# Objective
Fix an issue where events are not being dropped after being read. I
believe #10077 introduced this issue. The code currently works as
follows:
1. `EventUpdateSignal` is **shared for all event types**
2. During the fixed update phase, `EventUpdateSignal` is set to true
3. `event_update_system`, **unique per event type**, runs to update
Events<T>
4. `event_update_system` reads value of `EventUpdateSignal` to check if
it should update, and then **resets** the value to false
If there are multiple event types, the first `event_update_system` run
will reset the shared `EventUpdateSignal` signal, preventing other
events from being cleared.
## Solution
I've updated the code to have separate signals per event type and added
a shared signal to notify all systems that the time plugin is installed.
## Changelog
- Fixed bug where events were not being dropped
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
## Objective
Currently, events are dropped after two frames. This cadence wasn't
*chosen* for a specific reason, double buffering just lets events
persist for at least two frames. Events only need to be dropped at a
predictable point so that the event queues don't grow forever (i.e.
events should never cause a memory leak).
Events (and especially input events) need to be observable by systems in
`FixedUpdate`, but as-is events are dropped before those systems even
get a chance to see them.
## Solution
Instead of unconditionally dropping events in `First`, require
`FixedUpdate` to first queue the buffer swap (if the `TimePlugin` has
been installed). This way, events are only dropped after a frame that
runs `FixedUpdate`.
## Future Work
In the same way we have independent copies of `Time` for tracking time
in `Main` and `FixedUpdate`, we will need independent copies of `Input`
for tracking press/release status correctly in `Main` and `FixedUpdate`.
--
Every run of `FixedUpdate` covers a specific timespan. For example, if
the fixed timestep `Δt` is 10ms, the first three `FixedUpdate` runs
cover `[0ms, 10ms)`, `[10ms, 20ms)`, and `[20ms, 30ms)`.
`FixedUpdate` can run many times in one frame. For truly
framerate-independent behavior, each `FixedUpdate` should only see the
events that occurred in its covered timespan, but what happens right now
is the first step in the frame reads all pending events.
Fixing that will require timestamped events.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Scheduling low cost systems has significant overhead due to task pool
contention and the extra machinery to schedule and run them. Event
update systems are the prime example of a low cost system, requiring a
guaranteed O(1) operation, and there are a *lot* of them.
## Solution
Add a run condition to every event system so they only run when there is
an event in either of it's two internal Vecs.
---
## Changelog
Changed: Event update systems will not run if there are no events to
process.
## Migration Guide
`Events<T>::update_system` has been split off from the the type and can
be found at `bevy_ecs::event::event_update_system`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
The latest `clippy` release has a much more aggressive application of
the
[`explicit_iter_loop`](https://rust-lang.github.io/rust-clippy/master/index.html#/explicit_into_iter_loop?groups=pedantic)
pedantic lint.
As a result, clippy now suggests the following:
```diff
-for event in events.iter() {
+for event in &mut events {
```
I'm generally in favor of this lint. Using `for mut item in &mut query`
is also recommended over `for mut item in query.iter_mut()` for good
reasons IMO.
But, it is my personal belief that `&mut events` is much less clear than
`events.iter()`.
Why? The reason is that the events from `EventReader` **are not
mutable**, they are immutable references to each event in the event
reader. `&mut events` suggests we are getting mutable access to events —
similarly to `&mut query` — which is not the case. Using `&mut events`
is therefore misleading.
`IntoIterator` requires a mutable `EventReader` because it updates the
internal `last_event_count`, not because it let you mutate it.
So clippy's suggested improvement is a downgrade.
## Solution
Do not implement `IntoIterator` for `&mut events`.
Without the impl, clippy won't suggest its "fix". This also prevents
generally people from using `&mut events` for iterating `EventReader`s,
which makes the ecosystem every-so-slightly better.
---
## Changelog
- Removed `IntoIterator` impl for `&mut EventReader`
## Migration Guide
- `&mut EventReader` does not implement `IntoIterator` anymore. replace
`for foo in &mut events` by `for foo in events.iter()`
# Objective
- Move schedule name into `Schedule` to allow the schedule name to be
used for errors and tracing in Schedule methods
- Fixes#9510
## Solution
- Move label onto `Schedule` and adjust api's on `World` and `Schedule`
to not pass explicit label where it makes sense to.
- add name to errors and tracing.
- `Schedule::new` now takes a label so either add the label or use
`Schedule::default` which uses a default label. `default` is mostly used
in doc examples and tests.
---
## Changelog
- move label onto `Schedule` to improve error message and logging for
schedules.
## Migration Guide
`Schedule::new` and `App::add_schedule`
```rust
// old
let schedule = Schedule::new();
app.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
app.add_schedule(schedule);
```
if you aren't using a label and are using the schedule struct directly
you can use the default constructor.
```rust
// old
let schedule = Schedule::new();
schedule.run(world);
// new
let schedule = Schedule::default();
schedule.run(world);
```
`Schedules:insert`
```rust
// old
let schedule = Schedule::new();
schedules.insert(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
schedules.insert(schedule);
```
`World::add_schedule`
```rust
// old
let schedule = Schedule::new();
world.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
world.add_schedule(schedule);
```
# Objective
Every frame, `Events::update` gets called, which clears out any old
events from the buffer. There should be a way of taking ownership of
these old events instead of throwing them away. My use-case is dumping
old events into a debug menu so they can be inspected later.
One potential workaround is to just have a system that clones any
incoming events and stores them in a list -- however, this requires the
events to implement `Clone`.
## Solution
Add `Events::update_drain`, which returns an iterator of the events that
were removed from the buffer.
# Objective
The name `ManualEventIterator` is long and unnecessary, as this is the
iterator type used for both `EventReader` and `ManualEventReader`.
## Solution
Rename `ManualEventIterator` to `EventIterator`. To ease migration, add
a deprecated type alias with the old name.
---
## Changelog
- The types `ManualEventIterator{WithId}` have been renamed to
`EventIterator{WithId}`.
## Migration Guide
The type `ManualEventIterator` has been renamed to `EventIterator`.
Additonally, `ManualEventIteratorWithId` has been renamed to
`EventIteratorWithId`.
# Objective
Make code relating to event more readable.
Currently the `impl` block of `Events` is split in two, and the big part
of its implementations are put at the end of the file, far from the
definition of the `struct`.
## Solution
- Move and merge the `impl` blocks of `Events` next to its definition.
- Move the `EventSequence` definition and implementations before the
`Events`, because they're pretty trivial and help understand how
`Events` work, rather than being buried bellow `Events`.
I separated those two steps in two commits to not be too confusing. I
didn't modify any code of documentation. I want to do a second PR with
such modifications after this one is merged.
# Objective
Title.
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Be consistent with `Resource`s and `Components` and have `Event` types
be more self-documenting.
Although not susceptible to accidentally using a function instead of a
value due to `Event`s only being initialized by their type, much of the
same reasoning for removing the blanket impl on `Resource` also applies
here.
* Not immediately obvious if a type is intended to be an event
* Prevent invisible conflicts if the same third-party or primitive types
are used as events
* Allows for further extensions (e.g. opt-in warning for missed events)
## Solution
Remove the blanket impl for the `Event` trait. Add a derive macro for
it.
---
## Changelog
- `Event` is no longer implemented for all applicable types. Add the
`#[derive(Event)]` macro for events.
## Migration Guide
* Add the `#[derive(Event)]` macro for events. Third-party types used as
events should be wrapped in a newtype.
# Objective
- `apply_system_buffers` is an unhelpful name: it introduces a new
internal-only concept
- this is particularly rough for beginners as reasoning about how
commands work is a critical stumbling block
## Solution
- rename `apply_system_buffers` to the more descriptive `apply_deferred`
- rename related fields, arguments and methods in the internals fo
bevy_ecs for consistency
- update the docs
## Changelog
`apply_system_buffers` has been renamed to `apply_deferred`, to more
clearly communicate its intent and relation to `Deferred` system
parameters like `Commands`.
## Migration Guide
- `apply_system_buffers` has been renamed to `apply_deferred`
- the `apply_system_buffers` method on the `System` trait has been
renamed to `apply_deferred`
- the `is_apply_system_buffers` function has been replaced by
`is_apply_deferred`
- `Executor::set_apply_final_buffers` is now
`Executor::set_apply_final_deferred`
- `Schedule::apply_system_buffers` is now `Schedule::apply_deferred`
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
Fixes#8528
## Solution
Manually implement `PartialEq`, `Eq`, `PartialOrd`, `Ord`, and `Hash`
for `bevy_ecs::event::EventId`. These new implementations do not rely on
the `Event` implementing the same traits allowing `EventId` to be used
in more cases.
# Objective
Noticed while writing #7728 that we are using `trace!` logs in our event
functions. This has shown to have significant overhead, even trace level
logs are disabled globally, as seen in #7639.
## Solution
Use the `detailed_trace!` macro introduced in #7639. Also removed the
`event_trace` function that was only used in one location.
---
## Changelog
Changed: Event trace logs are now feature gated behind the
`detailed-trace` feature.
Fixes issue mentioned in PR #8285.
_Note: By mistake, this is currently dependent on #8285_
# Objective
Ensure consistency in the spelling of the documentation.
Exceptions:
`crates/bevy_mikktspace/src/generated.rs` - Has not been changed from
licence to license as it is part of a licensing agreement.
Maybe for further consistency,
https://github.com/bevyengine/bevy-website should also be given a look.
## Solution
### Changed the spelling of the current words (UK/CN/AU -> US) :
cancelled -> canceled (Breaking API changes in #8285)
behaviour -> behavior (Breaking API changes in #8285)
neighbour -> neighbor
grey -> gray
recognise -> recognize
centre -> center
metres -> meters
colour -> color
### ~~Update [`engine_style_guide.md`]~~ Moved to #8324
---
## Changelog
Changed UK spellings in documentation to US
## Migration Guide
Non-breaking changes*
\* If merged after #8285
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
# Objective
Fix#5026.
## Solution
Only make a `trace!` log if the event count changed.
---
## Changelog
Changed: `EventWriter::send_batch` will only log a TRACE level log if the batch is non-empty.
# Objective
Continuation of https://github.com/bevyengine/bevy/pull/5719
Now that we have a definable type for the iterator.
---
## Changelog
- Implemented IntoIterator for EventReader so you can now do `&mut reader` instead of `reader.iter()` for events.
# Objective
Motivated by #7469.
`EventReader` iterators use the default implementations for `.nth()` and `.last()`, which includes iterating over and throwing out all events before the desired one.
## Solution
Add specialized implementations for these methods that directly updates the unread event counter and returns a reference to the desired event.
TODO:
- [x] Add a unit test.
- [x] ~~Add a benchmark, to see if the compiler was doing this automatically already.~~ *On second thought, this doesn't feel like a very useful thing to include in the benchmark suite.*
# Objective
Related to #7530.
`EventReader` iterators currently use the default impl for `.count()`, which unnecessarily loops over all unread events.
# Solution
Add specialized impls that mark the `EventReader` as consumed and return the number of unread events.
The `DoubleEndedIterator` impls produce incorrect results on subsequent calls to `iter()` if the iterator is only partially consumed.
The following code shows what happens
```rust
fn next_back_is_bad() {
let mut events = Events::<TestEvent>::default();
events.send(TestEvent { i: 0 });
events.send(TestEvent { i: 1 });
events.send(TestEvent { i: 2 });
let mut reader = events.get_reader();
let mut iter = reader.iter(&events);
assert_eq!(iter.next_back(), Some(&TestEvent { i: 2 }));
assert_eq!(iter.next(), Some(&TestEvent { i: 0 }));
let mut iter = reader.iter(&events);
// `i: 2` event is returned twice! The `i: 1` event is missed.
assert_eq!(iter.next(), Some(&TestEvent { i: 2 }));
assert_eq!(iter.next(), None);
}
```
I don't think this can be fixed without adding some very convoluted bookkeeping.
## Migration Guide
`ManualEventIterator` and `ManualEventIteratorWithId` are no longer `DoubleEndedIterator`s.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Clearing the reader doesn't require iterating the events. Updating the `last_event_count` of the reader is enough.
I rewrote part of the documentation as some of it was incorrect or harder to understand than necessary.
## Changelog
Added `ManualEventReader::clear()`
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Be able to name the type that `ManualEventReader::iter/iter_with_id` returns and `EventReader::iter/iter_with_id` by proxy.
Currently for the purpose of https://github.com/bevyengine/bevy/pull/5719
## Solution
- Create a custom `Iterator` type.
The PR fixes the interface of `EventReader::clear`. Currently, the method consumes the reader, which makes it unusable.
## Changelog
- `EventReader::clear` now takes a mutable reference instead of consuming the event reader.
## Migration Guide
`EventReader::clear` now takes a mutable reference instead of consuming the event reader. This means that `clear` now needs explicit mutable access to the reader variable, which previously could have been omitted in some cases:
```rust
// Old (0.9)
fn clear_events(reader: EventReader<SomeEvent>) {
reader.clear();
}
// New (0.10)
fn clear_events(mut reader: EventReader<SomeEvent>) {
reader.clear();
}
```
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Currently, the `SystemParam` derive forces you to declare the lifetime parameters `<'w, 's>`, even if you don't use them.
If you don't follow this structure, the error message is quite nasty.
### Example (before):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, 's, E: Event> {
events: ResMut<'w, Events<E>>,
// The derive forces us to declare the `'s` lifetime even though we don't use it,
// so we have to add this `PhantomData` to please rustc.
#[system_param(ignore)]
_marker: PhantomData<&'s ()>,
}
```
## Solution
* Allow the user to omit either lifetime.
* Emit a descriptive error if any lifetimes used are invalid.
### Example (after):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, E: Event> {
events: ResMut<'w, Events<E>>,
}
```
---
## Changelog
* The `SystemParam` derive is now more flexible, allowing you to omit unused lifetime parameters.
# Objective
- Reverts #5730.
- Fixes#6173, fixes#6596.
## Solution
Remove the warning entirely.
## Changelog
You will no longer be spammed about
> Missed 31 `bevy_input:🐭:MouseMotion` events. Consider
reading from the `EventReader` more often (generally the best
solution) or calling Events::update() less frequently
(normally this is called once per frame). This problem is most
likely due to run criteria/fixed timesteps or consuming events
conditionally. See the Events documentation for
more information.
when you miss events. These warnings were often (but not always) a false positive. You can still check this manually by using `ManualEventReader::missed_events`
# Objective
- Reduce debugging burden when using events by telling user when they missed an event.
## Solution
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
*This PR description is an edited copy of #5007, written by @alice-i-cecile.*
# Objective
Follow-up to https://github.com/bevyengine/bevy/pull/2254. The `Resource` trait currently has a blanket implementation for all types that meet its bounds.
While ergonomic, this results in several drawbacks:
* it is possible to make confusing, silent mistakes such as inserting a function pointer (Foo) rather than a value (Foo::Bar) as a resource
* it is challenging to discover if a type is intended to be used as a resource
* we cannot later add customization options (see the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/27-derive-component.md) for the equivalent choice for Component).
* dependencies can use the same Rust type as a resource in invisibly conflicting ways
* raw Rust types used as resources cannot preserve privacy appropriately, as anyone able to access that type can read and write to internal values
* we cannot capture a definitive list of possible resources to display to users in an editor
## Notes to reviewers
* Review this commit-by-commit; there's effectively no back-tracking and there's a lot of churn in some of these commits.
*ira: My commits are not as well organized :')*
* I've relaxed the bound on Local to Send + Sync + 'static: I don't think these concerns apply there, so this can keep things simple. Storing e.g. a u32 in a Local is fine, because there's a variable name attached explaining what it does.
* I think this is a bad place for the Resource trait to live, but I've left it in place to make reviewing easier. IMO that's best tackled with https://github.com/bevyengine/bevy/issues/4981.
## Changelog
`Resource` is no longer automatically implemented for all matching types. Instead, use the new `#[derive(Resource)]` macro.
## Migration Guide
Add `#[derive(Resource)]` to all types you are using as a resource.
If you are using a third party type as a resource, wrap it in a tuple struct to bypass orphan rules. Consider deriving `Deref` and `DerefMut` to improve ergonomics.
`ClearColor` no longer implements `Component`. Using `ClearColor` as a component in 0.8 did nothing.
Use the `ClearColorConfig` in the `Camera3d` and `Camera2d` components instead.
Co-authored-by: Alice <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: devil-ira <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Improve documentation, information users of the limitations in bevy's idiomatic patterns, and suggesting alternatives for when those limitations are encountered.
## Solution
* Add documentation to `Commands` informing the user of the option of writing one-shot commands with closures.
* Add documentation to `EventWriter` regarding the limitations of event types, and suggesting alternatives using commands.
# Objective
- It's pretty common to want to check if an EventReader has received one or multiple events while also needing to consume the iterator to "clear" the EventReader.
- The current approach is to do something like `events.iter().count() > 0` or `events.iter().last().is_some()`. It's not immediately obvious that the purpose of that is to consume the events and check if there were any events. My solution doesn't really solve that part, but it encapsulates the pattern.
## Solution
- Add a `.clear()` method that consumes the iterator.
- It takes the EventReader by value to make sure it isn't used again after it has been called.
---
## Migration Guide
Not a breaking change, but if you ever found yourself in a situation where you needed to consume the EventReader and check if there was any events you can now use
```rust
fn system(events: EventReader<MyEvent>) {
if !events.is_empty {
events.clear();
// Process the fact that one or more event was received
}
}
```
Co-authored-by: Charles <IceSentry@users.noreply.github.com>
# Objective
- The code in `events.rs` was a bit messy. There was lots of duplication between `EventReader` and `ManualEventReader`, and the state management code is not needed.
## Solution
- Clean it up.
## Future work
Should we remove the type parameter from `ManualEventReader`?
It doesn't have any meaning outside of its source `Events`. But there's no real reason why it needs to have a type parameter - it's just plain data. I didn't remove it yet to keep the type safety in some of the users of it (primarily related to `&mut World` usage)
Required for https://github.com/bevyengine/bevy/pull/4402.
# Objective
- derived `SystemParam` implementations were never `ReadOnlySystemParamFetch`
- We want them to be, e.g. for `EventReader`
## Solution
- If possible, 'forward' the impl of `ReadOnlySystemParamFetch`.
# Objective
- Remove `Resource` binding on events, introduce a new `Event` trait
- Ensure event iterators are `ExactSizeIterator`
## Solution
- Builds on #2382 and #2969
## Changelog
- Events<T>, EventWriter<T>, EventReader<T> and so on now require that the underlying type is Event, rather than Resource. Both of these are trivial supertraits of Send + Sync + 'static with universal blanket implementations: this change is currently purely cosmetic.
- Event reader iterators now implement ExactSizeIterator
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
