mirror of
https://github.com/bevyengine/bevy
synced 2024-11-26 14:40:19 +00:00
24 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Carter Anderson
|
dd619a1087
|
New Exposure and Lighting Defaults (and calibrate examples) (#11868)
# Objective After adding configurable exposure, we set the default ev100 value to `7` (indoor). This brought us out of sync with Blender's configuration and defaults. This PR changes the default to `9.7` (bright indoor or very overcast outdoors), as I calibrated in #11577. This feels like a very reasonable default. The other changes generally center around tweaking Bevy's lighting defaults and examples to play nicely with this number, alongside a few other tweaks and improvements. Note that for artistic reasons I have reverted some examples, which changed to directional lights in #11581, back to point lights. Fixes #11577 --- ## Changelog - Changed `Exposure::ev100` from `7` to `9.7` to better match Blender - Renamed `ExposureSettings` to `Exposure` - `Camera3dBundle` now includes `Exposure` for discoverability - Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the middle-to-top of those ranges instead of near the bottom - Added new `AMBIENT_DAYLIGHT` constant and set that as the new `DirectionalLight` default illuminance. - `PointLight` and `SpotLight` now have a default `intensity` of 1,000,000 lumens. This makes them actually useful in the context of the new "semi-outdoor" exposure and puts them in the "cinema lighting" category instead of the "common household light" category. They are also reasonably close to the Blender default. - `AmbientLight` default has been bumped from `20` to `80`. ## Migration Guide - The increased `Exposure::ev100` means that all existing 3D lighting will need to be adjusted to match (DirectionalLights, PointLights, SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust the `Exposure::ev100` on your cameras to work nicely with your current lighting values. If you are currently relying on default intensity values, you might need to change the intensity to achieve the same effect. Note that in Bevy 0.12, point/spot lights had a different hard coded ev100 value than directional lights. In Bevy 0.13, they use the same ev100, so if you have both in your scene, the _scale_ between these light types has changed and you will likely need to adjust one or both of them. |
||
Lynn
|
4c86ad6aed
|
Mesh insert indices (#11745)
# Objective - Fixes #11740 ## Solution - Turned `Mesh::set_indices` into `Mesh::insert_indices` and added related methods for completeness. --- ## Changelog - Replaced `Mesh::set_indices(indices: Option<Indices>)` with `Mesh::insert_indices(indices: Indices)` - Replaced `Mesh::with_indices(indices: Option<Indices>)` with `Mesh::with_inserted_indices(indices: Indices)` and `Mesh::with_removed_indices()` mirroring the API for inserting / removing attributes. - Updated the examples and internal uses of the APIs described above. ## Migration Guide - Use `Mesh::insert_indices` or `Mesh::with_inserted_indices` instead of `Mesh::set_indices` / `Mesh::with_indices`. - If you have passed `None` to `Mesh::set_indices` or `Mesh::with_indices` you should use `Mesh::remove_indices` or `Mesh::with_removed_indices` instead. --------- Co-authored-by: François <mockersf@gmail.com> |
||
Brian Reavis
|
6b40b6749e
|
RenderAssetPersistencePolicy → RenderAssetUsages (#11399)
# Objective Right now, all assets in the main world get extracted and prepared in the render world (if the asset's using the RenderAssetPlugin). This is unfortunate for two cases: 1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual `Image` assets that make up the atlas are cloned and prepared individually when there's no reason for them to be. The atlas textures are built on the CPU in the main world. *There can be hundreds of images that get prepared for rendering only not to be used.* 2. If one loads an Image and needs to transform it in a system before rendering it, kind of like the [decompression example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120), there's a price paid for extracting & preparing the asset that's not intended to be rendered yet. ------ * References #10520 * References #1782 ## Solution This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt that the objective with the parameter is so similar in nature to wgpu's [`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html) and [`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html), that it may as well be just like that. ```rust // This asset only needs to be in the main world. Don't extract and prepare it. RenderAssetUsages::MAIN_WORLD // Keep this asset in the main world and RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD // This asset is only needed in the render world. Remove it from the asset server once extracted. RenderAssetUsages::RENDER_WORLD ``` ### Alternate Solution I considered introducing a third field to `RenderAssetPersistencePolicy` enum: ```rust enum RenderAssetPersistencePolicy { /// Keep the asset in the main world after extracting to the render world. Keep, /// Remove the asset from the main world after extracting to the render world. Unload, /// This doesn't need to be in the render world at all. NoExtract, // <----- } ``` Functional, but this seemed like shoehorning. Another option is renaming the enum to something like: ```rust enum RenderAssetExtractionPolicy { /// Extract the asset and keep it in the main world. Extract, /// Remove the asset from the main world after extracting to the render world. ExtractAndUnload, /// This doesn't need to be in the render world at all. NoExtract, } ``` I think this last one could be a good option if the bitflags are too clunky. ## Migration Guide * `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD | RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`) * `RenderAssetPersistencePolicy::Unload` → `RenderAssetUsage::RENDER_WORLD` * For types implementing the `RenderAsset` trait, change `fn persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn asset_usage(&self) -> RenderAssetUsages`. * Change any references to `cpu_persistent_access` (`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`). This applies to `Image`, `Mesh`, and a few other types. |
||
JMS55
|
fcd7c0fc3d
|
Exposure settings (adopted) (#11347)
Rebased and finished version of https://github.com/bevyengine/bevy/pull/8407. Huge thanks to @GitGhillie for adjusting all the examples, and the many other people who helped write this PR (@superdump , @coreh , among others) :) Fixes https://github.com/bevyengine/bevy/issues/8369 --- ## Changelog - Added a `brightness` control to `Skybox`. - Added an `intensity` control to `EnvironmentMapLight`. - Added `ExposureSettings` and `PhysicalCameraParameters` for controlling exposure of 3D cameras. - Removed the baked-in `DirectionalLight` exposure Bevy previously hardcoded internally. ## Migration Guide - If using a `Skybox` or `EnvironmentMapLight`, use the new `brightness` and `intensity` controls to adjust their strength. - All 3D scene will now have different apparent brightnesses due to Bevy implementing proper exposure controls. You will have to adjust the intensity of your lights and/or your camera exposure via the new `ExposureSettings` component to compensate. --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: GitGhillie <jillisnoordhoek@gmail.com> Co-authored-by: Marco Buono <thecoreh@gmail.com> Co-authored-by: vero <email@atlasdostal.com> Co-authored-by: atlas dostal <rodol@rivalrebels.com> |
||
Joona Aalto
|
a795de30b4
|
Use impl Into<A> for Assets::add (#10878)
# Motivation
When spawning entities into a scene, it is very common to create assets
like meshes and materials and to add them via asset handles. A common
setup might look like this:
```rust
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
commands.spawn(PbrBundle {
mesh: meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
material: materials.add(StandardMaterial::from(Color::RED)),
..default()
});
}
```
Let's take a closer look at the part that adds the assets using `add`.
```rust
mesh: meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
material: materials.add(StandardMaterial::from(Color::RED)),
```
Here, "mesh" and "material" are both repeated three times. It's very
explicit, but I find it to be a bit verbose. In addition to being more
code to read and write, the extra characters can sometimes also lead to
the code being formatted to span multiple lines even though the core
task, adding e.g. a primitive mesh, is extremely simple.
A way to address this is by using `.into()`:
```rust
mesh: meshes.add(shape::Cube { size: 1.0 }.into()),
material: materials.add(Color::RED.into()),
```
This is fine, but from the names and the type of `meshes`, we already
know what the type should be. It's very clear that `Cube` should be
turned into a `Mesh` because of the context it's used in. `.into()` is
just seven characters, but it's so common that it quickly adds up and
gets annoying.
It would be nice if you could skip all of the conversion and let Bevy
handle it for you:
```rust
mesh: meshes.add(shape::Cube { size: 1.0 }),
material: materials.add(Color::RED),
```
# Objective
Make adding assets more ergonomic by making `Assets::add` take an `impl
Into<A>` instead of `A`.
## Solution
`Assets::add` now takes an `impl Into<A>` instead of `A`, so e.g. this
works:
```rust
commands.spawn(PbrBundle {
mesh: meshes.add(shape::Cube { size: 1.0 }),
material: materials.add(Color::RED),
..default()
});
```
I also changed all examples to use this API, which increases consistency
as well because `Mesh::from` and `into` were being used arbitrarily even
in the same file. This also gets rid of some lines of code because
formatting is nicer.
---
## Changelog
- `Assets::add` now takes an `impl Into<A>` instead of `A`
- Examples don't use `T::from(K)` or `K.into()` when adding assets
## Migration Guide
Some `into` calls that worked previously might now be broken because of
the new trait bounds. You need to either remove `into` or perform the
conversion explicitly with `from`:
```rust
// Doesn't compile
let mesh_handle = meshes.add(shape::Cube { size: 1.0 }.into()),
// These compile
let mesh_handle = meshes.add(shape::Cube { size: 1.0 }),
let mesh_handle = meshes.add(Mesh::from(shape::Cube { size: 1.0 })),
```
## Concerns
I believe the primary concerns might be:
1. Is this too implicit?
2. Does this increase codegen bloat?
Previously, the two APIs were using `into` or `from`, and now it's
"nothing" or `from`. You could argue that `into` is slightly more
explicit than "nothing" in cases like the earlier examples where a
`Color` gets converted to e.g. a `StandardMaterial`, but I personally
don't think `into` adds much value even in this case, and you could
still see the actual type from the asset type.
As for codegen bloat, I doubt it adds that much, but I'm not very
familiar with the details of codegen. I personally value the user-facing
code reduction and ergonomics improvements that these changes would
provide, but it might be worth checking the other effects in more
detail.
Another slight concern is migration pain; apps might have a ton of
`into` calls that would need to be removed, and it did take me a while
to do so for Bevy itself (maybe around 20-40 minutes). However, I think
the fact that there *are* so many `into` calls just highlights that the
API could be made nicer, and I'd gladly migrate my own projects for it.
|
||
|
JMS55
|
44424391fe
|
Unload render assets from RAM (#10520)
# Objective - No point in keeping Meshes/Images in RAM once they're going to be sent to the GPU, and kept in VRAM. This saves a _significant_ amount of memory (several GBs) on scenes like bistro. - References - https://github.com/bevyengine/bevy/pull/1782 - https://github.com/bevyengine/bevy/pull/8624 ## Solution - Augment RenderAsset with the capability to unload the underlying asset after extracting to the render world. - Mesh/Image now have a cpu_persistent_access field. If this field is RenderAssetPersistencePolicy::Unload, the asset will be unloaded from Assets<T>. - A new AssetEvent is sent upon dropping the last strong handle for the asset, which signals to the RenderAsset to remove the GPU version of the asset. --- ## Changelog - Added `AssetEvent::NoLongerUsed` and `AssetEvent::is_no_longer_used()`. This event is sent when the last strong handle of an asset is dropped. - Rewrote the API for `RenderAsset` to allow for unloading the asset data from the CPU. - Added `RenderAssetPersistencePolicy`. - Added `Mesh::cpu_persistent_access` for memory savings when the asset is not needed except for on the GPU. - Added `Image::cpu_persistent_access` for memory savings when the asset is not needed except for on the GPU. - Added `ImageLoaderSettings::cpu_persistent_access`. - Added `ExrTextureLoaderSettings`. - Added `HdrTextureLoaderSettings`. ## Migration Guide - Asset loaders (GLTF, etc) now load meshes and textures without `cpu_persistent_access`. These assets will be removed from `Assets<Mesh>` and `Assets<Image>` once `RenderAssets<Mesh>` and `RenderAssets<Image>` contain the GPU versions of these assets, in order to reduce memory usage. If you require access to the asset data from the CPU in future frames after the GLTF asset has been loaded, modify all dependent `Mesh` and `Image` assets and set `cpu_persistent_access` to `RenderAssetPersistencePolicy::Keep`. - `Mesh` now requires a new `cpu_persistent_access` field. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the previous behavior. - `Image` now requires a new `cpu_persistent_access` field. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the previous behavior. - `MorphTargetImage::new()` now requires a new `cpu_persistent_access` parameter. Set it to `RenderAssetPersistencePolicy::Keep` to mimic the previous behavior. - `DynamicTextureAtlasBuilder::add_texture()` now requires that the `TextureAtlas` you pass has an `Image` with `cpu_persistent_access: RenderAssetPersistencePolicy::Keep`. Ensure you construct the image properly for the texture atlas. - The `RenderAsset` trait has significantly changed, and requires adapting your existing implementations. - The trait now requires `Clone`. - The `ExtractedAsset` associated type has been removed (the type itself is now extracted). - The signature of `prepare_asset()` is slightly different - A new `persistence_policy()` method is now required (return RenderAssetPersistencePolicy::Unload to match the previous behavior). - Match on the new `NoLongerUsed` variant for exhaustive matches of `AssetEvent`. |
||
Marco Buono
|
12a2f83edd
|
Add consuming builder methods for more ergonomic Mesh creation (#10056)
# Objective
- This PR aims to make creating meshes a little bit more ergonomic,
specifically by removing the need for intermediate mutable variables.
## Solution
- We add methods that consume the `Mesh` and return a mesh with the
specified changes, so that meshes can be entirely constructed via
builder-style calls, without intermediate variables;
- Methods are flagged with `#[must_use]` to ensure proper use;
- Examples are updated to use the new methods where applicable. Some
examples are kept with the mutating methods so that users can still
easily discover them, and also where the new methods wouldn't really be
an improvement.
## Examples
Before:
```rust
let mut mesh = Mesh::new(PrimitiveTopology::TriangleList);
mesh.insert_attribute(Mesh::ATTRIBUTE_POSITION, vs);
mesh.insert_attribute(Mesh::ATTRIBUTE_NORMAL, vns);
mesh.insert_attribute(Mesh::ATTRIBUTE_UV_0, vts);
mesh.set_indices(Some(Indices::U32(tris)));
mesh
```
After:
```rust
Mesh::new(PrimitiveTopology::TriangleList)
.with_inserted_attribute(Mesh::ATTRIBUTE_POSITION, vs)
.with_inserted_attribute(Mesh::ATTRIBUTE_NORMAL, vns)
.with_inserted_attribute(Mesh::ATTRIBUTE_UV_0, vts)
.with_indices(Some(Indices::U32(tris)))
```
Before:
```rust
let mut cube = Mesh::from(shape::Cube { size: 1.0 });
cube.generate_tangents().unwrap();
PbrBundle {
mesh: meshes.add(cube),
..default()
}
```
After:
```rust
PbrBundle {
mesh: meshes.add(
Mesh::from(shape::Cube { size: 1.0 })
.with_generated_tangents()
.unwrap(),
),
..default()
}
```
---
## Changelog
- Added consuming builder methods for more ergonomic `Mesh` creation:
`with_inserted_attribute()`, `with_removed_attribute()`,
`with_indices()`, `with_duplicated_vertices()`,
`with_computed_flat_normals()`, `with_generated_tangents()`,
`with_morph_targets()`, `with_morph_target_names()`.
|
||
Rob Parrett
|
73e06e33da
|
Use a seeded rng for custom_skinned_mesh example (#9846)
# Objective Make the output of this example repeatable so it can be utilized by automated screenshot diffing. ## Solution - Use a seeded RNG for the random colors - Offset the meshes slightly in z so they don't intersect each other at the extents of their animations. |
||
|
Carter Anderson
|
aefe1f0739
|
Schedule-First: the new and improved add_systems (#8079)
Co-authored-by: Mike <mike.hsu@gmail.com> |
||
JoJoJet
|
fd1af7c8b8
|
Replace multiple calls to add_system with add_systems (#8001)
|
||
|
Carter Anderson
|
dcc03724a5 |
Base Sets (#7466)
# Objective NOTE: This depends on #7267 and should not be merged until #7267 is merged. If you are reviewing this before that is merged, I highly recommend viewing the Base Sets commit instead of trying to find my changes amongst those from #7267. "Default sets" as described by the [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) have some [unfortunate consequences](https://github.com/bevyengine/bevy/discussions/7365). ## Solution This adds "base sets" as a variant of `SystemSet`: A set is a "base set" if `SystemSet::is_base` returns `true`. Typically this will be opted-in to using the `SystemSet` derive: ```rust #[derive(SystemSet, Clone, Hash, Debug, PartialEq, Eq)] #[system_set(base)] enum MyBaseSet { A, B, } ``` **Base sets are exclusive**: a system can belong to at most one "base set". Adding a system to more than one will result in an error. When possible we fail immediately during system-config-time with a nice file + line number. For the more nested graph-ey cases, this will fail at the final schedule build. **Base sets cannot belong to other sets**: this is where the word "base" comes from Systems and Sets can only be added to base sets using `in_base_set`. Calling `in_set` with a base set will fail. As will calling `in_base_set` with a normal set. ```rust app.add_system(foo.in_base_set(MyBaseSet::A)) // X must be a normal set ... base sets cannot be added to base sets .configure_set(X.in_base_set(MyBaseSet::A)) ``` Base sets can still be configured like normal sets: ```rust app.add_system(MyBaseSet::B.after(MyBaseSet::Ap)) ``` The primary use case for base sets is enabling a "default base set": ```rust schedule.set_default_base_set(CoreSet::Update) // this will belong to CoreSet::Update by default .add_system(foo) // this will override the default base set with PostUpdate .add_system(bar.in_base_set(CoreSet::PostUpdate)) ``` This allows us to build apis that work by default in the standard Bevy style. This is a rough analog to the "default stage" model, but it use the new "stageless sets" model instead, with all of the ordering flexibility (including exclusive systems) that it provides. --- ## Changelog - Added "base sets" and ported CoreSet to use them. ## Migration Guide TODO |
||
Alice Cecile
|
206c7ce219 |
Migrate engine to Schedule v3 (#7267)
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR. # Objective - Followup #6587. - Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45 ## Solution - [x] Remove old scheduling module - [x] Migrate new methods to no longer use extension methods - [x] Fix compiler errors - [x] Fix benchmarks - [x] Fix examples - [x] Fix docs - [x] Fix tests ## Changelog ### Added - a large number of methods on `App` to work with schedules ergonomically - the `CoreSchedule` enum - `App::add_extract_system` via the `RenderingAppExtension` trait extension method - the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms` ### Removed - stages, and all code that mentions stages - states have been dramatically simplified, and no longer use a stack - `RunCriteriaLabel` - `AsSystemLabel` trait - `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition) - systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world - `RunCriteriaLabel` - `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear. ### Changed - `System::default_labels` is now `System::default_system_sets`. - `App::add_default_labels` is now `App::add_default_sets` - `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet` - `App::add_system_set` was renamed to `App::add_systems` - The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum - `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)` - `SystemLabel` trait was replaced by `SystemSet` - `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>` - The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq` - Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria. - Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found. - the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. - `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`. - `bevy_pbr::add_clusters` is no longer an exclusive system - the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling` - `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread. ## Migration Guide - Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)` - Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed. - The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved. - Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior. - Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you. - For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with - `add_system(my_system.in_set(CoreSet::PostUpdate)` - When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages - Run criteria have been renamed to run conditions. These can now be combined with each other and with states. - Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow. - For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label. - Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default. - Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually. - Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`. - the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior. - the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity - `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl. - Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings. - `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds. - `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool. - States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set` ## TODO - [x] remove dead methods on App and World - [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule` - [x] avoid adding the default system set at inappropriate times - [x] remove any accidental cycles in the default plugins schedule - [x] migrate benchmarks - [x] expose explicit labels for the built-in command flush points - [x] migrate engine code - [x] remove all mentions of stages from the docs - [x] verify docs for States - [x] fix uses of exclusive systems that use .end / .at_start / .before_commands - [x] migrate RenderStage and AssetStage - [x] migrate examples - [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub) - [x] ensure that on_enter schedules are run at least once before the main app - [x] re-enable opt-in to execution order ambiguities - [x] revert change to `update_bounds` to ensure it runs in `PostUpdate` - [x] test all examples - [x] unbreak directional lights - [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples) - [x] game menu example shows loading screen and menu simultaneously - [x] display settings menu is a blank screen - [x] `without_winit` example panics - [x] ensure all tests pass - [x] SubApp doc test fails - [x] runs_spawn_local tasks fails - [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120) ## Points of Difficulty and Controversy **Reviewers, please give feedback on these and look closely** 1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup. 2. The outer schedule controls which schedule is run when `App::update` is called. 3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes. 4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset. 5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order 6. Implemetnation strategy for fixed timesteps 7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks. 8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements. ## Future Work (ideally before 0.10) - Rename schedule_v3 module to schedule or scheduling - Add a derive macro to states, and likely a `EnumIter` trait of some form - Figure out what exactly to do with the "systems added should basically work by default" problem - Improve ergonomics for working with fixed timesteps and states - Polish FixedTime API to match Time - Rebase and merge #7415 - Resolve all internal ambiguities (blocked on better tools, especially #7442) - Add "base sets" to replace the removed default sets. |
||
ira
|
2c5d072e76 |
Allow passing glam vector types as vertex attributes (#6442)
Allow passing `Vec`s of glam vector types as vertex attributes. Alternative to #4548 and #2719 Also used some macros to cut down on all the repetition. # Migration Guide Implementations of `From<Vec<[u16; 4]>>` and `From<Vec<[u8; 4]>>` for `VertexAttributeValues` have been removed. I you're passing either `Vec<[u16; 4]>` or `Vec<[u8; 4]>` into `Mesh::insert_attribute` it will now require wrapping it with right the `VertexAttributeValues` enum variant. Co-authored-by: devil-ira <justthecooldude@gmail.com> |
||
|
ira
|
262b3fc40d |
Fix mesh.wgsl error for meshes without normals (#6439)
# Objective Split `model` assignment out of `#ifdef VERTEX_NORMALS`. Remove outdated code/comments talking about required mesh attributes. Co-authored-by: devil-ira <justthecooldude@gmail.com> |
||
Cameron
|
7989cb2650 |
Add global time scaling (#5752)
# Objective - Make `Time` API more consistent. - Support time accel/decel/pause. ## Solution This is just the `Time` half of #3002. I was told that part isn't controversial. - Give the "delta time" and "total elapsed time" methods `f32`, `f64`, and `Duration` variants with consistent naming. - Implement accelerating / decelerating the passage of time. - Implement stopping time. --- ## Changelog - Changed `time_since_startup` to `elapsed` because `time.time_*` is just silly. - Added `relative_speed` and `set_relative_speed` methods. - Added `is_paused`, `pause`, `unpause` , and methods. (I'd prefer `resume`, but `unpause` matches `Timer` API.) - Added `raw_*` variants of the "delta time" and "total elapsed time" methods. - Added `first_update` method because there's a non-zero duration between startup and the first update. ## Migration Guide - `time.time_since_startup()` -> `time.elapsed()` - `time.seconds_since_startup()` -> `time.elapsed_seconds_f64()` - `time.seconds_since_startup_wrapped_f32()` -> `time.elapsed_seconds_wrapped()` If you aren't sure which to use, most systems should continue to use "scaled" time (e.g. `time.delta_seconds()`). The realtime "unscaled" time measurements (e.g. `time.raw_delta_seconds()`) are mostly for debugging and profiling. |
||
|
ira
|
92ba6224b9 |
Use SpatialBundle/TransformBundle in examples (#6002)
Does what it do Co-authored-by: devil-ira <justthecooldude@gmail.com> |
||
|
Carter Anderson
|
01aedc8431 |
Spawn now takes a Bundle (#6054)
# Objective Now that we can consolidate Bundles and Components under a single insert (thanks to #2975 and #6039), almost 100% of world spawns now look like `world.spawn().insert((Some, Tuple, Here))`. Spawning an entity without any components is an extremely uncommon pattern, so it makes sense to give spawn the "first class" ergonomic api. This consolidated api should be made consistent across all spawn apis (such as World and Commands). ## Solution All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input: ```rust // before: commands .spawn() .insert((A, B, C)); world .spawn() .insert((A, B, C); // after commands.spawn((A, B, C)); world.spawn((A, B, C)); ``` All existing instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api. A new `spawn_empty` has been added, replacing the old `spawn` api. By allowing `world.spawn(some_bundle)` to replace `world.spawn().insert(some_bundle)`, this opened the door to removing the initial entity allocation in the "empty" archetype / table done in `spawn()` (and subsequent move to the actual archetype in `.insert(some_bundle)`). This improves spawn performance by over 10%:  To take this measurement, I added a new `world_spawn` benchmark. Unfortunately, optimizing `Commands::spawn` is slightly less trivial, as Commands expose the Entity id of spawned entities prior to actually spawning. Doing the optimization would (naively) require assurances that the `spawn(some_bundle)` command is applied before all other commands involving the entity (which would not necessarily be true, if memory serves). Optimizing `Commands::spawn` this way does feel possible, but it will require careful thought (and maybe some additional checks), which deserves its own PR. For now, it has the same performance characteristics of the current `Commands::spawn_bundle` on main. **Note that 99% of this PR is simple renames and refactors. The only code that needs careful scrutiny is the new `World::spawn()` impl, which is relatively straightforward, but it has some new unsafe code (which re-uses battle tested BundlerSpawner code path).** --- ## Changelog - All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input - All instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api - World and Commands now have `spawn_empty()`, which is equivalent to the old `spawn()` behavior. ## Migration Guide ```rust // Old (0.8): commands .spawn() .insert_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): commands.spawn_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): let entity = commands.spawn().id(); // New (0.9) let entity = commands.spawn_empty().id(); // Old (0.8) let entity = world.spawn().id(); // New (0.9) let entity = world.spawn_empty(); ``` |
||
|
ira
|
b42f426fc3 |
Add associated constant IDENTITY to Transform and friends. (#5340)
# Objective Since `identity` is a const fn that takes no arguments it seems logical to make it an associated constant. This is also more in line with types from glam (eg. `Quat::IDENTITY`). ## Migration Guide The method `identity()` on `Transform`, `GlobalTransform` and `TransformBundle` has been deprecated. Use the associated constant `IDENTITY` instead. Co-authored-by: devil-ira <justthecooldude@gmail.com> |
||
|
ira
|
65252bb87a |
Consistently use PI to specify angles in examples. (#5825)
Examples inconsistently use either `TAU`, `PI`, `FRAC_PI_2` or `FRAC_PI_4`. Often in odd ways and without `use`ing the constants, making it difficult to parse. * Use `PI` to specify angles. * General code-quality improvements. * Fix borked `hierarchy` example. Co-authored-by: devil-ira <justthecooldude@gmail.com> |
||
|
ira
|
4847f7e3ad |
Update codebase to use IntoIterator where possible. (#5269)
Remove unnecessary calls to `iter()`/`iter_mut()`.
Mainly updates the use of queries in our code, docs, and examples.
```rust
// From
for _ in list.iter() {
for _ in list.iter_mut() {
// To
for _ in &list {
for _ in &mut list {
```
We already enable the pedantic lint [clippy::explicit_iter_loop](https://rust-lang.github.io/rust-clippy/stable/) inside of Bevy. However, this only warns for a few known types from the standard library.
## Note for reviewers
As you can see the additions and deletions are exactly equal.
Maybe give it a quick skim to check I didn't sneak in a crypto miner, but you don't have to torture yourself by reading every line.
I already experienced enough pain making this PR :)
Co-authored-by: devil-ira <justthecooldude@gmail.com>
|
||
François
|
73174730e4 |
use the default() method in examples instead of Default::default() (#4952)
# Objective - Use the `..default()` method in examples instead of `..Default::default()` |
||
|
Carter Anderson
|
f487407e07 |
Camera Driven Rendering (#4745)
This adds "high level camera driven rendering" to Bevy. The goal is to give users more control over what gets rendered (and where) without needing to deal with render logic. This will make scenarios like "render to texture", "multiple windows", "split screen", "2d on 3d", "3d on 2d", "pass layering", and more significantly easier. Here is an [example of a 2d render sandwiched between two 3d renders (each from a different perspective)](https://gist.github.com/cart/4fe56874b2e53bc5594a182fc76f4915):  Users can now spawn a camera, point it at a RenderTarget (a texture or a window), and it will "just work". Rendering to a second window is as simple as spawning a second camera and assigning it to a specific window id: ```rust // main camera (main window) commands.spawn_bundle(Camera2dBundle::default()); // second camera (other window) commands.spawn_bundle(Camera2dBundle { camera: Camera { target: RenderTarget::Window(window_id), ..default() }, ..default() }); ``` Rendering to a texture is as simple as pointing the camera at a texture: ```rust commands.spawn_bundle(Camera2dBundle { camera: Camera { target: RenderTarget::Texture(image_handle), ..default() }, ..default() }); ``` Cameras now have a "render priority", which controls the order they are drawn in. If you want to use a camera's output texture as a texture in the main pass, just set the priority to a number lower than the main pass camera (which defaults to `0`). ```rust // main pass camera with a default priority of 0 commands.spawn_bundle(Camera2dBundle::default()); commands.spawn_bundle(Camera2dBundle { camera: Camera { target: RenderTarget::Texture(image_handle.clone()), priority: -1, ..default() }, ..default() }); commands.spawn_bundle(SpriteBundle { texture: image_handle, ..default() }) ``` Priority can also be used to layer to cameras on top of each other for the same RenderTarget. This is what "2d on top of 3d" looks like in the new system: ```rust commands.spawn_bundle(Camera3dBundle::default()); commands.spawn_bundle(Camera2dBundle { camera: Camera { // this will render 2d entities "on top" of the default 3d camera's render priority: 1, ..default() }, ..default() }); ``` There is no longer the concept of a global "active camera". Resources like `ActiveCamera<Camera2d>` and `ActiveCamera<Camera3d>` have been replaced with the camera-specific `Camera::is_active` field. This does put the onus on users to manage which cameras should be active. Cameras are now assigned a single render graph as an "entry point", which is configured on each camera entity using the new `CameraRenderGraph` component. The old `PerspectiveCameraBundle` and `OrthographicCameraBundle` (generic on camera marker components like Camera2d and Camera3d) have been replaced by `Camera3dBundle` and `Camera2dBundle`, which set 3d and 2d default values for the `CameraRenderGraph` and projections. ```rust // old 3d perspective camera commands.spawn_bundle(PerspectiveCameraBundle::default()) // new 3d perspective camera commands.spawn_bundle(Camera3dBundle::default()) ``` ```rust // old 2d orthographic camera commands.spawn_bundle(OrthographicCameraBundle::new_2d()) // new 2d orthographic camera commands.spawn_bundle(Camera2dBundle::default()) ``` ```rust // old 3d orthographic camera commands.spawn_bundle(OrthographicCameraBundle::new_3d()) // new 3d orthographic camera commands.spawn_bundle(Camera3dBundle { projection: OrthographicProjection { scale: 3.0, scaling_mode: ScalingMode::FixedVertical, ..default() }.into(), ..default() }) ``` Note that `Camera3dBundle` now uses a new `Projection` enum instead of hard coding the projection into the type. There are a number of motivators for this change: the render graph is now a part of the bundle, the way "generic bundles" work in the rust type system prevents nice `..default()` syntax, and changing projections at runtime is much easier with an enum (ex for editor scenarios). I'm open to discussing this choice, but I'm relatively certain we will all come to the same conclusion here. Camera2dBundle and Camera3dBundle are much clearer than being generic on marker components / using non-default constructors. If you want to run a custom render graph on a camera, just set the `CameraRenderGraph` component: ```rust commands.spawn_bundle(Camera3dBundle { camera_render_graph: CameraRenderGraph::new(some_render_graph_name), ..default() }) ``` Just note that if the graph requires data from specific components to work (such as `Camera3d` config, which is provided in the `Camera3dBundle`), make sure the relevant components have been added. Speaking of using components to configure graphs / passes, there are a number of new configuration options: ```rust commands.spawn_bundle(Camera3dBundle { camera_3d: Camera3d { // overrides the default global clear color clear_color: ClearColorConfig::Custom(Color::RED), ..default() }, ..default() }) commands.spawn_bundle(Camera3dBundle { camera_3d: Camera3d { // disables clearing clear_color: ClearColorConfig::None, ..default() }, ..default() }) ``` Expect to see more of the "graph configuration Components on Cameras" pattern in the future. By popular demand, UI no longer requires a dedicated camera. `UiCameraBundle` has been removed. `Camera2dBundle` and `Camera3dBundle` now both default to rendering UI as part of their own render graphs. To disable UI rendering for a camera, disable it using the CameraUi component: ```rust commands .spawn_bundle(Camera3dBundle::default()) .insert(CameraUi { is_enabled: false, ..default() }) ``` ## Other Changes * The separate clear pass has been removed. We should revisit this for things like sky rendering, but I think this PR should "keep it simple" until we're ready to properly support that (for code complexity and performance reasons). We can come up with the right design for a modular clear pass in a followup pr. * I reorganized bevy_core_pipeline into Core2dPlugin and Core3dPlugin (and core_2d / core_3d modules). Everything is pretty much the same as before, just logically separate. I've moved relevant types (like Camera2d, Camera3d, Camera3dBundle, Camera2dBundle) into their relevant modules, which is what motivated this reorganization. * I adapted the `scene_viewer` example (which relied on the ActiveCameras behavior) to the new system. I also refactored bits and pieces to be a bit simpler. * All of the examples have been ported to the new camera approach. `render_to_texture` and `multiple_windows` are now _much_ simpler. I removed `two_passes` because it is less relevant with the new approach. If someone wants to add a new "layered custom pass with CameraRenderGraph" example, that might fill a similar niche. But I don't feel much pressure to add that in this pr. * Cameras now have `target_logical_size` and `target_physical_size` fields, which makes finding the size of a camera's render target _much_ simpler. As a result, the `Assets<Image>` and `Windows` parameters were removed from `Camera::world_to_screen`, making that operation much more ergonomic. * Render order ambiguities between cameras with the same target and the same priority now produce a warning. This accomplishes two goals: 1. Now that there is no "global" active camera, by default spawning two cameras will result in two renders (one covering the other). This would be a silent performance killer that would be hard to detect after the fact. By detecting ambiguities, we can provide a helpful warning when this occurs. 2. Render order ambiguities could result in unexpected / unpredictable render results. Resolving them makes sense. ## Follow Up Work * Per-Camera viewports, which will make it possible to render to a smaller area inside of a RenderTarget (great for something like splitscreen) * Camera-specific MSAA config (should use the same "overriding" pattern used for ClearColor) * Graph Based Camera Ordering: priorities are simple, but they make complicated ordering constraints harder to express. We should consider adopting a "graph based" camera ordering model with "before" and "after" relationships to other cameras (or build it "on top" of the priority system). * Consider allowing graphs to run subgraphs from any nest level (aka a global namespace for graphs). Right now the 2d and 3d graphs each need their own UI subgraph, which feels "fine" in the short term. But being able to share subgraphs between other subgraphs seems valuable. * Consider splitting `bevy_core_pipeline` into `bevy_core_2d` and `bevy_core_3d` packages. Theres a shared "clear color" dependency here, which would need a new home. |
||
Mark Schmale
|
1ba7429371 |
Doc/module style doc blocks for examples (#4438)
# Objective Provide a starting point for #3951, or a partial solution. Providing a few comment blocks to discuss, and hopefully find better one in the process. ## Solution Since I am pretty new to pretty much anything in this context, I figured I'd just start with a draft for some file level doc blocks. For some of them I found more relevant details (or at least things I considered interessting), for some others there is less. ## Changelog - Moved some existing comments from main() functions in the 2d examples to the file header level - Wrote some more comment blocks for most other 2d examples TODO: - [x] 2d/sprite_sheet, wasnt able to come up with something good yet - [x] all other example groups... Also: Please let me know if the commit style is okay, or to verbose. I could certainly squash these things, or add more details if needed. I also hope its okay to raise this PR this early, with just a few files changed. Took me long enough and I dont wanted to let it go to waste because I lost motivation to do the whole thing. Additionally I am somewhat uncertain over the style and contents of the commets. So let me know what you thing please. |
||
James Liu
|
31bd4ecbbc |
Mesh Skinning. Attempt #3 (#4238)
# Objective Load skeletal weights and indices from GLTF files. Animate meshes. ## Solution - Load skeletal weights and indices from GLTF files. - Added `SkinnedMesh` component and ` SkinnedMeshInverseBindPose` asset - Added `extract_skinned_meshes` to extract joint matrices. - Added queue phase systems for enqueuing the buffer writes. Some notes: - This ports part of # #2359 to the current main. - This generates new `BufferVec`s and bind groups every frame. The expectation here is that the number of `Query::get` calls during extract is probably going to be the stronger bottleneck, with up to 256 calls per skinned mesh. Until that is optimized, caching buffers and bind groups is probably a non-concern. - Unfortunately, due to the uniform size requirements, this means a 16KB buffer is allocated for every skinned mesh every frame. There's probably a few ways to get around this, but most of them require either compute shaders or storage buffers, which are both incompatible with WebGL2. Co-authored-by: james7132 <contact@jamessliu.com> Co-authored-by: François <mockersf@gmail.com> Co-authored-by: James Liu <contact@jamessliu.com> |
