mirror of
https://github.com/bevyengine/bevy
synced 2024-12-21 02:23:08 +00:00
332 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Patrick Walton
|
37522fd0ae
|
Micro-optimize queue_material_meshes, primarily to remove bit manipulation. (#12791)
This commit makes the following optimizations: ## `MeshPipelineKey`/`BaseMeshPipelineKey` split `MeshPipelineKey` has been split into `BaseMeshPipelineKey`, which lives in `bevy_render` and `MeshPipelineKey`, which lives in `bevy_pbr`. Conceptually, `BaseMeshPipelineKey` is a superclass of `MeshPipelineKey`. For `BaseMeshPipelineKey`, the bits start at the highest (most significant) bit and grow downward toward the lowest bit; for `MeshPipelineKey`, the bits start at the lowest bit and grow upward toward the highest bit. This prevents them from colliding. The goal of this is to avoid having to reassemble bits of the pipeline key for every mesh every frame. Instead, we can just use a bitwise or operation to combine the pieces that make up a `MeshPipelineKey`. ## `specialize_slow` Previously, all of `specialize()` was marked as `#[inline]`. This bloated `queue_material_meshes` unnecessarily, as a large chunk of it ended up being a slow path that was rarely hit. This commit refactors the function to move the slow path to `specialize_slow()`. Together, these two changes shave about 5% off `queue_material_meshes`:  ## Migration Guide - The `primitive_topology` field on `GpuMesh` is now an accessor method: `GpuMesh::primitive_topology()`. - For performance reasons, `MeshPipelineKey` has been split into `BaseMeshPipelineKey`, which lives in `bevy_render`, and `MeshPipelineKey`, which lives in `bevy_pbr`. These two should be combined with bitwise-or to produce the final `MeshPipelineKey`. |
||
Cameron
|
01649f13e2
|
Refactor App and SubApp internals for better separation (#9202)
# Objective This is a necessary precursor to #9122 (this was split from that PR to reduce the amount of code to review all at once). Moving `!Send` resource ownership to `App` will make it unambiguously `!Send`. `SubApp` must be `Send`, so it can't wrap `App`. ## Solution Refactor `App` and `SubApp` to not have a recursive relationship. Since `SubApp` no longer wraps `App`, once `!Send` resources are moved out of `World` and into `App`, `SubApp` will become unambiguously `Send`. There could be less code duplication between `App` and `SubApp`, but that would break `App` method chaining. ## Changelog - `SubApp` no longer wraps `App`. - `App` fields are no longer publicly accessible. - `App` can no longer be converted into a `SubApp`. - Various methods now return references to a `SubApp` instead of an `App`. ## Migration Guide - To construct a sub-app, use `SubApp::new()`. `App` can no longer convert into `SubApp`. - If you implemented a trait for `App`, you may want to implement it for `SubApp` as well. - If you're accessing `app.world` directly, you now have to use `app.world()` and `app.world_mut()`. - `App::sub_app` now returns `&SubApp`. - `App::sub_app_mut` now returns `&mut SubApp`. - `App::get_sub_app` now returns `Option<&SubApp>.` - `App::get_sub_app_mut` now returns `Option<&mut SubApp>.` |
||
|
Patrick Walton
|
4dadebd9c4
|
Improve performance by binning together opaque items instead of sorting them. (#12453)
Today, we sort all entities added to all phases, even the phases that don't strictly need sorting, such as the opaque and shadow phases. This results in a performance loss because our `PhaseItem`s are rather large in memory, so sorting is slow. Additionally, determining the boundaries of batches is an O(n) process. This commit makes Bevy instead applicable place phase items into *bins* keyed by *bin keys*, which have the invariant that everything in the same bin is potentially batchable. This makes determining batch boundaries O(1), because everything in the same bin can be batched. Instead of sorting each entity, we now sort only the bin keys. This drops the sorting time to near-zero on workloads with few bins like `many_cubes --no-frustum-culling`. Memory usage is improved too, with batch boundaries and dynamic indices now implicit instead of explicit. The improved memory usage results in a significant win even on unbatchable workloads like `many_cubes --no-frustum-culling --vary-material-data-per-instance`, presumably due to cache effects. Not all phases can be binned; some, such as transparent and transmissive phases, must still be sorted. To handle this, this commit splits `PhaseItem` into `BinnedPhaseItem` and `SortedPhaseItem`. Most of the logic that today deals with `PhaseItem`s has been moved to `SortedPhaseItem`. `BinnedPhaseItem` has the new logic. Frame time results (in ms/frame) are as follows: | Benchmark | `binning` | `main` | Speedup | | ------------------------ | --------- | ------- | ------- | | `many_cubes -nfc -vpi` | 232.179 | 312.123 | 34.43% | | `many_cubes -nfc` | 25.874 | 30.117 | 16.40% | | `many_foxes` | 3.276 | 3.515 | 7.30% | (`-nfc` is short for `--no-frustum-culling`; `-vpi` is short for `--vary-per-instance`.) --- ## Changelog ### Changed * Render phases have been split into binned and sorted phases. Binned phases, such as the common opaque phase, achieve improved CPU performance by avoiding the sorting step. ## Migration Guide - `PhaseItem` has been split into `BinnedPhaseItem` and `SortedPhaseItem`. If your code has custom `PhaseItem`s, you will need to migrate them to one of these two types. `SortedPhaseItem` requires the fewest code changes, but you may want to pick `BinnedPhaseItem` if your phase doesn't require sorting, as that enables higher performance. ## Tracy graphs `many-cubes --no-frustum-culling`, `main` branch: <img width="1064" alt="Screenshot 2024-03-12 180037" src="https://github.com/bevyengine/bevy/assets/157897/e1180ce8-8e89-46d2-85e3-f59f72109a55"> `many-cubes --no-frustum-culling`, this branch: <img width="1064" alt="Screenshot 2024-03-12 180011" src="https://github.com/bevyengine/bevy/assets/157897/0899f036-6075-44c5-a972-44d95895f46c"> You can see that `batch_and_prepare_binned_render_phase` is a much smaller fraction of the time. Zooming in on that function, with yellow being this branch and red being `main`, we see: <img width="1064" alt="Screenshot 2024-03-12 175832" src="https://github.com/bevyengine/bevy/assets/157897/0dfc8d3f-49f4-496e-8825-a66e64d356d0"> The binning happens in `queue_material_meshes`. Again with yellow being this branch and red being `main`: <img width="1064" alt="Screenshot 2024-03-12 175755" src="https://github.com/bevyengine/bevy/assets/157897/b9b20dc1-11c8-400c-a6cc-1c2e09c1bb96"> We can see that there is a small regression in `queue_material_meshes` performance, but it's not nearly enough to outweigh the large gains in `batch_and_prepare_binned_render_phase`. --------- Co-authored-by: James Liu <contact@jamessliu.com> |
||
JMS55
|
4f20faaa43
|
Meshlet rendering (initial feature) (#10164)
# Objective - Implements a more efficient, GPU-driven (https://github.com/bevyengine/bevy/issues/1342) rendering pipeline based on meshlets. - Meshes are split into small clusters of triangles called meshlets, each of which acts as a mini index buffer into the larger mesh data. Meshlets can be compressed, streamed, culled, and batched much more efficiently than monolithic meshes.   # Misc * Future work: https://github.com/bevyengine/bevy/issues/11518 * Nanite reference: https://advances.realtimerendering.com/s2021/Karis_Nanite_SIGGRAPH_Advances_2021_final.pdf Two pass occlusion culling explained very well: https://medium.com/@mil_kru/two-pass-occlusion-culling-4100edcad501 --------- Co-authored-by: Ricky Taylor <rickytaylor26@gmail.com> Co-authored-by: vero <email@atlasdostal.com> Co-authored-by: François <mockersf@gmail.com> Co-authored-by: atlas dostal <rodol@rivalrebels.com> |
||
LeshaInc
|
737b719dda
|
Add pipeline statistics (#9135)
# Objective It's useful to have access to render pipeline statistics, since they provide more information than FPS alone. For example, the number of drawn triangles can be used to debug culling and LODs. The number of fragment shader invocations can provide a more stable alternative metric than GPU elapsed time. See also: Render node GPU timing overlay #8067, which doesn't provide pipeline statistics, but adds a nice overlay. ## Solution Add `RenderDiagnosticsPlugin`, which enables collecting pipeline statistics and CPU & GPU timings. --- ## Changelog - Add `RenderDiagnosticsPlugin` - Add `RenderContext::diagnostic_recorder` method --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> |
||
robtfm
|
cca4ab3663
|
try_insert NoAutomaticBatching (#12396)
# Objective fix occasional crash from commands.insert when quickly spawning and despawning skinned/morphed meshes ## Solution use `try_insert` instead of `insert`. if the entity is deleted we don't mind failing to add the `NoAutomaticBatching` marker. |
||
James Liu
|
512b7463a3
|
Disentangle bevy_utils/bevy_core's reexported dependencies (#12313)
# Objective Make bevy_utils less of a compilation bottleneck. Tackle #11478. ## Solution * Move all of the directly reexported dependencies and move them to where they're actually used. * Remove the UUID utilities that have gone unused since `TypePath` took over for `TypeUuid`. * There was also a extraneous bytemuck dependency on `bevy_core` that has not been used for a long time (since `encase` became the primary way to prepare GPU buffers). * Remove the `all_tuples` macro reexport from bevy_ecs since it's accessible from `bevy_utils`. --- ## Changelog Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax, smallvec, and thiserror). Removed: bevy_core's reexports of bytemuck. ## Migration Guide bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror have been removed. bevy_core' reexports of bytemuck's types has been removed. Add them as dependencies in your own crate instead. |
||
vero
|
13d37c534f
|
Fix directional light shadow frustum culling near clip plane to infinity (#12342)
# Objective - Fix slightly wrong logic from #11442 - Directional lights should not have a near clip plane ## Solution - Push near clip out to infinity, so that the frustum normal is still available if its needed for whatever reason in shader - also opportunistically nabs a typo |
||
|
Patrick Walton
|
f9cc91d5a1
|
Intern mesh vertex buffer layouts so that we don't have to compare them over and over. (#12216)
Although we cached hashes of `MeshVertexBufferLayout`, we were paying the cost of `PartialEq` on `InnerMeshVertexBufferLayout` for every entity, every frame. This patch changes that logic to place `MeshVertexBufferLayout`s in `Arc`s so that they can be compared and hashed by pointer. This results in a 28% speedup in the `queue_material_meshes` phase of `many_cubes`, with frustum culling disabled. Additionally, this patch contains two minor changes: 1. This commit flattens the specialized mesh pipeline cache to one level of hash tables instead of two. This saves a hash lookup. 2. The example `many_cubes` has been given a `--no-frustum-culling` flag, to aid in benchmarking. See the Tracy profile: <img width="1064" alt="Screenshot 2024-02-29 144406" src="https://github.com/bevyengine/bevy/assets/157897/18632f1d-1fdd-4ac7-90ed-2d10306b2a1e"> ## Migration guide * Duplicate `MeshVertexBufferLayout`s are now combined into a single object, `MeshVertexBufferLayoutRef`, which contains an atomically-reference-counted pointer to the layout. Code that was using `MeshVertexBufferLayout` may need to be updated to use `MeshVertexBufferLayoutRef` instead. |
||
Alice Cecile
|
599e5e4e76
|
Migrate from LegacyColor to bevy_color::Color (#12163)
# Objective - As part of the migration process we need to a) see the end effect of the migration on user ergonomics b) check for serious perf regressions c) actually migrate the code - To accomplish this, I'm going to attempt to migrate all of the remaining user-facing usages of `LegacyColor` in one PR, being careful to keep a clean commit history. - Fixes #12056. ## Solution I've chosen to use the polymorphic `Color` type as our standard user-facing API. - [x] Migrate `bevy_gizmos`. - [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs - [x] Migrate sprites - [x] Migrate UI - [x] Migrate `ColorMaterial` - [x] Migrate `MaterialMesh2D` - [x] Migrate fog - [x] Migrate lights - [x] Migrate StandardMaterial - [x] Migrate wireframes - [x] Migrate clear color - [x] Migrate text - [x] Migrate gltf loader - [x] Register color types for reflection - [x] Remove `LegacyColor` - [x] Make sure CI passes Incidental improvements to ease migration: - added `Color::srgba_u8`, `Color::srgba_from_array` and friends - added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the `Alpha` trait - add and immediately deprecate (lol) `Color::rgb` and friends in favor of more explicit and consistent `Color::srgb` - standardized on white and black for most example text colors - added vector field traits to `LinearRgba`: ~~`Add`, `Sub`, `AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications and divisions do not scale alpha. `Add` and `Sub` have been cut from this PR. - added `LinearRgba` and `Srgba` `RED/GREEN/BLUE` - added `LinearRgba_to_f32_array` and `LinearRgba::to_u32` ## Migration Guide Bevy's color types have changed! Wherever you used a `bevy::render::Color`, a `bevy::color::Color` is used instead. These are quite similar! Both are enums storing a color in a specific color space (or to be more precise, using a specific color model). However, each of the different color models now has its own type. TODO... - `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`, `Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`, `Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`. - `Color::set_a` and `Color::a` is now `Color::set_alpha` and `Color::alpha`. These are part of the `Alpha` trait in `bevy_color`. - `Color::is_fully_transparent` is now part of the `Alpha` trait in `bevy_color` - `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for `g`, `b` `h`, `s` and `l` have been removed due to causing silent relatively expensive conversions. Convert your `Color` into the desired color space, perform your operations there, and then convert it back into a polymorphic `Color` enum. - `Color::hex` is now `Srgba::hex`. Call `.into` or construct a `Color::Srgba` variant manually to convert it. - `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`, `ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now store a `LinearRgba`, rather than a polymorphic `Color` - `Color::rgb_linear` and `Color::rgba_linear` are now `Color::linear_rgb` and `Color::linear_rgba` - The various CSS color constants are no longer stored directly on `Color`. Instead, they're defined in the `Srgba` color space, and accessed via `bevy::color::palettes::css`. Call `.into()` on them to convert them into a `Color` for quick debugging use, and consider using the much prettier `tailwind` palette for prototyping. - The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with the standard naming. - Vector field arithmetic operations on `Color` (add, subtract, multiply and divide by a f32) have been removed. Instead, convert your colors into `LinearRgba` space, and perform your operations explicitly there. This is particularly relevant when working with emissive or HDR colors, whose color channel values are routinely outside of the ordinary 0 to 1 range. - `Color::as_linear_rgba_f32` has been removed. Call `LinearRgba::to_f32_array` instead, converting if needed. - `Color::as_linear_rgba_u32` has been removed. Call `LinearRgba::to_u32` instead, converting if needed. - Several other color conversion methods to transform LCH or HSL colors into float arrays or `Vec` types have been removed. Please reimplement these externally or open a PR to re-add them if you found them particularly useful. - Various methods on `Color` such as `rgb` or `hsl` to convert the color into a specific color space have been removed. Convert into `LinearRgba`, then to the color space of your choice. - Various implicitly-converting color value methods on `Color` such as `r`, `g`, `b` or `h` have been removed. Please convert it into the color space of your choice, then check these properties. - `Color` no longer implements `AsBindGroup`. Store a `LinearRgba` internally instead to avoid conversion costs. --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: Afonso Lage <lage.afonso@gmail.com> Co-authored-by: Rob Parrett <robparrett@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au> |
||
|
JMS55
|
40bfce556a
|
Add random shader utils, fix cluster_debug_visualization (#11956)
# Objective - Partially addresses https://github.com/bevyengine/bevy/issues/11470 (I'd like to add Spatiotemporal Blue Noise in the future, but that's a bit more controversial). - Fix cluster_debug_visualization which has not compiled for a while --- ## Changelog - Added random white noise shader functions to `bevy_pbr::utils` ## Migration Guide - The `bevy_pbr::utils::random1D` shader function has been replaced by the similar `bevy_pbr::utils::rand_f`. |
||
Jan Hohenheim
|
ad5d790e9e
|
Fix WebGL not rendering StandardMaterial (#12110)
# Objective - Fixes #12081 ## Solution Passing the `Affine2` as a neatly packed `mat3x2` breaks WebGL with `drawElementsInstanced: Buffer for uniform block is smaller than UNIFORM_BLOCK_DATA_SIZE.` I fixed this by using a `mat3x3` instead. Alternative solutions that come to mind: - Pass in a `mat3x2` on non-webgl targets and a `mat3x3` otherwise. I guess I could use `#ifdef SIXTEEN_BYTE_ALIGNMENT` for this, but it doesn't seem quite right? This would be more efficient, but decrease code quality. - Do something about `UNIFORM_BLOCK_DATA_SIZE`. I don't know how, so I'd need some guidance here. @superdump let me know if you'd like me to implement other variants. Otherwise, I vote for merging this as a quick fix for `main` and then improving the packing in subsequent PRs :) ## Additional notes Ideally we should merge this before @JMS55 rebases #10164 so that they don't have to rebase everything a second time. |
||
|
James Liu
|
fd91c61d72
|
Cleanup: Use Parallel in extract_meshes (#12084)
# Objective #7348 added `bevy_utils::Parallel` and replaced the usage of the `ThreadLocal<Cell<Vec<...>>>` in `check_visibility`, but we were also using it in `extract_meshes`. ## Solution Refactor the system to use `Parallel` instead. |
||
Alex
|
a7be8a2655
|
Prefer UVec2 when working with texture dimensions (#11698)
# Objective
The physical width and height (pixels) of an image is always integers,
but for `GpuImage` bevy currently stores them as `Vec2` (`f32`).
Switching to `UVec2` makes this more consistent with the [underlying
texture data](https://docs.rs/wgpu/latest/wgpu/struct.Extent3d.html).
I'm not sure if this is worth the change in the surface level API. If
not, feel free to close this PR.
## Solution
- Replace uses of `Vec2` with `UVec2` when referring to texture
dimensions.
- Use integer types for the texture atlas dimensions and sections.
[`Sprite::rect`](
|
||
eri
|
5f8f3b532c
|
Check cfg during CI and fix feature typos (#12103)
# Objective - Add the new `-Zcheck-cfg` checks to catch more warnings - Fixes #12091 ## Solution - Create a new `cfg-check` to the CI that runs `cargo check -Zcheck-cfg --workspace` using cargo nightly (and fails if there are warnings) - Fix all warnings generated by the new check --- ## Changelog - Remove all redundant imports - Fix cfg wasm32 targets - Add 3 dead code exceptions (should StandardColor be unused?) - Convert ios_simulator to a feature (I'm not sure if this is the right way to do it, but the check complained before) ## Migration Guide No breaking changes --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> |
||
|
Alice Cecile
|
de004da8d5
|
Rename bevy_render::Color to LegacyColor (#12069)
# Objective The migration process for `bevy_color` (#12013) will be fairly involved: there will be hundreds of affected files, and a large number of APIs. ## Solution To allow us to proceed granularly, we're going to keep both `bevy_color::Color` (new) and `bevy_render::Color` (old) around until the migration is complete. However, simply doing this directly is confusing! They're both called `Color`, making it very hard to tell when a portion of the code has been ported. As discussed in #12056, by renaming the old `Color` type, we can make it easier to gradually migrate over, one API at a time. ## Migration Guide THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK. This change should not be shipped to end users: delete this section in the final migration guide! --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> |
||
IceSentry
|
e79b9b62ce
|
Make more things pub in the renderer (#12053)
# Objective - Some properties of public types are private but sometimes it's useful to be able to set those ## Solution - Make more stuff pub --- ## Changelog - `MaterialBindGroupId` internal id is now pub and added a new() constructor - `ExtractedPointLight` and `ExtractedDirectionalLight` properties are now all pub --------- Co-authored-by: James Liu <contact@jamessliu.com> |
||
Sam Pettersson
|
caa7ec68d4
|
FIX: iOS Simulator not rendering due to missing CUBE_ARRAY_TEXTURES (#12052)
This PR closes #11978 # Objective Fix rendering on iOS Simulators. iOS Simulator doesn't support the capability CUBE_ARRAY_TEXTURES, since 0.13 this started to make iOS Simulator not render anything with the following message being outputted: ``` 2024-02-19T14:59:34.896266Z ERROR bevy_render::render_resource::pipeline_cache: failed to create shader module: Validation Error Caused by: In Device::create_shader_module Shader validation error: Type [40] '' is invalid Capability Capabilities(CUBE_ARRAY_TEXTURES) is required ``` ## Solution - Split up NO_ARRAY_TEXTURES_SUPPORT into both NO_ARRAY_TEXTURES_SUPPORT and NO_CUBE_ARRAY_TEXTURES_SUPPORT and correctly apply NO_ARRAY_TEXTURES_SUPPORT for iOS Simulator using the cfg flag introduced in #10178. --- ## Changelog ### Fixed - Rendering on iOS Simulator due to missing CUBE_ARRAY_TEXTURES support. --------- Co-authored-by: Sam Pettersson <sam.pettersson@geoguessr.com> |
||
|
IceSentry
|
a513493dcc
|
Make Globals visible in vertex shaders (#12032)
# Objective - Globals are supposed to be available in vertex shader but that was mistakenly removed in 0.13 ## Solution - Configure the visibility of the globals correctly Fixes https://github.com/bevyengine/bevy/issues/12015 |
||
|
Jan Hohenheim
|
8531033b31
|
Add support for KHR_texture_transform (#11904)
Adopted #8266, so copy-pasting the description from there: # Objective Support the KHR_texture_transform extension for the glTF loader. - Fixes #6335 - Fixes #11869 - Implements part of #11350 - Implements the GLTF part of #399 ## Solution As is, this only supports a single transform. Looking at Godot's source, they support one transform with an optional second one for detail, AO, and emission. glTF specifies one per texture. The public domain materials I looked at seem to share the same transform. So maybe having just one is acceptable for now. I tried to include a warning if multiple different transforms exist for the same material. Note the gltf crate doesn't expose the texture transform for the normal and occlusion textures, which it should, so I just ignored those for now. (note by @janhohenheim: this is still the case) Via `cargo run --release --example scene_viewer ~/src/clone/glTF-Sample-Models/2.0/TextureTransformTest/glTF/TextureTransformTest.gltf`:  ## Changelog Support for the [KHR_texture_transform](https://github.com/KhronosGroup/glTF/tree/main/extensions/2.0/Khronos/KHR_texture_transform) extension added. Texture UVs that were scaled, rotated, or offset in a GLTF are now properly handled. --------- Co-authored-by: Al McElrath <hello@yrns.org> Co-authored-by: Kanabenki <lucien.menassol@gmail.com> |
||
Robert Swain
|
1d0ea78f36
|
Save 16 bytes per MeshUniform in uniform/storage buffers (#11999)
# Objective - Save 16 bytes per MeshUniform in uniform/storage buffers. ## Solution - Reorder members of MeshUniform to capitalise on alignment and size rules for tighter data packing. Before the size of a MeshUniform was 160 bytes, and after it is 144 bytes, saving 16 bytes of unused padding for alignment. --- ## Changelog - Reduced the size of MeshUniform by 16 bytes. |
||
|
James Liu
|
6d547d7ce6
|
Allow Mesh-related queue phase systems to parallelize (#11804)
# Objective Partially addresses #3548. `queue_shadows` and `queue_material_meshes` cannot parallelize because of the `ResMut<RenderMeshInstances>` parameter for `queue_material_meshes`. ## Solution Change the `material_bind_group` field to use atomics instead of needing full mutable access. Change the `ResMut` to a `Res`, which should allow both sets of systems to parallelize without issue. ## Performance Tested against `many_foxes`, this has a significant improvement over the entire render schedule. (Yellow is this PR, red is main)  The use of atomics does seem to have a negative effect on `queue_material_meshes` (roughly a 8.29% increase in time spent in the system).  `queue_shadows` seems to be ever so slightly slower (1.6% more time spent) in the system.  `batch_and_prepare_render_phase` seems to be a mix, but overall seems to be slightly *faster* by about 5%.  |
||
|
Patrick Walton
|
3058c17d6a
|
Disable irradiance volumes on WebGL and WebGPU. (#11909)
They cause the number of texture bindings to overflow on those platforms. Ultimately, we shouldn't unconditionally disable them, but this fixes a crash blocking 0.13. Closes #11885. |
||
|
Patrick Walton
|
7883eea54f
|
Add MeshPipelineKey::LIGHTMAPPED as applicable during the shadow map pass. (#11910)
I did this during the prepass, but I neglected to do it during the shadow map pass, causing a panic when directional lights with shadows were enabled with lightmapped meshes present. This patch fixes the issue. Closes #11898. |
||
Robin KAY
|
4ebc560dfb
|
Change MeshUniform::new() to be public. (#11880)
# Objective Provide a public replacement for `Into<MeshUniform>` trait impl which was removed by #10231. I made use of this in the `bevy_mod_outline` crate and will have to duplicate this function if it's not accessible. ## Solution Change the MeshUniform::new() method to be public. |
||
|
robtfm
|
73bf730da9
|
fix shadow batching (#11645)
# Objective `RenderMeshInstance::material_bind_group_id` is only set from `queue_material_meshes::<M>`. this field is used (only) for determining batch groups, so some items may be batched incorrectly if they have never been in the camera's view or if they don't use the Material abstraction. in particular, shadow views render more meshes than the main camera, and currently batch some meshes where the object has never entered the camera view together. this is quite hard to trigger, but should occur in a scene with out-of-view alpha-mask materials (so that the material instance actually affects the shadow) in the path of a light. this is also a footgun for custom pipelines: failing to set the material_bind_group_id will result in all meshes being batched together and all using the closest/furthest material to the camera (depending on sort order). ## Solution - queue_shadows now sets the material_bind_group_id correctly - `MeshPipeline` doesn't attempt to batch meshes if the material_bind_group_id has not been set. custom pipelines still need to set this field to take advantage of batching, but will at least render correctly if it is not set |
||
Doonv
|
1c67e020f7
|
Move EntityHash related types into bevy_ecs (#11498)
# Objective Reduce the size of `bevy_utils` (https://github.com/bevyengine/bevy/issues/11478) ## Solution Move `EntityHash` related types into `bevy_ecs`. This also allows us access to `Entity`, which means we no longer need `EntityHashMap`'s first generic argument. --- ## Changelog - Moved `bevy::utils::{EntityHash, EntityHasher, EntityHashMap, EntityHashSet}` into `bevy::ecs::entity::hash` . - Removed `EntityHashMap`'s first generic argument. It is now hardcoded to always be `Entity`. ## Migration Guide - Uses of `bevy::utils::{EntityHash, EntityHasher, EntityHashMap, EntityHashSet}` now have to be imported from `bevy::ecs::entity::hash`. - Uses of `EntityHashMap` no longer have to specify the first generic parameter. It is now hardcoded to always be `Entity`. |
||
|
Patrick Walton
|
3af8526786
|
Stop extracting mesh entities to the render world. (#11803)
This fixes a `FIXME` in `extract_meshes` and results in a performance improvement. As a result of this change, meshes in the render world might not be attached to entities anymore. Therefore, the `entity` parameter to `RenderCommand::render()` is now wrapped in an `Option`. Most applications that use the render app's ECS can simply unwrap the `Option`. Note that for now sprites, gizmos, and UI elements still use the render world as usual. ## Migration guide * For efficiency reasons, some meshes in the render world may not have corresponding `Entity` IDs anymore. As a result, the `entity` parameter to `RenderCommand::render()` is now wrapped in an `Option`. Custom rendering code may need to be updated to handle the case in which no `Entity` exists for an object that is to be rendered. |
||
|
JMS55
|
f4dab8a4e8
|
Multithreaded render command encoding (#9172)
# Objective - Encoding many GPU commands (such as in a renderpass with many draws, such as the main opaque pass) onto a `wgpu::CommandEncoder` is very expensive, and takes a long time. - To improve performance, we want to perform the command encoding for these heavy passes in parallel. ## Solution - `RenderContext` can now queue up "command buffer generation tasks" which are closures that will generate a command buffer when called. - When finalizing the render context to produce the final list of command buffers, these tasks are run in parallel on the `ComputeTaskPool` to produce their corresponding command buffers. - The general idea is that the node graph will run in serial, but in a node, instead of doing rendering work, you can add tasks to do render work in parallel with other node's tasks that get ran at the end of the graph execution. ## Nodes Parallelized - `MainOpaquePass3dNode` - `PrepassNode` - `DeferredGBufferPrepassNode` - `ShadowPassNode` (One task per view) ## Future Work - For large number of draws calls, might be worth further subdividing passes into 2+ tasks. - Extend this to UI, 2d, transparent, and transmissive nodes? - Needs testing - small command buffers are inefficient - it may be worth reverting to the serial command encoder usage for render phases with few items. - All "serial" (traditional) rendering work must finish before parallel rendering tasks (the new stuff) can start to run. - There is still only one submission to the graphics queue at the end of the graph execution. There is still no ability to submit work earlier. ## Performance Improvement Thanks to @Elabajaba for testing on Bistro.  TLDR: Without shadow mapping, this PR has no impact. _With_ shadow mapping, this PR gives **~40 more fps** than main. --- ## Changelog - `MainOpaquePass3dNode`, `PrepassNode`, `DeferredGBufferPrepassNode`, and each shadow map within `ShadowPassNode` are now encoded in parallel, giving _greatly_ increased CPU performance, mainly when shadow mapping is enabled. - Does not work on WASM or AMD+Windows+Vulkan. - Added `RenderContext::add_command_buffer_generation_task()`. - `RenderContext::new()` now takes adapter info - Some render graph and Node related types and methods now have additional lifetime constraints. ## Migration Guide `RenderContext::new()` now takes adapter info - Some render graph and Node related types and methods now have additional lifetime constraints. --------- Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com> Co-authored-by: François <mockersf@gmail.com> |
||
|
Patrick Walton
|
4c15dd0fc5
|
Implement irradiance volumes. (#10268)
# Objective
Bevy could benefit from *irradiance volumes*, also known as *voxel
global illumination* or simply as light probes (though this term is not
preferred, as multiple techniques can be called light probes).
Irradiance volumes are a form of baked global illumination; they work by
sampling the light at the centers of each voxel within a cuboid. At
runtime, the voxels surrounding the fragment center are sampled and
interpolated to produce indirect diffuse illumination.
## Solution
This is divided into two sections. The first is copied and pasted from
the irradiance volume module documentation and describes the technique.
The second part consists of notes on the implementation.
### Overview
An *irradiance volume* is a cuboid voxel region consisting of
regularly-spaced precomputed samples of diffuse indirect light. They're
ideal if you have a dynamic object such as a character that can move
about
static non-moving geometry such as a level in a game, and you want that
dynamic object to be affected by the light bouncing off that static
geometry.
To use irradiance volumes, you need to precompute, or *bake*, the
indirect
light in your scene. Bevy doesn't currently come with a way to do this.
Fortunately, [Blender] provides a [baking tool] as part of the Eevee
renderer, and its irradiance volumes are compatible with those used by
Bevy.
The [`bevy-baked-gi`] project provides a tool, `export-blender-gi`, that
can
extract the baked irradiance volumes from the Blender `.blend` file and
package them up into a `.ktx2` texture for use by the engine. See the
documentation in the `bevy-baked-gi` project for more details as to this
workflow.
Like all light probes in Bevy, irradiance volumes are 1×1×1 cubes that
can
be arbitrarily scaled, rotated, and positioned in a scene with the
[`bevy_transform::components::Transform`] component. The 3D voxel grid
will
be stretched to fill the interior of the cube, and the illumination from
the
irradiance volume will apply to all fragments within that bounding
region.
Bevy's irradiance volumes are based on Valve's [*ambient cubes*] as used
in
*Half-Life 2* ([Mitchell 2006], slide 27). These encode a single color
of
light from the six 3D cardinal directions and blend the sides together
according to the surface normal.
The primary reason for choosing ambient cubes is to match Blender, so
that
its Eevee renderer can be used for baking. However, they also have some
advantages over the common second-order spherical harmonics approach:
ambient cubes don't suffer from ringing artifacts, they are smaller (6
colors for ambient cubes as opposed to 9 for spherical harmonics), and
evaluation is faster. A smaller basis allows for a denser grid of voxels
with the same storage requirements.
If you wish to use a tool other than `export-blender-gi` to produce the
irradiance volumes, you'll need to pack the irradiance volumes in the
following format. The irradiance volume of resolution *(Rx, Ry, Rz)* is
expected to be a 3D texture of dimensions *(Rx, 2Ry, 3Rz)*. The
unnormalized
texture coordinate *(s, t, p)* of the voxel at coordinate *(x, y, z)*
with
side *S* ∈ *{-X, +X, -Y, +Y, -Z, +Z}* is as follows:
```text
s = x
t = y + ⎰ 0 if S ∈ {-X, -Y, -Z}
⎱ Ry if S ∈ {+X, +Y, +Z}
⎧ 0 if S ∈ {-X, +X}
p = z + ⎨ Rz if S ∈ {-Y, +Y}
⎩ 2Rz if S ∈ {-Z, +Z}
```
Visually, in a left-handed coordinate system with Y up, viewed from the
right, the 3D texture looks like a stacked series of voxel grids, one
for
each cube side, in this order:
| **+X** | **+Y** | **+Z** |
| ------ | ------ | ------ |
| **-X** | **-Y** | **-Z** |
A terminology note: Other engines may refer to irradiance volumes as
*voxel
global illumination*, *VXGI*, or simply as *light probes*. Sometimes
*light
probe* refers to what Bevy calls a reflection probe. In Bevy, *light
probe*
is a generic term that encompasses all cuboid bounding regions that
capture
indirect illumination, whether based on voxels or not.
Note that, if binding arrays aren't supported (e.g. on WebGPU or WebGL
2),
then only the closest irradiance volume to the view will be taken into
account during rendering.
[*ambient cubes*]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Mitchell 2006]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Blender]: http://blender.org/
[baking tool]:
https://docs.blender.org/manual/en/latest/render/eevee/render_settings/indirect_lighting.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
### Implementation notes
This patch generalizes light probes so as to reuse as much code as
possible between irradiance volumes and the existing reflection probes.
This approach was chosen because both techniques share numerous
similarities:
1. Both irradiance volumes and reflection probes are cuboid bounding
regions.
2. Both are responsible for providing baked indirect light.
3. Both techniques involve presenting a variable number of textures to
the shader from which indirect light is sampled. (In the current
implementation, this uses binding arrays.)
4. Both irradiance volumes and reflection probes require gathering and
sorting probes by distance on CPU.
5. Both techniques require the GPU to search through a list of bounding
regions.
6. Both will eventually want to have falloff so that we can smoothly
blend as objects enter and exit the probes' influence ranges. (This is
not implemented yet to keep this patch relatively small and reviewable.)
To do this, we generalize most of the methods in the reflection probes
patch #11366 to be generic over a trait, `LightProbeComponent`. This
trait is implemented by both `EnvironmentMapLight` (for reflection
probes) and `IrradianceVolume` (for irradiance volumes). Using a trait
will allow us to add more types of light probes in the future. In
particular, I highly suspect we will want real-time reflection planes
for mirrors in the future, which can be easily slotted into this
framework.
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
### Added
* A new `IrradianceVolume` asset type is available for baked voxelized
light probes. You can bake the global illumination using Blender or
another tool of your choice and use it in Bevy to apply indirect
illumination to dynamic objects.
|
||
Kanabenki
|
312df3cec7
|
Use warn_once where relevant instead of manually implementing a single warn check (#11693)
# Objective - Some places manually use a `bool` /`AtomicBool` to warn once. ## Solution - Use the `warn_once` macro which internally creates an `AtomicBool`. Downside: in some case the warning state would have been reset after recreating the struct carrying the warn state, whereas now it will always warn only once per program run (For example, if all `MeshPipeline`s are dropped or the `World` is recreated for `Local<bool>`/ a `bool` resource, which shouldn't happen over the course of a standard `App` run). --- ## Changelog ### Removed - `FontAtlasWarning` has been removed, but the corresponding warning is still emitted. |
||
Marco Buono
|
91c467ebfc
|
Gate diffuse and specular transmission behind shader defs (#11627)
# Objective - Address #10338 ## Solution - When implementing specular and diffuse transmission, I inadvertently introduced a performance regression. On high-end hardware it is barely noticeable, but **for lower-end hardware it can be pretty brutal**. If I understand it correctly, this is likely due to use of masking by the GPU to implement control flow, which means that you still pay the price for the branches you don't take; - To avoid that, this PR introduces new shader defs (controlled via `StandardMaterialKey`) that conditionally include the transmission logic, that way the shader code for both types of transmission isn't even sent to the GPU if you're not using them; - This PR also renames ~~`STANDARDMATERIAL_NORMAL_MAP`~~ to `STANDARD_MATERIAL_NORMAL_MAP` for consistency with the naming convention used elsewhere in the codebase. (Drive-by fix) --- ## Changelog - Added new shader defs, set when using transmission in the `StandardMaterial`: - `STANDARD_MATERIAL_SPECULAR_TRANSMISSION`; - `STANDARD_MATERIAL_DIFFUSE_TRANSMISSION`; - `STANDARD_MATERIAL_SPECULAR_OR_DIFFUSE_TRANSMISSION`. - Fixed performance regression caused by the introduction of transmission, by gating transmission shader logic behind the newly introduced shader defs; - Renamed ~~`STANDARDMATERIAL_NORMAL_MAP`~~ to `STANDARD_MATERIAL_NORMAL_MAP` for consistency; ## Migration Guide - If you were using `#ifdef STANDARDMATERIAL_NORMAL_MAP` on your shader code, make sure to update the name to `STANDARD_MATERIAL_NORMAL_MAP`; (with an underscore between `STANDARD` and `MATERIAL`) |
||
Rafał Harabień
|
16ce8c6136
|
Optimize extract_clusters and prepare_clusters systems (#10633)
# Objective When developing my game I realized `extract_clusters` and `prepare_clusters` systems are taking a lot of time despite me creating very little lights. Reducing number of clusters from the default 4096 to 2048 or less greatly improved performance and stabilized FPS (~300 -> 1000+). I debugged it and found out that the main reason for this is cloning `VisiblePointLights` in `extract_clusters` system. It contains light entities grouped by clusters that they affect. The problem is that we clone 4096 (assuming the default clusters configuration) vectors every frame. If many of them happen to be non-empty it starts to be a bottleneck because there is a lot of heap allocation. It wouldn't be a problem if we reused those vectors in following frames but we don't. ## Solution Avoid cloning multiple vectors and instead build a single vector containing data for all clusters. I've recorded a trace in `3d_scene` example with disabled v-sync before and after the change. Mean FPS went from 424 to 990. Mean time for `extract_clusters` system was reduced from 210 us to 24 us and `prepare_clusters` from 189 us to 87 us.  --- ## Changelog - Improved performance of `extract_clusters` and `prepare_clusters` systems for scenes where lights affect a big part of it. |
||
|
vero
|
45967b03b5
|
Fix specular envmap in deferred (#11534)
# Objective - Fixes #11414 ## Solution - Add specular occlusion to g-buffer so PbrInput can be properly reconstructed for shading with a non-zero value allowing the spec envmap to be seen  --------- Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com> |
||
Elabajaba
|
35ac1b152e
|
Update to wgpu 0.19 and raw-window-handle 0.6 (#11280)
# Objective Keep core dependencies up to date. ## Solution Update the dependencies. wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was included in this. The rwh 0.6 version bump is just the simplest way of doing it. There might be a way we can take advantage of wgpu's new safe surface creation api, but I'm not familiar enough with bevy's window management to untangle it and my attempt ended up being a mess of lifetimes and rustc complaining about missing trait impls (that were implemented). Thanks to @MiniaczQ for the (much simpler) rwh 0.6 version bump code. Unblocks https://github.com/bevyengine/bevy/pull/9172 and https://github.com/bevyengine/bevy/pull/10812 ~~This might be blocked on cpal and oboe updating their ndk versions to 0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested on android, and everything seems to work correctly (audio properly stops when minimized, and plays when re-focusing the app). --- ## Changelog - `wgpu` has been updated to 0.19! The long awaited arcanization has been merged (for more info, see https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan should now be working again on Intel GPUs. - Targeting WebGPU now requires that you add the new `webgpu` feature (setting the `RUSTFLAGS` environment variable to `--cfg=web_sys_unstable_apis` is still required). This feature currently overrides the `webgl2` feature if you have both enabled (the `webgl2` feature is enabled by default), so it is not recommended to add it as a default feature to libraries without putting it behind a flag that allows library users to opt out of it! In the future we plan on supporting wasm binaries that can target both webgl2 and webgpu now that wgpu added support for doing so (see https://github.com/bevyengine/bevy/issues/11505). - `raw-window-handle` has been updated to version 0.6. ## Migration Guide - `bevy_render::instance_index::get_instance_index()` has been removed as the webgl2 workaround is no longer required as it was fixed upstream in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed. - WebGPU now requires the new `webgpu` feature to be enabled. The `webgpu` feature currently overrides the `webgl2` feature so you no longer need to disable all default features and re-add them all when targeting `webgpu`, but binaries built with both the `webgpu` and `webgl2` features will only target the webgpu backend, and will only work on browsers that support WebGPU. - Places where you conditionally compiled things for webgl2 need to be updated because of this change, eg: - `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]` becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"), feature = "webgpu"))]` - `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes `#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature = "webgpu")))]` - `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature = "webgpu")))` - `create_texture_with_data` now also takes a `TextureDataOrder`. You can probably just set this to `TextureDataOrder::default()` - `TextureFormat`'s `block_size` has been renamed to `block_copy_size` - See the `wgpu` changelog for anything I might've missed: https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md --------- Co-authored-by: François <mockersf@gmail.com> |
||
|
JMS55
|
a796d53a05
|
Meshlet prep (#11442)
# Objective - Prep for https://github.com/bevyengine/bevy/pull/10164 - Make deferred_lighting_pass_id a ColorAttachment - Correctly extract shadow view frusta so that the view uniforms get populated - Make some needed things public - Misc formatting |
||
|
Alice Cecile
|
eb07d16871
|
Revert rendering-related associated type name changes (#11027)
# Objective > Can anyone explain to me the reasoning of renaming all the types named Query to Data. I'm talking about this PR https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to me that a bunch of types that are used to run queries aren't named Query anymore. Like ViewQuery on the ViewNode is the type of the Query. I don't really understand the point of the rename, it just seems like it hides the fact that a query will run based on those types. [@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387) ## Solution Revert several renames in #10779. ## Changelog - `ViewNode::ViewData` is now `ViewNode::ViewQuery` again. ## Migration Guide - This PR amends the migration guide in https://github.com/bevyengine/bevy/pull/10779 --------- Co-authored-by: atlas dostal <rodol@rivalrebels.com> |
||
re0312
|
04aedf12fa
|
optimize batch_and_prepare_render_phase (#11323)
# Objective - since #9685 ,bevy introduce automatic batching of draw commands, - `batch_and_prepare_render_phase` take the responsibility for batching `phaseItem`, - `GetBatchData` trait is used for indentify each phaseitem how to batch. it defines a associated type `Data `used for Query to fetch data from world. - however,the impl of `GetBatchData ` in bevy always set ` type Data=Entity` then we acually get following code `let entity:Entity =query.get(item.entity())` that cause unnecessary overhead . ## Solution - remove associated type `Data ` and `Filter` from `GetBatchData `, - change the type of the `query_item ` parameter in get_batch_data from` Self::Data` to `Entity`. - `batch_and_prepare_render_phase ` no longer takes a query using `F::Data, F::Filter` - `get_batch_data `now returns `Option<(Self::BufferData, Option<Self::CompareData>)>` --- ## Performance based in main merged with #11290 Window 11 ,Intel 13400kf, NV 4070Ti  frame time from 3.34ms to 3 ms, ~ 10%  `batch_and_prepare_render_phase` from 800us ~ 400 us ## Migration Guide trait `GetBatchData` no longer hold associated type `Data `and `Filter` `get_batch_data` `query_item `type from `Self::Data` to `Entity` and return `Option<(Self::BufferData, Option<Self::CompareData>)>` `batch_and_prepare_render_phase` should not have a query |
||
|
Patrick Walton
|
83d6600267
|
Implement minimal reflection probes (fixed macOS, iOS, and Android). (#11366)
This pull request re-submits #10057, which was backed out for breaking macOS, iOS, and Android. I've tested this version on macOS and Android and on the iOS simulator. # Objective This pull request implements *reflection probes*, which generalize environment maps to allow for multiple environment maps in the same scene, each of which has an axis-aligned bounding box. This is a standard feature of physically-based renderers and was inspired by [the corresponding feature in Blender's Eevee renderer]. ## Solution This is a minimal implementation of reflection probes that allows artists to define cuboid bounding regions associated with environment maps. For every view, on every frame, a system builds up a list of the nearest 4 reflection probes that are within the view's frustum and supplies that list to the shader. The PBR fragment shader searches through the list, finds the first containing reflection probe, and uses it for indirect lighting, falling back to the view's environment map if none is found. Both forward and deferred renderers are fully supported. A reflection probe is an entity with a pair of components, *LightProbe* and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to position it in the world). The *LightProbe* component (along with the *Transform*) defines the bounding region, while the *EnvironmentMapLight* component specifies the associated diffuse and specular cubemaps. A frequent question is "why two components instead of just one?" The advantages of this setup are: 1. It's readily extensible to other types of light probes, in particular *irradiance volumes* (also known as ambient cubes or voxel global illumination), which use the same approach of bounding cuboids. With a single component that applies to both reflection probes and irradiance volumes, we can share the logic that implements falloff and blending between multiple light probes between both of those features. 2. It reduces duplication between the existing *EnvironmentMapLight* and these new reflection probes. Systems can treat environment maps attached to cameras the same way they treat environment maps applied to reflection probes if they wish. Internally, we gather up all environment maps in the scene and place them in a cubemap array. At present, this means that all environment maps must have the same size, mipmap count, and texture format. A warning is emitted if this restriction is violated. We could potentially relax this in the future as part of the automatic mipmap generation work, which could easily do texture format conversion as part of its preprocessing. An easy way to generate reflection probe cubemaps is to bake them in Blender and use the `export-blender-gi` tool that's part of the [`bevy-baked-gi`] project. This tool takes a `.blend` file containing baked cubemaps as input and exports cubemap images, pre-filtered with an embedded fork of the [glTF IBL Sampler], alongside a corresponding `.scn.ron` file that the scene spawner can use to recreate the reflection probes. Note that this is intentionally a minimal implementation, to aid reviewability. Known issues are: * Reflection probes are basically unsupported on WebGL 2, because WebGL 2 has no cubemap arrays. (Strictly speaking, you can have precisely one reflection probe in the scene if you have no other cubemaps anywhere, but this isn't very useful.) * Reflection probes have no falloff, so reflections will abruptly change when objects move from one bounding region to another. * As mentioned before, all cubemaps in the world of a given type (diffuse or specular) must have the same size, format, and mipmap count. Future work includes: * Blending between multiple reflection probes. * A falloff/fade-out region so that reflected objects disappear gradually instead of vanishing all at once. * Irradiance volumes for voxel-based global illumination. This should reuse much of the reflection probe logic, as they're both GI techniques based on cuboid bounding regions. * Support for WebGL 2, by breaking batches when reflection probes are used. These issues notwithstanding, I think it's best to land this with roughly the current set of functionality, because this patch is useful as is and adding everything above would make the pull request significantly larger and harder to review. --- ## Changelog ### Added * A new *LightProbe* component is available that specifies a bounding region that an *EnvironmentMapLight* applies to. The combination of a *LightProbe* and an *EnvironmentMapLight* offers *reflection probe* functionality similar to that available in other engines. [the corresponding feature in Blender's Eevee renderer]: https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html [`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi [glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler |
||
|
JMS55
|
fcd7c0fc3d
|
Exposure settings (adopted) (#11347)
Rebased and finished version of https://github.com/bevyengine/bevy/pull/8407. Huge thanks to @GitGhillie for adjusting all the examples, and the many other people who helped write this PR (@superdump , @coreh , among others) :) Fixes https://github.com/bevyengine/bevy/issues/8369 --- ## Changelog - Added a `brightness` control to `Skybox`. - Added an `intensity` control to `EnvironmentMapLight`. - Added `ExposureSettings` and `PhysicalCameraParameters` for controlling exposure of 3D cameras. - Removed the baked-in `DirectionalLight` exposure Bevy previously hardcoded internally. ## Migration Guide - If using a `Skybox` or `EnvironmentMapLight`, use the new `brightness` and `intensity` controls to adjust their strength. - All 3D scene will now have different apparent brightnesses due to Bevy implementing proper exposure controls. You will have to adjust the intensity of your lights and/or your camera exposure via the new `ExposureSettings` component to compensate. --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: GitGhillie <jillisnoordhoek@gmail.com> Co-authored-by: Marco Buono <thecoreh@gmail.com> Co-authored-by: vero <email@atlasdostal.com> Co-authored-by: atlas dostal <rodol@rivalrebels.com> |
||
Aevyrie
|
839d2f8353
|
Approximate indirect specular occlusion (#11152)
# Objective - The current PBR renderer over-brightens indirect specular reflections, which tends to cause objects to appear to glow, because specular occlusion is not accounted for. ## Solution - Attenuate indirect specular term with an approximation for specular occlusion, using [[Lagarde et al., 2014] (pg. 76)](https://seblagarde.files.wordpress.com/2015/07/course_notes_moving_frostbite_to_pbr_v32.pdf). | Before | After | Animation | | --- | --- | --- | | <img width="1840" alt="before bike" src="https://github.com/bevyengine/bevy/assets/2632925/b6e10d15-a998-4a94-875a-1c2b1e98348a"> | <img width="1840" alt="after bike" src="https://github.com/bevyengine/bevy/assets/2632925/53b1479c-b1e4-427f-b140-53df26ca7193"> |  | | <img width="1840" alt="classroom before" src="https://github.com/bevyengine/bevy/assets/2632925/b16c0e74-741e-4f40-a7df-8863eaa62596"> | <img width="1840" alt="classroom after" src="https://github.com/bevyengine/bevy/assets/2632925/26f9e971-0c63-4ee9-9544-964e5703d65e"> |  | --- ## Changelog - Ambient occlusion now applies to indirect specular reflections to approximate how objects occlude specular light. ## Migration Guide - Renamed `PbrInput::occlusion` to `diffuse_occlusion`, and added `specular_occlusion`. |
||
|
vero
|
4695b82f6b
|
Use EntityHashMap whenever possible (#11353)
# Objective Fixes #11352 ## Solution - Use `EntityHashMap<Entity, T>` instead of `HashMap<Entity, T>` --- ## Changelog Changed - Use `EntityHashMap<Entity, T>` instead of `HashMap<Entity, T>` whenever possible ## Migration Guide TODO |
||
François
|
3d996639a0
|
Revert "Implement minimal reflection probes. (#10057)" (#11307)
# Objective - Fix working on macOS, iOS, Android on main - Fixes #11281 - Fixes #11282 - Fixes #11283 - Fixes #11299 ## Solution - Revert #10057 |
||
Jakob Hellermann
|
a657478675
|
resolve all internal ambiguities (#10411)
- ignore all ambiguities that are not a problem - remove `.before(Assets::<Image>::track_assets),` that points into a different schedule (-> should this be caught?) - add some explicit orderings: - run `poll_receivers` and `update_accessibility_nodes` after `window_closed` in `bevy_winit::accessibility` - run `bevy_ui::accessibility::calc_bounds` after `CameraUpdateSystem` - run ` bevy_text::update_text2d_layout` and `bevy_ui::text_system` after `font_atlas_set::remove_dropped_font_atlas_sets` - add `app.ignore_ambiguity(a, b)` function for cases where you want to ignore an ambiguity between two independent plugins `A` and `B` - add `IgnoreAmbiguitiesPlugin` in `DefaultPlugins` that allows cross-crate ambiguities like `bevy_animation`/`bevy_ui` - Fixes https://github.com/bevyengine/bevy/issues/9511 ## Before **Render**  **PostUpdate**  ## After **Render**  **PostUpdate**  --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: François <mockersf@gmail.com> |
||
|
Patrick Walton
|
54a943d232
|
Implement minimal reflection probes. (#10057)
# Objective This pull request implements *reflection probes*, which generalize environment maps to allow for multiple environment maps in the same scene, each of which has an axis-aligned bounding box. This is a standard feature of physically-based renderers and was inspired by [the corresponding feature in Blender's Eevee renderer]. ## Solution This is a minimal implementation of reflection probes that allows artists to define cuboid bounding regions associated with environment maps. For every view, on every frame, a system builds up a list of the nearest 4 reflection probes that are within the view's frustum and supplies that list to the shader. The PBR fragment shader searches through the list, finds the first containing reflection probe, and uses it for indirect lighting, falling back to the view's environment map if none is found. Both forward and deferred renderers are fully supported. A reflection probe is an entity with a pair of components, *LightProbe* and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to position it in the world). The *LightProbe* component (along with the *Transform*) defines the bounding region, while the *EnvironmentMapLight* component specifies the associated diffuse and specular cubemaps. A frequent question is "why two components instead of just one?" The advantages of this setup are: 1. It's readily extensible to other types of light probes, in particular *irradiance volumes* (also known as ambient cubes or voxel global illumination), which use the same approach of bounding cuboids. With a single component that applies to both reflection probes and irradiance volumes, we can share the logic that implements falloff and blending between multiple light probes between both of those features. 2. It reduces duplication between the existing *EnvironmentMapLight* and these new reflection probes. Systems can treat environment maps attached to cameras the same way they treat environment maps applied to reflection probes if they wish. Internally, we gather up all environment maps in the scene and place them in a cubemap array. At present, this means that all environment maps must have the same size, mipmap count, and texture format. A warning is emitted if this restriction is violated. We could potentially relax this in the future as part of the automatic mipmap generation work, which could easily do texture format conversion as part of its preprocessing. An easy way to generate reflection probe cubemaps is to bake them in Blender and use the `export-blender-gi` tool that's part of the [`bevy-baked-gi`] project. This tool takes a `.blend` file containing baked cubemaps as input and exports cubemap images, pre-filtered with an embedded fork of the [glTF IBL Sampler], alongside a corresponding `.scn.ron` file that the scene spawner can use to recreate the reflection probes. Note that this is intentionally a minimal implementation, to aid reviewability. Known issues are: * Reflection probes are basically unsupported on WebGL 2, because WebGL 2 has no cubemap arrays. (Strictly speaking, you can have precisely one reflection probe in the scene if you have no other cubemaps anywhere, but this isn't very useful.) * Reflection probes have no falloff, so reflections will abruptly change when objects move from one bounding region to another. * As mentioned before, all cubemaps in the world of a given type (diffuse or specular) must have the same size, format, and mipmap count. Future work includes: * Blending between multiple reflection probes. * A falloff/fade-out region so that reflected objects disappear gradually instead of vanishing all at once. * Irradiance volumes for voxel-based global illumination. This should reuse much of the reflection probe logic, as they're both GI techniques based on cuboid bounding regions. * Support for WebGL 2, by breaking batches when reflection probes are used. These issues notwithstanding, I think it's best to land this with roughly the current set of functionality, because this patch is useful as is and adding everything above would make the pull request significantly larger and harder to review. --- ## Changelog ### Added * A new *LightProbe* component is available that specifies a bounding region that an *EnvironmentMapLight* applies to. The combination of a *LightProbe* and an *EnvironmentMapLight* offers *reflection probe* functionality similar to that available in other engines. [the corresponding feature in Blender's Eevee renderer]: https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html [`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi [glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler |
||
|
re0312
|
101037d0c2
|
update Outdated comment (#11243)
# Objective - since #9236 queue_mesh_bind_group has been renamed to prepare_mesh_bind_group,but the comment referring to it has not been updated. . |
||
|
Patrick Walton
|
dd14f3a477
|
Implement lightmaps. (#10231)
 # Objective Lightmaps, textures that store baked global illumination, have been a mainstay of real-time graphics for decades. Bevy currently has no support for them, so this pull request implements them. ## Solution The new `Lightmap` component can be attached to any entity that contains a `Handle<Mesh>` and a `StandardMaterial`. When present, it will be applied in the PBR shader. Because multiple lightmaps are frequently packed into atlases, each lightmap may have its own UV boundaries within its texture. An `exposure` field is also provided, to control the brightness of the lightmap. Note that this PR doesn't provide any way to bake the lightmaps. That can be done with [The Lightmapper] or another solution, such as Unity's Bakery. --- ## Changelog ### Added * A new component, `Lightmap`, is available, for baked global illumination. If your mesh has a second UV channel (UV1), and you attach this component to the entity with that mesh, Bevy will apply the texture referenced in the lightmap. [The Lightmapper]: https://github.com/Naxela/The_Lightmapper --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com> |
||
|
Marco Buono
|
c2ab3a0402
|
Do not load prepass normals for transmissive materials (#11140)
Turns out whenever a normal prepass was active (which includes whenever you use SSAO) we were attempting to read the normals from the prepass for the specular transmissive material. Since transmissive materials don't participate in the prepass (unlike opaque materials) we were reading the normals from “behind” the mesh, producing really weird visual results. # Objective - Fixes #11112. ## Solution - We introduce a new `READS_VIEW_TRANSMISSION_TEXTURE` mesh pipeline key; - We set it whenever the material properties has the `reads_view_transmission_texture` flag set; (i.e. the material is transmissive) - If this key is set we prevent the reading of normals from the prepass, by not setting the `LOAD_PREPASS_NORMALS` shader def. --- ## Changelog ### Fixed - Specular transmissive materials no longer attempt to erroneously load prepass normals, and now work correctly even with the normal prepass active (e.g. when using SSAO) |
||
|
JMS55
|
70b0eacc3b
|
Keep track of when a texture is first cleared (#10325)
# Objective - Custom render passes, or future passes in the engine (such as https://github.com/bevyengine/bevy/pull/10164) need a better way to know and indicate to the core passes whether the view color/depth/prepass attachments have been cleared or not yet this frame, to know if they should clear it themselves or load it. ## Solution - For all render targets (depth textures, shadow textures, prepass textures, main textures) use an atomic bool to track whether or not each texture has been cleared this frame. Abstracted away in the new ColorAttachment and DepthAttachment wrappers. --- ## Changelog - Changed `ViewTarget::get_color_attachment()`, removed arguments. - Changed `ViewTarget::get_unsampled_color_attachment()`, removed arguments. - Removed `Camera3d::clear_color`. - Removed `Camera2d::clear_color`. - Added `Camera::clear_color`. - Added `ExtractedCamera::clear_color`. - Added `ColorAttachment` and `DepthAttachment` wrappers. - Moved `ClearColor` and `ClearColorConfig` from `bevy::core_pipeline::clear_color` to `bevy::render::camera`. - Core render passes now track when a texture is first bound as an attachment in order to decide whether to clear or load it. ## Migration Guide - Remove arguments to `ViewTarget::get_color_attachment()` and `ViewTarget::get_unsampled_color_attachment()`. - Configure clear color on `Camera` instead of on `Camera3d` and `Camera2d`. - Moved `ClearColor` and `ClearColorConfig` from `bevy::core_pipeline::clear_color` to `bevy::render::camera`. - `ViewDepthTexture` must now be created via the `new()` method --------- Co-authored-by: vero <email@atlasdostal.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> |
||
|
JMS55
|
3d3a065820
|
Misc cleanup (#11134)
Re-exports a few types/functions I need that have no reason to be private, and some minor code quality changes. |
||
Tygyh
|
7b8305e5b4
|
Remove unnecessary parens (#11075)
# Objective - Increase readability. ## Solution - Remove unnecessary parens. |
||
Torstein Grindvik
|
16c5a4b7cd
|
Fix BindingType import warning (#10818)
# Objective Fix this warning ``` warning: unused import: `BindingType` --> ...bevy/crates/bevy_pbr/src/render/mesh_view_bindings.rs:23:88 | 23 | BindGroup, BindGroupLayout, BindGroupLayoutEntry, BindGroupLayoutEntryBuilder, BindingType, | ^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default ``` ## Solution - Import via globstar Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com> Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com> |
||
|
Elabajaba
|
70a592f31a
|
Update to wgpu 0.18 (#10266)
# Objective Keep up to date with wgpu. ## Solution Update the wgpu version. Currently blocked on naga_oil updating to naga 0.14 and releasing a new version. 3d scenes (or maybe any scene with lighting?) currently don't render anything due to ``` error: naga_oil bug, please file a report: composer failed to build a valid header: Type [2] '' is invalid = Capability Capabilities(CUBE_ARRAY_TEXTURES) is required ``` I'm not sure what should be passed in for `wgpu::InstanceFlags`, or if we want to make the gles3minorversion configurable (might be useful for debugging?) Currently blocked on https://github.com/bevyengine/naga_oil/pull/63, and https://github.com/gfx-rs/wgpu/issues/4569 to be fixed upstream in wgpu first. ## Known issues Amd+windows+vulkan has issues with texture_binding_arrays (see the image [here](https://github.com/bevyengine/bevy/pull/10266#issuecomment-1819946278)), but that'll be fixed in the next wgpu/naga version, and you can just use dx12 as a workaround for now (Amd+linux mesa+vulkan texture_binding_arrays are fixed though). --- ## Changelog Updated wgpu to 0.18, naga to 0.14.2, and naga_oil to 0.11. - Windows desktop GL should now be less painful as it no longer requires Angle. - You can now toggle shader validation and debug information for debug and release builds using `WgpuSettings.instance_flags` and [InstanceFlags](https://docs.rs/wgpu/0.18.0/wgpu/struct.InstanceFlags.html) ## Migration Guide - `RenderPassDescriptor` `color_attachments` (as well as `RenderPassColorAttachment`, and `RenderPassDepthStencilAttachment`) now use `StoreOp::Store` or `StoreOp::Discard` instead of a `boolean` to declare whether or not they should be stored. - `RenderPassDescriptor` now have `timestamp_writes` and `occlusion_query_set` fields. These can safely be set to `None`. - `ComputePassDescriptor` now have a `timestamp_writes` field. This can be set to `None` for now. - See the [wgpu changelog](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v0180-2023-10-25) for additional details |
||
Mantas
|
5af2f022d8
|
Rename WorldQueryData & WorldQueryFilter to QueryData & QueryFilter (#10779)
# Rename `WorldQueryData` & `WorldQueryFilter` to `QueryData` & `QueryFilter` Fixes #10776 ## Solution Traits `WorldQueryData` & `WorldQueryFilter` were renamed to `QueryData` and `QueryFilter`, respectively. Related Trait types were also renamed. --- ## Changelog - Trait `WorldQueryData` has been renamed to `QueryData`. Derive macro's `QueryData` attribute `world_query_data` has been renamed to `query_data`. - Trait `WorldQueryFilter` has been renamed to `QueryFilter`. Derive macro's `QueryFilter` attribute `world_query_filter` has been renamed to `query_filter`. - Trait's `ExtractComponent` type `Query` has been renamed to `Data`. - Trait's `GetBatchData` types `Query` & `QueryFilter` has been renamed to `Data` & `Filter`, respectively. - Trait's `ExtractInstance` type `Query` has been renamed to `Data`. - Trait's `ViewNode` type `ViewQuery` has been renamed to `ViewData`. - Trait's `RenderCommand` types `ViewWorldQuery` & `ItemWorldQuery` has been renamed to `ViewData` & `ItemData`, respectively. ## Migration Guide Note: if merged before 0.13 is released, this should instead modify the migration guide of #10776 with the updated names. - Rename `WorldQueryData` & `WorldQueryFilter` trait usages to `QueryData` & `QueryFilter` and their respective derive macro attributes `world_query_data` & `world_query_filter` to `query_data` & `query_filter`. - Rename the following trait type usages: - Trait's `ExtractComponent` type `Query` to `Data`. - Trait's `GetBatchData` type `Query` to `Data`. - Trait's `ExtractInstance` type `Query` to `Data`. - Trait's `ViewNode` type `ViewQuery` to `ViewData`' - Trait's `RenderCommand` types `ViewWolrdQuery` & `ItemWorldQuery` to `ViewData` & `ItemData`, respectively. ```rust // Before #[derive(WorldQueryData)] #[world_query_data(derive(Debug))] struct EmptyQuery { empty: (), } // After #[derive(QueryData)] #[query_data(derive(Debug))] struct EmptyQuery { empty: (), } // Before #[derive(WorldQueryFilter)] struct CustomQueryFilter<T: Component, P: Component> { _c: With<ComponentC>, _d: With<ComponentD>, _or: Or<(Added<ComponentC>, Changed<ComponentD>, Without<ComponentZ>)>, _generic_tuple: (With<T>, With<P>), } // After #[derive(QueryFilter)] struct CustomQueryFilter<T: Component, P: Component> { _c: With<ComponentC>, _d: With<ComponentD>, _or: Or<(Added<ComponentC>, Changed<ComponentD>, Without<ComponentZ>)>, _generic_tuple: (With<T>, With<P>), } // Before impl ExtractComponent for ContrastAdaptiveSharpeningSettings { type Query = &'static Self; type Filter = With<Camera>; type Out = (DenoiseCAS, CASUniform); fn extract_component(item: QueryItem<Self::Query>) -> Option<Self::Out> { //... } } // After impl ExtractComponent for ContrastAdaptiveSharpeningSettings { type Data = &'static Self; type Filter = With<Camera>; type Out = (DenoiseCAS, CASUniform); fn extract_component(item: QueryItem<Self::Data>) -> Option<Self::Out> { //... } } // Before impl GetBatchData for MeshPipeline { type Param = SRes<RenderMeshInstances>; type Query = Entity; type QueryFilter = With<Mesh3d>; type CompareData = (MaterialBindGroupId, AssetId<Mesh>); type BufferData = MeshUniform; fn get_batch_data( mesh_instances: &SystemParamItem<Self::Param>, entity: &QueryItem<Self::Query>, ) -> (Self::BufferData, Option<Self::CompareData>) { // .... } } // After impl GetBatchData for MeshPipeline { type Param = SRes<RenderMeshInstances>; type Data = Entity; type Filter = With<Mesh3d>; type CompareData = (MaterialBindGroupId, AssetId<Mesh>); type BufferData = MeshUniform; fn get_batch_data( mesh_instances: &SystemParamItem<Self::Param>, entity: &QueryItem<Self::Data>, ) -> (Self::BufferData, Option<Self::CompareData>) { // .... } } // Before impl<A> ExtractInstance for AssetId<A> where A: Asset, { type Query = Read<Handle<A>>; type Filter = (); fn extract(item: QueryItem<'_, Self::Query>) -> Option<Self> { Some(item.id()) } } // After impl<A> ExtractInstance for AssetId<A> where A: Asset, { type Data = Read<Handle<A>>; type Filter = (); fn extract(item: QueryItem<'_, Self::Data>) -> Option<Self> { Some(item.id()) } } // Before impl ViewNode for PostProcessNode { type ViewQuery = ( &'static ViewTarget, &'static PostProcessSettings, ); fn run( &self, _graph: &mut RenderGraphContext, render_context: &mut RenderContext, (view_target, _post_process_settings): QueryItem<Self::ViewQuery>, world: &World, ) -> Result<(), NodeRunError> { // ... } } // After impl ViewNode for PostProcessNode { type ViewData = ( &'static ViewTarget, &'static PostProcessSettings, ); fn run( &self, _graph: &mut RenderGraphContext, render_context: &mut RenderContext, (view_target, _post_process_settings): QueryItem<Self::ViewData>, world: &World, ) -> Result<(), NodeRunError> { // ... } } // Before impl<P: CachedRenderPipelinePhaseItem> RenderCommand<P> for SetItemPipeline { type Param = SRes<PipelineCache>; type ViewWorldQuery = (); type ItemWorldQuery = (); #[inline] fn render<'w>( item: &P, _view: (), _entity: (), pipeline_cache: SystemParamItem<'w, '_, Self::Param>, pass: &mut TrackedRenderPass<'w>, ) -> RenderCommandResult { // ... } } // After impl<P: CachedRenderPipelinePhaseItem> RenderCommand<P> for SetItemPipeline { type Param = SRes<PipelineCache>; type ViewData = (); type ItemData = (); #[inline] fn render<'w>( item: &P, _view: (), _entity: (), pipeline_cache: SystemParamItem<'w, '_, Self::Param>, pass: &mut TrackedRenderPass<'w>, ) -> RenderCommandResult { // ... } } ``` |
||
|
robtfm
|
67d92e9b85
|
light renderlayers (#10742)
# Objective add `RenderLayers` awareness to lights. lights default to `RenderLayers::layer(0)`, and must intersect the camera entity's `RenderLayers` in order to affect the camera's output. note that lights already use renderlayers to filter meshes for shadow casting. this adds filtering lights per view based on intersection of camera layers and light layers. fixes #3462 ## Solution PointLights and SpotLights are assigned to individual views in `assign_lights_to_clusters`, so we simply cull the lights which don't match the view layers in that function. DirectionalLights are global, so we - add the light layers to the `DirectionalLight` struct - add the view layers to the `ViewUniform` struct - check for intersection before processing the light in `apply_pbr_lighting` potential issue: when mesh/light layers are smaller than the view layers weird results can occur. e.g: camera = layers 1+2 light = layers 1 mesh = layers 2 the mesh does not cast shadows wrt the light as (1 & 2) == 0. the light affects the view as (1+2 & 1) != 0. the view renders the mesh as (1+2 & 2) != 0. so the mesh is rendered and lit, but does not cast a shadow. this could be fixed (so that the light would not affect the mesh in that view) by adding the light layers to the point and spot light structs, but i think the setup is pretty unusual, and space is at a premium in those structs (adding 4 bytes more would reduce the webgl point+spot light max count to 240 from 256). I think typical usage is for cameras to have a single layer, and meshes/lights to maybe have multiple layers to render to e.g. minimaps as well as primary views. if there is a good use case for the above setup and we should support it, please let me know. --- ## Migration Guide Lights no longer affect all `RenderLayers` by default, now like cameras and meshes they default to `RenderLayers::layer(0)`. To recover the previous behaviour and have all lights affect all views, add a `RenderLayers::all()` component to the light entity. |
||
Joona Aalto
|
4b1865f8bd
|
Normalize only nonzero normals for mikktspace normal maps (#10905)
# Objective
Fixes #5891.
For mikktspace normal maps, normals must be renormalized in vertex
shaders to match the way mikktspace bakes vertex tangents and normal
maps so that the exact inverse process is applied when shading.
However, for invalid normals like `vec3<f32>(0.0, 0.0, 0.0)`, this
normalization causes NaN values, and because it's in the vertex shader,
it affects the entire triangle and causes it to be shaded as black:
*A cone with a tip that has a vertex normal of [0, 0, 0], causing the
mesh to be shaded as black.*
In some cases, normals of zero are actually *useful*. For example, a
smoothly shaded cone without creases requires the apex vertex normal to
be zero, because there is no singular normal that works correctly, so
the apex shouldn't contribute to the overall shading. Duplicate vertices
for the apex fix some shading issues, but it causes visible creases and
is more expensive. See #5891 and #10298 for more details.
For correctly shaded cones and other similar low-density shapes with
sharp tips, vertex normals of zero can not be normalized in the vertex
shader.
## Solution
Only normalize the vertex normals and tangents in the vertex shader if
the normal isn't [0, 0, 0]. This way, mikktspace normal maps should
still work for everything except the zero normals, and the zero normals
will only be normalized in the fragment shader.
This allows us to render cones correctly:
Notice how there is still a weird shadow banding effect in one area. I
noticed that it can be fixed by normalizing
[here](
|
||
|
Elabajaba
|
0f5d8128c9
|
Fix prepass binding issues causing crashes when not all prepass bindings are used (#10788)
# Objective Fixes https://github.com/bevyengine/bevy/issues/10786 ## Solution The bind_group_layout entries for the prepass were wrong when not all 4 prepass textures were used, as it just zipped [17, 18, 19, 20] with the smallvec of prepass `bind_group_layout` entries that potentially didn't contain 4 entries. (eg. if you had a depth and motion vector prepass but no normal prepass, then depth would be correct but the entry for the motion vector prepass would be 18 (normal prepass' spot) instead of 19). Change the prepass `get_bind_group_layout_entries` function to return an array of `[Option<BindGroupLayoutEntryBuilder>; 4]` and only add the layout entry if it exists. |
||
|
tygyh
|
fd308571c4
|
Remove unnecessary path prefixes (#10749)
# Objective - Shorten paths by removing unnecessary prefixes ## Solution - Remove the prefixes from many paths which do not need them. Finding the paths was done automatically using built-in refactoring tools in Jetbrains RustRover. |
||
|
JMS55
|
4bf20e7d27
|
Swap material and mesh bind groups (#10485)
# Objective - Materials should be a more frequent rebind then meshes (due to being able to use a single vertex buffer, such as in #10164) and therefore should be in a higher bind group. --- ## Changelog - For 2d and 3d mesh/material setups (but not UI materials, or other rendering setups such as gizmos, sprites, or text), mesh data is now in bind group 1, and material data is now in bind group 2, which is swapped from how they were before. ## Migration Guide - Custom 2d and 3d mesh/material shaders should now use bind group 2 `@group(2) @binding(x)` for their bound resources, instead of bind group 1. - Many internal pieces of rendering code have changed so that mesh data is now in bind group 1, and material data is now in bind group 2. Semi-custom rendering setups (that don't use the Material or Material2d APIs) should adapt to these changes. |
||
|
IceSentry
|
6d0c11a28f
|
Bind group layout entries (#10224)
# Objective
- Follow up to #9694
## Solution
- Same api as #9694 but adapted for `BindGroupLayoutEntry`
- Use the same `ShaderStages` visibilty for all entries by default
- Add `BindingType` helper function that mirror the wgsl equivalent and
that make writing layouts much simpler.
Before:
```rust
let layout = render_device.create_bind_group_layout(&BindGroupLayoutDescriptor {
label: Some("post_process_bind_group_layout"),
entries: &[
BindGroupLayoutEntry {
binding: 0,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Texture {
sample_type: TextureSampleType::Float { filterable: true },
view_dimension: TextureViewDimension::D2,
multisampled: false,
},
count: None,
},
BindGroupLayoutEntry {
binding: 1,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Sampler(SamplerBindingType::Filtering),
count: None,
},
BindGroupLayoutEntry {
binding: 2,
visibility: ShaderStages::FRAGMENT,
ty: BindingType::Buffer {
ty: bevy::render::render_resource::BufferBindingType::Uniform,
has_dynamic_offset: false,
min_binding_size: Some(PostProcessSettings::min_size()),
},
count: None,
},
],
});
```
After:
```rust
let layout = render_device.create_bind_group_layout(
"post_process_bind_group_layout"),
&BindGroupLayoutEntries::sequential(
ShaderStages::FRAGMENT,
(
texture_2d_f32(),
sampler(SamplerBindingType::Filtering),
uniform_buffer(false, Some(PostProcessSettings::min_size())),
),
),
);
```
Here's a more extreme example in bevy_solari:
|
||
Carter Anderson
|
90958104cb
|
Ensure instance_index push constant is always used in prepass.wgsl (#10706)
# Objective Kind of helps #10509 ## Solution Add a line to `prepass.wgsl` that ensure the `instance_index` push constant is always used on WebGL 2. This is not a full fix, as the _second_ a custom shader is used that doesn't use the push constant, the breakage will resurface. We have satisfying medium term and long term solutions. This is just a short term hack for 0.12.1 that will make more cases work. See #10509 for more details. |
||
|
Torstein Grindvik
|
4788315fd0
|
Use as_image_copy where possible (#10733)
# Objective `wgpu` has a helper method `texture.as_image_copy()` for a common pattern when making a default-like `ImageCopyTexture` from a texture. This is used in various places in Bevy for texture copy operations, but it was not used where `write_texture` is called. ## Solution - Replace struct `ImageCopyTexture` initialization with `texture.as_image_copy()` where appropriate Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com> Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com> |
||
|
robtfm
|
ea01c3e387
|
Non uniform transmission samples (#10674)
# Objective fix webgpu+chrome(119) textureSample in non-uniform control flow error ## Solution modify view transmission texture sampling to use textureSampleLevel. there are no mips for the view transmission texture, so this doesn't change the result, but it removes the need for the samples to be in uniform control flow. note: in future we may add a mipchain to the transmission texture to improve the blur effect. if uniformity analysis hasn't improved, this would require switching to manual derivative calculations (which is something we plan to do anyway). |
||
|
Torstein Grindvik
|
719b30a719
|
More inactive camera checks (#10555)
# Objective - Reduce work from inactive cameras Tracing was done on the `3d_shapes` example on PR https://github.com/bevyengine/bevy/pull/10543 . Doing tracing on a "real" application showed more instances of unnecessary work. ## Solution - Skip work on inactive cameras Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com> Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com> |
||
|
robtfm
|
cd594221cf
|
gate depth reads on !WEBGL2 (#10365)
# Objective fix #10364 ## Solution gate depth prepass reads in pbr_transmission.wgsl by `#ifndef WEBGL2` |
||
|
François
|
6f8848a6c2
|
double sided normals: fix apply_normal_mapping calls (#10330)
# Objective - After #10326, examples `array_texture`, `ssao` and `shader_prepass` don't render correctly ``` error: failed to build a valid final module: Entry point fragment at Fragment is invalid ┌─ crates/bevy_pbr/src/render/pbr_prepass.wgsl:26:22 │ 26 │ let normal = evy_pbr::pbr_functions::31mapply_normal_mapping( │ ╭──────────────────────^ 27 │ │ bevy_pbr::pbr_bindings::material.flags, 28 │ │ world_normal, 29 │ │ · │ 36 │ │ 37 │ │ bevy_pbr::mesh_view_bindings::view.mip_bias, │ ╰───────────────────────────────────────────────────────────────────────────────────────^ invalid function call │ = Call to [9] is invalid = Requires 6 arguments, but 4 are provided ``` ## Solution - fix `apply_normal_mapping` calls |
||
|
Marco Buono
|
44928e0df4
|
StandardMaterial Light Transmission (#8015)
# Objective
<img width="1920" alt="Screenshot 2023-04-26 at 01 07 34"
src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png">
This PR adds both diffuse and specular light transmission capabilities
to the `StandardMaterial`, with support for screen space refractions.
This enables realistically representing a wide range of real-world
materials, such as:
- Glass; (Including frosted glass)
- Transparent and translucent plastics;
- Various liquids and gels;
- Gemstones;
- Marble;
- Wax;
- Paper;
- Leaves;
- Porcelain.
Unlike existing support for transparency, light transmission does not
rely on fixed function alpha blending, and therefore works with both
`AlphaMode::Opaque` and `AlphaMode::Mask` materials.
## Solution
- Introduces a number of transmission related fields in the
`StandardMaterial`;
- For specular transmission:
- Adds logic to take a view main texture snapshot after the opaque
phase; (in order to perform screen space refractions)
- Introduces a new `Transmissive3d` phase to the renderer, to which all
meshes with `transmission > 0.0` materials are sent.
- Calculates a light exit point (of the approximate mesh volume) using
`ior` and `thickness` properties
- Samples the snapshot texture with an adaptive number of taps across a
`roughness`-controlled radius enabling “blurry” refractions
- For diffuse transmission:
- Approximates transmitted diffuse light by using a second, flipped +
displaced, diffuse-only Lambertian lobe for each light source.
## To Do
- [x] Figure out where `fresnel_mix()` is taking place, if at all, and
where `dielectric_specular` is being calculated, if at all, and update
them to use the `ior` value (Not a blocker, just a nice-to-have for more
correct BSDF)
- To the _best of my knowledge, this is now taking place, after
|
||
|
Marco Buono
|
dc1f76d9a2
|
Fix handling of double_sided for normal maps (#10326)
# Objective Right now, we flip the `world_normal` in response to `double_sided && !is_front`, however when calculating `N` from tangents and the normal map, we don't flip the normal read from the normal map, which produces extremely weird results. ## Solution - Pass `double_sided` and `is_front` flags to the `apply_normal_mapping()` function and use them to conditionally flip `Nt` ## Comparison Note: These are from a custom scene running with the `transmission` branch, (#8015) I noticed lighting got pretty weird for the back side of translucent `double_sided` materials whenever I added a normal map. ### Before <img width="1392" alt="Screenshot 2023-10-31 at 01 26 06" src="https://github.com/bevyengine/bevy/assets/418473/d5f8c9c3-aca1-4c2f-854d-f0d0fd2fb19a"> ### After <img width="1392" alt="Screenshot 2023-10-31 at 01 25 42" src="https://github.com/bevyengine/bevy/assets/418473/fa0e1aa2-19ad-4c27-bb08-37299d97971c"> --- ## Changelog - Fixed a bug where `StandardMaterial::double_sided` would interact incorrectly with normal maps, producing broken results. |
||
|
Carter Anderson
|
134750d18e
|
Image Sampler Improvements (#10254)
# Objective - Build on the changes in https://github.com/bevyengine/bevy/pull/9982 - Use `ImageSamplerDescriptor` as the "public image sampler descriptor" interface in all places (for consistency) - Make it possible to configure textures to use the "default" sampler (as configured in the `DefaultImageSampler` resource) - Fix a bug introduced in #9982 that prevents configured samplers from being used in Basis, KTX2, and DDS textures --- ## Migration Guide - When using the `Image` API, use `ImageSamplerDescriptor` instead of `wgpu::SamplerDescriptor` - If writing custom wgpu renderer features that work with `Image`, call `&image_sampler.as_wgpu()` to convert to a wgpu descriptor. |
||
Nicola Papale
|
66f72dd25b
|
Use wildcard imports in bevy_pbr (#9847)
# Objective - the style of import used by bevy guarantees merge conflicts when any file change - This is especially true when import lists are large, such as in `bevy_pbr` - Merge conflicts are tricky to resolve. This bogs down rendering PRs and makes contributing to bevy's rendering system more difficult than it needs to ## Solution - Use wildcard imports to replace multiline import list in `bevy_pbr` I suspect this is controversial, but I'd like to hear alternatives. Because this is one of many papercuts that makes developing render features near impossible. |
||
Griffin
|
1bd7e5a8e6
|
View Transformations (#9726)
# Objective - Add functions for common view transformations. --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> |
||
st0rmbtw
|
afe8b5f20d
|
Replace all usages of texture_descritor.size.* with the helper methods (#10227)
# Objective A follow-up PR for https://github.com/bevyengine/bevy/pull/10221 ## Changelog Replaced usages of texture_descriptor.size with the helper methods of `Image` through the entire engine codebase |
||
|
Rafał Harabień
|
51c70bc98c
|
Fix fog color being inaccurate (#10226)
# Objective Fog color was passed to shaders without conversion from sRGB to linear color space. Because shaders expect colors in linear space this resulted in wrong color being used. This is most noticeable in open scenes with dark fog color and clear color set to the same color. In such case background/clear color (which is properly processed) is going to be darker than very far objects. Example:  [bevy-fog-color-bug.zip](https://github.com/bevyengine/bevy/files/13063718/bevy-fog-color-bug.zip) ## Solution Add missing conversion of fog color to linear color space. --- ## Changelog * Fixed conversion of fog color ## Migration Guide - Colors in `FogSettings` struct (`color` and `directional_light_color`) are now sent to the GPU in linear space. If you were using `Color::rgb()`/`Color::rgba()` and would like to retain the previous colors, you can quickly fix it by switching to `Color::rgb_linear()`/`Color::rgba_linear()`. |
||
|
Marco Buono
|
e59085a67f
|
Use “specular occlusion” term to consistently extinguish fresnel on Ambient and Environment Map lights (#10182)
# Objective
Even at `reflectance == 0.0`, our ambient and environment map light
implementations still produce fresnel/specular highlights.
Such a low `reflectance` value lies outside of the physically possible
range and is already used by our directional, point and spot light
implementations (via the `fresnel()` function) to enable artistic
control, effectively disabling the fresnel "look" for non-physically
realistic materials. Since ambient and environment lights use a
different formulation, they were not honoring this same principle.
This PR aims to bring consistency to all light types, offering the same
fresnel extinguishing control to ambient and environment lights.
Thanks to `@nathanf` for [pointing
out](https://discord.com/channels/691052431525675048/743663924229963868/1164083373514440744)
the [Filament docs section about
this](https://google.github.io/filament/Filament.md.html#lighting/occlusion/specularocclusion).
## Solution
- We use [the same
formulation](
|
||
|
robtfm
|
6f2a5cb862
|
Bind group entries (#9694)
# Objective Simplify bind group creation code. alternative to (and based on) #9476 ## Solution - Add a `BindGroupEntries` struct that can transparently be used where `&[BindGroupEntry<'b>]` is required in BindGroupDescriptors. Allows constructing the descriptor's entries as: ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &BindGroupEntries::with_indexes(( (2, &my_sampler), (3, my_uniform), )), ); ``` instead of ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &[ BindGroupEntry { binding: 2, resource: BindingResource::Sampler(&my_sampler), }, BindGroupEntry { binding: 3, resource: my_uniform, }, ], ); ``` or ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &BindGroupEntries::sequential((&my_sampler, my_uniform)), ); ``` instead of ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &[ BindGroupEntry { binding: 0, resource: BindingResource::Sampler(&my_sampler), }, BindGroupEntry { binding: 1, resource: my_uniform, }, ], ); ``` the structs has no user facing macros, is tuple-type-based so stack allocated, and has no noticeable impact on compile time. - Also adds a `DynamicBindGroupEntries` struct with a similar api that uses a `Vec` under the hood and allows extending the entries. - Modifies `RenderDevice::create_bind_group` to take separate arguments `label`, `layout` and `entries` instead of a `BindGroupDescriptor` struct. The struct can't be stored due to the internal references, and with only 3 members arguably does not add enough context to justify itself. - Modify the codebase to use the new api and the `BindGroupEntries` / `DynamicBindGroupEntries` structs where appropriate (whenever the entries slice contains more than 1 member). ## Migration Guide - Calls to `RenderDevice::create_bind_group({BindGroupDescriptor { label, layout, entries })` must be amended to `RenderDevice::create_bind_group(label, layout, entries)`. - If `label`s have been specified as `"bind_group_name".into()`, they need to change to just `"bind_group_name"`. `Some("bind_group_name")` and `None` will still work, but `Some("bind_group_name")` can optionally be simplified to just `"bind_group_name"`. --------- Co-authored-by: IceSentry <IceSentry@users.noreply.github.com> |
||
|
robtfm
|
61bad4eb57
|
update shader imports (#10180)
# Objective
- bump naga_oil to 0.10
- update shader imports to use rusty syntax
## Migration Guide
naga_oil 0.10 reworks the import mechanism to support more syntax to
make it more rusty, and test for item use before importing to determine
which imports are modules and which are items, which allows:
- use rust-style imports
```
#import bevy_pbr::{
pbr_functions::{alpha_discard as discard, apply_pbr_lighting},
mesh_bindings,
}
```
- import partial paths:
```
#import part::of::path
...
path::remainder::function();
```
which will call to `part::of::path::remainder::function`
- use fully qualified paths without importing:
```
// #import bevy_pbr::pbr_functions
bevy_pbr::pbr_functions::pbr()
```
- use imported items without qualifying
```
#import bevy_pbr::pbr_functions::pbr
// for backwards compatibility the old style is still supported:
// #import bevy_pbr::pbr_functions pbr
...
pbr()
```
- allows most imported items to end with `_` and numbers (naga_oil#30).
still doesn't allow struct members to end with `_` or numbers but it's
progress.
- the vast majority of existing shader code will work without changes,
but will emit "deprecated" warnings for old-style imports. these can be
suppressed with the `allow-deprecated` feature.
- partly breaks overrides (as far as i'm aware nobody uses these yet) -
now overrides will only be applied if the overriding module is added as
an additional import in the arguments to `Composer::make_naga_module` or
`Composer::add_composable_module`. this is necessary to support
determining whether imports are modules or items.
|
||
|
Marco Buono
|
9b80205acb
|
Variable MeshPipeline View Bind Group Layout (#10156)
# Objective This PR aims to make it so that we don't accidentally go over `MAX_TEXTURE_IMAGE_UNITS` (in WebGL) or `maxSampledTexturesPerShaderStage` (in WebGPU), giving us some extra leeway to add more view bind group textures. (This PR is extracted from—and unblocks—#8015) ## Solution - We replace the existing `view_layout` and `view_layout_multisampled` pair with an array of 32 bind group layouts, generated ahead of time; - For now, these layouts cover all the possible combinations of: `multisampled`, `depth_prepass`, `normal_prepass`, `motion_vector_prepass` and `deferred_prepass`: - In the future, as @JMS55 pointed out, we can likely take out `motion_vector_prepass` and `deferred_prepass`, as these are not really needed for the mesh pipeline and can use separate pipelines. This would bring the possible combinations down to 8; - We can also add more "optional" textures as they become needed, allowing the engine to scale to a wider variety of use cases in lower end/web environments (e.g. some apps might just want normal and depth prepasses, others might only want light probes), while still keeping a high ceiling for high end native environments where more textures are supported. - While preallocating bind group layouts is relatively cheap, the number of combinations grows exponentially, so we should likely limit ourselves to something like at most 256–1024 total layouts until we find a better solution (like generating them lazily) - To make this mechanism a little bit more explicit/discoverable, so that compatibility with WebGPU/WebGL is not broken by accident, we add a `MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` const and warn whenever the number of textures in the layout crosses it. - The warning is gated by `#[cfg(debug_assertions)]` and not issued in release builds; - We're counting the actual textures in the bind group layout instead of using some roundabout metric so it should be accurate; - Right now `MESH_PIPELINE_VIEW_LAYOUT_SAFE_MAX_TEXTURES` is set to 10 in order to leave 6 textures free for other groups; - Currently there's no combination that would cause us to go over the limit, but that will change once #8015 lands. --- ## Changelog - `MeshPipeline` view bind group layouts now vary based on the current multisampling and prepass states, saving a couple of texture binding entries when prepasses are not in use. ## Migration Guide - `MeshPipeline::view_layout` and `MeshPipeline::view_layout_multisampled` have been replaced with a private array to accomodate for variable view bind group layouts. To obtain a view bind group layout for the current pipeline state, use the new `MeshPipeline::get_view_layout()` or `MeshPipeline::get_view_layout_from_key()` methods. |
||
|
robtfm
|
c99351f7c2
|
allow extensions to StandardMaterial (#7820)
# Objective allow extending `Material`s (including the built in `StandardMaterial`) with custom vertex/fragment shaders and additional data, to easily get pbr lighting with custom modifications, or otherwise extend a base material. # Solution - added `ExtendedMaterial<B: Material, E: MaterialExtension>` which contains a base material and a user-defined extension. - added example `extended_material` showing how to use it - modified AsBindGroup to have "unprepared" functions that return raw resources / layout entries so that the extended material can combine them note: doesn't currently work with array resources, as i can't figure out how to make the OwnedBindingResource::get_binding() work, as wgpu requires a `&'a[&'a TextureView]` and i have a `Vec<TextureView>`. # Migration Guide manual implementations of `AsBindGroup` will need to be adjusted, the changes are pretty straightforward and can be seen in the diff for e.g. the `texture_binding_array` example. --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> |
||
|
Marco Buono
|
5733d2403e
|
*_PREPASS Shader Def Cleanup (#10136)
# Objective - This PR aims to make the various `*_PREPASS` shader defs we have (`NORMAL_PREPASS`, `DEPTH_PREPASS`, `MOTION_VECTORS_PREPASS` AND `DEFERRED_PREPASS`) easier to use and understand: - So that their meaning is now consistent across all contexts; (“prepass X is enabled for the current view”) - So that they're also consistently set across all contexts. - It also aims to enable us to (with a follow up PR) to conditionally gate the `BindGroupEntry` and `BindGroupLayoutEntry` items associated with these prepasses, saving us up to 4 texture slots in WebGL (currently globally limited to 16 per shader, regardless of bind groups) ## Solution - We now consistently set these from `PrepassPipeline`, the `MeshPipeline` and the `DeferredLightingPipeline`, we also set their `MeshPipelineKey`s; - We introduce `PREPASS_PIPELINE`, `MESH_PIPELINE` and `DEFERRED_LIGHTING_PIPELINE` that can be used to detect where the code is running, without overloading the meanings of the prepass shader defs; - We also gate the WGSL functions in `bevy_pbr::prepass_utils` with `#ifdef`s for their respective shader defs, so that shader code can provide a fallback whenever they're not available. - This allows us to conditionally include the bindings for these prepass textures (My next PR, which will hopefully unblock #8015) - @robtfm mentioned [these were being used to prevent accessing the same binding as read/write in the prepass](https://discord.com/channels/691052431525675048/743663924229963868/1163270458393759814), however even after reversing the `#ifndef`s I had no issues running the code, so perhaps the compiler is already smart enough even without tree shaking to know they're not being used, thanks to `#ifdef PREPASS_PIPELINE`? ## Comparison ### Before | Shader Def | `PrepassPipeline` | `MeshPipeline` | `DeferredLightingPipeline` | | ------------------------ | ----------------- | -------------- | -------------------------- | | `NORMAL_PREPASS` | Yes | No | No | | `DEPTH_PREPASS` | Yes | No | No | | `MOTION_VECTORS_PREPASS` | Yes | No | No | | `DEFERRED_PREPASS` | Yes | No | No | | View Key | `PrepassPipeline` | `MeshPipeline` | `DeferredLightingPipeline` | | ------------------------ | ----------------- | -------------- | -------------------------- | | `NORMAL_PREPASS` | Yes | Yes | No | | `DEPTH_PREPASS` | Yes | No | No | | `MOTION_VECTORS_PREPASS` | Yes | No | No | | `DEFERRED_PREPASS` | Yes | Yes\* | No | \* Accidentally was being set twice, once with only `deferred_prepass.is_some()` as a condition, and once with `deferred_p repass.is_some() && !forward` as a condition. ### After | Shader Def | `PrepassPipeline` | `MeshPipeline` | `DeferredLightingPipeline` | | ---------------------------- | ----------------- | --------------- | -------------------------- | | `NORMAL_PREPASS` | Yes | Yes | Yes | | `DEPTH_PREPASS` | Yes | Yes | Yes | | `MOTION_VECTORS_PREPASS` | Yes | Yes | Yes | | `DEFERRED_PREPASS` | Yes | Yes | Unconditionally | | `PREPASS_PIPELINE` | Unconditionally | No | No | | `MESH_PIPELINE` | No | Unconditionally | No | | `DEFERRED_LIGHTING_PIPELINE` | No | No | Unconditionally | | View Key | `PrepassPipeline` | `MeshPipeline` | `DeferredLightingPipeline` | | ------------------------ | ----------------- | -------------- | -------------------------- | | `NORMAL_PREPASS` | Yes | Yes | Yes | | `DEPTH_PREPASS` | Yes | Yes | Yes | | `MOTION_VECTORS_PREPASS` | Yes | Yes | Yes | | `DEFERRED_PREPASS` | Yes | Yes | Unconditionally | --- ## Changelog - Cleaned up WGSL `*_PREPASS` shader defs so they're now consistently used everywhere; - Introduced `PREPASS_PIPELINE`, `MESH_PIPELINE` and `DEFERRED_LIGHTING_PIPELINE` WGSL shader defs for conditionally compiling logic based the current pipeline; - WGSL functions from `bevy_pbr::prepass_utils` are now guarded with `#ifdef` based on the currently enabled prepasses; ## Migration Guide - When using functions from `bevy_pbr::prepass_utils` (`prepass_depth()`, `prepass_normal()`, `prepass_motion_vector()`) in contexts where these prepasses might be disabled, you should now wrap your calls with the appropriate `#ifdef` guards, (`#ifdef DEPTH_PREPASS`, `#ifdef NORMAL_PREPASS`, `#ifdef MOTION_VECTOR_PREPASS`) providing fallback logic where applicable. --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com> Co-authored-by: IceSentry <IceSentry@users.noreply.github.com> |
||
|
Griffin
|
490699c311
|
Fix unlit missing parameters (#10144)
# Objective - The refactoring in https://github.com/bevyengine/bevy/pull/10105 missed including the frag_coord and normal in pbr_input. ## Solution - Add them back |
||
|
robtfm
|
d9a0761eb2
|
ssao use unlit_color instead of white (#10117)
# Objective #10105 changed the ssao input color from the material base color to white. i can't actually see a difference in the example but there should be one in some cases. ## Solution change it back. |
||
|
robtfm
|
979c4094d4
|
pbr shader cleanup (#10105)
# Objective cleanup some pbr shader code. improve shader stage io consistency and make pbr.wgsl (probably many people's first foray into bevy shader code) a little more human-readable. also fix a couple of small issues with deferred rendering. ## Solution mesh_vertex_output: - rename to forward_io (to align with prepass_io) - rename `MeshVertexOutput` to `VertexOutput` (to align with prepass_io) - move `Vertex` from mesh.wgsl into here (to align with prepass_io) prepass_io: - remove `FragmentInput`, use `VertexOutput` directly (to align with forward_io) - rename `VertexOutput::clip_position` to `position` (to align with forward_io) pbr.wgsl: - restructure so we don't need `#ifdefs` on the actual entrypoint, use VertexOutput and FragmentOutput in all cases and use #ifdefs to import the right struct definitions. - rearrange to make the flow clearer - move alpha_discard up from `pbr_functions::pbr` to avoid needing to call it on some branches and not others - add a bunch of comments deferred_lighting: - move ssao into the `!unlit` block to reflect forward behaviour correctly - fix compile error with deferred + premultiply_alpha ## Migration Guide in custom material shaders: - `pbr_functions::pbr` no longer calls to `pbr_functions::alpha_discard`. if you were using the `pbr` function in a custom shader with alpha mask mode you now also need to call alpha_discard manually - rename imports of `bevy_pbr::mesh_vertex_output` to `bevy_pbr::forward_io` - rename instances of `MeshVertexOutput` to `VertexOutput` in custom material prepass shaders: - rename instances of `VertexOutput::clip_position` to `VertexOutput::position` |
||
|
IceSentry
|
068e42a01f
|
Configurable colors for wireframe (#5303)
# Objective - Make the wireframe colors configurable at the global level and the single mesh level - Based on https://github.com/bevyengine/bevy/pull/5314 This video shows what happens when playing with various settings from the example https://github.com/bevyengine/bevy/assets/8348954/1ee9aee0-fab7-4da8-bc5d-8d0562bb34e6 ## Solution - Add a `color` field to the `WireframeMaterial` - Use a `WireframeColor` component to configure the color per entity - Add a `default_color` field to `WireframeConfig` for global wireframes or wireframes with no specified color. ## Notes - Most of the docs and the general idea for `WireframeColor` came from [UberLambda](https://github.com/UberLambda) in #3677 but the code ended up completely different so I created a separate branch. ~~I'm not sure how to correctly credit them on this PR.~~ (I re-created the commit but I added them as co-author in the commit message) ~~Closes https://github.com/bevyengine/bevy/pull/3677~~ ~~Closes https://github.com/bevyengine/bevy/pull/5301~~ ~~https://github.com/bevyengine/bevy/pull/5314 should be merged before this PR.~~ |
||
|
Griffin
|
a15d152635
|
Deferred Renderer (#9258)
# Objective - Add a [Deferred Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy. - This allows subsequent passes to access per pixel material information before/during shading. - Accessing this per pixel material information is needed for some features, like GI. It also makes other features (ex. Decals) simpler to implement and/or improves their capability. There are multiple approaches to accomplishing this. The deferred shading approach works well given the limitations of WebGPU and WebGL2. Motivation: [I'm working on a GI solution for Bevy](https://youtu.be/eH1AkL-mwhI) # Solution - The deferred renderer is implemented with a prepass and a deferred lighting pass. - The prepass renders opaque objects into the Gbuffer attachment (`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same way as the forward implementation and then [packs it into the Gbuffer]( |
||
|
IceSentry
|
e05a9f9315
|
use Material for wireframes (#5314)
# Objective - Use the `Material` abstraction for the Wireframes - Right now this doesn't have many benefits other than simplifying some of the rendering code - We can reuse the default vertex shader and avoid rendering inconsistencies - The goal is to have a material with a color on each mesh so this approach will make it easier to implement - Originally done in https://github.com/bevyengine/bevy/pull/5303 but I decided to split the Material part to it's own PR and then adding per-entity colors and globally configurable colors will be a much simpler diff. ## Solution - Use the new `Material` abstraction for the Wireframes ## Notes It's possible this isn't ideal since this adds a `Handle<WireframeMaterial>` to all the meshes compared to the original approach that didn't need anything. I didn't notice any performance impact on my machine. This might be a surprising usage of `Material` at first, because intuitively you only have one material per mesh, but the way it's implemented you can have as many different types of materials as you want on a mesh. ## Migration Guide `WireframePipeline` was removed. If you were using it directly, please create an issue explaining your use case. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> |
||
|
Elabajaba
|
78e4bb2c2a
|
fix webgl2 crash (#10053)
# Objective Webgl2 broke when pcf was merged. Fixes #10048 ## Solution Change the `textureSampleCompareLevel` in shadow_sampling.wgsl to `textureSampleCompare` to make it work again. |
||
|
JMS55
|
1f95a484ed
|
PCF For DirectionalLight/SpotLight Shadows (#8006)
# Objective - Improve antialiasing for non-point light shadow edges. - Very partially addresses https://github.com/bevyengine/bevy/issues/3628. ## Solution - Implements "The Witness"'s shadow map sampling technique. - Ported from @superdump's old branch, all credit to them :) - Implements "Call of Duty: Advanced Warfare"'s stochastic shadow map sampling technique when the velocity prepass is enabled, for use with TAA. - Uses interleaved gradient noise to generate a random angle, and then averages 8 samples in a spiral pattern, rotated by the random angle. - I also tried spatiotemporal blue noise, but it was far too noisy to be filtered by TAA alone. In the future, we should try spatiotemporal blue noise + a specialized shadow denoiser such as https://gpuopen.com/fidelityfx-denoiser/#shadow. This approach would also be useful for hybrid rasterized applications with raytraced shadows. - The COD presentation has an interesting temporal dithering of the noise for use with temporal supersampling that we should revisit when we get DLSS/FSR/other TSR. --- ## Changelog * Added `ShadowFilteringMethod`. Improved directional light and spotlight shadow edges to be less aliased. ## Migration Guide * Shadows cast by directional lights or spotlights now have smoother edges. To revert to the old behavior, add `ShadowFilteringMethod::Hardware2x2` to your cameras. --------- Co-authored-by: IceSentry <c.giguere42@gmail.com> Co-authored-by: Daniel Chia <danstryder@gmail.com> Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com> Co-authored-by: Brandon Dyer <brandondyer64@gmail.com> Co-authored-by: Edgar Geier <geieredgar@gmail.com> Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com> Co-authored-by: IceSentry <IceSentry@users.noreply.github.com> |
||
|
François
|
9086e60c20
|
wireframes: workaround for DX12 (#10022)
# Objective - Fixes #10019 ## Solution - Uses a workaround for DX12 |
||
|
Patrick Walton
|
44a9a4cc86
|
Import the second UV map if present in glTF files. (#9992)
Conventionally, the second UV map (`TEXCOORD1`, `UV1`) is used for lightmap UVs. This commit allows Bevy to import them, so that a custom shader that applies lightmaps can use those UVs if desired. Note that this doesn't actually apply lightmaps to Bevy meshes; that will be a followup. It does, however, open the door to future Bevy plugins that implement baked global illumination. ## Changelog ### Added The Bevy glTF loader now imports a second UV channel (`TEXCOORD1`, `UV1`) from meshes if present. This can be used by custom shaders to implement lightmapping. |
||
|
James Liu
|
21518de0de
|
refactor: Change Option<With<T>> query params to Has<T> (#9959)
# Objective `Has<T>` was added to bevy_ecs, but we're still using the `Option<With<T>>` pattern in multiple locations. ## Solution Replace them with `Has<T>`. |
||
|
James Liu
|
a1a81e5721
|
Parallelize extract_meshes (#9966)
# Objective `extract_meshes` can easily be one of the most expensive operations in the blocking extract schedule for 3D apps. It also has no fundamentally serialized parts and can easily be run across multiple threads. Let's speed it up by parallelizing it! ## Solution Use the `ThreadLocal<Cell<Vec<T>>>` approach utilized by #7348 in conjunction with `Query::par_iter` to build a set of thread-local queues, and collect them after going wide. ## Performance Using `cargo run --profile stress-test --features trace_tracy --example many_cubes`. Yellow is this PR. Red is main. `extract_meshes`:  An average reduction from 1.2ms to 770us is seen, a 41.6% improvement. Note: this is still not including #9950's changes, so this may actually result in even faster speedups once that's merged in. |
||
|
Robert Swain
|
b6ead2be95
|
Use EntityHashMap<Entity, T> for render world entity storage for better performance (#9903)
# Objective - Improve rendering performance, particularly by avoiding the large system commands costs of using the ECS in the way that the render world does. ## Solution - Define `EntityHasher` that calculates a hash from the `Entity.to_bits()` by `i | (i.wrapping_mul(0x517cc1b727220a95) << 32)`. `0x517cc1b727220a95` is something like `u64::MAX / N` for N that gives a value close to π and that works well for hashing. Thanks for @SkiFire13 for the suggestion and to @nicopap for alternative suggestions and discussion. This approach comes from `rustc-hash` (a.k.a. `FxHasher`) with some tweaks for the case of hashing an `Entity`. `FxHasher` and `SeaHasher` were also tested but were significantly slower. - Define `EntityHashMap` type that uses the `EntityHashser` - Use `EntityHashMap<Entity, T>` for render world entity storage, including: - `RenderMaterialInstances` - contains the `AssetId<M>` of the material associated with the entity. Also for 2D. - `RenderMeshInstances` - contains mesh transforms, flags and properties about mesh entities. Also for 2D. - `SkinIndices` and `MorphIndices` - contains the skin and morph index for an entity, respectively - `ExtractedSprites` - `ExtractedUiNodes` ## Benchmarks All benchmarks have been conducted on an M1 Max connected to AC power. The tests are run for 1500 frames. The 1000th frame is captured for comparison to check for visual regressions. There were none. ### 2D Meshes `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d` #### `--ordered-z` This test spawns the 2D meshes with z incrementing back to front, which is the ideal arrangement allocation order as it matches the sorted render order which means lookups have a high cache hit rate. <img width="1112" alt="Screenshot 2023-09-27 at 07 50 45" src="https://github.com/bevyengine/bevy/assets/302146/e140bc98-7091-4a3b-8ae1-ab75d16d2ccb"> -39.1% median frame time. #### Random This test spawns the 2D meshes with random z. This not only makes the batching and transparent 2D pass lookups get a lot of cache misses, it also currently means that the meshes are almost certain to not be batchable. <img width="1108" alt="Screenshot 2023-09-27 at 07 51 28" src="https://github.com/bevyengine/bevy/assets/302146/29c2e813-645a-43ce-982a-55df4bf7d8c4"> -7.2% median frame time. ### 3D Meshes `many_cubes --benchmark` <img width="1112" alt="Screenshot 2023-09-27 at 07 51 57" src="https://github.com/bevyengine/bevy/assets/302146/1a729673-3254-4e2a-9072-55e27c69f0fc"> -7.7% median frame time. ### Sprites **NOTE: On `main` sprites are using `SparseSet<Entity, T>`!** `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite` #### `--ordered-z` This test spawns the sprites with z incrementing back to front, which is the ideal arrangement allocation order as it matches the sorted render order which means lookups have a high cache hit rate. <img width="1116" alt="Screenshot 2023-09-27 at 07 52 31" src="https://github.com/bevyengine/bevy/assets/302146/bc8eab90-e375-4d31-b5cd-f55f6f59ab67"> +13.0% median frame time. #### Random This test spawns the sprites with random z. This makes the batching and transparent 2D pass lookups get a lot of cache misses. <img width="1109" alt="Screenshot 2023-09-27 at 07 53 01" src="https://github.com/bevyengine/bevy/assets/302146/22073f5d-99a7-49b0-9584-d3ac3eac3033"> +0.6% median frame time. ### UI **NOTE: On `main` UI is using `SparseSet<Entity, T>`!** `many_buttons` <img width="1111" alt="Screenshot 2023-09-27 at 07 53 26" src="https://github.com/bevyengine/bevy/assets/302146/66afd56d-cbe4-49e7-8b64-2f28f6043d85"> +15.1% median frame time. ## Alternatives - Cart originally suggested trying out `SparseSet<Entity, T>` and indeed that is slightly faster under ideal conditions. However, `PassHashMap<Entity, T>` has better worst case performance when data is randomly distributed, rather than in sorted render order, and does not have the worst case memory usage that `SparseSet`'s dense `Vec<usize>` that maps from the `Entity` index to sparse index into `Vec<T>`. This dense `Vec` has to be as large as the largest Entity index used with the `SparseSet`. - I also tested `PassHashMap<u32, T>`, intending to use `Entity.index()` as the key, but this proved to sometimes be slower and mostly no different. - The only outstanding approach that has not been implemented and tested is to _not_ clear the render world of its entities each frame. That has its own problems, though they could perhaps be solved. - Performance-wise, if the entities and their component data were not cleared, then they would incur table moves on spawn, and should not thereafter, rather just their component data would be overwritten. Ideally we would have a neat way of either updating data in-place via `&mut T` queries, or inserting components if not present. This would likely be quite cumbersome to have to remember to do everywhere, but perhaps it only needs to be done in the more performance-sensitive systems. - The main problem to solve however is that we want to both maintain a mapping between main world entities and render world entities, be able to run the render app and world in parallel with the main app and world for pipelined rendering, and at the same time be able to spawn entities in the render world in such a way that those Entity ids do not collide with those spawned in the main world. This is potentially quite solvable, but could well be a lot of ECS work to do it in a way that makes sense. --- ## Changelog - Changed: Component data for entities to be drawn are no longer stored on entities in the render world. Instead, data is stored in a `EntityHashMap<Entity, T>` in various resources. This brings significant performance benefits due to the way the render app clears entities every frame. Resources of most interest are `RenderMeshInstances` and `RenderMaterialInstances`, and their 2D counterparts. ## Migration Guide Previously the render app extracted mesh entities and their component data from the main world and stored them as entities and components in the render world. Now they are extracted into essentially `EntityHashMap<Entity, T>` where `T` are structs containing an appropriate group of data. This means that while extract set systems will continue to run extract queries against the main world they will store their data in hash maps. Also, systems in later sets will either need to look up entities in the available resources such as `RenderMeshInstances`, or maintain their own `EntityHashMap<Entity, T>` for their own data. Before: ```rust fn queue_custom( material_meshes: Query<(Entity, &MeshTransforms, &Handle<Mesh>), With<InstanceMaterialData>>, ) { ... for (entity, mesh_transforms, mesh_handle) in &material_meshes { ... } } ``` After: ```rust fn queue_custom( render_mesh_instances: Res<RenderMeshInstances>, instance_entities: Query<Entity, With<InstanceMaterialData>>, ) { ... for entity in &instance_entities { let Some(mesh_instance) = render_mesh_instances.get(&entity) else { continue; }; // The mesh handle in `AssetId<Mesh>` form, and the `MeshTransforms` can now // be found in `mesh_instance` which is a `RenderMeshInstance` ... } } ``` --------- Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com> |
||
|
James Liu
|
12032cd296
|
Directly copy data into uniform buffers (#9865)
# Objective This is a minimally disruptive version of #8340. I attempted to update it, but failed due to the scope of the changes added in #8204. Fixes #8307. Partially addresses #4642. As seen in https://github.com/bevyengine/bevy/issues/8284, we're actually copying data twice in Prepare stage systems. Once into a CPU-side intermediate scratch buffer, and once again into a mapped buffer. This is inefficient and effectively doubles the time spent and memory allocated to run these systems. ## Solution Skip the scratch buffer entirely and use `wgpu::Queue::write_buffer_with` to directly write data into mapped buffers. Separately, this also directly uses `wgpu::Limits::min_uniform_buffer_offset_alignment` to set up the alignment when writing to the buffers. Partially addressing the issue raised in #4642. Storage buffers and the abstractions built on top of `DynamicUniformBuffer` will need to come in followup PRs. This may not have a noticeable performance difference in this PR, as the only first-party systems affected by this are view related, and likely are not going to be particularly heavy. --- ## Changelog Added: `DynamicUniformBuffer::get_writer`. Added: `DynamicUniformBufferWriter`. |
||
|
Nicola Papale
|
db1e3d36bc
|
Move skin code to a separate module (#9899)
# Objective mesh.rs is infamously large. We could split off unrelated code. ## Solution Morph targets are very similar to skinning and have their own module. We move skinned meshes to an independent module like morph targets and give the systems similar names. ### Open questions Should the skinning systems and structs stay public? --- ## Migration Guide Renamed skinning systems, resources and components: - extract_skinned_meshes -> extract_skins - prepare_skinned_meshes -> prepare_skins - SkinnedMeshUniform -> SkinUniform - SkinnedMeshJoints -> SkinIndex --------- Co-authored-by: François <mockersf@gmail.com> Co-authored-by: vero <email@atlasdostal.com> |
||
|
Robert Swain
|
5c884c5a15
|
Automatic batching/instancing of draw commands (#9685)
# Objective - Implement the foundations of automatic batching/instancing of draw commands as the next step from #89 - NOTE: More performance improvements will come when more data is managed and bound in ways that do not require rebinding such as mesh, material, and texture data. ## Solution - The core idea for batching of draw commands is to check whether any of the information that has to be passed when encoding a draw command changes between two things that are being drawn according to the sorted render phase order. These should be things like the pipeline, bind groups and their dynamic offsets, index/vertex buffers, and so on. - The following assumptions have been made: - Only entities with prepared assets (pipelines, materials, meshes) are queued to phases - View bindings are constant across a phase for a given draw function as phases are per-view - `batch_and_prepare_render_phase` is the only system that performs this batching and has sole responsibility for preparing the per-object data. As such the mesh binding and dynamic offsets are assumed to only vary as a result of the `batch_and_prepare_render_phase` system, e.g. due to having to split data across separate uniform bindings within the same buffer due to the maximum uniform buffer binding size. - Implement `GpuArrayBuffer` for `Mesh2dUniform` to store Mesh2dUniform in arrays in GPU buffers rather than each one being at a dynamic offset in a uniform buffer. This is the same optimisation that was made for 3D not long ago. - Change batch size for a range in `PhaseItem`, adding API for getting or mutating the range. This is more flexible than a size as the length of the range can be used in place of the size, but the start and end can be otherwise whatever is needed. - Add an optional mesh bind group dynamic offset to `PhaseItem`. This avoids having to do a massive table move just to insert `GpuArrayBufferIndex` components. ## Benchmarks All tests have been run on an M1 Max on AC power. `bevymark` and `many_cubes` were modified to use 1920x1080 with a scale factor of 1. I run a script that runs a separate Tracy capture process, and then runs the bevy example with `--features bevy_ci_testing,trace_tracy` and `CI_TESTING_CONFIG=../benchmark.ron` with the contents of `../benchmark.ron`: ```rust ( exit_after: Some(1500) ) ``` ...in order to run each test for 1500 frames. The recent changes to `many_cubes` and `bevymark` added reproducible random number generation so that with the same settings, the same rng will occur. They also added benchmark modes that use a fixed delta time for animations. Combined this means that the same frames should be rendered both on main and on the branch. The graphs compare main (yellow) to this PR (red). ### 3D Mesh `many_cubes --benchmark` <img width="1411" alt="Screenshot 2023-09-03 at 23 42 10" src="https://github.com/bevyengine/bevy/assets/302146/2088716a-c918-486c-8129-090b26fd2bc4"> The mesh and material are the same for all instances. This is basically the best case for the initial batching implementation as it results in 1 draw for the ~11.7k visible meshes. It gives a ~30% reduction in median frame time. The 1000th frame is identical using the flip tool:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4615 seconds ``` ### 3D Mesh `many_cubes --benchmark --material-texture-count 10` <img width="1404" alt="Screenshot 2023-09-03 at 23 45 18" src="https://github.com/bevyengine/bevy/assets/302146/5ee9c447-5bd2-45c6-9706-ac5ff8916daf"> This run uses 10 different materials by varying their textures. The materials are randomly selected, and there is no sorting by material bind group for opaque 3D so any batching is 'random'. The PR produces a ~5% reduction in median frame time. If we were to sort the opaque phase by the material bind group, then this should be a lot faster. This produces about 10.5k draws for the 11.7k visible entities. This makes sense as randomly selecting from 10 materials gives a chance that two adjacent entities randomly select the same material and can be batched. The 1000th frame is identical in flip:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4537 seconds ``` ### 3D Mesh `many_cubes --benchmark --vary-per-instance` <img width="1394" alt="Screenshot 2023-09-03 at 23 48 44" src="https://github.com/bevyengine/bevy/assets/302146/f02a816b-a444-4c18-a96a-63b5436f3b7f"> This run varies the material data per instance by randomly-generating its colour. This is the worst case for batching and that it performs about the same as `main` is a good thing as it demonstrates that the batching has minimal overhead when dealing with ~11k visible mesh entities. The 1000th frame is identical according to flip:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4568 seconds ``` ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d` <img width="1412" alt="Screenshot 2023-09-03 at 23 59 56" src="https://github.com/bevyengine/bevy/assets/302146/cb02ae07-237b-4646-ae9f-fda4dafcbad4"> This spawns 160 waves of 1000 quad meshes that are shaded with ColorMaterial. Each wave has a different material so 160 waves currently should result in 160 batches. This results in a 50% reduction in median frame time. Capturing a screenshot of the 1000th frame main vs PR gives:  ``` Mean: 0.001222 Weighted median: 0.750432 1st weighted quartile: 0.453494 3rd weighted quartile: 0.969758 Min: 0.000000 Max: 0.990296 Evaluation time: 0.4255 seconds ``` So they seem to produce the same results. I also double-checked the number of draws. `main` does 160000 draws, and the PR does 160, as expected. ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d --material-texture-count 10` <img width="1392" alt="Screenshot 2023-09-04 at 00 09 22" src="https://github.com/bevyengine/bevy/assets/302146/4358da2e-ce32-4134-82df-3ab74c40849c"> This generates 10 textures and generates materials for each of those and then selects one material per wave. The median frame time is reduced by 50%. Similar to the plain run above, this produces 160 draws on the PR and 160000 on `main` and the 1000th frame is identical (ignoring the fps counter text overlay).  ``` Mean: 0.002877 Weighted median: 0.964980 1st weighted quartile: 0.668871 3rd weighted quartile: 0.982749 Min: 0.000000 Max: 0.992377 Evaluation time: 0.4301 seconds ``` ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d --vary-per-instance` <img width="1396" alt="Screenshot 2023-09-04 at 00 13 53" src="https://github.com/bevyengine/bevy/assets/302146/b2198b18-3439-47ad-919a-cdabe190facb"> This creates unique materials per instance by randomly-generating the material's colour. This is the worst case for 2D batching. Somehow, this PR manages a 7% reduction in median frame time. Both main and this PR issue 160000 draws. The 1000th frame is the same:  ``` Mean: 0.001214 Weighted median: 0.937499 1st weighted quartile: 0.635467 3rd weighted quartile: 0.979085 Min: 0.000000 Max: 0.988971 Evaluation time: 0.4462 seconds ``` ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite` <img width="1396" alt="Screenshot 2023-09-04 at 12 21 12" src="https://github.com/bevyengine/bevy/assets/302146/8b31e915-d6be-4cac-abf5-c6a4da9c3d43"> This just spawns 160 waves of 1000 sprites. There should be and is no notable difference between main and the PR. ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite --material-texture-count 10` <img width="1389" alt="Screenshot 2023-09-04 at 12 36 08" src="https://github.com/bevyengine/bevy/assets/302146/45fe8d6d-c901-4062-a349-3693dd044413"> This spawns the sprites selecting a texture at random per instance from the 10 generated textures. This has no significant change vs main and shouldn't. ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite --vary-per-instance` <img width="1401" alt="Screenshot 2023-09-04 at 12 29 52" src="https://github.com/bevyengine/bevy/assets/302146/762c5c60-352e-471f-8dbe-bbf10e24ebd6"> This sets the sprite colour as being unique per instance. This can still all be drawn using one batch. There should be no difference but the PR produces median frame times that are 4% higher. Investigation showed no clear sources of cost, rather a mix of give and take that should not happen. It seems like noise in the results. ### Summary | Benchmark | % change in median frame time | | ------------- | ------------- | | many_cubes | 🟩 -30% | | many_cubes 10 materials | 🟩 -5% | | many_cubes unique materials | 🟩 ~0% | | bevymark mesh2d | 🟩 -50% | | bevymark mesh2d 10 materials | 🟩 -50% | | bevymark mesh2d unique materials | 🟩 -7% | | bevymark sprite | 🟥 2% | | bevymark sprite 10 materials | 🟥 0.6% | | bevymark sprite unique materials | 🟥 4.1% | --- ## Changelog - Added: 2D and 3D mesh entities that share the same mesh and material (same textures, same data) are now batched into the same draw command for better performance. --------- Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com> Co-authored-by: Nicola Papale <nico@nicopap.ch> |
||
|
Nicola Papale
|
47d87e49da
|
Refactor rendering systems to use let-else (#9870)
# Objective Some rendering system did heavy use of `if let`, and could be improved by using `let else`. ## Solution - Reduce rightward drift by using let-else over if-let - Extract value-to-key mappings to their own functions so that the system is less bloated, easier to understand - Use a `let` binding instead of untupling in closure argument to reduce indentation ## Note to reviewers Enable the "no white space diff" for easier viewing. In the "Files changed" view, click on the little cog right of the "Jump to" text, on the row where the "Review changes" button is. then enable the "Hide whitespace" checkbox and click reload. |
||
|
Nicola Papale
|
7163aabf29
|
Use a single line for of large binding lists (#9849)
# Objective - When adding/removing bindings in large binding lists, git would generate very difficult-to-read diffs ## Solution - Move the `@group(X) @binding(Y)` into the same line as the binding type declaration |
||
|
François
|
ae6bc08a58
|
Fix wireframe for skinned/morphed meshes (#9734)
# Objective - Fixes #6662 - Wireframe crash for skinned meshes: ``` wgpu error: Validation Error Caused by: In Device::create_render_pipeline note: label = `opaque_mesh_pipeline` Error matching ShaderStages(VERTEX) shader requirements against the pipeline Location[4] Uint32x4 interpolated as Some(Flat) with sampling None is not provided by the previous stage outputs Input is not provided by the earlier stage in the pipeline ``` - Wireframe crash for morphed meshes: ``` wgpu error: Validation Error Caused by: In a RenderPass note: encoder = `<CommandBuffer-(0, 14, Metal)>` In a draw command, indexed:true indirect:false note: render pipeline = `opaque_mesh_pipeline` The pipeline layout, associated with the current render pipeline, contains a bind group layout at index 1 which is incompatible with the bind group layout associated with the bind group at 1 ``` ## Solution - Fix the locations for skinned meshes in the wireframe shader - Add the morph key to the wireframe specialisation key - Morph the vertex in the wireframe shader https://github.com/bevyengine/bevy/assets/8672791/ce0a9584-bd28-4d74-9c3f-256602e6fac5 |
||
Joseph
|
8eb6ccdd87
|
Remove useless single tuples and trailing commas (#9720)
# Objective Title |
||
|
Carter Anderson
|
5eb292dc10
|
Bevy Asset V2 (#8624)
# Bevy Asset V2 Proposal ## Why Does Bevy Need A New Asset System? Asset pipelines are a central part of the gamedev process. Bevy's current asset system is missing a number of features that make it non-viable for many classes of gamedev. After plenty of discussions and [a long community feedback period](https://github.com/bevyengine/bevy/discussions/3972), we've identified a number missing features: * **Asset Preprocessing**: it should be possible to "preprocess" / "compile" / "crunch" assets at "development time" rather than when the game starts up. This enables offloading expensive work from deployed apps, faster asset loading, less runtime memory usage, etc. * **Per-Asset Loader Settings**: Individual assets cannot define their own loaders that override the defaults. Additionally, they cannot provide per-asset settings to their loaders. This is a huge limitation, as many asset types don't provide all information necessary for Bevy _inside_ the asset. For example, a raw PNG image says nothing about how it should be sampled (ex: linear vs nearest). * **Asset `.meta` files**: assets should have configuration files stored adjacent to the asset in question, which allows the user to configure asset-type-specific settings. These settings should be accessible during the pre-processing phase. Modifying a `.meta` file should trigger a re-processing / re-load of the asset. It should be possible to configure asset loaders from the meta file. * **Processed Asset Hot Reloading**: Changes to processed assets (or their dependencies) should result in re-processing them and re-loading the results in live Bevy Apps. * **Asset Dependency Tracking**: The current bevy_asset has no good way to wait for asset dependencies to load. It punts this as an exercise for consumers of the loader apis, which is unreasonable and error prone. There should be easy, ergonomic ways to wait for assets to load and block some logic on an asset's entire dependency tree loading. * **Runtime Asset Loading**: it should be (optionally) possible to load arbitrary assets dynamically at runtime. This necessitates being able to deploy and run the asset server alongside Bevy Apps on _all platforms_. For example, we should be able to invoke the shader compiler at runtime, stream scenes from sources like the internet, etc. To keep deployed binaries (and startup times) small, the runtime asset server configuration should be configurable with different settings compared to the "pre processor asset server". * **Multiple Backends**: It should be possible to load assets from arbitrary sources (filesystems, the internet, remote asset serves, etc). * **Asset Packing**: It should be possible to deploy assets in compressed "packs", which makes it easier and more efficient to distribute assets with Bevy Apps. * **Asset Handoff**: It should be possible to hold a "live" asset handle, which correlates to runtime data, without actually holding the asset in memory. Ex: it must be possible to hold a reference to a GPU mesh generated from a "mesh asset" without keeping the mesh data in CPU memory * **Per-Platform Processed Assets**: Different platforms and app distributions have different capabilities and requirements. Some platforms need lower asset resolutions or different asset formats to operate within the hardware constraints of the platform. It should be possible to define per-platform asset processing profiles. And it should be possible to deploy only the assets required for a given platform. These features have architectural implications that are significant enough to require a full rewrite. The current Bevy Asset implementation got us this far, but it can take us no farther. This PR defines a brand new asset system that implements most of these features, while laying the foundations for the remaining features to be built. ## Bevy Asset V2 Here is a quick overview of the features introduced in this PR. * **Asset Preprocessing**: Preprocess assets at development time into more efficient (and configurable) representations * **Dependency Aware**: Dependencies required to process an asset are tracked. If an asset's processed dependency changes, it will be reprocessed * **Hot Reprocessing/Reloading**: detect changes to asset source files, reprocess them if they have changed, and then hot-reload them in Bevy Apps. * **Only Process Changes**: Assets are only re-processed when their source file (or meta file) has changed. This uses hashing and timestamps to avoid processing assets that haven't changed. * **Transactional and Reliable**: Uses write-ahead logging (a technique commonly used by databases) to recover from crashes / forced-exits. Whenever possible it avoids full-reprocessing / only uncompleted transactions will be reprocessed. When the processor is running in parallel with a Bevy App, processor asset writes block Bevy App asset reads. Reading metadata + asset bytes is guaranteed to be transactional / correctly paired. * **Portable / Run anywhere / Database-free**: The processor does not rely on an in-memory database (although it uses some database techniques for reliability). This is important because pretty much all in-memory databases have unsupported platforms or build complications. * **Configure Processor Defaults Per File Type**: You can say "use this processor for all files of this type". * **Custom Processors**: The `Processor` trait is flexible and unopinionated. It can be implemented by downstream plugins. * **LoadAndSave Processors**: Most asset processing scenarios can be expressed as "run AssetLoader A, save the results using AssetSaver X, and then load the result using AssetLoader B". For example, load this png image using `PngImageLoader`, which produces an `Image` asset and then save it using `CompressedImageSaver` (which also produces an `Image` asset, but in a compressed format), which takes an `Image` asset as input. This means if you have an `AssetLoader` for an asset, you are already half way there! It also means that you can share AssetSavers across multiple loaders. Because `CompressedImageSaver` accepts Bevy's generic Image asset as input, it means you can also use it with some future `JpegImageLoader`. * **Loader and Saver Settings**: Asset Loaders and Savers can now define their own settings types, which are passed in as input when an asset is loaded / saved. Each asset can define its own settings. * **Asset `.meta` files**: configure asset loaders, their settings, enable/disable processing, and configure processor settings * **Runtime Asset Dependency Tracking** Runtime asset dependencies (ex: if an asset contains a `Handle<Image>`) are tracked by the asset server. An event is emitted when an asset and all of its dependencies have been loaded * **Unprocessed Asset Loading**: Assets do not require preprocessing. They can be loaded directly. A processed asset is just a "normal" asset with some extra metadata. Asset Loaders don't need to know or care about whether or not an asset was processed. * **Async Asset IO**: Asset readers/writers use async non-blocking interfaces. Note that because Rust doesn't yet support async traits, there is a bit of manual Boxing / Future boilerplate. This will hopefully be removed in the near future when Rust gets async traits. * **Pluggable Asset Readers and Writers**: Arbitrary asset source readers/writers are supported, both by the processor and the asset server. * **Better Asset Handles** * **Single Arc Tree**: Asset Handles now use a single arc tree that represents the lifetime of the asset. This makes their implementation simpler, more efficient, and allows us to cheaply attach metadata to handles. Ex: the AssetPath of a handle is now directly accessible on the handle itself! * **Const Typed Handles**: typed handles can be constructed in a const context. No more weird "const untyped converted to typed at runtime" patterns! * **Handles and Ids are Smaller / Faster To Hash / Compare**: Typed `Handle<T>` is now much smaller in memory and `AssetId<T>` is even smaller. * **Weak Handle Usage Reduction**: In general Handles are now considered to be "strong". Bevy features that previously used "weak `Handle<T>`" have been ported to `AssetId<T>`, which makes it statically clear that the features do not hold strong handles (while retaining strong type information). Currently Handle::Weak still exists, but it is very possible that we can remove that entirely. * **Efficient / Dense Asset Ids**: Assets now have efficient dense runtime asset ids, which means we can avoid expensive hash lookups. Assets are stored in Vecs instead of HashMaps. There are now typed and untyped ids, which means we no longer need to store dynamic type information in the ID for typed handles. "AssetPathId" (which was a nightmare from a performance and correctness standpoint) has been entirely removed in favor of dense ids (which are retrieved for a path on load) * **Direct Asset Loading, with Dependency Tracking**: Assets that are defined at runtime can still have their dependencies tracked by the Asset Server (ex: if you create a material at runtime, you can still wait for its textures to load). This is accomplished via the (currently optional) "asset dependency visitor" trait. This system can also be used to define a set of assets to load, then wait for those assets to load. * **Async folder loading**: Folder loading also uses this system and immediately returns a handle to the LoadedFolder asset, which means folder loading no longer blocks on directory traversals. * **Improved Loader Interface**: Loaders now have a specific "top level asset type", which makes returning the top-level asset simpler and statically typed. * **Basic Image Settings and Processing**: Image assets can now be processed into the gpu-friendly Basic Universal format. The ImageLoader now has a setting to define what format the image should be loaded as. Note that this is just a minimal MVP ... plenty of additional work to do here. To demo this, enable the `basis-universal` feature and turn on asset processing. * **Simpler Audio Play / AudioSink API**: Asset handle providers are cloneable, which means the Audio resource can mint its own handles. This means you can now do `let sink_handle = audio.play(music)` instead of `let sink_handle = audio_sinks.get_handle(audio.play(music))`. Note that this might still be replaced by https://github.com/bevyengine/bevy/pull/8424. **Removed Handle Casting From Engine Features**: Ex: FontAtlases no longer use casting between handle types ## Using The New Asset System ### Normal Unprocessed Asset Loading By default the `AssetPlugin` does not use processing. It behaves pretty much the same way as the old system. If you are defining a custom asset, first derive `Asset`: ```rust #[derive(Asset)] struct Thing { value: String, } ``` Initialize the asset: ```rust app.init_asset:<Thing>() ``` Implement a new `AssetLoader` for it: ```rust #[derive(Default)] struct ThingLoader; #[derive(Serialize, Deserialize, Default)] pub struct ThingSettings { some_setting: bool, } impl AssetLoader for ThingLoader { type Asset = Thing; type Settings = ThingSettings; fn load<'a>( &'a self, reader: &'a mut Reader, settings: &'a ThingSettings, load_context: &'a mut LoadContext, ) -> BoxedFuture<'a, Result<Thing, anyhow::Error>> { Box::pin(async move { let mut bytes = Vec::new(); reader.read_to_end(&mut bytes).await?; // convert bytes to value somehow Ok(Thing { value }) }) } fn extensions(&self) -> &[&str] { &["thing"] } } ``` Note that this interface will get much cleaner once Rust gets support for async traits. `Reader` is an async futures_io::AsyncRead. You can stream bytes as they come in or read them all into a `Vec<u8>`, depending on the context. You can use `let handle = load_context.load(path)` to kick off a dependency load, retrieve a handle, and register the dependency for the asset. Then just register the loader in your Bevy app: ```rust app.init_asset_loader::<ThingLoader>() ``` Now just add your `Thing` asset files into the `assets` folder and load them like this: ```rust fn system(asset_server: Res<AssetServer>) { let handle = Handle<Thing> = asset_server.load("cool.thing"); } ``` You can check load states directly via the asset server: ```rust if asset_server.load_state(&handle) == LoadState::Loaded { } ``` You can also listen for events: ```rust fn system(mut events: EventReader<AssetEvent<Thing>>, handle: Res<SomeThingHandle>) { for event in events.iter() { if event.is_loaded_with_dependencies(&handle) { } } } ``` Note the new `AssetEvent::LoadedWithDependencies`, which only fires when the asset is loaded _and_ all dependencies (and their dependencies) have loaded. Unlike the old asset system, for a given asset path all `Handle<T>` values point to the same underlying Arc. This means Handles can cheaply hold more asset information, such as the AssetPath: ```rust // prints the AssetPath of the handle info!("{:?}", handle.path()) ``` ### Processed Assets Asset processing can be enabled via the `AssetPlugin`. When developing Bevy Apps with processed assets, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev())) ``` This runs the `AssetProcessor` in the background with hot-reloading. It reads assets from the `assets` folder, processes them, and writes them to the `.imported_assets` folder. Asset loads in the Bevy App will wait for a processed version of the asset to become available. If an asset in the `assets` folder changes, it will be reprocessed and hot-reloaded in the Bevy App. When deploying processed Bevy apps, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed())) ``` This does not run the `AssetProcessor` in the background. It behaves like `AssetPlugin::unprocessed()`, but reads assets from `.imported_assets`. When the `AssetProcessor` is running, it will populate sibling `.meta` files for assets in the `assets` folder. Meta files for assets that do not have a processor configured look like this: ```rust ( meta_format_version: "1.0", asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` This is metadata for an image asset. For example, if you have `assets/my_sprite.png`, this could be the metadata stored at `assets/my_sprite.png.meta`. Meta files are totally optional. If no metadata exists, the default settings will be used. In short, this file says "load this asset with the ImageLoader and use the file extension to determine the image type". This type of meta file is supported in all AssetPlugin modes. If in `Unprocessed` mode, the asset (with the meta settings) will be loaded directly. If in `ProcessedDev` mode, the asset file will be copied directly to the `.imported_assets` folder. The meta will also be copied directly to the `.imported_assets` folder, but with one addition: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 12415480888597742505, full_hash: 14344495437905856884, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` `processed_info` contains `hash` (a direct hash of the asset and meta bytes), `full_hash` (a hash of `hash` and the hashes of all `process_dependencies`), and `process_dependencies` (the `path` and `full_hash` of every process_dependency). A "process dependency" is an asset dependency that is _directly_ used when processing the asset. Images do not have process dependencies, so this is empty. When the processor is enabled, you can use the `Process` metadata config: ```rust ( meta_format_version: "1.0", asset: Process( processor: "bevy_asset::processor::process::LoadAndSave<bevy_render::texture::image_loader::ImageLoader, bevy_render::texture::compressed_image_saver::CompressedImageSaver>", settings: ( loader_settings: ( format: FromExtension, ), saver_settings: ( generate_mipmaps: true, ), ), ), ) ``` This configures the asset to use the `LoadAndSave` processor, which runs an AssetLoader and feeds the result into an AssetSaver (which saves the given Asset and defines a loader to load it with). (for terseness LoadAndSave will likely get a shorter/friendlier type name when [Stable Type Paths](#7184) lands). `LoadAndSave` is likely to be the most common processor type, but arbitrary processors are supported. `CompressedImageSaver` saves an `Image` in the Basis Universal format and configures the ImageLoader to load it as basis universal. The `AssetProcessor` will read this meta, run it through the LoadAndSave processor, and write the basis-universal version of the image to `.imported_assets`. The final metadata will look like this: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 905599590923828066, full_hash: 9948823010183819117, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: Format(Basis), ), ), ) ``` To try basis-universal processing out in Bevy examples, (for example `sprite.rs`), change `add_plugins(DefaultPlugins)` to `add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))` and run with the `basis-universal` feature enabled: `cargo run --features=basis-universal --example sprite`. To create a custom processor, there are two main paths: 1. Use the `LoadAndSave` processor with an existing `AssetLoader`. Implement the `AssetSaver` trait, register the processor using `asset_processor.register_processor::<LoadAndSave<ImageLoader, CompressedImageSaver>>(image_saver.into())`. 2. Implement the `Process` trait directly and register it using: `asset_processor.register_processor(thing_processor)`. You can configure default processors for file extensions like this: ```rust asset_processor.set_default_processor::<ThingProcessor>("thing") ``` There is one more metadata type to be aware of: ```rust ( meta_format_version: "1.0", asset: Ignore, ) ``` This will ignore the asset during processing / prevent it from being written to `.imported_assets`. The AssetProcessor stores a transaction log at `.imported_assets/log` and uses it to gracefully recover from unexpected stops. This means you can force-quit the processor (and Bevy Apps running the processor in parallel) at arbitrary times! `.imported_assets` is "local state". It should _not_ be checked into source control. It should also be considered "read only". In practice, you _can_ modify processed assets and processed metadata if you really need to test something. But those modifications will not be represented in the hashes of the assets, so the processed state will be "out of sync" with the source assets. The processor _will not_ fix this for you. Either revert the change after you have tested it, or delete the processed files so they can be re-populated. ## Open Questions There are a number of open questions to be discussed. We should decide if they need to be addressed in this PR and if so, how we will address them: ### Implied Dependencies vs Dependency Enumeration There are currently two ways to populate asset dependencies: * **Implied via AssetLoaders**: if an AssetLoader loads an asset (and retrieves a handle), a dependency is added to the list. * **Explicit via the optional Asset::visit_dependencies**: if `server.load_asset(my_asset)` is called, it will call `my_asset.visit_dependencies`, which will grab dependencies that have been manually defined for the asset via the Asset trait impl (which can be derived). This means that defining explicit dependencies is optional for "loaded assets". And the list of dependencies is always accurate because loaders can only produce Handles if they register dependencies. If an asset was loaded with an AssetLoader, it only uses the implied dependencies. If an asset was created at runtime and added with `asset_server.load_asset(MyAsset)`, it will use `Asset::visit_dependencies`. However this can create a behavior mismatch between loaded assets and equivalent "created at runtime" assets if `Assets::visit_dependencies` doesn't exactly match the dependencies produced by the AssetLoader. This behavior mismatch can be resolved by completely removing "implied loader dependencies" and requiring `Asset::visit_dependencies` to supply dependency data. But this creates two problems: * It makes defining loaded assets harder and more error prone: Devs must remember to manually annotate asset dependencies with `#[dependency]` when deriving `Asset`. For more complicated assets (such as scenes), the derive likely wouldn't be sufficient and a manual `visit_dependencies` impl would be required. * Removes the ability to immediately kick off dependency loads: When AssetLoaders retrieve a Handle, they also immediately kick off an asset load for the handle, which means it can start loading in parallel _before_ the asset finishes loading. For large assets, this could be significant. (although this could be mitigated for processed assets if we store dependencies in the processed meta file and load them ahead of time) ### Eager ProcessorDev Asset Loading I made a controversial call in the interest of fast startup times ("time to first pixel") for the "processor dev mode configuration". When initializing the AssetProcessor, current processed versions of unchanged assets are yielded immediately, even if their dependencies haven't been checked yet for reprocessing. This means that non-current-state-of-filesystem-but-previously-valid assets might be returned to the App first, then hot-reloaded if/when their dependencies change and the asset is reprocessed. Is this behavior desirable? There is largely one alternative: do not yield an asset from the processor to the app until all of its dependencies have been checked for changes. In some common cases (load dependency has not changed since last run) this will increase startup time. The main question is "by how much" and is that slower startup time worth it in the interest of only yielding assets that are true to the current state of the filesystem. Should this be configurable? I'm starting to think we should only yield an asset after its (historical) dependencies have been checked for changes + processed as necessary, but I'm curious what you all think. ### Paths Are Currently The Only Canonical ID / Do We Want Asset UUIDs? In this implementation AssetPaths are the only canonical asset identifier (just like the previous Bevy Asset system and Godot). Moving assets will result in re-scans (and currently reprocessing, although reprocessing can easily be avoided with some changes). Asset renames/moves will break code and assets that rely on specific paths, unless those paths are fixed up. Do we want / need "stable asset uuids"? Introducing them is very possible: 1. Generate a UUID and include it in .meta files 2. Support UUID in AssetPath 3. Generate "asset indices" which are loaded on startup and map UUIDs to paths. 4 (maybe). Consider only supporting UUIDs for processed assets so we can generate quick-to-load indices instead of scanning meta files. The main "pro" is that assets referencing UUIDs don't need to be migrated when a path changes. The main "con" is that UUIDs cannot be "lazily resolved" like paths. They need a full view of all assets to answer the question "does this UUID exist". Which means UUIDs require the AssetProcessor to fully finish startup scans before saying an asset doesnt exist. And they essentially require asset pre-processing to use in apps, because scanning all asset metadata files at runtime to resolve a UUID is not viable for medium-to-large apps. It really requires a pre-generated UUID index, which must be loaded before querying for assets. I personally think this should be investigated in a separate PR. Paths aren't going anywhere ... _everyone_ uses filesystems (and filesystem-like apis) to manage their asset source files. I consider them permanent canonical asset information. Additionally, they behave well for both processed and unprocessed asset modes. Given that Bevy is supporting both, this feels like the right canonical ID to start with. UUIDS (and maybe even other indexed-identifier types) can be added later as necessary. ### Folder / File Naming Conventions All asset processing config currently lives in the `.imported_assets` folder. The processor transaction log is in `.imported_assets/log`. Processed assets are added to `.imported_assets/Default`, which will make migrating to processed asset profiles (ex: a `.imported_assets/Mobile` profile) a non-breaking change. It also allows us to create top-level files like `.imported_assets/log` without it being interpreted as an asset. Meta files currently have a `.meta` suffix. Do we like these names and conventions? ### Should the `AssetPlugin::processed_dev` configuration enable `watch_for_changes` automatically? Currently it does (which I think makes sense), but it does make it the only configuration that enables watch_for_changes by default. ### Discuss on_loaded High Level Interface: This PR includes a very rough "proof of concept" `on_loaded` system adapter that uses the `LoadedWithDependencies` event in combination with `asset_server.load_asset` dependency tracking to support this pattern ```rust fn main() { App::new() .init_asset::<MyAssets>() .add_systems(Update, on_loaded(create_array_texture)) .run(); } #[derive(Asset, Clone)] struct MyAssets { #[dependency] picture_of_my_cat: Handle<Image>, #[dependency] picture_of_my_other_cat: Handle<Image>, } impl FromWorld for ArrayTexture { fn from_world(world: &mut World) -> Self { picture_of_my_cat: server.load("meow.png"), picture_of_my_other_cat: server.load("meeeeeeeow.png"), } } fn spawn_cat(In(my_assets): In<MyAssets>, mut commands: Commands) { commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_cat.clone(), ..default() }); commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_other_cat.clone(), ..default() }); } ``` The implementation is _very_ rough. And it is currently unsafe because `bevy_ecs` doesn't expose some internals to do this safely from inside `bevy_asset`. There are plenty of unanswered questions like: * "do we add a Loadable" derive? (effectively automate the FromWorld implementation above) * Should `MyAssets` even be an Asset? (largely implemented this way because it elegantly builds on `server.load_asset(MyAsset { .. })` dependency tracking). We should think hard about what our ideal API looks like (and if this is a pattern we want to support). Not necessarily something we need to solve in this PR. The current `on_loaded` impl should probably be removed from this PR before merging. ## Clarifying Questions ### What about Assets as Entities? This Bevy Asset V2 proposal implementation initially stored Assets as ECS Entities. Instead of `AssetId<T>` + the `Assets<T>` resource it used `Entity` as the asset id and Asset values were just ECS components. There are plenty of compelling reasons to do this: 1. Easier to inline assets in Bevy Scenes (as they are "just" normal entities + components) 2. More flexible queries: use the power of the ECS to filter assets (ex: `Query<Mesh, With<Tree>>`). 3. Extensible. Users can add arbitrary component data to assets. 4. Things like "component visualization tools" work out of the box to visualize asset data. However Assets as Entities has a ton of caveats right now: * We need to be able to allocate entity ids without a direct World reference (aka rework id allocator in Entities ... i worked around this in my prototypes by just pre allocating big chunks of entities) * We want asset change events in addition to ECS change tracking ... how do we populate them when mutations can come from anywhere? Do we use Changed queries? This would require iterating over the change data for all assets every frame. Is this acceptable or should we implement a new "event based" component change detection option? * Reconciling manually created assets with asset-system managed assets has some nuance (ex: are they "loaded" / do they also have that component metadata?) * "how do we handle "static" / default entity handles" (ties in to the Entity Indices discussion: https://github.com/bevyengine/bevy/discussions/8319). This is necessary for things like "built in" assets and default handles in things like SpriteBundle. * Storing asset information as a component makes it easy to "invalidate" asset state by removing the component (or forcing modifications). Ideally we have ways to lock this down (some combination of Rust type privacy and ECS validation) In practice, how we store and identify assets is a reasonably superficial change (porting off of Assets as Entities and implementing dedicated storage + ids took less than a day). So once we sort out the remaining challenges the flip should be straightforward. Additionally, I do still have "Assets as Entities" in my commit history, so we can reuse that work. I personally think "assets as entities" is a good endgame, but it also doesn't provide _significant_ value at the moment and it certainly isn't ready yet with the current state of things. ### Why not Distill? [Distill](https://github.com/amethyst/distill) is a high quality fully featured asset system built in Rust. It is very natural to ask "why not just use Distill?". It is also worth calling out that for awhile, [we planned on adopting Distill / I signed off on it](https://github.com/bevyengine/bevy/issues/708). However I think Bevy has a number of constraints that make Distill adoption suboptimal: * **Architectural Simplicity:** * Distill's processor requires an in-memory database (lmdb) and RPC networked API (using Cap'n Proto). Each of these introduces API complexity that increases maintenance burden and "code grokability". Ignoring tests, documentation, and examples, Distill has 24,237 lines of Rust code (including generated code for RPC + database interactions). If you ignore generated code, it has 11,499 lines. * Bevy builds the AssetProcessor and AssetServer using pluggable AssetReader/AssetWriter Rust traits with simple io interfaces. They do not necessitate databases or RPC interfaces (although Readers/Writers could use them if that is desired). Bevy Asset V2 (at the time of writing this PR) is 5,384 lines of Rust code (ignoring tests, documentation, and examples). Grain of salt: Distill does have more features currently (ex: Asset Packing, GUIDS, remote-out-of-process asset processor). I do plan to implement these features in Bevy Asset V2 and I personally highly doubt they will meaningfully close the 6115 lines-of-code gap. * This complexity gap (which while illustrated by lines of code, is much bigger than just that) is noteworthy to me. Bevy should be hackable and there are pillars of Distill that are very hard to understand and extend. This is a matter of opinion (and Bevy Asset V2 also has complicated areas), but I think Bevy Asset V2 is much more approachable for the average developer. * Necessary disclaimer: counting lines of code is an extremely rough complexity metric. Read the code and form your own opinions. * **Optional Asset Processing:** Not all Bevy Apps (or Bevy App developers) need / want asset preprocessing. Processing increases the complexity of the development environment by introducing things like meta files, imported asset storage, running processors in the background, waiting for processing to finish, etc. Distill _requires_ preprocessing to work. With Bevy Asset V2 processing is fully opt-in. The AssetServer isn't directly aware of asset processors at all. AssetLoaders only care about converting bytes to runtime Assets ... they don't know or care if the bytes were pre-processed or not. Processing is "elegantly" (forgive my self-congratulatory phrasing) layered on top and builds on the existing Asset system primitives. * **Direct Filesystem Access to Processed Asset State:** Distill stores processed assets in a database. This makes debugging / inspecting the processed outputs harder (either requires special tooling to query the database or they need to be "deployed" to be inspected). Bevy Asset V2, on the other hand, stores processed assets in the filesystem (by default ... this is configurable). This makes interacting with the processed state more natural. Note that both Godot and Unity's new asset system store processed assets in the filesystem. * **Portability**: Because Distill's processor uses lmdb and RPC networking, it cannot be run on certain platforms (ex: lmdb is a non-rust dependency that cannot run on the web, some platforms don't support running network servers). Bevy should be able to process assets everywhere (ex: run the Bevy Editor on the web, compile + process shaders on mobile, etc). Distill does partially mitigate this problem by supporting "streaming" assets via the RPC protocol, but this is not a full solve from my perspective. And Bevy Asset V2 can (in theory) also stream assets (without requiring RPC, although this isn't implemented yet) Note that I _do_ still think Distill would be a solid asset system for Bevy. But I think the approach in this PR is a better solve for Bevy's specific "asset system requirements". ### Doesn't async-fs just shim requests to "sync" `std::fs`? What is the point? "True async file io" has limited / spotty platform support. async-fs (and the rust async ecosystem generally ... ex Tokio) currently use async wrappers over std::fs that offload blocking requests to separate threads. This may feel unsatisfying, but it _does_ still provide value because it prevents our task pools from blocking on file system operations (which would prevent progress when there are many tasks to do, but all threads in a pool are currently blocking on file system ops). Additionally, using async APIs for our AssetReaders and AssetWriters also provides value because we can later add support for "true async file io" for platforms that support it. _And_ we can implement other "true async io" asset backends (such as networked asset io). ## Draft TODO - [x] Fill in missing filesystem event APIs: file removed event (which is expressed as dangling RenameFrom events in some cases), file/folder renamed event - [x] Assets without loaders are not moved to the processed folder. This breaks things like referenced `.bin` files for GLTFs. This should be configurable per-non-asset-type. - [x] Initial implementation of Reflect and FromReflect for Handle. The "deserialization" parity bar is low here as this only worked with static UUIDs in the old impl ... this is a non-trivial problem. Either we add a Handle::AssetPath variant that gets "upgraded" to a strong handle on scene load or we use a separate AssetRef type for Bevy scenes (which is converted to a runtime Handle on load). This deserves its own discussion in a different pr. - [x] Populate read_asset_bytes hash when run by the processor (a bit of a special case .. when run by the processor the processed meta will contain the hash so we don't need to compute it on the spot, but we don't want/need to read the meta when run by the main AssetServer) - [x] Delay hot reloading: currently filesystem events are handled immediately, which creates timing issues in some cases. For example hot reloading images can sometimes break because the image isn't finished writing. We should add a delay, likely similar to the [implementation in this PR](https://github.com/bevyengine/bevy/pull/8503). - [x] Port old platform-specific AssetIo implementations to the new AssetReader interface (currently missing Android and web) - [x] Resolve on_loaded unsafety (either by removing the API entirely or removing the unsafe) - [x] Runtime loader setting overrides - [x] Remove remaining unwraps that should be error-handled. There are number of TODOs here - [x] Pretty AssetPath Display impl - [x] Document more APIs - [x] Resolve spurious "reloading because it has changed" events (to repro run load_gltf with `processed_dev()`) - [x] load_dependency hot reloading currently only works for processed assets. If processing is disabled, load_dependency changes are not hot reloaded. - [x] Replace AssetInfo dependency load/fail counters with `loading_dependencies: HashSet<UntypedAssetId>` to prevent reloads from (potentially) breaking counters. Storing this will also enable "dependency reloaded" events (see [Next Steps](#next-steps)) - [x] Re-add filesystem watcher cargo feature gate (currently it is not optional) - [ ] Migration Guide - [ ] Changelog ## Followup TODO - [ ] Replace "eager unchanged processed asset loading" behavior with "don't returned unchanged processed asset until dependencies have been checked". - [ ] Add true `Ignore` AssetAction that does not copy the asset to the imported_assets folder. - [ ] Finish "live asset unloading" (ex: free up CPU asset memory after uploading an image to the GPU), rethink RenderAssets, and port renderer features. The `Assets` collection uses `Option<T>` for asset storage to support its removal. (1) the Option might not actually be necessary ... might be able to just remove from the collection entirely (2) need to finalize removal apis - [ ] Try replacing the "channel based" asset id recycling with something a bit more efficient (ex: we might be able to use raw atomic ints with some cleverness) - [ ] Consider adding UUIDs to processed assets (scoped just to helping identify moved assets ... not exposed to load queries ... see [Next Steps](#next-steps)) - [ ] Store "last modified" source asset and meta timestamps in processed meta files to enable skipping expensive hashing when the file wasn't changed - [ ] Fix "slow loop" handle drop fix - [ ] Migrate to TypeName - [x] Handle "loader preregistration". See #9429 ## Next Steps * **Configurable per-type defaults for AssetMeta**: It should be possible to add configuration like "all png image meta should default to using nearest sampling" (currently this hard-coded per-loader/processor Settings::default() impls). Also see the "Folder Meta" bullet point. * **Avoid Reprocessing on Asset Renames / Moves**: See the "canonical asset ids" discussion in [Open Questions](#open-questions) and the relevant bullet point in [Draft TODO](#draft-todo). Even without canonical ids, folder renames could avoid reprocessing in some cases. * **Multiple Asset Sources**: Expand AssetPath to support "asset source names" and support multiple AssetReaders in the asset server (ex: `webserver://some_path/image.png` backed by an Http webserver AssetReader). The "default" asset reader would use normal `some_path/image.png` paths. Ideally this works in combination with multiple AssetWatchers for hot-reloading * **Stable Type Names**: this pr removes the TypeUuid requirement from assets in favor of `std::any::type_name`. This makes defining assets easier (no need to generate a new uuid / use weird proc macro syntax). It also makes reading meta files easier (because things have "friendly names"). We also use type names for components in scene files. If they are good enough for components, they are good enough for assets. And consistency across Bevy pillars is desirable. However, `std::any::type_name` is not guaranteed to be stable (although in practice it is). We've developed a [stable type path](https://github.com/bevyengine/bevy/pull/7184) to resolve this, which should be adopted when it is ready. * **Command Line Interface**: It should be possible to run the asset processor in a separate process from the command line. This will also require building a network-server-backed AssetReader to communicate between the app and the processor. We've been planning to build a "bevy cli" for awhile. This seems like a good excuse to build it. * **Asset Packing**: This is largely an additive feature, so it made sense to me to punt this until we've laid the foundations in this PR. * **Per-Platform Processed Assets**: It should be possible to generate assets for multiple platforms by supporting multiple "processor profiles" per asset (ex: compress with format X on PC and Y on iOS). I think there should probably be arbitrary "profiles" (which can be separate from actual platforms), which are then assigned to a given platform when generating the final asset distribution for that platform. Ex: maybe devs want a "Mobile" profile that is shared between iOS and Android. Or a "LowEnd" profile shared between web and mobile. * **Versioning and Migrations**: Assets, Loaders, Savers, and Processors need to have versions to determine if their schema is valid. If an asset / loader version is incompatible with the current version expected at runtime, the processor should be able to migrate them. I think we should try using Bevy Reflect for this, as it would allow us to load the old version as a dynamic Reflect type without actually having the old Rust type. It would also allow us to define "patches" to migrate between versions (Bevy Reflect devs are currently working on patching). The `.meta` file already has its own format version. Migrating that to new versions should also be possible. * **Real Copy-on-write AssetPaths**: Rust's actual Cow (clone-on-write type) currently used by AssetPath can still result in String clones that aren't actually necessary (cloning an Owned Cow clones the contents). Bevy's asset system requires cloning AssetPaths in a number of places, which result in actual clones of the internal Strings. This is not efficient. AssetPath internals should be reworked to exhibit truer cow-like-behavior that reduces String clones to the absolute minimum. * **Consider processor-less processing**: In theory the AssetServer could run processors "inline" even if the background AssetProcessor is disabled. If we decide this is actually desirable, we could add this. But I don't think its a priority in the short or medium term. * **Pre-emptive dependency loading**: We could encode dependencies in processed meta files, which could then be used by the Asset Server to kick of dependency loads as early as possible (prior to starting the actual asset load). Is this desirable? How much time would this save in practice? * **Optimize Processor With UntypedAssetIds**: The processor exclusively uses AssetPath to identify assets currently. It might be possible to swap these out for UntypedAssetIds in some places, which are smaller / cheaper to hash and compare. * **One to Many Asset Processing**: An asset source file that produces many assets currently must be processed into a single "processed" asset source. If labeled assets can be written separately they can each have their own configured savers _and_ they could be loaded more granularly. Definitely worth exploring! * **Automatically Track "Runtime-only" Asset Dependencies**: Right now, tracking "created at runtime" asset dependencies requires adding them via `asset_server.load_asset(StandardMaterial::default())`. I think with some cleverness we could also do this for `materials.add(StandardMaterial::default())`, making tracking work "everywhere". There are challenges here relating to change detection / ensuring the server is made aware of dependency changes. This could be expensive in some cases. * **"Dependency Changed" events**: Some assets have runtime artifacts that need to be re-generated when one of their dependencies change (ex: regenerate a material's bind group when a Texture needs to change). We are generating the dependency graph so we can definitely produce these events. Buuuuut generating these events will have a cost / they could be high frequency for some assets, so we might want this to be opt-in for specific cases. * **Investigate Storing More Information In Handles**: Handles can now store arbitrary information, which makes it cheaper and easier to access. How much should we move into them? Canonical asset load states (via atomics)? (`handle.is_loaded()` would be very cool). Should we store the entire asset and remove the `Assets<T>` collection? (`Arc<RwLock<Option<Image>>>`?) * **Support processing and loading files without extensions**: This is a pretty arbitrary restriction and could be supported with very minimal changes. * **Folder Meta**: It would be nice if we could define per folder processor configuration defaults (likely in a `.meta` or `.folder_meta` file). Things like "default to linear filtering for all Images in this folder". * **Replace async_broadcast with event-listener?** This might be approximately drop-in for some uses and it feels more light weight * **Support Running the AssetProcessor on the Web**: Most of the hard work is done here, but there are some easy straggling TODOs (make the transaction log an interface instead of a direct file writer so we can write a web storage backend, implement an AssetReader/AssetWriter that reads/writes to something like LocalStorage). * **Consider identifying and preventing circular dependencies**: This is especially important for "processor dependencies", as processing will silently never finish in these cases. * **Built-in/Inlined Asset Hot Reloading**: This PR regresses "built-in/inlined" asset hot reloading (previously provided by the DebugAssetServer). I'm intentionally punting this because I think it can be cleanly implemented with "multiple asset sources" by registering a "debug asset source" (ex: `debug://bevy_pbr/src/render/pbr.wgsl` asset paths) in combination with an AssetWatcher for that asset source and support for "manually loading pats with asset bytes instead of AssetReaders". The old DebugAssetServer was quite nasty and I'd love to avoid that hackery going forward. * **Investigate ways to remove double-parsing meta files**: Parsing meta files currently involves parsing once with "minimal" versions of the meta file to extract the type name of the loader/processor config, then parsing again to parse the "full" meta. This is suboptimal. We should be able to define custom deserializers that (1) assume the loader/processor type name comes first (2) dynamically looks up the loader/processor registrations to deserialize settings in-line (similar to components in the bevy scene format). Another alternative: deserialize as dynamic Reflect objects and then convert. * **More runtime loading configuration**: Support using the Handle type as a hint to select an asset loader (instead of relying on AssetPath extensions) * **More high level Processor trait implementations**: For example, it might be worth adding support for arbitrary chains of "asset transforms" that modify an in-memory asset representation between loading and saving. (ex: load a Mesh, run a `subdivide_mesh` transform, followed by a `flip_normals` transform, then save the mesh to an efficient compressed format). * **Bevy Scene Handle Deserialization**: (see the relevant [Draft TODO item](#draft-todo) for context) * **Explore High Level Load Interfaces**: See [this discussion](#discuss-on_loaded-high-level-interface) for one prototype. * **Asset Streaming**: It would be great if we could stream Assets (ex: stream a long video file piece by piece) * **ID Exchanging**: In this PR Asset Handles/AssetIds are bigger than they need to be because they have a Uuid enum variant. If we implement an "id exchanging" system that trades Uuids for "efficient runtime ids", we can cut down on the size of AssetIds, making them more efficient. This has some open design questions, such as how to spawn entities with "default" handle values (as these wouldn't have access to the exchange api in the current system). * **Asset Path Fixup Tooling**: Assets that inline asset paths inside them will break when an asset moves. The asset system provides the functionality to detect when paths break. We should build a framework that enables formats to define "path migrations". This is especially important for scene files. For editor-generated files, we should also consider using UUIDs (see other bullet point) to avoid the need to migrate in these cases. --------- Co-authored-by: BeastLe9enD <beastle9end@outlook.de> Co-authored-by: Mike <mike.hsu@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com> |
