# Objective
I was trying to add some `Diagnostics` to have a better break down of
performance but I noticed that the current implementation uses a
`ResMut` which forces the functions to all run sequentially whereas
before they could run in parallel. This created too great a performance
penalty to be usable.
## Solution
This PR reworks how the diagnostics work with a couple of breaking
changes. The idea is to change how `Diagnostics` works by changing it to
a `SystemParam`. This allows us to hold a `Deferred` buffer of
measurements that can be applied later, avoiding the need for multiple
mutable references to the hashmap. This means we can run systems that
write diagnostic measurements in parallel.
Firstly, we rename the old `Diagnostics` to `DiagnosticsStore`. This
clears up the original name for the new interface while allowing us to
preserve more closely the original API.
Then we create a new `Diagnostics` struct which implements `SystemParam`
and contains a deferred `SystemBuffer`. This can be used very similar to
the old `Diagnostics` for writing new measurements.
```rust
fn system(diagnostics: ResMut<Diagnostics>) { diagnostics.new_measurement(ID, || 10.0)}
// changes to
fn system(mut diagnostics: Diagnostics) { diagnostics.new_measurement(ID, || 10.0)}
```
For reading the diagnostics, the user needs to change from `Diagnostics`
to `DiagnosticsStore` but otherwise the function calls are the same.
Finally, we add a new method to the `App` for registering diagnostics.
This replaces the old method of creating a startup system and adding it
manually.
Testing it, this PR does indeed allow Diagnostic systems to be run in
parallel.
## Changelog
- Change `Diagnostics` to implement `SystemParam` which allows
diagnostic systems to run in parallel.
## Migration Guide
- Register `Diagnostic`'s using the new
`app.register_diagnostic(Diagnostic::new(DIAGNOSTIC_ID,
"diagnostic_name", 10));`
- In systems for writing new measurements, change `mut diagnostics:
ResMut<Diagnostics>` to `mut diagnostics: Diagnostics` to allow the
systems to run in parallel.
- In systems for reading measurements, change `diagnostics:
Res<Diagnostics>` to `diagnostics: Res<DiagnosticsStore>`.
# Objective
- Introduce a stable alternative to
[`std::any::type_name`](https://doc.rust-lang.org/std/any/fn.type_name.html).
- Rewrite of #5805 with heavy inspiration in design.
- On the path to #5830.
- Part of solving #3327.
## Solution
- Add a `TypePath` trait for static stable type path/name information.
- Add a `TypePath` derive macro.
- Add a `impl_type_path` macro for implementing internal and foreign
types in `bevy_reflect`.
---
## Changelog
- Added `TypePath` trait.
- Added `DynamicTypePath` trait and `get_type_path` method to `Reflect`.
- Added a `TypePath` derive macro.
- Added a `bevy_reflect::impl_type_path` for implementing `TypePath` on
internal and foreign types in `bevy_reflect`.
- Changed `bevy_reflect::utility::(Non)GenericTypeInfoCell` to
`(Non)GenericTypedCell<T>` which allows us to be generic over both
`TypeInfo` and `TypePath`.
- `TypePath` is now a supertrait of `Asset`, `Material` and
`Material2d`.
- `impl_reflect_struct` needs a `#[type_path = "..."]` attribute to be
specified.
- `impl_reflect_value` needs to either specify path starting with a
double colon (`::core::option::Option`) or an `in my_crate::foo`
declaration.
- Added `bevy_reflect_derive::ReflectTypePath`.
- Most uses of `Ident` in `bevy_reflect_derive` changed to use
`ReflectTypePath`.
## Migration Guide
- Implementors of `Asset`, `Material` and `Material2d` now also need to
derive `TypePath`.
- Manual implementors of `Reflect` will need to implement the new
`get_type_path` method.
## Open Questions
- [x] ~This PR currently does not migrate any usages of
`std::any::type_name` to use `bevy_reflect::TypePath` to ease the review
process. Should it?~ Migration will be left to a follow-up PR.
- [ ] This PR adds a lot of `#[derive(TypePath)]` and `T: TypePath` to
satisfy new bounds, mostly when deriving `TypeUuid`. Should we make
`TypePath` a supertrait of `TypeUuid`? [Should we remove `TypeUuid` in
favour of
`TypePath`?](2afbd85532 (r961067892))
# Objective
- Continue with #8685 to make `TonyMcMapface` the default tonemapping
## Solution
- Change the default value `Camera3dBundle::tonemapping` from
`Tonemapping::ReinhardLuminance` to `Default::default()`
(`Tonemapping::TonyMcMapface`)
# Objective
- `apply_system_buffers` is an unhelpful name: it introduces a new
internal-only concept
- this is particularly rough for beginners as reasoning about how
commands work is a critical stumbling block
## Solution
- rename `apply_system_buffers` to the more descriptive `apply_deferred`
- rename related fields, arguments and methods in the internals fo
bevy_ecs for consistency
- update the docs
## Changelog
`apply_system_buffers` has been renamed to `apply_deferred`, to more
clearly communicate its intent and relation to `Deferred` system
parameters like `Commands`.
## Migration Guide
- `apply_system_buffers` has been renamed to `apply_deferred`
- the `apply_system_buffers` method on the `System` trait has been
renamed to `apply_deferred`
- the `is_apply_system_buffers` function has been replaced by
`is_apply_deferred`
- `Executor::set_apply_final_buffers` is now
`Executor::set_apply_final_deferred`
- `Schedule::apply_system_buffers` is now `Schedule::apply_deferred`
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
Fixes#8596
## Solution
Change interface of the trait Map. Adjust implementations of this trait
---
## Changelog
### Changed
- Interface of Map trait
### Added
- `Map::get_at_mut`
## Migration Guide
Every implementor of Map trait would need to implement `get_at_mut`.
Which, judging by changes in this PR, should be fairly trivial.
- Supress false positive `redundant_clone` lints.
- Supress inactionable `result_large_err` lint.
Most of the size(50 out of 68 bytes) is coming from
`naga::WithSpan<naga::valid::ValidationError>`
# Objective
- Make the dependency job successful again
## Solution
- Update the list of duplicates
- Remove a security issue exception not needed anymore
- Also update a dependency that was missed by dependabot
# Objective
Right now it's impossible to construct a MapIter outside of the
bevy_reflect crate, making it impossible to implement the Map trait for
custom map types.
## Solution
Addition of a pub constructor to MapIter.
Updates the requirements on
[android_log-sys](https://github.com/nercury/android_log-sys-rs) to
permit the latest version.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/nercury/android_log-sys-rs/commits">compare
view</a></li>
</ul>
</details>
<br />
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>> **Note**
> Automatic rebases have been disabled on this pull request as it has
been open for over 30 days.
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
The `Condition` trait is only implemented for systems and system
functions that take no input. This can make it awkward to write
conditions that are intended to be used with system piping.
## Solution
Add an `In` generic to the trait. It defaults to `()`.
---
## Changelog
- Made the `Condition` trait generic over system inputs.
# Objective
- Fix Wayland window client side decorations issue on Gnome Wayland,
fixes#3301.
## Solution
- One simple one line solution: Add winit's `wayland-csd-adwaita`
feature to Bevy's `wayland` feature.
Copied from
https://github.com/bevyengine/bevy/issues/3301#issuecomment-1569611257:
### Investigation
1. Gnome forced Wayland apps to implement CSD, whether on their own or
using some libraries like Gnome's official solution
[libdecor](https://gitlab.freedesktop.org/libdecor/libdecor). Many Linux
apps do this with libdecor, like blender, kitty... I think it's not
comfortable for Bevy to fix this problem this way.
2. Winit has support for CSD on
wayland(8bb004a1d9/Cargo.toml (L42)),
but Bevy disabled Winit's default features, thus no winit's
`wayland-csd-adwaita` feature. And Bevy's `wayland` feature doesn't
include winit's `wayland-csd-adwaita` feature so users can't get window
decorations on Wayland even with Bevy's `wayland` feature enabled.
3. Many rust UI toolkit, like iced, doesn't disable winit's
`wayland-csd-adwaita` feature.
### Conclusion and one Possible solution
Bevy disabled `winit`'s default features in order to decrease package
size. But I think it's acceptable to add `winit`'s `wayland-csd-adwaita`
feature to Bevy's `wayland` feature gate to fix this issue easily for
this only add on crate: sctk-adwaita.
# Objective
Several of our built-in `Command` types are too public:
- `GetOrSpawn` is public, even though it only makes sense to call it
from within `Commands::get_or_spawn`.
- `Remove` and `RemoveResource` contain public `PhantomData` marker
fields.
## Solution
Remove `GetOrSpawn` and use an anonymous command. Make the marker fields
private.
---
## Migration Guide
The `Command` types `Remove` and `RemoveResource` may no longer be
constructed manually.
```rust
// Before:
commands.add(Remove::<T> {
entity: id,
phantom: PhantomData,
});
// After:
commands.add(Remove::<T>::new(id));
// Before:
commands.add(RemoveResource::<T> { phantom: PhantomData });
// After:
commands.add(RemoveResource::<T>::new());
```
The command type `GetOrSpawn` has been removed. It was not possible to
use this type outside of `bevy_ecs`.
## Objective
- Provide a way to use `CubicCurve` non-iter methods
- Accept a `FnMut` over a `fn` pointer on `iter_samples`
- Improve `build_*_cubic_100_points` benchmark by -45% (this means they
are twice as fast)
### Solution
Previously, the only way to iterate over an evenly spaced set of points
on a `CubicCurve` was to use one of the `iter_*` methods.
The return value of those methods were bound by `&self` lifetime, making
them unusable in certain contexts.
Furthermore, other `CubicCurve` methods (`position`, `velocity`,
`acceleration`) required normalizing `t` over the `CubicCurve`'s
internal segment count.
There were no way to access this segment count, making those methods
pretty much unusable.
The newly added `segment_count` allows accessing the segment count.
`iter_samples` used to accept a `fn`, a function pointer. This is
surprising and contrary to the rust stdlib APIs, which accept `Fn`
traits for `Iterator` combinators.
`iter_samples` now accepts a `FnMut`.
I don't trust a bit the bevy benchmark suit, but according to it, this
doubles (-45%) the performance on the `build_pos_cubic_100_points` and
`build_accel_cubic_100_points` benchmarks.
---
## Changelog
- Added the `CubicCurve::segments` method to access the underlying
segments of a cubic curve
- Allow closures as `CubicCurve::iter_samples` `sample_function`
argument.
# Objective
Add documentation to `Query` and `QueryState` errors in bevy_ecs
(`QuerySingleError`, `QueryEntityError`, `QueryComponentError`)
## Solution
- Change display message for `QueryEntityError::QueryDoesNotMatch`: this
error can also happen when the entity has a component which is filtered
out (with `Without<C>`)
- Fix wrong reference in the documentation of `Query::get_component` and
`Query::get_component_mut` from `QueryEntityError` to
`QueryComponentError`
- Complete the documentation of the three error enum variants.
- Add examples for `QueryComponentError::MissingReadAccess` and
`QueryComponentError::MissingWriteAccess`
- Add reference to `QueryState` in `QueryEntityError`'s documentation.
---
## Migration Guide
Expect `QueryEntityError::QueryDoesNotMatch`'s display message to
change? Not sure that counts.
---------
Co-authored-by: harudagondi <giogdeasis@gmail.com>
# Objective
- Make #8015 easier to review;
## Solution
- This commit contains changes not directly related to transmission
required by #8015, in easier-to-review, one-change-per-commit form.
---
## Changelog
### Fixed
- Clear motion vector prepass using `0.0` instead of `1.0`, to avoid TAA
artifacts on transparent objects against the background;
### Added
- The `E` mathematical constant is now available for use in shaders,
exposed under `bevy_pbr::utils`;
- A new `TAA` shader def is now available, for conditionally enabling
shader logic via `#ifdef` when TAA is enabled; (e.g. for jittering
texture samples)
- A new `FallbackImageZero` resource is introduced, for when a fallback
image filled with zeroes is required;
- A new `RenderPhase<I>::render_range()` method is introduced, for
render phases that need to render their items in multiple parceled out
“steps”;
### Changed
- The `MainTargetTextures` struct now holds both `Texture` and
`TextureViews` for the main textures;
- The fog shader functions under `bevy_pbr::fog` now take the a `Fog`
structure as their first argument, instead of relying on the global
`fog` uniform;
- The main textures can now be used as copy sources;
## Migration Guide
- `ViewTarget::main_texture()` and `ViewTarget::main_texture_other()`
now return `&Texture` instead of `&TextureView`. If you were relying on
these methods, replace your usage with
`ViewTarget::main_texture_view()`and
`ViewTarget::main_texture_other_view()`, respectively;
- `ViewTarget::sampled_main_texture()` now returns `Option<&Texture>`
instead of a `Option<&TextureView>`. If you were relying on this method,
replace your usage with `ViewTarget::sampled_main_texture_view()`;
- The `apply_fog()`, `linear_fog()`, `exponential_fog()`,
`exponential_squared_fog()` and `atmospheric_fog()` functions now take a
configurable `Fog` struct. If you were relying on them, update your
usage by adding the global `fog` uniform as their first argument;
Change the default tonemapping method from ReinhardLuminance to
TonyMcMapface, which generally looks nicer and works out of the box with
bloom.
---
## Changelog
- TonyMcMapface is now the default tonemapper, instead of
ReinhardLuminance.
## Migration Guide
- The default tonemapper has been changed from ReinhardLuminance to
TonyMcMapface. Explicitly set ReinhardLuminance on your cameras to get
back the previous look.
# Objective
When using `FromReflect`, fields can be optionally left out if they are
marked with `#[reflect(default)]`. This is very handy for working with
serialized data as giant structs only need to list a subset of defined
fields in order to be constructed.
<details>
<summary>Example</summary>
Take the following struct:
```rust
#[derive(Reflect, FromReflect)]
struct Foo {
#[reflect(default)]
a: usize,
#[reflect(default)]
b: usize,
#[reflect(default)]
c: usize,
#[reflect(default)]
d: usize,
}
```
Since all the fields are default-able, we can successfully call
`FromReflect` on deserialized data like:
```rust
(
"foo::Foo": (
// Only set `b` and default the rest
b: 123
)
)
```
</details>
Unfortunately, this does not work with fields in enum variants. Marking
a variant field as `#[reflect(default)]` does nothing when calling
`FromReflect`.
## Solution
Allow enum variant fields to define a default value using
`#[reflect(default)]`.
### `#[reflect(Default)]`
One thing that structs and tuple structs can do is use their `Default`
implementation when calling `FromReflect`. Adding `#[reflect(Default)]`
to the struct or tuple struct both registers `ReflectDefault` and alters
the `FromReflect` implementation to use `Default` to generate any
missing fields.
This works well enough for structs and tuple structs, but for enums it's
not as simple. Since the `Default` implementation for an enum only
covers a single variant, it's not as intuitive as to what the behavior
will be. And (imo) it feels weird that we would be able to specify
default values in this way for one variant but not the others.
Because of this, I chose to not implement that behavior here. However,
I'm open to adding it in if anyone feels otherwise.
---
## Changelog
- Allow enum variant fields to define a default value using
`#[reflect(default)]`
# Objective
Fix#7833.
Safety comments in the multi-threaded executor don't really talk about
system world accesses, which makes it unclear if the code is actually
valid.
## Solution
Update the `System` trait to use `UnsafeWorldCell`. This type's API is
written in a way that makes it much easier to cleanly maintain safety
invariants. Use this type throughout the multi-threaded executor, with a
liberal use of safety comments.
---
## Migration Guide
The `System` trait now uses `UnsafeWorldCell` instead of `&World`. This
type provides a robust API for interior mutable world access.
- The method `run_unsafe` uses this type to manage world mutations
across multiple threads.
- The method `update_archetype_component_access` uses this type to
ensure that only world metadata can be used.
```rust
let mut system = IntoSystem::into_system(my_system);
system.initialize(&mut world);
// Before:
system.update_archetype_component_access(&world);
unsafe { system.run_unsafe(&world) }
// After:
system.update_archetype_component_access(world.as_unsafe_world_cell_readonly());
unsafe { system.run_unsafe(world.as_unsafe_world_cell()) }
```
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Right now we can't really benefit from [early depth
testing](https://www.khronos.org/opengl/wiki/Early_Fragment_Test) in our
PBR shader because it includes codepaths with `discard`, even for
situations where they are not necessary.
## Solution
- This PR introduces a new `MeshPipelineKey` and shader def,
`MAY_DISCARD`;
- All possible material/mesh options that that may result in `discard`s
being needed must set `MAY_DISCARD` ahead of time:
- Right now, this is only `AlphaMode::Mask(f32)`, but in the future
might include other options/effects; (e.g. one effect I'm personally
interested in is bayer dither pseudo-transparency for LOD transitions of
opaque meshes)
- Shader codepaths that can `discard` are guarded by an `#ifdef
MAY_DISCARD` preprocessor directive:
- Right now, this is just one branch in `alpha_discard()`;
- If `MAY_DISCARD` is _not_ set, the `@early_depth_test` attribute is
added to the PBR fragment shader. This is a not yet documented, possibly
non-standard WGSL extension I found browsing Naga's source code. [I
opened a PR to document it
there](https://github.com/gfx-rs/naga/pull/2132). My understanding is
that for backends where this attribute is supported, it will force an
explicit opt-in to early depth test. (e.g. via
`layout(early_fragment_tests) in;` in GLSL)
## Caveats
- I included `@early_depth_test` for the sake of us being explicit, and
avoiding the need for the driver to be “smart” about enabling this
feature. That way, if we make a mistake and include a `discard`
unguarded by `MAY_DISCARD`, it will either produce errors or noticeable
visual artifacts so that we'll catch early, instead of causing a
performance regression.
- I'm not sure explicit early depth test is supported on the naga Metal
backend, which is what I'm currently using, so I can't really test the
explicit early depth test enable, I would like others with Vulkan/GL
hardware to test it if possible;
- I would like some guidance on how to measure/verify the performance
benefits of this;
- If I understand it correctly, this, or _something like this_ is needed
to fully reap the performance gains enabled by #6284;
- This will _most definitely_ conflict with #6284 and #6644. I can fix
the conflicts as needed, depending on whether/the order they end up
being merging in.
---
## Changelog
### Changed
- Early depth tests are now enabled whenever possible for meshes using
`StandardMaterial`, reducing the number of fragments evaluated for
scenes with lots of occlusions.
# Objective
Fix#8604
## Solution
Use `.add_srgb_suffix()` when creating the screenshot texture.
Allow converting `Bgra8Unorm` images.
Only a two line change for the fix, the `screenshot.rs` changes are just
a bit of cleanup.
# Objective
Fix warnings:
```rs
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:147:13
|
147 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
warning: variable does not need to be mutable
--> /bevy/crates/bevy_app/src/plugin_group.rs:161:13
|
161 | let mut plugin_entry = self
| ----^^^^^^^^^^^^
| |
| help: remove this `mut`
warning: `bevy_app` (lib) generated 2 warnings (run `cargo fix --lib -p bevy_app` to apply 2 suggestions)
warning: variable does not need to be mutable
--> /bevy/crates/bevy_render/src/view/window.rs:126:13
|
126 | ... let mut extracted_window = extracted_windows.entry(entity).or_insert(Extracte...
| ----^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_mut)]` on by default
warning: `bevy_render` (lib) generated 1 warning (run `cargo fix --lib -p bevy_render` to apply 1 suggestion)
```
## Solution
- Remove the mut keyword in those variables.
# Objective
Reduce missing docs warning noise when building examples for wasm
## Solution
Added "#[allow(missing_docs)]" on the wasm specific version of
BoxedFuture
# Objective
- Allow for directly call methods on states without first calling
`state.get().my_method()`
## Solution
- Implement `Deref` for `State<S>` with `Target = S`
---
*I did not implement `DerefMut` because states hold no data and should
only be changed via `NextState::set()`*
# Objective
- If I understand correctly, forward points in `direction`, so the
negative of `direction` should be back.
## Migration Guide
- `Transform::look_to` method changed default value of
`direction.try_normalize()` from `Vec3::Z` to `Vec3::NEG_Z`
# Objective
- Since the `RequestRedraw` event triggers the bevy app to run `update`
in `bevy_app::app::App`, the documentation should state that all the
windows in the application and its sub-apps are going to get redrawn,
rather than a single window.
## Solution
- Change `RequestRedraw` documentation in `bevy_window` to mention every
window.
# Objective
Make `Material2dPipeline` reusable. This was already done for PBR
materials in #7548.
## Solution
Expose `extract_materials_2d`, `prepare_materials_2d` and
`ExtractedMaterials2d`.
---
## Changelog
- bevy_sprite: Make `prepare_materials_2d`, `extract_materials_2d` and
`ExtractedMaterials2d` public.
Updates the requirements on
[libloading](https://github.com/nagisa/rust_libloading) to permit the
latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="83b1037f21"><code>83b1037</code></a>
Release 0.8.0</li>
<li><a
href="a6a394a7ef"><code>a6a394a</code></a>
bump MSRV to 1.48</li>
<li><a
href="c7955a761e"><code>c7955a7</code></a>
Replace winapi with windows-sys</li>
<li><a
href="95d03a1ddf"><code>95d03a1</code></a>
Add support for QNX Neutrino</li>
<li><a
href="6e284984ae"><code>6e28498</code></a>
Fix CI</li>
<li><a
href="95a0f62e8f"><code>95a0f62</code></a>
Placate clippy</li>
<li><a
href="224a3def35"><code>224a3de</code></a>
Release 0.7.4</li>
<li><a
href="bd17713dcc"><code>bd17713</code></a>
Support AIX dyld constants</li>
<li><a
href="6e07929736"><code>6e07929</code></a>
fix typo</li>
<li><a
href="6b33651a90"><code>6b33651</code></a>
Construct a PathBuf</li>
<li>Additional commits viewable in <a
href="https://github.com/nagisa/rust_libloading/compare/0.7.0...0.8.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Updates the requirements on
[sysinfo](https://github.com/GuillaumeGomez/sysinfo) to permit the
latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.29.0</h1>
<ul>
<li>Add <code>ProcessExt::effective_user_id</code> and
<code>ProcessExt::effective_group_id</code>.</li>
<li>Rename <code>DiskType</code> into <code>DiskKind</code>.</li>
<li>Rename <code>DiskExt::type_</code> into
<code>DiskExt::kind</code>.</li>
<li>macOS: Correctly handle <code>ProcessStatus</code> and remove public
<code>ThreadStatus</code> field.</li>
<li>Windows 11: Fix CPU core usage.</li>
</ul>
<h1>0.28.4</h1>
<ul>
<li>macOS: Improve CPU computation.</li>
<li>Strengthen a process test (needed for debian).</li>
</ul>
<h1>0.28.3</h1>
<ul>
<li>FreeBSD/Windows: Add missing frequency for global CPU.</li>
<li>macOS: Fix used memory computation.</li>
<li>macOS: Improve available memory computation.</li>
<li>Windows: Fix potential panic when getting process data.</li>
</ul>
<h1>0.28.2</h1>
<ul>
<li>Linux: Improve CPU usage computation.</li>
</ul>
<h1>0.28.1</h1>
<ul>
<li>macOS: Fix overflow when computing CPU usage.</li>
</ul>
<h1>0.28.0</h1>
<ul>
<li>Linux: Fix name and CPU usage for processes tasks.</li>
<li>unix: Keep all users, even "not real" accounts.</li>
<li>Windows: Use SID for Users ID.</li>
<li>Fix C API.</li>
<li>Disable default cdylib compilation.</li>
<li>Add <code>serde</code> feature to enable serialization.</li>
<li>Linux: Handle <code>Idle</code> state in
<code>ProcessStatus</code>.</li>
<li>Linux: Add brand and name of ARM CPUs.</li>
</ul>
<h1>0.27.8</h1>
<ul>
<li>macOS: Fix overflow when computing CPU usage.</li>
</ul>
<h1>0.27.7</h1>
<ul>
<li>macOS: Fix process CPU usage computation</li>
<li>Linux: Improve ARM CPU <code>brand</code> and <code>name</code>
information.</li>
<li>Windows: Fix resource leak.</li>
<li>Documentation improvements.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/GuillaumeGomez/sysinfo/commits">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Fixes#7352
## Solution
GLES doesn't support binding specific mip levels for sampling. Fallback
to using separate textures instead.
-
[wgpu-hal/src/gles/device.rs](628a95cd1c/wgpu-hal/src/gles/device.rs (L1038))
---
---------
Co-authored-by: Wilhelm Vallrand <>
# Objective
This method has no documentation and it's extremely unclear what it
does, or what the returned tick represents.
## Solution
Write documentation.
# Objective
- Update dependencies `ruzstd` and `basis-universal`
- Alternative to #5278 and #8133
## Solution
- Update the dependencies, fix the code
- Bevy now also depend on `syn@2` so it's not a blocker to update
`ruzstd` anymore
# Objective
Fix an out-of-date doc string.
The old doc string says "returns None if …" and "for a given
descriptor",
but this method neither takes an argument or returns an `Option`.
# Objective
Add support for the [Netpbm](https://en.wikipedia.org/wiki/Netpbm) image
formats, behind a `pnm` feature flag.
My personal use case for this was robotics applications, with `pgm`
being a popular format used in the field to represent world maps in
robots.
I chose the formats and feature name by checking the logic in
[image.rs](a35ed552fa/crates/bevy_render/src/texture/image.rs (L76))
## Solution
Quite straightforward, the `pnm` feature flag already exists in the
`image` crate so it's just creating and exposing a `pnm` feature flag in
the root `Cargo.toml` and forwarding it through `bevy_internal` and
`bevy_render` all the way to the `image` crate.
---
## Changelog
### Added
`pnm` feature to add support for `pam`, `pbm`, `pgm` and `ppm` image
formats.
---------
Signed-off-by: Luca Della Vedova <lucadv@intrinsic.ai>
# Objective
Bevy code tends to make heavy use of the [newtype](
https://doc.rust-lang.org/rust-by-example/generics/new_types.html)
pattern, which is why we have a dedicated derive for
[`Deref`](https://doc.rust-lang.org/std/ops/trait.Deref.html) and
[`DerefMut`](https://doc.rust-lang.org/std/ops/trait.DerefMut.html).
This derive works for any struct with a single field:
```rust
#[derive(Component, Deref, DerefMut)]
struct MyNewtype(usize);
```
One reason for the single-field limitation is to prevent confusion and
footguns related that would arise from allowing multi-field structs:
<table align="center">
<tr>
<th colspan="2">
Similar structs, different derefs
</th>
</tr>
<tr>
<td>
```rust
#[derive(Deref, DerefMut)]
struct MyStruct {
foo: usize, // <- Derefs usize
bar: String,
}
```
</td>
<td>
```rust
#[derive(Deref, DerefMut)]
struct MyStruct {
bar: String, // <- Derefs String
foo: usize,
}
```
</td>
</tr>
<tr>
<th colspan="2">
Why `.1`?
</th>
</tr>
<tr>
<td colspan="2">
```rust
#[derive(Deref, DerefMut)]
struct MyStruct(Vec<usize>, Vec<f32>);
let mut foo = MyStruct(vec![123], vec![1.23]);
// Why can we skip the `.0` here?
foo.push(456);
// But not here?
foo.1.push(4.56);
```
</td>
</tr>
</table>
However, there are certainly cases where it's useful to allow for
structs with multiple fields. Such as for structs with one "real" field
and one `PhantomData` to allow for generics:
```rust
#[derive(Deref, DerefMut)]
struct MyStruct<T>(
// We want use this field for the `Deref`/`DerefMut` impls
String,
// But we need this field so that we can make this struct generic
PhantomData<T>
);
// ERROR: Deref can only be derived for structs with a single field
// ERROR: DerefMut can only be derived for structs with a single field
```
Additionally, the possible confusion and footguns are mainly an issue
for newer Rust/Bevy users. Those familiar with `Deref` and `DerefMut`
understand what adding the derive really means and can anticipate its
behavior.
## Solution
Allow users to opt into multi-field `Deref`/`DerefMut` derives using a
`#[deref]` attribute:
```rust
#[derive(Deref, DerefMut)]
struct MyStruct<T>(
// Use this field for the `Deref`/`DerefMut` impls
#[deref] String,
// We can freely include any other field without a compile error
PhantomData<T>
);
```
This prevents the footgun pointed out in the first issue described in
the previous section, but it still leaves the possible confusion
surrounding `.0`-vs-`.#`. However, the idea is that by making this
behavior explicit with an attribute, users will be more aware of it and
can adapt appropriately.
---
## Changelog
- Added `#[deref]` attribute to `Deref` and `DerefMut` derives
# Objective
The unit test `chang_tick_wraparound` is meant to ensure that change
ticks correctly deal with wrapping by setting the world's
`last_change_tick` to `u32::MAX`. However, since systems don't use* the
value of `World::last_change_tick`, this test doesn't actually involve
any wrapping behavior.
*exclusive systems do use `World::last_change_tick`; however it gets
overwritten by the system's own last tick in `System::run`.
## Solution
Use `QueryState` instead of systems in the unit test. This approach
actually uses `World::last_change_tick`, so it properly tests that
change ticks deal with wrapping correctly.
# Objective
- Simplify API and make authoring styles easier
See:
https://github.com/bevyengine/bevy/issues/8540#issuecomment-1536177102
## Solution
- The `size`, `min_size`, `max_size`, and `gap` properties have been
replaced by `width`, `height`, `min_width`, `min_height`, `max_width`,
`max_height`, `row_gap`, and `column_gap` properties
---
## Changelog
- Flattened `Style` properties that have a `Size` value directly into
`Style`
## Migration Guide
- The `size`, `min_size`, `max_size`, and `gap` properties have been
replaced by the `width`, `height`, `min_width`, `min_height`,
`max_width`, `max_height`, `row_gap`, and `column_gap` properties. Use
the new properties instead.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
# Objective
- Fix#5631
## Solution
- Wait 50ms (configurable) after the last modification event before
reloading an asset.
---
## Changelog
- `AssetPlugin::watch_for_changes` is now a `ChangeWatcher` instead of a
`bool`
- Fixed https://github.com/bevyengine/bevy/issues/5631
## Migration Guide
- Replace `AssetPlugin::watch_for_changes: true` with e.g.
`ChangeWatcher::with_delay(Duration::from_millis(200))`
---------
Co-authored-by: François <mockersf@gmail.com>
