# Objective
The multi-threaded executor currently runs in a dedicated task on a
single thread. When a system finishes running, it needs to notify that
task and wait for the thread to be available and running before the
executor can process the completion.
See #8304
## Solution
Run the multi-threaded executor at the end of each system task. This
allows it to run immediately instead of needing to wait for the main
thread to wake up. Move the mutable executor state into a separate
struct and wrap it in a mutex so it can be shared among the worker
threads.
While this should be faster in theory, I don't actually know how to
measure the performance impact myself.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
Partially address #888. Gilrs is initialized on a separate thread, and
thus conditionally implements `Send`, and all platforms other than Wasm.
This means the `NonSend` resource constraint is likely too conservative.
## Solution
Relax the requirement, and conditionally derive Resource on a wrapper
around it, using `SyncCell` to satisfy the `Sync` requirement on it.
# Objective
- Fixes#12081
## Solution
Passing the `Affine2` as a neatly packed `mat3x2` breaks WebGL with
`drawElementsInstanced: Buffer for uniform block is smaller than
UNIFORM_BLOCK_DATA_SIZE.`
I fixed this by using a `mat3x3` instead.
Alternative solutions that come to mind:
- Pass in a `mat3x2` on non-webgl targets and a `mat3x3` otherwise. I
guess I could use `#ifdef SIXTEEN_BYTE_ALIGNMENT` for this, but it
doesn't seem quite right? This would be more efficient, but decrease
code quality.
- Do something about `UNIFORM_BLOCK_DATA_SIZE`. I don't know how, so I'd
need some guidance here.
@superdump let me know if you'd like me to implement other variants.
Otherwise, I vote for merging this as a quick fix for `main` and then
improving the packing in subsequent PRs :)
## Additional notes
Ideally we should merge this before @JMS55 rebases #10164 so that they
don't have to rebase everything a second time.
# Objective
- Fixes#12068
## Solution
- Split `bevy_render::color::colorspace` across the various space
implementations in `bevy_color` as appropriate.
- Moved `From` implementations involving
`bevy_render::color::LegacyColor` into `bevy_render::color`
## Migration Guide
###
`bevy_render::color::colorspace::SrgbColorSpace::<f32>::linear_to_nonlinear_srgb`
Use `bevy_color::color::gamma_function_inverse`
###
`bevy_render::color::colorspace::SrgbColorSpace::<f32>::nonlinear_to_linear_srgb`
Use `bevy_color::color::gamma_function`
###
`bevy_render::color::colorspace::SrgbColorSpace::<u8>::linear_to_nonlinear_srgb`
Modify the `u8` value to instead be an `f32` (`|x| x as f32 / 255.`),
use `bevy_color::color::gamma_function_inverse`, and back again.
###
`bevy_render::color::colorspace::SrgbColorSpace::<u8>::nonlinear_to_linear_srgb`
Modify the `u8` value to instead be an `f32` (`|x| x as f32 / 255.`),
use `bevy_color::color::gamma_function`, and back again.
###
`bevy_render::color::colorspace::HslRepresentation::hsl_to_nonlinear_srgb`
Use `Hsla`'s implementation of `Into<Srgba>`
###
`bevy_render::color::colorspace::HslRepresentation::nonlinear_srgb_to_hsl`
Use `Srgba`'s implementation of `Into<Hsla>`
###
`bevy_render::color::colorspace::LchRepresentation::lch_to_nonlinear_srgb`
Use `Lcha`'s implementation of `Into<Srgba>`
###
`bevy_render::color::colorspace::LchRepresentation::nonlinear_srgb_to_lch`
Use `Srgba`'s implementation of `Into<Lcha>`
# Objective
- The bloom effect is currently somewhat costly (in terms of GPU time
used), due to using fragment shaders for down- and upscaling (compute
shaders generally perform better for such tasks).
- Additionally, one might have a `BloomSettings` on a camera whose
`intensity` is only occasionally set to a non-zero value (eg. in outside
areas or areas with bright lighting). Currently, the cost of the bloom
shader is always incurred as long as the `BloomSettings` exists.
## Solution
- Bail out of the bloom render node when `intensity == 0.0`, making the
effect free as long as it is turned all the way down.
# Objective
- Fixes#751
## Solution
- Added `PluginGroupBuilder::add_group`, which accepts an owned `impl
PluginGroup` and adds those plugins to self, following
`PluginGroupBuilder::add`'s replacement rules.
- Split `PluginGroupBuilder::upsert_plugin_state` into two functions,
one of the same name, and
`PluginGroupBuilder::upsert_plugin_entry_state` which takes a
`PluginEntry` and `TypeId` directly. This allows for shared behaviour
between `add` and `add_group`.
- Added 2 unit tests documenting the replacement behaviour in
`PluginGroupBuilder::add_group`.
Co-authored-by: François <mockersf@gmail.com>
# Objective
- A tiny nit I noticed; I think the type of these function is
`EntityCommand`, not `Command`
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
- The 3D Lighting example is meant to show using multiple lights in the
same scene.
- It currently looks very dark. (See [this
image](4fdb1455d5 (r1494653511)).)
- Resetting the physical camera properties sets the shutter speed to 1 /
125, even though it initially starts at 1 / 100.
## Solution
- Increase the intensity of all 3 lights in the example.
- Now it is much closer to the example in Bevy 0.12.
- I had to remove the comment explaining the lightbulb equivalent of the
intensities because I don't know how it was calculated. Does anyone know
what light emits 100,000 lumens?
- Set the initial shutter speed to 1 / 125.
## Showcase
Before:
<img width="1392" alt="before"
src="https://github.com/bevyengine/bevy/assets/59022059/ac353e02-58e9-4661-aa6d-e5fdf0dcd2f6">
After:
<img width="1392" alt="after"
src="https://github.com/bevyengine/bevy/assets/59022059/4ff0beb6-0ced-4fb2-a953-04be2c77f437">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
#7348 added `bevy_utils::Parallel` and replaced the usage of the
`ThreadLocal<Cell<Vec<...>>>` in `check_visibility`, but we were also
using it in `extract_meshes`.
## Solution
Refactor the system to use `Parallel` instead.
# Objective
The physical width and height (pixels) of an image is always integers,
but for `GpuImage` bevy currently stores them as `Vec2` (`f32`).
Switching to `UVec2` makes this more consistent with the [underlying
texture data](https://docs.rs/wgpu/latest/wgpu/struct.Extent3d.html).
I'm not sure if this is worth the change in the surface level API. If
not, feel free to close this PR.
## Solution
- Replace uses of `Vec2` with `UVec2` when referring to texture
dimensions.
- Use integer types for the texture atlas dimensions and sections.
[`Sprite::rect`](a81a2d1da3/crates/bevy_sprite/src/sprite.rs (L29))
remains unchanged, so manually specifying a sub-pixel region of an image
is still possible.
---
## Changelog
- `GpuImage` now stores its size as `UVec2` instead of `Vec2`.
- Texture atlases store their size and sections as `UVec2` and `URect`
respectively.
- `UiImageSize` stores its size as `UVec2`.
## Migration Guide
- Change floating point types (`Vec2`, `Rect`) to their respective
unsigned integer versions (`UVec2`, `URect`) when using `GpuImage`,
`TextureAtlasLayout`, `TextureAtlasBuilder`,
`DynamicAtlasTextureBuilder` or `FontAtlas`.
# Objective
- I hit an issue using the `file_watcher` feature to hot reload assets
for my game. The change in this PR allows me to now hot reload assets.
- The issue stemmed from my project being a multi crate workspace
project structured like so:
```
└── my_game
├── my_game_core
│ ├── src
│ └── assets
├── my_game_editor
│ └── src/main.rs
└── my_game
└── src/main.rs
```
- `my_game_core` is a crate that holds all my game logic and assets
- `my_game` is the crate that creates the binary for my game (depends on
the game logic and assets in `my_game_core`)
- `my_game_editor` is an editor tool for my game (it also depends on the
game logic and assets in `my_game_core`)
Whilst running `my_game` and `my_game_editor` from cargo during
development I would use `AssetPlugin` like so:
```rust
default_plugins.set(AssetPlugin {
watch_for_changes_override: Some(true),
file_path: "../my_game_core/assets".to_string(),
..Default::default()
})
```
This works fine; bevy picks up the assets. However on saving an asset I
would get the following panic from `file_watcher`. It wouldn't kill the
app, but I wouldn't see the asset hot reload:
```
thread 'notify-rs debouncer loop' panicked at /Users/ian/.cargo/registry/src/index.crates.io-6f17d22bba15001f/bevy_asset-0.12.1/src/io/file/file_watcher.rs:48:58:
called `Result::unwrap()` on an `Err` value: StripPrefixError(())
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
## Solution
- The solution is to collapse dot segments in the root asset path
`FileWatcher` is using
- There was already bevy code to do this in `AssetPath`, so I extracted
that code so it could be reused in `FileWatcher`
# Objective
- Simplify `Srgba` hex string parsing using std hex parsing functions
and removing loops in favor of bitwise ops.
This is a follow-up of the `bevy_color` upstream PR review:
https://github.com/bevyengine/bevy/pull/12013#discussion_r1497408114
## Solution
- Reworked `Srgba::hex` to use `from_str_radix` and some bitwise ops;
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- Sometimes, it is useful to get a `Handle<T>` from an `AssetId<T>`. For
example, when iterating `Assets` to find a specific asset. So much so
that it's possible to do so with `AssetServer::get_id_handle`
- However, `AssetServer::get_id_handle` doesn't work with assets
directly added to `Assets` using `Assets::add`.
- Fixes#12087
## Solution
- Add `Assets::get_strong_handle` to convert an `AssetId` into an
`Handle`
- Document `AssetServer::get_id_handle` to explain its limitation and
point to `get_strong_handle`.
- Add a test for `get_strong_handle`
- Add a `duplicate_handles` field to `Assets` to avoid dropping assets
with a live handle generated by `get_strong_handle` (more reference
counting yay…)
- Fix typos in `Assets` docs
---
## Changelog
- Add `Assets::get_strong_handle` to convert an `AssetId` into an
`Handle`
# Objective
- Add the new `-Zcheck-cfg` checks to catch more warnings
- Fixes#12091
## Solution
- Create a new `cfg-check` to the CI that runs `cargo check -Zcheck-cfg
--workspace` using cargo nightly (and fails if there are warnings)
- Fix all warnings generated by the new check
---
## Changelog
- Remove all redundant imports
- Fix cfg wasm32 targets
- Add 3 dead code exceptions (should StandardColor be unused?)
- Convert ios_simulator to a feature (I'm not sure if this is the right
way to do it, but the check complained before)
## Migration Guide
No breaking changes
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Make `GizmoConfigStore` play well with reflection-based workflows like
editors.
## Solution
- `#[derive(Reflect)]` and call `.register_type()`.
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Add XYZ colour space. This will be most useful as a conversion step when
working with other (more common) colour spaces. See
[Wikipedia](https://en.wikipedia.org/wiki/CIE_1931_color_space) for
details on this space.
## Solution
- Added `Xyza` to `Color` and as its own type.
---
## Changelog
- Added `Xyza` type.
- Added `Color::Xyza` variant.
## Migration Guide
- `Color` enum now has an additional member, `Xyza`. Convert it to any
other type to handle this case in match statements.
# Objective
- Fix a wrongly named type
## Solution
- Rename it properly
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Fixes#11821.
## Solution
* Run `System::apply_deferred` in `System::run` after executing the
system.
* Switch to using `System::run_unsafe` in `SingleThreadedExecutor` to
preserve the current behavior.
* Remove the `System::apply_deferred` in `SimpleExecutor` as it's now
redundant.
* Remove the `System::apply_deferred` when running one-shot systems, as
it's now redundant.
---
## Changelog
Changed: `System::run` will now immediately apply deferred system params
after running the system.
## Migration Guide
`System::run` will now always run `System::apply_deferred` immediately
after running the system now. If you were running systems and then
applying their deferred buffers at a later point in time, you can
eliminate the latter.
```rust
// in 0.13
system.run(world);
// .. sometime later ...
system.apply_deferred(world);
// in 0.14
system.run(world);
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Since #9822, `SimpleExecutor` panics when an automatic sync point is
inserted:
```rust
let mut sched = Schedule::default();
sched.set_executor_kind(ExecutorKind::Simple);
sched.add_systems((|_: Commands| (), || ()).chain());
sched.run(&mut World::new());
```
```
System's param_state was not found. Did you forget to initialize this system before running it?
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic in system `bevy_ecs::schedule::executor::apply_deferred`!
```
## Solution
Don't try to run the `apply_deferred` system.
# Objective
Fixes Skyboxes on WebGL, which broke in Bevy 0.13 due to the addition of
the `brightness` uniform, when previously the skybox pipeline only had
view and global uniforms.
```ignore
panicked at ~/.cargo/registry/src/index.crates.io-6f17d22bba15001f/wgpu-0.19.1/src/backend/wgpu_core.rs:3009:5:
wgpu error: Validation Error
Caused by:
In Device::create_render_pipeline
note: label = `skybox_pipeline`
In the provided shader, the type given for group 0 binding 3 has a size of 4. As the device does not support `DownlevelFlags::BUFFER_BINDINGS_NOT_16_BYTE_ALIGNED`, the type must have a size that is a multiple of 16 bytes.
```
It would be nice if this could be backported to a 0.13.1 patch as well
if possible. I'm needing to rely on my own fork for now.
## Solution
Similar to the Globals uniform solution here:
d31de3f139/crates/bevy_render/src/globals.rs (L59-L60)
I've added 3 conditional fields to `SkyboxUniforms`.
# Objective
- Example reflection_probe is not frame rate independent
## Solution
- Use time delta to rotate the camera, use the same rotation speed as
the load_gltf example
31d7fcd9cb/examples/3d/load_gltf.rs (L63)
---
# Objective
`Scope::spawn`, `Scope::spawn_on_external`, and `Scope::spawn_on_scope`
have different signatures depending on whether the `multi-threaded`
feature is enabled. The single-threaded version has a stricter signature
that prevents sending the `Scope` itself to spawned tasks.
## Solution
Changed the lifetime constraints in the single-threaded signatures from
`'env` to `'scope` to match the multi-threaded version.
This was split off from #11906.
# Objective
- Assist Bevy contributors in the creation of `bevy_color` spaces by
ensuring consistent API implementation.
## Solution
Created a `pub(crate)` trait `StandardColor` which has all the
requirements for a typical color space (e.g, `Srgba`, `Color`, etc.).
---
## Changelog
- Implemented traits missing from certain color spaces.
## Migration Guide
_No migration required_
# Objective
Improve code quality and prevent bugs.
## Solution
I removed the unnecessary wildcards from `<LogPlugin as Plugin>::build`.
I also changed the warnings that would occur if the subscriber/logger
was already set into errors.
# Objective
This provides a new set of color types and operations for Bevy.
Fixes: #10986#1402
## Solution
The new crate provides a set of distinct types for various useful color
spaces, along with utilities for manipulating and converting colors.
This is not a breaking change, as no Bevy APIs are modified (yet).
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
When dealing with custom asset sources it can be a bit tricky to get
asset roots combined with relative paths correct.
It's even harder when it isn't mentioned which path was problematic.
## Solution
Mention which path failed for the file watcher.
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- Fixes#11977 - user defined shaders don't work in wasm
- After investigation, it won't work if the shader is not yet available
when compiling the pipeline on all platforms, for example if you load
many assets
## Solution
- Set the pipeline state to queued when it errs waiting for the shader
so that it's retried
# Objective
- Some properties of public types are private but sometimes it's useful
to be able to set those
## Solution
- Make more stuff pub
---
## Changelog
- `MaterialBindGroupId` internal id is now pub and added a new()
constructor
- `ExtractedPointLight` and `ExtractedDirectionalLight` properties are
now all pub
---------
Co-authored-by: James Liu <contact@jamessliu.com>
This PR closes#11978
# Objective
Fix rendering on iOS Simulators.
iOS Simulator doesn't support the capability CUBE_ARRAY_TEXTURES, since
0.13 this started to make iOS Simulator not render anything with the
following message being outputted:
```
2024-02-19T14:59:34.896266Z ERROR bevy_render::render_resource::pipeline_cache: failed to create shader module: Validation Error
Caused by:
In Device::create_shader_module
Shader validation error:
Type [40] '' is invalid
Capability Capabilities(CUBE_ARRAY_TEXTURES) is required
```
## Solution
- Split up NO_ARRAY_TEXTURES_SUPPORT into both NO_ARRAY_TEXTURES_SUPPORT
and NO_CUBE_ARRAY_TEXTURES_SUPPORT and correctly apply
NO_ARRAY_TEXTURES_SUPPORT for iOS Simulator using the cfg flag
introduced in #10178.
---
## Changelog
### Fixed
- Rendering on iOS Simulator due to missing CUBE_ARRAY_TEXTURES support.
---------
Co-authored-by: Sam Pettersson <sam.pettersson@geoguessr.com>
# Objective
- Taplo in CI is not running. The link used to download taplo doesn't
work anymore.
## Solution
- Compile taplo directly with cargo
- Improve docs a little
- Run taplo
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- The `touch_screen_input_system` system runs on every tick.
- It unconditionally calls `update(&mut self)`, on the `Touches`
resource.
- This blocks the usage of a `resource_changed::<Touches>` run
condition.
## Solution
- Remove `update(&mut self)` as it's only used in this one system, and
in-lining the method implementation removes an indirection to an
ambiguously named method.
- Add conditional checks around the calls to clearing the internal maps.
---------
Signed-off-by: Jean Mertz <git@jeanmertz.com>
# Objective
- Some members of `bevy_dynamic_plugin` are not documented.
- Part of #3492.
## Solution
- Add documentation to members missing it in `bevy_dynamic_plugin`.
- Update existing documentation for clarity and formatting.
---
## Changelog
- Completely document `bevy_dynamic_plugin`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Part of #11590
- Fix `unsafe_op_in_unsafe_fn` for trivial cases in bevy_ecs
## Solution
Fix `unsafe_op_in_unsafe_fn` in bevy_ecs for trivial cases, i.e., add an
`unsafe` block when the safety comment already exists or add a comment
like "The invariants are uphold by the caller".
---------
Co-authored-by: James Liu <contact@jamessliu.com>
## Objective
Always have `some_system.into_system().type_id() ==
some_system.into_system_set().system_type().unwrap()`.
System sets have a `fn system_type() -> Option<TypeId>` that is
implemented by `SystemTypeSet` to returning the TypeId of the system's
function type. This was implemented in
https://github.com/bevyengine/bevy/pull/7715 and is used in
`bevy_mod_debugdump` to handle `.after(function)` constraints.
Back then, `System::type_id` always also returned the type id of the
function item, not of `FunctionSystem<M, F>`.
https://github.com/bevyengine/bevy/pull/11728 changes the behaviour of
`System::type_id` so that it returns the id of the
`FunctionSystem`/`ExclusiveFunctionSystem` wrapper, but it did not
change `SystemTypeSet::system_type`, so doing the lookup breaks in
`bevy_mod_debugdump`.
## Solution
Change `IntoSystemSet` for functions to return a
`SystemTypeSet<FunctionSystem>` /
`SystemTypeSet<ExclusiveFunctionSystem>` instead of `SystemTypeSet<F>`.
# Objective
- Globals are supposed to be available in vertex shader but that was
mistakenly removed in 0.13
## Solution
- Configure the visibility of the globals correctly
Fixes https://github.com/bevyengine/bevy/issues/12015
# Objective
- The file asset source currently creates the `imported_assets/Default`
directory with relative path, which leads to wrongly created directories
when the executable is run with a working directory different from the
project root.
## Solution
- Use the full path instead.
# Objective
This PR adds some missing mime types to the
`ImageFormat::from_mime_type` method. As discussed [in this comment on
the Discord Bevy
community](https://discord.com/channels/691052431525675048/691052431974465548/1209904290227949729):
> It's strange that Bevy supports parsing `ImageFormat::WebP` from a
.webp str extension in the method below, but not from the mime type.
>
> In comparison, the image crate does parse it:
https://github.com/image-rs/image/blob/master/src/image.rs#L170
# Solution
For each of the missing mime types, I added them based on the
`ImageFormat::from_mime_type` of the image crate:
https://github.com/image-rs/image/blob/master/src/image.rs#L209, except
for `ImageFormat::Basis` and `ImageFormat::Ktx2` which are not present
in the image crate, and I ignore if they have a mime type or not*
\* apparently nowadays there is an official mime type: `image/ktx2`
https://www.iana.org/assignments/media-types/image/ktx2
Any feedback is welcome! I thought of refactoring a bit more and
delegating the mime type parsing to the image crate (and possibly the
same for extensions), let me know if that's desired 🙂
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Move Gizmo examples into the separate directory
Fixes#11899
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Closes#11985
## Solution
- alpha.rs has been moved from bevy_pbr into bevy_render; bevy_pbr and
bevy_gltf now access `AlphaMode` through bevy_render.
---
## Migration Guide
In the present implementation, external consumers of `AlphaMode` will
have to access it through bevy_render rather than through bevy_pbr,
changing their import from `bevy_pbr::AlphaMode` to
`bevy_render::alpha::AlphaMode` (or the corresponding glob import from
`bevy_pbr::prelude::*` to `bevy_render::prelude::*`).
## Uncertainties
Some remaining things from this that I am uncertain about:
- Here, the `app.register_type<AlphaMode>()` call has been moved from
`PbrPlugin` to `RenderPlugin`; I'm not sure if this is quite right, and
I was unable to find any direct relationship between `PbrPlugin` and
`RenderPlugin`.
- `AlphaMode` was placed in the prelude of bevy_render. I'm not certain
that this is actually appropriate.
- bevy_pbr does not re-export `AlphaMode`, which makes this a breaking
change for external consumers.
Any of these things could be easily changed; I'm just not confident that
I necessarily adopted the right approach in these (known) ways since
this codebase and ecosystem is quite new to me.
Adopted #8266, so copy-pasting the description from there:
# Objective
Support the KHR_texture_transform extension for the glTF loader.
- Fixes#6335
- Fixes#11869
- Implements part of #11350
- Implements the GLTF part of #399
## Solution
As is, this only supports a single transform. Looking at Godot's source,
they support one transform with an optional second one for detail, AO,
and emission. glTF specifies one per texture. The public domain
materials I looked at seem to share the same transform. So maybe having
just one is acceptable for now. I tried to include a warning if multiple
different transforms exist for the same material.
Note the gltf crate doesn't expose the texture transform for the normal
and occlusion textures, which it should, so I just ignored those for
now. (note by @janhohenheim: this is still the case)
Via `cargo run --release --example scene_viewer
~/src/clone/glTF-Sample-Models/2.0/TextureTransformTest/glTF/TextureTransformTest.gltf`:
## Changelog
Support for the
[KHR_texture_transform](https://github.com/KhronosGroup/glTF/tree/main/extensions/2.0/Khronos/KHR_texture_transform)
extension added. Texture UVs that were scaled, rotated, or offset in a
GLTF are now properly handled.
---------
Co-authored-by: Al McElrath <hello@yrns.org>
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
