bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
use std::any::{Any, TypeId};
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
use std::fmt::{Debug, Formatter};
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
use std::hash::{Hash, Hasher};
|
2020-11-28 00:39:59 +00:00
|
|
|
|
2023-06-05 20:31:20 +00:00
|
|
|
use bevy_reflect_derive::impl_type_path;
|
|
|
|
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
use crate::utility::reflect_hasher;
|
2023-06-05 20:31:20 +00:00
|
|
|
use crate::{
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
self as bevy_reflect, ApplyError, FromReflect, MaybeTyped, PartialReflect, Reflect,
|
|
|
|
ReflectKind, ReflectMut, ReflectOwned, ReflectRef, TypeInfo, TypePath, TypePathTable,
|
2023-06-05 20:31:20 +00:00
|
|
|
};
|
2020-11-28 00:39:59 +00:00
|
|
|
|
2023-02-18 20:42:01 +00:00
|
|
|
/// A trait used to power [list-like] operations via [reflection].
|
2022-05-13 01:13:30 +00:00
|
|
|
///
|
2023-02-18 20:42:01 +00:00
|
|
|
/// This corresponds to types, like [`Vec`], which contain an ordered sequence
|
|
|
|
/// of elements that implement [`Reflect`].
|
|
|
|
///
|
|
|
|
/// Unlike the [`Array`](crate::Array) trait, implementors of this trait are not expected to
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
/// maintain a constant length.
|
|
|
|
/// Methods like [insertion](List::insert) and [removal](List::remove) explicitly allow for their
|
|
|
|
/// internal size to change.
|
2022-12-07 23:10:25 +00:00
|
|
|
///
|
2023-01-09 19:47:07 +00:00
|
|
|
/// [`push`](List::push) and [`pop`](List::pop) have default implementations,
|
2023-02-18 20:42:01 +00:00
|
|
|
/// however it will generally be more performant to implement them manually
|
|
|
|
/// as the default implementation uses a very naive approach to find the correct position.
|
|
|
|
///
|
|
|
|
/// This trait expects its elements to be ordered linearly from front to back.
|
|
|
|
/// The _front_ element starts at index 0 with the _back_ element ending at the largest index.
|
|
|
|
/// This contract above should be upheld by any manual implementors.
|
|
|
|
///
|
|
|
|
/// Due to the [type-erasing] nature of the reflection API as a whole,
|
|
|
|
/// this trait does not make any guarantees that the implementor's elements
|
2023-07-10 00:11:51 +00:00
|
|
|
/// are homogeneous (i.e. all the same type).
|
2023-02-18 20:42:01 +00:00
|
|
|
///
|
|
|
|
/// # Example
|
|
|
|
///
|
|
|
|
/// ```
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
/// use bevy_reflect::{PartialReflect, Reflect, List};
|
2023-02-18 20:42:01 +00:00
|
|
|
///
|
|
|
|
/// let foo: &mut dyn List = &mut vec![123_u32, 456_u32, 789_u32];
|
|
|
|
/// assert_eq!(foo.len(), 3);
|
|
|
|
///
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
/// let last_field: Box<dyn PartialReflect> = foo.pop().unwrap();
|
|
|
|
/// assert_eq!(last_field.try_downcast_ref::<u32>(), Some(&789));
|
2023-02-18 20:42:01 +00:00
|
|
|
/// ```
|
|
|
|
///
|
|
|
|
/// [list-like]: https://doc.rust-lang.org/book/ch08-01-vectors.html
|
|
|
|
/// [reflection]: crate
|
|
|
|
/// [type-erasing]: https://doc.rust-lang.org/book/ch17-02-trait-objects.html
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub trait List: PartialReflect {
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
/// Returns a reference to the element at `index`, or `None` if out of bounds.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn get(&self, index: usize) -> Option<&dyn PartialReflect>;
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
|
|
|
|
/// Returns a mutable reference to the element at `index`, or `None` if out of bounds.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn get_mut(&mut self, index: usize) -> Option<&mut dyn PartialReflect>;
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
|
2023-01-09 19:47:07 +00:00
|
|
|
/// Inserts an element at position `index` within the list,
|
|
|
|
/// shifting all elements after it towards the back of the list.
|
|
|
|
///
|
|
|
|
/// # Panics
|
|
|
|
/// Panics if `index > len`.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn insert(&mut self, index: usize, element: Box<dyn PartialReflect>);
|
2023-01-09 19:47:07 +00:00
|
|
|
|
|
|
|
/// Removes and returns the element at position `index` within the list,
|
|
|
|
/// shifting all elements before it towards the front of the list.
|
|
|
|
///
|
|
|
|
/// # Panics
|
|
|
|
/// Panics if `index` is out of bounds.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn remove(&mut self, index: usize) -> Box<dyn PartialReflect>;
|
2023-01-09 19:47:07 +00:00
|
|
|
|
2022-12-07 23:10:25 +00:00
|
|
|
/// Appends an element to the _back_ of the list.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn push(&mut self, value: Box<dyn PartialReflect>) {
|
2023-01-09 19:47:07 +00:00
|
|
|
self.insert(self.len(), value);
|
|
|
|
}
|
2022-01-14 19:09:44 +00:00
|
|
|
|
2022-12-07 23:10:25 +00:00
|
|
|
/// Removes the _back_ element from the list and returns it, or [`None`] if it is empty.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn pop(&mut self) -> Option<Box<dyn PartialReflect>> {
|
2023-01-09 19:47:07 +00:00
|
|
|
if self.is_empty() {
|
|
|
|
None
|
|
|
|
} else {
|
|
|
|
Some(self.remove(self.len() - 1))
|
|
|
|
}
|
|
|
|
}
|
2022-08-30 21:06:32 +00:00
|
|
|
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
/// Returns the number of elements in the list.
|
|
|
|
fn len(&self) -> usize;
|
|
|
|
|
|
|
|
/// Returns `true` if the collection contains no elements.
|
|
|
|
fn is_empty(&self) -> bool {
|
|
|
|
self.len() == 0
|
|
|
|
}
|
|
|
|
|
|
|
|
/// Returns an iterator over the list.
|
|
|
|
fn iter(&self) -> ListIter;
|
|
|
|
|
|
|
|
/// Drain the elements of this list to get a vector of owned values.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn drain(self: Box<Self>) -> Vec<Box<dyn PartialReflect>>;
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// Clones the list, producing a [`DynamicList`].
|
2020-11-28 00:39:59 +00:00
|
|
|
fn clone_dynamic(&self) -> DynamicList {
|
|
|
|
DynamicList {
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
represented_type: self.get_represented_type_info(),
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
values: self.iter().map(PartialReflect::clone_value).collect(),
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
/// A container for compile-time list info.
|
|
|
|
#[derive(Clone, Debug)]
|
|
|
|
pub struct ListInfo {
|
2023-10-09 19:33:03 +00:00
|
|
|
type_path: TypePathTable,
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
type_id: TypeId,
|
bevy_reflect: Nested `TypeInfo` getters (#13321)
# Objective
Right now, `TypeInfo` can be accessed directly from a type using either
`Typed::type_info` or `Reflect::get_represented_type_info`.
However, once that `TypeInfo` is accessed, any nested types must be
accessed via the `TypeRegistry`.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let registry = TypeRegistry::default();
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = registry.get_type_info(field.type_id()).unwrap();
assert!(field_info.is::<usize>());;
```
## Solution
Enable nested types within a `TypeInfo` to be retrieved directly.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = field.type_info().unwrap();
assert!(field_info.is::<usize>());;
```
The particular implementation was chosen for two reasons.
Firstly, we can't just store `TypeInfo` inside another `TypeInfo`
directly. This is because some types are recursive and would result in a
deadlock when trying to create the `TypeInfo` (i.e. it has to create the
`TypeInfo` before it can use it, but it also needs the `TypeInfo` before
it can create it). Therefore, we must instead store the function so it
can be retrieved lazily.
I had considered also using a `OnceLock` or something to lazily cache
the info, but I figured we can look into optimizations later. The API
should remain the same with or without the `OnceLock`.
Secondly, a new wrapper trait had to be introduced: `MaybeTyped`. Like
`RegisterForReflection`, this trait is `#[doc(hidden)]` and only exists
so that we can properly handle dynamic type fields without requiring
them to implement `Typed`. We don't want dynamic types to implement
`Typed` due to the fact that it would make the return type
`Option<&'static TypeInfo>` for all types even though only the dynamic
types ever need to return `None` (see #6971 for details).
Users should never have to interact with this trait as it has a blanket
impl for all `Typed` types. And `Typed` is automatically implemented
when deriving `Reflect` (as it is required).
The one downside is we do need to return `Option<&'static TypeInfo>`
from all these new methods so that we can handle the dynamic cases. If
we didn't have to, we'd be able to get rid of the `Option` entirely. But
I think that's an okay tradeoff for this one part of the API, and keeps
the other APIs intact.
## Testing
This PR contains tests to verify everything works as expected. You can
test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Public Changes
- Added `ArrayInfo::item_info` method
- Added `NamedField::type_info` method
- Added `UnnamedField::type_info` method
- Added `ListInfo::item_info` method
- Added `MapInfo::key_info` method
- Added `MapInfo::value_info` method
- All active fields now have a `Typed` bound (remember that this is
automatically satisfied for all types that derive `Reflect`)
### Internal Changes
- Added `MaybeTyped` trait
## Migration Guide
All active fields for reflected types (including lists, maps, tuples,
etc.), must implement `Typed`. For the majority of users this won't have
any visible impact.
However, users implementing `Reflect` manually may need to update their
types to implement `Typed` if they weren't already.
Additionally, custom dynamic types will need to implement the new hidden
`MaybeTyped` trait.
2024-07-15 00:40:07 +00:00
|
|
|
item_info: fn() -> Option<&'static TypeInfo>,
|
2023-10-09 19:33:03 +00:00
|
|
|
item_type_path: TypePathTable,
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
item_type_id: TypeId,
|
2022-10-18 13:49:57 +00:00
|
|
|
#[cfg(feature = "documentation")]
|
|
|
|
docs: Option<&'static str>,
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
impl ListInfo {
|
|
|
|
/// Create a new [`ListInfo`].
|
bevy_reflect: Nested `TypeInfo` getters (#13321)
# Objective
Right now, `TypeInfo` can be accessed directly from a type using either
`Typed::type_info` or `Reflect::get_represented_type_info`.
However, once that `TypeInfo` is accessed, any nested types must be
accessed via the `TypeRegistry`.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let registry = TypeRegistry::default();
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = registry.get_type_info(field.type_id()).unwrap();
assert!(field_info.is::<usize>());;
```
## Solution
Enable nested types within a `TypeInfo` to be retrieved directly.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = field.type_info().unwrap();
assert!(field_info.is::<usize>());;
```
The particular implementation was chosen for two reasons.
Firstly, we can't just store `TypeInfo` inside another `TypeInfo`
directly. This is because some types are recursive and would result in a
deadlock when trying to create the `TypeInfo` (i.e. it has to create the
`TypeInfo` before it can use it, but it also needs the `TypeInfo` before
it can create it). Therefore, we must instead store the function so it
can be retrieved lazily.
I had considered also using a `OnceLock` or something to lazily cache
the info, but I figured we can look into optimizations later. The API
should remain the same with or without the `OnceLock`.
Secondly, a new wrapper trait had to be introduced: `MaybeTyped`. Like
`RegisterForReflection`, this trait is `#[doc(hidden)]` and only exists
so that we can properly handle dynamic type fields without requiring
them to implement `Typed`. We don't want dynamic types to implement
`Typed` due to the fact that it would make the return type
`Option<&'static TypeInfo>` for all types even though only the dynamic
types ever need to return `None` (see #6971 for details).
Users should never have to interact with this trait as it has a blanket
impl for all `Typed` types. And `Typed` is automatically implemented
when deriving `Reflect` (as it is required).
The one downside is we do need to return `Option<&'static TypeInfo>`
from all these new methods so that we can handle the dynamic cases. If
we didn't have to, we'd be able to get rid of the `Option` entirely. But
I think that's an okay tradeoff for this one part of the API, and keeps
the other APIs intact.
## Testing
This PR contains tests to verify everything works as expected. You can
test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Public Changes
- Added `ArrayInfo::item_info` method
- Added `NamedField::type_info` method
- Added `UnnamedField::type_info` method
- Added `ListInfo::item_info` method
- Added `MapInfo::key_info` method
- Added `MapInfo::value_info` method
- All active fields now have a `Typed` bound (remember that this is
automatically satisfied for all types that derive `Reflect`)
### Internal Changes
- Added `MaybeTyped` trait
## Migration Guide
All active fields for reflected types (including lists, maps, tuples,
etc.), must implement `Typed`. For the majority of users this won't have
any visible impact.
However, users implementing `Reflect` manually may need to update their
types to implement `Typed` if they weren't already.
Additionally, custom dynamic types will need to implement the new hidden
`MaybeTyped` trait.
2024-07-15 00:40:07 +00:00
|
|
|
pub fn new<TList: List + TypePath, TItem: FromReflect + MaybeTyped + TypePath>() -> Self {
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
Self {
|
2023-10-09 19:33:03 +00:00
|
|
|
type_path: TypePathTable::of::<TList>(),
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
type_id: TypeId::of::<TList>(),
|
bevy_reflect: Nested `TypeInfo` getters (#13321)
# Objective
Right now, `TypeInfo` can be accessed directly from a type using either
`Typed::type_info` or `Reflect::get_represented_type_info`.
However, once that `TypeInfo` is accessed, any nested types must be
accessed via the `TypeRegistry`.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let registry = TypeRegistry::default();
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = registry.get_type_info(field.type_id()).unwrap();
assert!(field_info.is::<usize>());;
```
## Solution
Enable nested types within a `TypeInfo` to be retrieved directly.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = field.type_info().unwrap();
assert!(field_info.is::<usize>());;
```
The particular implementation was chosen for two reasons.
Firstly, we can't just store `TypeInfo` inside another `TypeInfo`
directly. This is because some types are recursive and would result in a
deadlock when trying to create the `TypeInfo` (i.e. it has to create the
`TypeInfo` before it can use it, but it also needs the `TypeInfo` before
it can create it). Therefore, we must instead store the function so it
can be retrieved lazily.
I had considered also using a `OnceLock` or something to lazily cache
the info, but I figured we can look into optimizations later. The API
should remain the same with or without the `OnceLock`.
Secondly, a new wrapper trait had to be introduced: `MaybeTyped`. Like
`RegisterForReflection`, this trait is `#[doc(hidden)]` and only exists
so that we can properly handle dynamic type fields without requiring
them to implement `Typed`. We don't want dynamic types to implement
`Typed` due to the fact that it would make the return type
`Option<&'static TypeInfo>` for all types even though only the dynamic
types ever need to return `None` (see #6971 for details).
Users should never have to interact with this trait as it has a blanket
impl for all `Typed` types. And `Typed` is automatically implemented
when deriving `Reflect` (as it is required).
The one downside is we do need to return `Option<&'static TypeInfo>`
from all these new methods so that we can handle the dynamic cases. If
we didn't have to, we'd be able to get rid of the `Option` entirely. But
I think that's an okay tradeoff for this one part of the API, and keeps
the other APIs intact.
## Testing
This PR contains tests to verify everything works as expected. You can
test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Public Changes
- Added `ArrayInfo::item_info` method
- Added `NamedField::type_info` method
- Added `UnnamedField::type_info` method
- Added `ListInfo::item_info` method
- Added `MapInfo::key_info` method
- Added `MapInfo::value_info` method
- All active fields now have a `Typed` bound (remember that this is
automatically satisfied for all types that derive `Reflect`)
### Internal Changes
- Added `MaybeTyped` trait
## Migration Guide
All active fields for reflected types (including lists, maps, tuples,
etc.), must implement `Typed`. For the majority of users this won't have
any visible impact.
However, users implementing `Reflect` manually may need to update their
types to implement `Typed` if they weren't already.
Additionally, custom dynamic types will need to implement the new hidden
`MaybeTyped` trait.
2024-07-15 00:40:07 +00:00
|
|
|
item_info: TItem::maybe_type_info,
|
2023-10-09 19:33:03 +00:00
|
|
|
item_type_path: TypePathTable::of::<TItem>(),
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
item_type_id: TypeId::of::<TItem>(),
|
2022-10-18 13:49:57 +00:00
|
|
|
#[cfg(feature = "documentation")]
|
|
|
|
docs: None,
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-10-18 13:49:57 +00:00
|
|
|
/// Sets the docstring for this list.
|
|
|
|
#[cfg(feature = "documentation")]
|
|
|
|
pub fn with_docs(self, docs: Option<&'static str>) -> Self {
|
|
|
|
Self { docs, ..self }
|
|
|
|
}
|
|
|
|
|
2023-10-09 19:33:03 +00:00
|
|
|
/// A representation of the type path of the list.
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
///
|
2023-10-09 19:33:03 +00:00
|
|
|
/// Provides dynamic access to all methods on [`TypePath`].
|
|
|
|
pub fn type_path_table(&self) -> &TypePathTable {
|
|
|
|
&self.type_path
|
|
|
|
}
|
|
|
|
|
|
|
|
/// The [stable, full type path] of the list.
|
|
|
|
///
|
|
|
|
/// Use [`type_path_table`] if you need access to the other methods on [`TypePath`].
|
|
|
|
///
|
|
|
|
/// [stable, full type path]: TypePath
|
|
|
|
/// [`type_path_table`]: Self::type_path_table
|
|
|
|
pub fn type_path(&self) -> &'static str {
|
|
|
|
self.type_path_table().path()
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/// The [`TypeId`] of the list.
|
|
|
|
pub fn type_id(&self) -> TypeId {
|
|
|
|
self.type_id
|
|
|
|
}
|
|
|
|
|
|
|
|
/// Check if the given type matches the list type.
|
|
|
|
pub fn is<T: Any>(&self) -> bool {
|
|
|
|
TypeId::of::<T>() == self.type_id
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Nested `TypeInfo` getters (#13321)
# Objective
Right now, `TypeInfo` can be accessed directly from a type using either
`Typed::type_info` or `Reflect::get_represented_type_info`.
However, once that `TypeInfo` is accessed, any nested types must be
accessed via the `TypeRegistry`.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let registry = TypeRegistry::default();
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = registry.get_type_info(field.type_id()).unwrap();
assert!(field_info.is::<usize>());;
```
## Solution
Enable nested types within a `TypeInfo` to be retrieved directly.
```rust
#[derive(Reflect)]
struct Foo {
bar: usize
}
let TypeInfo::Struct(type_info) = Foo::type_info() else {
panic!("expected struct info");
};
let field = type_info.field("bar").unwrap();
let field_info = field.type_info().unwrap();
assert!(field_info.is::<usize>());;
```
The particular implementation was chosen for two reasons.
Firstly, we can't just store `TypeInfo` inside another `TypeInfo`
directly. This is because some types are recursive and would result in a
deadlock when trying to create the `TypeInfo` (i.e. it has to create the
`TypeInfo` before it can use it, but it also needs the `TypeInfo` before
it can create it). Therefore, we must instead store the function so it
can be retrieved lazily.
I had considered also using a `OnceLock` or something to lazily cache
the info, but I figured we can look into optimizations later. The API
should remain the same with or without the `OnceLock`.
Secondly, a new wrapper trait had to be introduced: `MaybeTyped`. Like
`RegisterForReflection`, this trait is `#[doc(hidden)]` and only exists
so that we can properly handle dynamic type fields without requiring
them to implement `Typed`. We don't want dynamic types to implement
`Typed` due to the fact that it would make the return type
`Option<&'static TypeInfo>` for all types even though only the dynamic
types ever need to return `None` (see #6971 for details).
Users should never have to interact with this trait as it has a blanket
impl for all `Typed` types. And `Typed` is automatically implemented
when deriving `Reflect` (as it is required).
The one downside is we do need to return `Option<&'static TypeInfo>`
from all these new methods so that we can handle the dynamic cases. If
we didn't have to, we'd be able to get rid of the `Option` entirely. But
I think that's an okay tradeoff for this one part of the API, and keeps
the other APIs intact.
## Testing
This PR contains tests to verify everything works as expected. You can
test locally by running:
```
cargo test --package bevy_reflect
```
---
## Changelog
### Public Changes
- Added `ArrayInfo::item_info` method
- Added `NamedField::type_info` method
- Added `UnnamedField::type_info` method
- Added `ListInfo::item_info` method
- Added `MapInfo::key_info` method
- Added `MapInfo::value_info` method
- All active fields now have a `Typed` bound (remember that this is
automatically satisfied for all types that derive `Reflect`)
### Internal Changes
- Added `MaybeTyped` trait
## Migration Guide
All active fields for reflected types (including lists, maps, tuples,
etc.), must implement `Typed`. For the majority of users this won't have
any visible impact.
However, users implementing `Reflect` manually may need to update their
types to implement `Typed` if they weren't already.
Additionally, custom dynamic types will need to implement the new hidden
`MaybeTyped` trait.
2024-07-15 00:40:07 +00:00
|
|
|
/// The [`TypeInfo`] of the list item.
|
|
|
|
///
|
|
|
|
/// Returns `None` if the list item does not contain static type information,
|
|
|
|
/// such as for dynamic types.
|
|
|
|
pub fn item_info(&self) -> Option<&'static TypeInfo> {
|
|
|
|
(self.item_info)()
|
|
|
|
}
|
|
|
|
|
2023-10-09 19:33:03 +00:00
|
|
|
/// A representation of the type path of the list item.
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
///
|
2023-10-09 19:33:03 +00:00
|
|
|
/// Provides dynamic access to all methods on [`TypePath`].
|
|
|
|
pub fn item_type_path_table(&self) -> &TypePathTable {
|
|
|
|
&self.item_type_path
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/// The [`TypeId`] of the list item.
|
|
|
|
pub fn item_type_id(&self) -> TypeId {
|
|
|
|
self.item_type_id
|
|
|
|
}
|
|
|
|
|
|
|
|
/// Check if the given type matches the list item type.
|
|
|
|
pub fn item_is<T: Any>(&self) -> bool {
|
|
|
|
TypeId::of::<T>() == self.item_type_id
|
|
|
|
}
|
2022-10-18 13:49:57 +00:00
|
|
|
|
|
|
|
/// The docstring of this list, if any.
|
|
|
|
#[cfg(feature = "documentation")]
|
|
|
|
pub fn docs(&self) -> Option<&'static str> {
|
|
|
|
self.docs
|
|
|
|
}
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// A list of reflected values.
|
2020-11-28 00:39:59 +00:00
|
|
|
#[derive(Default)]
|
|
|
|
pub struct DynamicList {
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
represented_type: Option<&'static TypeInfo>,
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
values: Vec<Box<dyn PartialReflect>>,
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
impl DynamicList {
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
/// Sets the [type] to be represented by this `DynamicList`.
|
|
|
|
/// # Panics
|
2022-01-14 19:09:44 +00:00
|
|
|
///
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
/// Panics if the given [type] is not a [`TypeInfo::List`].
|
2022-01-14 19:09:44 +00:00
|
|
|
///
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
/// [type]: TypeInfo
|
|
|
|
pub fn set_represented_type(&mut self, represented_type: Option<&'static TypeInfo>) {
|
|
|
|
if let Some(represented_type) = represented_type {
|
|
|
|
assert!(
|
|
|
|
matches!(represented_type, TypeInfo::List(_)),
|
|
|
|
"expected TypeInfo::List but received: {:?}",
|
|
|
|
represented_type
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
self.represented_type = represented_type;
|
2021-02-02 21:57:26 +00:00
|
|
|
}
|
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// Appends a typed value to the list.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub fn push<T: PartialReflect>(&mut self, value: T) {
|
2020-11-28 00:39:59 +00:00
|
|
|
self.values.push(Box::new(value));
|
|
|
|
}
|
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// Appends a [`Reflect`] trait object to the list.
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub fn push_box(&mut self, value: Box<dyn PartialReflect>) {
|
2020-11-28 00:39:59 +00:00
|
|
|
self.values.push(value);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
impl List for DynamicList {
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn get(&self, index: usize) -> Option<&dyn PartialReflect> {
|
2020-11-28 00:39:59 +00:00
|
|
|
self.values.get(index).map(|value| &**value)
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn get_mut(&mut self, index: usize) -> Option<&mut dyn PartialReflect> {
|
2020-11-28 00:39:59 +00:00
|
|
|
self.values.get_mut(index).map(|value| &mut **value)
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn insert(&mut self, index: usize, element: Box<dyn PartialReflect>) {
|
2023-01-09 19:47:07 +00:00
|
|
|
self.values.insert(index, element);
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn remove(&mut self, index: usize) -> Box<dyn PartialReflect> {
|
2023-01-09 19:47:07 +00:00
|
|
|
self.values.remove(index)
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn push(&mut self, value: Box<dyn PartialReflect>) {
|
2020-11-28 00:39:59 +00:00
|
|
|
DynamicList::push_box(self, value);
|
|
|
|
}
|
2022-05-13 01:13:30 +00:00
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn pop(&mut self) -> Option<Box<dyn PartialReflect>> {
|
2022-08-30 21:06:32 +00:00
|
|
|
self.values.pop()
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
fn len(&self) -> usize {
|
|
|
|
self.values.len()
|
|
|
|
}
|
|
|
|
|
|
|
|
fn iter(&self) -> ListIter {
|
|
|
|
ListIter::new(self)
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn drain(self: Box<Self>) -> Vec<Box<dyn PartialReflect>> {
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
self.values
|
|
|
|
}
|
|
|
|
|
2022-05-13 01:13:30 +00:00
|
|
|
fn clone_dynamic(&self) -> DynamicList {
|
|
|
|
DynamicList {
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
represented_type: self.represented_type,
|
2022-05-13 01:13:30 +00:00
|
|
|
values: self
|
|
|
|
.values
|
|
|
|
.iter()
|
|
|
|
.map(|value| value.clone_value())
|
|
|
|
.collect(),
|
|
|
|
}
|
|
|
|
}
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
impl PartialReflect for DynamicList {
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
#[inline]
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
fn get_represented_type_info(&self) -> Option<&'static TypeInfo> {
|
|
|
|
self.represented_type
|
bevy_reflect: Add statically available type info for reflected types (#4042)
# Objective
> Resolves #4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField::new::<T>()];
let info = TupleStructInfo::new::<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e7736a6f8252e10e543e52722107649d3f) and main (c309acd4322b1c3b2089e247a2d28b938eb7b56d).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
2022-06-09 21:18:15 +00:00
|
|
|
}
|
|
|
|
|
2020-11-28 00:39:59 +00:00
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn into_partial_reflect(self: Box<Self>) -> Box<dyn PartialReflect> {
|
2020-11-28 00:39:59 +00:00
|
|
|
self
|
|
|
|
}
|
|
|
|
|
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn as_partial_reflect(&self) -> &dyn PartialReflect {
|
Make `Reflect` safe to implement (#5010)
# Objective
Currently, `Reflect` is unsafe to implement because of a contract in which `any` and `any_mut` must return `self`, or `downcast` will cause UB. This PR makes `Reflect` safe, makes `downcast` not use unsafe, and eliminates this contract.
## Solution
This PR adds a method to `Reflect`, `any`. It also renames the old `any` to `as_any`.
`any` now takes a `Box<Self>` and returns a `Box<dyn Any>`.
---
## Changelog
### Added:
- `any()` method
- `represents()` method
### Changed:
- `Reflect` is now a safe trait
- `downcast()` is now safe
- The old `any` is now called `as_any`, and `any_mut` is now `as_mut_any`
## Migration Guide
- Reflect derives should not have to change anything
- Manual reflect impls will need to remove the `unsafe` keyword, add `any()` implementations, and rename the old `any` and `any_mut` to `as_any` and `as_mut_any`.
- Calls to `any`/`any_mut` must be changed to `as_any`/`as_mut_any`
## Points of discussion:
- Should renaming `any` be avoided and instead name the new method `any_box`?
- ~~Could there be a performance regression from avoiding the unsafe? I doubt it, but this change does seem to introduce redundant checks.~~
- ~~Could/should `is` and `type_id()` be implemented differently? For example, moving `is` onto `Reflect` as an `fn(&self, TypeId) -> bool`~~
Co-authored-by: PROMETHIA-27 <42193387+PROMETHIA-27@users.noreply.github.com>
2022-06-27 16:52:25 +00:00
|
|
|
self
|
|
|
|
}
|
|
|
|
|
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn as_partial_reflect_mut(&mut self) -> &mut dyn PartialReflect {
|
2020-11-28 00:39:59 +00:00
|
|
|
self
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn try_into_reflect(self: Box<Self>) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>> {
|
|
|
|
Err(self)
|
2022-11-07 02:11:16 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn try_as_reflect(&self) -> Option<&dyn Reflect> {
|
|
|
|
None
|
2022-04-25 13:54:48 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn try_as_reflect_mut(&mut self) -> Option<&mut dyn Reflect> {
|
|
|
|
None
|
2022-04-25 13:54:48 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn apply(&mut self, value: &dyn PartialReflect) {
|
2020-11-28 00:39:59 +00:00
|
|
|
list_apply(self, value);
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn try_apply(&mut self, value: &dyn PartialReflect) -> Result<(), ApplyError> {
|
2024-05-08 14:26:01 +00:00
|
|
|
list_try_apply(self, value)
|
|
|
|
}
|
|
|
|
|
2024-02-07 00:36:23 +00:00
|
|
|
#[inline]
|
|
|
|
fn reflect_kind(&self) -> ReflectKind {
|
|
|
|
ReflectKind::List
|
|
|
|
}
|
|
|
|
|
2020-11-28 00:39:59 +00:00
|
|
|
#[inline]
|
|
|
|
fn reflect_ref(&self) -> ReflectRef {
|
|
|
|
ReflectRef::List(self)
|
|
|
|
}
|
|
|
|
|
|
|
|
#[inline]
|
|
|
|
fn reflect_mut(&mut self) -> ReflectMut {
|
|
|
|
ReflectMut::List(self)
|
|
|
|
}
|
|
|
|
|
2022-11-06 16:58:38 +00:00
|
|
|
#[inline]
|
|
|
|
fn reflect_owned(self: Box<Self>) -> ReflectOwned {
|
|
|
|
ReflectOwned::List(self)
|
|
|
|
}
|
|
|
|
|
2020-11-28 00:39:59 +00:00
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn clone_value(&self) -> Box<dyn PartialReflect> {
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
Box::new(self.clone_dynamic())
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#[inline]
|
2020-12-01 19:15:07 +00:00
|
|
|
fn reflect_hash(&self) -> Option<u64> {
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
list_hash(self)
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
fn reflect_partial_eq(&self, value: &dyn PartialReflect) -> Option<bool> {
|
2020-11-28 00:39:59 +00:00
|
|
|
list_partial_eq(self, value)
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
fn debug(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
|
|
|
|
write!(f, "DynamicList(")?;
|
|
|
|
list_debug(self, f)?;
|
|
|
|
write!(f, ")")
|
|
|
|
}
|
bevy_reflect: Better proxies (#6971)
# Objective
> This PR is based on discussion from #6601
The Dynamic types (e.g. `DynamicStruct`, `DynamicList`, etc.) act as
both:
1. Dynamic containers which may hold any arbitrary data
2. Proxy types which may represent any other type
Currently, the only way we can represent the proxy-ness of a Dynamic is
by giving it a name.
```rust
// This is just a dynamic container
let mut data = DynamicStruct::default();
// This is a "proxy"
data.set_name(std::any::type_name::<Foo>());
```
This type name is the only way we check that the given Dynamic is a
proxy of some other type. When we need to "assert the type" of a `dyn
Reflect`, we call `Reflect::type_name` on it. However, because we're
only using a string to denote the type, we run into a few gotchas and
limitations.
For example, hashing a Dynamic proxy may work differently than the type
it proxies:
```rust
#[derive(Reflect, Hash)]
#[reflect(Hash)]
struct Foo(i32);
let concrete = Foo(123);
let dynamic = concrete.clone_dynamic();
let concrete_hash = concrete.reflect_hash();
let dynamic_hash = dynamic.reflect_hash();
// The hashes are not equal because `concrete` uses its own `Hash` impl
// while `dynamic` uses a reflection-based hashing algorithm
assert_ne!(concrete_hash, dynamic_hash);
```
Because the Dynamic proxy only knows about the name of the type, it's
unaware of any other information about it. This means it also differs on
`Reflect::reflect_partial_eq`, and may include ignored or skipped fields
in places the concrete type wouldn't.
## Solution
Rather than having Dynamics pass along just the type name of proxied
types, we can instead have them pass around the `TypeInfo`.
Now all Dynamic types contain an `Option<&'static TypeInfo>` rather than
a `String`:
```diff
pub struct DynamicTupleStruct {
- type_name: String,
+ represented_type: Option<&'static TypeInfo>,
fields: Vec<Box<dyn Reflect>>,
}
```
By changing `Reflect::get_type_info` to
`Reflect::represented_type_info`, hopefully we make this behavior a
little clearer. And to account for `None` values on these dynamic types,
`Reflect::represented_type_info` now returns `Option<&'static
TypeInfo>`.
```rust
let mut data = DynamicTupleStruct::default();
// Not proxying any specific type
assert!(dyn_tuple_struct.represented_type_info().is_none());
let type_info = <Foo as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
// Alternatively:
// let dyn_tuple_struct = foo.clone_dynamic();
// Now we're proxying `Foo`
assert!(dyn_tuple_struct.represented_type_info().is_some());
```
This means that we can have full access to all the static type
information for the proxied type. Future work would include
transitioning more static type information (trait impls, attributes,
etc.) over to the `TypeInfo` so it can actually be utilized by Dynamic
proxies.
### Alternatives & Rationale
> **Note**
> These alternatives were written when this PR was first made using a
`Proxy` trait. This trait has since been removed.
<details>
<summary>View</summary>
#### Alternative: The `Proxy<T>` Approach
I had considered adding something like a `Proxy<T>` type where `T` would
be the Dynamic and would contain the proxied type information.
This was nice in that it allows us to explicitly determine whether
something is a proxy or not at a type level. `Proxy<DynamicStruct>`
proxies a struct. Makes sense.
The reason I didn't go with this approach is because (1) tuples, (2)
complexity, and (3) `PartialReflect`.
The `DynamicTuple` struct allows us to represent tuples at runtime. It
also allows us to do something you normally can't with tuples: add new
fields. Because of this, adding a field immediately invalidates the
proxy (e.g. our info for `(i32, i32)` doesn't apply to `(i32, i32,
NewField)`). By going with this PR's approach, we can just remove the
type info on `DynamicTuple` when that happens. However, with the
`Proxy<T>` approach, it becomes difficult to represent this behavior—
we'd have to completely control how we access data for `T` for each `T`.
Secondly, it introduces some added complexities (aside from the manual
impls for each `T`). Does `Proxy<T>` impl `Reflect`? Likely yes, if we
want to represent it as `dyn Reflect`. What `TypeInfo` do we give it?
How would we forward reflection methods to the inner type (remember, we
don't have specialization)? How do we separate this from Dynamic types?
And finally, how do all this in a way that's both logical and intuitive
for users?
Lastly, introducing a `Proxy` trait rather than a `Proxy<T>` struct is
actually more inline with the [Unique Reflect
RFC](https://github.com/bevyengine/rfcs/pull/56). In a way, the `Proxy`
trait is really one part of the `PartialReflect` trait introduced in
that RFC (it's technically not in that RFC but it fits well with it),
where the `PartialReflect` serves as a way for proxies to work _like_
concrete types without having full access to everything a concrete
`Reflect` type can do. This would help bridge the gap between the
current state of the crate and the implementation of that RFC.
All that said, this is still a viable solution. If the community
believes this is the better path forward, then we can do that instead.
These were just my reasons for not initially going with it in this PR.
#### Alternative: The Type Registry Approach
The `Proxy` trait is great and all, but how does it solve the original
problem? Well, it doesn't— yet!
The goal would be to start moving information from the derive macro and
its attributes to the generated `TypeInfo` since these are known
statically and shouldn't change. For example, adding `ignored: bool` to
`[Un]NamedField` or a list of impls.
However, there is another way of storing this information. This is, of
course, one of the uses of the `TypeRegistry`. If we're worried about
Dynamic proxies not aligning with their concrete counterparts, we could
move more type information to the registry and require its usage.
For example, we could replace `Reflect::reflect_hash(&self)` with
`Reflect::reflect_hash(&self, registry: &TypeRegistry)`.
That's not the _worst_ thing in the world, but it is an ergonomics loss.
Additionally, other attributes may have their own requirements, further
restricting what's possible without the registry. The `Reflect::apply`
method will require the registry as well now. Why? Well because the
`map_apply` function used for the `Reflect::apply` impls on `Map` types
depends on `Map::insert_boxed`, which (at least for `DynamicMap`)
requires `Reflect::reflect_hash`. The same would apply when adding
support for reflection-based diffing, which will require
`Reflect::reflect_partial_eq`.
Again, this is a totally viable alternative. I just chose not to go with
it for the reasons above. If we want to go with it, then we can close
this PR and we can pursue this alternative instead.
#### Downsides
Just to highlight a quick potential downside (likely needs more
investigation): retrieving the `TypeInfo` requires acquiring a lock on
the `GenericTypeInfoCell` used by the `Typed` impls for generic types
(non-generic types use a `OnceBox which should be faster). I am not sure
how much of a performance hit that is and will need to run some
benchmarks to compare against.
</details>
### Open Questions
1. Should we use `Cow<'static, TypeInfo>` instead? I think that might be
easier for modding? Perhaps, in that case, we need to update
`Typed::type_info` and friends as well?
2. Are the alternatives better than the approach this PR takes? Are
there other alternatives?
---
## Changelog
### Changed
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info`
- This method now returns `Option<&'static TypeInfo>` rather than just
`&'static TypeInfo`
### Added
- Added `Reflect::is_dynamic` method to indicate when a type is dynamic
- Added a `set_represented_type` method on all dynamic types
### Removed
- Removed `TypeInfo::Dynamic` (use `Reflect::is_dynamic` instead)
- Removed `Typed` impls for all dynamic types
## Migration Guide
- The Dynamic types no longer take a string type name. Instead, they
require a static reference to `TypeInfo`:
```rust
#[derive(Reflect)]
struct MyTupleStruct(f32, f32);
let mut dyn_tuple_struct = DynamicTupleStruct::default();
dyn_tuple_struct.insert(1.23_f32);
dyn_tuple_struct.insert(3.21_f32);
// BEFORE:
let type_name = std::any::type_name::<MyTupleStruct>();
dyn_tuple_struct.set_name(type_name);
// AFTER:
let type_info = <MyTupleStruct as Typed>::type_info();
dyn_tuple_struct.set_represented_type(Some(type_info));
```
- `Reflect::get_type_info` has been renamed to
`Reflect::represented_type_info` and now also returns an
`Option<&'static TypeInfo>` (instead of just `&'static TypeInfo`):
```rust
// BEFORE:
let info: &'static TypeInfo = value.get_type_info();
// AFTER:
let info: &'static TypeInfo = value.represented_type_info().unwrap();
```
- `TypeInfo::Dynamic` and `DynamicInfo` has been removed. Use
`Reflect::is_dynamic` instead:
```rust
// BEFORE:
if matches!(value.get_type_info(), TypeInfo::Dynamic) {
// ...
}
// AFTER:
if value.is_dynamic() {
// ...
}
```
---------
Co-authored-by: radiish <cb.setho@gmail.com>
2023-04-26 12:17:46 +00:00
|
|
|
|
|
|
|
#[inline]
|
|
|
|
fn is_dynamic(&self) -> bool {
|
|
|
|
true
|
|
|
|
}
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
}
|
|
|
|
|
2023-06-05 20:31:20 +00:00
|
|
|
impl_type_path!((in bevy_reflect) DynamicList);
|
|
|
|
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
impl Debug for DynamicList {
|
|
|
|
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
|
|
|
|
self.debug(f)
|
|
|
|
}
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
impl FromIterator<Box<dyn PartialReflect>> for DynamicList {
|
|
|
|
fn from_iter<I: IntoIterator<Item = Box<dyn PartialReflect>>>(values: I) -> Self {
|
2024-07-15 15:38:11 +00:00
|
|
|
Self {
|
|
|
|
represented_type: None,
|
|
|
|
values: values.into_iter().collect(),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
impl<T: PartialReflect> FromIterator<T> for DynamicList {
|
2024-07-15 15:38:11 +00:00
|
|
|
fn from_iter<I: IntoIterator<Item = T>>(values: I) -> Self {
|
|
|
|
values
|
|
|
|
.into_iter()
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
.map(|field| Box::new(field).into_partial_reflect())
|
2024-07-15 15:38:11 +00:00
|
|
|
.collect()
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-04-26 00:17:38 +00:00
|
|
|
impl IntoIterator for DynamicList {
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
type Item = Box<dyn PartialReflect>;
|
2022-04-26 00:17:38 +00:00
|
|
|
type IntoIter = std::vec::IntoIter<Self::Item>;
|
|
|
|
|
|
|
|
fn into_iter(self) -> Self::IntoIter {
|
|
|
|
self.values.into_iter()
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-07-15 15:38:11 +00:00
|
|
|
impl<'a> IntoIterator for &'a DynamicList {
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
type Item = &'a dyn PartialReflect;
|
2024-07-15 15:38:11 +00:00
|
|
|
type IntoIter = ListIter<'a>;
|
|
|
|
|
|
|
|
fn into_iter(self) -> Self::IntoIter {
|
|
|
|
self.iter()
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
/// An iterator over an [`List`].
|
|
|
|
pub struct ListIter<'a> {
|
|
|
|
list: &'a dyn List,
|
|
|
|
index: usize,
|
|
|
|
}
|
|
|
|
|
|
|
|
impl<'a> ListIter<'a> {
|
|
|
|
/// Creates a new [`ListIter`].
|
|
|
|
#[inline]
|
|
|
|
pub const fn new(list: &'a dyn List) -> ListIter {
|
|
|
|
ListIter { list, index: 0 }
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
impl<'a> Iterator for ListIter<'a> {
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
type Item = &'a dyn PartialReflect;
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
|
|
|
|
#[inline]
|
|
|
|
fn next(&mut self) -> Option<Self::Item> {
|
|
|
|
let value = self.list.get(self.index);
|
2024-05-12 15:01:05 +00:00
|
|
|
self.index += value.is_some() as usize;
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
value
|
|
|
|
}
|
|
|
|
|
|
|
|
#[inline]
|
|
|
|
fn size_hint(&self) -> (usize, Option<usize>) {
|
|
|
|
let size = self.list.len();
|
|
|
|
(size, Some(size))
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
impl<'a> ExactSizeIterator for ListIter<'a> {}
|
|
|
|
|
|
|
|
/// Returns the `u64` hash of the given [list](List).
|
|
|
|
#[inline]
|
|
|
|
pub fn list_hash<L: List>(list: &L) -> Option<u64> {
|
2023-02-17 15:37:35 +00:00
|
|
|
let mut hasher = reflect_hasher();
|
2023-11-28 23:43:40 +00:00
|
|
|
Any::type_id(list).hash(&mut hasher);
|
bevy_reflect: Decouple `List` and `Array` traits (#7467)
# Objective
Resolves #7121
## Solution
Decouples `List` and `Array` by removing `Array` as a supertrait of `List`. Additionally, similar methods from `Array` have been added to `List` so that their usages can remain largely unchanged.
#### Possible Alternatives
##### `Sequence`
My guess for why we originally made `List` a subtrait of `Array` is that they share a lot of common operations. We could potentially move these overlapping methods to a `Sequence` (name taken from #7059) trait and make that a supertrait of both. This would allow functions to contain logic that simply operates on a sequence rather than "list vs array".
However, this means that we'd need to add methods for converting to a `dyn Sequence`. It also might be confusing since we wouldn't add a `ReflectRef::Sequence` or anything like that. Is such a trait worth adding (either in this PR or a followup one)?
---
## Changelog
- Removed `Array` as supertrait of `List`
- Added methods to `List` that were previously provided by `Array`
## Migration Guide
The `List` trait is no longer dependent on `Array`. Implementors of `List` can remove the `Array` impl and move its methods into the `List` impl (with only a couple tweaks).
```rust
// BEFORE
impl Array for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ArrayIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicArray {/* ... */}
}
impl List for Foo {
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
// AFTER
impl List for Foo {
fn get(&self, index: usize) -> Option<&dyn Reflect> {/* ... */}
fn get_mut(&mut self, index: usize) -> Option<&mut dyn Reflect> {/* ... */}
fn insert(&mut self, index: usize, element: Box<dyn Reflect>) {/* ... */}
fn remove(&mut self, index: usize) -> Box<dyn Reflect> {/* ... */}
fn push(&mut self, value: Box<dyn Reflect>) {/* ... */}
fn pop(&mut self) -> Option<Box<dyn Reflect>> {/* ... */}
fn len(&self) -> usize {/* ... */}
fn is_empty(&self) -> bool {/* ... */}
fn iter(&self) -> ListIter {/* ... */}
fn drain(self: Box<Self>) -> Vec<Box<dyn Reflect>> {/* ... */}
fn clone_dynamic(&self) -> DynamicList {/* ... */}
}
```
Some other small tweaks that will need to be made include:
- Use `ListIter` for `List::iter` instead of `ArrayIter` (the return type from `Array::iter`)
- Replace `array_hash` with `list_hash` in `Reflect::reflect_hash` for implementors of `List`
2023-02-13 21:07:53 +00:00
|
|
|
list.len().hash(&mut hasher);
|
|
|
|
for value in list.iter() {
|
|
|
|
hasher.write_u64(value.reflect_hash()?);
|
|
|
|
}
|
|
|
|
Some(hasher.finish())
|
|
|
|
}
|
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// Applies the elements of `b` to the corresponding elements of `a`.
|
|
|
|
///
|
|
|
|
/// If the length of `b` is greater than that of `a`, the excess elements of `b`
|
|
|
|
/// are cloned and appended to `a`.
|
|
|
|
///
|
|
|
|
/// # Panics
|
|
|
|
///
|
|
|
|
/// This function panics if `b` is not a list.
|
2020-11-28 00:39:59 +00:00
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub fn list_apply<L: List>(a: &mut L, b: &dyn PartialReflect) {
|
2024-05-08 14:26:01 +00:00
|
|
|
if let Err(err) = list_try_apply(a, b) {
|
|
|
|
panic!("{err}");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/// Tries to apply the elements of `b` to the corresponding elements of `a` and
|
|
|
|
/// returns a Result.
|
|
|
|
///
|
|
|
|
/// If the length of `b` is greater than that of `a`, the excess elements of `b`
|
|
|
|
/// are cloned and appended to `a`.
|
|
|
|
///
|
|
|
|
/// # Errors
|
|
|
|
///
|
|
|
|
/// This function returns an [`ApplyError::MismatchedKinds`] if `b` is not a list or if
|
|
|
|
/// applying elements to each other fails.
|
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub fn list_try_apply<L: List>(a: &mut L, b: &dyn PartialReflect) -> Result<(), ApplyError> {
|
2020-11-28 00:39:59 +00:00
|
|
|
if let ReflectRef::List(list_value) = b.reflect_ref() {
|
|
|
|
for (i, value) in list_value.iter().enumerate() {
|
|
|
|
if i < a.len() {
|
|
|
|
if let Some(v) = a.get_mut(i) {
|
2024-05-08 14:26:01 +00:00
|
|
|
v.try_apply(value)?;
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
} else {
|
2024-05-08 14:26:01 +00:00
|
|
|
List::push(a, value.clone_value());
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
2024-05-08 14:26:01 +00:00
|
|
|
return Err(ApplyError::MismatchedKinds {
|
|
|
|
from_kind: b.reflect_kind(),
|
|
|
|
to_kind: ReflectKind::List,
|
|
|
|
});
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
2024-05-08 14:26:01 +00:00
|
|
|
Ok(())
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
|
2022-01-14 19:09:44 +00:00
|
|
|
/// Compares a [`List`] with a [`Reflect`] value.
|
|
|
|
///
|
|
|
|
/// Returns true if and only if all of the following are true:
|
|
|
|
/// - `b` is a list;
|
|
|
|
/// - `b` is the same length as `a`;
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
/// - [`PartialReflect::reflect_partial_eq`] returns `Some(true)` for pairwise elements of `a` and `b`.
|
2022-07-05 17:41:54 +00:00
|
|
|
///
|
|
|
|
/// Returns [`None`] if the comparison couldn't even be performed.
|
2020-11-28 00:39:59 +00:00
|
|
|
#[inline]
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
pub fn list_partial_eq<L: List + ?Sized>(a: &L, b: &dyn PartialReflect) -> Option<bool> {
|
2022-11-04 21:32:09 +00:00
|
|
|
let ReflectRef::List(list) = b.reflect_ref() else {
|
2020-11-28 00:39:59 +00:00
|
|
|
return Some(false);
|
|
|
|
};
|
|
|
|
|
|
|
|
if a.len() != list.len() {
|
|
|
|
return Some(false);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (a_value, b_value) in a.iter().zip(list.iter()) {
|
2022-07-05 17:41:54 +00:00
|
|
|
let eq_result = a_value.reflect_partial_eq(b_value);
|
|
|
|
if let failed @ (Some(false) | None) = eq_result {
|
|
|
|
return failed;
|
2020-11-28 00:39:59 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
Some(true)
|
|
|
|
}
|
2022-04-26 00:17:38 +00:00
|
|
|
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
/// The default debug formatter for [`List`] types.
|
|
|
|
///
|
|
|
|
/// # Example
|
|
|
|
/// ```
|
|
|
|
/// use bevy_reflect::Reflect;
|
|
|
|
///
|
|
|
|
/// let my_list: &dyn Reflect = &vec![1, 2, 3];
|
|
|
|
/// println!("{:#?}", my_list);
|
|
|
|
///
|
|
|
|
/// // Output:
|
|
|
|
///
|
|
|
|
/// // [
|
|
|
|
/// // 1,
|
|
|
|
/// // 2,
|
|
|
|
/// // 3,
|
|
|
|
/// // ]
|
|
|
|
/// ```
|
|
|
|
#[inline]
|
2023-11-28 23:43:40 +00:00
|
|
|
pub fn list_debug(dyn_list: &dyn List, f: &mut Formatter<'_>) -> std::fmt::Result {
|
bevy_reflect: Improve debug formatting for reflected types (#4218)
# Objective
Debugging reflected types can be somewhat frustrating since all `dyn Reflect` trait objects return something like `Reflect(core::option::Option<alloc::string::String>)`.
It would be much nicer to be able to see the actual value— or even use a custom `Debug` implementation.
## Solution
Added `Reflect::debug` which allows users to customize the debug output. It sets defaults for all `ReflectRef` subtraits and falls back to `Reflect(type_name)` if no `Debug` implementation was registered.
To register a custom `Debug` impl, users can add `#[reflect(Debug)]` like they can with other traits.
### Example
Using the following structs:
```rust
#[derive(Reflect)]
pub struct Foo {
a: usize,
nested: Bar,
#[reflect(ignore)]
_ignored: NonReflectedValue,
}
#[derive(Reflect)]
pub struct Bar {
value: Vec2,
tuple_value: (i32, String),
list_value: Vec<usize>,
// We can't determine debug formatting for Option<T> yet
unknown_value: Option<String>,
custom_debug: CustomDebug
}
#[derive(Reflect)]
#[reflect(Debug)]
struct CustomDebug;
impl Debug for CustomDebug {
fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
write!(f, "This is a custom debug!")
}
}
pub struct NonReflectedValue {
_a: usize,
}
```
We can do:
```rust
let value = Foo {
a: 1,
_ignored: NonReflectedValue { _a: 10 },
nested: Bar {
value: Vec2::new(1.23, 3.21),
tuple_value: (123, String::from("Hello")),
list_value: vec![1, 2, 3],
unknown_value: Some(String::from("World")),
custom_debug: CustomDebug
},
};
let reflected_value: &dyn Reflect = &value;
println!("{:#?}", reflected_value)
```
Which results in:
```rust
Foo {
a: 2,
nested: Bar {
value: Vec2(
1.23,
3.21,
),
tuple_value: (
123,
"Hello",
),
list_value: [
1,
2,
3,
],
unknown_value: Reflect(core::option::Option<alloc::string::String>),
custom_debug: This is a custom debug!,
},
}
```
Notice that neither `Foo` nor `Bar` implement `Debug`, yet we can still deduce it. This might be a concern if we're worried about leaking internal values. If it is, we might want to consider a way to exclude fields (possibly with a `#[reflect(hide)]` macro) or make it purely opt in (as opposed to the default implementation automatically handled by ReflectRef subtraits).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2022-05-30 16:41:31 +00:00
|
|
|
let mut debug = f.debug_list();
|
|
|
|
for item in dyn_list.iter() {
|
|
|
|
debug.entry(&item as &dyn Debug);
|
|
|
|
}
|
|
|
|
debug.finish()
|
|
|
|
}
|
|
|
|
|
2022-04-26 00:17:38 +00:00
|
|
|
#[cfg(test)]
|
|
|
|
mod tests {
|
|
|
|
use super::DynamicList;
|
2024-05-12 15:01:05 +00:00
|
|
|
use crate::{Reflect, ReflectRef};
|
2022-05-13 01:13:30 +00:00
|
|
|
use std::assert_eq;
|
2022-04-26 00:17:38 +00:00
|
|
|
|
|
|
|
#[test]
|
|
|
|
fn test_into_iter() {
|
|
|
|
let mut list = DynamicList::default();
|
|
|
|
list.push(0usize);
|
|
|
|
list.push(1usize);
|
|
|
|
list.push(2usize);
|
|
|
|
let items = list.into_iter();
|
|
|
|
for (index, item) in items.into_iter().enumerate() {
|
reflect: implement the unique reflect rfc (#7207)
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](https://github.com/bevyengine/bevy/blob/8e3488c88065a94a4f72199587e59341c9b6553d/crates/bevy_reflect/src/reflect.rs#L337-L342)
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
2024-08-12 17:01:41 +00:00
|
|
|
let value = item
|
|
|
|
.try_take::<usize>()
|
|
|
|
.expect("couldn't downcast to usize");
|
2022-04-26 00:17:38 +00:00
|
|
|
assert_eq!(index, value);
|
|
|
|
}
|
|
|
|
}
|
2024-05-12 15:01:05 +00:00
|
|
|
|
|
|
|
#[test]
|
|
|
|
fn next_index_increment() {
|
|
|
|
const SIZE: usize = if cfg!(debug_assertions) {
|
|
|
|
4
|
|
|
|
} else {
|
|
|
|
// If compiled in release mode, verify we dont overflow
|
|
|
|
usize::MAX
|
|
|
|
};
|
|
|
|
let b = Box::new(vec![(); SIZE]).into_reflect();
|
|
|
|
|
|
|
|
let ReflectRef::List(list) = b.reflect_ref() else {
|
|
|
|
panic!("Not a list...");
|
|
|
|
};
|
|
|
|
|
|
|
|
let mut iter = list.iter();
|
|
|
|
iter.index = SIZE - 1;
|
|
|
|
assert!(iter.next().is_some());
|
|
|
|
|
|
|
|
// When None we should no longer increase index
|
|
|
|
assert!(iter.next().is_none());
|
|
|
|
assert!(iter.index == SIZE);
|
|
|
|
assert!(iter.next().is_none());
|
|
|
|
assert!(iter.index == SIZE);
|
|
|
|
}
|
2022-04-26 00:17:38 +00:00
|
|
|
}
|