491 commits

Author	SHA1	Message	Date
Pascal Hertleif	0c2c52a0cd	Derive Error for more error types (#10240) ... # Objective Align all error-like types to implement `Error`. Fixes #10176 ## Solution - Derive `Error` on more types - Refactor instances of manual implementations that could be derived This adds thiserror as a dependency to bevy_transform, which might increase compilation time -- but I don't know of any situation where you might only use that but not any other crate that pulls in bevy_utils. The `contributors` example has a `LoadContributorsError` type, but as it's an example I have not updated it. Doing that would mean either having a `use bevy_internal::utils::thiserror::Error;` in an example file, or adding `thiserror` as a dev-dependency to the main `bevy` crate. --- ## Changelog - All `…Error` types now implement the `Error` trait	2023-10-28 22:20:37 +00:00
ickshonpe	6d7808da74	Implement Display for Val (#10296) ... # Objective Implement `Display` for `Val` --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2023-10-28 19:03:18 +00:00
ickshonpe	3eaad948a7	Implement Neg for Val (#10295) ... # Objective Implement `Neg` for `Val`	2023-10-28 16:04:04 +00:00
Rob Parrett	befbf52a18	Fix crash with certain right-aligned text (#10271) ... # Objective Fixes #9395 Alternative to #9415 (See discussion here) ## Solution Do clamping like [`fit-content`](https://www.w3.org/TR/css-sizing-3/#column-sizing). ## Notes I am not sure if this is a valid approach. It doesn't seem to cause any obvious issues with our existing examples.	2023-10-26 22:09:34 +00:00
st0rmbtw	afe8b5f20d	Replace all usages of texture_descritor.size.* with the helper methods (#10227) ... # Objective A follow-up PR for https://github.com/bevyengine/bevy/pull/10221 ## Changelog Replaced usages of texture_descriptor.size with the helper methods of `Image` through the entire engine codebase	2023-10-23 20:49:02 +00:00
Rob Parrett	38e0a8010e	Tidy up UI node docs (#10189) ... # Objective While reviewing #10187 I noticed some other mistakes in the UI node docs. ## Solution I did a quick proofreading pass and fixed a few things. And of course, the typo from that other PR. ## Notes I occasionally insert a period to make a section of doc self-consistent but didn't go one way or the other on all periods in the file. --------- Co-authored-by: Noah <noahshomette@gmail.com>	2023-10-21 17:38:15 +00:00
robtfm	6f2a5cb862	Bind group entries (#9694) ... # Objective Simplify bind group creation code. alternative to (and based on) #9476 ## Solution - Add a `BindGroupEntries` struct that can transparently be used where `&[BindGroupEntry<'b>]` is required in BindGroupDescriptors. Allows constructing the descriptor's entries as: ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &BindGroupEntries::with_indexes(( (2, &my_sampler), (3, my_uniform), )), ); ``` instead of ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &[ BindGroupEntry { binding: 2, resource: BindingResource::Sampler(&my_sampler), }, BindGroupEntry { binding: 3, resource: my_uniform, }, ], ); ``` or ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &BindGroupEntries::sequential((&my_sampler, my_uniform)), ); ``` instead of ```rust render_device.create_bind_group( "my_bind_group", &my_layout, &[ BindGroupEntry { binding: 0, resource: BindingResource::Sampler(&my_sampler), }, BindGroupEntry { binding: 1, resource: my_uniform, }, ], ); ``` the structs has no user facing macros, is tuple-type-based so stack allocated, and has no noticeable impact on compile time. - Also adds a `DynamicBindGroupEntries` struct with a similar api that uses a `Vec` under the hood and allows extending the entries. - Modifies `RenderDevice::create_bind_group` to take separate arguments `label`, `layout` and `entries` instead of a `BindGroupDescriptor` struct. The struct can't be stored due to the internal references, and with only 3 members arguably does not add enough context to justify itself. - Modify the codebase to use the new api and the `BindGroupEntries` / `DynamicBindGroupEntries` structs where appropriate (whenever the entries slice contains more than 1 member). ## Migration Guide - Calls to `RenderDevice::create_bind_group({BindGroupDescriptor { label, layout, entries })` must be amended to `RenderDevice::create_bind_group(label, layout, entries)`. - If `label`s have been specified as `"bind_group_name".into()`, they need to change to just `"bind_group_name"`. `Some("bind_group_name")` and `None` will still work, but `Some("bind_group_name")` can optionally be simplified to just `"bind_group_name"`. --------- Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>	2023-10-21 15:39:22 +00:00
robtfm	61bad4eb57	update shader imports (#10180) ... # Objective - bump naga_oil to 0.10 - update shader imports to use rusty syntax ## Migration Guide naga_oil 0.10 reworks the import mechanism to support more syntax to make it more rusty, and test for item use before importing to determine which imports are modules and which are items, which allows: - use rust-style imports ``` #import bevy_pbr::{ pbr_functions::{alpha_discard as discard, apply_pbr_lighting}, mesh_bindings, } ``` - import partial paths: ``` #import part::of::path ... path::remainder::function(); ``` which will call to `part::of::path::remainder::function` - use fully qualified paths without importing: ``` // #import bevy_pbr::pbr_functions bevy_pbr::pbr_functions::pbr() ``` - use imported items without qualifying ``` #import bevy_pbr::pbr_functions::pbr // for backwards compatibility the old style is still supported: // #import bevy_pbr::pbr_functions pbr ... pbr() ``` - allows most imported items to end with `_` and numbers (naga_oil#30). still doesn't allow struct members to end with `_` or numbers but it's progress. - the vast majority of existing shader code will work without changes, but will emit "deprecated" warnings for old-style imports. these can be suppressed with the `allow-deprecated` feature. - partly breaks overrides (as far as i'm aware nobody uses these yet) - now overrides will only be applied if the overriding module is added as an additional import in the arguments to `Composer::make_naga_module` or `Composer::add_composable_module`. this is necessary to support determining whether imports are modules or items.	2023-10-21 11:51:58 +00:00
Rob Parrett	26ecfcff43	Fix UI borders (#10078) ... # Objective Fixes #10069 ## Solution Extracted UI nodes were previously stored in a `SparseSet` and had a predictable iteration order. UI borders and outlines relied on this. Now they are stored in a HashMap and that is no longer true. This adds `entity.index()` to the sort key for `TransparentUi` so that the iteration order is predictable and the "border entities" that get spawned during extraction are guaranteed to get drawn after their respective container nodes again. I **think** that everything still works for overlapping ui nodes etc, because the z value / primary sort is still controlled by the "ui stack." Text above is just my current understanding. A rendering expert should check this out. I will do some more testing when I can.	2023-10-13 17:17:16 +00:00
pablo-lua	ca873e767f	Implement serialize and deserialize for some UI types (#10044) ... # Objective - Add serde Deserialize and Serialize for structs that doesn't implement it, even if they could benefit from it ## Solution - Derive these traits for the structs Style, BackgroundColor, BorderColor and Outline. ---	2023-10-10 18:52:48 +00:00
ickshonpe	2e887b856f	UI node outlines (#9931) ... # Objective Add support for drawing outlines outside the borders of UI nodes. ## Solution Add a new `Outline` component with `width`, `offset` and `color` fields. Added `outline_width` and `outline_offset` fields to `Node`. This is set after layout recomputation by the `resolve_outlines_system`. Properties of outlines: * Unlike borders, outlines have to be the same width on each edge. * Outlines do not occupy any space in the layout. * The `Outline` component won't be added to any of the UI node bundles, it needs to be inserted separately. * Outlines are drawn outside the node's border, so they are clipped using the clipping rect of their entity's parent UI node (if it exists). * `Val::Percent` outline widths are resolved based on the width of the outlined UI node. * The offset of the `Outline` adds space between an outline and the edge of its node. I was leaning towards adding an `outline` field to `Style` but a separate component seems more efficient for queries and change detection. The `Outline` component isn't added to bundles for the same reason. --- ## Examples * This image is from the `borders` example from the Bevy UI examples but modified to include outlines. The UI nodes are the dark red rectangles, the bright red rectangles are borders and the white lines offset from each node are the outlines. The yellow rectangles are separate nodes contained with the dark red nodes: <img width="406" alt="outlines" src="https://github.com/bevyengine/bevy/assets/27962798/4e6f315a-019f-42a4-94ee-cca8e684d64a"> * This is from the same example but using a branch that implements border-radius. Here the the outlines are in orange and there is no offset applied. I broke the borders implementation somehow during the merge, which is why some of the borders from the first screenshot are missing 😅. The outlines work nicely though (as long as you can forgive the lack of anti-aliasing):  --- ## Notes As I explained above, I don't think the `Outline` component should be added to UI node bundles. We can have helper functions though, perhaps something as simple as: ```rust impl NodeBundle { pub fn with_outline(self, outline: Outline) -> (Self, Outline) { (self, outline) } } ``` I didn't include anything like this as I wanted to keep the PR's scope as narrow as possible. Maybe `with_outline` should be in a trait that we implement for each UI node bundle. --- ## Changelog Added support for outlines to Bevy UI. * The `Outline` component adds an outline to a UI node. * The `outline_width` field added to `Node` holds the resolved width of the outline, which is set by the `resolve_outlines_system` after layout recomputation. * Outlines are drawn by the system `extract_uinode_outlines`.	2023-10-05 12:10:32 +00:00
Nolan Darilek	73e0ac26ca	Various accessibility API updates. (#9989) ... # Objective `bevy_a11y` was impossible to integrate into some third-party projects in part because it insisted on managing the accessibility tree on its own. ## Solution The changes in this PR were necessary to get `bevy_egui` working with Bevy's AccessKit integration. They were tested on a fork of 0.11, developed against `bevy_egui`, then ported to main and tested against the `ui` example. ## Changelog ### Changed * Add `bevy_a11y::ManageAccessibilityUpdates` to indicate whether the ECS should manage accessibility tree updates. * Add getter/setter to `bevy_a11y::AccessibilityRequested`. * Add `bevy_a11y::AccessibilitySystem` `SystemSet` for ordering relative to accessibility tree updates. * Upgrade `accesskit` to v0.12.0. ### Fixed * Correctly set initial accessibility focus to new windows on creation. ## Migration Guide ### Change direct accesses of `AccessibilityRequested` to use `AccessibilityRequested.::get()`/`AccessibilityRequested::set()` #### Before ``` use std::sync::atomic::Ordering; // To access accessibility_requested.load(Ordering::SeqCst) // To update accessibility_requested.store(true, Ordering::SeqCst); ``` #### After ``` // To access accessibility_requested.get() // To update accessibility_requested.set(true); ``` --------- Co-authored-by: StaffEngineer <111751109+StaffEngineer@users.noreply.github.com>	2023-10-02 21:22:52 +00:00
SADIK KUZU	483f2464a8	Fix typos (#9965) ... # Objective - There were a few typos in the project. - This PR fixes these typos. ## Solution - Fixing the typos. Signed-off-by: SADIK KUZU <sadikkuzu@hotmail.com>	2023-09-29 12:26:41 +00:00
ickshonpe	edba496697	Store both the rounded and unrounded node size in Node (#9923) ... # Objective Text bounds are computed by the layout algorithm using the text's measurefunc so that text will only wrap after it's used the maximum amount of available horizontal space. When the layout size is returned the layout coordinates are rounded and this sometimes results in the final size of the Node not matching the size computed with the measurefunc. This means that the text may no longer fit the horizontal available space and instead wrap onto a new line. However, no glyphs will be generated for this new line because no vertical space for the extra line was allocated. fixes #9874 ## Solution Store both the rounded and unrounded node sizes in `Node`. Rounding is used to eliminate pixel-wide gaps between nodes that should be touching edge to edge, but this isn't necessary for text nodes as they don't have solid edges. ## Changelog * Added the `rounded_size: Vec2` field to `Node`. * `text_system` uses the unrounded node size when computing a text layout. --------- Co-authored-by: Rob Parrett <robparrett@gmail.com>	2023-09-28 22:42:13 +00:00
Robert Swain	b6ead2be95	Use EntityHashMap<Entity, T> for render world entity storage for better performance (#9903) ... # Objective - Improve rendering performance, particularly by avoiding the large system commands costs of using the ECS in the way that the render world does. ## Solution - Define `EntityHasher` that calculates a hash from the `Entity.to_bits()` by `i | (i.wrapping_mul(0x517cc1b727220a95) << 32)`. `0x517cc1b727220a95` is something like `u64::MAX / N` for N that gives a value close to π and that works well for hashing. Thanks for @SkiFire13 for the suggestion and to @nicopap for alternative suggestions and discussion. This approach comes from `rustc-hash` (a.k.a. `FxHasher`) with some tweaks for the case of hashing an `Entity`. `FxHasher` and `SeaHasher` were also tested but were significantly slower. - Define `EntityHashMap` type that uses the `EntityHashser` - Use `EntityHashMap<Entity, T>` for render world entity storage, including: - `RenderMaterialInstances` - contains the `AssetId<M>` of the material associated with the entity. Also for 2D. - `RenderMeshInstances` - contains mesh transforms, flags and properties about mesh entities. Also for 2D. - `SkinIndices` and `MorphIndices` - contains the skin and morph index for an entity, respectively - `ExtractedSprites` - `ExtractedUiNodes` ## Benchmarks All benchmarks have been conducted on an M1 Max connected to AC power. The tests are run for 1500 frames. The 1000th frame is captured for comparison to check for visual regressions. There were none. ### 2D Meshes `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d` #### `--ordered-z` This test spawns the 2D meshes with z incrementing back to front, which is the ideal arrangement allocation order as it matches the sorted render order which means lookups have a high cache hit rate. <img width="1112" alt="Screenshot 2023-09-27 at 07 50 45" src="https://github.com/bevyengine/bevy/assets/302146/e140bc98-7091-4a3b-8ae1-ab75d16d2ccb"> -39.1% median frame time. #### Random This test spawns the 2D meshes with random z. This not only makes the batching and transparent 2D pass lookups get a lot of cache misses, it also currently means that the meshes are almost certain to not be batchable. <img width="1108" alt="Screenshot 2023-09-27 at 07 51 28" src="https://github.com/bevyengine/bevy/assets/302146/29c2e813-645a-43ce-982a-55df4bf7d8c4"> -7.2% median frame time. ### 3D Meshes `many_cubes --benchmark` <img width="1112" alt="Screenshot 2023-09-27 at 07 51 57" src="https://github.com/bevyengine/bevy/assets/302146/1a729673-3254-4e2a-9072-55e27c69f0fc"> -7.7% median frame time. ### Sprites **NOTE: On `main` sprites are using `SparseSet<Entity, T>`!** `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite` #### `--ordered-z` This test spawns the sprites with z incrementing back to front, which is the ideal arrangement allocation order as it matches the sorted render order which means lookups have a high cache hit rate. <img width="1116" alt="Screenshot 2023-09-27 at 07 52 31" src="https://github.com/bevyengine/bevy/assets/302146/bc8eab90-e375-4d31-b5cd-f55f6f59ab67"> +13.0% median frame time. #### Random This test spawns the sprites with random z. This makes the batching and transparent 2D pass lookups get a lot of cache misses. <img width="1109" alt="Screenshot 2023-09-27 at 07 53 01" src="https://github.com/bevyengine/bevy/assets/302146/22073f5d-99a7-49b0-9584-d3ac3eac3033"> +0.6% median frame time. ### UI **NOTE: On `main` UI is using `SparseSet<Entity, T>`!** `many_buttons` <img width="1111" alt="Screenshot 2023-09-27 at 07 53 26" src="https://github.com/bevyengine/bevy/assets/302146/66afd56d-cbe4-49e7-8b64-2f28f6043d85"> +15.1% median frame time. ## Alternatives - Cart originally suggested trying out `SparseSet<Entity, T>` and indeed that is slightly faster under ideal conditions. However, `PassHashMap<Entity, T>` has better worst case performance when data is randomly distributed, rather than in sorted render order, and does not have the worst case memory usage that `SparseSet`'s dense `Vec<usize>` that maps from the `Entity` index to sparse index into `Vec<T>`. This dense `Vec` has to be as large as the largest Entity index used with the `SparseSet`. - I also tested `PassHashMap<u32, T>`, intending to use `Entity.index()` as the key, but this proved to sometimes be slower and mostly no different. - The only outstanding approach that has not been implemented and tested is to _not_ clear the render world of its entities each frame. That has its own problems, though they could perhaps be solved. - Performance-wise, if the entities and their component data were not cleared, then they would incur table moves on spawn, and should not thereafter, rather just their component data would be overwritten. Ideally we would have a neat way of either updating data in-place via `&mut T` queries, or inserting components if not present. This would likely be quite cumbersome to have to remember to do everywhere, but perhaps it only needs to be done in the more performance-sensitive systems. - The main problem to solve however is that we want to both maintain a mapping between main world entities and render world entities, be able to run the render app and world in parallel with the main app and world for pipelined rendering, and at the same time be able to spawn entities in the render world in such a way that those Entity ids do not collide with those spawned in the main world. This is potentially quite solvable, but could well be a lot of ECS work to do it in a way that makes sense. --- ## Changelog - Changed: Component data for entities to be drawn are no longer stored on entities in the render world. Instead, data is stored in a `EntityHashMap<Entity, T>` in various resources. This brings significant performance benefits due to the way the render app clears entities every frame. Resources of most interest are `RenderMeshInstances` and `RenderMaterialInstances`, and their 2D counterparts. ## Migration Guide Previously the render app extracted mesh entities and their component data from the main world and stored them as entities and components in the render world. Now they are extracted into essentially `EntityHashMap<Entity, T>` where `T` are structs containing an appropriate group of data. This means that while extract set systems will continue to run extract queries against the main world they will store their data in hash maps. Also, systems in later sets will either need to look up entities in the available resources such as `RenderMeshInstances`, or maintain their own `EntityHashMap<Entity, T>` for their own data. Before: ```rust fn queue_custom( material_meshes: Query<(Entity, &MeshTransforms, &Handle<Mesh>), With<InstanceMaterialData>>, ) { ... for (entity, mesh_transforms, mesh_handle) in &material_meshes { ... } } ``` After: ```rust fn queue_custom( render_mesh_instances: Res<RenderMeshInstances>, instance_entities: Query<Entity, With<InstanceMaterialData>>, ) { ... for entity in &instance_entities { let Some(mesh_instance) = render_mesh_instances.get(&entity) else { continue; }; // The mesh handle in `AssetId<Mesh>` form, and the `MeshTransforms` can now // be found in `mesh_instance` which is a `RenderMeshInstance` ... } } ``` --------- Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>	2023-09-27 08:28:28 +00:00
Hampus	7a507fa0c4	Fix documentation for ui node Style (#9935) ... # Objective The scetion for guides about flexbox has a link to grid and the section for grid has a link to a guide about flexbox. ## Solution Swapped links for flexbox and grid. ---	2023-09-26 22:18:41 +00:00
Rob Parrett	7063c86ed4	Fix some typos (#9934) ... # Objective To celebrate the turning of the seasons, I took a small walk through the codebase guided by the "[code spell checker](https://marketplace.visualstudio.com/items?itemName=streetsidesoftware.code-spell-checker)" VS Code extension and fixed a few typos.	2023-09-26 19:46:24 +00:00
jpsikstus	bc1f33d50b	Add link to Text2dBundle in TextBundle docs. (#9900) ... # Objective Some beginners spend time trying to manually set the position of a `TextBundle`, without realizing that `Text2dBundle` exists. ## Solution Mention `Text2dBundle` in the documentation of `TextBundle`. --------- Co-authored-by: Rob Parrett <robparrett@gmail.com>	2023-09-25 20:33:42 +00:00
Ycy	35de5e608e	register TextLayoutInfo and TextFlags type. (#9919) ... derive `Reflect` to `GlyphAtlasInfo`,`PositionedGlyph` and `TextLayoutInfo`. # Objective - I need reflection gets all components of the `TextBundle` and `clone_value` it ## Solution - registry it	2023-09-25 18:59:29 +00:00
Bruce Mitchener	ae95ba5278	Fix typos. (#9922) ... # Objective - Have docs with fewer typos.1 ## Solution - Fix typos as they are found.	2023-09-25 18:35:46 +00:00
Robert Swain	5c884c5a15	Automatic batching/instancing of draw commands (#9685) ... # Objective - Implement the foundations of automatic batching/instancing of draw commands as the next step from #89 - NOTE: More performance improvements will come when more data is managed and bound in ways that do not require rebinding such as mesh, material, and texture data. ## Solution - The core idea for batching of draw commands is to check whether any of the information that has to be passed when encoding a draw command changes between two things that are being drawn according to the sorted render phase order. These should be things like the pipeline, bind groups and their dynamic offsets, index/vertex buffers, and so on. - The following assumptions have been made: - Only entities with prepared assets (pipelines, materials, meshes) are queued to phases - View bindings are constant across a phase for a given draw function as phases are per-view - `batch_and_prepare_render_phase` is the only system that performs this batching and has sole responsibility for preparing the per-object data. As such the mesh binding and dynamic offsets are assumed to only vary as a result of the `batch_and_prepare_render_phase` system, e.g. due to having to split data across separate uniform bindings within the same buffer due to the maximum uniform buffer binding size. - Implement `GpuArrayBuffer` for `Mesh2dUniform` to store Mesh2dUniform in arrays in GPU buffers rather than each one being at a dynamic offset in a uniform buffer. This is the same optimisation that was made for 3D not long ago. - Change batch size for a range in `PhaseItem`, adding API for getting or mutating the range. This is more flexible than a size as the length of the range can be used in place of the size, but the start and end can be otherwise whatever is needed. - Add an optional mesh bind group dynamic offset to `PhaseItem`. This avoids having to do a massive table move just to insert `GpuArrayBufferIndex` components. ## Benchmarks All tests have been run on an M1 Max on AC power. `bevymark` and `many_cubes` were modified to use 1920x1080 with a scale factor of 1. I run a script that runs a separate Tracy capture process, and then runs the bevy example with `--features bevy_ci_testing,trace_tracy` and `CI_TESTING_CONFIG=../benchmark.ron` with the contents of `../benchmark.ron`: ```rust ( exit_after: Some(1500) ) ``` ...in order to run each test for 1500 frames. The recent changes to `many_cubes` and `bevymark` added reproducible random number generation so that with the same settings, the same rng will occur. They also added benchmark modes that use a fixed delta time for animations. Combined this means that the same frames should be rendered both on main and on the branch. The graphs compare main (yellow) to this PR (red). ### 3D Mesh `many_cubes --benchmark` <img width="1411" alt="Screenshot 2023-09-03 at 23 42 10" src="https://github.com/bevyengine/bevy/assets/302146/2088716a-c918-486c-8129-090b26fd2bc4"> The mesh and material are the same for all instances. This is basically the best case for the initial batching implementation as it results in 1 draw for the ~11.7k visible meshes. It gives a ~30% reduction in median frame time. The 1000th frame is identical using the flip tool:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4615 seconds ``` ### 3D Mesh `many_cubes --benchmark --material-texture-count 10` <img width="1404" alt="Screenshot 2023-09-03 at 23 45 18" src="https://github.com/bevyengine/bevy/assets/302146/5ee9c447-5bd2-45c6-9706-ac5ff8916daf"> This run uses 10 different materials by varying their textures. The materials are randomly selected, and there is no sorting by material bind group for opaque 3D so any batching is 'random'. The PR produces a ~5% reduction in median frame time. If we were to sort the opaque phase by the material bind group, then this should be a lot faster. This produces about 10.5k draws for the 11.7k visible entities. This makes sense as randomly selecting from 10 materials gives a chance that two adjacent entities randomly select the same material and can be batched. The 1000th frame is identical in flip:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4537 seconds ``` ### 3D Mesh `many_cubes --benchmark --vary-per-instance` <img width="1394" alt="Screenshot 2023-09-03 at 23 48 44" src="https://github.com/bevyengine/bevy/assets/302146/f02a816b-a444-4c18-a96a-63b5436f3b7f"> This run varies the material data per instance by randomly-generating its colour. This is the worst case for batching and that it performs about the same as `main` is a good thing as it demonstrates that the batching has minimal overhead when dealing with ~11k visible mesh entities. The 1000th frame is identical according to flip:  ``` Mean: 0.000000 Weighted median: 0.000000 1st weighted quartile: 0.000000 3rd weighted quartile: 0.000000 Min: 0.000000 Max: 0.000000 Evaluation time: 0.4568 seconds ``` ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d` <img width="1412" alt="Screenshot 2023-09-03 at 23 59 56" src="https://github.com/bevyengine/bevy/assets/302146/cb02ae07-237b-4646-ae9f-fda4dafcbad4"> This spawns 160 waves of 1000 quad meshes that are shaded with ColorMaterial. Each wave has a different material so 160 waves currently should result in 160 batches. This results in a 50% reduction in median frame time. Capturing a screenshot of the 1000th frame main vs PR gives:  ``` Mean: 0.001222 Weighted median: 0.750432 1st weighted quartile: 0.453494 3rd weighted quartile: 0.969758 Min: 0.000000 Max: 0.990296 Evaluation time: 0.4255 seconds ``` So they seem to produce the same results. I also double-checked the number of draws. `main` does 160000 draws, and the PR does 160, as expected. ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d --material-texture-count 10` <img width="1392" alt="Screenshot 2023-09-04 at 00 09 22" src="https://github.com/bevyengine/bevy/assets/302146/4358da2e-ce32-4134-82df-3ab74c40849c"> This generates 10 textures and generates materials for each of those and then selects one material per wave. The median frame time is reduced by 50%. Similar to the plain run above, this produces 160 draws on the PR and 160000 on `main` and the 1000th frame is identical (ignoring the fps counter text overlay).  ``` Mean: 0.002877 Weighted median: 0.964980 1st weighted quartile: 0.668871 3rd weighted quartile: 0.982749 Min: 0.000000 Max: 0.992377 Evaluation time: 0.4301 seconds ``` ### 2D Mesh `bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d --vary-per-instance` <img width="1396" alt="Screenshot 2023-09-04 at 00 13 53" src="https://github.com/bevyengine/bevy/assets/302146/b2198b18-3439-47ad-919a-cdabe190facb"> This creates unique materials per instance by randomly-generating the material's colour. This is the worst case for 2D batching. Somehow, this PR manages a 7% reduction in median frame time. Both main and this PR issue 160000 draws. The 1000th frame is the same:  ``` Mean: 0.001214 Weighted median: 0.937499 1st weighted quartile: 0.635467 3rd weighted quartile: 0.979085 Min: 0.000000 Max: 0.988971 Evaluation time: 0.4462 seconds ``` ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite` <img width="1396" alt="Screenshot 2023-09-04 at 12 21 12" src="https://github.com/bevyengine/bevy/assets/302146/8b31e915-d6be-4cac-abf5-c6a4da9c3d43"> This just spawns 160 waves of 1000 sprites. There should be and is no notable difference between main and the PR. ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite --material-texture-count 10` <img width="1389" alt="Screenshot 2023-09-04 at 12 36 08" src="https://github.com/bevyengine/bevy/assets/302146/45fe8d6d-c901-4062-a349-3693dd044413"> This spawns the sprites selecting a texture at random per instance from the 10 generated textures. This has no significant change vs main and shouldn't. ### 2D Sprite `bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite --vary-per-instance` <img width="1401" alt="Screenshot 2023-09-04 at 12 29 52" src="https://github.com/bevyengine/bevy/assets/302146/762c5c60-352e-471f-8dbe-bbf10e24ebd6"> This sets the sprite colour as being unique per instance. This can still all be drawn using one batch. There should be no difference but the PR produces median frame times that are 4% higher. Investigation showed no clear sources of cost, rather a mix of give and take that should not happen. It seems like noise in the results. ### Summary | Benchmark | % change in median frame time | | ------------- | ------------- | | many_cubes | 🟩 -30% | | many_cubes 10 materials | 🟩 -5% | | many_cubes unique materials | 🟩 ~0% | | bevymark mesh2d | 🟩 -50% | | bevymark mesh2d 10 materials | 🟩 -50% | | bevymark mesh2d unique materials | 🟩 -7% | | bevymark sprite | 🟥 2% | | bevymark sprite 10 materials | 🟥 0.6% | | bevymark sprite unique materials | 🟥 4.1% | --- ## Changelog - Added: 2D and 3D mesh entities that share the same mesh and material (same textures, same data) are now batched into the same draw command for better performance. --------- Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com> Co-authored-by: Nicola Papale <nico@nicopap.ch>	2023-09-21 22:12:34 +00:00
Nicola Papale	7163aabf29	Use a single line for of large binding lists (#9849) ... # Objective - When adding/removing bindings in large binding lists, git would generate very difficult-to-read diffs ## Solution - Move the `@group(X) @binding(Y)` into the same line as the binding type declaration	2023-09-19 22:17:44 +00:00
Nico Burns	b995827013	Have a separate implicit viewport node per root node + make viewport node Display::Grid (#9637) ... # Objective Make `bevy_ui` "root" nodes more intuitive to use/style by: - Removing the implicit flexbox styling (such as stretch alignment) that is applied to them, and replacing it with more intuitive CSS Grid styling (notably with stretch alignment disabled in both axes). - Making root nodes layout independently of each other. Instead of there being a single implicit "viewport" node that all root nodes are children of, there is now an implicit "viewport" node *per root node*. And layout of each tree is computed separately. ## Solution - Remove the global implicit viewport node, and instead create an implicit viewport node for each user-specified root node. - Keep track of both the user-specified root nodes and the implicit viewport nodes in a separate `Vec`. - Use the window's size as the `available_space` parameter to `Taffy.compute_layout` rather than setting it on the implicit viewport node (and set the viewport to `height: 100%; width: 100%` to make this "just work"). --- ## Changelog - Bevy UI now lays out root nodes independently of each other in separate layout contexts. - The implicit viewport node (which contains each user-specified root node) is now `Display::Grid` with `align_items` and `justify_items` both set to `Start`. ## Migration Guide - Bevy UI now lays out root nodes independently of each other in separate layout contexts. If you were relying on your root nodes being able to affect each other's layouts, then you may need to wrap them in a single root node. - The implicit viewport node (which contains each user-specified root node) is now `Display::Grid` with `align_items` and `justify_items` both set to `Start`. You may need to add `height: Val::Percent(100.)` to your root nodes if you were previously relying on being implicitly set.	2023-09-19 15:14:46 +00:00
Joseph	d5d355ae1f	Fix the clippy::explicit_iter_loop lint (#9834) ... # Objective Replace instances of ```rust for x in collection.iter{_mut}() { ``` with ```rust for x in &{mut} collection { ``` This also changes CI to no longer suppress this lint. Note that since this lint only shows up when using clippy in pedantic mode, it was probably unnecessary to suppress this lint in the first place.	2023-09-19 03:35:22 +00:00
ickshonpe	07f61a1146	Round UI coordinates after scaling (#9784) ... # Objective Fixes #9754 ## Solution Don't round UI coordinates until they've been multiplied by the inverse scale factor.	2023-09-18 22:55:43 +00:00
ickshonpe	dc124ee498	ContentSize replacement fix (#9753) ... # Objective If you remove a `ContentSize` component from a Bevy UI entity and then replace it `ui_layout_system` will remove the measure func from the internal Taffy layout tree but no new measure func will be generated to replace it since it's the widget systems that are responsible for creating their respective measure funcs not `ui_layout_system`. The widget systems only perform a measure func update on changes to a widget entity's content. This means that until its content is changed in some way, no content will be displayed by the node. ### Example This example spawns a text node which disappears after a few moments once its `ContentSize` component is replaced. ```rust use bevy::prelude::*; use bevy::ui::ContentSize; fn main() { App::new() .add_plugins(DefaultPlugins) .add_systems(Startup, setup) .add_systems(Update, delayed_replacement) .run(); } fn setup(mut commands: Commands) { commands.spawn(Camera2dBundle::default()); commands.spawn( TextBundle::from_section( "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.", TextStyle::default(), ) ); } // Waits a few frames to make sure the font is loaded and the text's glyph layout has been generated. fn delayed_replacement(mut commands: Commands, mut count: Local<usize>, query: Query<Entity, With<Style>>) { *count += 1; if *count == 10 { for item in query.iter() { commands .entity(item) .remove::<ContentSize>() .insert(ContentSize::default()); } } } ``` ## Solution Perform `ui_layout_system`'s `ContentSize` removal detection and resolution first, before the measure func updates. Then in the widget systems, generate a new `Measure` when a `ContentSize` component is added to a widget entity. ## Changelog * `measure_text_system`, `update_image_content_size_system` and `update_atlas_content_size_system` generate a new `Measure` when a `ContentSize` component is added.	2023-09-18 08:54:39 +00:00
ickshonpe	e1904bcba1	Derive Serialize and Deserialize for UiRect (#9820) ... # Objective Derive `Serialize` and `Deserialize` for `UiRect`	2023-09-15 19:51:57 +00:00
ickshonpe	462d2ff238	Move Val into geometry (#9818) ... # Objective `Val`'s natural place is in the `geometry` module with `UiRect`, not in `ui_node` with the components. ## Solution Move `Val` into `geometry`.	2023-09-15 12:45:32 +00:00
louis-le-cam	9ee9d627d7	Rename RemovedComponents::iter/iter_with_id to read/read_with_id (#9778) ... # Objective Rename RemovedComponents::iter/iter_with_id to read/read_with_id to make it clear that it consume the data Fixes #9755. (It's my first pull request, if i've made any mistake, please let me know) ## Solution Refactor RemovedComponents::iter/iter_with_id to read/read_with_id ## Changelog Refactor RemovedComponents::iter/iter_with_id to read/read_with_id Deprecate RemovedComponents::iter/iter_with_id Remove IntoIterator implementation Update removal_detection example accordingly --- ## Migration Guide Rename calls of RemovedComponents::iter/iter_with_id to read/read_with_id Replace IntoIterator iteration (&mut <RemovedComponents>) with .read() --------- Co-authored-by: denshi_ika <mojang2824@gmail.com>	2023-09-15 12:37:20 +00:00
ickshonpe	ca46d7c357	Add missing bevy_text feature attribute to TextBundle from impl (#9785) ... # Objective Add the `bevy_text` feature attribute to the `TextBundle` from impl in node_bundle.rs.	2023-09-13 19:24:24 +00:00
ickshonpe	97eda02f42	Add tests to bevy_ui::Layout (#9781) ... # Objective Add tests for `ui_layout_system` and `UiSurface` to the `bevy_ui::Layout` module. ## Solution Spawn a dummy window entity with `Window` and `PrimaryWindow` components so that `ui_layout_system` can run in a test without a window present. --- ## Changelog Added tests to the `bevy_ui::layout` module.	2023-09-12 22:08:27 +00:00
Charles Bournhonesque	0aa079fcf6	Fix doc comments for align items (#9739) ... # Objective One-line fix to a doc-comment for AlignItems Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>	2023-09-11 19:15:20 +00:00
ickshonpe	625d386940	impl From<String> and From<&str> for TextSection (#8856) ... # Objective Implement `From<String>` and `From<&str>` for `TextSection` Example from something I was working on earlier: ```rust parent.spawn(TextBundle::from_sections([ TextSection::new("press ".to_string(), TextStyle::default()), TextSection::new("space".to_string(), TextStyle { color: Color::YELLOW, ..default() }), TextSection::new(" to advance frames".to_string(), TextStyle::default()), ])); ``` After an `impl From<&str> for TextSection` : ```rust parent.spawn(TextBundle::from_sections([ "press ".into(), TextSection::new("space".to_string(), TextStyle { color: Color::YELLOW, ..default() }), " to advance frames".into(), ])); ``` * Potentially unhelpful without a default font, so behind the `default_font` feature. Co-authored-by: [hate](https://github.com/hate) --------- Co-authored-by: hate <15314665+hate@users.noreply.github.com>	2023-09-11 19:00:50 +00:00
ickshonpe	9d9750b928	TextLayoutInfo::size should hold the drawn size of the text, and not a scaled value. (#7794) ... # Objective `TextLayoutInfo::size` isn't the drawn size of the text, but a scaled value. This is fragile, counter-intuitive and makes it awkward to retrieve the correct value. ## Solution Multiply `TextLayoutInfo::size` by the reciprocal of the window's scale factor after generating the text layout in `update_text2d_layout` and `bevy_ui::widget::text_system`. --- fixes: #7787 ## Changelog * Multiply `TextLayoutInfo::size` by the reciprocal of the scale factor after text computation to reflect the actual size of the text as drawn. * Reorder the operations in `extract_text2d_sprite` to apply the alignment offset before the scale factor scaling. ## Migration Guide The `size` value of `TextLayoutInfo` is stored in logical pixels and has been renamed to `logical_size`. There is no longer any need to divide by the window's scale factor to get the logical size.	2023-09-11 18:56:16 +00:00
Joseph	8eb6ccdd87	Remove useless single tuples and trailing commas (#9720) ... # Objective Title	2023-09-08 21:46:54 +00:00
Carter Anderson	5eb292dc10	Bevy Asset V2 (#8624) ... # Bevy Asset V2 Proposal ## Why Does Bevy Need A New Asset System? Asset pipelines are a central part of the gamedev process. Bevy's current asset system is missing a number of features that make it non-viable for many classes of gamedev. After plenty of discussions and [a long community feedback period](https://github.com/bevyengine/bevy/discussions/3972), we've identified a number missing features: * **Asset Preprocessing**: it should be possible to "preprocess" / "compile" / "crunch" assets at "development time" rather than when the game starts up. This enables offloading expensive work from deployed apps, faster asset loading, less runtime memory usage, etc. * **Per-Asset Loader Settings**: Individual assets cannot define their own loaders that override the defaults. Additionally, they cannot provide per-asset settings to their loaders. This is a huge limitation, as many asset types don't provide all information necessary for Bevy _inside_ the asset. For example, a raw PNG image says nothing about how it should be sampled (ex: linear vs nearest). * **Asset `.meta` files**: assets should have configuration files stored adjacent to the asset in question, which allows the user to configure asset-type-specific settings. These settings should be accessible during the pre-processing phase. Modifying a `.meta` file should trigger a re-processing / re-load of the asset. It should be possible to configure asset loaders from the meta file. * **Processed Asset Hot Reloading**: Changes to processed assets (or their dependencies) should result in re-processing them and re-loading the results in live Bevy Apps. * **Asset Dependency Tracking**: The current bevy_asset has no good way to wait for asset dependencies to load. It punts this as an exercise for consumers of the loader apis, which is unreasonable and error prone. There should be easy, ergonomic ways to wait for assets to load and block some logic on an asset's entire dependency tree loading. * **Runtime Asset Loading**: it should be (optionally) possible to load arbitrary assets dynamically at runtime. This necessitates being able to deploy and run the asset server alongside Bevy Apps on _all platforms_. For example, we should be able to invoke the shader compiler at runtime, stream scenes from sources like the internet, etc. To keep deployed binaries (and startup times) small, the runtime asset server configuration should be configurable with different settings compared to the "pre processor asset server". * **Multiple Backends**: It should be possible to load assets from arbitrary sources (filesystems, the internet, remote asset serves, etc). * **Asset Packing**: It should be possible to deploy assets in compressed "packs", which makes it easier and more efficient to distribute assets with Bevy Apps. * **Asset Handoff**: It should be possible to hold a "live" asset handle, which correlates to runtime data, without actually holding the asset in memory. Ex: it must be possible to hold a reference to a GPU mesh generated from a "mesh asset" without keeping the mesh data in CPU memory * **Per-Platform Processed Assets**: Different platforms and app distributions have different capabilities and requirements. Some platforms need lower asset resolutions or different asset formats to operate within the hardware constraints of the platform. It should be possible to define per-platform asset processing profiles. And it should be possible to deploy only the assets required for a given platform. These features have architectural implications that are significant enough to require a full rewrite. The current Bevy Asset implementation got us this far, but it can take us no farther. This PR defines a brand new asset system that implements most of these features, while laying the foundations for the remaining features to be built. ## Bevy Asset V2 Here is a quick overview of the features introduced in this PR. * **Asset Preprocessing**: Preprocess assets at development time into more efficient (and configurable) representations * **Dependency Aware**: Dependencies required to process an asset are tracked. If an asset's processed dependency changes, it will be reprocessed * **Hot Reprocessing/Reloading**: detect changes to asset source files, reprocess them if they have changed, and then hot-reload them in Bevy Apps. * **Only Process Changes**: Assets are only re-processed when their source file (or meta file) has changed. This uses hashing and timestamps to avoid processing assets that haven't changed. * **Transactional and Reliable**: Uses write-ahead logging (a technique commonly used by databases) to recover from crashes / forced-exits. Whenever possible it avoids full-reprocessing / only uncompleted transactions will be reprocessed. When the processor is running in parallel with a Bevy App, processor asset writes block Bevy App asset reads. Reading metadata + asset bytes is guaranteed to be transactional / correctly paired. * **Portable / Run anywhere / Database-free**: The processor does not rely on an in-memory database (although it uses some database techniques for reliability). This is important because pretty much all in-memory databases have unsupported platforms or build complications. * **Configure Processor Defaults Per File Type**: You can say "use this processor for all files of this type". * **Custom Processors**: The `Processor` trait is flexible and unopinionated. It can be implemented by downstream plugins. * **LoadAndSave Processors**: Most asset processing scenarios can be expressed as "run AssetLoader A, save the results using AssetSaver X, and then load the result using AssetLoader B". For example, load this png image using `PngImageLoader`, which produces an `Image` asset and then save it using `CompressedImageSaver` (which also produces an `Image` asset, but in a compressed format), which takes an `Image` asset as input. This means if you have an `AssetLoader` for an asset, you are already half way there! It also means that you can share AssetSavers across multiple loaders. Because `CompressedImageSaver` accepts Bevy's generic Image asset as input, it means you can also use it with some future `JpegImageLoader`. * **Loader and Saver Settings**: Asset Loaders and Savers can now define their own settings types, which are passed in as input when an asset is loaded / saved. Each asset can define its own settings. * **Asset `.meta` files**: configure asset loaders, their settings, enable/disable processing, and configure processor settings * **Runtime Asset Dependency Tracking** Runtime asset dependencies (ex: if an asset contains a `Handle<Image>`) are tracked by the asset server. An event is emitted when an asset and all of its dependencies have been loaded * **Unprocessed Asset Loading**: Assets do not require preprocessing. They can be loaded directly. A processed asset is just a "normal" asset with some extra metadata. Asset Loaders don't need to know or care about whether or not an asset was processed. * **Async Asset IO**: Asset readers/writers use async non-blocking interfaces. Note that because Rust doesn't yet support async traits, there is a bit of manual Boxing / Future boilerplate. This will hopefully be removed in the near future when Rust gets async traits. * **Pluggable Asset Readers and Writers**: Arbitrary asset source readers/writers are supported, both by the processor and the asset server. * **Better Asset Handles** * **Single Arc Tree**: Asset Handles now use a single arc tree that represents the lifetime of the asset. This makes their implementation simpler, more efficient, and allows us to cheaply attach metadata to handles. Ex: the AssetPath of a handle is now directly accessible on the handle itself! * **Const Typed Handles**: typed handles can be constructed in a const context. No more weird "const untyped converted to typed at runtime" patterns! * **Handles and Ids are Smaller / Faster To Hash / Compare**: Typed `Handle<T>` is now much smaller in memory and `AssetId<T>` is even smaller. * **Weak Handle Usage Reduction**: In general Handles are now considered to be "strong". Bevy features that previously used "weak `Handle<T>`" have been ported to `AssetId<T>`, which makes it statically clear that the features do not hold strong handles (while retaining strong type information). Currently Handle::Weak still exists, but it is very possible that we can remove that entirely. * **Efficient / Dense Asset Ids**: Assets now have efficient dense runtime asset ids, which means we can avoid expensive hash lookups. Assets are stored in Vecs instead of HashMaps. There are now typed and untyped ids, which means we no longer need to store dynamic type information in the ID for typed handles. "AssetPathId" (which was a nightmare from a performance and correctness standpoint) has been entirely removed in favor of dense ids (which are retrieved for a path on load) * **Direct Asset Loading, with Dependency Tracking**: Assets that are defined at runtime can still have their dependencies tracked by the Asset Server (ex: if you create a material at runtime, you can still wait for its textures to load). This is accomplished via the (currently optional) "asset dependency visitor" trait. This system can also be used to define a set of assets to load, then wait for those assets to load. * **Async folder loading**: Folder loading also uses this system and immediately returns a handle to the LoadedFolder asset, which means folder loading no longer blocks on directory traversals. * **Improved Loader Interface**: Loaders now have a specific "top level asset type", which makes returning the top-level asset simpler and statically typed. * **Basic Image Settings and Processing**: Image assets can now be processed into the gpu-friendly Basic Universal format. The ImageLoader now has a setting to define what format the image should be loaded as. Note that this is just a minimal MVP ... plenty of additional work to do here. To demo this, enable the `basis-universal` feature and turn on asset processing. * **Simpler Audio Play / AudioSink API**: Asset handle providers are cloneable, which means the Audio resource can mint its own handles. This means you can now do `let sink_handle = audio.play(music)` instead of `let sink_handle = audio_sinks.get_handle(audio.play(music))`. Note that this might still be replaced by https://github.com/bevyengine/bevy/pull/8424. **Removed Handle Casting From Engine Features**: Ex: FontAtlases no longer use casting between handle types ## Using The New Asset System ### Normal Unprocessed Asset Loading By default the `AssetPlugin` does not use processing. It behaves pretty much the same way as the old system. If you are defining a custom asset, first derive `Asset`: ```rust #[derive(Asset)] struct Thing { value: String, } ``` Initialize the asset: ```rust app.init_asset:<Thing>() ``` Implement a new `AssetLoader` for it: ```rust #[derive(Default)] struct ThingLoader; #[derive(Serialize, Deserialize, Default)] pub struct ThingSettings { some_setting: bool, } impl AssetLoader for ThingLoader { type Asset = Thing; type Settings = ThingSettings; fn load<'a>( &'a self, reader: &'a mut Reader, settings: &'a ThingSettings, load_context: &'a mut LoadContext, ) -> BoxedFuture<'a, Result<Thing, anyhow::Error>> { Box::pin(async move { let mut bytes = Vec::new(); reader.read_to_end(&mut bytes).await?; // convert bytes to value somehow Ok(Thing { value }) }) } fn extensions(&self) -> &[&str] { &["thing"] } } ``` Note that this interface will get much cleaner once Rust gets support for async traits. `Reader` is an async futures_io::AsyncRead. You can stream bytes as they come in or read them all into a `Vec<u8>`, depending on the context. You can use `let handle = load_context.load(path)` to kick off a dependency load, retrieve a handle, and register the dependency for the asset. Then just register the loader in your Bevy app: ```rust app.init_asset_loader::<ThingLoader>() ``` Now just add your `Thing` asset files into the `assets` folder and load them like this: ```rust fn system(asset_server: Res<AssetServer>) { let handle = Handle<Thing> = asset_server.load("cool.thing"); } ``` You can check load states directly via the asset server: ```rust if asset_server.load_state(&handle) == LoadState::Loaded { } ``` You can also listen for events: ```rust fn system(mut events: EventReader<AssetEvent<Thing>>, handle: Res<SomeThingHandle>) { for event in events.iter() { if event.is_loaded_with_dependencies(&handle) { } } } ``` Note the new `AssetEvent::LoadedWithDependencies`, which only fires when the asset is loaded _and_ all dependencies (and their dependencies) have loaded. Unlike the old asset system, for a given asset path all `Handle<T>` values point to the same underlying Arc. This means Handles can cheaply hold more asset information, such as the AssetPath: ```rust // prints the AssetPath of the handle info!("{:?}", handle.path()) ``` ### Processed Assets Asset processing can be enabled via the `AssetPlugin`. When developing Bevy Apps with processed assets, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev())) ``` This runs the `AssetProcessor` in the background with hot-reloading. It reads assets from the `assets` folder, processes them, and writes them to the `.imported_assets` folder. Asset loads in the Bevy App will wait for a processed version of the asset to become available. If an asset in the `assets` folder changes, it will be reprocessed and hot-reloaded in the Bevy App. When deploying processed Bevy apps, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed())) ``` This does not run the `AssetProcessor` in the background. It behaves like `AssetPlugin::unprocessed()`, but reads assets from `.imported_assets`. When the `AssetProcessor` is running, it will populate sibling `.meta` files for assets in the `assets` folder. Meta files for assets that do not have a processor configured look like this: ```rust ( meta_format_version: "1.0", asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` This is metadata for an image asset. For example, if you have `assets/my_sprite.png`, this could be the metadata stored at `assets/my_sprite.png.meta`. Meta files are totally optional. If no metadata exists, the default settings will be used. In short, this file says "load this asset with the ImageLoader and use the file extension to determine the image type". This type of meta file is supported in all AssetPlugin modes. If in `Unprocessed` mode, the asset (with the meta settings) will be loaded directly. If in `ProcessedDev` mode, the asset file will be copied directly to the `.imported_assets` folder. The meta will also be copied directly to the `.imported_assets` folder, but with one addition: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 12415480888597742505, full_hash: 14344495437905856884, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` `processed_info` contains `hash` (a direct hash of the asset and meta bytes), `full_hash` (a hash of `hash` and the hashes of all `process_dependencies`), and `process_dependencies` (the `path` and `full_hash` of every process_dependency). A "process dependency" is an asset dependency that is _directly_ used when processing the asset. Images do not have process dependencies, so this is empty. When the processor is enabled, you can use the `Process` metadata config: ```rust ( meta_format_version: "1.0", asset: Process( processor: "bevy_asset::processor::process::LoadAndSave<bevy_render::texture::image_loader::ImageLoader, bevy_render::texture::compressed_image_saver::CompressedImageSaver>", settings: ( loader_settings: ( format: FromExtension, ), saver_settings: ( generate_mipmaps: true, ), ), ), ) ``` This configures the asset to use the `LoadAndSave` processor, which runs an AssetLoader and feeds the result into an AssetSaver (which saves the given Asset and defines a loader to load it with). (for terseness LoadAndSave will likely get a shorter/friendlier type name when [Stable Type Paths](#7184) lands). `LoadAndSave` is likely to be the most common processor type, but arbitrary processors are supported. `CompressedImageSaver` saves an `Image` in the Basis Universal format and configures the ImageLoader to load it as basis universal. The `AssetProcessor` will read this meta, run it through the LoadAndSave processor, and write the basis-universal version of the image to `.imported_assets`. The final metadata will look like this: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 905599590923828066, full_hash: 9948823010183819117, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: Format(Basis), ), ), ) ``` To try basis-universal processing out in Bevy examples, (for example `sprite.rs`), change `add_plugins(DefaultPlugins)` to `add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))` and run with the `basis-universal` feature enabled: `cargo run --features=basis-universal --example sprite`. To create a custom processor, there are two main paths: 1. Use the `LoadAndSave` processor with an existing `AssetLoader`. Implement the `AssetSaver` trait, register the processor using `asset_processor.register_processor::<LoadAndSave<ImageLoader, CompressedImageSaver>>(image_saver.into())`. 2. Implement the `Process` trait directly and register it using: `asset_processor.register_processor(thing_processor)`. You can configure default processors for file extensions like this: ```rust asset_processor.set_default_processor::<ThingProcessor>("thing") ``` There is one more metadata type to be aware of: ```rust ( meta_format_version: "1.0", asset: Ignore, ) ``` This will ignore the asset during processing / prevent it from being written to `.imported_assets`. The AssetProcessor stores a transaction log at `.imported_assets/log` and uses it to gracefully recover from unexpected stops. This means you can force-quit the processor (and Bevy Apps running the processor in parallel) at arbitrary times! `.imported_assets` is "local state". It should _not_ be checked into source control. It should also be considered "read only". In practice, you _can_ modify processed assets and processed metadata if you really need to test something. But those modifications will not be represented in the hashes of the assets, so the processed state will be "out of sync" with the source assets. The processor _will not_ fix this for you. Either revert the change after you have tested it, or delete the processed files so they can be re-populated. ## Open Questions There are a number of open questions to be discussed. We should decide if they need to be addressed in this PR and if so, how we will address them: ### Implied Dependencies vs Dependency Enumeration There are currently two ways to populate asset dependencies: * **Implied via AssetLoaders**: if an AssetLoader loads an asset (and retrieves a handle), a dependency is added to the list. * **Explicit via the optional Asset::visit_dependencies**: if `server.load_asset(my_asset)` is called, it will call `my_asset.visit_dependencies`, which will grab dependencies that have been manually defined for the asset via the Asset trait impl (which can be derived). This means that defining explicit dependencies is optional for "loaded assets". And the list of dependencies is always accurate because loaders can only produce Handles if they register dependencies. If an asset was loaded with an AssetLoader, it only uses the implied dependencies. If an asset was created at runtime and added with `asset_server.load_asset(MyAsset)`, it will use `Asset::visit_dependencies`. However this can create a behavior mismatch between loaded assets and equivalent "created at runtime" assets if `Assets::visit_dependencies` doesn't exactly match the dependencies produced by the AssetLoader. This behavior mismatch can be resolved by completely removing "implied loader dependencies" and requiring `Asset::visit_dependencies` to supply dependency data. But this creates two problems: * It makes defining loaded assets harder and more error prone: Devs must remember to manually annotate asset dependencies with `#[dependency]` when deriving `Asset`. For more complicated assets (such as scenes), the derive likely wouldn't be sufficient and a manual `visit_dependencies` impl would be required. * Removes the ability to immediately kick off dependency loads: When AssetLoaders retrieve a Handle, they also immediately kick off an asset load for the handle, which means it can start loading in parallel _before_ the asset finishes loading. For large assets, this could be significant. (although this could be mitigated for processed assets if we store dependencies in the processed meta file and load them ahead of time) ### Eager ProcessorDev Asset Loading I made a controversial call in the interest of fast startup times ("time to first pixel") for the "processor dev mode configuration". When initializing the AssetProcessor, current processed versions of unchanged assets are yielded immediately, even if their dependencies haven't been checked yet for reprocessing. This means that non-current-state-of-filesystem-but-previously-valid assets might be returned to the App first, then hot-reloaded if/when their dependencies change and the asset is reprocessed. Is this behavior desirable? There is largely one alternative: do not yield an asset from the processor to the app until all of its dependencies have been checked for changes. In some common cases (load dependency has not changed since last run) this will increase startup time. The main question is "by how much" and is that slower startup time worth it in the interest of only yielding assets that are true to the current state of the filesystem. Should this be configurable? I'm starting to think we should only yield an asset after its (historical) dependencies have been checked for changes + processed as necessary, but I'm curious what you all think. ### Paths Are Currently The Only Canonical ID / Do We Want Asset UUIDs? In this implementation AssetPaths are the only canonical asset identifier (just like the previous Bevy Asset system and Godot). Moving assets will result in re-scans (and currently reprocessing, although reprocessing can easily be avoided with some changes). Asset renames/moves will break code and assets that rely on specific paths, unless those paths are fixed up. Do we want / need "stable asset uuids"? Introducing them is very possible: 1. Generate a UUID and include it in .meta files 2. Support UUID in AssetPath 3. Generate "asset indices" which are loaded on startup and map UUIDs to paths. 4 (maybe). Consider only supporting UUIDs for processed assets so we can generate quick-to-load indices instead of scanning meta files. The main "pro" is that assets referencing UUIDs don't need to be migrated when a path changes. The main "con" is that UUIDs cannot be "lazily resolved" like paths. They need a full view of all assets to answer the question "does this UUID exist". Which means UUIDs require the AssetProcessor to fully finish startup scans before saying an asset doesnt exist. And they essentially require asset pre-processing to use in apps, because scanning all asset metadata files at runtime to resolve a UUID is not viable for medium-to-large apps. It really requires a pre-generated UUID index, which must be loaded before querying for assets. I personally think this should be investigated in a separate PR. Paths aren't going anywhere ... _everyone_ uses filesystems (and filesystem-like apis) to manage their asset source files. I consider them permanent canonical asset information. Additionally, they behave well for both processed and unprocessed asset modes. Given that Bevy is supporting both, this feels like the right canonical ID to start with. UUIDS (and maybe even other indexed-identifier types) can be added later as necessary. ### Folder / File Naming Conventions All asset processing config currently lives in the `.imported_assets` folder. The processor transaction log is in `.imported_assets/log`. Processed assets are added to `.imported_assets/Default`, which will make migrating to processed asset profiles (ex: a `.imported_assets/Mobile` profile) a non-breaking change. It also allows us to create top-level files like `.imported_assets/log` without it being interpreted as an asset. Meta files currently have a `.meta` suffix. Do we like these names and conventions? ### Should the `AssetPlugin::processed_dev` configuration enable `watch_for_changes` automatically? Currently it does (which I think makes sense), but it does make it the only configuration that enables watch_for_changes by default. ### Discuss on_loaded High Level Interface: This PR includes a very rough "proof of concept" `on_loaded` system adapter that uses the `LoadedWithDependencies` event in combination with `asset_server.load_asset` dependency tracking to support this pattern ```rust fn main() { App::new() .init_asset::<MyAssets>() .add_systems(Update, on_loaded(create_array_texture)) .run(); } #[derive(Asset, Clone)] struct MyAssets { #[dependency] picture_of_my_cat: Handle<Image>, #[dependency] picture_of_my_other_cat: Handle<Image>, } impl FromWorld for ArrayTexture { fn from_world(world: &mut World) -> Self { picture_of_my_cat: server.load("meow.png"), picture_of_my_other_cat: server.load("meeeeeeeow.png"), } } fn spawn_cat(In(my_assets): In<MyAssets>, mut commands: Commands) { commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_cat.clone(), ..default() }); commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_other_cat.clone(), ..default() }); } ``` The implementation is _very_ rough. And it is currently unsafe because `bevy_ecs` doesn't expose some internals to do this safely from inside `bevy_asset`. There are plenty of unanswered questions like: * "do we add a Loadable" derive? (effectively automate the FromWorld implementation above) * Should `MyAssets` even be an Asset? (largely implemented this way because it elegantly builds on `server.load_asset(MyAsset { .. })` dependency tracking). We should think hard about what our ideal API looks like (and if this is a pattern we want to support). Not necessarily something we need to solve in this PR. The current `on_loaded` impl should probably be removed from this PR before merging. ## Clarifying Questions ### What about Assets as Entities? This Bevy Asset V2 proposal implementation initially stored Assets as ECS Entities. Instead of `AssetId<T>` + the `Assets<T>` resource it used `Entity` as the asset id and Asset values were just ECS components. There are plenty of compelling reasons to do this: 1. Easier to inline assets in Bevy Scenes (as they are "just" normal entities + components) 2. More flexible queries: use the power of the ECS to filter assets (ex: `Query<Mesh, With<Tree>>`). 3. Extensible. Users can add arbitrary component data to assets. 4. Things like "component visualization tools" work out of the box to visualize asset data. However Assets as Entities has a ton of caveats right now: * We need to be able to allocate entity ids without a direct World reference (aka rework id allocator in Entities ... i worked around this in my prototypes by just pre allocating big chunks of entities) * We want asset change events in addition to ECS change tracking ... how do we populate them when mutations can come from anywhere? Do we use Changed queries? This would require iterating over the change data for all assets every frame. Is this acceptable or should we implement a new "event based" component change detection option? * Reconciling manually created assets with asset-system managed assets has some nuance (ex: are they "loaded" / do they also have that component metadata?) * "how do we handle "static" / default entity handles" (ties in to the Entity Indices discussion: https://github.com/bevyengine/bevy/discussions/8319). This is necessary for things like "built in" assets and default handles in things like SpriteBundle. * Storing asset information as a component makes it easy to "invalidate" asset state by removing the component (or forcing modifications). Ideally we have ways to lock this down (some combination of Rust type privacy and ECS validation) In practice, how we store and identify assets is a reasonably superficial change (porting off of Assets as Entities and implementing dedicated storage + ids took less than a day). So once we sort out the remaining challenges the flip should be straightforward. Additionally, I do still have "Assets as Entities" in my commit history, so we can reuse that work. I personally think "assets as entities" is a good endgame, but it also doesn't provide _significant_ value at the moment and it certainly isn't ready yet with the current state of things. ### Why not Distill? [Distill](https://github.com/amethyst/distill) is a high quality fully featured asset system built in Rust. It is very natural to ask "why not just use Distill?". It is also worth calling out that for awhile, [we planned on adopting Distill / I signed off on it](https://github.com/bevyengine/bevy/issues/708). However I think Bevy has a number of constraints that make Distill adoption suboptimal: * **Architectural Simplicity:** * Distill's processor requires an in-memory database (lmdb) and RPC networked API (using Cap'n Proto). Each of these introduces API complexity that increases maintenance burden and "code grokability". Ignoring tests, documentation, and examples, Distill has 24,237 lines of Rust code (including generated code for RPC + database interactions). If you ignore generated code, it has 11,499 lines. * Bevy builds the AssetProcessor and AssetServer using pluggable AssetReader/AssetWriter Rust traits with simple io interfaces. They do not necessitate databases or RPC interfaces (although Readers/Writers could use them if that is desired). Bevy Asset V2 (at the time of writing this PR) is 5,384 lines of Rust code (ignoring tests, documentation, and examples). Grain of salt: Distill does have more features currently (ex: Asset Packing, GUIDS, remote-out-of-process asset processor). I do plan to implement these features in Bevy Asset V2 and I personally highly doubt they will meaningfully close the 6115 lines-of-code gap. * This complexity gap (which while illustrated by lines of code, is much bigger than just that) is noteworthy to me. Bevy should be hackable and there are pillars of Distill that are very hard to understand and extend. This is a matter of opinion (and Bevy Asset V2 also has complicated areas), but I think Bevy Asset V2 is much more approachable for the average developer. * Necessary disclaimer: counting lines of code is an extremely rough complexity metric. Read the code and form your own opinions. * **Optional Asset Processing:** Not all Bevy Apps (or Bevy App developers) need / want asset preprocessing. Processing increases the complexity of the development environment by introducing things like meta files, imported asset storage, running processors in the background, waiting for processing to finish, etc. Distill _requires_ preprocessing to work. With Bevy Asset V2 processing is fully opt-in. The AssetServer isn't directly aware of asset processors at all. AssetLoaders only care about converting bytes to runtime Assets ... they don't know or care if the bytes were pre-processed or not. Processing is "elegantly" (forgive my self-congratulatory phrasing) layered on top and builds on the existing Asset system primitives. * **Direct Filesystem Access to Processed Asset State:** Distill stores processed assets in a database. This makes debugging / inspecting the processed outputs harder (either requires special tooling to query the database or they need to be "deployed" to be inspected). Bevy Asset V2, on the other hand, stores processed assets in the filesystem (by default ... this is configurable). This makes interacting with the processed state more natural. Note that both Godot and Unity's new asset system store processed assets in the filesystem. * **Portability**: Because Distill's processor uses lmdb and RPC networking, it cannot be run on certain platforms (ex: lmdb is a non-rust dependency that cannot run on the web, some platforms don't support running network servers). Bevy should be able to process assets everywhere (ex: run the Bevy Editor on the web, compile + process shaders on mobile, etc). Distill does partially mitigate this problem by supporting "streaming" assets via the RPC protocol, but this is not a full solve from my perspective. And Bevy Asset V2 can (in theory) also stream assets (without requiring RPC, although this isn't implemented yet) Note that I _do_ still think Distill would be a solid asset system for Bevy. But I think the approach in this PR is a better solve for Bevy's specific "asset system requirements". ### Doesn't async-fs just shim requests to "sync" `std::fs`? What is the point? "True async file io" has limited / spotty platform support. async-fs (and the rust async ecosystem generally ... ex Tokio) currently use async wrappers over std::fs that offload blocking requests to separate threads. This may feel unsatisfying, but it _does_ still provide value because it prevents our task pools from blocking on file system operations (which would prevent progress when there are many tasks to do, but all threads in a pool are currently blocking on file system ops). Additionally, using async APIs for our AssetReaders and AssetWriters also provides value because we can later add support for "true async file io" for platforms that support it. _And_ we can implement other "true async io" asset backends (such as networked asset io). ## Draft TODO - [x] Fill in missing filesystem event APIs: file removed event (which is expressed as dangling RenameFrom events in some cases), file/folder renamed event - [x] Assets without loaders are not moved to the processed folder. This breaks things like referenced `.bin` files for GLTFs. This should be configurable per-non-asset-type. - [x] Initial implementation of Reflect and FromReflect for Handle. The "deserialization" parity bar is low here as this only worked with static UUIDs in the old impl ... this is a non-trivial problem. Either we add a Handle::AssetPath variant that gets "upgraded" to a strong handle on scene load or we use a separate AssetRef type for Bevy scenes (which is converted to a runtime Handle on load). This deserves its own discussion in a different pr. - [x] Populate read_asset_bytes hash when run by the processor (a bit of a special case .. when run by the processor the processed meta will contain the hash so we don't need to compute it on the spot, but we don't want/need to read the meta when run by the main AssetServer) - [x] Delay hot reloading: currently filesystem events are handled immediately, which creates timing issues in some cases. For example hot reloading images can sometimes break because the image isn't finished writing. We should add a delay, likely similar to the [implementation in this PR](https://github.com/bevyengine/bevy/pull/8503). - [x] Port old platform-specific AssetIo implementations to the new AssetReader interface (currently missing Android and web) - [x] Resolve on_loaded unsafety (either by removing the API entirely or removing the unsafe) - [x] Runtime loader setting overrides - [x] Remove remaining unwraps that should be error-handled. There are number of TODOs here - [x] Pretty AssetPath Display impl - [x] Document more APIs - [x] Resolve spurious "reloading because it has changed" events (to repro run load_gltf with `processed_dev()`) - [x] load_dependency hot reloading currently only works for processed assets. If processing is disabled, load_dependency changes are not hot reloaded. - [x] Replace AssetInfo dependency load/fail counters with `loading_dependencies: HashSet<UntypedAssetId>` to prevent reloads from (potentially) breaking counters. Storing this will also enable "dependency reloaded" events (see [Next Steps](#next-steps)) - [x] Re-add filesystem watcher cargo feature gate (currently it is not optional) - [ ] Migration Guide - [ ] Changelog ## Followup TODO - [ ] Replace "eager unchanged processed asset loading" behavior with "don't returned unchanged processed asset until dependencies have been checked". - [ ] Add true `Ignore` AssetAction that does not copy the asset to the imported_assets folder. - [ ] Finish "live asset unloading" (ex: free up CPU asset memory after uploading an image to the GPU), rethink RenderAssets, and port renderer features. The `Assets` collection uses `Option<T>` for asset storage to support its removal. (1) the Option might not actually be necessary ... might be able to just remove from the collection entirely (2) need to finalize removal apis - [ ] Try replacing the "channel based" asset id recycling with something a bit more efficient (ex: we might be able to use raw atomic ints with some cleverness) - [ ] Consider adding UUIDs to processed assets (scoped just to helping identify moved assets ... not exposed to load queries ... see [Next Steps](#next-steps)) - [ ] Store "last modified" source asset and meta timestamps in processed meta files to enable skipping expensive hashing when the file wasn't changed - [ ] Fix "slow loop" handle drop fix - [ ] Migrate to TypeName - [x] Handle "loader preregistration". See #9429 ## Next Steps * **Configurable per-type defaults for AssetMeta**: It should be possible to add configuration like "all png image meta should default to using nearest sampling" (currently this hard-coded per-loader/processor Settings::default() impls). Also see the "Folder Meta" bullet point. * **Avoid Reprocessing on Asset Renames / Moves**: See the "canonical asset ids" discussion in [Open Questions](#open-questions) and the relevant bullet point in [Draft TODO](#draft-todo). Even without canonical ids, folder renames could avoid reprocessing in some cases. * **Multiple Asset Sources**: Expand AssetPath to support "asset source names" and support multiple AssetReaders in the asset server (ex: `webserver://some_path/image.png` backed by an Http webserver AssetReader). The "default" asset reader would use normal `some_path/image.png` paths. Ideally this works in combination with multiple AssetWatchers for hot-reloading * **Stable Type Names**: this pr removes the TypeUuid requirement from assets in favor of `std::any::type_name`. This makes defining assets easier (no need to generate a new uuid / use weird proc macro syntax). It also makes reading meta files easier (because things have "friendly names"). We also use type names for components in scene files. If they are good enough for components, they are good enough for assets. And consistency across Bevy pillars is desirable. However, `std::any::type_name` is not guaranteed to be stable (although in practice it is). We've developed a [stable type path](https://github.com/bevyengine/bevy/pull/7184) to resolve this, which should be adopted when it is ready. * **Command Line Interface**: It should be possible to run the asset processor in a separate process from the command line. This will also require building a network-server-backed AssetReader to communicate between the app and the processor. We've been planning to build a "bevy cli" for awhile. This seems like a good excuse to build it. * **Asset Packing**: This is largely an additive feature, so it made sense to me to punt this until we've laid the foundations in this PR. * **Per-Platform Processed Assets**: It should be possible to generate assets for multiple platforms by supporting multiple "processor profiles" per asset (ex: compress with format X on PC and Y on iOS). I think there should probably be arbitrary "profiles" (which can be separate from actual platforms), which are then assigned to a given platform when generating the final asset distribution for that platform. Ex: maybe devs want a "Mobile" profile that is shared between iOS and Android. Or a "LowEnd" profile shared between web and mobile. * **Versioning and Migrations**: Assets, Loaders, Savers, and Processors need to have versions to determine if their schema is valid. If an asset / loader version is incompatible with the current version expected at runtime, the processor should be able to migrate them. I think we should try using Bevy Reflect for this, as it would allow us to load the old version as a dynamic Reflect type without actually having the old Rust type. It would also allow us to define "patches" to migrate between versions (Bevy Reflect devs are currently working on patching). The `.meta` file already has its own format version. Migrating that to new versions should also be possible. * **Real Copy-on-write AssetPaths**: Rust's actual Cow (clone-on-write type) currently used by AssetPath can still result in String clones that aren't actually necessary (cloning an Owned Cow clones the contents). Bevy's asset system requires cloning AssetPaths in a number of places, which result in actual clones of the internal Strings. This is not efficient. AssetPath internals should be reworked to exhibit truer cow-like-behavior that reduces String clones to the absolute minimum. * **Consider processor-less processing**: In theory the AssetServer could run processors "inline" even if the background AssetProcessor is disabled. If we decide this is actually desirable, we could add this. But I don't think its a priority in the short or medium term. * **Pre-emptive dependency loading**: We could encode dependencies in processed meta files, which could then be used by the Asset Server to kick of dependency loads as early as possible (prior to starting the actual asset load). Is this desirable? How much time would this save in practice? * **Optimize Processor With UntypedAssetIds**: The processor exclusively uses AssetPath to identify assets currently. It might be possible to swap these out for UntypedAssetIds in some places, which are smaller / cheaper to hash and compare. * **One to Many Asset Processing**: An asset source file that produces many assets currently must be processed into a single "processed" asset source. If labeled assets can be written separately they can each have their own configured savers _and_ they could be loaded more granularly. Definitely worth exploring! * **Automatically Track "Runtime-only" Asset Dependencies**: Right now, tracking "created at runtime" asset dependencies requires adding them via `asset_server.load_asset(StandardMaterial::default())`. I think with some cleverness we could also do this for `materials.add(StandardMaterial::default())`, making tracking work "everywhere". There are challenges here relating to change detection / ensuring the server is made aware of dependency changes. This could be expensive in some cases. * **"Dependency Changed" events**: Some assets have runtime artifacts that need to be re-generated when one of their dependencies change (ex: regenerate a material's bind group when a Texture needs to change). We are generating the dependency graph so we can definitely produce these events. Buuuuut generating these events will have a cost / they could be high frequency for some assets, so we might want this to be opt-in for specific cases. * **Investigate Storing More Information In Handles**: Handles can now store arbitrary information, which makes it cheaper and easier to access. How much should we move into them? Canonical asset load states (via atomics)? (`handle.is_loaded()` would be very cool). Should we store the entire asset and remove the `Assets<T>` collection? (`Arc<RwLock<Option<Image>>>`?) * **Support processing and loading files without extensions**: This is a pretty arbitrary restriction and could be supported with very minimal changes. * **Folder Meta**: It would be nice if we could define per folder processor configuration defaults (likely in a `.meta` or `.folder_meta` file). Things like "default to linear filtering for all Images in this folder". * **Replace async_broadcast with event-listener?** This might be approximately drop-in for some uses and it feels more light weight * **Support Running the AssetProcessor on the Web**: Most of the hard work is done here, but there are some easy straggling TODOs (make the transaction log an interface instead of a direct file writer so we can write a web storage backend, implement an AssetReader/AssetWriter that reads/writes to something like LocalStorage). * **Consider identifying and preventing circular dependencies**: This is especially important for "processor dependencies", as processing will silently never finish in these cases. * **Built-in/Inlined Asset Hot Reloading**: This PR regresses "built-in/inlined" asset hot reloading (previously provided by the DebugAssetServer). I'm intentionally punting this because I think it can be cleanly implemented with "multiple asset sources" by registering a "debug asset source" (ex: `debug://bevy_pbr/src/render/pbr.wgsl` asset paths) in combination with an AssetWatcher for that asset source and support for "manually loading pats with asset bytes instead of AssetReaders". The old DebugAssetServer was quite nasty and I'd love to avoid that hackery going forward. * **Investigate ways to remove double-parsing meta files**: Parsing meta files currently involves parsing once with "minimal" versions of the meta file to extract the type name of the loader/processor config, then parsing again to parse the "full" meta. This is suboptimal. We should be able to define custom deserializers that (1) assume the loader/processor type name comes first (2) dynamically looks up the loader/processor registrations to deserialize settings in-line (similar to components in the bevy scene format). Another alternative: deserialize as dynamic Reflect objects and then convert. * **More runtime loading configuration**: Support using the Handle type as a hint to select an asset loader (instead of relying on AssetPath extensions) * **More high level Processor trait implementations**: For example, it might be worth adding support for arbitrary chains of "asset transforms" that modify an in-memory asset representation between loading and saving. (ex: load a Mesh, run a `subdivide_mesh` transform, followed by a `flip_normals` transform, then save the mesh to an efficient compressed format). * **Bevy Scene Handle Deserialization**: (see the relevant [Draft TODO item](#draft-todo) for context) * **Explore High Level Load Interfaces**: See [this discussion](#discuss-on_loaded-high-level-interface) for one prototype. * **Asset Streaming**: It would be great if we could stream Assets (ex: stream a long video file piece by piece) * **ID Exchanging**: In this PR Asset Handles/AssetIds are bigger than they need to be because they have a Uuid enum variant. If we implement an "id exchanging" system that trades Uuids for "efficient runtime ids", we can cut down on the size of AssetIds, making them more efficient. This has some open design questions, such as how to spawn entities with "default" handle values (as these wouldn't have access to the exchange api in the current system). * **Asset Path Fixup Tooling**: Assets that inline asset paths inside them will break when an asset moves. The asset system provides the functionality to detect when paths break. We should build a framework that enables formats to define "path migrations". This is especially important for scene files. For editor-generated files, we should also consider using UUIDs (see other bullet point) to avoid the need to migrate in these cases. --------- Co-authored-by: BeastLe9enD <beastle9end@outlook.de> Co-authored-by: Mike <mike.hsu@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>	2023-09-07 02:07:27 +00:00
Sludge	ea734ab5f4	bevy_ui: reflect missing types (#9677) ... Register `UiCameraConfig` and `UiTextureAtlasImage`, and derive `Reflect` on `UiScale` and register that too.	2023-09-02 20:41:17 +00:00
Joseph	02b520b4e8	Split ComputedVisibility into two components to allow for accurate change detection and speed up visibility propagation (#9497) ... # Objective Fix #8267. Fixes half of #7840. The `ComputedVisibility` component contains two flags: hierarchy visibility, and view visibility (whether its visible to any cameras). Due to the modular and open-ended way that view visibility is computed, it triggers change detection every single frame, even when the value does not change. Since hierarchy visibility is stored in the same component as view visibility, this means that change detection for inherited visibility is completely broken. At the company I work for, this has become a real issue. We are using change detection to only re-render scenes when necessary. The broken state of change detection for computed visibility means that we have to to rely on the non-inherited `Visibility` component for now. This is workable in the early stages of our project, but since we will inevitably want to use the hierarchy, we will have to either: 1. Roll our own solution for computed visibility. 2. Fix the issue for everyone. ## Solution Split the `ComputedVisibility` component into two: `InheritedVisibilty` and `ViewVisibility`. This allows change detection to behave properly for `InheritedVisibility`. View visiblity is still erratic, although it is less useful to be able to detect changes for this flavor of visibility. Overall, this actually simplifies the API. Since the visibility system consists of self-explaining components, it is much easier to document the behavior and usage. This approach is more modular and "ECS-like" -- one could strip out the `ViewVisibility` component entirely if it's not needed, and rely only on inherited visibility. --- ## Changelog - `ComputedVisibility` has been removed in favor of: `InheritedVisibility` and `ViewVisiblity`. ## Migration Guide The `ComputedVisibilty` component has been split into `InheritedVisiblity` and `ViewVisibility`. Replace any usages of `ComputedVisibility::is_visible_in_hierarchy` with `InheritedVisibility::get`, and replace `ComputedVisibility::is_visible_in_view` with `ViewVisibility::get`. ```rust // Before: commands.spawn(VisibilityBundle { visibility: Visibility::Inherited, computed_visibility: ComputedVisibility::default(), }); // After: commands.spawn(VisibilityBundle { visibility: Visibility::Inherited, inherited_visibility: InheritedVisibility::default(), view_visibility: ViewVisibility::default(), }); ``` ```rust // Before: fn my_system(q: Query<&ComputedVisibilty>) { for vis in &q { if vis.is_visible_in_hierarchy() { // After: fn my_system(q: Query<&InheritedVisibility>) { for inherited_visibility in &q { if inherited_visibility.get() { ``` ```rust // Before: fn my_system(q: Query<&ComputedVisibilty>) { for vis in &q { if vis.is_visible_in_view() { // After: fn my_system(q: Query<&ViewVisibility>) { for view_visibility in &q { if view_visibility.get() { ``` ```rust // Before: fn my_system(mut q: Query<&mut ComputedVisibilty>) { for vis in &mut q { vis.set_visible_in_view(); // After: fn my_system(mut q: Query<&mut ViewVisibility>) { for view_visibility in &mut q { view_visibility.set(); ``` --------- Co-authored-by: Robert Swain <robert.swain@gmail.com>	2023-09-01 13:00:18 +00:00
lelo	42e6dc8987	Refactor EventReader::iter to read (#9631) ... # Objective - The current `EventReader::iter` has been determined to cause confusion among new Bevy users. It was suggested by @JoJoJet to rename the method to better clarify its usage. - Solves #9624 ## Solution - Rename `EventReader::iter` to `EventReader::read`. - Rename `EventReader::iter_with_id` to `EventReader::read_with_id`. - Rename `ManualEventReader::iter` to `ManualEventReader::read`. - Rename `ManualEventReader::iter_with_id` to `ManualEventReader::read_with_id`. --- ## Changelog - `EventReader::iter` has been renamed to `EventReader::read`. - `EventReader::iter_with_id` has been renamed to `EventReader::read_with_id`. - `ManualEventReader::iter` has been renamed to `ManualEventReader::read`. - `ManualEventReader::iter_with_id` has been renamed to `ManualEventReader::read_with_id`. - Deprecated `EventReader::iter` - Deprecated `EventReader::iter_with_id` - Deprecated `ManualEventReader::iter` - Deprecated `ManualEventReader::iter_with_id` ## Migration Guide - Existing usages of `EventReader::iter` and `EventReader::iter_with_id` will have to be changed to `EventReader::read` and `EventReader::read_with_id` respectively. - Existing usages of `ManualEventReader::iter` and `ManualEventReader::iter_with_id` will have to be changed to `ManualEventReader::read` and `ManualEventReader::read_with_id` respectively.	2023-08-30 14:20:03 +00:00
ickshonpe	64dcaf002b	Rename Val evaluate to resolve and implement viewport variant support (#9568) ... # Objective Rename `Val`'s `evaluate` method to `resolve`. Implement `resolve` support for `Val`'s viewport variants. fixes #9535 --- ## Changelog `bevy_ui::ui_node::Val`: * Renamed the following methods and added a `viewport_size` parameter: - `evaluate` to `resolve` - `try_add_with_size` to `try_add_with_context` - `try_add_assign_with_size` to `try_add_assign_with_context` - `try_sub_with_size` to `try_sub_with_context` - `try_sub_assign_with_size` to `try_sub_assign_with_context` * Implemented `resolve` support for `Val`'s viewport coordinate types ## Migration Guide * Renamed the following `Val` methods and added a `viewport_size` parameter: - `evaluate` to `resolve` - `try_add_with_size` to `try_add_with_context` - `try_add_assign_with_size` to `try_add_assign_with_context` - `try_sub_with_size` to `try_sub_with_context` - `try_sub_assign_with_size` to `try_sub_assign_with_context`	2023-08-29 11:12:23 +00:00
Nicola Papale	9073d446dc	Do not panic on non-UI child of UI entity (#9621) ... Legitimately, bevy emits a WARN when encountering entities in UI trees without NodeBunlde components. Bevy pretty much always panics when such a thing happens, due to the update_clipping system. However, sometimes, it's perfectly legitimate to have a child without UI nodes in a UI tree. For example, as a "seed" entity that is consumed by a 3rd party plugin, which will later spawn a valid UI tree. In loading scenarios, you are pretty much guaranteed to have incomplete children. The presence of the WARN hints that bevy does not intend to panic on such occasion (otherwise the warn! would be a panic!) so I assume panic is an unintended behavior, aka a bug. ## Solution Early-return instead of panicking. I did only test that it indeed fixed the panic, not checked for UI inconsistencies. Though on a logical level, it can only have changed code that would otherwise panic. ## Alternatives Instead of early-returning on invalid entity in `update_clipping`, do not call it with invalid entity in its recursive call. --- ## Changelog - Do not panic on non-UI child of UI entity	2023-08-29 10:49:40 +00:00
ickshonpe	05b7f60ae5	UI node bundle comment fix (#9404) ... # Objective Doc comment for the `global_transform` field in `NodeBundle` says: ``` /// This field is automatically managed by the UI layout system. ``` The `GlobalTransform` component is the thing being managed, not the `global_transform` field, and the `TransformPropagate` systems do the managing, not the UI layout system.	2023-08-28 18:55:35 +00:00
ickshonpe	9f27f011c1	Remove Val's try_* arithmetic methods (#9609) ... # Objective Remove `Val`'s `try_*` arithmetic methods. fixes #9571 ## Changelog Removed these methods from `bevy_ui::ui_node::Val`: - `try_add` - `try_sub` - `try_add_assign_with_size` - `try_sub_assign_with_size` - `try_add_assign` - `try_sub_assign` - `try_add_assign_with_size` - `try_sub_assign_with_size` ## Migration Guide `Val`'s `try_*` arithmetic methods have been removed. To perform arithmetic on `Val`s deconstruct them using pattern matching.	2023-08-28 18:11:30 +00:00
ickshonpe	a2bd93aedc	Make GridPlacement's fields non-zero and add accessor functions. (#9486) ... # Objective * There is no way to read the fields of `GridPlacement` once set. * Values of `0` for `GridPlacement`'s fields are invalid but can be set. * A non-zero representation would be half the size. fixes #9474 ## Solution * Add `get_start`, `get_end` and `get_span` accessor methods. * Change`GridPlacement`'s constructor functions to panic on arguments of zero. * Use non-zero types instead of primitives for `GridPlacement`'s fields. --- ## Changelog `bevy_ui::ui_node::GridPlacement`: * Field types have been changed to `Option<NonZeroI16>` and `Option<NonZeroU16>`. This is because zero values are not valid for `GridPlacement`. Previously, Taffy interpreted these as auto variants. * Constructor functions for `GridPlacement` panic on arguments of `0`. * Added accessor functions: `get_start`, `get_end`, and `get_span`. These return the inner primitive value (if present) of the respective fields. ## Migration Guide `GridPlacement`'s constructor functions no longer accept values of `0`. Given any argument of `0` they will panic with a `GridPlacementError`.	2023-08-28 17:21:08 +00:00
Nicola Papale	afcb1fee90	Cleanup some bevy_text pipeline.rs (#9111) ... ## Objective - `bevy_text/src/pipeline.rs` had some crufty code. ## Solution Remove the cruft. - `&mut self` argument was unused by `TextPipeline::create_text_measure`, so we replace it with a constructor `TextMeasureInfo::from_text`. - We also pass a `&Text` to `from_text` since there is no reason to split the struct before passing it as argument. - from_text also checks beforehand that every Font exist in the Assets<Font>. This allows rust to skip the drop code on the Vecs we create in the method, since there is no early exit. - We also remove the scaled_fonts field on `TextMeasureInfo`. This avoids an additional allocation. We can re-use the font on `fonts` instead in `compute_size`. Building a `ScaledFont` seems fairly cheap, when looking at the ab_glyph internals. - We also implement ToSectionText on TextMeasureSection, this let us skip creating a whole new Vec each time we call compute_size. - This let us remove compute_size_from_section_text, since its only purpose was to not have to allocate the Vec we just made redundant. - Make some immutabe `Vec<T>` into `Box<[T]>` and `String` into `Box<str>` - `{min,max}_width_content_size` fields of `TextMeasureInfo` have name `width` in them, yet the contain information on both width and height. - `TextMeasureInfo::linebreak_behaviour` -> `linebreak_behavior` ## Migration Guide - The `ResMut<TextPipeline>` argument to `measure_text_system` doesn't exist anymore. If you were calling this system manually, you should remove the argument. - The `{min,max}_width_content_size` fields of `TextMeasureInfo` are renamed to `min` and `max` respectively - Other changes to `TextMeasureInfo` may also break your code if you were manually building it. Please consider using the new `TextMeasureInfo::from_text` to build one instead. - `TextPipeline::create_text_measure` has been removed in favor of `TextMeasureInfo::from_text`	2023-08-28 16:46:16 +00:00
James O'Brien	aa489eced0	Swap TransparentUi to use a stable sort (#9598) ... # Objective - Fix the `borders`, `ui` and `text_wrap_debug` examples. ## Solution - Swap `TransparentUi` to use a stable sort --- This is the smallest change to fix the examples but ideally this is fixed by setting better sort keys for the UI elements such that we can swap back to an unstable sort.	2023-08-27 20:37:17 +00:00
James O'Brien	4f1d9a6315	Reorder render sets, refactor bevy_sprite to take advantage (#9236) ... This is a continuation of this PR: #8062 # Objective - Reorder render schedule sets to allow data preparation when phase item order is known to support improved batching - Part of the batching/instancing etc plan from here: https://github.com/bevyengine/bevy/issues/89#issuecomment-1379249074 - The original idea came from @inodentry and proved to be a good one. Thanks! - Refactor `bevy_sprite` and `bevy_ui` to take advantage of the new ordering ## Solution - Move `Prepare` and `PrepareFlush` after `PhaseSortFlush` - Add a `PrepareAssets` set that runs in parallel with other systems and sets in the render schedule. - Put prepare_assets systems in the `PrepareAssets` set - If explicit dependencies are needed on Mesh or Material RenderAssets then depend on the appropriate system. - Add `ManageViews` and `ManageViewsFlush` sets between `ExtractCommands` and Queue - Move `queue_mesh*_bind_group` to the Prepare stage - Rename them to `prepare_` - Put systems that prepare resources (buffers, textures, etc.) into a `PrepareResources` set inside `Prepare` - Put the `prepare_..._bind_group` systems into a `PrepareBindGroup` set after `PrepareResources` - Move `prepare_lights` to the `ManageViews` set - `prepare_lights` creates views and this must happen before `Queue` - This system needs refactoring to stop handling all responsibilities - Gather lights, sort, and create shadow map views. Store sorted light entities in a resource - Remove `BatchedPhaseItem` - Replace `batch_range` with `batch_size` representing how many items to skip after rendering the item or to skip the item entirely if `batch_size` is 0. - `queue_sprites` has been split into `queue_sprites` for queueing phase items and `prepare_sprites` for batching after the `PhaseSort` - `PhaseItem`s are still inserted in `queue_sprites` - After sorting adjacent compatible sprite phase items are accumulated into `SpriteBatch` components on the first entity of each batch, containing a range of vertex indices. The associated `PhaseItem`'s `batch_size` is updated appropriately. - `SpriteBatch` items are then drawn skipping over the other items in the batch based on the value in `batch_size` - A very similar refactor was performed on `bevy_ui` --- ## Changelog Changed: - Reordered and reworked render app schedule sets. The main change is that data is extracted, queued, sorted, and then prepared when the order of data is known. - Refactor `bevy_sprite` and `bevy_ui` to take advantage of the reordering. ## Migration Guide - Assets such as materials and meshes should now be created in `PrepareAssets` e.g. `prepare_assets<Mesh>` - Queueing entities to `RenderPhase`s continues to be done in `Queue` e.g. `queue_sprites` - Preparing resources (textures, buffers, etc.) should now be done in `PrepareResources`, e.g. `prepare_prepass_textures`, `prepare_mesh_uniforms` - Prepare bind groups should now be done in `PrepareBindGroups` e.g. `prepare_mesh_bind_group` - Any batching or instancing can now be done in `Prepare` where the order of the phase items is known e.g. `prepare_sprites` ## Next Steps - Introduce some generic mechanism to ensure items that can be batched are grouped in the phase item order, currently you could easily have `[sprite at z 0, mesh at z 0, sprite at z 0]` preventing batching. - Investigate improved orderings for building the MeshUniform buffer - Implementing batching across the rest of bevy --------- Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>	2023-08-27 14:33:49 +00:00
Zachary Harrold	90b3ac7f3a	Added Val::ZERO Constant (#9566) ... # Objective - Fixes #9533 ## Solution * Added `Val::ZERO` as a constant which is defined as `Val::Px(0.)`. * Added manual `PartialEq` implementation for `Val` which allows any zero value to equal any other zero value. E.g., `Val::Px(0.) == Val::Percent(0.)` etc. This is technically a breaking change, as `Val::Px(0.) == Val::Percent(0.)` now equals `true` instead of `false` (as an example) * Replaced instances of `Val::Px(0.)`, `Val::Percent(0.)`, etc. with `Val::ZERO` * Fixed `bevy_ui::layout::convert::tests::test_convert_from` test to account for Taffy not equating `Points(0.)` and `Percent(0.)`. These tests now use `assert_eq!(...)` instead of `assert!(matches!(...))` which gives easier to diagnose error messages.	2023-08-26 14:00:53 +00:00
Rob Parrett	a788e31ad5	Fix CI for Rust 1.72 (#9562) ... # Objective [Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is now stable. # Notes - `let-else` formatting has arrived! - I chose to allow `explicit_iter_loop` due to https://github.com/rust-lang/rust-clippy/issues/11074. We didn't hit any of the false positives that prevent compilation, but fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for image in &mut *image_events {`. Happy to undo this if there's consensus the other way. --------- Co-authored-by: François <mockersf@gmail.com>	2023-08-25 12:34:24 +00:00
Tadeo Hepperle	f813831409	fix incorrect docs for JustifyItems and JustifySelf (#9539) ... # Objective Fixes incorrect docs in `bevy_ui` for `JustifyItems` and `JustifySelf`. ## Solution `JustifyItems` and `JustifySelf` target the main axis and not the cross axis.	2023-08-23 23:57:24 +00:00