UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
//! This example illustrates scrolling in Bevy UI.
|
|
|
|
|
|
2024-11-08 21:01:16 +00:00
|
|
|
use accesskit::{Node as Accessible, Role};
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
use bevy::{
|
2024-11-08 21:01:16 +00:00
|
|
|
a11y::AccessibilityNode,
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
input::mouse::{MouseScrollUnit, MouseWheel},
|
|
|
|
|
picking::focus::HoverMap,
|
|
|
|
|
prelude::*,
|
|
|
|
|
winit::WinitSettings,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
fn main() {
|
|
|
|
|
let mut app = App::new();
|
|
|
|
|
app.add_plugins(DefaultPlugins)
|
|
|
|
|
.insert_resource(WinitSettings::desktop_app())
|
|
|
|
|
.add_systems(Startup, setup)
|
|
|
|
|
.add_systems(Update, update_scroll_position);
|
|
|
|
|
|
|
|
|
|
app.run();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
const FONT_SIZE: f32 = 20.;
|
|
|
|
|
const LINE_HEIGHT: f32 = 21.;
|
|
|
|
|
|
|
|
|
|
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
|
|
|
|
|
// Camera
|
2024-10-05 01:59:52 +00:00
|
|
|
commands.spawn((Camera2d, IsDefaultUiCamera));
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
|
2024-09-24 11:42:59 +00:00
|
|
|
// root node
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
commands
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
width: Val::Percent(100.0),
|
|
|
|
|
height: Val::Percent(100.0),
|
|
|
|
|
justify_content: JustifyContent::SpaceBetween,
|
|
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior::IGNORE)
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// horizontal scroll example
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
width: Val::Percent(100.),
|
|
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// header
|
|
|
|
|
parent.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text::new("Horizontally Scrolling list (Ctrl + Mousewheel)"),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
font_size: FONT_SIZE,
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
|
|
|
|
));
|
|
|
|
|
|
|
|
|
|
// horizontal scroll container
|
|
|
|
|
parent
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
.spawn((
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
width: Val::Percent(80.),
|
|
|
|
|
margin: UiRect::all(Val::Px(10.)),
|
|
|
|
|
flex_direction: FlexDirection::Row,
|
|
|
|
|
overflow: Overflow::scroll_x(), // n.b.
|
|
|
|
|
..default()
|
|
|
|
|
},
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
BackgroundColor(Color::srgb(0.10, 0.10, 0.10)),
|
|
|
|
|
))
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
for i in 0..100 {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
parent.spawn((Text(format!("Item {i}")),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
font: asset_server
|
|
|
|
|
.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
..default()
|
|
|
|
|
},
|
|
|
|
|
Label,
|
2024-11-04 20:07:38 +00:00
|
|
|
AccessibilityNode(Accessible::new(Role::ListItem)),
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
))
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.insert(Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
min_width: Val::Px(200.),
|
|
|
|
|
align_content: AlignContent::Center,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
|
|
|
|
.observe(|
|
|
|
|
|
trigger: Trigger<Pointer<Down>>,
|
|
|
|
|
mut commands: Commands
|
|
|
|
|
| {
|
|
|
|
|
if trigger.event().button == PointerButton::Primary {
|
2024-12-08 21:55:09 +00:00
|
|
|
commands.entity(trigger.target()).despawn_recursive();
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
// container for all other examples
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
width: Val::Percent(100.),
|
|
|
|
|
height: Val::Percent(100.),
|
|
|
|
|
flex_direction: FlexDirection::Row,
|
|
|
|
|
justify_content: JustifyContent::SpaceBetween,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// vertical scroll example
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
justify_content: JustifyContent::Center,
|
|
|
|
|
align_items: AlignItems::Center,
|
|
|
|
|
width: Val::Px(200.),
|
|
|
|
|
..default()
|
|
|
|
|
})
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Title
|
|
|
|
|
parent.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text::new("Vertically Scrolling List"),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
font_size: FONT_SIZE,
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
|
|
|
|
));
|
|
|
|
|
// Scrolling list
|
|
|
|
|
parent
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
.spawn((
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
align_self: AlignSelf::Stretch,
|
|
|
|
|
height: Val::Percent(50.),
|
|
|
|
|
overflow: Overflow::scroll_y(), // n.b.
|
|
|
|
|
..default()
|
|
|
|
|
},
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
BackgroundColor(Color::srgb(0.10, 0.10, 0.10)),
|
|
|
|
|
))
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// List items
|
|
|
|
|
for i in 0..25 {
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
min_height: Val::Px(LINE_HEIGHT),
|
|
|
|
|
max_height: Val::Px(LINE_HEIGHT),
|
|
|
|
|
..default()
|
|
|
|
|
})
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
|
|
|
|
.with_children(|parent| {
|
|
|
|
|
parent
|
|
|
|
|
.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text(format!("Item {i}")),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server
|
|
|
|
|
.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
2024-11-04 20:07:38 +00:00
|
|
|
AccessibilityNode(Accessible::new(
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Role::ListItem,
|
|
|
|
|
)),
|
|
|
|
|
))
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
// Bidirectional scroll example
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
justify_content: JustifyContent::Center,
|
|
|
|
|
align_items: AlignItems::Center,
|
|
|
|
|
width: Val::Px(200.),
|
|
|
|
|
..default()
|
|
|
|
|
})
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Title
|
|
|
|
|
parent.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text::new("Bidirectionally Scrolling List"),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
font_size: FONT_SIZE,
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
|
|
|
|
));
|
|
|
|
|
// Scrolling list
|
|
|
|
|
parent
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
.spawn((
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
align_self: AlignSelf::Stretch,
|
|
|
|
|
height: Val::Percent(50.),
|
|
|
|
|
overflow: Overflow::scroll(), // n.b.
|
|
|
|
|
..default()
|
|
|
|
|
},
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
BackgroundColor(Color::srgb(0.10, 0.10, 0.10)),
|
|
|
|
|
))
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Rows in each column
|
|
|
|
|
for oi in 0..10 {
|
|
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
flex_direction: FlexDirection::Row,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior::IGNORE)
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Elements in each row
|
|
|
|
|
for i in 0..25 {
|
|
|
|
|
parent
|
|
|
|
|
.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text(format!("Item {}", (oi * 25) + i)),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load(
|
|
|
|
|
"fonts/FiraSans-Bold.ttf",
|
|
|
|
|
),
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
2024-11-04 20:07:38 +00:00
|
|
|
AccessibilityNode(Accessible::new(
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Role::ListItem,
|
|
|
|
|
)),
|
|
|
|
|
))
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
|
2024-09-24 11:42:59 +00:00
|
|
|
// Nested scrolls example
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
parent
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
.spawn(Node {
|
|
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
justify_content: JustifyContent::Center,
|
|
|
|
|
align_items: AlignItems::Center,
|
|
|
|
|
width: Val::Px(200.),
|
|
|
|
|
..default()
|
|
|
|
|
})
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Title
|
|
|
|
|
parent.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text::new("Nested Scrolling Lists"),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load("fonts/FiraSans-Bold.ttf"),
|
|
|
|
|
font_size: FONT_SIZE,
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
|
|
|
|
));
|
|
|
|
|
// Outer, horizontal scrolling container
|
|
|
|
|
parent
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
.spawn((
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
column_gap: Val::Px(20.),
|
|
|
|
|
flex_direction: FlexDirection::Row,
|
|
|
|
|
align_self: AlignSelf::Stretch,
|
|
|
|
|
height: Val::Percent(50.),
|
|
|
|
|
overflow: Overflow::scroll_x(), // n.b.
|
|
|
|
|
..default()
|
|
|
|
|
},
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
BackgroundColor(Color::srgb(0.10, 0.10, 0.10)),
|
|
|
|
|
))
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
.with_children(|parent| {
|
|
|
|
|
// Inner, scrolling columns
|
|
|
|
|
for oi in 0..30 {
|
|
|
|
|
parent
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
.spawn((
|
Merge Style properties into Node. Use ComputedNode for computed properties. (#15975)
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
2024-10-18 22:25:33 +00:00
|
|
|
Node {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
flex_direction: FlexDirection::Column,
|
|
|
|
|
align_self: AlignSelf::Stretch,
|
|
|
|
|
overflow: Overflow::scroll_y(),
|
|
|
|
|
..default()
|
|
|
|
|
},
|
Migrate UI bundles to required components (#15898)
# Objective
- Migrate UI bundles to required components, fixes #15889
## Solution
- deprecate `NodeBundle` in favor of `Node`
- deprecate `ImageBundle` in favor of `UiImage`
- deprecate `ButtonBundle` in favor of `Button`
## Testing
CI.
## Migration Guide
- Replace all uses of `NodeBundle` with `Node`. e.g.
```diff
commands
- .spawn(NodeBundle {
- style: Style {
+ .spawn((
+ Node::default(),
+ Style {
width: Val::Percent(100.),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
},
- ..default()
- })
+ ))
```
- Replace all uses of `ButtonBundle` with `Button`. e.g.
```diff
.spawn((
- ButtonBundle {
- style: Style {
- width: Val::Px(w),
- height: Val::Px(h),
- // horizontally center child text
- justify_content: JustifyContent::Center,
- // vertically center child text
- align_items: AlignItems::Center,
- margin: UiRect::all(Val::Px(20.0)),
- ..default()
- },
- image: image.clone().into(),
+ Button,
+ Style {
+ width: Val::Px(w),
+ height: Val::Px(h),
+ // horizontally center child text
+ justify_content: JustifyContent::Center,
+ // vertically center child text
+ align_items: AlignItems::Center,
+ margin: UiRect::all(Val::Px(20.0)),
..default()
},
+ UiImage::from(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
```
- Replace all uses of `ImageBundle` with `UiImage`. e.g.
```diff
- commands.spawn(ImageBundle {
- image: UiImage {
+ commands.spawn((
+ UiImage {
texture: metering_mask,
..default()
},
- style: Style {
+ Style {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
..default()
},
- ..default()
- });
+ ));
```
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-17 21:11:02 +00:00
|
|
|
BackgroundColor(Color::srgb(0.05, 0.05, 0.05)),
|
|
|
|
|
))
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
})
|
|
|
|
|
.with_children(|parent| {
|
|
|
|
|
for i in 0..25 {
|
|
|
|
|
parent
|
|
|
|
|
.spawn((
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
Text(format!("Item {}", (oi * 25) + i)),
|
2024-10-13 17:06:22 +00:00
|
|
|
TextFont {
|
Text rework (#15591)
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-09 18:35:36 +00:00
|
|
|
font: asset_server.load(
|
|
|
|
|
"fonts/FiraSans-Bold.ttf",
|
|
|
|
|
),
|
|
|
|
|
..default()
|
|
|
|
|
},
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Label,
|
2024-11-04 20:07:38 +00:00
|
|
|
AccessibilityNode(Accessible::new(
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
Role::ListItem,
|
|
|
|
|
)),
|
|
|
|
|
))
|
2024-10-07 17:09:57 +00:00
|
|
|
.insert(PickingBehavior {
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
should_block_lower: false,
|
|
|
|
|
..default()
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/// Updates the scroll position of scrollable nodes in response to mouse input
|
|
|
|
|
pub fn update_scroll_position(
|
|
|
|
|
mut mouse_wheel_events: EventReader<MouseWheel>,
|
|
|
|
|
hover_map: Res<HoverMap>,
|
|
|
|
|
mut scrolled_node_query: Query<&mut ScrollPosition>,
|
|
|
|
|
keyboard_input: Res<ButtonInput<KeyCode>>,
|
|
|
|
|
) {
|
|
|
|
|
for mouse_wheel_event in mouse_wheel_events.read() {
|
|
|
|
|
let (mut dx, mut dy) = match mouse_wheel_event.unit {
|
|
|
|
|
MouseScrollUnit::Line => (
|
|
|
|
|
mouse_wheel_event.x * LINE_HEIGHT,
|
|
|
|
|
mouse_wheel_event.y * LINE_HEIGHT,
|
|
|
|
|
),
|
|
|
|
|
MouseScrollUnit::Pixel => (mouse_wheel_event.x, mouse_wheel_event.y),
|
|
|
|
|
};
|
|
|
|
|
|
2024-09-24 11:40:54 +00:00
|
|
|
if keyboard_input.pressed(KeyCode::ControlLeft)
|
|
|
|
|
|| keyboard_input.pressed(KeyCode::ControlRight)
|
UI Scrolling (#15291)
# Objective
- Fixes #8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
2024-09-23 17:17:58 +00:00
|
|
|
{
|
|
|
|
|
std::mem::swap(&mut dx, &mut dy);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (_pointer, pointer_map) in hover_map.iter() {
|
|
|
|
|
for (entity, _hit) in pointer_map.iter() {
|
|
|
|
|
if let Ok(mut scroll_position) = scrolled_node_query.get_mut(*entity) {
|
|
|
|
|
scroll_position.offset_x -= dx;
|
|
|
|
|
scroll_position.offset_y -= dy;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
