Learn-Vim/ch02_buffers_windows_tabs.md

Ch02. Buffers, Windows, and Tabs

If you have used a modern text editor, you are probably familiar with windows and tabs. Vim uses three display abstractions instead of two: buffers, windows, and tabs. In this chapter, I will explain what buffers, windows, and tabs are and how they work in Vim.

Before you start, make sure you have the set hidden option in vimrc. Without it, whenever you switch buffers and your current buffer is not saved, Vim will prompt you to save the file (you don't want that if you want to move quickly). I haven't covered vimrc yet. If you don't have a vimrc, create one. It is usually placed at the root directory and named .vimrc. I have mine on ~/.vimrc. To see where you should create your vimrc, check out :h vimrc. Inside it, add:

set hidden

Save it, then source it (run :source % from inside the vimrc).

Buffers

What is a buffer?

A buffer is an in-memory space where you can write and edit some text. When you open a file in Vim, the data is bound to a buffer. When you open 3 files in Vim, you have 3 buffers.

Have two empty files, file1.js and file2.js available (if possible, create them with Vim). Run this in the terminal:

vim file1.js

What you are seeing is file1.js buffer. Whenever you open a new file, Vim creates a new buffer.

Exit Vim. This time, open two new files:

vim file1.js file2.js

Vim currently displays file1.js buffer, but it actually creates two buffers: file1.js buffer and file2.js buffer. Run :buffers to see all the buffers (alternatively, you can use :ls or :files too). You should see both file1.js and file2.js listed. Running vim file1 file2 file3 ... filen creates n amount of buffers. Each time you open a new file, Vim create a new buffer for that file.

There are several ways you can traverse buffers:

• :bnext to go to the next buffer (:bprevious to go to the previous buffer).
• :buffer + filename. Vim can autocomplete filename with <Tab>.
• :buffer + n, where n is the buffer number. For example, typing :buffer 2 will take you to buffer #2.
• Jump to the older position in jump list with Ctrl-O and to the newer position with Ctrl-I. These are not buffer specific methods, but they can be used to jump between different buffers. I will talk more about jumps in Chapter 5.
• Go to the previously edited buffer with Ctrl-^.

Once Vim creates a buffer, it will remain in your buffers list. To remove it, you can type :bdelete. It accepts either a buffer number (:bdelete 3 to delete buffer #3) or a filename (:bdelete then use <Tab> to autocomplete).

The hardest thing for me when learning about buffer was visualizing how it worked because my mind was used to windows from when using a mainstream text editor. A good analogy is a deck of playing cards. If I have 2 buffers, I have a stack of 2 cards. The card on top is the only card I see, but I know there are card(s) below it. If I see file1.js buffer displayed then the file1.js card is on the top of the deck. I can't see the other card, the file2.js, but it's there. If I switch buffers to file2.js, that file2.js card is now on the top of the deck and file1.js card is at the bottom.

If you haven't used Vim before, this is a new concept. Take your time to understand it.

Exiting Vim

By the way, if you have multiple buffers opened, you can close all of them with quit-all:

:qall

If you want to close without saving your changes, just add ! at the end:

:qall!

To save and quit all, run:

:wqall

Windows

A window is a viewport on a buffer. If you're coming from a mainstream editor, this concept may be familiar to you. Most text editors have the ability to display multiple windows. In Vim, you can also have multiple windows.

Let's open file1.js from the terminal again:

vim file1.js

Earlier I said that you're looking at file1.js buffer. While that was correct, that statement was incomplete. You are looking at file1.js buffer displayed through a window. A window is what you are seeing a buffer through.

Don't quit Vim yet. Run:

:split file2.js

Now you are looking at two buffers through two windows. The top window displays file2.js buffer. The bottom window displays file1.js buffer.

If you want to navigate between windows, use these shortcuts:

Ctrl-W H    Moves the cursor to the left window
Ctrl-W J    Moves the cursor to the window below
Ctrl-W K    Moves the cursor to the window upper
Ctrl-W L    Moves the cursor to the right window

Now run:

:vsplit file3.js

You are now seeing three windows displaying three buffers. One window displays file3.js buffer, another window displays file2.js buffer, and another window displays file1.js buffer.

You can have multiple windows displaying the same buffer. While you're on the top left window, type:

:buffer file2.js

Now both two windows are displaying file2.js buffer. If you start typing on a file2.js window, you will see that both windows that display file2.js buffers are being updated in real-time.

To close the current window, you can run Ctrl-W C or type :quit. When you close a window, the buffer will still be there (run :buffers to confirm this).

Here are some useful normal-mode window commands:

Ctrl-W V    Opens a new vertical split
Ctrl-W S    Opens a new horizontal split
Ctrl-W C    Closes a window
Ctrl-W O    Makes the current window the only one on screen and closes other windows

And here is a list of useful window command-line commands:

:vsplit filename    Split window vertically
:split filename     Split window horizontally
:new filename       Create new window

Take your time to understand them. For more, check out :h window.

Tabs

A tab is a collection of windows. Think of it like a layout for windows. In most modern text editors (and modern internet browsers), a tab means an open file / page and when you close it, that file / page goes away. In Vim, a tab does not represent an open file. When you close a tab in Vim, you are not closing a file. You are only closing the layout. The data for those files are stored in-memory in buffers. The buffers are still there.

Let's see Vim tabs in action. Open file1.js:

vim file1.js

To open file2.js in a new tab:

:tabnew file2.js

You can also let Vim autocomplete the file you want to open in a new tab by pressing <Tab> (no pun intended).

Below is a list of useful tab navigations:

:tabnew file.txt    Open file.txt in a new tab
:tabclose           Close the current tab
:tabnext            Go to next tab
:tabprevious        Go to previous tab
:tablast            Go to last tab
:tabfirst           Go to first tab

You can also run gt to go to next tab page (you can go to previous tab with gT). You can pass count as argument to gt, where count is tab number. To go to the third tab, do 3gt.

One advantage of having multiple tabs is you can have different window arrangements in different tabs. Maybe you want your first tab to have 3 vertical windows and second tab to have a mixed horizontal and vertical windows layout. Tab is the perfect tool for the job!

To start Vim with multiple tabs, you can do this from the terminal:

vim -p file1.js file2.js file3.js

Moving in 3D

Moving between windows is like traveling two-dimensionally along X-Y axis in a Cartesian coordinate. You can move to the top, right, bottom, and left window with Ctrl-W H/J/K/L.

Moving between buffers is like traveling across the Z axis in a Cartesian coordinate. Imagine your buffer files lining up across the Z axis. You can traverse the Z axis one buffer at a time with :bnext and :bprevious. You can jump to any coordinate in Z axis with :buffer filename/buffernumber.

You can move in three-dimensional space by combining window and buffer movements. You can move to the top, right, bottom, or left window (X-Y navigations) with window navigations. Since each window contains buffers, you can move forward and backward (Z navigations) with buffer movements.

Using Buffers, Windows, and Tabs the Smart Way

You have learned what buffers, windows, and tabs are and how they work in Vim. Now that you understand them better, you can use them in your own workflow.

Everyone has a different workflow, here is mine for example:

• First I use buffers to store all the required files for the current task. Vim can handle many open buffers before it starts slowing down. Plus having many buffers opened won't crowd my screen. I am only seeing one buffer (assuming I have only one window) at any time, allowing me to focus on one screen. When I need to go somewhere, I can quickly fly to any open buffer anytime.
• I use multiple windows to view multiple buffers at once, usually when diffing files, reading docs, or following a code flow. I try to keep the number of windows opened to no more than three because my screen will get crowded (I use a small laptop). When I am done, I close any extra windows. Fewer windows means less distractions.
• Instead of tabs, I use tmux windows. I usually use multiple tmux windows at once. For example, one tmux window for client-side codes and another for backend codes.

My workflow may look different than yours based on your editing style and that's fine. Experiment around to discover your own flow suited for your coding style.