ansible-collection-hardening/roles/os_hardening/README.md

devsec.os_hardening

Looking for the old ansible-os-hardening role?

This role is now part of the hardening-collection. You can find the old role in the branch legacy.

Description

This role provides numerous security-related configurations, providing all-round base protection. It is intended to be compliant with the DevSec Linux Baseline.

It configures:

• Removes unused yum repositories and enables GPG key-checking
• Removes packages with known issues
• Configures pam for strong password checks
• Installs and configures auditd
• Disables core dumps via soft limits
• sets a restrictive umask
• Configures execute permissions of files in system paths
• Hardens access to shadow and passwd files
• Disables unused filesystems
• Disables rhosts
• Configures secure ttys
• Configures kernel parameters via sysctl
• Enables selinux on EL-based systems
• Removes SUIDs and GUIDs
• Configures login and passwords of system accounts

It will not:

• Update system packages
• Install security patches

Requirements

• Ansible 2.9.0

Known Limitations

Docker support

If you're using Docker / Kubernetes+Docker you'll need to override the ipv4 ip forward sysctl setting.

- hosts: localhost
  collections:
    - devsec.hardening
  roles:
    - devsec.hardening.os_hardening
  vars:
    sysctl_overwrite:
      # Enable IPv4 traffic forwarding.
      net.ipv4.ip_forward: 1

hidepid on RHEL/CentOS 7

When having polkit-0.112-18.el7 (and later) installed and /proc mounted with hidepid=2, everytime someone uses systemctl the following error is displayed, but systemctl runs successfully.

Error registering authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine user of subject (polkit-error-quark, 0)

We decided to set hidepid=0 to remove the error message, if you want to use the other proposed workaround, you have to setup the user yourself and set our option to hidepid_option: 2 via Ansible vars.

For further details see RedHat: "GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine user of subject" seen when executing systemctl command or #364: hidepid=2 gives error when running systemctl on EL7

sysctl - vm.mmap_rnd_bits

We are setting this sysctl to a default of 32, some systems only support smaller values and this will generate an error. Unfortunately we cannot determine the correct applicable maximum. If you encounter this error you have to override this sysctl in your playbook.

- hosts: localhost
  collections:
    - devsec.hardening
  roles:
    - devsec.hardening.os_hardening
  vars:
    sysctl_overwrite:
      vm.mmap_rnd_bits: 16

Testing with inspec

If you're using inspec to test your machines after applying this role, please make sure to add the connecting user to the os_ignore_users-variable. Otherwise inspec will fail. For more information, see issue #124.

We know that this is the case on Raspberry Pi.

Variables

• os_desktop_enable
  • Default: false
  • Description: true if this is a desktop system, ie Xorg, KDE/GNOME/Unity/etc.
• os_env_extra_user_paths
  • Default: []
  • Description: add additional paths to the user's PATH variable (default is empty).
• os_env_umask
  • Default: 027 or 077 depending on the platform.
  • Description: set default permissions for new files to 750 or 700.
• os_auth_pw_max_age
  • Default: 60
  • Description: maximum password age (set to 99999 to effectively disable it).
• os_auth_pw_min_age
  • Default: 7
  • Description: minimum password age (before allowing any other password change).
• os_auth_retries
  • Default: 5
  • Description: the maximum number of authentication attempts, before the account is locked for some time.
• os_auth_lockout_time
  • Default: 600
  • Description: time in seconds that needs to pass, if the account was locked due to too many failed authentication attempts.
• os_auth_timeout
  • Default: 60
  • Description: authentication timeout in seconds, so login will exit if this time passes.
• os_auth_allow_homeless
  • Default: false
  • Description: true if to allow users without home to login.
• os_auth_pam_passwdqc_enable
  • Default: true
  • Description: true if you want to use strong password checking in PAM using passwdqc.
• os_auth_pam_passwdqc_options
  • Default: min=disabled,disabled,16,12,8
  • Description: set to any option line (as a string) that you want to pass to passwdqc.
• os_auth_pam_sssd_enable
  • Default: false (on RHEL8/CentOS8/Fedora true)
  • Description: activate PAM auth support for sssd
• os_security_users_allow
  • Default: []
  • Description: list of things, that a user is allowed to do. May contain change_user.
• os_security_kernel_enable_module_loading
  • Default: true
  • Description: true if you want to allowed to change kernel modules once the system is running (eg modprobe, rmmod).
• os_security_kernel_enable_core_dump
  • Default: false
  • Description: kernel is crashing or otherwise misbehaving and a kernel core dump is created.
• os_security_suid_sgid_enforce
  • Default: true
  • Description: true if you want to reduce SUID/SGID bits. There is already a list of items which are searched for configured, but you can also add your own.
• os_security_suid_sgid_blacklist
  • Default: []
  • Description: a list of paths which should have their SUID/SGID bits removed.
• os_security_suid_sgid_whitelist
  • Default: []
  • Description: a list of paths which should not have their SUID/SGID bits altered.
• os_security_suid_sgid_remove_from_unknown
  • Default: false
  • Description: true if you want to remove SUID/SGID bits from any file, that is not explicitly configured in a blacklist. This will make every Ansible-run search through the mounted filesystems looking for SUID/SGID bits that are not configured in the default and user blacklist. If it finds an SUID/SGID bit, it will be removed, unless this file is in your whitelist.
• os_security_packages_clean
  • Default: true
  • Description: removes packages with known issues. See section packages.
• os_selinux_state
  • Default: enforcing
  • Description: Set the SELinux state, can be either disabled, permissive, or enforcing.
• os_selinux_policy
  • Default: targeted
  • Description: Set the SELinux polixy.
• ufw_manage_defaults
  • Default: true
  • Description: true means apply all settings with ufw_ prefix.
• ufw_ipt_sysctl
  • Default: ''
  • Description: by default it disables IPT_SYSCTL in /etc/default/ufw. If you want to overwrite /etc/sysctl.conf values using ufw - set it to your sysctl dictionary, for example /etc/ufw/sysctl.conf.
• ufw_default_input_policy
  • Default: DROP
  • Description: set default input policy of ufw to DROP.
• ufw_default_output_policy
  • Default: ACCEPT
  • Description: set default output policy of ufw to ACCEPT.
• ufw_default_forward_policy
  • Default: DROP
  • Description: set default forward policy of ufw to DROP.
• os_auditd_enabled
  • Default: true
  • Description: Set to false to disable installing and configuring auditd.
• os_auditd_max_log_file_action
  • Default: keep_logs
  • Description: Defines the behaviour of auditd when its log file is filled up. Possible other values are described in the auditd.conf man page. The most common alternative to the default may be rotate.
• os_auditd_max_log_file
  • Default: 6
  • Description: This keyword specifies the maximum file size in megabytes. When this limit is reached, it will trigger a configurable action. The value given must be numeric.
• hidepid_option
  • Default: 2 (on RHEL/CentOS7 0, see known limitations)
  • Description: 0: This is the default setting and gives you the default behaviour. 1: With this option an normal user would not see other processes but their own about ps, top etc, but he is still able to see process IDs in /proc. 2: Users are only able too see their own processes (like with hidepid=1), but also the other process IDs are hidden for them in /proc.
• proc_mnt_options
  • Default: rw,nosuid,nodev,noexec,relatime,hidepid={{ hidepid_option }}
  • Description: Mount proc with hardenized options, including hidepid with variable value.

Packages

We remove the following packages:

• xinetd (NSA, Chapter 3.2.1)
• inetd (NSA, Chapter 3.2.1)
• tftp-server (NSA, Chapter 3.2.5)
• ypserv (NSA, Chapter 3.2.4)
• telnet-server (NSA, Chapter 3.2.2)
• rsh-server (NSA, Chapter 3.2.3)
• prelink (open-scap)

Disabled filesystems

We disable the following filesystems, because they're most likely not used:

• "cramfs"
• "freevxfs"
• "jffs2"
• "hfs"
• "hfsplus"
• "squashfs"
• "udf"
• "vfat" # only if uefi is not in use

To prevent some of the filesystems from being disabled, add them to the os_filesystem_whitelist variable.

Example Playbook

- hosts: localhost
  collections:
    - devsec.hardening
  roles:
    - os_hardening

Changing sysctl variables

If you want to override sysctl-variables, you can use the sysctl_overwrite variable (in older versions you had to override the whole sysctl_dict). So for example if you want to change the IPv4 traffic forwarding variable to 1, do it like this:

- hosts: localhost
  collections:
    - devsec.hardening
  roles:
    - os_hardening
  vars:
    sysctl_overwrite:
      # Enable IPv4 traffic forwarding.
      net.ipv4.ip_forward: 1

Alternatively you can change Ansible's hash-behaviour to merge, then you only have to overwrite the single hash you need to. But please be aware that changing the hash-behaviour changes it for all your playbooks and is not recommended by Ansible.

Improving Kernel Audit logging

By default, any process that starts before the auditd daemon will have an AUID of 4294967295. To improve this and provide more accurate logging, it's recommended to add the kernel boot parameter audit=1 to you configuration. Without doing this, you will find that your auditd logs fail to properly audit all processes.

For more information, please see this upstream documentation and your system's boot loader documentation for how to configure additional kernel parameters.

More information

We use specific PAM configuration for every linux distribution. This is a very diverse area, since every vendor seems to push their own system for managing PAM. We used following guides and sources for our configuration.

• on Debian/Ubuntu we use pam-config-framework
• RHEL8 and compatible use information from authselect, but our setup disables the configuration from authselect
• RHEL 6/7 and compatible use authconfig, but our setup disables the configuration from authconfig
• for RHEL 6/7 we also use information from Desktop Security

This role is mostly based on guides by:

• Arch Linux wiki, Sysctl hardening
• NSA: Guide to the Secure Configuration of Red Hat Enterprise Linux 5
• Ubuntu Security/Features
• Deutsche Telekom, Group IT Security, Security Requirements (German)