# Objective
Fixes: https://github.com/bevyengine/bevy/issues/11549
Add a doctest example of what a custom implementation of an
`EntityMapper` would look like.
(need to wait until https://github.com/bevyengine/bevy/pull/11428 is
merged)
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
It can sometimes be useful to transform actual `Mesh` data without
needing to change the `Transform` of an entity. For example, one might
want to spawn a circle mesh facing up instead of facing Z, or to spawn a
mesh slightly offset without needing child entities.
## Solution
Add `transform_by` and `transformed_by` methods to `Mesh`. They take a
`Transform` and apply the translation, rotation, and scale to vertex
positions, and the rotation to normals and tangents.
In the `load_gltf` example, with this system:
```rust
fn transform(time: Res<Time>, mut q: Query<&mut Handle<Mesh>>, mut meshes: ResMut<Assets<Mesh>>) {
let sin = 0.0025 * time.elapsed_seconds().sin();
for mesh_handle in &mut q {
if let Some(mesh) = meshes.get_mut(mesh_handle.clone_weak()) {
let transform =
Transform::from_rotation(Quat::from_rotation_y(0.75 * time.delta_seconds()))
.with_scale(Vec3::splat(1.0 + sin));
mesh.transform_by(transform);
}
}
}
```
it looks like this:
https://github.com/bevyengine/bevy/assets/57632562/60432456-6d28-4d06-9c94-2f4148f5acd5
# Objective
Working towards finishing a part of #10572, this PR adds a ton of math
helpers and useful constructors for primitive shapes. I also tried
fixing some naming inconsistencies.
## Solution
- Add mathematical helpers like `area`, `volume`, `perimeter`,
`RegularPolygon::inradius` and so on, trying to cover all core
mathematical properties of each shape
- Add some constructors like `Rectangle::from_corners`,
`Cuboid::from_corners` and `Plane3d::from_points`
I also derived `PartialEq` for the shapes where it's trivial. Primitives
like `Line2d` and `Segment2d` are not trivial because you could argue
that they would be equal if they had an opposite direction.
All mathematical methods have tests with reference values computed by
hand or with external tools.
## Todo
- [x] Add tests to verify that the values from mathematical helpers are
correct
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
- example `animated_material` is more complex that needed to show how to
animate materials
- it makes CI crash because it uses too much memory
## Solution
- Simplify the example
# Objective
Get #11257 changes merged.
I rewrote them one by one checking each to ensure correctness. In
particular, the window rescale logic changes to accomodate mut app
access are double checked. Not all changes have been included as some of
bevy_winit has since changed, and i am not confident including them.
Namely, the `run_app_update_if_should` change.
### Notes to reviewers
Review commits individually, use the "Hide whitespaces" diff display
mode.
## Changelog
* `bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`
## Migration Guide
`bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`. This is to be more consistent with other windowing events.
Consider changing usage:
```diff
-window_moved.entity
+window_moved.window
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Closes#11490.
- Allow retrieving the current asset watch behavior from the
`AssetServer`.
## Solution
- Add the corresponding getter. (also fixes some trailing whitespace).
A corresponding helper could also be added on the `AssetPlugin` struct
(returning `self.watch_for_changes_override.unwrap_or(cfg!(feature =
"watch"))`), but it seems it isn't a current practice to have actual
methods on the plugin structs appart from the `Plugin` impl.
---
## Changelog
### Added
Added `watching_for_changes` getter on `AssetServer`.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
My motivation are to resolve some of the issues I describe in this
[PR](https://github.com/bevyengine/bevy/issues/11415):
- not being able to easily mapping entities because the current
EntityMapper requires `&mut World` access
- not being able to create my own `EntityMapper` because some components
(`Parent` or `Children`) do not provide any public way of modifying the
inner entities
This PR makes the `MapEntities` trait accept a generic type that
implements `Mapper` to perform the mapping.
This means we don't need to use `EntityMapper` to perform our mapping,
we can use any type that implements `Mapper`. Basically this change is
very similar to what `serde` does. Instead of specifying directly how to
map entities for a given type, we have 2 distinct steps:
- the user implements `MapEntities` to define how the type will be
traversed and which `Entity`s will be mapped
- the `Mapper` defines how the mapping is actually done
This is similar to the distinction between `Serialize` (`MapEntities`)
and `Serializer` (`Mapper`).
This allows networking library to map entities without having to use the
existing `EntityMapper` (which requires `&mut World` access and the use
of `world_scope()`)
## Migration Guide
- The existing `EntityMapper` (notably used to replicate `Scenes` across
different `World`s) has been renamed to `SceneEntityMapper`
- The `MapEntities` trait now works with a generic `EntityMapper`
instead of the specific struct `EntityMapper`.
Calls to `fn map_entities(&mut self, entity_mapper: &mut EntityMapper)`
need to be updated to
`fn map_entities<M: EntityMapper>(&mut self, entity_mapper: &mut M)`
- The new trait `EntityMapper` has been added to the prelude
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- `bevy_ui` fails to compile without `bevy_text` being enabled.
- Fixes#11363.
## Solution
- Add `#[cfg(feature = "bevy_text")]` to all items that require it.
I think this change is honestly a bit ugly, but I can't see any other
way around it. I considered making `bevy_text` required, but we agreed
[on
Discord](https://discord.com/channels/691052431525675048/743663673393938453/1196868117486379148)
that there were some use cases for `bevy_ui` without `bevy_text`. If you
have any ideas that decreases the amount of `#[cfg(...)]`s and
`#[allow(...)]`s, that would be greatly appreciated.
This was tested by running the following commands:
```shell
$ cargo clippy -p bevy_ui
$ cargo clippy -p bevy_ui -F bevy_text
$ cargo run -p ci
```
---
## Changelog
- Fixed `bevy_ui` not compiling without `bevy_text`.
# Objective
Fixes#8965.
#### Background
For convenience and to ensure everything is setup properly, we
automatically add certain bounds to the derived types. The current
implementation does this by taking the types from all active fields and
adding them to the where-clause of the generated impls. I believe this
method was chosen because it won't add bounds to types that are
otherwise ignored.
```rust
#[derive(Reflect)]
struct Foo<T, U: SomeTrait, V> {
t: T,
u: U::Assoc,
#[reflect(ignore)]
v: [V; 2]
}
// Generates something like:
impl<T, U: SomeTrait, V> for Foo<T, U, V>
where
// Active:
T: Reflect,
U::Assoc: Reflect,
// Ignored:
[V; 2]: Send + Sync + Any
{
// ...
}
```
The self-referential type fails because it ends up using _itself_ as a
type bound due to being one of its own active fields.
```rust
#[derive(Reflect)]
struct Foo {
foo: Vec<Foo>
}
// Foo where Vec<Foo>: Reflect -> Vec<T> where T: Reflect -> Foo where Vec<Foo>: Reflect -> ...
```
## Solution
We can't simply parse all field types for the name of our type. That
would be both complex and prone to errors and false-positives. And even
if it wasn't, what would we replace the bound with?
Instead, I opted to go for a solution that only adds the bounds to what
really needs it: the type parameters. While the bounds on concrete types
make errors a bit cleaner, they aren't strictly necessary. This means we
can change our generated where-clause to only add bounds to generic type
parameters.
Doing this, though, returns us back to the problem of over-bounding
parameters that don't need to be bounded. To solve this, I added a new
container attribute (based on
[this](https://github.com/dtolnay/syn/issues/422#issuecomment-406882925)
comment and @nicopap's
[comment](https://github.com/bevyengine/bevy/pull/9046#issuecomment-1623593780))
that allows us to pass in a custom where clause to modify what bounds
are added to these type parameters.
This allows us to do stuff like:
```rust
trait Trait {
type Assoc;
}
// We don't need `T` to be reflectable since we only care about `T::Assoc`.
#[derive(Reflect)]
#[reflect(where T::Assoc: FromReflect)]
struct Foo<T: Trait>(T::Assoc);
#[derive(TypePath)]
struct Bar;
impl Trait for Bar {
type Assoc = usize;
}
#[derive(Reflect)]
struct Baz {
a: Foo<Bar>,
}
```
> **Note**
> I also
[tried](dc139ea34c)
allowing `#[reflect(ignore)]` to be used on the type parameters
themselves, but that proved problematic since the derive macro does not
consume the attribute. This is why I went with the container attribute
approach.
### Alternatives
One alternative could possibly be to just not add reflection bounds
automatically (i.e. only add required bounds like `Send`, `Sync`, `Any`,
and `TypePath`).
The downside here is we add more friction to using reflection, which
already comes with its own set of considerations. This is a potentially
viable option, but we really need to consider whether or not the
ergonomics hit is worth it.
If we did decide to go the more manual route, we should at least
consider something like #5772 to make it easier for users to add the
right bounds (although, this could still become tricky with
`FromReflect` also being automatically derived).
### Open Questions
1. Should we go with this approach or the manual alternative?
2. ~~Should we add a `skip_params` attribute to avoid the `T: 'static`
trick?~~ ~~Decided to go with `custom_where()` as it's the simplest~~
Scratch that, went with a normal where clause
3. ~~`custom_where` bikeshedding?~~ No longer needed since we are using
a normal where clause
### TODO
- [x] Add compile-fail tests
---
## Changelog
- Fixed issue preventing recursive types from deriving `Reflect`
- Changed how where-clause bounds are generated by the `Reflect` derive
macro
- They are now only applied to the type parameters, not to all active
fields
- Added `#[reflect(where T: Trait, U::Assoc: Trait, ...)]` container
attribute
## Migration Guide
When deriving `Reflect`, generic type params that do not need the
automatic reflection bounds (such as `Reflect`) applied to them will
need to opt-out using a custom where clause like: `#[reflect(where T:
Trait, U::Assoc: Trait, ...)]`.
The attribute can define custom bounds only used by the reflection
impls. To simply opt-out all the type params, we can pass in an empty
where clause: `#[reflect(where)]`.
```rust
// BEFORE:
#[derive(Reflect)]
struct Foo<T>(#[reflect(ignore)] T);
// AFTER:
#[derive(Reflect)]
#[reflect(where)]
struct Foo<T>(#[reflect(ignore)] T);
```
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Fixes#11569
## Solution
- Add new methods to the Ext Trait
---
## Changelog
### Added
- Added new methods to the trait `AppGizmoBuilder`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Implement common traits on primitives
## Solution
- Derive PartialEq on types that were missing it.
- Derive Copy on small types that were missing it.
- Derive Serialize/Deserialize if the feature on bevy_math is enabled.
- Add a lot of cursed stuff to the bevy_reflect `impls` module.
# Objective
- I wanted this for an example, and I think it's a fundamentally handy
debugging tool (with already public fields).
## Solution
- `derive(Debug)` for `FrameCount`
# Objective
- Fixes#11453
This is a temporary fix. There is PR fixing it (#11460), but I'm not
sure if it's going to be merged before the 0.13 release.
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
# Objective
Fixes#11311
## Solution
Adds an example to the documentation for `par_iter_mut`. I didn't add
any examples to `par_iter`, because I couldn't think of a good example
and I figure users can infer that `par_iter` and `par_iter_mut` are
similar.
# Objective
It's sometimes desirable to get a `Res<T>` rather than `&T` from
`World::get_resource`.
Alternative to #9940, partly adresses #9926
## Solution
added additional methods to `World` and `UnsafeWorldCell` to retrieve a
resource wrapped in a `Res`.
- `UnsafeWorldCell::get_resource_ref`
- `World::get_resource_ref`
- `World::resource_ref`
I can change it so `World::resource_mut` returns `ResMut` instead of
`Mut` as well if that's desired, but that could also be added later in a
seperate pr.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
# Objective
#11331 move the tracy dependency, this remove the line number to avoid
keeping the link in sync
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Address junk leftover by TypeUuid removal
## Solution
- Get rid of unused deps and imports
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Resolves#11377
## Solution
- Add marker component `IsDefaultUiCamera` that will be choosen first as
the default camera.
If you want the IsDefaultUiCamera default camera to be in another
window, thats now possible.
- `IsDefaultUiCamera` is expected to be within a single Camera, if that
assertion fails, one PrimaryWindow Camera will be choosen.
---
## Changelog
### Added
- Added `IsDefaultUiCamera` marker component.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
Allow TextureAtlasBuilder in AssetLoader.
Fixes#2987
## Solution
- TextureAtlasBuilder no longer hold just AssetIds that are used to
retrieve the actual image data in `finish`, but &Image instead.
- TextureAtlasBuilder now required AssetId only optionally (and it is
only used to retrieve the index from the AssetId in TextureAtlasLayout),
## Issues
- The issue mentioned here
https://github.com/bevyengine/bevy/pull/11474#issuecomment-1904676937
now also extends to the actual atlas texture. In short: Calling
add_texture multiple times for the same texture will lead to duplicate
image data in the atlas texture and additional indices.
If you provide an AssetId we can probably do something to de-duplicate
the entries while keeping insertion order (suggestions welcome on how
exactly). But if you don't then we are out of luck (unless we can and
want to hash the image, which I do not think we want).
---
## Changelog
### Changed
- TextureAtlasBuilder `add_texture` can be called without providing an
AssetId
- TextureAtlasBuilder `finish` no longer takes Assets<Image> and no
longer returns a Handle<Image>
## Migration Guide
- For `add_texture` you need to wrap your AssetId in Some
- `finish` now returns the atlas texture image directly instead of a
handle. Provide the atlas texture to `add` on Assets<Texture> to get a
Handle<Image>
# Objective
allow automatic fixing of bad joint weights.
fix#10447
## Solution
- remove automatic normalization of vertexes with all zero joint
weights.
- add `Mesh::normalize_joint_weights` which fixes zero joint weights,
and also ensures that all weights sum to 1. this is a manual call as it
may be slow to apply to large skinned meshes, and is unnecessary if you
have control over the source assets.
note: this became a more significant problem with 0.12, as weights that
are close to, but not exactly 1 now seem to use `Vec3::ZERO` for the
unspecified weight, where previously they used the entity translation.
# Objective
Alternative to #11515.
Fixes change detection being triggered on the "image viewer image
material" every frame.
## Solution
- Split the megasystem into two separate systems: one to handle drop
events, and one to handle asset change events.
- Move the event reader iteration "outside." so that we're only doing
stuff when there are events.
- Flatten some of the more extreme nesting
- Other bits of cleanup, removing an unnecessary clone and unused
variable.
I think these systems can even run in parallel now, not that it
particularly matters.
# Objective
DXC+DX12 debug builds with an environment map have been broken since
https://github.com/bevyengine/bevy/pull/11366 merged due to an internal
compiler error in DXC. I tracked it down to a single `break` statement
and reported it upstream
(https://github.com/microsoft/DirectXShaderCompiler/issues/6183)
## Solution
Workaround the ICE by setting the for loop index variable to the max
value of the loop to avoid the `break` that's causing the ICE.
This works because it's the last thing in the for loop.
The `reflection_probes` and `pbr` examples both appear to still work
correctly.
# Objective
After #10520, I was experiencing seriously degraded performance that
ended up being due to never-drained `AssetEvent` events causing havoc
inside `extract_render_asset::<A>`. The same events being read over and
over again meant the same assets were being prepared every frame for
eternity. For what it's worth, I was noticing this on a static scene
about every 3rd or so time running my project.
* References #10520
* Fixes#11240
Why these events aren't sometimes drained between frames is beyond me
and perhaps worthy of another investigation, but the approach in this PR
effectively restores the original cached `EventReader` behavior (which
fixes it).
## Solution
I followed the [`CachedSystemState`
example](3a666cab23/crates/bevy_ecs/src/system/function_system.rs (L155))
to make sure that the `EventReader` state is cached between frames like
it used to be when it was an argument of `extract_render_asset::<A>`.
# Objective
Plugins are an incredible tool for encapsulating functionality. They are
low-key one of Bevy's best features. Combined with rust's module and
privacy system, it's a match made in heaven.
The one downside is that they can be a little too verbose to define. 90%
of all plugin definitions look something like this:
```rust
pub struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
}
```
Every so often it gets a little spicier:
```rust
pub struct MyGenericPlugin<T>(PhantomData<T>);
impl<T> Default for MyGenericPlugin<T> {
fn default() -> Self { ... }
}
impl<T> Plugin for MyGenericPlugin<T> { ... }
```
This is an annoying amount of boilerplate. Ideally, plugins should be
focused and small in scope, which means any app is going to have a *lot*
of them. Writing a plugin should be as easy as possible, and the *only*
part of this process that carries any meaning is the body of `fn build`.
## Solution
Implement `Plugin` for functions that take `&mut App` as a parameter.
The two examples above now look like this:
```rust
pub fn my_plugin(app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
pub fn my_generic_plugin<T>(app: &mut App) {
// No need for PhantomData, it just works.
}
```
Almost all plugins can be written this way, which I believe will make
bevy code much more attractive. Less boilerplate and less meaningless
indentation. More plugins with smaller scopes.
---
## Changelog
The `Plugin` trait is now implemented for all functions that take `&mut
App` as their only parameter. This is an abbreviated way of defining
plugins with less boilerplate than manually implementing the trait.
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
Fixes#11533
When `AssetPath`s are created from a string type, they are parsed into
an `AssetSource`, a `Path`, and a `Label`.
The current method of parsing has some unnecessary quirks:
- The presence of a `:` character is assumed to be the start of an asset
source indicator.
- This is not necessarily true. There are valid uses of a `:` character
in an asset path, for example an http source's port such as
`localhost:80`.
- If there are multiple instances of `://`, the last one is assumed to
be the asset source deliminator.
- This has some unexpected behavior. Even in a fully formed path, such
as `http://localhost:80`, the `:` between `localhost` and `80` is
assumed to be the start of an asset source, causing an error since it
does not form the full sequence `://`.
## Solution
Changes the `AssetPath`'s `parse_internal` method to be more permissive.
- Only the exact sequence `://` is taken to be the asset source
deliminator, and only the first one if there are multiple.
- As a consequence, it is no longer possible to detect a malformed asset
source deliminator, and so the corresponding error was removed.
# Objective
https://github.com/bevyengine/bevy/pull/5103 caused a bug where
`Sprite::rect` was ignored by the engine. (Did nothing)
## Solution
My solution changes the way how Bevy calculates the rect, based on this
table:
| `atlas_rect` | `Sprite::rect` | Result |
|--------------|----------------|------------------------------------------------------|
| `None` | `None` | `None` |
| `None` | `Some` | `Sprite::rect` |
| `Some` | `None` | `atlas_rect` |
| `Some` | `Some` | `Sprite::rect` is used, relative to `atlas_rect.min`
|
# Objective
One of a few Bevy Asset improvements I would like to make: #11216.
Currently asset processing and asset saving are handled by the same
trait, `AssetSaver`. This makes it difficult to reuse saving
implementations and impossible to have a single "universal" saver for a
given asset type.
## Solution
This PR splits off the processing portion of `AssetSaver` into
`AssetTransformer`, which is responsible for transforming assets. This
change involves adding the `LoadTransformAndSave` processor, which
utilizes the new API. The `LoadAndSave` still exists since it remains
useful in situations where no "transformation" of the asset is done,
such as when compressing assets.
## Notes:
As an aside, Bikeshedding is welcome on the names. I'm not entirely
convinced by `AssetTransformer`, which was chosen mostly because
`AssetProcessor` is taken. Additionally, `LoadTransformSave` may be
sufficient instead of `LoadTransformAndSave`.
---
## Changelog
### Added
- `AssetTransformer` which is responsible for transforming Assets.
- `LoadTransformAndSave`, a `Process` implementation.
### Changed
- Changed `AssetSaver`'s responsibilities from processing and saving to
just saving.
- Updated `asset_processing` example to use new API.
- Old asset .meta files regenerated with new processor.
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Make APIs more consistent and ergonomic by adding a `new` constructor
for `Circle` and `Sphere`.
This could be seen as a redundant "trivial constructor", but in
practise, it seems valuable to me. I have lots of cases where formatting
becomes ugly because of the lack of a constructor, like this:
```rust
Circle {
radius: self.radius(),
}
.contains_local_point(centered_pt)
```
With `new`, it'd be formatted much nicer:
```rust
Circle::new(self.radius()).contains_local_point(centered_pt)
```
Of course, this is just one example, but my circle/sphere definitions
very frequently span three or more lines when they could fit on one.
Adding `new` also increases consistency. `Ellipse` has `new` already,
and so does the mesh version of `Circle`.
## Solution
Add a `new` constructor for `Circle` and `Sphere`.
# Objective
- Fix documentation for `AssetReader::is_directory` (it is currently
exactly the same as docs for `read_directory`)
---------
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
# Objective
- Fixes#11516
## Solution
- Add Animated Material example (colors are hue-cycling smoothly
per-mesh)
Note: this example reproduces the perf issue found in #10610 pretty
consistently, with and without the changes from that PR included. Frame
time is sometimes around 4.3ms, other times around 12-14ms. Its pretty
random per run. I think this clears #10610 for merge.
# Objective
- Some passes recreate a sampler when creating a bind group to be
cached, even if the sampler is always the same.
## Solution
- Store the sampler in the corresponding pipeline resource.
# Objective
While working on #11527 I spotted that the internal field for the label
of a `Schedule` is called `name`. Using `label` seems more in line with
the other naming across Bevy.
## Solution
Renaming the field was straightforward since it's not exposed outside of
the module. This also means a changelog or migration guide isn't
necessary.
# Objective
Theres no explaination for what the compiler flags
`config_fast_builds.toml` do
## Solution
Explain what the flags in `config_fast_builds.toml` do.
# Objective
Fixes#11411
## Solution
- Added a simple example how to create and configure custom schedules
that are run by the `Main` schedule.
- Spot checked some of the API docs used, fixed `App::add_schedule` docs
that referred to a function argument that was removed by #9600.
## Open Questions
- While spot checking the docs, I noticed that the `Schedule` label is
stored in a field called `name` instead of `label`. This seems
unintuitive since the term label is used everywhere else. Should we
change that field name? It was introduced in #9600. If so, I do think
this change would be out of scope for this PR that mainly adds the
example.
# Objective
Rust analyzer kept complaining about a cyclic dependency due to
`bevy_input` having a dev-dependency on `bevy`.
`bevy_input` was also missing `bevy_reflect`'s "smol_str" feature which
it needs to compile on its own.
Fixes#10256
## Solution
Remove the dev-dependency on `bevy` from `bevy_input` since it was only
used to reduce imports for 1 test and 3 doc examples by 1 line each, as
`bevy_input` already has dependencies on everything needed for those
tests and doctests to work.
Add `bevy_reflect`'s "smol_str" feature to `bevy_input`'s dependency
list as it needs it to actually compile.
# Objective
Fixes#10414.
That issue and its comments do a great job of laying out the case for
this.
## Solution
Added an optional `spatial_scale` field to `PlaybackSettings`, which
overrides the default value set on `AudioPlugin`.
## Changelog
- `AudioPlugin::spatial_scale` has been renamed to
`default_spatial_scale`.
- `SpatialScale` is no longer a resource and is wrapped by
`DefaultSpatialScale`.
- Added an optional `spatial_scale` to `PlaybackSettings`.
## Migration Guide
`AudioPlugin::spatial_scale` has been renamed to `default_spatial_scale`
and the default spatial scale can now be overridden on individual audio
sources with `PlaybackSettings::spatial_scale`.
If you were modifying or reading `SpatialScale` at run time, use
`DefaultSpatialScale` instead.
```rust
// before
app.add_plugins(DefaultPlugins.set(AudioPlugin {
spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
// after
app.add_plugins(DefaultPlugins.set(AudioPlugin {
default_spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
```
# Objective
TypeUuid is deprecated, remove it.
## Migration Guide
Convert any uses of `#[derive(TypeUuid)]` with `#[derive(TypePath]` for
more complex uses see the relevant
[documentation](https://docs.rs/bevy/latest/bevy/prelude/trait.TypePath.html)
for more information.
---------
Co-authored-by: ebola <dev@axiomatic>
