Fixes#1846
Got scared of the other "Requested resource does not exist" error at line 395 in `system_param.rs`, under `impl<'a, T: Component> SystemParamFetch<'a> for ResMutState<T> {`. Someone with better knowledge of the code might be able to go in and improve that one.
Implements `Byteable` and `RenderResource` for any array containing `Byteable` elements. This allows `RenderResources` to be implemented on structs with arbitrarily-sized arrays, among other things:
```rust
#[derive(RenderResources, TypeUuid)]
#[uuid = "2733ff34-8f95-459f-bf04-3274e686ac5f"]
struct Foo {
buffer: [i32; 256],
}
```
The g++ package may not be preinstalled.
Also, replaced the mention of "fast" compiles, with generic instructions about how to install clang; this is because on my test system, clang didn't make any difference, and it's likely not to do any in general, as it is a relatively small part of the build.
Closes#1294.
From suggestion from Godot workflows: https://github.com/bevyengine/bevy/issues/1730#issuecomment-810321110
* Add a feature `bevy_debug` that will make Bevy read a debug config file to setup some debug systems
* Currently, only one that will exit after x frames
* Could add option to dump screen to image file once that's possible
* Add a job in CI workflow that will run a few examples using [`swiftshader`](https://github.com/google/swiftshader)
* This job takes around 13 minutes, so doesn't add to global CI duration
|example|number of frames|duration|
|-|-|-|
|`alien_cake_addict`|300|1:50|
|`breakout`|1800|0:44|
|`contributors`|1800|0:43|
|`load_gltf`|300|2:37|
|`scene`|1800|0:44|
Fixes#1809. It makes it also possible to use `derive` for `SystemParam` inside ECS and avoid manual implementation. An alternative solution to macro changes is to use `use crate as bevy_ecs;` in `event.rs`.
The existing issue templates don't fit well for "the docs are not very good" and are too high friction.
This is intended as a very-low friction tool to provide the basis for more thorough docs PRs.
The `VertexBufferLayout` returned by `crates\bevy_render\src\mesh\mesh.rs:308` was unstable, because `HashMap.iter()` has a random order. This caused the pipeline_compiler to wrongly consider a specialization to be different (`crates\bevy_render\src\pipeline\pipeline_compiler.rs:123`), causing each mesh changed event to potentially result in a different `PipelineSpecialization`. This in turn caused `Draw` to emit a `set_pipeline` much more often than needed.
This fix shaves off a `BindPipeline` and two `BindDescriptorSets` (for the Camera and for global renderresources) for every mesh after the first that can now use the same specialization, where it didn't before (which was random).
`StableHashMap` was not a good replacement, because it isn't `Clone`, so instead I replaced it with a `BTreeMap` which is OK in this instance, because there shouldn't be many insertions on `Mesh.attributes` after the mesh is created.
related to #1700
This PR:
* documents all methods on `Input<T>`
* adds documentation on the struct about how to use it, and how to implement it for a new input type
* renames method `update` to a easier to understand `clear`
* adds two methods to check for state and clear it after, allowing easier use in the case of #1700
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
- prints glsl compile error message in multiple lines instead of `thread 'main' panicked at 'called Result::unwrap() on an Err value: Compilation("glslang_shader_parse:\nInfo log:\nERROR: 0:335: \'assign\' : l-value required \"anon@7\" (can\'t modify a uniform)\nERROR: 0:335: \'\' : compilation terminated \nERROR: 2 compilation errors. No code generated.\n\n\nDebug log:\n\n")', crates/bevy_render/src/pipeline/pipeline_compiler.rs:161:22`
- makes gltf error messages have more context
New error:
```rust
thread 'Compute Task Pool (5)' panicked at 'Shader compilation error:
glslang_shader_parse:
Info log:
ERROR: 0:12: 'assign' : l-value required "anon@1" (can't modify a uniform)
ERROR: 0:12: '' : compilation terminated
ERROR: 2 compilation errors. No code generated.
', crates/bevy_render/src/pipeline/pipeline_compiler.rs:364:5
```
These changes are a bit unrelated. I can open separate PRs if someone wants that.
Bumps [github/super-linter](https://github.com/github/super-linter) from v3.15.2 to v3.15.5.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/github/super-linter/releases">github/super-linter's releases</a>.</em></p>
<blockquote>
<h2>Release v3.15.5</h2>
<p>No release notes provided.</p>
<h2>Release v3.15.3</h2>
<h2>Changelog</h2>
<ul>
<li>Updated Deployment scripts</li>
<li>Updated Security Scripts</li>
<li>Support <code>.env.*</code> for various <code>.env</code> files</li>
</ul>
<h2>Bugs</h2>
<ul>
<li>Various security bumps</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="286abe2b03"><code>286abe2</code></a> Updating action.yml with new release version</li>
<li><a href="1d0751b749"><code>1d0751b</code></a> cleanup (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1378">#1378</a>)</li>
<li><a href="be0e288e1e"><code>be0e288</code></a> Bump cljkondo/clj-kondo from 2021.03.03-alpine to 2021.03.22-alpine (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1379">#1379</a>)</li>
<li><a href="8ff48a47d3"><code>8ff48a4</code></a> Bump isort from 5.7.0 to 5.8.0 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1382">#1382</a>)</li>
<li><a href="55cc19dbbc"><code>55cc19d</code></a> Bump immer from 8.0.3 to 9.0.1 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1381">#1381</a>)</li>
<li><a href="a68b522bc1"><code>a68b522</code></a> Bump sql-lint from 0.0.15 to 0.0.16 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1380">#1380</a>)</li>
<li><a href="701fd3b339"><code>701fd3b</code></a> Adding a11y eslint to npm dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1375">#1375</a>)</li>
<li><a href="4016de6222"><code>4016de6</code></a> Bump immer from 8.0.2 to 8.0.3 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1376">#1376</a>)</li>
<li><a href="43e054faf7"><code>43e054f</code></a> Bump immer from 8.0.1 to 8.0.2 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1374">#1374</a>)</li>
<li><a href="46d76783c7"><code>46d7678</code></a> Bump eslint-plugin-jest from 24.3.1 to 24.3.2 in /dependencies (<a href="https://github-redirect.dependabot.com/github/super-linter/issues/1372">#1372</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/github/super-linter/compare/v3.15.2...286abe2b0349da9c074c0fed8e8ec0a86cd13279">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
After an inquiry on Reddit about support for Directional Lights and the unused properties on Light, I wanted to clean it up, to hopefully make it ever so slightly more clear for anyone wanting to add additional light types.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
After #1697 I looked at all other Iterators from Bevy and added overrides for `size_hint` where it wasn't done.
Also implemented `ExactSizeIterator` where applicable.
I was looking into "lower level" rendering and I saw no example on how to do that. Yet, I think it's something relevant to show, so I set up a simple example on how to do that. I hope it's welcome.
I'm not confident about the code and a review is definitely nice to have, especially because there are a few things that are not great.
Specifically, I think it would be nice to see how to render with a completely custom set of attributes (position and color, in this case), but I couldn't manage to get it working without normals and uv.
It makes sense if bevy Meshes need these two attributes, but I'm not sure about it.
Co-authored-by: Alessandro Re <ale@ale-re.net>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
This PR fixes https://github.com/bevyengine/bevy/issues/1240, where the ball is escaping the playing field at low framerates. I did this by moving the movement and physics system into a Fixed Timestep system set and changing the movement steps to a constant. So we lose the example use of delta_time for changing position, but gain a use of FixedTimestep.
If this is accepted https://github.com/bevyengine/bevy-website/pull/102 will need to be updated to match.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
This reduces the size of executables when using bevy as dylib by
ensuring that they get codegened in bevy_assets instead of the game
itself. This by extension avoids pulling in parts of bevy_tasks and
async_task.
Before this change the breakout example was 923k big after this change
it is only 775k big for cg_clif. For cg_llvm in release mode breakout
shrinks from 356k to 316k. For cg_llvm in debug mode breakout shrinks
from 3814k to 3057k.
In shaders, `vec3` should be avoided for `std140` layout, as they take the size of a `vec4` and won't support manual padding by adding an additional `float`.
This change is needed for 3D to work in WebGL2. With it, I get PBR to render
<img width="1407" alt="Screenshot 2021-04-02 at 02 57 14" src="https://user-images.githubusercontent.com/8672791/113368551-5a3c2780-935f-11eb-8c8d-e9ba65b5ee98.png">
Without it, nothing renders... @cart Could this be considered for 0.5 release?
Also, I learned shaders 2 days ago, so don't hesitate to correct any issue or misunderstanding I may have
bevy_webgl2 PR in progress for Bevy 0.5 is here if you want to test: https://github.com/rparrett/bevy_webgl2/pull/1
fixes#1772
1st commit: the limit was at 11 as the macro was not using a range including the upper end. I changed that as it feels the purpose of the macro is clearer that way.
2nd commit: as suggested in the `// TODO`, I added a `Config` trait to go to 16 elements tuples. This means that if someone has a custom system parameter with a config that is not a tuple or an `Option`, they will have to implement `Config` for it instead of the standard `Default`.
I think [collection, thing_removed_from_collection] is a more natural order than [thing_removed_from_collection, collection]. Just a small tweak that I think we should include in 0.5.
This is a temporary fix for the CI (and anyone building for wasm) break until `wgpu` can update
* `syn` released a version that fixed a bug in how they parsed attributes
* `wasm_bindgen` released a version that uses that fix
* but we're stuck with old `wasm_bindgen` as `wgpu` uses a fixed version: c5ee9cd983/Cargo.toml (L118)
So, to fix this, either we update everyone to latest version of `wasm_bindgen` or we keep using old version of `syn`.
On Bevy side, it should be faster to fix the version of `syn` to one that works.
More details: https://github.com/rustwasm/wasm-bindgen/pull/2510 & https://github.com/rustwasm/wasm-bindgen/issues/2508
This PR adds normal maps on top of PBR #1554. Once that PR lands, the changes should look simpler.
Edit: Turned out to be so little extra work, I added metallic/roughness texture too. And occlusion and emissive.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
The only API to add a parent/child relationship between existing entities is through commands, there is no easy way to do it from `World`. Manually inserting the components is not completely possible since `PreviousParent` has no public constructor.
This PR adds two methods to set entities as children of an `EntityMut`: `insert_children` and `push_children`. ~~The API is similar to the one on `Commands`, except that the parent is the `EntityMut`.~~ The API is the same as in #1703.
However, the `Parent` and `Children` components are defined in `bevy_transform` which depends on `bevy_ecs`, while `EntityMut` is defined in `bevy_ecs`, so the methods are added to the `BuildWorldChildren` trait instead.
If #1545 is merged this should be fixed too.
I'm aware cart was experimenting with entity hierarchies, but unless it's a coming soon this PR would be useful to have meanwhile.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Load textures from gltf as linear when needed.
This is for #1632, but can be done independently and won't have any visible impact before.
* during iteration over materials, register textures that need to be loaded as linear
* during iteration over textures
* directly load bytes from external files instead of adding them as dependencies in the load context
* configure the texture the same way for buffered and external textures
* if the texture is linear rgb, set as linear rgb
Fixes#1753.
The problem was introduced while reworking the logic around stages' own criteria. Before #1675 they used to be stored and processed inline with the systems' criteria, and systems without criteria used that of their stage. After, criteria-less systems think they should run, always. This PR more or less restores previous behavior; a less cludge solution can wait until after 0.5 - ideally, until stageless.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Frustum culling has some pretty major gaps right now (such as not supporting sprite transform scaling and not taking into account projections). It should be disabled by default until it provides a solid experience across all bevy use cases.
