bevy/examples/ecs/dynamic.rs

274 lines
9.8 KiB
Rust
Raw Normal View History

Forbid unsafe in most crates in the engine (#12684) # Objective Resolves #3824. `unsafe` code should be the exception, not the norm in Rust. It's obviously needed for various use cases as it's interfacing with platforms and essentially running the borrow checker at runtime in the ECS, but the touted benefits of Bevy is that we are able to heavily leverage Rust's safety, and we should be holding ourselves accountable to that by minimizing our unsafe footprint. ## Solution Deny `unsafe_code` workspace wide. Add explicit exceptions for the following crates, and forbid it in almost all of the others. * bevy_ecs - Obvious given how much unsafe is needed to achieve performant results * bevy_ptr - Works with raw pointers, even more low level than bevy_ecs. * bevy_render - due to needing to integrate with wgpu * bevy_window - due to needing to integrate with raw_window_handle * bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved into bevy_ecs instead of made publicly usable. * bevy_reflect - Required for the unsafe type casting it's doing. * bevy_transform - for the parallel transform propagation * bevy_gizmos - For the SystemParam impls it has. * bevy_assets - To support reflection. Might not be required, not 100% sure yet. * bevy_mikktspace - due to being a conversion from a C library. Pending safe rewrite. * bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading nature. Several uses of unsafe were rewritten, as they did not need to be using them: * bevy_text - a case of `Option::unchecked` could be rewritten as a normal for loop and match instead of an iterator. * bevy_color - the Pod/Zeroable implementations were replaceable with bytemuck's derive macros.
2024-03-27 03:30:08 +00:00
#![allow(unsafe_code)]
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
//! This example show how you can create components dynamically, spawn entities with those components
//! as well as query for entities with those components.
use std::{alloc::Layout, io::Write, ptr::NonNull};
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
use bevy::{
ecs::{
component::{ComponentDescriptor, ComponentId, ComponentInfo, StorageType},
query::QueryData,
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
world::FilteredEntityMut,
},
prelude::*,
ptr::{Aligned, OwningPtr},
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
utils::HashMap,
};
const PROMPT: &str = "
Commands:
comp, c Create new components
spawn, s Spawn entities
query, q Query for entities
Enter a command with no parameters for usage.";
const COMPONENT_PROMPT: &str = "
comp, c Create new components
Enter a comma separated list of type names optionally followed by a size in u64s.
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
e.g. CompA 3, CompB, CompC 2";
const ENTITY_PROMPT: &str = "
spawn, s Spawn entities
Enter a comma separated list of components optionally followed by values.
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
e.g. CompA 0 1 0, CompB, CompC 1";
const QUERY_PROMPT: &str = "
query, q Query for entities
Enter a query to fetch and update entities
Components with read or write access will be displayed with their values
Components with write access will have their fields incremented by one
Accesses: 'A' with, '&A' read, '&mut A' write
Operators: '||' or, ',' and, '?' optional
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
e.g. &A || &B, &mut C, D, ?E";
fn main() {
let mut world = World::new();
let mut lines = std::io::stdin().lines();
let mut component_names = HashMap::<String, ComponentId>::new();
let mut component_info = HashMap::<ComponentId, ComponentInfo>::new();
println!("{PROMPT}");
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
loop {
print!("\n> ");
let _ = std::io::stdout().flush();
let Some(Ok(line)) = lines.next() else {
return;
};
if line.is_empty() {
return;
};
let Some((first, rest)) = line.trim().split_once(|c: char| c.is_whitespace()) else {
match &line.chars().next() {
Some('c') => println!("{COMPONENT_PROMPT}"),
Some('s') => println!("{ENTITY_PROMPT}"),
Some('q') => println!("{QUERY_PROMPT}"),
_ => println!("{PROMPT}"),
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
}
continue;
};
match &first[0..1] {
"c" => {
rest.split(',').for_each(|component| {
let mut component = component.split_whitespace();
let Some(name) = component.next() else {
return;
};
let size = match component.next().map(str::parse) {
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
Some(Ok(size)) => size,
_ => 0,
};
// Register our new component to the world with a layout specified by it's size
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
// SAFETY: [u64] is Send + Sync
let id = world.register_component_with_descriptor(unsafe {
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
ComponentDescriptor::new_with_layout(
name.to_string(),
StorageType::Table,
Layout::array::<u64>(size).unwrap(),
None,
)
});
let Some(info) = world.components().get_info(id) else {
return;
};
component_names.insert(name.to_string(), id);
component_info.insert(id, info.clone());
println!("Component {} created with id: {:?}", name, id.index());
});
}
"s" => {
let mut to_insert_ids = Vec::new();
let mut to_insert_data = Vec::new();
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
rest.split(',').for_each(|component| {
let mut component = component.split_whitespace();
let Some(name) = component.next() else {
return;
};
// Get the id for the component with the given name
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
let Some(&id) = component_names.get(name) else {
println!("Component {name} does not exist");
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
return;
};
// Calculate the length for the array based on the layout created for this component id
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
let info = world.components().get_info(id).unwrap();
let len = info.layout().size() / size_of::<u64>();
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
let mut values: Vec<u64> = component
.take(len)
.filter_map(|value| value.parse::<u64>().ok())
.collect();
values.resize(len, 0);
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
// Collect the id and array to be inserted onto our entity
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
to_insert_ids.push(id);
to_insert_data.push(values);
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
});
let mut entity = world.spawn_empty();
// Construct an `OwningPtr` for each component in `to_insert_data`
let to_insert_ptr = to_owning_ptrs(&mut to_insert_data);
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
// SAFETY:
// - Component ids have been taken from the same world
// - Each array is created to the layout specified in the world
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
unsafe {
entity.insert_by_ids(&to_insert_ids, to_insert_ptr.into_iter());
}
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
println!("Entity spawned with id: {:?}", entity.id());
}
"q" => {
let mut builder = QueryBuilder::<FilteredEntityMut>::new(&mut world);
parse_query(rest, &mut builder, &component_names);
let mut query = builder.build();
query.iter_mut(&mut world).for_each(|filtered_entity| {
Add `EntityRefExcept` and `EntityMutExcept` world queries, in preparation for generalized animation. (#15207) This commit adds two new `WorldQuery` types: `EntityRefExcept` and `EntityMutExcept`. These types work just like `EntityRef` and `EntityMut`, but they prevent access to a statically-specified list of components. For example, `EntityMutExcept<(AnimationPlayer, Handle<AnimationGraph>)>` provides mutable access to all components except for `AnimationPlayer` and `Handle<AnimationGraph>`. These types are useful when you need to be able to process arbitrary queries while iterating over the results of another `EntityMut` query. The motivating use case is *generalized animation*, which is an upcoming feature that allows animation of any component property, not just rotation, translation, scaling, or morph weights. To implement this, we must change the current `AnyOf<(&mut Transform, &mut MorphWeights)>` to instead be `EntityMutExcept<(AnimationPlayer, Handle<AnimationGraph>)>`. It's possible to use `FilteredEntityMut` in conjunction with a dynamically-generated system instead, but `FilteredEntityMut` isn't optimized for the use case of a large number of allowed components coupled with a small set of disallowed components. No amount of optimization of `FilteredEntityMut` produced acceptable performance on the `many_foxes` benchmark. `Query<EntityMut, Without<AnimationPlayer>>` will not suffice either, as it's legal and idiomatic for an `AnimationTarget` and an `AnimationPlayer` to coexist on the same entity. An alternate proposal was to implement a somewhat-more-general `Except<Q, CL>` feature, where Q is a `WorldQuery` and CL is a `ComponentList`. I wasn't able to implement that proposal in a reasonable way, because of the fact that methods like `EntityMut::get_mut` and `EntityRef::get` are inherent methods instead of methods on `WorldQuery`, and therefore there was no way to delegate methods like `get` and `get_mut` to the inner query in a generic way. Refactoring those methods into a trait would probably be possible. However, I didn't see a use case for a hypothetical `Except` with arbitrary queries: `Query<Except<(&Transform, &Visibility), Visibility>>` would just be a complicated equivalent to `Query<&Transform>`, for instance. So, out of a desire for simplicity, I omitted a generic `Except` mechanism. I've tested the performance of generalized animation on `many_foxes` and found that, with this patch, `animate_targets` has a 7.4% slowdown over `main`. With `FilteredEntityMut` optimized to use `Arc<Access>`, the slowdown is 75.6%, due to contention on the reference count. Without `Arc<Access>`, the slowdown is even worse, over 2x. ## Testing New tests have been added that check that `EntityRefExcept` and `EntityMutExcept` allow and disallow access to components properly and that the query engine can correctly reject conflicting queries involving those types. A Tracy profile of `many_foxes` with 10,000 foxes showing generalized animation using `FilteredEntityMut` (red) vs. main (yellow) is as follows: ![Screenshot 2024-09-12 225914](https://github.com/user-attachments/assets/2993d74c-a513-4ba4-85bd-225672e7170a) A Tracy profile of `many_foxes` with 10,000 foxes showing generalized animation using this `EntityMutExcept` (yellow) vs. main (red) is as follows: ![Screenshot 2024-09-14 205831](https://github.com/user-attachments/assets/4241015e-0c5d-44ef-835b-43f78a24e604)
2024-09-17 14:53:39 +00:00
#[allow(deprecated)]
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
let terms = filtered_entity
Add `EntityRefExcept` and `EntityMutExcept` world queries, in preparation for generalized animation. (#15207) This commit adds two new `WorldQuery` types: `EntityRefExcept` and `EntityMutExcept`. These types work just like `EntityRef` and `EntityMut`, but they prevent access to a statically-specified list of components. For example, `EntityMutExcept<(AnimationPlayer, Handle<AnimationGraph>)>` provides mutable access to all components except for `AnimationPlayer` and `Handle<AnimationGraph>`. These types are useful when you need to be able to process arbitrary queries while iterating over the results of another `EntityMut` query. The motivating use case is *generalized animation*, which is an upcoming feature that allows animation of any component property, not just rotation, translation, scaling, or morph weights. To implement this, we must change the current `AnyOf<(&mut Transform, &mut MorphWeights)>` to instead be `EntityMutExcept<(AnimationPlayer, Handle<AnimationGraph>)>`. It's possible to use `FilteredEntityMut` in conjunction with a dynamically-generated system instead, but `FilteredEntityMut` isn't optimized for the use case of a large number of allowed components coupled with a small set of disallowed components. No amount of optimization of `FilteredEntityMut` produced acceptable performance on the `many_foxes` benchmark. `Query<EntityMut, Without<AnimationPlayer>>` will not suffice either, as it's legal and idiomatic for an `AnimationTarget` and an `AnimationPlayer` to coexist on the same entity. An alternate proposal was to implement a somewhat-more-general `Except<Q, CL>` feature, where Q is a `WorldQuery` and CL is a `ComponentList`. I wasn't able to implement that proposal in a reasonable way, because of the fact that methods like `EntityMut::get_mut` and `EntityRef::get` are inherent methods instead of methods on `WorldQuery`, and therefore there was no way to delegate methods like `get` and `get_mut` to the inner query in a generic way. Refactoring those methods into a trait would probably be possible. However, I didn't see a use case for a hypothetical `Except` with arbitrary queries: `Query<Except<(&Transform, &Visibility), Visibility>>` would just be a complicated equivalent to `Query<&Transform>`, for instance. So, out of a desire for simplicity, I omitted a generic `Except` mechanism. I've tested the performance of generalized animation on `many_foxes` and found that, with this patch, `animate_targets` has a 7.4% slowdown over `main`. With `FilteredEntityMut` optimized to use `Arc<Access>`, the slowdown is 75.6%, due to contention on the reference count. Without `Arc<Access>`, the slowdown is even worse, over 2x. ## Testing New tests have been added that check that `EntityRefExcept` and `EntityMutExcept` allow and disallow access to components properly and that the query engine can correctly reject conflicting queries involving those types. A Tracy profile of `many_foxes` with 10,000 foxes showing generalized animation using `FilteredEntityMut` (red) vs. main (yellow) is as follows: ![Screenshot 2024-09-12 225914](https://github.com/user-attachments/assets/2993d74c-a513-4ba4-85bd-225672e7170a) A Tracy profile of `many_foxes` with 10,000 foxes showing generalized animation using this `EntityMutExcept` (yellow) vs. main (red) is as follows: ![Screenshot 2024-09-14 205831](https://github.com/user-attachments/assets/4241015e-0c5d-44ef-835b-43f78a24e604)
2024-09-17 14:53:39 +00:00
.access()
.component_reads_and_writes()
.0
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
.map(|id| {
let ptr = filtered_entity.get_by_id(id).unwrap();
let info = component_info.get(&id).unwrap();
let len = info.layout().size() / size_of::<u64>();
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
// SAFETY:
// - All components are created with layout [u64]
// - len is calculated from the component descriptor
let data = unsafe {
std::slice::from_raw_parts_mut(
ptr.assert_unique().as_ptr().cast::<u64>(),
len,
)
};
// If we have write access, increment each value once
if filtered_entity.access().has_component_write(id) {
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
data.iter_mut().for_each(|data| {
*data += 1;
});
}
format!("{}: {:?}", info.name(), data[0..len].to_vec())
})
.collect::<Vec<_>>()
.join(", ");
println!("{:?}: {}", filtered_entity.id(), terms);
});
}
_ => continue,
}
}
}
// Constructs `OwningPtr` for each item in `components`
// By sharing the lifetime of `components` with the resulting ptrs we ensure we don't drop the data before use
fn to_owning_ptrs(components: &mut [Vec<u64>]) -> Vec<OwningPtr<Aligned>> {
components
.iter_mut()
.map(|data| {
let ptr = data.as_mut_ptr();
// SAFETY:
// - Pointers are guaranteed to be non-null
// - Memory pointed to won't be dropped until `components` is dropped
unsafe {
let non_null = NonNull::new_unchecked(ptr.cast());
OwningPtr::new(non_null)
}
})
.collect()
}
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
fn parse_term<Q: QueryData>(
str: &str,
builder: &mut QueryBuilder<Q>,
components: &HashMap<String, ComponentId>,
) {
let mut matched = false;
let str = str.trim();
match str.chars().next() {
// Optional term
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
Some('?') => {
builder.optional(|b| parse_term(&str[1..], b, components));
matched = true;
}
// Reference term
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
Some('&') => {
let mut parts = str.split_whitespace();
let first = parts.next().unwrap();
if first == "&mut" {
if let Some(str) = parts.next() {
if let Some(&id) = components.get(str) {
builder.mut_id(id);
matched = true;
}
};
} else if let Some(&id) = components.get(&first[1..]) {
builder.ref_id(id);
matched = true;
}
}
// With term
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
Some(_) => {
if let Some(&id) = components.get(str) {
builder.with_id(id);
matched = true;
}
}
None => {}
};
if !matched {
println!("Unable to find component: {str}");
Dynamic queries and builder API (#9774) # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
2024-01-16 19:16:49 +00:00
}
}
fn parse_query<Q: QueryData>(
str: &str,
builder: &mut QueryBuilder<Q>,
components: &HashMap<String, ComponentId>,
) {
let str = str.split(',');
str.for_each(|term| {
let sub_terms: Vec<_> = term.split("||").collect();
if sub_terms.len() == 1 {
parse_term(sub_terms[0], builder, components);
} else {
builder.or(|b| {
sub_terms
.iter()
.for_each(|term| parse_term(term, b, components));
});
}
});
}