="1392" alt="before"
src="https://github.com/bevyengine/bevy/assets/59022059/757057ad-ed9f-4eed-b135-8e2032fcdeb5">
After:
<img width="1392" alt="image"
src="https://github.com/bevyengine/bevy/assets/59022059/3f9dc7a8-94b2-44b9-8ac3-deef1905221b">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Make bevy_utils less of a compilation bottleneck. Tackle #11478.
## Solution
* Move all of the directly reexported dependencies and move them to
where they're actually used.
* Remove the UUID utilities that have gone unused since `TypePath` took
over for `TypeUuid`.
* There was also a extraneous bytemuck dependency on `bevy_core` that
has not been used for a long time (since `encase` became the primary way
to prepare GPU buffers).
* Remove the `all_tuples` macro reexport from bevy_ecs since it's
accessible from `bevy_utils`.
---
## Changelog
Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax,
smallvec, and thiserror).
Removed: bevy_core's reexports of bytemuck.
## Migration Guide
bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror
have been removed.
bevy_core' reexports of bytemuck's types has been removed.
Add them as dependencies in your own crate instead.
# Objective
- We must have googly eyes.
- Also it would be nice if there was an example of a desk toy
application (like the old NEKO.EXE).
## Solution
- Created an example with googly eyed Bevy logo under
examples/games/desktoy.rs.
---
## Changelog
- Added "Desk Toy" game example showcasing window transparency and hit
test.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Fix#12304. Remove unnecessary type registrations thanks to #4154.
## Solution
Conservatively remove type registrations. Keeping the top level
components, resources, and events, but dropping everything else that is
a type of a member of those types.
# Objective
- Make it easier to figure out how to add asset sources
## Solution
- Add an example that adds an asset source, it functions almost
identical to the embedded_asset example
- Move the file from the embedded_asset example into a `files/` folder
# Objective
Fixes#12226
Prior to the `bevy_color` port, `DARK GRAY` used to mean "dark grey."
But it is now lighter than `GRAY`, matching the css4 spec.
## Solution
Change usages of `css::DARK_GRAY` to `Color::srgb(0.25, 0.25, 0.25)` to
restore the examples to their former colors.
With one exception: `display_and_visibility`. I think the new color is
an improvement.
## Note
A lot of these examples could use nicer colors. I'm not trying to revamp
everything here.
The css4 palette is truly a horror. See #12176 and #12080 for some
discussion about alternatives.
# Objective
Fixes#12225
Prior to the `bevy_color` port, `GREEN` used to mean "full green." But
it is now a much darker color matching the css1 spec.
## Solution
Change usages of `basic::GREEN` or `css::GREEN` to `LIME` to restore the
examples to their former colors.
This also removes the duplicate definition of `GREEN` from `css`. (it
was already re-exported from `basic`)
## Note
A lot of these examples could use nicer colors. I'm not trying to do
that here.
"Dark Grey" will be tackled separately and has its own tracking issue.
# Objective
Addresses one of the side-notes in #12225.
Colors in the `basic` palette are inconsistent in a few ways:
- `CYAN` was named `AQUA` in the referenced spec. (an alias was added in
a later spec)
- Colors are defined with e.g. "half green" having a `g` value of `0.5`.
But any spec would have been based on 8-bit color, so `0x80 / 0xFF` or
`128 / 255` or ~`0.502`. This precision is likely meaningful when doing
color math/rounding.
## Solution
Regenerate the colors from
https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=37563bedc8858033bd8b8380328c5230
# Objective
Follow up to #11600 and #10588https://github.com/bevyengine/bevy/issues/11944 made clear that some
people want to use slicing with texture atlases
## Changelog
* Added support for `TextureAtlas` slicing and tiling.
`SpriteSheetBundle` and `AtlasImageBundle` can now use `ImageScaleMode`
* Added new `ui_texture_atlas_slice` example using a texture sheet
<img width="798" alt="Screenshot 2024-02-23 at 11 58 35"
src="https://github.com/bevyengine/bevy/assets/26703856/47a8b764-127c-4a06-893f-181703777501">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
When doing a final pass for #3362, it appeared that `ComponentStorage`
as a trait, the two types implementing it, and the associated type on
`Component` aren't really necessary anymore. This likely was due to an
earlier constraint on the use of consts in traits, but that definitely
doesn't seem to be a problem in Rust 1.76.
## Solution
Remove them.
---
## Changelog
Changed: `Component::Storage` has been replaced with
`Component::STORAGE_TYPE` as a const.
Removed: `bevy::ecs::component::ComponentStorage` trait
Removed: `bevy::ecs::component::TableStorage` struct
Removed: `bevy::ecs::component::SparseSetStorage` struct
## Migration Guide
If you were manually implementing `Component` instead of using the
derive macro, replace the associated `Storage` associated type with the
`STORAGE_TYPE` const:
```rust
// in Bevy 0.13
impl Component for MyComponent {
type Storage = TableStorage;
}
// in Bevy 0.14
impl Component for MyComponent {
const STORAGE_TYPE: StorageType = StorageType::Table;
}
```
Component is no longer object safe. If you were relying on `&dyn
Component`, `Box<dyn Component>`, etc. please [file an issue
](https://github.com/bevyengine/bevy/issues) to get [this
change](https://github.com/bevyengine/bevy/pull/12311) reverted.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- After https://github.com/bevyengine/bevy/pull/11165, example `ui` is
not pretty as it displays the Bevy logo on a white background, with a
comment that is now wrong
## Solution
- Remove the background color
# Objective
- Follow-up to #12211
- Introduces an example project that demonstrates the implementation and
behavior of `Gizmos::axes` for an entity with a `Transform` component.
## Solution
In order to demonstrate how `Gizmo::axes` can be used and behaves in
practice, we introduce an example of a simple scene containing a pair of
cuboids locked in a grotesque, inscrutable dance: the two are repeatedly
given random `Transform`s which they interpolate to, showing how the
axes move with objects as they translate, rotate, and scale.
<img width="1023" alt="Screenshot 2024-03-04 at 1 16 33 PM"
src="https://github.com/bevyengine/bevy/assets/2975848/c1ff4794-6722-491c-8522-f59801645139">
On the implementation side, we demonstrate how to draw axes for
entities, automatically sizing them according to their bounding boxes
(so that the axes will be visible):
````rust
fn draw_axes(mut gizmos: Gizmos, query: Query<(&Transform, &Aabb), With<ShowAxes>>) {
for (&transform, &aabb) in &query {
let length = aabb.half_extents.length();
gizmos.axes(transform, length);
}
}
````
---
## Changelog
- Created examples/gizmos/axes.rs.
- Added 'axes' example to Cargo.toml.
# Objective
Resolves#4154
Currently, registration must all be done manually:
```rust
#[derive(Reflect)]
struct Foo(Bar);
#[derive(Reflect)]
struct Bar(Baz);
#[derive(Reflect)]
struct Baz(usize);
fn main() {
// ...
app
.register_type::<Foo>()
.register_type::<Bar>()
.register_type::<Baz>()
// .register_type::<usize>() <- This one is handled by Bevy, thankfully
// ...
}
```
This can grow really quickly and become very annoying to add, remove,
and update as types change. It would be great if we could help reduce
the number of types that a user must manually implement themselves.
## Solution
As suggested in #4154, this PR adds automatic recursive registration.
Essentially, when a type is registered, it may now also choose to
register additional types along with it using the new
`GetTypeRegistration::register_type_dependencies` trait method.
The `Reflect` derive macro now automatically does this for all fields in
structs, tuple structs, struct variants, and tuple variants. This is
also done for tuples, arrays, `Vec<T>`, `HashMap<K, V>`, and
`Option<T>`.
This allows us to simplify the code above like:
```rust
#[derive(Reflect)]
struct Foo(Bar);
#[derive(Reflect)]
struct Bar(Baz);
#[derive(Reflect)]
struct Baz(usize);
fn main() {
// ...
app.register_type::<Foo>()
// ...
}
```
This automatic registration only occurs if the type has not yet been
registered. If it has been registered, we simply skip it and move to the
next one. This reduces the cost of registration and prevents overwriting
customized registrations.
## Considerations
While this does improve ergonomics on one front, it's important to look
at some of the arguments against adopting a PR like this.
#### Generic Bounds
~~Since we need to be able to register the fields individually, we need
those fields to implement `GetTypeRegistration`. This forces users to
then add this trait as a bound on their generic arguments. This
annoyance could be relieved with something like #5772.~~
This is no longer a major issue as the `Reflect` derive now adds the
`GetTypeRegistration` bound by default. This should technically be okay,
since we already add the `Reflect` bound.
However, this can also be considered a breaking change for manual
implementations that left out a `GetTypeRegistration` impl ~~or for
items that contain dynamic types (e.g. `DynamicStruct`) since those also
do not implement `GetTypeRegistration`~~.
#### Registration Assumptions
By automatically registering fields, users might inadvertently be
relying on certain types to be automatically registered. If `Foo`
auto-registers `Bar`, but `Foo` is later removed from the code, then
anywhere that previously used or relied on `Bar`'s registration would
now fail.
---
## Changelog
- Added recursive type registration to structs, tuple structs, struct
variants, tuple variants, tuples, arrays, `Vec<T>`, `HashMap<K, V>`, and
`Option<T>`
- Added a new trait in the hidden `bevy_reflect::__macro_exports` module
called `RegisterForReflection`
- Added `GetTypeRegistration` impl for
`bevy_render::render_asset::RenderAssetUsages`
## Migration Guide
All types that derive `Reflect` will now automatically add
`GetTypeRegistration` as a bound on all (unignored) fields. This means
that all reflected fields will need to also implement
`GetTypeRegistration`.
If all fields **derive** `Reflect` or are implemented in `bevy_reflect`,
this should not cause any issues. However, manual implementations of
`Reflect` that excluded a `GetTypeRegistration` impl for their type will
need to add one.
```rust
#[derive(Reflect)]
struct Foo<T: FromReflect> {
data: MyCustomType<T>
}
// OLD
impl<T: FromReflect> Reflect for MyCustomType<T> {/* ... */}
// NEW
impl<T: FromReflect + GetTypeRegistration> Reflect for MyCustomType<T> {/* ... */}
impl<T: FromReflect + GetTypeRegistration> GetTypeRegistration for MyCustomType<T> {/* ... */}
```
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: radiish <cb.setho@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
In my library,
[`bevy_dev_console`](https://github.com/doonv/bevy_dev_console) I need
access to `App` within `LogPlugin::update_subscriber` in order to
communicate with the `App` from my custom `Layer`.
## Solution
Give access to `App`.
---
## Changelog
- Added access to `App` within `LogPlugin::update_subscriber`
## Migration Guide
`LogPlugin::update_subscriber` now has a `&mut App` parameter. If you
don't need access to `App`, you can ignore the parameter with an
underscore (`_`).
```diff,rust
- fn update_subscriber(subscriber: BoxedSubscriber) -> BoxedSubscriber {
+ fn update_subscriber(_: &mut App, subscriber: BoxedSubscriber) -> BoxedSubscriber {
Box::new(subscriber.with(CustomLayer))
}
```
# Objective
Fixes https://github.com/bevyengine/bevy/issues/11157.
## Solution
Stop using `BackgroundColor` as a color tint for `UiImage`. Add a
`UiImage::color` field for color tint instead. Allow a UI node to
simultaneously include a solid-color background and an image, with the
image rendered on top of the background (this is already how it works
for e.g. text).
---
## Changelog
- The `BackgroundColor` component now renders a solid-color background
behind `UiImage` instead of tinting its color.
- Removed `BackgroundColor` from `ImageBundle`, `AtlasImageBundle`, and
`ButtonBundle`.
- Added `UiImage::color`.
- Expanded `RenderUiSystem` variants.
- Renamed `bevy_ui::extract_text_uinodes` to `extract_uinodes_text` for
consistency.
## Migration Guide
- `BackgroundColor` no longer tints the color of UI images. Use
`UiImage::color` for that instead.
- For solid color buttons, replace `ButtonBundle { background_color:
my_color.into(), ... }` with `ButtonBundle { image:
UiImage::default().with_color(my_color), ... }`, and update button
interaction systems to use `UiImage::color` instead of `BackgroundColor`
as well.
- `bevy_ui::RenderUiSystem::ExtractNode` has been split into
`ExtractBackgrounds`, `ExtractImages`, `ExtractBorders`, and
`ExtractText`.
- `bevy_ui::extract_uinodes` has been split into
`bevy_ui::extract_uinode_background_colors` and
`bevy_ui::extract_uinode_images`.
- `bevy_ui::extract_text_uinodes` has been renamed to
`extract_uinode_text`.
# Objective
After the `TextureAtlas` changes that landed in 0.13,
`SpriteSheetBundle` is equivalent to `TextureAtlas` + `SpriteBundle` and
`AtlasImageBundle` is equivalent to `TextureAtlas` + `ImageBundle`. As
such, the atlas bundles aren't particularly useful / necessary additions
to the API anymore.
In addition, atlas bundles are inconsistent with `ImageScaleMode` (also
introduced in 0.13) which doesn't have its own version of each image
bundle.
## Solution
Deprecate `SpriteSheetBundle` and `AtlasImageBundle` in favor of
including `TextureAtlas` as a separate component alongside
`SpriteBundle` and `ImageBundle`, respectively.
---
## Changelog
- Deprecated `SpriteSheetBundle` and `AtlasImageBundle`.
## Migration Guide
- `SpriteSheetBundle` has been deprecated. Use `TextureAtlas` alongside
a `SpriteBundle` instead.
- `AtlasImageBundle` has been deprecated. Use `TextureAtlas` alongside
an `ImageBundle` instead.
# Objective
- Part of #9400.
- Add light gizmos for `SpotLight`, `PointLight` and `DirectionalLight`.
## Solution
- Add a `ShowLightGizmo` and its related gizmo group and plugin, that
shows a gizmo for all lights of an entities when inserted on it. Light
display can also be toggled globally through the gizmo config in the
same way it can already be done for `Aabb`s.
- Add distinct segment setters for height and base one `Cone3dBuilder`.
This allow having a properly rounded base without too much edges along
the height. The doc comments explain how to ensure height and base
connect when setting different values.
Gizmo for the three light types without radius with the depth bias set
to -1:
With Radius:
Possible future improvements:
- Add a billboarded sprite with a distinct sprite for each light type.
- Display the intensity of the light somehow (no idea how to represent
that apart from some text).
---
## Changelog
### Added
- The new `ShowLightGizmo`, part of the `LightGizmoPlugin` and
configurable globally with `LightGizmoConfigGroup`, allows drawing gizmo
for `PointLight`, `SpotLight` and `DirectionalLight`. The gizmos color
behavior can be controlled with the `LightGizmoColor` member of
`ShowLightGizmo` and `LightGizmoConfigGroup`.
- The cone gizmo builder (`Cone3dBuilder`) now allows setting a
differing number of segments for the base and height.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Follow up to #11057
Implemented suggestions from reviewers from: a simpler
fit_canvas_to_parent leads to an explicit CSS setting to the canvas.
From my understanding, it has do be set after wgpu creation due to wgpu
overriding the canvas width/height:
4400a58470/examples/src/utils.rs (L68-L74)
# Changelog
- Re-enable a `fit_canvas_to_parent`, it's removal from
https://github.com/bevyengine/bevy/pull/11057 was problematic. Still,
its inner working is more simple than before: bevy doesn't handle its
resizing, winit does.
## Migration Guide
- Cancels the migration from
https://github.com/bevyengine/bevy/pull/11057
# Objective
Fixes https://github.com/bevyengine/bevy/issues/11628
## Migration Guide
`Command` and `CommandQueue` have migrated from `bevy_ecs::system` to
`bevy_ecs::world`, so `use bevy_ecs::world::{Command, CommandQueue};`
when necessary.
# Objective
- Fix mismatch between the `Component` trait method and the `World`
method.
## Solution
- Replace init_component_info with register_component_hooks.
# Objective
This PR unpins `web-sys` so that unrelated projects that have
`bevy_render` in their workspace can finally update their `web-sys`.
More details in and fixes#12246.
## Solution
* Update `wgpu` from 0.19.1 to 0.19.3.
* Remove the `web-sys` pin.
* Update docs and wasm helper to remove the now-stale
`--cfg=web_sys_unstable_apis` Rust flag.
---
## Changelog
Updated `wgpu` to v0.19.3 and removed `web-sys` pin.
This is an implementation within `bevy_window::window` that fixes
#12229.
# Objective
Fixes#12229, allow users to retrieve the window's size and physical
size as Vectors without having to manually construct them using
`height()` and `width()` or `physical_height()` and `physical_width()`
## Solution
As suggested in #12229, created two public functions within `window`:
`size() -> Vec` and `physical_size() -> UVec` that return the needed
Vectors ready-to-go.
### Discussion
My first FOSS PRQ ever, so bear with me a bit. I'm new to this.
- I replaced instances of ```Vec2::new(window.width(),
window.height());``` or `UVec2::new(window.physical_width(),
window.physical_height());` within bevy examples be replaced with their
`size()`/`physical_size()` counterparts?
- Discussion within #12229 still holds: should these also be added to
WindowResolution?
Although we cached hashes of `MeshVertexBufferLayout`, we were paying
the cost of `PartialEq` on `InnerMeshVertexBufferLayout` for every
entity, every frame. This patch changes that logic to place
`MeshVertexBufferLayout`s in `Arc`s so that they can be compared and
hashed by pointer. This results in a 28% speedup in the
`queue_material_meshes` phase of `many_cubes`, with frustum culling
disabled.
Additionally, this patch contains two minor changes:
1. This commit flattens the specialized mesh pipeline cache to one level
of hash tables instead of two. This saves a hash lookup.
2. The example `many_cubes` has been given a `--no-frustum-culling`
flag, to aid in benchmarking.
See the Tracy profile:
<img width="1064" alt="Screenshot 2024-02-29 144406"
src="https://github.com/bevyengine/bevy/assets/157897/18632f1d-1fdd-4ac7-90ed-2d10306b2a1e">
## Migration guide
* Duplicate `MeshVertexBufferLayout`s are now combined into a single
object, `MeshVertexBufferLayoutRef`, which contains an
atomically-reference-counted pointer to the layout. Code that was using
`MeshVertexBufferLayout` may need to be updated to use
`MeshVertexBufferLayoutRef` instead.
# Objective
- Provide a reliable and performant mechanism to allows users to keep
components synchronized with external sources: closing/opening sockets,
updating indexes, debugging etc.
- Implement a generic mechanism to provide mutable access to the world
without allowing structural changes; this will not only be used here but
is a foundational piece for observers, which are key for a performant
implementation of relations.
## Solution
- Implement a new type `DeferredWorld` (naming is not important,
`StaticWorld` is also suitable) that wraps a world pointer and prevents
user code from making any structural changes to the ECS; spawning
entities, creating components, initializing resources etc.
- Add component lifecycle hooks `on_add`, `on_insert` and `on_remove`
that can be assigned callbacks in user code.
---
## Changelog
- Add new `DeferredWorld` type.
- Add new world methods: `register_component::<T>` and
`register_component_with_descriptor`. These differ from `init_component`
in that they provide mutable access to the created `ComponentInfo` but
will panic if the component is already in any archetypes. These
restrictions serve two purposes:
1. Prevent users from defining hooks for components that may already
have associated hooks provided in another plugin. (a use case better
served by observers)
2. Ensure that when an `Archetype` is created it gets the appropriate
flags to early-out when triggering hooks.
- Add methods to `ComponentInfo`: `on_add`, `on_insert` and `on_remove`
to be used to register hooks of the form `fn(DeferredWorld, Entity,
ComponentId)`
- Modify `BundleInserter`, `BundleSpawner` and `EntityWorldMut` to
trigger component hooks when appropriate.
- Add bit flags to `Archetype` indicating whether or not any contained
components have each type of hook, this can be expanded for other flags
as needed.
- Add `component_hooks` example to illustrate usage. Try it out! It's
fun to mash keys.
## Safety
The changes to component insertion, removal and deletion involve a large
amount of unsafe code and it's fair for that to raise some concern. I
have attempted to document it as clearly as possible and have confirmed
that all the hooks examples are accepted by `cargo miri` as not causing
any undefined behavior. The largest issue is in ensuring there are no
outstanding references when passing a `DeferredWorld` to the hooks which
requires some use of raw pointers (as was already happening to some
degree in those places) and I have taken some time to ensure that is the
case but feel free to let me know if I've missed anything.
## Performance
These changes come with a small but measurable performance cost of
between 1-5% on `add_remove` benchmarks and between 1-3% on `insert`
benchmarks. One consideration to be made is the existence of the current
`RemovedComponents` which is on average more costly than the addition of
`on_remove` hooks due to the early-out, however hooks doesn't completely
remove the need for `RemovedComponents` as there is a chance you want to
respond to the removal of a component that already has an `on_remove`
hook defined in another plugin, so I have not removed it here. I do
intend to deprecate it with the introduction of observers in a follow up
PR.
## Discussion Questions
- Currently `DeferredWorld` implements `Deref` to `&World` which makes
sense conceptually, however it does cause some issues with rust-analyzer
providing autocomplete for `&mut World` references which is annoying.
There are alternative implementations that may address this but involve
more code churn so I have attempted them here. The other alternative is
to not implement `Deref` at all but that leads to a large amount of API
duplication.
- `DeferredWorld`, `StaticWorld`, something else?
- In adding support for hooks to `EntityWorldMut` I encountered some
unfortunate difficulties with my desired API. If commands are flushed
after each call i.e. `world.spawn() // flush commands .insert(A) //
flush commands` the entity may be despawned while `EntityWorldMut` still
exists which is invalid. An alternative was then to add
`self.world.flush_commands()` to the drop implementation for
`EntityWorldMut` but that runs into other problems for implementing
functions like `into_unsafe_entity_cell`. For now I have implemented a
`.flush()` which will flush the commands and consume `EntityWorldMut` or
users can manually run `world.flush_commands()` after using
`EntityWorldMut`.
- In order to allowing querying on a deferred world we need
implementations of `WorldQuery` to not break our guarantees of no
structural changes through their `UnsafeWorldCell`. All our
implementations do this, but there isn't currently any safety
documentation specifying what is or isn't allowed for an implementation,
just for the caller, (they also shouldn't be aliasing components they
didn't specify access for etc.) is that something we should start doing?
(see 10752)
Please check out the example `component_hooks` or the tests in
`bundle.rs` for usage examples. I will continue to expand this
description as I go.
See #10839 for a more ergonomic API built on top of this one that isn't
subject to the same restrictions and supports `SystemParam` dependency
injection.
# Objective / Solution
- Use `Hsla` for the color constants (Fixes#12203)
And a few other improvements:
- Make contributor colors persistent between runs
- Move text to top left where the birbs can't reach and add padding
- Remove `Contributor:` text. It's obvious what is being shown from
context, and then we can remove `has_triggered`.
- Show the number of commits authored
- Some system names were postfixed with `_system` and some weren't.
Removed `_system` for consistency.
- Clean up collision code slightly with a bounding volume
- Someone accidentally typed "bird" instead of "birb" in one comment.
- Other misc. cleanup
## Before
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/200550/9c6229d6-313a-464d-8a97-0220aa16901f">
## After
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/200550/0c00e95b-2f50-4f50-b177-def4ca405313">
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Split up from #12017, rename Bevy's direction types.
Currently, Bevy has the `Direction2d`, `Direction3d`, and `Direction3dA`
types, which provide a type-level guarantee that their contained vectors
remain normalized. They can be very useful for a lot of APIs for safety,
explicitness, and in some cases performance, as they can sometimes avoid
unnecessary normalizations.
However, many consider them to be inconvenient to use, and opt for
standard vector types like `Vec3` because of this. One reason is that
the direction type names are a bit long and can be annoying to write (of
course you can use autocomplete, but just typing `Vec3` is still nicer),
and in some intances, the extra characters can make formatting worse.
The naming is also inconsistent with Glam's shorter type names, and
results in names like `Direction3dA`, which (in my opinion) are
difficult to read and even a bit ugly.
This PR proposes renaming the types to `Dir2`, `Dir3`, and `Dir3A`.
These names are nice and easy to write, consistent with Glam, and work
well for variants like the SIMD aligned `Dir3A`. As a bonus, it can also
result in nicer formatting in a lot of cases, which can be seen from the
diff of this PR.
Some examples of what it looks like: (copied from #12017)
```rust
// Before
let ray_cast = RayCast2d::new(Vec2::ZERO, Direction2d::X, 5.0);
// After
let ray_cast = RayCast2d::new(Vec2::ZERO, Dir2::X, 5.0);
```
```rust
// Before (an example using Bevy XPBD)
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Direction3d::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
// After
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Dir3::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
```
```rust
// Before
self.circle(
Vec3::new(0.0, -2.0, 0.0),
Direction3d::Y,
5.0,
Color::TURQUOISE,
);
// After (formatting is collapsed in this case)
self.circle(Vec3::new(0.0, -2.0, 0.0), Dir3::Y, 5.0, Color::TURQUOISE);
```
## Solution
Rename `Direction2d`, `Direction3d`, and `Direction3dA` to `Dir2`,
`Dir3`, and `Dir3A`.
---
## Migration Guide
The `Direction2d` and `Direction3d` types have been renamed to `Dir2`
and `Dir3`.
## Additional Context
This has been brought up on the Discord a few times, and we had a small
[poll](https://discord.com/channels/691052431525675048/1203087353850364004/1212465038711984158)
on this. `Dir2`/`Dir3`/`Dir3A` was quite unanimously chosen as the best
option, but of course it was a very small poll and inconclusive, so
other opinions are certainly welcome too.
---------
Co-authored-by: IceSentry <c.giguere42@gmail.com>
# Objective
- Implement grid gizmos, suggestion of #9400
## Solution
- Added `gizmos.grid(...) ` and `gizmos.grid_2d(...)`
- The grids may be configured using `.outer_edges(...)` to specify
whether to draw the outer border/edges of the grid and `.skew(...)`to
specify the skew of the grid along the x or y directions.
---
## Changelog
- Added a `grid` module to `bevy_gizmos` containing `gizmos.grid(...) `
and `gizmos.grid_2d(...)` as well as assorted items.
- Updated the `2d_gizmos` and `3d_gizmos` examples to use grids.
## Additional
The 2D and 3D examples now look like this:
<img width="1440" alt="Screenshot 2024-02-20 at 15 09 40"
src="https://github.com/bevyengine/bevy/assets/62256001/ce04191e-d839-4faf-a6e3-49b6bb4b922b">
<img width="1440" alt="Screenshot 2024-02-20 at 15 10 07"
src="https://github.com/bevyengine/bevy/assets/62256001/317459ba-d452-42eb-ae95-7c84cdbd569b">
# Objective
- Fixes#9670
- Avoid a crash in CI due to
```
thread 'Compute Task Pool (0)' panicked at /Users/runner/.cargo/registry/src/index.crates.io-6f17d22bba15001f/wgpu-0.19.1/src/backend/wgpu_core.rs:3009:5:
wgpu error: Validation Error
Caused by:
In Device::create_bind_group
The adapter does not support read access for storages texture of format Rgba8Unorm
```
## Solution
- Use an `R32Float` texture instead of an `Rgba8Unorm` as it's a tier 1
texture format https://github.com/gpuweb/gpuweb/issues/3838 and is more
supported
- This should also improve support for webgpu in the next wgpu version
# Objective
On some platforms (observed on Windows and Linux, works fine on web),
velocity of all entities would be initialized to zero, making them
simply fall into the star.
## Solution
Using `Time<Fixed>::timestep` instead of `Time::delta_seconds` to
initialize velocity. Since the entities are generated in the startup
schedule, no time has elapsed yet and `Time::delta_seconds` would return
zero on some platforms. `Time<Fixed>::timestep` will always return the
expected time step of `FixedUpdate` schedule.
# Objective
`FromWorld` is often used to group loading and creation of assets for
resources.
With this setup, users often end up repetitively calling
`.resource::<AssetServer>` and `.resource_mut::<Assets<T>>`, and may
have difficulties handling lifetimes of the returned references.
## Solution
Add extension methods to `World` to add and load assets, through a new
extension trait defined in `bevy_asset`.
### Other considerations
* This might be a bit too "magic", as it makes implicit the resource
access.
* We could also implement `DirectAssetAccessExt` on `App`, but it didn't
feel necessary, as `FromWorld` is the principal use-case here.
---
## Changelog
* Add the `DirectAssetAccessExt` trait, which adds the `add_asset`,
`load_asset` and `load_asset_with_settings` method to the `World` type.
# Objective
- Fixes#12001.
- Note this PR doesn't change any feature flags, however flaky the issue
revealed they are.
## Solution
- Use `FromReflect` to convert proxy types to concrete ones in
`ReflectSerialize::get_serializable`.
- Use `get_represented_type_info() -> type_id()` to get the correct type
id to interact with the registry in
`bevy_reflect::serde::ser::get_serializable`.
---
## Changelog
- Registering `ReflectSerialize` now imposes additional `FromReflect`
and `TypePath` bounds.
## Migration Guide
- If `ReflectSerialize` is registered on a type, but `TypePath` or
`FromReflect` implementations are omitted (perhaps by
`#[reflect(type_path = false)` or `#[reflect(from_reflect = false)]`),
the traits must now be implemented.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
The example showcase doesn't seem to work well with the portrait aspect
ratio used in this example, which is possibly something to be fixed
there, but there's also no reason this *needs* a custom size.
This custom window size is also sightly too tall for my particular
display which is a very common display size when accounting for the
macOS task bar and window title, so the content at the bottom is
clipped.
## Solution
- Remove the custom window size
- Swap the order of the justify / align nested loops so that the content
fits the new aspect ratio
- Make the containers responsive to window size, and make all the gaps
even
## Before
<img width="870" alt="Screenshot 2024-02-15 at 10 56 11 AM"
src="https://github.com/bevyengine/bevy/assets/200550/803217dd-e311-4f9e-aabf-2656f7f67615">
## After
<img width="1280" alt="Screenshot 2024-02-15 at 10 56 25 AM"
src="https://github.com/bevyengine/bevy/assets/200550/bf1e4920-f053-4d42-ab0b-3efea6835cae">
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The `many_lights` example uses a for-loop around `commands.spawn`.
- It is generally recommended to use `spawn_batch` instead to lazily
spawn entities, because it doesn't massively grow the command queue.
## Solution
- Use `spawn_batch` in `many_lights` example.
---
## Discussion
- `thread_rng` is called for each light spawned. This is a simple
thread-local `Rc` clone, so it should compile down to a copy and an
increment + decrement instruction.
- I created `golden_ration` outside of the closure and `move`d it in.
This should just be a copy and hopefully will get const-evaluated away.
Would it be better to just move it into the closure itself?
## Performance
Using `spawn_batch` seems to decrease time-to-first-`Update` by 0.1s:
1.3s to 1.2s.
<details>
<summary>Raw data and how it was collected.</summary>
Before:
- 2024-02-19T15:18:57.650987Z to 2024-02-19T15:18:58.912244Z : 1.3
- 2024-02-19T15:19:25.277135Z to 2024-02-19T15:19:26.542092Z : 1.3
- 2024-02-19T15:19:46.841460Z to 2024-02-19T15:19:48.137560Z : 1.3
After:
- 2024-02-19T15:17:05.749521Z to 2024-02-19T15:17:06.993221Z : 1.2
- 2024-02-19T15:17:38.153049Z to 2024-02-19T15:17:39.393760Z : 1.2
- 2024-02-19T15:18:10.691562Z to 2024-02-19T15:18:11.891430Z : 1.2
To time performance, I tracked the time from the first `Startup` logged
message to the first `Update` logged message.
```shell
$ cargo run --release --example many_lights
Compiling bevy v0.13.0 (/Users/bdeep/dev/bevy/bevy)
Finished release [optimized] target(s) in 1.54s
Running `target/release/examples/many_lights`
# THIS TIME
2024-02-19T15:30:13.429609Z INFO bevy_render::renderer: AdapterInfo { name: "Apple M1", vendor: 0, device: 0, device_type: IntegratedGpu, driver: "", driver_info: "", backend: Metal }
2024-02-19T15:30:13.566856Z INFO bevy_winit::system: Creating new window "many_lights" (0v1)
2024-02-19T15:30:13.592371Z WARN many_lights: This is a stress test used to push Bevy to its limit and debug performance issues. It is not representative of an actual game. It must be run in release mode using --release or it will be very slow.
2024-02-19T15:30:13.592572Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "MacOS 14.2.1 ", kernel: "23.2.0", cpu: "Apple M1", core_count: "8", memory: "16.0 GiB" }
# TO THIS TIME
2024-02-19T15:30:15.429900Z INFO many_lights: Lights: 100000
2024-02-19T15:30:15.430139Z INFO bevy diagnostic: fps : 0.982693 (avg 43.026557)
2024-02-19T15:30:15.430157Z INFO bevy diagnostic: frame_time : 1017.611750ms (avg 149.456476ms)
2024-02-19T15:30:15.430165Z INFO bevy diagnostic: frame_count: 12.000000 (avg 6.000000)
```
</details>
# Objective
Split up from #12017, add an aligned version of `Direction3d` for SIMD,
and move direction types out of `primitives`.
## Solution
Add `Direction3dA` and move direction types into a new `direction`
module.
---
## Migration Guide
The `Direction2d`, `Direction3d`, and `InvalidDirectionError` types have
been moved out of `bevy::math::primitives`.
Before:
```rust
use bevy::math::primitives::Direction3d;
```
After:
```rust
use bevy::math::Direction3d;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
```
$ xcrun simctl devices list
Unrecognized subcommand: devices
usage: simctl [--set <path>] [--profiles <path>] <subcommand> ...
simctl help [subcommand]
Command line utility to control the Simulator
```
# Objective
- The `examples/README.md` contains an invalid example command for
listing iOS devices using `xcrun`.
## Solution
- Update example command to omit the current invalid subcommand
"`devices`".
# Objective
- The 3D Lighting example is meant to show using multiple lights in the
same scene.
- It currently looks very dark. (See [this
image](4fdb1455d5 (r1494653511)).)
- Resetting the physical camera properties sets the shutter speed to 1 /
125, even though it initially starts at 1 / 100.
## Solution
- Increase the intensity of all 3 lights in the example.
- Now it is much closer to the example in Bevy 0.12.
- I had to remove the comment explaining the lightbulb equivalent of the
intensities because I don't know how it was calculated. Does anyone know
what light emits 100,000 lumens?
- Set the initial shutter speed to 1 / 125.
## Showcase
Before:
<img width="1392" alt="before"
src="https://github.com/bevyengine/bevy/assets/59022059/ac353e02-58e9-4661-aa6d-e5fdf0dcd2f6">
After:
<img width="1392" alt="after"
src="https://github.com/bevyengine/bevy/assets/59022059/4ff0beb6-0ced-4fb2-a953-04be2c77f437">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The physical width and height (pixels) of an image is always integers,
but for `GpuImage` bevy currently stores them as `Vec2` (`f32`).
Switching to `UVec2` makes this more consistent with the [underlying
texture data](https://docs.rs/wgpu/latest/wgpu/struct.Extent3d.html).
I'm not sure if this is worth the change in the surface level API. If
not, feel free to close this PR.
## Solution
- Replace uses of `Vec2` with `UVec2` when referring to texture
dimensions.
- Use integer types for the texture atlas dimensions and sections.
[`Sprite::rect`](a81a2d1da3/crates/bevy_sprite/src/sprite.rs (L29))
remains unchanged, so manually specifying a sub-pixel region of an image
is still possible.
---
## Changelog
- `GpuImage` now stores its size as `UVec2` instead of `Vec2`.
- Texture atlases store their size and sections as `UVec2` and `URect`
respectively.
- `UiImageSize` stores its size as `UVec2`.
## Migration Guide
- Change floating point types (`Vec2`, `Rect`) to their respective
unsigned integer versions (`UVec2`, `URect`) when using `GpuImage`,
`TextureAtlasLayout`, `TextureAtlasBuilder`,
`DynamicAtlasTextureBuilder` or `FontAtlas`.
# Objective
- Add the new `-Zcheck-cfg` checks to catch more warnings
- Fixes#12091
## Solution
- Create a new `cfg-check` to the CI that runs `cargo check -Zcheck-cfg
--workspace` using cargo nightly (and fails if there are warnings)
- Fix all warnings generated by the new check
---
## Changelog
- Remove all redundant imports
- Fix cfg wasm32 targets
- Add 3 dead code exceptions (should StandardColor be unused?)
- Convert ios_simulator to a feature (I'm not sure if this is the right
way to do it, but the check complained before)
## Migration Guide
No breaking changes
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- Example reflection_probe is not frame rate independent
## Solution
- Use time delta to rotate the camera, use the same rotation speed as
the load_gltf example
31d7fcd9cb/examples/3d/load_gltf.rs (L63)
---
# Objective
Move Gizmo examples into the separate directory
Fixes#11899
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
While doing a bunch of testing on examples, I noticed that this
particular example had lots of room for improvement. This example is
shown in example showcase, so it might as well look nice.
- The "overflow containers" have no vertical separation from each other
- The "overflow containers" are aligned awkwardly
- The instructions say you can "toggle" overflow, but it's actually
cycling through various overflow modes, with no indication of which mode
is currently active.
- The UI structure could be simplified
## Solution
- Simplify the UI structure by
- Moving the instructions into an absolutely positioned node, which we
do in most other examples with instructions
- Using a grid layout and removing some unnecessary containers
- Show the current overflow mode
- Add a gap between the overflow containers
- Other misc cleanup
## Before / After
<img width="1280" alt="Screenshot 2024-02-15 at 9 48 02 AM"
src="https://github.com/bevyengine/bevy/assets/200550/046e53b3-f744-48a2-b5ac-24b3f35b64ca">
<img width="1280" alt="Screenshot 2024-02-15 at 9 48 26 AM"
src="https://github.com/bevyengine/bevy/assets/200550/7e5e4ecf-dd1d-440a-b4a8-dd43bee3ef0a">
# Objective
- Closes#9384.
## Solution
- Make the movement speed of the `CameraController` adjustable with the
scroll wheel as mentioned
[here](https://github.com/bevyengine/bevy/issues/9384#issuecomment-1668957931).
The speed use an exponential progression (10% increase per scroll tick
by default) to allow adapting the speed to different scales.
- For the `scene_viewer` example, make the default speed proportional to
the size of the scene using what's computed for the default camera
placement. This gives a good enough default to fly over the scene from
the outside. I don't think there's a good way to get a default speed
fitting for all scenes since some are meant to be viewed from outside
while other are traversable environments.
# Objective
Presently, it is possible to cause the `text_input` example to panic by
pressing enter too quickly. This happens because, under these
circumstances, the `listen_keyboard_input_events` system spawns multiple
text entry entities where the `listen_received_character_events` system
expects there to only ever be one. As this is an example this PR aims to
highlight this risk and mitigate it.
## Solution
Modify the example so that if a text entry has been spawned already
during this run of the system then further Enter input events are
ignored this run.
# Objective
Bevy's animation system currently does tree traversals based on `Name`
that aren't necessary. Not only do they require in unsafe code because
tree traversals are awkward with parallelism, but they are also somewhat
slow, brittle, and complex, which manifested itself as way too many
queries in #11670.
# Solution
Divide animation into two phases: animation *advancement* and animation
*evaluation*, which run after one another. *Advancement* operates on the
`AnimationPlayer` and sets the current animation time to match the game
time. *Evaluation* operates on all animation bones in the scene in
parallel and sets the transforms and/or morph weights based on the time
and the clip.
To do this, we introduce a new component, `AnimationTarget`, which the
asset loader places on every bone. It contains the ID of the entity
containing the `AnimationPlayer`, as well as a UUID that identifies
which bone in the animation the target corresponds to. In the case of
glTF, the UUID is derived from the full path name to the bone. The rule
that `AnimationTarget`s are descendants of the entity containing
`AnimationPlayer` is now just a convention, not a requirement; this
allows us to eliminate the unsafe code.
# Migration guide
* `AnimationClip` now uses UUIDs instead of hierarchical paths based on
the `Name` component to refer to bones. This has several consequences:
- A new component, `AnimationTarget`, should be placed on each bone that
you wish to animate, in order to specify its UUID and the associated
`AnimationPlayer`. The glTF loader automatically creates these
components as necessary, so most uses of glTF rigs shouldn't need to
change.
- Moving a bone around the tree, or renaming it, no longer prevents an
`AnimationPlayer` from affecting it.
- Dynamically changing the `AnimationPlayer` component will likely
require manual updating of the `AnimationTarget` components.
* Entities with `AnimationPlayer` components may now possess descendants
that also have `AnimationPlayer` components. They may not, however,
animate the same bones.
* As they aren't specific to `TypeId`s,
`bevy_reflect::utility::NoOpTypeIdHash` and
`bevy_reflect::utility::NoOpTypeIdHasher` have been renamed to
`bevy_reflect::utility::NoOpHash` and
`bevy_reflect::utility::NoOpHasher` respectively.
# Objective
- The `transform.translation` of a `TextBundle` in this example is
unnecessarily set to the same constant position over and over in each
`Update`. Newbies might be confused as to why this translation is being
performed over and over.
## Solution
- perform the translation only once, when the `Text2dBundle` is
instantiated
# Objective
- `#[reflect(FromWorld)]` was added to `ComponentB` somewhere between
`v0.12.1` and `v0.13.0`, but it is unnecessary
## Solution
- remove the unnecessary `FromWorld`
# Objective
- revert a single-line change made to `examples/asset/asset_loading`
example between `v0.12.1` release and `v0.13.0` release which resulted
in a too-bright, washed-out rendering
## Solution
- reverted the changes made to this example between `v0.12.1` and
`v0.13.0`
# Objective
Fixes two small quality issues:
1. With the new default ev100 exposure value, the irradiance intensity
was too low
2. The camera was rotating at a fixed speed (instead of a speed
multiplied by delta time), resulting in frame-rate dependent rotation
speed.
# Objective
Fixes#11846
## Solution
Add a `synchronous_pipeline_compilation ` field to `RenderPlugin`,
defaulting to `false`.
Most of the diff is whitespace.
## Changelog
Added `synchronous_pipeline_compilation ` to `RenderPlugin` for
disabling async pipeline creation.
## Migration Guide
TODO: consider combining this with the guide for #11846
`RenderPlugin` has a new `synchronous_pipeline_compilation ` property.
The default value is `false`. Set this to `true` if you want to retain
the previous synchronous behavior.
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
#10644 introduced nice "statically typed" labels that replace the old
strings. I would like to propose some changes to the names introduced:
* `SubGraph2d` -> `Core2d` and `SubGraph3d` -> `Core3d`. The names of
these graphs have been / should continue to be the "core 2d" graph not
the "sub graph 2d" graph. The crate is called `bevy_core_pipeline`, the
modules are still `core_2d` and `core_3d`, etc.
* `Labels2d` and `Labels3d`, at the very least, should not be plural to
follow naming conventions. A Label enum is not a "collection of labels",
it is a _specific_ Label. However I think `Label2d` and `Label3d` is
significantly less clear than `Node2d` and `Node3d`, so I propose those
changes here. I've done the same for `LabelsPbr` -> `NodePbr` and
`LabelsUi` -> `NodeUi`
Additionally, #10644 accidentally made one of the Camera2dBundle
constructors use the 3D graph instead of the 2D graph. I've fixed that
here.
---
## Changelog
* Renamed `SubGraph2d` -> `Core2d`, `SubGraph3d` -> `Core3d`, `Labels2d`
-> `Node2d`, `Labels3d` -> `Node3d`, `LabelsUi` -> `NodeUi`, `LabelsPbr`
-> `NodePbr`
# Objective
After adding configurable exposure, we set the default ev100 value to
`7` (indoor). This brought us out of sync with Blender's configuration
and defaults. This PR changes the default to `9.7` (bright indoor or
very overcast outdoors), as I calibrated in #11577. This feels like a
very reasonable default.
The other changes generally center around tweaking Bevy's lighting
defaults and examples to play nicely with this number, alongside a few
other tweaks and improvements.
Note that for artistic reasons I have reverted some examples, which
changed to directional lights in #11581, back to point lights.
Fixes#11577
---
## Changelog
- Changed `Exposure::ev100` from `7` to `9.7` to better match Blender
- Renamed `ExposureSettings` to `Exposure`
- `Camera3dBundle` now includes `Exposure` for discoverability
- Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the
middle-to-top of those ranges instead of near the bottom
- Added new `AMBIENT_DAYLIGHT` constant and set that as the new
`DirectionalLight` default illuminance.
- `PointLight` and `SpotLight` now have a default `intensity` of
1,000,000 lumens. This makes them actually useful in the context of the
new "semi-outdoor" exposure and puts them in the "cinema lighting"
category instead of the "common household light" category. They are also
reasonably close to the Blender default.
- `AmbientLight` default has been bumped from `20` to `80`.
## Migration Guide
- The increased `Exposure::ev100` means that all existing 3D lighting
will need to be adjusted to match (DirectionalLights, PointLights,
SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust
the `Exposure::ev100` on your cameras to work nicely with your current
lighting values. If you are currently relying on default intensity
values, you might need to change the intensity to achieve the same
effect. Note that in Bevy 0.12, point/spot lights had a different hard
coded ev100 value than directional lights. In Bevy 0.13, they use the
same ev100, so if you have both in your scene, the _scale_ between these
light types has changed and you will likely need to adjust one or both
of them.
# Objective
We recently got some neat new 2d shapes and the shapes are no longer
centered on the screen.
The hardcoded positions and colors are a pain to deal with when a new
shape is added.
## Solution
Delete a bunch of code and position shapes evenly. Assign colors evenly
too.
## Before
<img width="1280" alt="Screenshot 2024-02-14 at 3 17 40 PM"
src="https://github.com/bevyengine/bevy/assets/200550/cc9fd9a8-4019-4907-a50e-621cb656c20a">
## After
<img width="1280" alt="Screenshot 2024-02-14 at 3 17 24 PM"
src="https://github.com/bevyengine/bevy/assets/200550/033a3f91-d3bc-4ec8-af59-42a221f8b8e7">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Fix https://github.com/bevyengine/bevy/issues/11577.
## Solution
Fix the examples, add a few constants to make setting light values
easier, and change the default lighting settings to be more realistic.
(Now designed for an overcast day instead of an indoor environment)
---
I did not include any example-related changes in here.
## Changelogs (not including breaking changes)
### bevy_pbr
- Added `light_consts` module (included in prelude), which contains
common lux and lumen values for lights.
- Added `AmbientLight::NONE` constant, which is an ambient light with a
brightness of 0.
- Added non-EV100 variants for `ExposureSettings`'s EV100 constants,
which allow easier construction of an `ExposureSettings` from a EV100
constant.
## Breaking changes
### bevy_pbr
The several default lighting values were changed:
- `PointLight`'s default `intensity` is now `2000.0`
- `SpotLight`'s default `intensity` is now `2000.0`
- `DirectionalLight`'s default `illuminance` is now
`light_consts::lux::OVERCAST_DAY` (`1000.`)
- `AmbientLight`'s default `brightness` is now `20.0`
I just implemented this to record a video for the new blog post, but I
figured it would also make a good dedicated example. This also allows us
to remove a lot of code from the 2d/3d gizmo examples since it
supersedes this portion of code.
Depends on: https://github.com/bevyengine/bevy/pull/11699
Make the renamings/changes regarding texture atlases a bit less
confusing by calling `TextureAtlasLayout` a layout, not a texture atlas.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
This fixes a `FIXME` in `extract_meshes` and results in a performance
improvement.
As a result of this change, meshes in the render world might not be
attached to entities anymore. Therefore, the `entity` parameter to
`RenderCommand::render()` is now wrapped in an `Option`. Most
applications that use the render app's ECS can simply unwrap the
`Option`.
Note that for now sprites, gizmos, and UI elements still use the render
world as usual.
## Migration guide
* For efficiency reasons, some meshes in the render world may not have
corresponding `Entity` IDs anymore. As a result, the `entity` parameter
to `RenderCommand::render()` is now wrapped in an `Option`. Custom
rendering code may need to be updated to handle the case in which no
`Entity` exists for an object that is to be rendered.
> Follow up to #11600 and #10588
@mockersf expressed some [valid
concerns](https://github.com/bevyengine/bevy/pull/11600#issuecomment-1932796498)
about the current system this PR attempts to fix:
The `ComputedTextureSlices` reacts to asset change in both `bevy_sprite`
and `bevy_ui`, meaning that if the `ImageScaleMode` is inserted by
default in the bundles, we will iterate through most 2d items every time
an asset is updated.
# Solution
- `ImageScaleMode` only has two variants: `Sliced` and `Tiled`. I
removed the `Stretched` default
- `ImageScaleMode` is no longer part of any bundle, but the relevant
bundles explain that this additional component can be inserted
This way, the *absence* of `ImageScaleMode` means the image will be
stretched, and its *presence* will include the entity to the various
slicing systems
Optional components in bundles would make this more straigthfoward
# Additional work
Should I add new bundles with the `ImageScaleMode` component ?
# Objective
#11431 and #11688 implemented meshing support for Bevy's new geometric
primitives. The next step is to deprecate the shapes in
`bevy_render::mesh::shape` and to later remove them completely for 0.14.
## Solution
Deprecate the shapes and reduce code duplication by utilizing the
primitive meshing API for the old shapes where possible.
Note that some shapes have behavior that can't be exactly reproduced
with the new primitives yet:
- `Box` is more of an AABB with min/max extents
- `Plane` supports a subdivision count
- `Quad` has a `flipped` property
These types have not been changed to utilize the new primitives yet.
---
## Changelog
- Deprecated all shapes in `bevy_render::mesh::shape`
- Changed all examples to use new primitives for meshing
## Migration Guide
Bevy has previously used rendering-specific types like `UVSphere` and
`Quad` for primitive mesh shapes. These have now been deprecated to use
the geometric primitives newly introduced in version 0.13.
Some examples:
```rust
let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0));
let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0));
let before = meshes.add(shape::Quad::default());
let after = meshes.add(Rectangle::default());
let before = meshes.add(shape::Plane::from_size(5.0));
// The surface normal can now also be specified when using `new`
let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0));
let before = meshes.add(
Mesh::try_from(shape::Icosphere {
radius: 0.5,
subdivisions: 5,
})
.unwrap(),
);
let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap());
```
> Follow up to #10588
> Closes#11749 (Supersedes #11756)
Enable Texture slicing for the following UI nodes:
- `ImageBundle`
- `ButtonBundle`
<img width="739" alt="Screenshot 2024-01-29 at 13 57 43"
src="https://github.com/bevyengine/bevy/assets/26703856/37675681-74eb-4689-ab42-024310cf3134">
I also added a collection of `fantazy-ui-borders` from
[Kenney's](www.kenney.nl) assets, with the appropriate license (CC).
If it's a problem I can use the same textures as the `sprite_slice`
example
# Work done
Added the `ImageScaleMode` component to the targetted bundles, most of
the logic is directly reused from `bevy_sprite`.
The only additional internal component is the UI specific
`ComputedSlices`, which does the same thing as its spritee equivalent
but adapted to UI code.
Again the slicing is not compatible with `TextureAtlas`, it's something
I need to tackle more deeply in the future
# Fixes
* [x] I noticed that `TextureSlicer::compute_slices` could infinitely
loop if the border was larger that the image half extents, now an error
is triggered and the texture will fallback to being stretched
* [x] I noticed that when using small textures with very small *tiling*
options we could generate hundred of thousands of slices. Now I set a
minimum size of 1 pixel per slice, which is already ridiculously small,
and a warning will be sent at runtime when slice count goes above 1000
* [x] Sprite slicing with `flip_x` or `flip_y` would give incorrect
results, correct flipping is now supported to both sprites and ui image
nodes thanks to @odecay observation
# GPU Alternative
I create a separate branch attempting to implementing 9 slicing and
tiling directly through the `ui.wgsl` fragment shader. It works but
requires sending more data to the GPU:
- slice border
- tiling factors
And more importantly, the actual quad *scale* which is hard to put in
the shader with the current code, so that would be for a later iteration
# Objective
- Fixes#11740
## Solution
- Turned `Mesh::set_indices` into `Mesh::insert_indices` and added
related methods for completeness.
---
## Changelog
- Replaced `Mesh::set_indices(indices: Option<Indices>)` with
`Mesh::insert_indices(indices: Indices)`
- Replaced `Mesh::with_indices(indices: Option<Indices>)` with
`Mesh::with_inserted_indices(indices: Indices)` and
`Mesh::with_removed_indices()` mirroring the API for inserting /
removing attributes.
- Updated the examples and internal uses of the APIs described above.
## Migration Guide
- Use `Mesh::insert_indices` or `Mesh::with_inserted_indices` instead of
`Mesh::set_indices` / `Mesh::with_indices`.
- If you have passed `None` to `Mesh::set_indices` or
`Mesh::with_indices` you should use `Mesh::remove_indices` or
`Mesh::with_removed_indices` instead.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Bevy could benefit from *irradiance volumes*, also known as *voxel
global illumination* or simply as light probes (though this term is not
preferred, as multiple techniques can be called light probes).
Irradiance volumes are a form of baked global illumination; they work by
sampling the light at the centers of each voxel within a cuboid. At
runtime, the voxels surrounding the fragment center are sampled and
interpolated to produce indirect diffuse illumination.
## Solution
This is divided into two sections. The first is copied and pasted from
the irradiance volume module documentation and describes the technique.
The second part consists of notes on the implementation.
### Overview
An *irradiance volume* is a cuboid voxel region consisting of
regularly-spaced precomputed samples of diffuse indirect light. They're
ideal if you have a dynamic object such as a character that can move
about
static non-moving geometry such as a level in a game, and you want that
dynamic object to be affected by the light bouncing off that static
geometry.
To use irradiance volumes, you need to precompute, or *bake*, the
indirect
light in your scene. Bevy doesn't currently come with a way to do this.
Fortunately, [Blender] provides a [baking tool] as part of the Eevee
renderer, and its irradiance volumes are compatible with those used by
Bevy.
The [`bevy-baked-gi`] project provides a tool, `export-blender-gi`, that
can
extract the baked irradiance volumes from the Blender `.blend` file and
package them up into a `.ktx2` texture for use by the engine. See the
documentation in the `bevy-baked-gi` project for more details as to this
workflow.
Like all light probes in Bevy, irradiance volumes are 1×1×1 cubes that
can
be arbitrarily scaled, rotated, and positioned in a scene with the
[`bevy_transform::components::Transform`] component. The 3D voxel grid
will
be stretched to fill the interior of the cube, and the illumination from
the
irradiance volume will apply to all fragments within that bounding
region.
Bevy's irradiance volumes are based on Valve's [*ambient cubes*] as used
in
*Half-Life 2* ([Mitchell 2006], slide 27). These encode a single color
of
light from the six 3D cardinal directions and blend the sides together
according to the surface normal.
The primary reason for choosing ambient cubes is to match Blender, so
that
its Eevee renderer can be used for baking. However, they also have some
advantages over the common second-order spherical harmonics approach:
ambient cubes don't suffer from ringing artifacts, they are smaller (6
colors for ambient cubes as opposed to 9 for spherical harmonics), and
evaluation is faster. A smaller basis allows for a denser grid of voxels
with the same storage requirements.
If you wish to use a tool other than `export-blender-gi` to produce the
irradiance volumes, you'll need to pack the irradiance volumes in the
following format. The irradiance volume of resolution *(Rx, Ry, Rz)* is
expected to be a 3D texture of dimensions *(Rx, 2Ry, 3Rz)*. The
unnormalized
texture coordinate *(s, t, p)* of the voxel at coordinate *(x, y, z)*
with
side *S* ∈ *{-X, +X, -Y, +Y, -Z, +Z}* is as follows:
```text
s = x
t = y + ⎰ 0 if S ∈ {-X, -Y, -Z}
⎱ Ry if S ∈ {+X, +Y, +Z}
⎧ 0 if S ∈ {-X, +X}
p = z + ⎨ Rz if S ∈ {-Y, +Y}
⎩ 2Rz if S ∈ {-Z, +Z}
```
Visually, in a left-handed coordinate system with Y up, viewed from the
right, the 3D texture looks like a stacked series of voxel grids, one
for
each cube side, in this order:
| **+X** | **+Y** | **+Z** |
| ------ | ------ | ------ |
| **-X** | **-Y** | **-Z** |
A terminology note: Other engines may refer to irradiance volumes as
*voxel
global illumination*, *VXGI*, or simply as *light probes*. Sometimes
*light
probe* refers to what Bevy calls a reflection probe. In Bevy, *light
probe*
is a generic term that encompasses all cuboid bounding regions that
capture
indirect illumination, whether based on voxels or not.
Note that, if binding arrays aren't supported (e.g. on WebGPU or WebGL
2),
then only the closest irradiance volume to the view will be taken into
account during rendering.
[*ambient cubes*]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Mitchell 2006]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Blender]: http://blender.org/
[baking tool]:
https://docs.blender.org/manual/en/latest/render/eevee/render_settings/indirect_lighting.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
### Implementation notes
This patch generalizes light probes so as to reuse as much code as
possible between irradiance volumes and the existing reflection probes.
This approach was chosen because both techniques share numerous
similarities:
1. Both irradiance volumes and reflection probes are cuboid bounding
regions.
2. Both are responsible for providing baked indirect light.
3. Both techniques involve presenting a variable number of textures to
the shader from which indirect light is sampled. (In the current
implementation, this uses binding arrays.)
4. Both irradiance volumes and reflection probes require gathering and
sorting probes by distance on CPU.
5. Both techniques require the GPU to search through a list of bounding
regions.
6. Both will eventually want to have falloff so that we can smoothly
blend as objects enter and exit the probes' influence ranges. (This is
not implemented yet to keep this patch relatively small and reviewable.)
To do this, we generalize most of the methods in the reflection probes
patch #11366 to be generic over a trait, `LightProbeComponent`. This
trait is implemented by both `EnvironmentMapLight` (for reflection
probes) and `IrradianceVolume` (for irradiance volumes). Using a trait
will allow us to add more types of light probes in the future. In
particular, I highly suspect we will want real-time reflection planes
for mirrors in the future, which can be easily slotted into this
framework.
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
### Added
* A new `IrradianceVolume` asset type is available for baked voxelized
light probes. You can bake the global illumination using Blender or
another tool of your choice and use it in Bevy to apply indirect
illumination to dynamic objects.
# Objective
Split up from #11007, fixing most of the remaining work for #10569.
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`. This covers all shapes that Bevy has mesh
structs for in `bevy_render::mesh::shapes`.
`Cone` and `ConicalFrustum` are new shapes, so I can add them in a
follow-up, or I could just add them here directly if that's preferrable.
## Solution
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`.
The logic is mostly just a copy of the the existing `bevy_render`
shapes, but `Plane3d` has a configurable surface normal that affects the
orientation. Some property names have also been changed to be more
consistent.
The default values differ from the old shapes to make them a bit more
logical:
- Spheres now have a radius of 0.5 instead of 1.0. The default capsule
is equivalent to the default cylinder with the sphere's halves glued on.
- The inner and outer radius of the torus are now 0.5 and 1.0 instead of
0.5 and 1.5 (i.e. the new minor and major radii are 0.25 and 0.75). It's
double the width of the default cuboid, half of its height, and the
default sphere matches the size of the hole.
- `Cuboid` is 1x1x1 by default unlike the dreaded `Box` which is 2x1x1.
Before, with "old" shapes:
Now, with primitive meshing:
I only changed the `3d_shapes` example to use primitives for now. I can
change them all in this PR or a follow-up though, whichever way is
preferrable.
### Sphere API
Spheres have had separate `Icosphere` and `UVSphere` structs, but with
primitives we only have one `Sphere`.
We need to handle this with builders:
```rust
// Existing structs
let ico = Mesh::try_from(Icophere::default()).unwrap();
let uv = Mesh::from(UVSphere::default());
// Primitives
let ico = Sphere::default().mesh().ico(5).unwrap();
let uv = Sphere::default().mesh().uv(32, 18);
```
We could add methods on `Sphere` directly to skip calling `.mesh()`.
I also added a `SphereKind` enum that can be used with the `kind`
method:
```rust
let ico = Sphere::default()
.mesh()
.kind(SphereKind::Ico { subdivisions: 8 })
.build();
```
The default mesh for a `Sphere` is an icosphere with 5 subdivisions
(like the default `Icosphere`).
---
## Changelog
- Implement `Meshable` and `Default` for `Cuboid`, `Sphere`, `Cylinder`,
`Capsule`, `Torus`, and `Plane3d`
- Use primitives in `3d_shapes` example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes #4188, make users could set application ID for bevy apps.
## Solution
- Add `name` field to `bevy:🪟:Window`. Specifying this field adds
different properties to the window: application ID on `Wayland`,
`WM_CLASS` on `X11`, or window class name on Windows. It has no effect
on other platforms.
---
## Changelog
### Added
- Add `name` to `bevy:🪟:Window`.
## Migration Guide
- Set the `bevy_window::Window`'s `name` field when needed:
```rust
App::new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
title: "I am a window!".into(),
name: Some("SpaceGameCompany.SpaceShooter".into()),
..default()
}),
..default()
}))
.run();
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- (Partially) Fixes#9904
- Acts on #9910
## Solution
- Deprecated the relevant methods from `Query`, cascading changes as
required across Bevy.
---
## Changelog
- Deprecated `QueryState::get_component_unchecked_mut` method
- Deprecated `Query::get_component` method
- Deprecated `Query::get_component_mut` method
- Deprecated `Query::component` method
- Deprecated `Query::component_mut` method
- Deprecated `Query::get_component_unchecked_mut` method
## Migration Guide
### `QueryState::get_component_unchecked_mut`
Use `QueryState::get_unchecked_manual` and select for the exact
component based on the structure of the exact query as required.
### `Query::(get_)component(_unchecked)(_mut)`
Use `Query::get` and select for the exact component based on the
structure of the exact query as required.
- For mutable access (`_mut`), use `Query::get_mut`
- For unchecked access (`_unchecked`), use `Query::get_unchecked`
- For panic variants (non-`get_`), add `.unwrap()`
## Notes
- `QueryComponentError` can be removed once these deprecated methods are
also removed. Due to an interaction with `thiserror`'s derive macro, it
is not marked as deprecated.
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- Create an example for bounding volumes and intersection tests
## Solution
- Add an example with a few bounding volumes, created from primitives
- Allow the user to cycle trough the different intersection tests
# Objective
Add interactive system debugging capabilities to bevy, providing
step/break/continue style capabilities to running system schedules.
* Original implementation: #8063
- `ignore_stepping()` everywhere was too much complexity
* Schedule-config & Resource discussion: #8168
- Decided on selective adding of Schedules & Resource-based control
## Solution
Created `Stepping` Resource. This resource can be used to enable
stepping on a per-schedule basis. Systems within schedules can be
individually configured to:
* AlwaysRun: Ignore any stepping state and run every frame
* NeverRun: Never run while stepping is enabled
- this allows for disabling of systems while debugging
* Break: If we're running the full frame, stop before this system is run
Stepping provides two modes of execution that reflect traditional
debuggers:
* Step-based: Only execute one system at a time
* Continue/Break: Run all systems, but stop before running a system
marked as Break
### Demo
https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov
Breakout has been modified to use Stepping. The game runs normally for a
couple of seconds, then stepping is enabled and the game appears to
pause. A list of Schedules & Systems appears with a cursor at the first
System in the list. The demo then steps forward full frames using the
spacebar until the ball is about to hit a brick. Then we step system by
system as the ball impacts a brick, showing the cursor moving through
the individual systems. Finally the demo switches back to frame stepping
as the ball changes course.
### Limitations
Due to architectural constraints in bevy, there are some cases systems
stepping will not function as a user would expect.
#### Event-driven systems
Stepping does not support systems that are driven by `Event`s as events
are flushed after 1-2 frames. Although game systems are not running
while stepping, ignored systems are still running every frame, so events
will be flushed.
This presents to the user as stepping the event-driven system never
executes the system. It does execute, but the events have already been
flushed.
This can be resolved by changing event handling to use a buffer for
events, and only dropping an event once all readers have read it.
The work-around to allow these systems to properly execute during
stepping is to have them ignore stepping:
`app.add_systems(event_driven_system.ignore_stepping())`. This was done
in the breakout example to ensure sound played even while stepping.
#### Conditional Systems
When a system is stepped, it is given an opportunity to run. If the
conditions of the system say it should not run, it will not.
Similar to Event-driven systems, if a system is conditional, and that
condition is only true for a very small time window, then stepping the
system may not execute the system. This includes depending on any sort
of external clock.
This exhibits to the user as the system not always running when it is
stepped.
A solution to this limitation is to ensure any conditions are consistent
while stepping is enabled. For example, all systems that modify any
state the condition uses should also enable stepping.
#### State-transition Systems
Stepping is configured on the per-`Schedule` level, requiring the user
to have a `ScheduleLabel`.
To support state-transition systems, bevy generates needed schedules
dynamically. Currently it’s very difficult (if not impossible, I haven’t
verified) for the user to get the labels for these schedules.
Without ready access to the dynamically generated schedules, and a
resolution for the `Event` lifetime, **stepping of the state-transition
systems is not supported**
---
## Changelog
- `Schedule::run()` updated to consult `Stepping` Resource to determine
which Systems to run each frame
- Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting
`Schedule::set_label()` and `Schedule::label()` methods
- `Stepping` needed to know which `Schedule` was running, and prior to
this PR, `Schedule` didn't track its own label
- Would have preferred to add `Schedule::with_label()` and remove
`Schedule::new()`, but this PR touches enough already
- Added calls to `Schedule.set_label()` to `App` and `World` as needed
- Added `Stepping` resource
- Added `Stepping::begin_frame()` system to `MainSchedulePlugin`
- Run before `Main::run_main()`
- Notifies any `Stepping` Resource a new render frame is starting
## Migration Guide
- Add a call to `Schedule::set_label()` for any custom `Schedule`
- This is only required if the `Schedule` will be stepped
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
The PR is in a reviewable state now in the sense that the basic
implementations are there. There are still some ToDos that I'm aware of:
- [x] docs for all the new structs and traits
- [x] implement `Default` and derive other useful traits for the new
structs
- [x] Take a look at the notes again (Do this after a first round of
reviews)
- [x] Take care of the repetition in the circle drawing functions
---
# Objective
- TLDR: This PR enables us to quickly draw all the newly added
primitives from `bevy_math` in immediate mode with gizmos
- Addresses #10571
## Solution
- This implements the first design idea I had that covered everything
that was mentioned in the Issue
https://github.com/bevyengine/bevy/issues/10571#issuecomment-1863646197
---
## Caveats
- I added the `Primitive(2/3)d` impls for `Direction(2/3)d` to make them
work with the current solution. We could impose less strict requirements
for the gizmoable objects and remove the impls afterwards if the
community doesn't like the current approach.
---
## Changelog
- implement capabilities to draw ellipses on the gizmo in general (this
was required to have some code which is able to draw the ellipse
primitive)
- refactored circle drawing code to use the more general ellipse drawing
code to keep code duplication low
- implement `Primitive2d` for `Direction2d` and impl `Primitive3d` for
`Direction3d`
- implement trait to draw primitives with specialized details with
gizmos
- `GizmoPrimitive2d` for all the 2D primitives
- `GizmoPrimitive3d` for all the 3D primitives
- (question while writing this: Does it actually matter if we split this
in 2D and 3D? I guess it could be useful in the future if we do
something based on the main rendering mode even though atm it's kinda
useless)
---
---------
Co-authored-by: nothendev <borodinov.ilya@gmail.com>
# Objective
Drawing a `Gizmos::circle` whose normal is derived from a Transform's
local axes now requires converting a Vec3 to a Direction3d and
unwrapping the result, and I think we shold move the conversion into
Bevy.
## Solution
We can make
`Transform::{left,right,up,down,forward,back,local_x,local_y,local_z}`
return a Direction3d, because they know that their results will be of
finite non-zero length (roughly 1.0).
---
## Changelog
`Transform::up()` and similar functions now return `Direction3d` instead
of `Vec3`.
## Migration Guide
Callers of `Transform::up()` and similar functions may have to
dereference the returned `Direction3d` to get to the inner `Vec3`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- `AssetTransformer` provides an input asset, and output an asset, but
provides no access to the `LabeledAsset`'s created by the `AssetLoader`.
Labeled sub assets are an extremely important piece of many assets, Gltf
in particular, and without them the amount of transformation on an asset
is limited. In order for `AssetTransformer`'s to be useful, they need to
have access to these sub assets.
- LabeledAsset's loaded by `AssetLoader`s are provided to `AssetSaver`s
in the `LoadAndSave` process, but the `LoadTransformAndSave` process
drops these values in the transform stage, and so `AssetSaver` is given
none.
- Fixes#11606
Ideally the AssetTransformer should not ignore labeled sub assets, and
they should be kept at least for the AssetSaver
## Solution
- I created a new struct similar to `SavedAsset` named
`TransformedAsset` which holds the input asset, and the HashMap of
`LabeledAsset`s. The transform function now takes as input a
`TransformedAsset`, and returns a `TransformedAsset::<AssetOutput>`.
This gives the transform function access to the labeled sub assets
created by the `AssetLoader`.
- I also created `TransformedSubAsset` which holds mutable references to
a sub asset and that sub assets HashMap of `LabeledAsset`s. This allows
you to travers the Tree of `LabeledAsset`s by reference relatively
easily.
- The `LoadTransformAndSave` processor was then reworked to use the new
structs, stopping the `LabeledAsset`s from being dropped.
---
## Changelog
- Created TransformedAsset struct and TransformedSubAsset struct.
- Changed `get_untyped_handle` to return a `UntypedHandle` directly
rather than a reference and added `get_handle` as a typed variant in
SavedAsset and TransformedAsset
- Added `SavedAsset::from_transformed` as a constructor from a
`TransformedAsset`
- Switched LoadTransformAndSave process code to work with new
`TransformedAsset` type
- Added a `ProcessError` for `AssetTransformer` in process.rs
- Switched `AssetTransformer::transform` to use `TransformedAsset` as
input and output.
- Switched `AssetTransformer` to use a `BoxedFuture` like `AssetLoader`
and `AssetSaver` to allow for async transformation code.
- Updated AssetTransformer example to use new structure.
# Objective
- When running any of the stress tests, the refresh rate is currently
capped to 60hz because of the `ReactiveLowPower` default used when the
window is not in focus. Since stress tests should run as fast as
possible (and as such vsync is disabled for all of them), it makes sense
to always run them in `Continuous` mode. This is especially useful to
avoid capturing non-representative frame times when recording a Tracy
frame.
## Solution
- Always use the `Continuous` update mode in stress tests.
# Objective
- Finish PR #10322
## Solution
- Rebase changes in PR #10322 and format the changes.
Co-authored-by: Mauer-Oats <maueroats@users.noreply.github.com>
# Objective
- Addresses **Support processing and loading files without extensions**
from #9714
- Addresses **More runtime loading configuration** from #9714
- Fixes#367
- Fixes#10703
## Solution
`AssetServer::load::<A>` and `AssetServer::load_with_settings::<A>` can
now use the `Asset` type parameter `A` to select a registered
`AssetLoader` without inspecting the provided `AssetPath`. This change
cascades onto `LoadContext::load` and `LoadContext::load_with_settings`.
This allows the loading of assets which have incorrect or ambiguous file
extensions.
```rust
// Allow the type to be inferred by context
let handle = asset_server.load("data/asset_no_extension");
// Hint the type through the handle
let handle: Handle<CustomAsset> = asset_server.load("data/asset_no_extension");
// Explicit through turbofish
let handle = asset_server.load::<CustomAsset>("data/asset_no_extension");
```
Since a single `AssetPath` no longer maps 1:1 with an `Asset`, I've also
modified how assets are loaded to permit multiple asset types to be
loaded from a single path. This allows for two different `AssetLoaders`
(which return different types of assets) to both load a single path (if
requested).
```rust
// Uses GltfLoader
let model = asset_server.load::<Gltf>("cube.gltf");
// Hypothetical Blob loader for data transmission (for example)
let blob = asset_server.load::<Blob>("cube.gltf");
```
As these changes are reflected in the `LoadContext` as well as the
`AssetServer`, custom `AssetLoaders` can also take advantage of this
behaviour to create more complex assets.
---
## Change Log
- Updated `custom_asset` example to demonstrate extension-less assets.
- Added `AssetServer::get_handles_untyped` and Added
`AssetServer::get_path_ids`
## Notes
As a part of that refactor, I chose to store `AssetLoader`s (within
`AssetLoaders`) using a `HashMap<TypeId, ...>` instead of a `Vec<...>`.
My reasoning for this was I needed to add a relationship between `Asset`
`TypeId`s and the `AssetLoader`, so instead of having a `Vec` and a
`HashMap`, I combined the two, removing the `usize` index from the
adjacent maps.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The whole `Cow<'static, str>` naming for nodes and subgraphs in
`RenderGraph` is a mess.
## Solution
Replaces hardcoded and potentially overlapping strings for nodes and
subgraphs inside `RenderGraph` with bevy's labelsystem.
---
## Changelog
* Two new labels: `RenderLabel` and `RenderSubGraph`.
* Replaced all uses for hardcoded strings with those labels
* Moved `Taa` label from its own mod to all the other `Labels3d`
* `add_render_graph_edges` now needs a tuple of labels
* Moved `ScreenSpaceAmbientOcclusion` label from its own mod with the
`ShadowPass` label to `LabelsPbr`
* Removed `NodeId`
* Renamed `Edges.id()` to `Edges.label()`
* Removed `NodeLabel`
* Changed examples according to the new label system
* Introduced new `RenderLabel`s: `Labels2d`, `Labels3d`, `LabelsPbr`,
`LabelsUi`
* Introduced new `RenderSubGraph`s: `SubGraph2d`, `SubGraph3d`,
`SubGraphUi`
* Removed `Reflect` and `Default` derive from `CameraRenderGraph`
component struct
* Improved some error messages
## Migration Guide
For Nodes and SubGraphs, instead of using hardcoded strings, you now
pass labels, which can be derived with structs and enums.
```rs
// old
#[derive(Default)]
struct MyRenderNode;
impl MyRenderNode {
pub const NAME: &'static str = "my_render_node"
}
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
core_3d::graph::NAME,
MyRenderNode::NAME,
)
.add_render_graph_edges(
core_3d::graph::NAME,
&[
core_3d::graph::node::TONEMAPPING,
MyRenderNode::NAME,
core_3d::graph::node::END_MAIN_PASS_POST_PROCESSING,
],
);
// new
use bevy::core_pipeline::core_3d::graph::{Labels3d, SubGraph3d};
#[derive(Debug, Hash, PartialEq, Eq, Clone, RenderLabel)]
pub struct MyRenderLabel;
#[derive(Default)]
struct MyRenderNode;
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
SubGraph3d,
MyRenderLabel,
)
.add_render_graph_edges(
SubGraph3d,
(
Labels3d::Tonemapping,
MyRenderLabel,
Labels3d::EndMainPassPostProcessing,
),
);
```
### SubGraphs
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph2d` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph3d` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::NAME` | `graph::SubGraphUi` |
### Nodes
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels2d::MsaaWriteback` |
| `node::MAIN_PASS` | `Labels2d::MainPass` |
| `node::BLOOM` | `Labels2d::Bloom` |
| `node::TONEMAPPING` | `Labels2d::Tonemapping` |
| `node::FXAA` | `Labels2d::Fxaa` |
| `node::UPSCALING` | `Labels2d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels2d::ConstrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels2d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels3d::MsaaWriteback` |
| `node::PREPASS` | `Labels3d::Prepass` |
| `node::DEFERRED_PREPASS` | `Labels3d::DeferredPrepass` |
| `node::COPY_DEFERRED_LIGHTING_ID` | `Labels3d::CopyDeferredLightingId`
|
| `node::END_PREPASSES` | `Labels3d::EndPrepasses` |
| `node::START_MAIN_PASS` | `Labels3d::StartMainPass` |
| `node::MAIN_OPAQUE_PASS` | `Labels3d::MainOpaquePass` |
| `node::MAIN_TRANSMISSIVE_PASS` | `Labels3d::MainTransmissivePass` |
| `node::MAIN_TRANSPARENT_PASS` | `Labels3d::MainTransparentPass` |
| `node::END_MAIN_PASS` | `Labels3d::EndMainPass` |
| `node::BLOOM` | `Labels3d::Bloom` |
| `node::TONEMAPPING` | `Labels3d::Tonemapping` |
| `node::FXAA` | `Labels3d::Fxaa` |
| `node::UPSCALING` | `Labels3d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels3d::ContrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels3d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline`
| old string-based path | new label |
|-----------------------|-----------|
| `taa::draw_3d_graph::node::TAA` | `Labels3d::Taa` |
#### in `bevy_pbr`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_3d_graph::node::SHADOW_PASS` | `LabelsPbr::ShadowPass` |
| `ssao::draw_3d_graph::node::SCREEN_SPACE_AMBIENT_OCCLUSION` |
`LabelsPbr::ScreenSpaceAmbientOcclusion` |
| `deferred::DEFFERED_LIGHTING_PASS` | `LabelsPbr::DeferredLightingPass`
|
#### in `bevy_render`
| old string-based path | new label |
|-----------------------|-----------|
| `main_graph::node::CAMERA_DRIVER` | `graph::CameraDriverLabel` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::node::UI_PASS` | `graph::LabelsUi::UiPass` |
---
## Future work
* Make `NodeSlot`s also use types. Ideally, we have an enum with unit
variants where every variant resembles one slot. Then to make sure you
are using the right slot enum and make rust-analyzer play nicely with
it, we should make an associated type in the `Node` trait. With today's
system, we can introduce 3rd party slots to a node, and i wasnt sure if
this was used, so I didn't do this in this PR.
## Unresolved Questions
When looking at the `post_processing` example, we have a struct for the
label and a struct for the node, this seems like boilerplate and on
discord, @IceSentry (sowy for the ping)
[asked](https://discord.com/channels/691052431525675048/743663924229963868/1175197016947699742)
if a node could automatically introduce a label (or i completely
misunderstood that). The problem with that is, that nodes like
`EmptyNode` exist multiple times *inside the same* (sub)graph, so there
we need extern labels to distinguish between those. Hopefully we can
find a way to reduce boilerplate and still have everything unique. For
EmptyNode, we could maybe make a macro which implements an "empty node"
for a type, but for nodes which contain code and need to be present
multiple times, this could get nasty...
# Objective
- Example `send_and_receive_events` added in #11574 panics
```
thread 'Compute Task Pool (3)' panicked at bevy/crates/bevy_ecs/src/system/system_param.rs:570:17:
Resource requested by send_and_receive_events::read_and_write_different_event_types does not exist: bevy_ecs::event::Events<send_and_receive_events::A>
Encountered a panic in system `send_and_receive_events::read_and_write_different_event_types`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
```
## Solution
- Register the events used in the system
- Don't use logger as it's not setup with `MinimalPlugins`, just print
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
Fixes#11479
## Solution
- Remove `collide_aabb.rs`
- Re-implement the example-specific collision code in the example,
taking advantage of the new `IntersectsVolume` trait.
## Changelog
- Removed `sprite::collide_aabb::collide` and
`sprite::collide_aabb::Collision`.
## Migration Guide
`sprite::collide_aabb::collide` and `sprite::collide_aabb::Collision`
were removed.
```rust
// Before
let collision = bevy::sprite::collide_aabb::collide(a_pos, a_size, b_pos, b_size);
if collision.is_some() {
// ...
}
// After
let collision = Aabb2d::new(a_pos.truncate(), a_size / 2.)
.intersects(&Aabb2d::new(b_pos.truncate(), b_size / 2.));
if collision {
// ...
}
```
If you were making use `collide_aabb::Collision`, see the new
`collide_with_side` function in the [`breakout`
example](https://bevyengine.org/examples/Games/breakout/).
## Discussion
As discussed in the linked issue, maybe we want to wait on `bevy_sprite`
generally making use of `Aabb2b` so users don't need to construct it
manually. But since they **do** need to construct the bounding circle
for the ball manually, this doesn't seem like a big deal to me.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
- example `animated_material` is more complex that needed to show how to
animate materials
- it makes CI crash because it uses too much memory
## Solution
- Simplify the example
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
# Objective
Allow TextureAtlasBuilder in AssetLoader.
Fixes#2987
## Solution
- TextureAtlasBuilder no longer hold just AssetIds that are used to
retrieve the actual image data in `finish`, but &Image instead.
- TextureAtlasBuilder now required AssetId only optionally (and it is
only used to retrieve the index from the AssetId in TextureAtlasLayout),
## Issues
- The issue mentioned here
https://github.com/bevyengine/bevy/pull/11474#issuecomment-1904676937
now also extends to the actual atlas texture. In short: Calling
add_texture multiple times for the same texture will lead to duplicate
image data in the atlas texture and additional indices.
If you provide an AssetId we can probably do something to de-duplicate
the entries while keeping insertion order (suggestions welcome on how
exactly). But if you don't then we are out of luck (unless we can and
want to hash the image, which I do not think we want).
---
## Changelog
### Changed
- TextureAtlasBuilder `add_texture` can be called without providing an
AssetId
- TextureAtlasBuilder `finish` no longer takes Assets<Image> and no
longer returns a Handle<Image>
## Migration Guide
- For `add_texture` you need to wrap your AssetId in Some
- `finish` now returns the atlas texture image directly instead of a
handle. Provide the atlas texture to `add` on Assets<Texture> to get a
Handle<Image>
# Objective
Alternative to #11515.
Fixes change detection being triggered on the "image viewer image
material" every frame.
## Solution
- Split the megasystem into two separate systems: one to handle drop
events, and one to handle asset change events.
- Move the event reader iteration "outside." so that we're only doing
stuff when there are events.
- Flatten some of the more extreme nesting
- Other bits of cleanup, removing an unnecessary clone and unused
variable.
I think these systems can even run in parallel now, not that it
particularly matters.
# Objective
Plugins are an incredible tool for encapsulating functionality. They are
low-key one of Bevy's best features. Combined with rust's module and
privacy system, it's a match made in heaven.
The one downside is that they can be a little too verbose to define. 90%
of all plugin definitions look something like this:
```rust
pub struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
}
```
Every so often it gets a little spicier:
```rust
pub struct MyGenericPlugin<T>(PhantomData<T>);
impl<T> Default for MyGenericPlugin<T> {
fn default() -> Self { ... }
}
impl<T> Plugin for MyGenericPlugin<T> { ... }
```
This is an annoying amount of boilerplate. Ideally, plugins should be
focused and small in scope, which means any app is going to have a *lot*
of them. Writing a plugin should be as easy as possible, and the *only*
part of this process that carries any meaning is the body of `fn build`.
## Solution
Implement `Plugin` for functions that take `&mut App` as a parameter.
The two examples above now look like this:
```rust
pub fn my_plugin(app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
pub fn my_generic_plugin<T>(app: &mut App) {
// No need for PhantomData, it just works.
}
```
Almost all plugins can be written this way, which I believe will make
bevy code much more attractive. Less boilerplate and less meaningless
indentation. More plugins with smaller scopes.
---
## Changelog
The `Plugin` trait is now implemented for all functions that take `&mut
App` as their only parameter. This is an abbreviated way of defining
plugins with less boilerplate than manually implementing the trait.
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
One of a few Bevy Asset improvements I would like to make: #11216.
Currently asset processing and asset saving are handled by the same
trait, `AssetSaver`. This makes it difficult to reuse saving
implementations and impossible to have a single "universal" saver for a
given asset type.
## Solution
This PR splits off the processing portion of `AssetSaver` into
`AssetTransformer`, which is responsible for transforming assets. This
change involves adding the `LoadTransformAndSave` processor, which
utilizes the new API. The `LoadAndSave` still exists since it remains
useful in situations where no "transformation" of the asset is done,
such as when compressing assets.
## Notes:
As an aside, Bikeshedding is welcome on the names. I'm not entirely
convinced by `AssetTransformer`, which was chosen mostly because
`AssetProcessor` is taken. Additionally, `LoadTransformSave` may be
sufficient instead of `LoadTransformAndSave`.
---
## Changelog
### Added
- `AssetTransformer` which is responsible for transforming Assets.
- `LoadTransformAndSave`, a `Process` implementation.
### Changed
- Changed `AssetSaver`'s responsibilities from processing and saving to
just saving.
- Updated `asset_processing` example to use new API.
- Old asset .meta files regenerated with new processor.
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#11516
## Solution
- Add Animated Material example (colors are hue-cycling smoothly
per-mesh)
Note: this example reproduces the perf issue found in #10610 pretty
consistently, with and without the changes from that PR included. Frame
time is sometimes around 4.3ms, other times around 12-14ms. Its pretty
random per run. I think this clears #10610 for merge.
# Objective
Fixes#11411
## Solution
- Added a simple example how to create and configure custom schedules
that are run by the `Main` schedule.
- Spot checked some of the API docs used, fixed `App::add_schedule` docs
that referred to a function argument that was removed by #9600.
## Open Questions
- While spot checking the docs, I noticed that the `Schedule` label is
stored in a field called `name` instead of `label`. This seems
unintuitive since the term label is used everywhere else. Should we
change that field name? It was introduced in #9600. If so, I do think
this change would be out of scope for this PR that mainly adds the
example.
# Objective
Fixes#10414.
That issue and its comments do a great job of laying out the case for
this.
## Solution
Added an optional `spatial_scale` field to `PlaybackSettings`, which
overrides the default value set on `AudioPlugin`.
## Changelog
- `AudioPlugin::spatial_scale` has been renamed to
`default_spatial_scale`.
- `SpatialScale` is no longer a resource and is wrapped by
`DefaultSpatialScale`.
- Added an optional `spatial_scale` to `PlaybackSettings`.
## Migration Guide
`AudioPlugin::spatial_scale` has been renamed to `default_spatial_scale`
and the default spatial scale can now be overridden on individual audio
sources with `PlaybackSettings::spatial_scale`.
If you were modifying or reading `SpatialScale` at run time, use
`DefaultSpatialScale` instead.
```rust
// before
app.add_plugins(DefaultPlugins.set(AudioPlugin {
spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
// after
app.add_plugins(DefaultPlugins.set(AudioPlugin {
default_spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
```
# Objective
TypeUuid is deprecated, remove it.
## Migration Guide
Convert any uses of `#[derive(TypeUuid)]` with `#[derive(TypePath]` for
more complex uses see the relevant
[documentation](https://docs.rs/bevy/latest/bevy/prelude/trait.TypePath.html)
for more information.
---------
Co-authored-by: ebola <dev@axiomatic>
# Objective
Fixes#11503
## Solution
Use an empty set of args on the web.
## Discussion
Maybe in the future we could wrap this so that we can use query args on
the web or something, but this was the minimum changeset I could think
of to keep the functionality and make them not panic on the web.
# Objective
Since #10339, the contrast in this example has been very low. While I
was in there, I made a few other tweaks to the style.
Alternative to #10102.
## Solution
- Increase brightness of inactive buttons for higher contrast on the new
clear color
- Combine `DEAD_COLOR` and `EXTENT_COLOR`. These were using the same
value, and combining them might make the intent a little clearer. (This
is the single color for "not the live zone.")
- Make the "stick buttons" slightly smaller, so it's a bit more obvious
that they are sitting inside of the default dead zone.
- Remove explicit text color -- it was the same as the default
- Add top-left margin to the text in the top left, and change the font
size to better match other examples with text in the corner.
## Screenshots
<details>
<summary>With Bevy's default dead / live zones.</summary>
Before / After
</details>
<details>
<summary>With Bevy's old dead / live zones. (with the upper live zone
boundary != 1.0)</summary>
Before / After
</details>
# Objective
- Fix a memory leak in the dynamic ECS example mentioned in #11459
## Solution
- Rather than allocate the memory manually instead store a collection of
`Vec` that will be dropped after it is used.
---
I must have misinterpreted `OwningPtr`s semantics when initially writing
this example. I believe we should be able to provide better APIs here
for inserting dynamic components that don't require the user to wrangle
so much unsafety. We have no other examples using `insert_by_ids` and
our only tests show it being used for 1 or 2 values with nested calls to
`OwningPtr::make` despite the function taking an iterator. Rust's type
system is quite restrictive here but we could at least let
`OwningPtr::new` take non u8 `NonNull`.
I also agree with #11459 that we should generally be trying to simplify
and clarify this example.
# Objective
- Prep for https://github.com/bevyengine/bevy/pull/10164
- Make deferred_lighting_pass_id a ColorAttachment
- Correctly extract shadow view frusta so that the view uniforms get
populated
- Make some needed things public
- Misc formatting
# Objective
> Can anyone explain to me the reasoning of renaming all the types named
Query to Data. I'm talking about this PR
https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to
me that a bunch of types that are used to run queries aren't named Query
anymore. Like ViewQuery on the ViewNode is the type of the Query. I
don't really understand the point of the rename, it just seems like it
hides the fact that a query will run based on those types.
[@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387)
## Solution
Revert several renames in #10779.
## Changelog
- `ViewNode::ViewData` is now `ViewNode::ViewQuery` again.
## Migration Guide
- This PR amends the migration guide in
https://github.com/bevyengine/bevy/pull/10779
---------
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
- Add the ability to describe storage texture bindings when deriving
`AsBindGroup`.
- This is especially valuable for the compute story of bevy which
deserves some extra love imo.
## Solution
- This add the ability to annotate struct fields with a
`#[storage_texture(0)]` annotation.
- Instead of adding specific option parsing for all the image formats
and access modes, I simply accept a token stream and defer checking to
see if the option is valid to the compiler. This still results in useful
and friendly errors and is free to maintain and always compatible with
wgpu changes.
---
## Changelog
- The `#[storage_texture(..)]` annotation is now accepted for fields of
`Handle<Image>` in structs that derive `AsBindGroup`.
- The game_of_life compute shader example has been updated to use
`AsBindGroup` together with `[storage_texture(..)]` to obtain the
`BindGroupLayout`.
## Migration Guide
# Objective
Fix weird visuals when drawing a gizmo with a non-normed normal.
Fixes#11401
## Solution
Just normalize right before we draw. Could do it when constructing the
builder but that seems less consistent.
## Changelog
- gizmos.circle normal is now a Direction3d instead of a Vec3.
## Migration Guide
- Pass a Direction3d for gizmos.circle normal, eg.
`Direction3d::new(vec).unwrap_or(default)` or potentially
`Direction3d::new_unchecked(vec)` if you know your vec is definitely
normalized.
# Objective
Currently, the `primitives` module is inside of the prelude for
`bevy_math`, but the actual primitives are not. This requires either
importing the shapes everywhere that uses them, or adding the
`primitives::` prefix:
```rust
let rectangle = meshes.add(primitives::Rectangle::new(5.0, 2.5));
```
(Note: meshing isn't actually implemented yet, but it's in #11431)
The primitives are meant to be used for a variety of tasks across
several crates, like for meshing, bounding volumes, gizmos, colliders,
and so on, so I think having them in the prelude is justified. It would
make several common tasks a lot more ergonomic.
```rust
let rectangle = meshes.add(Rectangle::new(5.0, 2.5));
```
## Solution
Add `primitives::*` to `bevy_math::prelude`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Implements #9216
## Solution
- Replace `DiagnosticId` by `DiagnosticPath`. It's pre-hashed using
`const-fnv1a-hash` crate, so it's possible to create path in const
contexts.
---
## Changelog
- Replaced `DiagnosticId` by `DiagnosticPath`
- Set default history length to 120 measurements (2 seconds on 60 fps).
I've noticed hardcoded constant 20 everywhere and decided to change it
to `DEFAULT_MAX_HISTORY_LENGTH` , which is set to new diagnostics by
default. To override it, use `with_max_history_length`.
## Migration Guide
```diff
- const UNIQUE_DIAG_ID: DiagnosticId = DiagnosticId::from_u128(42);
+ const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");
- Diagnostic::new(UNIQUE_DIAG_ID, "example", 10)
+ Diagnostic::new(UNIQUE_DIAG_PATH).with_max_history_length(10)
- diagnostics.add_measurement(UNIQUE_DIAG_ID, || 42);
+ diagnostics.add_measurement(&UNIQUE_DIAG_ID, || 42);
```
# Objective
- `FromType<T>` for `ReflectComponent` and `ReflectBundle` currently
require `T: FromWorld` for two reasons:
- they include a `from_world` method;
- they create dummy `T`s using `FromWorld` and then `apply` a `&dyn
Reflect` to it to simulate `FromReflect`.
- However `FromWorld`/`Default` may be difficult/weird/impractical to
implement, while `FromReflect` is easier and also more natural for the
job.
- See also
https://discord.com/channels/691052431525675048/1146022009554337792
## Solution
- Split `from_world` from `ReflectComponent` and `ReflectBundle` into
its own `ReflectFromWorld` struct.
- Replace the requirement on `FromWorld` in `ReflectComponent` and
`ReflectBundle` with `FromReflect`
---
## Changelog
- `ReflectComponent` and `ReflectBundle` no longer offer a `from_world`
method.
- `ReflectComponent` and `ReflectBundle`'s `FromType<T>` implementation
no longer requires `T: FromWorld`, but now requires `FromReflect`.
- `ReflectComponent::insert`, `ReflectComponent::apply_or_insert` and
`ReflectComponent::copy` now take an extra `&TypeRegistry` parameter.
- There is now a new `ReflectFromWorld` struct.
## Migration Guide
- Existing uses of `ReflectComponent::from_world` and
`ReflectBundle::from_world` will have to be changed to
`ReflectFromWorld::from_world`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` will need to
also implement/derive `FromReflect`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` may now want
to also add `FromWorld` to the list of reflected traits in case their
`FromReflect` implementation may fail.
- Users of `ReflectComponent` will now need to pass a `&TypeRegistry` to
its `insert`, `apply_or_insert` and `copy` methods.
This pull request re-submits #10057, which was backed out for breaking
macOS, iOS, and Android. I've tested this version on macOS and Android
and on the iOS simulator.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
- Example `deterministic` crashes on CI on Windows because it uses too
much memory
## Solution
- Reduce the number of planes displayed while still having the issue
- While there, add a small margin to the text so that it's prettier
# Objective
This PR aims to implement multiple configs for gizmos as discussed in
#9187.
## Solution
Configs for the new `GizmoConfigGroup`s are stored in a
`GizmoConfigStore` resource and can be accesses using a type based key
or iterated over. This type based key doubles as a standardized location
where plugin authors can put their own configuration not covered by the
standard `GizmoConfig` struct. For example the `AabbGizmoGroup` has a
default color and toggle to show all AABBs. New configs can be
registered using `app.init_gizmo_group::<T>()` during startup.
When requesting the `Gizmos<T>` system parameter the generic type
determines which config is used. The config structs are available
through the `Gizmos` system parameter allowing for easy access while
drawing your gizmos.
Internally, resources and systems used for rendering (up to an including
the extract system) are generic over the type based key and inserted on
registering a new config.
## Alternatives
The configs could be stored as components on entities with markers which
would make better use of the ECS. I also implemented this approach
([here](https://github.com/jeliag/bevy/tree/gizmo-multiconf-comp)) and
believe that the ergonomic benefits of a central config store outweigh
the decreased use of the ECS.
## Unsafe Code
Implementing system parameter by hand is unsafe but seems to be required
to access the config store once and not on every gizmo draw function
call. This is critical for performance. ~Is there a better way to do
this?~
## Future Work
New gizmos (such as #10038, and ideas from #9400) will require custom
configuration structs. Should there be a new custom config for every
gizmo type, or should we group them together in a common configuration?
(for example `EditorGizmoConfig`, or something more fine-grained)
## Changelog
- Added `GizmoConfigStore` resource and `GizmoConfigGroup` trait
- Added `init_gizmo_group` to `App`
- Added early returns to gizmo drawing increasing performance when
gizmos are disabled
- Changed `GizmoConfig` and aabb gizmos to use new `GizmoConfigStore`
- Changed `Gizmos` system parameter to use type based key to retrieve
config
- Changed resources and systems used for gizmo rendering to be generic
over type based key
- Changed examples (3d_gizmos, 2d_gizmos) to showcase new API
## Migration Guide
- `GizmoConfig` is no longer a resource and has to be accessed through
`GizmoConfigStore` resource. The default config group is
`DefaultGizmoGroup`, but consider using your own custom config group if
applicable.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Fixes#11376
During the development of the exposure settings PR (#11347) all examples
with lighting had to be adjusted, but three were missed or simply didn't
exist yet at the time. This PR restores the brightness in those examples
again:
render_ui_to_texture
asset_loading
hot_asset_reloading
All of them are a bit brighter now compared to before the exposure PR,
but it looks better IMO.
# Objective
Expand the existing `Query` API to support more dynamic use cases i.e.
scripting.
## Prior Art
- #6390
- #8308
- #10037
## Solution
- Create a `QueryBuilder` with runtime methods to define the set of
component accesses for a built query.
- Create new `WorldQueryData` implementations `FilteredEntityMut` and
`FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that
provide run time checked access to the components included in a given
query.
- Add new methods to `Query` to create "query lens" with a subset of the
access of the initial query.
### Query Builder
The `QueryBuilder` API allows you to define a query at runtime. At it's
most basic use it will simply create a query with the corresponding type
signature:
```rust
let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build();
// is equivalent to
let query = QueryState::<Entity, With<A>>::new(&mut world);
```
Before calling `.build()` you also have the opportunity to add
additional accesses and filters. Here is a simple example where we add
additional filter terms:
```rust
let entity_a = world.spawn((A(0), B(0))).id();
let entity_b = world.spawn((A(0), C(0))).id();
let mut query_a = QueryBuilder::<Entity>::new(&mut world)
.with::<A>()
.without::<C>()
.build();
assert_eq!(entity_a, query_a.single(&world));
```
This alone is useful in that allows you to decide which archetypes your
query will match at runtime. However it is also very limited, consider a
case like the following:
```rust
let query_a = QueryBuilder::<&A>::new(&mut world)
// Add an additional access
.data::<&B>()
.build();
```
This will grant the query an additional read access to component B
however we have no way of accessing the data while iterating as the type
signature still only includes &A. For an even more concrete example of
this consider dynamic components:
```rust
let query_a = QueryBuilder::<Entity>::new(&mut world)
// Adding a filter is easy since it doesn't need be read later
.with_id(component_id_a)
// How do I access the data of this component?
.ref_id(component_id_b)
.build();
```
With this in mind the `QueryBuilder` API seems somewhat incomplete by
itself, we need some way method of accessing the components dynamically.
So here's one:
### Query Transmutation
If the problem is not having the component in the type signature why not
just add it? This PR also adds transmute methods to `QueryBuilder` and
`QueryState`. Here's a simple example:
```rust
world.spawn(A(0));
world.spawn((A(1), B(0)));
let mut query = QueryBuilder::<()>::new(&mut world)
.with::<B>()
.transmute::<&A>()
.build();
query.iter(&world).for_each(|a| assert_eq!(a.0, 1));
```
The `QueryState` and `QueryBuilder` transmute methods look quite similar
but are different in one respect. Transmuting a builder will always
succeed as it will just add the additional accesses needed for the new
terms if they weren't already included. Transmuting a `QueryState` will
panic in the case that the new type signature would give it access it
didn't already have, for example:
```rust
let query = QueryState::<&A, Option<&B>>::new(&mut world);
/// This is fine, the access for Option<&A> is less restrictive than &A
query.transmute::<Option<&A>>(&world);
/// Oh no, this would allow access to &B on entities that might not have it, so it panics
query.transmute::<&B>(&world);
/// This is right out
query.transmute::<&C>(&world);
```
This is quite an appealing API to also have available on `Query` however
it does pose one additional wrinkle: In order to to change the iterator
we need to create a new `QueryState` to back it. `Query` doesn't own
it's own state though, it just borrows it, so we need a place to borrow
it from. This is why `QueryLens` exists, it is a place to store the new
state so it can be borrowed when you call `.query()` leaving you with an
API like this:
```rust
fn function_that_takes_a_query(query: &Query<&A>) {
// ...
}
fn system(query: Query<(&A, &B)>) {
let lens = query.transmute_lens::<&A>();
let q = lens.query();
function_that_takes_a_query(&q);
}
```
Now you may be thinking: Hey, wait a second, you introduced the problem
with dynamic components and then described a solution that only works
for static components! Ok, you got me, I guess we need a bit more:
### Filtered Entity References
Currently the only way you can access dynamic components on entities
through a query is with either `EntityMut` or `EntityRef`, however these
can access all components and so conflict with all other accesses. This
PR introduces `FilteredEntityMut` and `FilteredEntityRef` as
alternatives that have additional runtime checking to prevent accessing
components that you shouldn't. This way you can build a query with a
`QueryBuilder` and actually access the components you asked for:
```rust
let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world)
.ref_id(component_id_a)
.with(component_id_b)
.build();
let entity_ref = query.single(&world);
// Returns Some(Ptr) as we have that component and are allowed to read it
let a = entity_ref.get_by_id(component_id_a);
// Will return None even though the entity does have the component, as we are not allowed to read it
let b = entity_ref.get_by_id(component_id_b);
```
For the most part these new structs have the exact same methods as their
non-filtered equivalents.
Putting all of this together we can do some truly dynamic ECS queries,
check out the `dynamic` example to see it in action:
```
Commands:
comp, c Create new components
spawn, s Spawn entities
query, q Query for entities
Enter a command with no parameters for usage.
> c A, B, C, Data 4
Component A created with id: 0
Component B created with id: 1
Component C created with id: 2
Component Data created with id: 3
> s A, B, Data 1
Entity spawned with id: 0v0
> s A, C, Data 0
Entity spawned with id: 1v0
> q &Data
0v0: Data: [1, 0, 0, 0]
1v0: Data: [0, 0, 0, 0]
> q B, &mut Data
0v0: Data: [2, 1, 1, 1]
> q B || C, &Data
0v0: Data: [2, 1, 1, 1]
1v0: Data: [0, 0, 0, 0]
```
## Changelog
- Add new `transmute_lens` methods to `Query`.
- Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef`
and `QueryLens`
- `update_archetype_component_access` has been removed, archetype
component accesses are now determined by the accesses set in
`update_component_access`
- Added method `set_access` to `WorldQuery`, this is called before
`update_component_access` for queries that have a restricted set of
accesses, such as those built by `QueryBuilder` or `QueryLens`. This is
primarily used by the `FilteredEntity*` variants and has an empty trait
implementation.
- Added method `get_state` to `WorldQuery` as a fallible version of
`init_state` when you don't have `&mut World` access.
## Future Work
Improve performance of `FilteredEntityMut` and `FilteredEntityRef`,
currently they have to determine the accesses a query has in a given
archetype during iteration which is far from ideal, especially since we
already did the work when matching the archetype in the first place. To
avoid making more internal API changes I have left it out of this PR.
---------
Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
Rebased and finished version of
https://github.com/bevyengine/bevy/pull/8407. Huge thanks to @GitGhillie
for adjusting all the examples, and the many other people who helped
write this PR (@superdump , @coreh , among others) :)
Fixes https://github.com/bevyengine/bevy/issues/8369
---
## Changelog
- Added a `brightness` control to `Skybox`.
- Added an `intensity` control to `EnvironmentMapLight`.
- Added `ExposureSettings` and `PhysicalCameraParameters` for
controlling exposure of 3D cameras.
- Removed the baked-in `DirectionalLight` exposure Bevy previously
hardcoded internally.
## Migration Guide
- If using a `Skybox` or `EnvironmentMapLight`, use the new `brightness`
and `intensity` controls to adjust their strength.
- All 3D scene will now have different apparent brightnesses due to Bevy
implementing proper exposure controls. You will have to adjust the
intensity of your lights and/or your camera exposure via the new
`ExposureSettings` component to compensate.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: GitGhillie <jillisnoordhoek@gmail.com>
Co-authored-by: Marco Buono <thecoreh@gmail.com>
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
> Old MR: #5072
> ~~Associated UI MR: #5070~~
> Adresses #1618
Unify sprite management
## Solution
- Remove the `Handle<Image>` field in `TextureAtlas` which is the main
cause for all the boilerplate
- Remove the redundant `TextureAtlasSprite` component
- Renamed `TextureAtlas` asset to `TextureAtlasLayout`
([suggestion](https://github.com/bevyengine/bevy/pull/5103#discussion_r917281844))
- Add a `TextureAtlas` component, containing the atlas layout handle and
the section index
The difference between this solution and #5072 is that instead of the
`enum` approach is that we can more easily manipulate texture sheets
without any breaking changes for classic `SpriteBundle`s (@mockersf
[comment](https://github.com/bevyengine/bevy/pull/5072#issuecomment-1165836139))
Also, this approach is more *data oriented* extracting the
`Handle<Image>` and avoiding complex texture atlas manipulations to
retrieve the texture in both applicative and engine code.
With this method, the only difference between a `SpriteBundle` and a
`SpriteSheetBundle` is an **additional** component storing the atlas
handle and the index.
~~This solution can be applied to `bevy_ui` as well (see #5070).~~
EDIT: I also applied this solution to Bevy UI
## Changelog
- (**BREAKING**) Removed `TextureAtlasSprite`
- (**BREAKING**) Renamed `TextureAtlas` to `TextureAtlasLayout`
- (**BREAKING**) `SpriteSheetBundle`:
- Uses a `Sprite` instead of a `TextureAtlasSprite` component
- Has a `texture` field containing a `Handle<Image>` like the
`SpriteBundle`
- Has a new `TextureAtlas` component instead of a
`Handle<TextureAtlasLayout>`
- (**BREAKING**) `DynamicTextureAtlasBuilder::add_texture` takes an
additional `&Handle<Image>` parameter
- (**BREAKING**) `TextureAtlasLayout::from_grid` no longer takes a
`Handle<Image>` parameter
- (**BREAKING**) `TextureAtlasBuilder::finish` now returns a
`Result<(TextureAtlasLayout, Handle<Image>), _>`
- `bevy_text`:
- `GlyphAtlasInfo` stores the texture `Handle<Image>`
- `FontAtlas` stores the texture `Handle<Image>`
- `bevy_ui`:
- (**BREAKING**) Removed `UiAtlasImage` , the atlas bundle is now
identical to the `ImageBundle` with an additional `TextureAtlas`
## Migration Guide
* Sprites
```diff
fn my_system(
mut images: ResMut<Assets<Image>>,
- mut atlases: ResMut<Assets<TextureAtlas>>,
+ mut atlases: ResMut<Assets<TextureAtlasLayout>>,
asset_server: Res<AssetServer>
) {
let texture_handle: asset_server.load("my_texture.png");
- let layout = TextureAtlas::from_grid(texture_handle, Vec2::new(25.0, 25.0), 5, 5, None, None);
+ let layout = TextureAtlasLayout::from_grid(Vec2::new(25.0, 25.0), 5, 5, None, None);
let layout_handle = atlases.add(layout);
commands.spawn(SpriteSheetBundle {
- sprite: TextureAtlasSprite::new(0),
- texture_atlas: atlas_handle,
+ atlas: TextureAtlas {
+ layout: layout_handle,
+ index: 0
+ },
+ texture: texture_handle,
..Default::default()
});
}
```
* UI
```diff
fn my_system(
mut images: ResMut<Assets<Image>>,
- mut atlases: ResMut<Assets<TextureAtlas>>,
+ mut atlases: ResMut<Assets<TextureAtlasLayout>>,
asset_server: Res<AssetServer>
) {
let texture_handle: asset_server.load("my_texture.png");
- let layout = TextureAtlas::from_grid(texture_handle, Vec2::new(25.0, 25.0), 5, 5, None, None);
+ let layout = TextureAtlasLayout::from_grid(Vec2::new(25.0, 25.0), 5, 5, None, None);
let layout_handle = atlases.add(layout);
commands.spawn(AtlasImageBundle {
- texture_atlas_image: UiTextureAtlasImage {
- index: 0,
- flip_x: false,
- flip_y: false,
- },
- texture_atlas: atlas_handle,
+ atlas: TextureAtlas {
+ layout: layout_handle,
+ index: 0
+ },
+ image: UiImage {
+ texture: texture_handle,
+ flip_x: false,
+ flip_y: false,
+ },
..Default::default()
});
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
Add support for presenting each UI tree on a specific window and
viewport, while making as few breaking changes as possible.
This PR is meant to resolve the following issues at once, since they're
all related.
- Fixes#5622
- Fixes#5570
- Fixes#5621
Adopted #5892 , but started over since the current codebase diverged
significantly from the original PR branch. Also, I made a decision to
propagate component to children instead of recursively iterating over
nodes in search for the root.
## Solution
Add a new optional component that can be inserted to UI root nodes and
propagate to children to specify which camera it should render onto.
This is then used to get the render target and the viewport for that UI
tree. Since this component is optional, the default behavior should be
to render onto the single camera (if only one exist) and warn of
ambiguity if multiple cameras exist. This reduces the complexity for
users with just one camera, while giving control in contexts where it
matters.
## Changelog
- Adds `TargetCamera(Entity)` component to specify which camera should a
node tree be rendered into. If only one camera exists, this component is
optional.
- Adds an example of rendering UI to a texture and using it as a
material in a 3D world.
- Fixes recalculation of physical viewport size when target scale factor
changes. This can happen when the window is moved between displays with
different DPI.
- Changes examples to demonstrate assigning UI to different viewports
and windows and make interactions in an offset viewport testable.
- Removes `UiCameraConfig`. UI visibility now can be controlled via
combination of explicit `TargetCamera` and `Visibility` on the root
nodes.
---------
Co-authored-by: davier <bricedavier@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
> Replaces #5213
# Objective
Implement sprite tiling and [9 slice
scaling](https://en.wikipedia.org/wiki/9-slice_scaling) for
`bevy_sprite`.
Allowing slice scaling and texture tiling.
Basic scaling vs 9 slice scaling:
Slicing example:
<img width="481" alt="Screenshot 2022-07-05 at 15 05 49"
src="https://user-images.githubusercontent.com/26703856/177336112-9e961af0-c0af-4197-aec9-430c1170a79d.png">
Tiling example:
<img width="1329" alt="Screenshot 2023-11-16 at 13 53 32"
src="https://github.com/bevyengine/bevy/assets/26703856/14db39b7-d9e0-4bc3-ba0e-b1f2db39ae8f">
# Solution
- `SpriteBundlue` now has a `scale_mode` component storing a
`SpriteScaleMode` enum with three variants:
- `Stretched` (default)
- `Tiled` to have sprites tile horizontally and/or vertically
- `Sliced` allowing 9 slicing the texture and optionally tile some
sections with a `Textureslicer`.
- `bevy_sprite` has two extra systems to compute a
`ComputedTextureSlices` if necessary,:
- One system react to changes on `Sprite`, `Handle<Image>` or
`SpriteScaleMode`
- The other listens to `AssetEvent<Image>` to compute slices on sprites
when the texture is ready or changed
- I updated the `bevy_sprite` extraction stage to extract potentially
multiple textures instead of one, depending on the presence of
`ComputedTextureSlices`
- I added two examples showcasing the slicing and tiling feature.
The addition of `ComputedTextureSlices` as a cache is to avoid querying
the image data, to retrieve its dimensions, every frame in a extract or
prepare stage. Also it reacts to changes so we can have stuff like this
(tiling example):
https://github.com/bevyengine/bevy/assets/26703856/a349a9f3-33c3-471f-8ef4-a0e5dfce3b01
# Related
- [ ] Once #5103 or #10099 is merged I can enable tiling and slicing for
texture sheets as ui
# To discuss
There is an other option, to consider slice/tiling as part of the asset,
using the new asset preprocessing but I have no clue on how to do it.
Also, instead of retrieving the Image dimensions, we could use the same
system as the sprite sheet and have the user give the image dimensions
directly (grid). But I think it's less user friendly
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
This PR is heavily inspired by
https://github.com/bevyengine/bevy/pull/7682
It aims to solve the same problem: allowing the user to extend the
tracing subscriber with extra layers.
(in my case, I'd like to use `use
metrics_tracing_context::{MetricsLayer, TracingContextLayer};`)
## Solution
I'm proposing a different api where the user has the opportunity to take
the existing `subscriber` and apply any transformations on it.
---
## Changelog
- Added a `update_subscriber` option on the `LogPlugin` that lets the
user modify the `subscriber` (for example to extend it with more tracing
`Layers`
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- Added a new field `update_subscriber` in the `LogPlugin`
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
Unify flycam-style camera controller from the examples.
`parallax_mapping` controller was kept as is.
## Solution
Fixed some mouse movement & cursor grabbing related issues too.
# Objective
Issue #10243: rendering multiple triangles in the same place results in
flickering.
## Solution
Considered these alternatives:
- `depth_bias` may not work, because of high number of entities, so
creating a material per entity is practically not possible
- rendering at slightly different positions does not work, because when
camera is far, float rounding causes the same issues (edit: assuming we
have to use the same `depth_bias`)
- considered implementing deterministic operation like
`query.par_iter().flat_map(...).collect()` to be used in
`check_visibility` system (which would solve the issue since query is
deterministic), and could not figure out how to make it as cheap as
current approach with thread-local collectors (#11249)
So adding an option to sort entities after `check_visibility` system
run.
Should not be too bad, because after visibility check, only a handful
entities remain.
This is probably not the only source of non-determinism in Bevy, but
this is one I could find so far. At least it fixes the repro example.
## Changelog
- `DeterministicRenderingConfig` option to enable deterministic
rendering
## Test
<img width="1392" alt="image"
src="https://github.com/bevyengine/bevy/assets/28969/c735bce1-3a71-44cd-8677-c19f6c0ee6bd">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Update to `glam` 0.25, `encase` 0.7 and `hexasphere` to 10.0
## Changelog
Added the `FloatExt` trait to the `bevy_math` prelude which adds `lerp`,
`inverse_lerp` and `remap` methods to the `f32` and `f64` types.
# Objective
Re this comment:
https://github.com/bevyengine/bevy/pull/11141#issuecomment-1872455313
Since https://github.com/bevyengine/bevy/pull/9822, Bevy automatically
inserts `apply_deferred` between systems with dependencies where needed,
so manually inserted `apply_deferred` doesn't to anything useful, and in
current state this example does more harm than good.
## Solution
The example can be modified with removal of automatic `apply_deferred`
insertion, but that would immediately upgrade this example from beginner
level, to upper intermediate. Most users don't need to disable automatic
sync point insertion, and remaining few who do probably already know how
it works.
CC @hymm
# Objective
- Make it possible to react to arbitrary state changes
- this will be useful regardless of the other changes to states
currently being discussed
## Solution
- added `StateTransitionEvent<S>` struct
- previously, this would have been impossible:
```rs
#[derive(States, Eq, PartialEq, Hash, Copy, Clone, Default)]
enum MyState {
#[default]
Foo,
Bar(MySubState),
}
enum MySubState {
Spam,
Eggs,
}
app.add_system(Update, on_enter_bar);
fn on_enter_bar(trans: EventReader<StateTransition<MyState>>){
for (befoare, after) in trans.read() {
match before, after {
MyState::Foo, MyState::Bar(_) => info!("detected transition foo => bar");
_, _ => ();
}
}
}
```
---
## Changelog
- Added
- `StateTransitionEvent<S>` - Fired on state changes of `S`
## Migration Guide
N/A no breaking changes
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Motivation
When spawning entities into a scene, it is very common to create assets
like meshes and materials and to add them via asset handles. A common
setup might look like this:
```rust
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
commands.spawn(PbrBundle {
mesh: meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
material: materials.add(StandardMaterial::from(Color::RED)),
..default()
});
}
```
Let's take a closer look at the part that adds the assets using `add`.
```rust
mesh: meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
material: materials.add(StandardMaterial::from(Color::RED)),
```
Here, "mesh" and "material" are both repeated three times. It's very
explicit, but I find it to be a bit verbose. In addition to being more
code to read and write, the extra characters can sometimes also lead to
the code being formatted to span multiple lines even though the core
task, adding e.g. a primitive mesh, is extremely simple.
A way to address this is by using `.into()`:
```rust
mesh: meshes.add(shape::Cube { size: 1.0 }.into()),
material: materials.add(Color::RED.into()),
```
This is fine, but from the names and the type of `meshes`, we already
know what the type should be. It's very clear that `Cube` should be
turned into a `Mesh` because of the context it's used in. `.into()` is
just seven characters, but it's so common that it quickly adds up and
gets annoying.
It would be nice if you could skip all of the conversion and let Bevy
handle it for you:
```rust
mesh: meshes.add(shape::Cube { size: 1.0 }),
material: materials.add(Color::RED),
```
# Objective
Make adding assets more ergonomic by making `Assets::add` take an `impl
Into<A>` instead of `A`.
## Solution
`Assets::add` now takes an `impl Into<A>` instead of `A`, so e.g. this
works:
```rust
commands.spawn(PbrBundle {
mesh: meshes.add(shape::Cube { size: 1.0 }),
material: materials.add(Color::RED),
..default()
});
```
I also changed all examples to use this API, which increases consistency
as well because `Mesh::from` and `into` were being used arbitrarily even
in the same file. This also gets rid of some lines of code because
formatting is nicer.
---
## Changelog
- `Assets::add` now takes an `impl Into<A>` instead of `A`
- Examples don't use `T::from(K)` or `K.into()` when adding assets
## Migration Guide
Some `into` calls that worked previously might now be broken because of
the new trait bounds. You need to either remove `into` or perform the
conversion explicitly with `from`:
```rust
// Doesn't compile
let mesh_handle = meshes.add(shape::Cube { size: 1.0 }.into()),
// These compile
let mesh_handle = meshes.add(shape::Cube { size: 1.0 }),
let mesh_handle = meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
```
## Concerns
I believe the primary concerns might be:
1. Is this too implicit?
2. Does this increase codegen bloat?
Previously, the two APIs were using `into` or `from`, and now it's
"nothing" or `from`. You could argue that `into` is slightly more
explicit than "nothing" in cases like the earlier examples where a
`Color` gets converted to e.g. a `StandardMaterial`, but I personally
don't think `into` adds much value even in this case, and you could
still see the actual type from the asset type.
As for codegen bloat, I doubt it adds that much, but I'm not very
familiar with the details of codegen. I personally value the user-facing
code reduction and ergonomics improvements that these changes would
provide, but it might be worth checking the other effects in more
detail.
Another slight concern is migration pain; apps might have a ton of
`into` calls that would need to be removed, and it did take me a while
to do so for Bevy itself (maybe around 20-40 minutes). However, I think
the fact that there *are* so many `into` calls just highlights that the
API could be made nicer, and I'd gladly migrate my own projects for it.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
In my code I use a lot of images as render targets.
I'd like some convenience methods for working with this type.
## Solution
- Allow `.into()` to construct a `RenderTarget`
- Add `.as_image()`
---
## Changelog
### Added
- `RenderTarget` can be constructed via `.into()` on a `Handle<Image>`
- `RenderTarget` new method: `as_image`
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- No point in keeping Meshes/Images in RAM once they're going to be sent
to the GPU, and kept in VRAM. This saves a _significant_ amount of
memory (several GBs) on scenes like bistro.
- References
- https://github.com/bevyengine/bevy/pull/1782
- https://github.com/bevyengine/bevy/pull/8624
## Solution
- Augment RenderAsset with the capability to unload the underlying asset
after extracting to the render world.
- Mesh/Image now have a cpu_persistent_access field. If this field is
RenderAssetPersistencePolicy::Unload, the asset will be unloaded from
Assets<T>.
- A new AssetEvent is sent upon dropping the last strong handle for the
asset, which signals to the RenderAsset to remove the GPU version of the
asset.
---
## Changelog
- Added `AssetEvent::NoLongerUsed` and
`AssetEvent::is_no_longer_used()`. This event is sent when the last
strong handle of an asset is dropped.
- Rewrote the API for `RenderAsset` to allow for unloading the asset
data from the CPU.
- Added `RenderAssetPersistencePolicy`.
- Added `Mesh::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `Image::cpu_persistent_access` for memory savings when the asset
is not needed except for on the GPU.
- Added `ImageLoaderSettings::cpu_persistent_access`.
- Added `ExrTextureLoaderSettings`.
- Added `HdrTextureLoaderSettings`.
## Migration Guide
- Asset loaders (GLTF, etc) now load meshes and textures without
`cpu_persistent_access`. These assets will be removed from
`Assets<Mesh>` and `Assets<Image>` once `RenderAssets<Mesh>` and
`RenderAssets<Image>` contain the GPU versions of these assets, in order
to reduce memory usage. If you require access to the asset data from the
CPU in future frames after the GLTF asset has been loaded, modify all
dependent `Mesh` and `Image` assets and set `cpu_persistent_access` to
`RenderAssetPersistencePolicy::Keep`.
- `Mesh` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `Image` now requires a new `cpu_persistent_access` field. Set it to
`RenderAssetPersistencePolicy::Keep` to mimic the previous behavior.
- `MorphTargetImage::new()` now requires a new `cpu_persistent_access`
parameter. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the
previous behavior.
- `DynamicTextureAtlasBuilder::add_texture()` now requires that the
`TextureAtlas` you pass has an `Image` with `cpu_persistent_access:
RenderAssetPersistencePolicy::Keep`. Ensure you construct the image
properly for the texture atlas.
- The `RenderAsset` trait has significantly changed, and requires
adapting your existing implementations.
- The trait now requires `Clone`.
- The `ExtractedAsset` associated type has been removed (the type itself
is now extracted).
- The signature of `prepare_asset()` is slightly different
- A new `persistence_policy()` method is now required (return
RenderAssetPersistencePolicy::Unload to match the previous behavior).
- Match on the new `NoLongerUsed` variant for exhaustive matches of
`AssetEvent`.
# Objective
Lightmaps, textures that store baked global illumination, have been a
mainstay of real-time graphics for decades. Bevy currently has no
support for them, so this pull request implements them.
## Solution
The new `Lightmap` component can be attached to any entity that contains
a `Handle<Mesh>` and a `StandardMaterial`. When present, it will be
applied in the PBR shader. Because multiple lightmaps are frequently
packed into atlases, each lightmap may have its own UV boundaries within
its texture. An `exposure` field is also provided, to control the
brightness of the lightmap.
Note that this PR doesn't provide any way to bake the lightmaps. That
can be done with [The Lightmapper] or another solution, such as Unity's
Bakery.
---
## Changelog
### Added
* A new component, `Lightmap`, is available, for baked global
illumination. If your mesh has a second UV channel (UV1), and you attach
this component to the entity with that mesh, Bevy will apply the texture
referenced in the lightmap.
[The Lightmapper]: https://github.com/Naxela/The_Lightmapper
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Custom render passes, or future passes in the engine (such as
https://github.com/bevyengine/bevy/pull/10164) need a better way to know
and indicate to the core passes whether the view color/depth/prepass
attachments have been cleared or not yet this frame, to know if they
should clear it themselves or load it.
## Solution
- For all render targets (depth textures, shadow textures, prepass
textures, main textures) use an atomic bool to track whether or not each
texture has been cleared this frame. Abstracted away in the new
ColorAttachment and DepthAttachment wrappers.
---
## Changelog
- Changed `ViewTarget::get_color_attachment()`, removed arguments.
- Changed `ViewTarget::get_unsampled_color_attachment()`, removed
arguments.
- Removed `Camera3d::clear_color`.
- Removed `Camera2d::clear_color`.
- Added `Camera::clear_color`.
- Added `ExtractedCamera::clear_color`.
- Added `ColorAttachment` and `DepthAttachment` wrappers.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- Core render passes now track when a texture is first bound as an
attachment in order to decide whether to clear or load it.
## Migration Guide
- Remove arguments to `ViewTarget::get_color_attachment()` and
`ViewTarget::get_unsampled_color_attachment()`.
- Configure clear color on `Camera` instead of on `Camera3d` and
`Camera2d`.
- Moved `ClearColor` and `ClearColorConfig` from
`bevy::core_pipeline::clear_color` to `bevy::render::camera`.
- `ViewDepthTexture` must now be created via the `new()` method
---------
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix ci hang, so we can merge pr's again.
## Solution
- switch ppa action to use mesa stable versions
https://launchpad.net/~kisak/+archive/ubuntu/turtle
- use commit from #11123
---------
Co-authored-by: Stepan Koltsov <stepan.koltsov@gmail.com>
# Objective
Provide an example of how to achieve pixel-perfect "grid snapping" in 2D
via rendering to a texture. This is a common use case in retro pixel art
game development.
## Solution
Render sprites to a canvas via a Camera, then use another (scaled up)
Camera to render the resulting canvas to the screen. This example is
based on the `3d/render_to_texture.rs` example. Furthermore, this
example demonstrates mixing retro-style graphics with high-resolution
graphics, as well as pixel-snapped rendering of a
`MaterialMesh2dBundle`.
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
Improves #11052
# Changelog
- Remove `Window::fit_canvas_to_parent`, as its resizing on wasm now
respects its CSS configuration.
## Migration Guide
- Remove uses of `Window::fit_canvas_to_parent` in favor of CSS
properties, for example:
```css
canvas {
width: 100%;
height: 100%;
}
```
# Objective
Fix#10731.
## Solution
Rename `App::add_state<T>(&mut self)` to `init_state`, and add
`App::insert_state<T>(&mut self, state: T)`. I decided on these names
because they are more similar to `init_resource` and `insert_resource`.
I also removed the `States` trait's requirement for `Default`. Instead,
`init_state` requires `FromWorld`.
---
## Changelog
- Renamed `App::add_state` to `init_state`.
- Added `App::insert_state`.
- Removed the `States` trait's requirement for `Default`.
## Migration Guide
- Renamed `App::add_state` to `init_state`.
# Objective
- Update winit dependency to 0.29
## Changelog
### KeyCode changes
- Removed `ScanCode`, as it was [replaced by
KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292).
- `ReceivedCharacter.char` is now a `SmolStr`, [relevant
doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text).
- Changed most `KeyCode` values, and added more.
KeyCode has changed meaning. With this PR, it refers to physical
position on keyboard rather than the printed letter on keyboard keys.
In practice this means:
- On QWERTY keyboard layouts, nothing changes
- On any other keyboard layout, `KeyCode` no longer reflects the label
on key.
- This is "good". In bevy 0.12, when you used WASD for movement, users
with non-QWERTY keyboards couldn't play your game! This was especially
bad for non-latin keyboards. Now, WASD represents the physical keys. A
French player will press the ZQSD keys, which are near each other,
Kyrgyz players will use "Цфыв".
- This is "bad" as well. You can't know in advance what the label of the
key for input is. Your UI says "press WASD to move", even if in reality,
they should be pressing "ZQSD" or "Цфыв". You also no longer can use
`KeyCode` for text inputs. In any case, it was a pretty bad API for text
input. You should use `ReceivedCharacter` now instead.
### Other changes
- Use `web-time` rather than `instant` crate.
(https://github.com/rust-windowing/winit/pull/2836)
- winit did split `run_return` in `run_onDemand` and `pump_events`, I
did the same change in bevy_winit and used `pump_events`.
- Removed `return_from_run` from `WinitSettings` as `winit::run` now
returns on supported platforms.
- I left the example "return_after_run" as I think it's still useful.
- This winit change is done partly to allow to create a new window after
quitting all windows: https://github.com/emilk/egui/issues/1918 ; this
PR doesn't address.
- added `width` and `height` properties in the `canvas` from wasm
example
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168)
## Known regressions (important follow ups?)
- Provide an API for reacting when a specific key from current layout
was released.
- possible solutions: use winit::Key from winit::KeyEvent ; mapping
between KeyCode and Key ; or .
- We don't receive characters through alt+numpad (e.g. alt + 151 = "ù")
anymore ; reproduced on winit example "ime". maybe related to
https://github.com/rust-windowing/winit/issues/2945
- (windows) Window content doesn't refresh at all when resizing. By
reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect
we should just fire a `window.request_redraw();` from `AboutToWait`, and
handle actual redrawing within `RedrawRequested`. I'm not sure how to
move all that code so I'd appreciate it to be a follow up.
- (windows) unreleased winit fix for using set_control_flow in
AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm
not sure what the implications are, but that feels bad 🤔
## Follow up
I'd like to avoid bloating this PR, here are a few follow up tasks
worthy of a separate PR, or new issue to track them once this PR is
closed, as they would either complicate reviews, or at risk of being
controversial:
- remove CanvasParentResizePlugin
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856)
- avoid mentionning explicitly winit in docs from bevy_window ?
- NamedKey integration on bevy_input:
https://github.com/rust-windowing/winit/pull/3143 introduced a new
NamedKey variant. I implemented it only on the converters but we'd
benefit making the same changes to bevy_input.
- Add more info in KeyboardInput
https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313
- https://github.com/bevyengine/bevy/pull/9905 added a workaround on a
bug allegedly fixed by winit 0.29. We should check if it's still
necessary.
- update to raw_window_handle 0.6
- blocked by wgpu
- Rename `KeyCode` to `PhysicalKeyCode`
https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015
- remove `instant` dependency, [replaced
by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd
need to update to :
- fastrand >= 2.0
- [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7
- [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0
- Verify license, see
[discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800)
- we might be missing a short notice or description of changes made
- Consider using https://github.com/rust-windowing/cursor-icon directly
rather than vendoring it in bevy.
- investigate [this
unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986)
(`winit_window.canvas().unwrap();`)
- Use more good things about winit's update
- https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428
## Migration Guide
This PR should have one.
# Objective
- Expand the texture_atlas example with padding and show how it can
resolve sprite bleeding for different types of sampling.
- Fixes#9522
## Solution
Updated the texture_atlas example by adding 4 different texture atlases:
1. linear, no padding
2. linear, padding
3. nearest neighbor, no padding
4. nearest neighbor, padding
Now renders one padded and one unpadded texture atlas, and the same
upscaled sprite from each of the new texture atlases. See the screenshot
below (taken on 1080p monitor).
**From left->right:** linear no padding, nearest no padding, linear
padding, nearest padding.
---
---------
Co-authored-by: davidasberg <david.aasberg@gmail.com>
# Objective
- Finish the work done in #8942 .
## Solution
- Rebase the changes made in #8942 and fix the issues stopping it from
being merged earlier
---------
Co-authored-by: Thomas <1234328+thmsgntz@users.noreply.github.com>
# Objective
Keep up to date with wgpu.
## Solution
Update the wgpu version.
Currently blocked on naga_oil updating to naga 0.14 and releasing a new
version.
3d scenes (or maybe any scene with lighting?) currently don't render
anything due to
```
error: naga_oil bug, please file a report: composer failed to build a valid header: Type [2] '' is invalid
= Capability Capabilities(CUBE_ARRAY_TEXTURES) is required
```
I'm not sure what should be passed in for `wgpu::InstanceFlags`, or if we want to make the gles3minorversion configurable (might be useful for debugging?)
Currently blocked on https://github.com/bevyengine/naga_oil/pull/63, and https://github.com/gfx-rs/wgpu/issues/4569 to be fixed upstream in wgpu first.
## Known issues
Amd+windows+vulkan has issues with texture_binding_arrays (see the image [here](https://github.com/bevyengine/bevy/pull/10266#issuecomment-1819946278)), but that'll be fixed in the next wgpu/naga version, and you can just use dx12 as a workaround for now (Amd+linux mesa+vulkan texture_binding_arrays are fixed though).
---
## Changelog
Updated wgpu to 0.18, naga to 0.14.2, and naga_oil to 0.11.
- Windows desktop GL should now be less painful as it no longer requires Angle.
- You can now toggle shader validation and debug information for debug and release builds using `WgpuSettings.instance_flags` and [InstanceFlags](https://docs.rs/wgpu/0.18.0/wgpu/struct.InstanceFlags.html)
## Migration Guide
- `RenderPassDescriptor` `color_attachments` (as well as `RenderPassColorAttachment`, and `RenderPassDepthStencilAttachment`) now use `StoreOp::Store` or `StoreOp::Discard` instead of a `boolean` to declare whether or not they should be stored.
- `RenderPassDescriptor` now have `timestamp_writes` and `occlusion_query_set` fields. These can safely be set to `None`.
- `ComputePassDescriptor` now have a `timestamp_writes` field. This can be set to `None` for now.
- See the [wgpu changelog](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v0180-2023-10-25) for additional details
# Objective
add `RenderLayers` awareness to lights. lights default to
`RenderLayers::layer(0)`, and must intersect the camera entity's
`RenderLayers` in order to affect the camera's output.
note that lights already use renderlayers to filter meshes for shadow
casting. this adds filtering lights per view based on intersection of
camera layers and light layers.
fixes#3462
## Solution
PointLights and SpotLights are assigned to individual views in
`assign_lights_to_clusters`, so we simply cull the lights which don't
match the view layers in that function.
DirectionalLights are global, so we
- add the light layers to the `DirectionalLight` struct
- add the view layers to the `ViewUniform` struct
- check for intersection before processing the light in
`apply_pbr_lighting`
potential issue: when mesh/light layers are smaller than the view layers
weird results can occur. e.g:
camera = layers 1+2
light = layers 1
mesh = layers 2
the mesh does not cast shadows wrt the light as (1 & 2) == 0.
the light affects the view as (1+2 & 1) != 0.
the view renders the mesh as (1+2 & 2) != 0.
so the mesh is rendered and lit, but does not cast a shadow.
this could be fixed (so that the light would not affect the mesh in that
view) by adding the light layers to the point and spot light structs,
but i think the setup is pretty unusual, and space is at a premium in
those structs (adding 4 bytes more would reduce the webgl point+spot
light max count to 240 from 256).
I think typical usage is for cameras to have a single layer, and
meshes/lights to maybe have multiple layers to render to e.g. minimaps
as well as primary views.
if there is a good use case for the above setup and we should support
it, please let me know.
---
## Migration Guide
Lights no longer affect all `RenderLayers` by default, now like cameras
and meshes they default to `RenderLayers::layer(0)`. To recover the
previous behaviour and have all lights affect all views, add a
`RenderLayers::all()` component to the light entity.
# Objective
- Resolves#10853
## Solution
- ~~Changed the name of `Input` struct to `PressableInput`.~~
- Changed the name of `Input` struct to `ButtonInput`.
## Migration Guide
- Breaking Change: Users need to rename `Input` to `ButtonInput` in
their projects.
# Objective
A better alternative version of #10843.
Currently, Bevy has a single `Ray` struct for 3D. To allow better
interoperability with Bevy's primitive shapes (#10572) and some third
party crates (that handle e.g. spatial queries), it would be very useful
to have separate versions for 2D and 3D respectively.
## Solution
Separate `Ray` into `Ray2d` and `Ray3d`. These new structs also take
advantage of the new primitives by using `Direction2d`/`Direction3d` for
the direction:
```rust
pub struct Ray2d {
pub origin: Vec2,
pub direction: Direction2d,
}
pub struct Ray3d {
pub origin: Vec3,
pub direction: Direction3d,
}
```
and by using `Plane2d`/`Plane3d` in `intersect_plane`:
```rust
impl Ray2d {
// ...
pub fn intersect_plane(&self, plane_origin: Vec2, plane: Plane2d) -> Option<f32> {
// ...
}
}
```
---
## Changelog
### Added
- `Ray2d` and `Ray3d`
- `Ray2d::new` and `Ray3d::new` constructors
- `Plane2d::new` and `Plane3d::new` constructors
### Removed
- Removed `Ray` in favor of `Ray3d`
### Changed
- `direction` is now a `Direction2d`/`Direction3d` instead of a vector,
which provides guaranteed normalization
- `intersect_plane` now takes a `Plane2d`/`Plane3d` instead of just a
vector for the plane normal
- `Direction2d` and `Direction3d` now derive `Serialize` and
`Deserialize` to preserve ray (de)serialization
## Migration Guide
`Ray` has been renamed to `Ray3d`.
### Ray creation
Before:
```rust
Ray {
origin: Vec3::ZERO,
direction: Vec3::new(0.5, 0.6, 0.2).normalize(),
}
```
After:
```rust
// Option 1:
Ray3d {
origin: Vec3::ZERO,
direction: Direction3d::new(Vec3::new(0.5, 0.6, 0.2)).unwrap(),
}
// Option 2:
Ray3d::new(Vec3::ZERO, Vec3::new(0.5, 0.6, 0.2))
```
### Plane intersections
Before:
```rust
let result = ray.intersect_plane(Vec2::X, Vec2::Y);
```
After:
```rust
let result = ray.intersect_plane(Vec2::X, Plane2d::new(Vec2::Y));
```
# Objective
The name `TextAlignment` is really deceptive and almost every new user
gets confused about the differences between aligning text with
`TextAlignment`, aligning text with `Style` and aligning text with
anchor (when using `Text2d`).
## Solution
* Rename `TextAlignment` to `JustifyText`. The associated helper methods
are also renamed.
* Improve the doc comments for text explaining explicitly how the
`JustifyText` component affects the arrangement of text.
* Add some extra cases to the `text_debug` example that demonstate the
differences between alignment using `JustifyText` and alignment using
`Style`.
<img width="757" alt="text_debug_2"
src="https://github.com/bevyengine/bevy/assets/27962798/9d53e647-93f9-4bc7-8a20-0d9f783304d2">
---
## Changelog
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
## Migration Guide
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
# Objective
Fixes#10291
This adds a way to easily log messages once within system which are
called every frame.
## Solution
Opted for a macro-based approach. The fact that the 'once' call is
tracked per call site makes the `log_once!()` macro very versatile and
easy-to-use. I suspect it will be very handy for all of us, but
especially beginners, to get some initial feedback from systems without
spamming up the place!
I've made the macro's return its internal `has_fired` state, for
situations in which that might be useful to know (trigger something else
alongside the log, for example).
Please let me know if I placed the macro's in the right location, and if
you would like me to do something more clever with the macro's
themselves, since its looking quite copy-pastey at the moment. I've
tried ways to replace 5 with 1 macro's, but no success yet.
One downside of this approach is: Say you wish to warn the user if a
resource is invalid. In this situation, the
`resource.is_valid()` check would still be performed every frame:
```rust
fn my_system(my_res: Res<MyResource>) {
if !my_res.is_valid() {
warn_once!("resource is invalid!");
}
}
```
If you want to prevent that, you would still need to introduce a local
boolean. I don't think this is a very big deal, as expensive checks
shouldn't be called every frame in any case.
## Changelog
Added: `trace_once!()`, `debug_once!()`, `info_once!()`, `warn_once!()`,
and `error_once!()` log macros which fire only once per call site.
# Objective
After #6547, `Query::for_each` has been capable of automatic
vectorization on certain queries, which is seeing a notable (>50% CPU
time improvements) for iteration. However, `Query::for_each` isn't
idiomatic Rust, and lacks the flexibility of iterator combinators.
Ideally, `Query::iter` and friends should be able to achieve the same
results. However, this does seem to blocked upstream
(rust-lang/rust#104914) by Rust's loop optimizations.
## Solution
This is an intermediate solution and refactor. This moves the
`Query::for_each` implementation onto the `Iterator::fold`
implementation for `QueryIter` instead. This should result in the same
automatic vectorization optimization on all `Iterator` functions that
internally use fold, including `Iterator::for_each`, `Iterator::count`,
etc.
With this, it should close the gap between the two completely.
Internally, this PR changes `Query::for_each` to use
`query.iter().for_each(..)` instead of the duplicated implementation.
Separately, the duplicate implementations of internal iteration (i.e.
`Query::par_for_each`) now use portions of the current `Query::for_each`
implementation factored out into their own functions.
This also massively cleans up our internal fragmentation of internal
iteration options, deduplicating the iteration code used in `for_each`
and `par_iter().for_each()`.
---
## Changelog
Changed: `Query::for_each`, `Query::for_each_mut`, `Query::for_each`,
and `Query::for_each_mut` have been moved to `QueryIter`'s
`Iterator::for_each` implementation, and still retains their performance
improvements over normal iteration. These APIs are deprecated in 0.13
and will be removed in 0.14.
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Make ```DynamicSceneBuilder``` more visible to new bevy learners!
```DynamicSceneBuilder``` is likely to be the most appropriate tool to use when creating dynamic scenes in all but the simplest scenarios. However, it's not mentioned in the scene example. This PR aims to fix this.
## Solution
I've modified the comment above where the ```DynamicScene``` is created to note that ```DynamicSceneBuilder``` can also be used to create the scene. I believe this is the best approach to introduce ```DynamicSceneBuilder``` without adding additional complexity to the example.
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
- Materials should be a more frequent rebind then meshes (due to being
able to use a single vertex buffer, such as in #10164) and therefore
should be in a higher bind group.
---
## Changelog
- For 2d and 3d mesh/material setups (but not UI materials, or other
rendering setups such as gizmos, sprites, or text), mesh data is now in
bind group 1, and material data is now in bind group 2, which is swapped
from how they were before.
## Migration Guide
- Custom 2d and 3d mesh/material shaders should now use bind group 2
`@group(2) @binding(x)` for their bound resources, instead of bind group
1.
- Many internal pieces of rendering code have changed so that mesh data
is now in bind group 1, and material data is now in bind group 2.
Semi-custom rendering setups (that don't use the Material or Material2d
APIs) should adapt to these changes.
# Objective
Related to #10612.
Enable the
[`clippy::manual_let_else`](https://rust-lang.github.io/rust-clippy/master/#manual_let_else)
lint as a warning. The `let else` form seems more idiomatic to me than a
`match`/`if else` that either match a pattern or diverge, and from the
clippy doc, the lint doesn't seem to have any possible false positive.
## Solution
Add the lint as warning in `Cargo.toml`, refactor places where the lint
triggers.
# Objective
- Follow up to #9694
## Solution
- Same api as #9694 but adapted for `BindGroupLayoutEntry`
- Use the same `ShaderStages` visibilty for all entries by default
- Add `BindingType` helper function that mirror the wgsl equivalent and
that make writing layouts much simpler.
Before:
```rust
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
binding: 0,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Texture {
sample_type: TextureSampleType::Float { filterable: true },
view_dimension: TextureViewDimension::D2,
multisampled: false,
},
count: None,
},
BindGroupLayoutEntry {
binding: 1,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Sampler(SamplerBindingType::Filtering),
count: None,
},
BindGroupLayoutEntry {
binding: 2,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Buffer {
ty: bevy::render::render_resource::BufferBindingType::Uniform,
has_dynamic_offset: false,
min_binding_size: Some(PostProcessSettings::min_size()),
},
count: None,
},
],
});
```
After:
```rust
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout"),
&BindGroupLayoutEntries::sequential(
ShaderStages::FRAGMENT,
(
texture_2d_f32(),
sampler(SamplerBindingType::Filtering),
uniform_buffer(false, Some(PostProcessSettings::min_size())),
),
),
);
```
Here's a more extreme example in bevy_solari:
86dab7f5da
---
## Changelog
- Added `BindGroupLayoutEntries` and all `BindingType` helper functions.
## Migration Guide
`RenderDevice::create_bind_group_layout()` doesn't take a
`BindGroupLayoutDescriptor` anymore. You need to provide the parameters
separately
```rust
// 0.12
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
// ...
},
],
});
// 0.13
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout",
&[
BindGroupLayoutEntry {
// ...
},
],
);
```
## TODO
- [x] implement a `Dynamic` variant
- [x] update the `RenderDevice::create_bind_group_layout()` api to match
the one from `RenderDevice::creat_bind_group()`
- [x] docs
# Objective
- Fixes#7680
- This is an updated for https://github.com/bevyengine/bevy/pull/8899
which had the same objective but fell a long way behind the latest
changes
## Solution
The traits `WorldQueryData : WorldQuery` and `WorldQueryFilter :
WorldQuery` have been added and some of the types and functions from
`WorldQuery` has been moved into them.
`ReadOnlyWorldQuery` has been replaced with `ReadOnlyWorldQueryData`.
`WorldQueryFilter` is safe (as long as `WorldQuery` is implemented
safely).
`WorldQueryData` is unsafe - safely implementing it requires that
`Self::ReadOnly` is a readonly version of `Self` (this used to be a
safety requirement of `WorldQuery`)
The type parameters `Q` and `F` of `Query` must now implement
`WorldQueryData` and `WorldQueryFilter` respectively.
This makes it impossible to accidentally use a filter in the data
position or vice versa which was something that could lead to bugs.
~~Compile failure tests have been added to check this.~~
It was previously sometimes useful to use `Option<With<T>>` in the data
position. Use `Has<T>` instead in these cases.
The `WorldQuery` derive macro has been split into separate derive macros
for `WorldQueryData` and `WorldQueryFilter`.
Previously it was possible to derive both `WorldQuery` for a struct that
had a mixture of data and filter items. This would not work correctly in
some cases but could be a useful pattern in others. *This is no longer
possible.*
---
## Notes
- The changes outside of `bevy_ecs` are all changing type parameters to
the new types, updating the macro use, or replacing `Option<With<T>>`
with `Has<T>`.
- All `WorldQueryData` types always returned `true` for `IS_ARCHETYPAL`
so I moved it to `WorldQueryFilter` and
replaced all calls to it with `true`. That should be the only logic
change outside of the macro generation code.
- `Changed<T>` and `Added<T>` were being generated by a macro that I
have expanded. Happy to revert that if desired.
- The two derive macros share some functions for implementing
`WorldQuery` but the tidiest way I could find to implement them was to
give them a ton of arguments and ask clippy to ignore that.
## Changelog
### Changed
- Split `WorldQuery` into `WorldQueryData` and `WorldQueryFilter` which
now have separate derive macros. It is not possible to derive both for
the same type.
- `Query` now requires that the first type argument implements
`WorldQueryData` and the second implements `WorldQueryFilter`
## Migration Guide
- Update derives
```rust
// old
#[derive(WorldQuery)]
#[world_query(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA
}
#[derive(WorldQuery)]
struct QueryFilter {
_c: With<ComponentC>
}
// new
#[derive(WorldQueryData)]
#[world_query_data(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA,
}
#[derive(WorldQueryFilter)]
struct QueryFilter {
_c: With<ComponentC>
}
```
- Replace `Option<With<T>>` with `Has<T>`
```rust
/// old
fn my_system(query: Query<(Entity, Option<With<ComponentA>>)>)
{
for (entity, has_a_option) in query.iter(){
let has_a:bool = has_a_option.is_some();
//todo!()
}
}
/// new
fn my_system(query: Query<(Entity, Has<ComponentA>)>)
{
for (entity, has_a) in query.iter(){
//todo!()
}
}
```
- Fix queries which had filters in the data position or vice versa.
```rust
// old
fn my_system(query: Query<(Entity, With<ComponentA>)>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Entity, With<ComponentA>>)
{
for entity in query.iter(){
//todo!()
}
}
// old
fn my_system(query: Query<AnyOf<(&ComponentA, With<ComponentB>)>>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Option<&ComponentA>, Or<(With<ComponentA>, With<ComponentB>)>>)
{
for entity in query.iter(){
//todo!()
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I tried setting `ClearColorConfig` in my app via `Color::FOO.into()`
expecting it to work, but the impl was missing.
## Solution
- Add `impl From<Color> for ClearColorConfig`
- Change examples to use this impl
## Changelog
### Added
- `ClearColorConfig` can be constructed via `.into()` on a `Color`
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
The `nondeterministic_system_order` example doesn't actually detect and
log its deliberate order ambiguities! It should, tho.
## Solution
Update the schedule label, and explain in a comment that you can't turn
it on for the whole `Main` schedule in one go (alas, that would be nice,
but it makes sense that it doesn't work that way).
# Objective
Problems:
* The clipped, non-visible regions of UI nodes are interactive.
* `RelativeCursorPostion` is set relative to the visible part of the
node. It should be relative to the whole node.
* The `RelativeCursorPostion::mouse_over` method returns `true` when the
mouse is over a clipped part of a node.
fixes#10470
## Solution
Intersect a node's bounding rect with its clipping rect before checking
if it contains the cursor.
Added the field `normalized_visible_node_rect` to
`RelativeCursorPosition`. This is set to the bounds of the unclipped
area of the node rect by `ui_focus_system` expressed in normalized
coordinates relative to the entire node.
Instead of checking if the normalized cursor position lies within a unit
square, it instead checks if it is contained by
`normalized_visible_node_rect`.
Added outlines to the `overflow` example that appear when the cursor is
over the visible part of the images, but not the clipped area.
---
## Changelog
* `ui_focus_system` intersects a node's bounding rect with its clipping
rect before checking if mouse over.
* Added the field `normalized_visible_node_rect` to
`RelativeCursorPosition`. This is set to the bounds of the unclipped
area of the node rect by `ui_focus_system` expressed in normalized
coordinates relative to the entire node.
* `RelativeCursorPostion` is calculated relative to the whole node's
position and size, not only the visible part.
* `RelativeCursorPosition::mouse_over` only returns true when the mouse
is over an unclipped region of the UI node.
* Removed the `Deref` and `DerefMut` derives from
`RelativeCursorPosition` as it is no longer a single field struct.
* Added some outlines to the `overflow` example that respond to
`Interaction` changes.
## Migration Guide
The clipped areas of UI nodes are no longer interactive.
`RelativeCursorPostion` is now calculated relative to the whole node's
position and size, not only the visible part. Its `mouse_over` method
only returns true when the cursor is over an unclipped part of the node.
`RelativeCursorPosition` no longer implements `Deref` and `DerefMut`.
# Objective
- I've been experimenting with different patterns to try and make async
tasks more convenient. One of the better ones I've found is to return a
command queue to allow for deferred &mut World access. It can be
convenient to check for task completion in a normal system, but it is
hard to do something with the command queue after getting it back. This
pr adds a `append` to Commands. This allows appending the returned
command queue onto the system's commands.
## Solution
- I edited the async compute example to use the new `append`, but not
sure if I should keep the example changed as this might be too
opinionated.
## Future Work
- It would be very easy to pull the pattern used in the example out into
a plugin or a external crate, so users wouldn't have to add the checking
system.
---
## Changelog
- add `append` to `Commands` and `CommandQueue`
# Objective
- The current shader code is misleading since it makes it look like a
struct is passed to the bind group 0 but in reality only the color is
passed. They just happen to have the exact same memory layout so wgsl
doesn't complain and it works.
- The struct is defined after the `impl Material` block which is
backwards from pretty much every other usage of the `impl` block in
bevy.
## Solution
- Remove the unnecessary struct in the shader
- move the impl block
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Fixes#10518
## Solution
I've added a method to `LoadContext`, `load_direct_with_reader`, which
mirrors the behaviour of `load_direct` with a single key difference: it
is provided with the `Reader` by the caller, rather than getting it from
the contained `AssetServer`. This allows for an `AssetLoader` to process
its `Reader` stream, and then directly hand the results off to the
`LoadContext` to handle further loading. The outer `AssetLoader` can
control how the `Reader` is interpreted by providing a relevant
`AssetPath`.
For example, a Gzip decompression loader could process the asset
`images/my_image.png.gz` by decompressing the bytes, then handing the
decompressed result to the `LoadContext` with the new path
`images/my_image.png.gz/my_image.png`. This intuitively reflects the
nature of contained assets, whilst avoiding unintended behaviour, since
the generated path cannot be a real file path (a file and folder of the
same name cannot coexist in most file-systems).
```rust
#[derive(Asset, TypePath)]
pub struct GzAsset {
pub uncompressed: ErasedLoadedAsset,
}
#[derive(Default)]
pub struct GzAssetLoader;
impl AssetLoader for GzAssetLoader {
type Asset = GzAsset;
type Settings = ();
type Error = GzAssetLoaderError;
fn load<'a>(
&'a self,
reader: &'a mut Reader,
_settings: &'a (),
load_context: &'a mut LoadContext,
) -> BoxedFuture<'a, Result<Self::Asset, Self::Error>> {
Box::pin(async move {
let compressed_path = load_context.path();
let file_name = compressed_path
.file_name()
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?
.to_string_lossy();
let uncompressed_file_name = file_name
.strip_suffix(".gz")
.ok_or(GzAssetLoaderError::IndeterminateFilePath)?;
let contained_path = compressed_path.join(uncompressed_file_name);
let mut bytes_compressed = Vec::new();
reader.read_to_end(&mut bytes_compressed).await?;
let mut decoder = GzDecoder::new(bytes_compressed.as_slice());
let mut bytes_uncompressed = Vec::new();
decoder.read_to_end(&mut bytes_uncompressed)?;
// Now that we have decompressed the asset, let's pass it back to the
// context to continue loading
let mut reader = VecReader::new(bytes_uncompressed);
let uncompressed = load_context
.load_direct_with_reader(&mut reader, contained_path)
.await?;
Ok(GzAsset { uncompressed })
})
}
fn extensions(&self) -> &[&str] {
&["gz"]
}
}
```
Because this example is so prudent, I've included an
`asset_decompression` example which implements this exact behaviour:
```rust
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.init_asset::<GzAsset>()
.init_asset_loader::<GzAssetLoader>()
.add_systems(Startup, setup)
.add_systems(Update, decompress::<Image>)
.run();
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
commands.spawn(Camera2dBundle::default());
commands.spawn((
Compressed::<Image> {
compressed: asset_server.load("data/compressed_image.png.gz"),
..default()
},
Sprite::default(),
TransformBundle::default(),
VisibilityBundle::default(),
));
}
fn decompress<A: Asset>(
mut commands: Commands,
asset_server: Res<AssetServer>,
mut compressed_assets: ResMut<Assets<GzAsset>>,
query: Query<(Entity, &Compressed<A>)>,
) {
for (entity, Compressed { compressed, .. }) in query.iter() {
let Some(GzAsset { uncompressed }) = compressed_assets.remove(compressed) else {
continue;
};
let uncompressed = uncompressed.take::<A>().unwrap();
commands
.entity(entity)
.remove::<Compressed<A>>()
.insert(asset_server.add(uncompressed));
}
}
```
A key limitation to this design is how to type the internally loaded
asset, since the example `GzAssetLoader` is unaware of the internal
asset type `A`. As such, in this example I store the contained asset as
an `ErasedLoadedAsset`, and leave it up to the consumer of the `GzAsset`
to handle typing the final result, which is the purpose of the
`decompress` system. This limitation can be worked around by providing
type information to the `GzAssetLoader`, such as `GzAssetLoader<Image,
ImageAssetLoader>`, but this would require registering the asset loader
for every possible decompression target.
Aside from this limitation, nested asset containerisation works as an
end user would expect; if the user registers a `TarAssetLoader`, and a
`GzAssetLoader`, then they can load assets with compound
containerisation, such as `images.tar.gz`.
---
## Changelog
- Added `LoadContext::load_direct_with_reader`
- Added `asset_decompression` example
## Notes
- While I believe my implementation of a Gzip asset loader is
reasonable, I haven't included it as a public feature of `bevy_asset` to
keep the scope of this PR as focussed as possible.
- I have included `flate2` as a `dev-dependency` for the example; it is
not included in the main dependency graph.
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Closes#10319
## Changelog
* Added a new `Color::rgba_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_linear_from_array([f32; 4]) -> Color` method.
* Added a new `Color::rgb_linear_from_array([f32; 3]) -> Color` method.
* Added a new `Color::hsla_from_array([f32; 4]) -> Color` method.
* Added a new `Color::hsl_from_array([f32; 3]) -> Color` method.
* Added a new `Color::lcha_from_array([f32; 4]) -> Color` method.
* Added a new `Color::lch_from_array([f32; 3]) -> Color` method.
* Added a new `Color::rgba_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::rgba_linear_to_vec4(&self) -> Vec4` method.
* Added a new `Color::rgba_linear_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::rgb_linear_to_vec3(&self) -> Vec3` method.
* Added a new `Color::rgb_linear_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::hsla_to_vec4(&self) -> Vec4` method.
* Added a new `Color::hsla_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::hsl_to_vec3(&self) -> Vec3` method.
* Added a new `Color::hsl_to_array(&self) -> [f32; 3]` method.
* Added a new `Color::lcha_to_vec4(&self) -> Vec4` method.
* Added a new `Color::lcha_to_array(&self) -> [f32; 4]` method.
* Added a new `Color::lch_to_vec3(&self) -> Vec3` method.
* Added a new `Color::lch_to_array(&self) -> [f32; 3]` method.
## Migration Guide
`Color::from(Vec4)` is now `Color::rgba_from_array(impl Into<[f32; 4]>)`
`Vec4::from(Color)` is now `Color::rgba_to_vec4(&self)`
Before:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::from(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::from(color_array);
```
After:
```rust
let color_vec4 = Vec4::new(0.5, 0.5, 0.5);
let color_from_vec4 = Color::rgba_from_array(color_vec4);
let color_array = [0.5, 0.5, 0.5];
let color_from_array = Color::rgba_from_array(color_array);
```
# Objective
Close#10504. Improve the development experience for working with scenes
by not requiring the user to specify a matching version of `ron` in
their `Cargo.toml`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
- Add an arrow gizmo as suggested by #9400
## Solution
(excuse my Protomen music)
https://github.com/bevyengine/bevy/assets/14184826/192adf24-079f-4a4b-a17b-091e892974ec
Wasn't horribly hard when i remembered i can change coordinate systems
whenever I want. Gave them four tips (as suggested by @alice-i-cecile in
discord) instead of trying to decide what direction the tips should
point.
Made the tip length default to 1/10 of the arrow's length, which looked
good enough to me. Hard-coded the angle from the body to the tips to 45
degrees.
## Still TODO
- [x] actual doc comments
- [x] doctests
- [x] `ArrowBuilder.with_tip_length()`
---
## Changelog
- Added `gizmos.arrow()` and `gizmos.arrow_2d()`
- Added arrows to `2d_gizmos` and `3d_gizmos` examples
## Migration Guide
N/A
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Ensure ExtendedMaterial can be referenced in bevy_egui_inspector
correctly
## Solution
Add a more manual `TypePath` implementation to work around bugs in the
derive macro.
# Objective
- The example says it will only run on a camera with the
`PostProcessingSettings` component but the node never filters it.
## Solution
- Add the component to the `ViewQuery`
closes: https://github.com/bevyengine/bevy/issues/10541
# Objective
- 2d materials have subtle differences with 3d materials that aren't
obvious to beginners
## Solution
- Add an example that shows how to make a 2d material
# Objective
Fixes#10439
`Timer::percent()` and `Timer::percent_left()` return values in the
range of 0.0 to 1.0, even though their names contain "percent".
These functions should be renamed for clarity.
## Solution
- Rename `Timer::percent()` to `Timer::fraction()`
- Rename `Timer::percent_left()` to `Timer::fraction_remaining()`
---
## Changelog
### Changed
- Renamed `Timer::percent()` to `Timer::fraction()`
- Renamed `Timer::percent_left()` to `Timer::fraction_remaining()`
## Migration Guide
- `Timer::percent()` has been renamed to `Timer::fraction()`
- `Timer::percent_left()` has been renamed to
`Timer::fraction_remaining()`
# Objective
Related to #10472.
Not having a hardcoded scale factor makes comparing results from these
stress tests difficult.
Contributors using high dpi screens may be rendering 4x as many pixels
as others (or more). Stress tests may have different behavior when moved
from one monitor in a dual setup to another. At very high resolutions,
different parts of the engine / hardware are being stressed.
1080p is also a far more common resolution for gaming.
## Solution
Use a consistent 1080p with `scale_factor_override: 1.0` everywhere.
In #9903, this sort of change was added specifically to `bevymark` and
`many_cubes` but it makes sense to do it everywhere.
## Discussion
- Maybe we should have a command line option, environment variable, or
`CI_TESTING_CONFIG` option for 1080p / 1440p / 4k.
- Will these look odd (small text?) when screenshotted and shown in the
example showcase? The aspect ratio is the same, but they will be
downscaled from 1080p instead of ~720p.
- Maybe there are other window properties that should be consistent
across stress tests. e.g. `resizable: false`.
- Should we add a `stress_test_window(title)` helper or something?
- Bevymark (pre-10472) was intentionally 800x600 to match "bunnymark", I
believe. I don't personally think this is very important.
When `cargo doc -Zunstable-options -Zrustdoc-scrape-examples` (trying to
figure out why it doesn't work with bevy), I had the following warnings:
```
warning: unresolved link to `Quad`
--> examples/2d/mesh2d.rs:1:66
|
1 | //! Shows how to render a polygonal [`Mesh`], generated from a [`Quad`] primitive, in a 2D scene.
| ^^^^ no item named `Quad` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "mesh2d") generated 1 warning
warning: unresolved link to `update_weights`
--> examples/animation/morph_targets.rs:6:17
|
6 | //! See the [`update_weights`] system for details.
| ^^^^^^^^^^^^^^ no item named `update_weights` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: public documentation for `morph_targets` links to private item `name_morphs`
--> examples/animation/morph_targets.rs:7:43
|
7 | //! - How to read morph target names in [`name_morphs`].
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `#[warn(rustdoc::private_intra_doc_links)]` on by default
warning: public documentation for `morph_targets` links to private item `setup_animations`
--> examples/animation/morph_targets.rs:8:48
|
8 | //! - How to play morph target animations in [`setup_animations`].
| ^^^^^^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
warning: `bevy` (example "morph_targets") generated 3 warnings
warning: unresolved link to `Quad`
--> examples/2d/mesh2d_vertex_color_texture.rs:1:66
|
1 | //! Shows how to render a polygonal [`Mesh`], generated from a [`Quad`] primitive, in a 2D scene.
| ^^^^ no item named `Quad` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "mesh2d_vertex_color_texture") generated 1 warning
warning: unresolved link to `UIScale`
--> examples/ui/ui_scaling.rs:1:36
|
1 | //! This example illustrates the [`UIScale`] resource from `bevy_ui`.
| ^^^^^^^ no item named `UIScale` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "ui_scaling") generated 1 warning
warning: unresolved link to `dependencies`
--> examples/app/headless.rs:5:6
|
5 | //! [dependencies]
| ^^^^^^^^^^^^ no item named `dependencies` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "headless") generated 1 warning
warning: unresolved link to `Material2d`
--> examples/2d/mesh2d_manual.rs:3:26
|
3 | //! It doesn't use the [`Material2d`] abstraction, but changes the vertex buffer to include verte...
| ^^^^^^^^^^ no item named `Material2d` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default
warning: `bevy` (example "mesh2d_manual") generated 1 warning
```
# Objective
- Changes the default clear color to match the code block color on
Bevy's website.
## Solution
- Changed the clear color, updated text in examples to ensure adequate
contrast. Inconsistent usage of white text color set to use the default
color instead, which is already white.
- Additionally, updated the `3d_scene` example to make it look a bit
better, and use bevy's branding colors.
# Objective
<img width="1920" alt="Screenshot 2023-04-26 at 01 07 34"
src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png">
This PR adds both diffuse and specular light transmission capabilities
to the `StandardMaterial`, with support for screen space refractions.
This enables realistically representing a wide range of real-world
materials, such as:
- Glass; (Including frosted glass)
- Transparent and translucent plastics;
- Various liquids and gels;
- Gemstones;
- Marble;
- Wax;
- Paper;
- Leaves;
- Porcelain.
Unlike existing support for transparency, light transmission does not
rely on fixed function alpha blending, and therefore works with both
`AlphaMode::Opaque` and `AlphaMode::Mask` materials.
## Solution
- Introduces a number of transmission related fields in the
`StandardMaterial`;
- For specular transmission:
- Adds logic to take a view main texture snapshot after the opaque
phase; (in order to perform screen space refractions)
- Introduces a new `Transmissive3d` phase to the renderer, to which all
meshes with `transmission > 0.0` materials are sent.
- Calculates a light exit point (of the approximate mesh volume) using
`ior` and `thickness` properties
- Samples the snapshot texture with an adaptive number of taps across a
`roughness`-controlled radius enabling “blurry” refractions
- For diffuse transmission:
- Approximates transmitted diffuse light by using a second, flipped +
displaced, diffuse-only Lambertian lobe for each light source.
## To Do
- [x] Figure out where `fresnel_mix()` is taking place, if at all, and
where `dielectric_specular` is being calculated, if at all, and update
them to use the `ior` value (Not a blocker, just a nice-to-have for more
correct BSDF)
- To the _best of my knowledge, this is now taking place, after
964340cdd. The fresnel mix is actually "split" into two parts in our
implementation, one `(1 - fresnel(...))` in the transmission, and
`fresnel()` in the light implementations. A surface with more
reflectance now will produce slightly dimmer transmission towards the
grazing angle, as more of the light gets reflected.
- [x] Add `transmission_texture`
- [x] Add `diffuse_transmission_texture`
- [x] Add `thickness_texture`
- [x] Add `attenuation_distance` and `attenuation_color`
- [x] Connect values to glTF loader
- [x] `transmission` and `transmission_texture`
- [x] `thickness` and `thickness_texture`
- [x] `ior`
- [ ] `diffuse_transmission` and `diffuse_transmission_texture` (needs
upstream support in `gltf` crate, not a blocker)
- [x] Add support for multiple screen space refraction “steps”
- [x] Conditionally create no transmission snapshot texture at all if
`steps == 0`
- [x] Conditionally enable/disable screen space refraction transmission
snapshots
- [x] Read from depth pre-pass to prevent refracting pixels in front of
the light exit point
- [x] Use `interleaved_gradient_noise()` function for sampling blur in a
way that benefits from TAA
- [x] Drill down a TAA `#define`, tweak some aspects of the effect
conditionally based on it
- [x] Remove const array that's crashing under HLSL (unless a new `naga`
release with https://github.com/gfx-rs/naga/pull/2496 comes out before
we merge this)
- [ ] Look into alternatives to the `switch` hack for dynamically
indexing the const array (might not be needed, compilers seem to be
decent at expanding it)
- [ ] Add pipeline keys for gating transmission (do we really want/need
this?)
- [x] Tweak some material field/function names?
## A Note on Texture Packing
_This was originally added as a comment to the
`specular_transmission_texture`, `thickness_texture` and
`diffuse_transmission_texture` documentation, I removed it since it was
more confusing than helpful, and will likely be made redundant/will need
to be updated once we have a better infrastructure for preprocessing
assets_
Due to how channels are mapped, you can more efficiently use a single
shared texture image
for configuring the following:
- R - `specular_transmission_texture`
- G - `thickness_texture`
- B - _unused_
- A - `diffuse_transmission_texture`
The `KHR_materials_diffuse_transmission` glTF extension also defines a
`diffuseTransmissionColorTexture`,
that _we don't currently support_. One might choose to pack the
intensity and color textures together,
using RGB for the color and A for the intensity, in which case this
packing advice doesn't really apply.
---
## Changelog
- Added a new `Transmissive3d` render phase for rendering specular
transmissive materials with screen space refractions
- Added rendering support for transmitted environment map light on the
`StandardMaterial` as a fallback for screen space refractions
- Added `diffuse_transmission`, `specular_transmission`, `thickness`,
`ior`, `attenuation_distance` and `attenuation_color` to the
`StandardMaterial`
- Added `diffuse_transmission_texture`, `specular_transmission_texture`,
`thickness_texture` to the `StandardMaterial`, gated behind a new
`pbr_transmission_textures` cargo feature (off by default, for maximum
hardware compatibility)
- Added `Camera3d::screen_space_specular_transmission_steps` for
controlling the number of “layers of transparency” rendered for
transmissive objects
- Added a `TransmittedShadowReceiver` component for enabling shadows in
(diffusely) transmitted light. (disabled by default, as it requires
carefully setting up the `thickness` to avoid self-shadow artifacts)
- Added support for the `KHR_materials_transmission`,
`KHR_materials_ior` and `KHR_materials_volume` glTF extensions
- Renamed items related to temporal jitter for greater consistency
## Migration Guide
- `SsaoPipelineKey::temporal_noise` has been renamed to
`SsaoPipelineKey::temporal_jitter`
- The `TAA` shader def (controlled by the presence of the
`TemporalAntiAliasSettings` component in the camera) has been replaced
with the `TEMPORAL_JITTER` shader def (controlled by the presence of the
`TemporalJitter` component in the camera)
- `MeshPipelineKey::TAA` has been replaced by
`MeshPipelineKey::TEMPORAL_JITTER`
- The `TEMPORAL_NOISE` shader def has been consolidated with
`TEMPORAL_JITTER`
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
# Objective
- Example `deferred_rendering` sometimes fail to render in CI
- Make it easier to render
## Solution
- Reduce the complexity of the sphere used
# Objective
- Fixes#10133
## Solution
- Add a new example that focuses on using `Virtual` time
## Changelog
### Added
- new `virtual_time` example
### Changed
- moved `time` & `timers` examples to the new `examples/time` folder
# Objective
- Build on the changes in https://github.com/bevyengine/bevy/pull/9982
- Use `ImageSamplerDescriptor` as the "public image sampler descriptor"
interface in all places (for consistency)
- Make it possible to configure textures to use the "default" sampler
(as configured in the `DefaultImageSampler` resource)
- Fix a bug introduced in #9982 that prevents configured samplers from
being used in Basis, KTX2, and DDS textures
---
## Migration Guide
- When using the `Image` API, use `ImageSamplerDescriptor` instead of
`wgpu::SamplerDescriptor`
- If writing custom wgpu renderer features that work with `Image`, call
`&image_sampler.as_wgpu()` to convert to a wgpu descriptor.
# Objective
- Reduce noise to allow users to see previous asset changes and other
logs like from asset reloading
- The example file is named differently than the example
## Solution
- Only print the asset content if there are asset events
- Rename the example file to `asset_processing`
# Objective
A follow-up PR for https://github.com/bevyengine/bevy/pull/10221
## Changelog
Replaced usages of texture_descriptor.size with the helper methods of
`Image` through the entire engine codebase
# Objective
- Handle pausing audio when Android app is suspended
## Solution
- This is the start of application lifetime events. They are mostly
useful on mobile
- Next version of winit should add a few more
- When application is suspended, send an event to notify the
application, and run the schedule one last time before actually
suspending the app
- Audio is now suspended too 🎉https://github.com/bevyengine/bevy/assets/8672791/d74e2e09-ee29-4f40-adf2-36a0c064f94e
---------
Co-authored-by: Marco Buono <418473+coreh@users.noreply.github.com>
# Objective
Fog color was passed to shaders without conversion from sRGB to linear
color space. Because shaders expect colors in linear space this resulted
in wrong color being used. This is most noticeable in open scenes with
dark fog color and clear color set to the same color. In such case
background/clear color (which is properly processed) is going to be
darker than very far objects.
Example:
[bevy-fog-color-bug.zip](https://github.com/bevyengine/bevy/files/13063718/bevy-fog-color-bug.zip)
## Solution
Add missing conversion of fog color to linear color space.
---
## Changelog
* Fixed conversion of fog color
## Migration Guide
- Colors in `FogSettings` struct (`color` and `directional_light_color`)
are now sent to the GPU in linear space. If you were using
`Color::rgb()`/`Color::rgba()` and would like to retain the previous
colors, you can quickly fix it by switching to
`Color::rgb_linear()`/`Color::rgba_linear()`.
# Objective
To get the width or height of an image you do:
```rust
self.texture_descriptor.size.{width, height}
```
that is quite verbose.
This PR adds some convenient methods for Image to reduce verbosity.
## Changelog
* Add a `width()` method for getting the width of an image.
* Add a `height()` method for getting the height of an image.
* Rename the `size()` method to `size_f32()`.
* Add a `size()` method for getting the size of an image as u32.
* Renamed the `aspect_2d()` method to `aspect_ratio()`.
## Migration Guide
Replace calls to the `Image::size()` method with `size_f32()`.
Replace calls to the `Image::aspect_2d()` method with `aspect_ratio()`.
# Objective
- Fix#10165
- On iOS simulator on apple silicon Macs, shader validation is going
through the host, but device limits are reported for the device. They
sometimes differ, and cause the validation to crash on something that
should work
```
-[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5775: failed assertion `Draw Errors Validation
Fragment Function(fragment_): the offset into the buffer _naga_oil_mod_MJSXM6K7OBRHEOR2NVSXG2C7OZUWK527MJUW4ZDJNZTXG_memberfog that is bound at buffer index 6 must be a multiple of 256 but was set to 448.
```
## Solution
- Add a custom flag when building for the simulator and override the
buffer alignment
# Objective
Simplify bind group creation code. alternative to (and based on) #9476
## Solution
- Add a `BindGroupEntries` struct that can transparently be used where
`&[BindGroupEntry<'b>]` is required in BindGroupDescriptors.
Allows constructing the descriptor's entries as:
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::with_indexes((
(2, &my_sampler),
(3, my_uniform),
)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 2,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 3,
resource: my_uniform,
},
],
);
```
or
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&BindGroupEntries::sequential((&my_sampler, my_uniform)),
);
```
instead of
```rust
render_device.create_bind_group(
"my_bind_group",
&my_layout,
&[
BindGroupEntry {
binding: 0,
resource: BindingResource::Sampler(&my_sampler),
},
BindGroupEntry {
binding: 1,
resource: my_uniform,
},
],
);
```
the structs has no user facing macros, is tuple-type-based so stack
allocated, and has no noticeable impact on compile time.
- Also adds a `DynamicBindGroupEntries` struct with a similar api that
uses a `Vec` under the hood and allows extending the entries.
- Modifies `RenderDevice::create_bind_group` to take separate arguments
`label`, `layout` and `entries` instead of a `BindGroupDescriptor`
struct. The struct can't be stored due to the internal references, and
with only 3 members arguably does not add enough context to justify
itself.
- Modify the codebase to use the new api and the `BindGroupEntries` /
`DynamicBindGroupEntries` structs where appropriate (whenever the
entries slice contains more than 1 member).
## Migration Guide
- Calls to `RenderDevice::create_bind_group({BindGroupDescriptor {
label, layout, entries })` must be amended to
`RenderDevice::create_bind_group(label, layout, entries)`.
- If `label`s have been specified as `"bind_group_name".into()`, they
need to change to just `"bind_group_name"`. `Some("bind_group_name")`
and `None` will still work, but `Some("bind_group_name")` can optionally
be simplified to just `"bind_group_name"`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
# Objective
Users shouldn't need to change their source code between "development
workflows" and "releasing". Currently, Bevy Asset V2 has two "processed"
asset modes `Processed` (assumes assets are already processed) and
`ProcessedDev` (starts an asset processor and processes assets). This
means that the mode must be changed _in code_ when switching from "app
dev" to "release". Very suboptimal.
We have already removed "runtime opt-in" for hot-reloading. Enabling the
`file_watcher` feature _automatically_ enables file watching in code.
This means deploying a game (without hot reloading enabled) just means
calling `cargo build --release` instead of `cargo run --features
bevy/file_watcher`.
We should adopt this pattern for asset processing.
## Solution
This adds the `asset_processor` feature, which will start the
`AssetProcessor` when an `AssetPlugin` runs in `AssetMode::Processed`.
The "asset processing workflow" is now:
1. Enable `AssetMode::Processed` on `AssetPlugin`
2. When developing, run with the `asset_processor` and `file_watcher`
features
3. When releasing, build without these features.
The `AssetMode::ProcessedDev` mode has been removed.
# Objective
- Make it possible to move the light position around in the
`shadow_biases` example
- Also support resetting the depth/normal biases to the engine defaults,
or zero.
## Solution
- The light position is displayed in the text overlay.
- The light position can be adjusted with
left/right/up/down/pgup/pgdown.
- The depth/normal biases can be reset to defaults by pressing R, or to
zero by pressing Z.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
- Demonstrate the different shadow PCF methods in the `shadow_biases`
example
## Solution
- Cycle through the available methods when pressing the `F` key
- Display which filter method is being used
# Objective
- Fixes#9382
## Solution
- Added a few extra notes in regards to WebGPU experimental state and
the need of enabling unstable APIs through certain attribute flags in
`cargo_features.md` and the examples `README.md` files.
# Objective
allow extending `Material`s (including the built in `StandardMaterial`)
with custom vertex/fragment shaders and additional data, to easily get
pbr lighting with custom modifications, or otherwise extend a base
material.
# Solution
- added `ExtendedMaterial<B: Material, E: MaterialExtension>` which
contains a base material and a user-defined extension.
- added example `extended_material` showing how to use it
- modified AsBindGroup to have "unprepared" functions that return raw
resources / layout entries so that the extended material can combine
them
note: doesn't currently work with array resources, as i can't figure out
how to make the OwnedBindingResource::get_binding() work, as wgpu
requires a `&'a[&'a TextureView]` and i have a `Vec<TextureView>`.
# Migration Guide
manual implementations of `AsBindGroup` will need to be adjusted, the
changes are pretty straightforward and can be seen in the diff for e.g.
the `texture_binding_array` example.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
- We should encourage of the simpler to reason about chain.
## Solution
- Use it in the breakout example
---
## Changelog
- Switch breakout to use `chain` instead of `before` and `after`
# Objective
Current `FixedTime` and `Time` have several problems. This pull aims to
fix many of them at once.
- If there is a longer pause between app updates, time will jump forward
a lot at once and fixed time will iterate on `FixedUpdate` for a large
number of steps. If the pause is merely seconds, then this will just
mean jerkiness and possible unexpected behaviour in gameplay. If the
pause is hours/days as with OS suspend, the game will appear to freeze
until it has caught up with real time.
- If calculating a fixed step takes longer than specified fixed step
period, the game will enter a death spiral where rendering each frame
takes longer and longer due to more and more fixed step updates being
run per frame and the game appears to freeze.
- There is no way to see current fixed step elapsed time inside fixed
steps. In order to track this, the game designer needs to add a custom
system inside `FixedUpdate` that calculates elapsed or step count in a
resource.
- Access to delta time inside fixed step is `FixedStep::period` rather
than `Time::delta`. This, coupled with the issue that `Time::elapsed`
isn't available at all for fixed steps, makes it that time requiring
systems are either implemented to be run in `FixedUpdate` or `Update`,
but rarely work in both.
- Fixes#8800
- Fixes#8543
- Fixes#7439
- Fixes#5692
## Solution
- Create a generic `Time<T>` clock that has no processing logic but
which can be instantiated for multiple usages. This is also exposed for
users to add custom clocks.
- Create three standard clocks, `Time<Real>`, `Time<Virtual>` and
`Time<Fixed>`, all of which contain their individual logic.
- Create one "default" clock, which is just `Time` (or `Time<()>`),
which will be overwritten from `Time<Virtual>` on each update, and
`Time<Fixed>` inside `FixedUpdate` schedule. This way systems that do
not care specifically which time they track can work both in `Update`
and `FixedUpdate` without changes and the behaviour is intuitive.
- Add `max_delta` to virtual time update, which limits how much can be
added to virtual time by a single update. This fixes both the behaviour
after a long freeze, and also the death spiral by limiting how many
fixed timestep iterations there can be per update. Possible future work
could be adding `max_accumulator` to add a sort of "leaky bucket" time
processing to possibly smooth out jumps in time while keeping frame rate
stable.
- Many minor tweaks and clarifications to the time functions and their
documentation.
## Changelog
- `Time::raw_delta()`, `Time::raw_elapsed()` and related methods are
moved to `Time<Real>::delta()` and `Time<Real>::elapsed()` and now match
`Time` API
- `FixedTime` is now `Time<Fixed>` and matches `Time` API.
- `Time<Fixed>` default timestep is now 64 Hz, or 15625 microseconds.
- `Time` inside `FixedUpdate` now reflects fixed timestep time, making
systems portable between `Update ` and `FixedUpdate`.
- `Time::pause()`, `Time::set_relative_speed()` and related methods must
now be called as `Time<Virtual>::pause()` etc.
- There is a new `max_delta` setting in `Time<Virtual>` that limits how
much the clock can jump by a single update. The default value is 0.25
seconds.
- Removed `on_fixed_timer()` condition as `on_timer()` does the right
thing inside `FixedUpdate` now.
## Migration Guide
- Change all `Res<Time>` instances that access `raw_delta()`,
`raw_elapsed()` and related methods to `Res<Time<Real>>` and `delta()`,
`elapsed()`, etc.
- Change access to `period` from `Res<FixedTime>` to `Res<Time<Fixed>>`
and use `delta()`.
- The default timestep has been changed from 60 Hz to 64 Hz. If you wish
to restore the old behaviour, use
`app.insert_resource(Time::<Fixed>::from_hz(60.0))`.
- Change `app.insert_resource(FixedTime::new(duration))` to
`app.insert_resource(Time::<Fixed>::from_duration(duration))`
- Change `app.insert_resource(FixedTime::new_from_secs(secs))` to
`app.insert_resource(Time::<Fixed>::from_seconds(secs))`
- Change `system.on_fixed_timer(duration)` to
`system.on_timer(duration)`. Timers in systems placed in `FixedUpdate`
schedule automatically use the fixed time clock.
- Change `ResMut<Time>` calls to `pause()`, `is_paused()`,
`set_relative_speed()` and related methods to `ResMut<Time<Virtual>>`
calls. The API is the same, with the exception that `relative_speed()`
will return the actual last ste relative speed, while
`effective_relative_speed()` returns 0.0 if the time is paused and
corresponds to the speed that was set when the update for the current
frame started.
## Todo
- [x] Update pull name and description
- [x] Top level documentation on usage
- [x] Fix examples
- [x] Decide on default `max_delta` value
- [x] Decide naming of the three clocks: is `Real`, `Virtual`, `Fixed`
good?
- [x] Decide if the three clock inner structures should be in prelude
- [x] Decide on best way to configure values at startup: is manually
inserting a new clock instance okay, or should there be config struct
separately?
- [x] Fix links in docs
- [x] Decide what should be public and what not
- [x] Decide how `wrap_period` should be handled when it is changed
- [x] ~~Add toggles to disable setting the clock as default?~~ No,
separate pull if needed.
- [x] Add tests
- [x] Reformat, ensure adheres to conventions etc.
- [x] Build documentation and see that it looks correct
## Contributors
Huge thanks to @alice-i-cecile and @maniwani while building this pull.
It was a shared effort!
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Cameron <51241057+maniwani@users.noreply.github.com>
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
This adds support for **Multiple Asset Sources**. You can now register a
named `AssetSource`, which you can load assets from like you normally
would:
```rust
let shader: Handle<Shader> = asset_server.load("custom_source://path/to/shader.wgsl");
```
Notice that `AssetPath` now supports `some_source://` syntax. This can
now be accessed through the `asset_path.source()` accessor.
Asset source names _are not required_. If one is not specified, the
default asset source will be used:
```rust
let shader: Handle<Shader> = asset_server.load("path/to/shader.wgsl");
```
The behavior of the default asset source has not changed. Ex: the
`assets` folder is still the default.
As referenced in #9714
## Why?
**Multiple Asset Sources** enables a number of often-asked-for
scenarios:
* **Loading some assets from other locations on disk**: you could create
a `config` asset source that reads from the OS-default config folder
(not implemented in this PR)
* **Loading some assets from a remote server**: you could register a new
`remote` asset source that reads some assets from a remote http server
(not implemented in this PR)
* **Improved "Binary Embedded" Assets**: we can use this system for
"embedded-in-binary assets", which allows us to replace the old
`load_internal_asset!` approach, which couldn't support asset
processing, didn't support hot-reloading _well_, and didn't make
embedded assets accessible to the `AssetServer` (implemented in this pr)
## Adding New Asset Sources
An `AssetSource` is "just" a collection of `AssetReader`, `AssetWriter`,
and `AssetWatcher` entries. You can configure new asset sources like
this:
```rust
app.register_asset_source(
"other",
AssetSource::build()
.with_reader(|| Box::new(FileAssetReader::new("other")))
)
)
```
Note that `AssetSource` construction _must_ be repeatable, which is why
a closure is accepted.
`AssetSourceBuilder` supports `with_reader`, `with_writer`,
`with_watcher`, `with_processed_reader`, `with_processed_writer`, and
`with_processed_watcher`.
Note that the "asset source" system replaces the old "asset providers"
system.
## Processing Multiple Sources
The `AssetProcessor` now supports multiple asset sources! Processed
assets can refer to assets in other sources and everything "just works".
Each `AssetSource` defines an unprocessed and processed `AssetReader` /
`AssetWriter`.
Currently this is all or nothing for a given `AssetSource`. A given
source is either processed or it is not. Later we might want to add
support for "lazy asset processing", where an `AssetSource` (such as a
remote server) can be configured to only process assets that are
directly referenced by local assets (in order to save local disk space
and avoid doing extra work).
## A new `AssetSource`: `embedded`
One of the big features motivating **Multiple Asset Sources** was
improving our "embedded-in-binary" asset loading. To prove out the
**Multiple Asset Sources** implementation, I chose to build a new
`embedded` `AssetSource`, which replaces the old `load_interal_asset!`
system.
The old `load_internal_asset!` approach had a number of issues:
* The `AssetServer` was not aware of (or capable of loading) internal
assets.
* Because internal assets weren't visible to the `AssetServer`, they
could not be processed (or used by assets that are processed). This
would prevent things "preprocessing shaders that depend on built in Bevy
shaders", which is something we desperately need to start doing.
* Each "internal asset" needed a UUID to be defined in-code to reference
it. This was very manual and toilsome.
The new `embedded` `AssetSource` enables the following pattern:
```rust
// Called in `crates/bevy_pbr/src/render/mesh.rs`
embedded_asset!(app, "mesh.wgsl");
// later in the app
let shader: Handle<Shader> = asset_server.load("embedded://bevy_pbr/render/mesh.wgsl");
```
Notice that this always treats the crate name as the "root path", and it
trims out the `src` path for brevity. This is generally predictable, but
if you need to debug you can use the new `embedded_path!` macro to get a
`PathBuf` that matches the one used by `embedded_asset`.
You can also reference embedded assets in arbitrary assets, such as WGSL
shaders:
```rust
#import "embedded://bevy_pbr/render/mesh.wgsl"
```
This also makes `embedded` assets go through the "normal" asset
lifecycle. They are only loaded when they are actually used!
We are also discussing implicitly converting asset paths to/from shader
modules, so in the future (not in this PR) you might be able to load it
like this:
```rust
#import bevy_pbr::render::mesh::Vertex
```
Compare that to the old system!
```rust
pub const MESH_SHADER_HANDLE: Handle<Shader> = Handle::weak_from_u128(3252377289100772450);
load_internal_asset!(app, MESH_SHADER_HANDLE, "mesh.wgsl", Shader::from_wgsl);
// The mesh asset is the _only_ accessible via MESH_SHADER_HANDLE and _cannot_ be loaded via the AssetServer.
```
## Hot Reloading `embedded`
You can enable `embedded` hot reloading by enabling the
`embedded_watcher` cargo feature:
```
cargo run --features=embedded_watcher
```
## Improved Hot Reloading Workflow
First: the `filesystem_watcher` cargo feature has been renamed to
`file_watcher` for brevity (and to match the `FileAssetReader` naming
convention).
More importantly, hot asset reloading is no longer configured in-code by
default. If you enable any asset watcher feature (such as `file_watcher`
or `rust_source_watcher`), asset watching will be automatically enabled.
This removes the need to _also_ enable hot reloading in your app code.
That means you can replace this:
```rust
app.add_plugins(DefaultPlugins.set(AssetPlugin::default().watch_for_changes()))
```
with this:
```rust
app.add_plugins(DefaultPlugins)
```
If you want to hot reload assets in your app during development, just
run your app like this:
```
cargo run --features=file_watcher
```
This means you can use the same code for development and deployment! To
deploy an app, just don't include the watcher feature
```
cargo build --release
```
My intent is to move to this approach for pretty much all dev workflows.
In a future PR I would like to replace `AssetMode::ProcessedDev` with a
`runtime-processor` cargo feature. We could then group all common "dev"
cargo features under a single `dev` feature:
```sh
# this would enable file_watcher, embedded_watcher, runtime-processor, and more
cargo run --features=dev
```
## AssetMode
`AssetPlugin::Unprocessed`, `AssetPlugin::Processed`, and
`AssetPlugin::ProcessedDev` have been replaced with an `AssetMode` field
on `AssetPlugin`.
```rust
// before
app.add_plugins(DefaultPlugins.set(AssetPlugin::Processed { /* fields here */ })
// after
app.add_plugins(DefaultPlugins.set(AssetPlugin { mode: AssetMode::Processed, ..default() })
```
This aligns `AssetPlugin` with our other struct-like plugins. The old
"source" and "destination" `AssetProvider` fields in the enum variants
have been replaced by the "asset source" system. You no longer need to
configure the AssetPlugin to "point" to custom asset providers.
## AssetServerMode
To improve the implementation of **Multiple Asset Sources**,
`AssetServer` was made aware of whether or not it is using "processed"
or "unprocessed" assets. You can check that like this:
```rust
if asset_server.mode() == AssetServerMode::Processed {
/* do something */
}
```
Note that this refactor should also prepare the way for building "one to
many processed output files", as it makes the server aware of whether it
is loading from processed or unprocessed sources. Meaning we can store
and read processed and unprocessed assets differently!
## AssetPath can now refer to folders
The "file only" restriction has been removed from `AssetPath`. The
`AssetServer::load_folder` API now accepts an `AssetPath` instead of a
`Path`, meaning you can load folders from other asset sources!
## Improved AssetPath Parsing
AssetPath parsing was reworked to support sources, improve error
messages, and to enable parsing with a single pass over the string.
`AssetPath::new` was replaced by `AssetPath::parse` and
`AssetPath::try_parse`.
## AssetWatcher broken out from AssetReader
`AssetReader` is no longer responsible for constructing `AssetWatcher`.
This has been moved to `AssetSourceBuilder`.
## Duplicate Event Debouncing
Asset V2 already debounced duplicate filesystem events, but this was
_input_ events. Multiple input event types can produce the same _output_
`AssetSourceEvent`. Now that we have `embedded_watcher`, which does
expensive file io on events, it made sense to debounce output events
too, so I added that! This will also benefit the AssetProcessor by
preventing integrity checks for duplicate events (and helps keep the
noise down in trace logs).
## Next Steps
* **Port Built-in Shaders**: Currently the primary (and essentially
only) user of `load_interal_asset` in Bevy's source code is "built-in
shaders". I chose not to do that in this PR for a few reasons:
1. We need to add the ability to pass shader defs in to shaders via meta
files. Some shaders (such as MESH_VIEW_TYPES) need to pass shader def
values in that are defined in code.
2. We need to revisit the current shader module naming system. I think
we _probably_ want to imply modules from source structure (at least by
default). Ideally in a way that can losslessly convert asset paths
to/from shader modules (to enable the asset system to resolve modules
using the asset server).
3. I want to keep this change set minimal / get this merged first.
* **Deprecate `load_internal_asset`**: we can't do that until we do (1)
and (2)
* **Relative Asset Paths**: This PR significantly increases the need for
relative asset paths (which was already pretty high). Currently when
loading dependencies, it is assumed to be an absolute path, which means
if in an `AssetLoader` you call `context.load("some/path/image.png")` it
will assume that is the "default" asset source, _even if the current
asset is in a different asset source_. This will cause breakage for
AssetLoaders that are not designed to add the current source to whatever
paths are being used. AssetLoaders should generally not need to be aware
of the name of their current asset source, or need to think about the
"current asset source" generally. We should build apis that support
relative asset paths and then encourage using relative paths as much as
possible (both via api design and docs). Relative paths are also
important because they will allow developers to move folders around
(even across providers) without reprocessing, provided there is no path
breakage.
# Objective
- Add a [Deferred
Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy.
- This allows subsequent passes to access per pixel material information
before/during shading.
- Accessing this per pixel material information is needed for some
features, like GI. It also makes other features (ex. Decals) simpler to
implement and/or improves their capability. There are multiple
approaches to accomplishing this. The deferred shading approach works
well given the limitations of WebGPU and WebGL2.
Motivation: [I'm working on a GI solution for
Bevy](https://youtu.be/eH1AkL-mwhI)
# Solution
- The deferred renderer is implemented with a prepass and a deferred
lighting pass.
- The prepass renders opaque objects into the Gbuffer attachment
(`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same
way as the forward implementation and then [packs it into the
Gbuffer](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L168)).
- The deferred lighting pass unpacks the `PbrInput` and [feeds it into
the pbr()
function](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L65)),
then outputs the shaded color data.
- There is now a resource
[DefaultOpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L599))
that can be used to set the default render method for opaque materials.
If materials return `None` from
[opaque_render_method()](ec1465559f/crates/bevy_pbr/src/material.rs (L131))
the `DefaultOpaqueRendererMethod` will be used. Otherwise, custom
materials can also explicitly choose to only support Deferred or Forward
by returning the respective
[OpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L603))
- Deferred materials can be used seamlessly along with both opaque and
transparent forward rendered materials in the same scene. The [deferred
rendering
example](https://github.com/DGriffin91/bevy/blob/deferred/examples/3d/deferred_rendering.rs)
does this.
- The deferred renderer does not support MSAA. If any deferred materials
are used, MSAA must be disabled. Both TAA and FXAA are supported.
- Deferred rendering supports WebGL2/WebGPU.
## Custom deferred materials
- Custom materials can support both deferred and forward at the same
time. The
[StandardMaterial](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L166))
does this. So does [this
example](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56).
- Custom deferred materials that require PBR lighting can create a
`PbrInput`, write it to the deferred GBuffer and let it be rendered by
the `PBRDeferredLightingPlugin`.
- Custom deferred materials that require custom lighting have two
options:
1. Use the base_color channel of the `PbrInput` combined with the
`STANDARD_MATERIAL_FLAGS_UNLIT_BIT` flag.
[Example.](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56)
(If the unlit bit is set, the base_color is stored as RGB9E5 for extra
precision)
2. A Custom Deferred Lighting pass can be created, either overriding the
default, or running in addition. The a depth buffer is used to limit
rendering to only the required fragments for each deferred lighting
pass. Materials can set their respective depth id via the
[deferred_lighting_pass_id](b79182d2a3/crates/bevy_pbr/src/prepass/prepass_io.wgsl (L95))
attachment. The custom deferred lighting pass plugin can then set [its
corresponding
depth](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L37)).
Then with the lighting pass using
[CompareFunction::Equal](ec1465559f/crates/bevy_pbr/src/deferred/mod.rs (L335)),
only the fragments with a depth that equal the corresponding depth
written in the material will be rendered.
Custom deferred lighting plugins can also be created to render the
StandardMaterial. The default deferred lighting plugin can be bypassed
with `DefaultPlugins.set(PBRDeferredLightingPlugin { bypass: true })`
---------
Co-authored-by: nickrart <nickolas.g.russell@gmail.com>
# Objective
- Use the `Material` abstraction for the Wireframes
- Right now this doesn't have many benefits other than simplifying some
of the rendering code
- We can reuse the default vertex shader and avoid rendering
inconsistencies
- The goal is to have a material with a color on each mesh so this
approach will make it easier to implement
- Originally done in https://github.com/bevyengine/bevy/pull/5303 but I
decided to split the Material part to it's own PR and then adding
per-entity colors and globally configurable colors will be a much
simpler diff.
## Solution
- Use the new `Material` abstraction for the Wireframes
## Notes
It's possible this isn't ideal since this adds a
`Handle<WireframeMaterial>` to all the meshes compared to the original
approach that didn't need anything. I didn't notice any performance
impact on my machine.
This might be a surprising usage of `Material` at first, because
intuitively you only have one material per mesh, but the way it's
implemented you can have as many different types of materials as you
want on a mesh.
## Migration Guide
`WireframePipeline` was removed. If you were using it directly, please
create an issue explaining your use case.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- All foxes in `many_foxes` are running in sync
- It's scary
- It can also be a source of optimisation that won't be useful in a
general case
## Solution
- Advance the animation of each fox so that they are not synced anymore
by default
- Add a cli arg to enable them running in sync
# Objective
- This PR aims to make creating meshes a little bit more ergonomic,
specifically by removing the need for intermediate mutable variables.
## Solution
- We add methods that consume the `Mesh` and return a mesh with the
specified changes, so that meshes can be entirely constructed via
builder-style calls, without intermediate variables;
- Methods are flagged with `#[must_use]` to ensure proper use;
- Examples are updated to use the new methods where applicable. Some
examples are kept with the mutating methods so that users can still
easily discover them, and also where the new methods wouldn't really be
an improvement.
## Examples
Before:
```rust
let mut mesh = Mesh::new(PrimitiveTopology::TriangleList);
mesh.insert_attribute(Mesh::ATTRIBUTE_POSITION, vs);
mesh.insert_attribute(Mesh::ATTRIBUTE_NORMAL, vns);
mesh.insert_attribute(Mesh::ATTRIBUTE_UV_0, vts);
mesh.set_indices(Some(Indices::U32(tris)));
mesh
```
After:
```rust
Mesh::new(PrimitiveTopology::TriangleList)
.with_inserted_attribute(Mesh::ATTRIBUTE_POSITION, vs)
.with_inserted_attribute(Mesh::ATTRIBUTE_NORMAL, vns)
.with_inserted_attribute(Mesh::ATTRIBUTE_UV_0, vts)
.with_indices(Some(Indices::U32(tris)))
```
Before:
```rust
let mut cube = Mesh::from(shape::Cube { size: 1.0 });
cube.generate_tangents().unwrap();
PbrBundle {
mesh: meshes.add(cube),
..default()
}
```
After:
```rust
PbrBundle {
mesh: meshes.add(
Mesh::from(shape::Cube { size: 1.0 })
.with_generated_tangents()
.unwrap(),
),
..default()
}
```
---
## Changelog
- Added consuming builder methods for more ergonomic `Mesh` creation:
`with_inserted_attribute()`, `with_removed_attribute()`,
`with_indices()`, `with_duplicated_vertices()`,
`with_computed_flat_normals()`, `with_generated_tangents()`,
`with_morph_targets()`, `with_morph_target_names()`.
# Objective
Spatial audio was heroically thrown together at the last minute for Bevy
0.10, but right now it's a bit of a pain to use -- users need to
manually update audio sinks with the position of the listener / emitter.
Hopefully the migration guide entry speaks for itself.
## Solution
Add a new `SpatialListener` component and automatically update sinks
with the position of the listener and and emitter.
## Changelog
`SpatialAudioSink`s are now automatically updated with positions of
emitters and listeners.
## Migration Guide
Spatial audio now automatically uses the transform of the `AudioBundle`
and of an entity with a `SpatialListener` component.
If you were manually scaling emitter/listener positions, you can use the
`spatial_scale` field of `AudioPlugin` instead.
```rust
// Old
commands.spawn(
SpatialAudioBundle {
source: asset_server.load("sounds/Windless Slopes.ogg"),
settings: PlaybackSettings::LOOP,
spatial: SpatialSettings::new(listener_position, gap, emitter_position),
},
);
fn update(
emitter_query: Query<(&Transform, &SpatialAudioSink)>,
listener_query: Query<&Transform, With<Listener>>,
) {
let listener = listener_query.single();
for (transform, sink) in &emitter_query {
sink.set_emitter_position(transform.translation);
sink.set_listener_position(*listener, gap);
}
}
// New
commands.spawn((
SpatialBundle::from_transform(Transform::from_translation(emitter_position)),
AudioBundle {
source: asset_server.load("sounds/Windless Slopes.ogg"),
settings: PlaybackSettings::LOOP.with_spatial(true),
},
));
commands.spawn((
SpatialBundle::from_transform(Transform::from_translation(listener_position)),
SpatialListener::new(gap),
));
```
## Discussion
I removed `SpatialAudioBundle` because the `SpatialSettings` component
was made mostly redundant, and without that it was identical to
`AudioBundle`.
`SpatialListener` is a bare component and not a bundle which is feeling
like a maybe a strange choice. That happened from a natural aversion
both to nested bundles and to duplicating `Transform` etc in bundles and
from figuring that it is likely to just be tacked on to some other
bundle (player, head, camera) most of the time.
Let me know what you think about these things / everything else.
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- Followup to #7184.
- ~Deprecate `TypeUuid` and remove its internal references.~ No longer
part of this PR.
- Use `TypePath` for the type registry, and (de)serialisation instead of
`std::any::type_name`.
- Allow accessing type path information behind proxies.
## Solution
- Introduce methods on `TypeInfo` and friends for dynamically querying
type path. These methods supersede the old `type_name` methods.
- Remove `Reflect::type_name` in favor of `DynamicTypePath::type_path`
and `TypeInfo::type_path_table`.
- Switch all uses of `std::any::type_name` in reflection, non-debugging
contexts to use `TypePath`.
---
## Changelog
- Added `TypePathTable` for dynamically accessing methods on `TypePath`
through `TypeInfo` and the type registry.
- Removed `type_name` from all `TypeInfo`-like structs.
- Added `type_path` and `type_path_table` methods to all `TypeInfo`-like
structs.
- Removed `Reflect::type_name` in favor of
`DynamicTypePath::reflect_type_path` and `TypeInfo::type_path`.
- Changed the signature of all `DynamicTypePath` methods to return
strings with a static lifetime.
## Migration Guide
- Rely on `TypePath` instead of `std::any::type_name` for all stability
guarantees and for use in all reflection contexts, this is used through
with one of the following APIs:
- `TypePath::type_path` if you have a concrete type and not a value.
- `DynamicTypePath::reflect_type_path` if you have an `dyn Reflect`
value without a concrete type.
- `TypeInfo::type_path` for use through the registry or if you want to
work with the represented type of a `DynamicFoo`.
- Remove `type_name` from manual `Reflect` implementations.
- Use `type_path` and `type_path_table` in place of `type_name` on
`TypeInfo`-like structs.
- Use `get_with_type_path(_mut)` over `get_with_type_name(_mut)`.
## Note to reviewers
I think if anything we were a little overzealous in merging #7184 and we
should take that extra care here.
In my mind, this is the "point of no return" for `TypePath` and while I
think we all agree on the design, we should carefully consider if the
finer details and current implementations are actually how we want them
moving forward.
For example [this incorrect `TypePath` implementation for
`String`](3fea3c6c0b/crates/bevy_reflect/src/impls/std.rs (L90))
(note that `String` is in the default Rust prelude) snuck in completely
under the radar.
# Objective
- Make sure that users can "just run" the mobile example
- Device descriptions like `iPhone SE (3rd generation)
(F647334F-D7C1-4BD6-9B5F-0E3D9713C02B) (Shutdown)` currently fail
([issue
found](https://github.com/NiklasEi/bevy_game_template/pull/61#discussion_r1269747507)
by @CleanCut)
## Solution
- Improve the script that grabs the device UUID from the device list
# Objective
- After https://github.com/bevyengine/bevy/pull/9903, example
`mesh2d_manual` doesn't render anything
## Solution
- Fix the example using the new `RenderMesh2dInstances`
# Objective
- Fixes#8140
## Solution
- Added Explicit Error Typing for `AssetLoader` and `AssetSaver`, which
were the last instances of `anyhow` in use across Bevy.
---
## Changelog
- Added an associated type `Error` to `AssetLoader` and `AssetSaver` for
use with the `load` and `save` methods respectively.
- Changed `ErasedAssetLoader` and `ErasedAssetSaver` `load` and `save`
methods to use `Box<dyn Error + Send + Sync + 'static>` to allow for
arbitrary `Error` types from the non-erased trait variants. Note the
strict requirements match the pre-existing requirements around
`anyhow::Error`.
## Migration Guide
- `anyhow` is no longer exported by `bevy_asset`; Add it to your own
project (if required).
- `AssetLoader` and `AssetSaver` have an associated type `Error`; Define
an appropriate error type (e.g., using `thiserror`), or use a pre-made
error type (e.g., `anyhow::Error`). Note that using `anyhow::Error` is a
drop-in replacement.
- `AssetLoaderError` has been removed; Define a new error type, or use
an alternative (e.g., `anyhow::Error`)
- All the first-party `AssetLoader`'s and `AssetSaver`'s now return
relevant (and narrow) error types instead of a single ambiguous type;
Match over the specific error type, or encapsulate (`Box<dyn>`,
`thiserror`, `anyhow`, etc.)
## Notes
A simpler PR to resolve this issue would simply define a Bevy `Error`
type defined as `Box<dyn std::error::Error + Send + Sync + 'static>`,
but I think this type of error handling should be discouraged when
possible. Since only 2 traits required the use of `anyhow`, it isn't a
substantive body of work to solidify these error types, and remove
`anyhow` entirely. End users are still encouraged to use `anyhow` if
that is their preferred error handling style. Arguably, adding the
`Error` associated type gives more freedom to end-users to decide
whether they want more or less explicit error handling (`anyhow` vs
`thiserror`).
As an aside, I didn't perform any testing on Android or WASM. CI passed
locally, but there may be mistakes for those platforms I missed.
# Objective
https://github.com/bevyengine/bevy/pull/7328 introduced an API to
override the global wireframe config. I believe it is flawed for a few
reasons.
This PR uses a non-breaking API. Instead of making the `Wireframe` an
enum I introduced the `NeverRenderWireframe` component. Here's the
reason why I think this is better:
- Easier to migrate since it doesn't change the old behaviour.
Essentially nothing to migrate. Right now this PR is a breaking change
but I don't think it has to be.
- It's similar to other "per mesh" rendering features like
NotShadowCaster/NotShadowReceiver
- It doesn't force new users to also think about global vs not global if
all they want is to render a wireframe
- This would also let you filter at the query definition level instead
of filtering when running the query
## Solution
- Introduce a `NeverRenderWireframe` component that ignores the global
config
---
## Changelog
- Added a `NeverRenderWireframe` component that ignores the global
`WireframeConfig`
# Objective
Add support for drawing outlines outside the borders of UI nodes.
## Solution
Add a new `Outline` component with `width`, `offset` and `color` fields.
Added `outline_width` and `outline_offset` fields to `Node`. This is set
after layout recomputation by the `resolve_outlines_system`.
Properties of outlines:
* Unlike borders, outlines have to be the same width on each edge.
* Outlines do not occupy any space in the layout.
* The `Outline` component won't be added to any of the UI node bundles,
it needs to be inserted separately.
* Outlines are drawn outside the node's border, so they are clipped
using the clipping rect of their entity's parent UI node (if it exists).
* `Val::Percent` outline widths are resolved based on the width of the
outlined UI node.
* The offset of the `Outline` adds space between an outline and the edge
of its node.
I was leaning towards adding an `outline` field to `Style` but a
separate component seems more efficient for queries and change
detection. The `Outline` component isn't added to bundles for the same
reason.
---
## Examples
* This image is from the `borders` example from the Bevy UI examples but
modified to include outlines. The UI nodes are the dark red rectangles,
the bright red rectangles are borders and the white lines offset from
each node are the outlines. The yellow rectangles are separate nodes
contained with the dark red nodes:
<img width="406" alt="outlines"
src="https://github.com/bevyengine/bevy/assets/27962798/4e6f315a-019f-42a4-94ee-cca8e684d64a">
* This is from the same example but using a branch that implements
border-radius. Here the the outlines are in orange and there is no
offset applied. I broke the borders implementation somehow during the
merge, which is why some of the borders from the first screenshot are
missing 😅. The outlines work nicely though (as long as you
can forgive the lack of anti-aliasing):
---
## Notes
As I explained above, I don't think the `Outline` component should be
added to UI node bundles. We can have helper functions though, perhaps
something as simple as:
```rust
impl NodeBundle {
pub fn with_outline(self, outline: Outline) -> (Self, Outline) {
(self, outline)
}
}
```
I didn't include anything like this as I wanted to keep the PR's scope
as narrow as possible. Maybe `with_outline` should be in a trait that we
implement for each UI node bundle.
---
## Changelog
Added support for outlines to Bevy UI.
* The `Outline` component adds an outline to a UI node.
* The `outline_width` field added to `Node` holds the resolved width of
the outline, which is set by the `resolve_outlines_system` after layout
recomputation.
* Outlines are drawn by the system `extract_uinode_outlines`.
# Objective
Fix warnings:
- #[warn(clippy::needless_pass_by_ref_mut)]
- #[warn(elided_lifetimes_in_associated_constant)]
## Solution
- Remove mut
- add &'static
## Errors
```rust
warning: this argument is a mutable reference, but not used mutably
--> crates/bevy_hierarchy/src/child_builder.rs:672:31
|
672 | fn assert_children(world: &mut World, parent: Entity, children: Option<&[Entity]>) {
| ^^^^^^^^^^ help: consider changing to: `&World`
|
= note: this is cfg-gated and may require further changes
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
= note: `#[warn(clippy::needless_pass_by_ref_mut)]` on by default
```
```rust
warning: `&` without an explicit lifetime name cannot be used here
--> examples/shader/post_processing.rs:120:21
|
120 | pub const NAME: &str = "post_process";
| ^
|
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #115010 <https://github.com/rust-lang/rust/issues/115010>
= note: `#[warn(elided_lifetimes_in_associated_constant)]` on by default
help: use the `'static` lifetime
|
120 | pub const NAME: &'static str = "post_process";
| +++++++
```
# Objective
Allow the user to choose between "Add wireframes to these specific
entities" or "Add wireframes to everything _except_ these specific
entities".
Fixes#7309
# Solution
Make the `Wireframe` component act like an override to the global
configuration.
Having `global` set to `false`, and adding a `Wireframe` with `enable:
true` acts exactly as before.
But now the opposite is also possible: Set `global` to `true` and add a
`Wireframe` with `enable: false` will draw wireframes for everything
_except_ that entity.
Updated the example to show how overriding the global config works.
# Objective
- See fewer warnings when running `cargo clippy` locally.
## Solution
- allow `clippy::type_complexity` in more places, which also signals to
users they should do the same.
# Objective
- There were a few typos in the project.
- This PR fixes these typos.
## Solution
- Fixing the typos.
Signed-off-by: SADIK KUZU <sadikkuzu@hotmail.com>
# Objective
- Improve rendering performance, particularly by avoiding the large
system commands costs of using the ECS in the way that the render world
does.
## Solution
- Define `EntityHasher` that calculates a hash from the
`Entity.to_bits()` by `i | (i.wrapping_mul(0x517cc1b727220a95) << 32)`.
`0x517cc1b727220a95` is something like `u64::MAX / N` for N that gives a
value close to π and that works well for hashing. Thanks for @SkiFire13
for the suggestion and to @nicopap for alternative suggestions and
discussion. This approach comes from `rustc-hash` (a.k.a. `FxHasher`)
with some tweaks for the case of hashing an `Entity`. `FxHasher` and
`SeaHasher` were also tested but were significantly slower.
- Define `EntityHashMap` type that uses the `EntityHashser`
- Use `EntityHashMap<Entity, T>` for render world entity storage,
including:
- `RenderMaterialInstances` - contains the `AssetId<M>` of the material
associated with the entity. Also for 2D.
- `RenderMeshInstances` - contains mesh transforms, flags and properties
about mesh entities. Also for 2D.
- `SkinIndices` and `MorphIndices` - contains the skin and morph index
for an entity, respectively
- `ExtractedSprites`
- `ExtractedUiNodes`
## Benchmarks
All benchmarks have been conducted on an M1 Max connected to AC power.
The tests are run for 1500 frames. The 1000th frame is captured for
comparison to check for visual regressions. There were none.
### 2D Meshes
`bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d`
#### `--ordered-z`
This test spawns the 2D meshes with z incrementing back to front, which
is the ideal arrangement allocation order as it matches the sorted
render order which means lookups have a high cache hit rate.
<img width="1112" alt="Screenshot 2023-09-27 at 07 50 45"
src="https://github.com/bevyengine/bevy/assets/302146/e140bc98-7091-4a3b-8ae1-ab75d16d2ccb">
-39.1% median frame time.
#### Random
This test spawns the 2D meshes with random z. This not only makes the
batching and transparent 2D pass lookups get a lot of cache misses, it
also currently means that the meshes are almost certain to not be
batchable.
<img width="1108" alt="Screenshot 2023-09-27 at 07 51 28"
src="https://github.com/bevyengine/bevy/assets/302146/29c2e813-645a-43ce-982a-55df4bf7d8c4">
-7.2% median frame time.
### 3D Meshes
`many_cubes --benchmark`
<img width="1112" alt="Screenshot 2023-09-27 at 07 51 57"
src="https://github.com/bevyengine/bevy/assets/302146/1a729673-3254-4e2a-9072-55e27c69f0fc">
-7.7% median frame time.
### Sprites
**NOTE: On `main` sprites are using `SparseSet<Entity, T>`!**
`bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite`
#### `--ordered-z`
This test spawns the sprites with z incrementing back to front, which is
the ideal arrangement allocation order as it matches the sorted render
order which means lookups have a high cache hit rate.
<img width="1116" alt="Screenshot 2023-09-27 at 07 52 31"
src="https://github.com/bevyengine/bevy/assets/302146/bc8eab90-e375-4d31-b5cd-f55f6f59ab67">
+13.0% median frame time.
#### Random
This test spawns the sprites with random z. This makes the batching and
transparent 2D pass lookups get a lot of cache misses.
<img width="1109" alt="Screenshot 2023-09-27 at 07 53 01"
src="https://github.com/bevyengine/bevy/assets/302146/22073f5d-99a7-49b0-9584-d3ac3eac3033">
+0.6% median frame time.
### UI
**NOTE: On `main` UI is using `SparseSet<Entity, T>`!**
`many_buttons`
<img width="1111" alt="Screenshot 2023-09-27 at 07 53 26"
src="https://github.com/bevyengine/bevy/assets/302146/66afd56d-cbe4-49e7-8b64-2f28f6043d85">
+15.1% median frame time.
## Alternatives
- Cart originally suggested trying out `SparseSet<Entity, T>` and indeed
that is slightly faster under ideal conditions. However,
`PassHashMap<Entity, T>` has better worst case performance when data is
randomly distributed, rather than in sorted render order, and does not
have the worst case memory usage that `SparseSet`'s dense `Vec<usize>`
that maps from the `Entity` index to sparse index into `Vec<T>`. This
dense `Vec` has to be as large as the largest Entity index used with the
`SparseSet`.
- I also tested `PassHashMap<u32, T>`, intending to use `Entity.index()`
as the key, but this proved to sometimes be slower and mostly no
different.
- The only outstanding approach that has not been implemented and tested
is to _not_ clear the render world of its entities each frame. That has
its own problems, though they could perhaps be solved.
- Performance-wise, if the entities and their component data were not
cleared, then they would incur table moves on spawn, and should not
thereafter, rather just their component data would be overwritten.
Ideally we would have a neat way of either updating data in-place via
`&mut T` queries, or inserting components if not present. This would
likely be quite cumbersome to have to remember to do everywhere, but
perhaps it only needs to be done in the more performance-sensitive
systems.
- The main problem to solve however is that we want to both maintain a
mapping between main world entities and render world entities, be able
to run the render app and world in parallel with the main app and world
for pipelined rendering, and at the same time be able to spawn entities
in the render world in such a way that those Entity ids do not collide
with those spawned in the main world. This is potentially quite
solvable, but could well be a lot of ECS work to do it in a way that
makes sense.
---
## Changelog
- Changed: Component data for entities to be drawn are no longer stored
on entities in the render world. Instead, data is stored in a
`EntityHashMap<Entity, T>` in various resources. This brings significant
performance benefits due to the way the render app clears entities every
frame. Resources of most interest are `RenderMeshInstances` and
`RenderMaterialInstances`, and their 2D counterparts.
## Migration Guide
Previously the render app extracted mesh entities and their component
data from the main world and stored them as entities and components in
the render world. Now they are extracted into essentially
`EntityHashMap<Entity, T>` where `T` are structs containing an
appropriate group of data. This means that while extract set systems
will continue to run extract queries against the main world they will
store their data in hash maps. Also, systems in later sets will either
need to look up entities in the available resources such as
`RenderMeshInstances`, or maintain their own `EntityHashMap<Entity, T>`
for their own data.
Before:
```rust
fn queue_custom(
material_meshes: Query<(Entity, &MeshTransforms, &Handle<Mesh>), With<InstanceMaterialData>>,
) {
...
for (entity, mesh_transforms, mesh_handle) in &material_meshes {
...
}
}
```
After:
```rust
fn queue_custom(
render_mesh_instances: Res<RenderMeshInstances>,
instance_entities: Query<Entity, With<InstanceMaterialData>>,
) {
...
for entity in &instance_entities {
let Some(mesh_instance) = render_mesh_instances.get(&entity) else { continue; };
// The mesh handle in `AssetId<Mesh>` form, and the `MeshTransforms` can now
// be found in `mesh_instance` which is a `RenderMeshInstance`
...
}
}
```
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
This is a duplicate of #9632, it was created since I forgot to make a
new branch when I first made this PR, so I was having trouble resolving
merge conflicts, meaning I had to rebuild my PR.
# Objective
- Allow other plugins to create the renderer resources. An example of
where this would be required is my [OpenXR
plugin](https://github.com/awtterpip/bevy_openxr)
## Solution
- Changed the bevy RenderPlugin to optionally take precreated render
resources instead of a configuration.
## Migration Guide
The `RenderPlugin` now takes a `RenderCreation` enum instead of
`WgpuSettings`. `RenderSettings::default()` returns
`RenderSettings::Automatic(WgpuSettings::default())`. `RenderSettings`
also implements `From<WgpuSettings>`.
```rust
// before
RenderPlugin {
wgpu_settings: WgpuSettings {
...
},
}
// now
RenderPlugin {
render_creation: RenderCreation::Automatic(WgpuSettings {
...
}),
}
// or
RenderPlugin {
render_creation: WgpuSettings {
...
}.into(),
}
```
---------
Co-authored-by: Malek <pocmalek@gmail.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
Fixes#9625
## Solution
Adds `async-io` as an optional dependency of `bevy_tasks`. When enabled,
this causes calls to `futures_lite::future::block_on` to be replaced
with calls to `async_io::block_on`.
---
## Changelog
- Added a new `async-io` feature to `bevy_tasks`. When enabled, this
causes `bevy_tasks` to use `async-io`'s implemention of `block_on`
instead of `futures-lite`'s implementation. You should enable this if
you use `async-io` in your application.
# Objective
- Implement the foundations of automatic batching/instancing of draw
commands as the next step from #89
- NOTE: More performance improvements will come when more data is
managed and bound in ways that do not require rebinding such as mesh,
material, and texture data.
## Solution
- The core idea for batching of draw commands is to check whether any of
the information that has to be passed when encoding a draw command
changes between two things that are being drawn according to the sorted
render phase order. These should be things like the pipeline, bind
groups and their dynamic offsets, index/vertex buffers, and so on.
- The following assumptions have been made:
- Only entities with prepared assets (pipelines, materials, meshes) are
queued to phases
- View bindings are constant across a phase for a given draw function as
phases are per-view
- `batch_and_prepare_render_phase` is the only system that performs this
batching and has sole responsibility for preparing the per-object data.
As such the mesh binding and dynamic offsets are assumed to only vary as
a result of the `batch_and_prepare_render_phase` system, e.g. due to
having to split data across separate uniform bindings within the same
buffer due to the maximum uniform buffer binding size.
- Implement `GpuArrayBuffer` for `Mesh2dUniform` to store Mesh2dUniform
in arrays in GPU buffers rather than each one being at a dynamic offset
in a uniform buffer. This is the same optimisation that was made for 3D
not long ago.
- Change batch size for a range in `PhaseItem`, adding API for getting
or mutating the range. This is more flexible than a size as the length
of the range can be used in place of the size, but the start and end can
be otherwise whatever is needed.
- Add an optional mesh bind group dynamic offset to `PhaseItem`. This
avoids having to do a massive table move just to insert
`GpuArrayBufferIndex` components.
## Benchmarks
All tests have been run on an M1 Max on AC power. `bevymark` and
`many_cubes` were modified to use 1920x1080 with a scale factor of 1. I
run a script that runs a separate Tracy capture process, and then runs
the bevy example with `--features bevy_ci_testing,trace_tracy` and
`CI_TESTING_CONFIG=../benchmark.ron` with the contents of
`../benchmark.ron`:
```rust
(
exit_after: Some(1500)
)
```
...in order to run each test for 1500 frames.
The recent changes to `many_cubes` and `bevymark` added reproducible
random number generation so that with the same settings, the same rng
will occur. They also added benchmark modes that use a fixed delta time
for animations. Combined this means that the same frames should be
rendered both on main and on the branch.
The graphs compare main (yellow) to this PR (red).
### 3D Mesh `many_cubes --benchmark`
<img width="1411" alt="Screenshot 2023-09-03 at 23 42 10"
src="https://github.com/bevyengine/bevy/assets/302146/2088716a-c918-486c-8129-090b26fd2bc4">
The mesh and material are the same for all instances. This is basically
the best case for the initial batching implementation as it results in 1
draw for the ~11.7k visible meshes. It gives a ~30% reduction in median
frame time.
The 1000th frame is identical using the flip tool:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4615 seconds
```
### 3D Mesh `many_cubes --benchmark --material-texture-count 10`
<img width="1404" alt="Screenshot 2023-09-03 at 23 45 18"
src="https://github.com/bevyengine/bevy/assets/302146/5ee9c447-5bd2-45c6-9706-ac5ff8916daf">
This run uses 10 different materials by varying their textures. The
materials are randomly selected, and there is no sorting by material
bind group for opaque 3D so any batching is 'random'. The PR produces a
~5% reduction in median frame time. If we were to sort the opaque phase
by the material bind group, then this should be a lot faster. This
produces about 10.5k draws for the 11.7k visible entities. This makes
sense as randomly selecting from 10 materials gives a chance that two
adjacent entities randomly select the same material and can be batched.
The 1000th frame is identical in flip:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4537 seconds
```
### 3D Mesh `many_cubes --benchmark --vary-per-instance`
<img width="1394" alt="Screenshot 2023-09-03 at 23 48 44"
src="https://github.com/bevyengine/bevy/assets/302146/f02a816b-a444-4c18-a96a-63b5436f3b7f">
This run varies the material data per instance by randomly-generating
its colour. This is the worst case for batching and that it performs
about the same as `main` is a good thing as it demonstrates that the
batching has minimal overhead when dealing with ~11k visible mesh
entities.
The 1000th frame is identical according to flip:
```
Mean: 0.000000
Weighted median: 0.000000
1st weighted quartile: 0.000000
3rd weighted quartile: 0.000000
Min: 0.000000
Max: 0.000000
Evaluation time: 0.4568 seconds
```
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d`
<img width="1412" alt="Screenshot 2023-09-03 at 23 59 56"
src="https://github.com/bevyengine/bevy/assets/302146/cb02ae07-237b-4646-ae9f-fda4dafcbad4">
This spawns 160 waves of 1000 quad meshes that are shaded with
ColorMaterial. Each wave has a different material so 160 waves currently
should result in 160 batches. This results in a 50% reduction in median
frame time.
Capturing a screenshot of the 1000th frame main vs PR gives:
```
Mean: 0.001222
Weighted median: 0.750432
1st weighted quartile: 0.453494
3rd weighted quartile: 0.969758
Min: 0.000000
Max: 0.990296
Evaluation time: 0.4255 seconds
```
So they seem to produce the same results. I also double-checked the
number of draws. `main` does 160000 draws, and the PR does 160, as
expected.
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d --material-texture-count 10`
<img width="1392" alt="Screenshot 2023-09-04 at 00 09 22"
src="https://github.com/bevyengine/bevy/assets/302146/4358da2e-ce32-4134-82df-3ab74c40849c">
This generates 10 textures and generates materials for each of those and
then selects one material per wave. The median frame time is reduced by
50%. Similar to the plain run above, this produces 160 draws on the PR
and 160000 on `main` and the 1000th frame is identical (ignoring the fps
counter text overlay).
```
Mean: 0.002877
Weighted median: 0.964980
1st weighted quartile: 0.668871
3rd weighted quartile: 0.982749
Min: 0.000000
Max: 0.992377
Evaluation time: 0.4301 seconds
```
### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode
mesh2d --vary-per-instance`
<img width="1396" alt="Screenshot 2023-09-04 at 00 13 53"
src="https://github.com/bevyengine/bevy/assets/302146/b2198b18-3439-47ad-919a-cdabe190facb">
This creates unique materials per instance by randomly-generating the
material's colour. This is the worst case for 2D batching. Somehow, this
PR manages a 7% reduction in median frame time. Both main and this PR
issue 160000 draws.
The 1000th frame is the same:
```
Mean: 0.001214
Weighted median: 0.937499
1st weighted quartile: 0.635467
3rd weighted quartile: 0.979085
Min: 0.000000
Max: 0.988971
Evaluation time: 0.4462 seconds
```
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite`
<img width="1396" alt="Screenshot 2023-09-04 at 12 21 12"
src="https://github.com/bevyengine/bevy/assets/302146/8b31e915-d6be-4cac-abf5-c6a4da9c3d43">
This just spawns 160 waves of 1000 sprites. There should be and is no
notable difference between main and the PR.
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite --material-texture-count 10`
<img width="1389" alt="Screenshot 2023-09-04 at 12 36 08"
src="https://github.com/bevyengine/bevy/assets/302146/45fe8d6d-c901-4062-a349-3693dd044413">
This spawns the sprites selecting a texture at random per instance from
the 10 generated textures. This has no significant change vs main and
shouldn't.
### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode
sprite --vary-per-instance`
<img width="1401" alt="Screenshot 2023-09-04 at 12 29 52"
src="https://github.com/bevyengine/bevy/assets/302146/762c5c60-352e-471f-8dbe-bbf10e24ebd6">
This sets the sprite colour as being unique per instance. This can still
all be drawn using one batch. There should be no difference but the PR
produces median frame times that are 4% higher. Investigation showed no
clear sources of cost, rather a mix of give and take that should not
happen. It seems like noise in the results.
### Summary
| Benchmark | % change in median frame time |
| ------------- | ------------- |
| many_cubes | 🟩 -30% |
| many_cubes 10 materials | 🟩 -5% |
| many_cubes unique materials | 🟩 ~0% |
| bevymark mesh2d | 🟩 -50% |
| bevymark mesh2d 10 materials | 🟩 -50% |
| bevymark mesh2d unique materials | 🟩 -7% |
| bevymark sprite | 🟥 2% |
| bevymark sprite 10 materials | 🟥 0.6% |
| bevymark sprite unique materials | 🟥 4.1% |
---
## Changelog
- Added: 2D and 3D mesh entities that share the same mesh and material
(same textures, same data) are now batched into the same draw command
for better performance.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Nicola Papale <nico@nicopap.ch>
# Objective
Fix a performance regression in the "[bevy vs
pixi](https://github.com/SUPERCILEX/bevy-vs-pixi)" benchmark.
This benchmark seems to have a slightly pathological distribution of `z`
values -- Sprites are spawned with a random `z` value with a child
sprite at `f32::EPSILON` relative to the parent.
See discussion here:
https://github.com/bevyengine/bevy/issues/8100#issuecomment-1726978633
## Solution
Use `radsort` for sorting `Transparent2d` `PhaseItem`s.
Use random `z` values in bevymark to stress the phase sort. Add an
`--ordered-z` option to `bevymark` that uses the old behavior.
## Benchmarks
mac m1 max
| benchmark | fps before | fps after | diff |
| - | - | - | - |
| bevymark --waves 120 --per-wave 1000 --random-z | 42.16 | 47.06 | 🟩
+11.6% |
| bevymark --waves 120 --per-wave 1000 | 52.50 | 52.29 | 🟥 -0.4% |
| bevymark --waves 120 --per-wave 1000 --mode mesh2d --random-z | 9.64 |
10.24 | 🟩 +6.2% |
| bevymark --waves 120 --per-wave 1000 --mode mesh2d | 15.83 | 15.59 | 🟥
-1.5% |
| bevy-vs-pixi | 39.71 | 59.88 | 🟩 +50.1% |
## Discussion
It's possible that `TransparentUi` should also change. We could probably
use `slice::sort_unstable_by_key` with the current sort key though, as
its items are always sorted and unique. I'd prefer to follow up later to
look into that.
Here's a survey of sorts used by other `PhaseItem`s
#### slice::sort_by_key
`Transparent2d`, `TransparentUi`
#### radsort
`Opaque3d`, `AlphaMask3d`, `Transparent3d`, `Opaque3dPrepass`,
`AlphaMask3dPrepass`, `Shadow`
I also tried `slice::sort_unstable_by_key` with a compound sort key
including `Entity`, but it didn't seem as promising and I didn't test it
as thoroughly.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
- When adding/removing bindings in large binding lists, git would
generate very difficult-to-read diffs
## Solution
- Move the `@group(X) @binding(Y)` into the same line as the binding
type declaration
I'm adopting this ~~child~~ PR.
# Objective
- Working with exclusive world access is not always easy: in many cases,
a standard system or three is more ergonomic to write, and more
modularly maintainable.
- For small, one-off tasks (commonly handled with scripting), running an
event-reader system incurs a small but flat overhead cost and muddies
the schedule.
- Certain forms of logic (e.g. turn-based games) want very fine-grained
linear and/or branching control over logic.
- SystemState is not automatically cached, and so performance can suffer
and change detection breaks.
- Fixes https://github.com/bevyengine/bevy/issues/2192.
- Partial workaround for https://github.com/bevyengine/bevy/issues/279.
## Solution
- Adds a SystemRegistry resource to the World, which stores initialized
systems keyed by their SystemSet.
- Allows users to call world.run_system(my_system) and
commands.run_system(my_system), without re-initializing or losing state
(essential for change detection).
- Add a Callback type to enable convenient use of dynamic one shot
systems and reduce the mental overhead of working with Box<dyn
SystemSet>.
- Allow users to run systems based on their SystemSet, enabling more
complex user-made abstractions.
## Future work
- Parameterized one-shot systems would improve reusability and bring
them closer to events and commands. The API could be something like
run_system_with_input(my_system, my_input) and use the In SystemParam.
- We should evaluate the unification of commands and one-shot systems
since they are two different ways to run logic on demand over a World.
### Prior attempts
- https://github.com/bevyengine/bevy/pull/2234
- https://github.com/bevyengine/bevy/pull/2417
- https://github.com/bevyengine/bevy/pull/4090
- https://github.com/bevyengine/bevy/pull/7999
This PR continues the work done in
https://github.com/bevyengine/bevy/pull/7999.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Co-authored-by: Alejandro Pascual Pozo <alejandro.pascual.pozo@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Dmytro Banin <banind@cs.washington.edu>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Make `bevy_ui` "root" nodes more intuitive to use/style by:
- Removing the implicit flexbox styling (such as stretch alignment) that
is applied to them, and replacing it with more intuitive CSS Grid
styling (notably with stretch alignment disabled in both axes).
- Making root nodes layout independently of each other. Instead of there
being a single implicit "viewport" node that all root nodes are children
of, there is now an implicit "viewport" node *per root node*. And layout
of each tree is computed separately.
## Solution
- Remove the global implicit viewport node, and instead create an
implicit viewport node for each user-specified root node.
- Keep track of both the user-specified root nodes and the implicit
viewport nodes in a separate `Vec`.
- Use the window's size as the `available_space` parameter to
`Taffy.compute_layout` rather than setting it on the implicit viewport
node (and set the viewport to `height: 100%; width: 100%` to make this
"just work").
---
## Changelog
- Bevy UI now lays out root nodes independently of each other in
separate layout contexts.
- The implicit viewport node (which contains each user-specified root
node) is now `Display::Grid` with `align_items` and `justify_items` both
set to `Start`.
## Migration Guide
- Bevy UI now lays out root nodes independently of each other in
separate layout contexts. If you were relying on your root nodes being
able to affect each other's layouts, then you may need to wrap them in a
single root node.
- The implicit viewport node (which contains each user-specified root
node) is now `Display::Grid` with `align_items` and `justify_items` both
set to `Start`. You may need to add `height: Val::Percent(100.)` to your
root nodes if you were previously relying on being implicitly set.
# Objective
Make the output of this example repeatable so it can be utilized by
automated screenshot diffing.
## Solution
- Use a seeded RNG for the random colors
- Offset the meshes slightly in z so they don't intersect each other at
the extents of their animations.
# Objective
Fix these
```
-- rotate_cube and move_cube
conflict on: ["bevy_transform::components::transform::Transform", "transform::CubeState"]
-- rotate_cube and scale_down_sphere_proportional_to_cube_travel_distance
conflict on: ["bevy_transform::components::transform::Transform", "transform::CubeState"]
-- move_cube and scale_down_sphere_proportional_to_cube_travel_distance
conflict on: ["bevy_transform::components::transform::Transform", "transform::CubeState"]
```
The three systems in this example depend on the results of the others.
This leads to minor but detectable differences in output between runs by
automated screenshot diffing depending on the order of the schedule.
We don't necessarily need to be able to do this for **every** example,
but I think this is a case where fixing it is easy / maybe the right
thing to do anyway.
## Solution
Chain the three systems
# Objective
Rename RemovedComponents::iter/iter_with_id to read/read_with_id to make
it clear that it consume the data
Fixes#9755.
(It's my first pull request, if i've made any mistake, please let me
know)
## Solution
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
## Changelog
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
Deprecate RemovedComponents::iter/iter_with_id
Remove IntoIterator implementation
Update removal_detection example accordingly
---
## Migration Guide
Rename calls of RemovedComponents::iter/iter_with_id to
read/read_with_id
Replace IntoIterator iteration (&mut <RemovedComponents>) with .read()
---------
Co-authored-by: denshi_ika <mojang2824@gmail.com>
# Objective
I noticed this while testing #9733.
It's not causing any problems, but we shouldn't teach users to scale 2d
stuff in z.
## Solution
Only scale in x and y.
# Objective
- Compile all targets without warnings about unused doc comments.
## Solution
- Turn unused doc comments into regular comments. Doc comments aren't
supported on expressions, so they can just be regular comments.
Comment references non existent `FromResources` instead of `FromWorld`
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Implement `From<String>` and `From<&str>` for `TextSection`
Example from something I was working on earlier:
```rust
parent.spawn(TextBundle::from_sections([
TextSection::new("press ".to_string(), TextStyle::default()),
TextSection::new("space".to_string(), TextStyle { color: Color::YELLOW, ..default() }),
TextSection::new(" to advance frames".to_string(), TextStyle::default()),
]));
```
After an `impl From<&str> for TextSection` :
```rust
parent.spawn(TextBundle::from_sections([
"press ".into(),
TextSection::new("space".to_string(), TextStyle { color: Color::YELLOW, ..default() }),
" to advance frames".into(),
]));
```
* Potentially unhelpful without a default font, so behind the
`default_font` feature.
Co-authored-by: [hate](https://github.com/hate)
---------
Co-authored-by: hate <15314665+hate@users.noreply.github.com>
