mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-11-27 23:10:22 +00:00
366 lines
No EOL
10 KiB
C
366 lines
No EOL
10 KiB
C
#pragma once
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include <furi_hal_spi.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define R_REGISTER 0x00
|
|
#define W_REGISTER 0x20
|
|
#define REGISTER_MASK 0x1F
|
|
#define ACTIVATE 0x50
|
|
#define R_RX_PL_WID 0x60
|
|
#define R_RX_PAYLOAD 0x61
|
|
#define W_TX_PAYLOAD 0xA0
|
|
#define W_TX_PAYLOAD_NOACK 0xB0
|
|
#define W_ACK_PAYLOAD 0xA8
|
|
#define FLUSH_TX 0xE1
|
|
#define FLUSH_RX 0xE2
|
|
#define REUSE_TX_PL 0xE3
|
|
#define RF24_NOP 0xFF
|
|
|
|
#define REG_CONFIG 0x00
|
|
#define REG_EN_AA 0x01
|
|
#define REG_EN_RXADDR 0x02
|
|
#define REG_SETUP_AW 0x03
|
|
#define REG_SETUP_RETR 0x04
|
|
#define REG_DYNPD 0x1C
|
|
#define REG_FEATURE 0x1D
|
|
#define REG_RF_SETUP 0x06
|
|
#define REG_STATUS 0x07
|
|
#define REG_RX_ADDR_P0 0x0A
|
|
#define REG_RF_CH 0x05
|
|
#define REG_TX_ADDR 0x10
|
|
|
|
#define RX_PW_P0 0x11
|
|
#define TX_DS 0x20
|
|
#define MAX_RT 0x10
|
|
|
|
#define nrf24_TIMEOUT 500
|
|
#define nrf24_CE_PIN &gpio_ext_pb2
|
|
#define nrf24_HANDLE &furi_hal_spi_bus_handle_external
|
|
|
|
/* Low level API */
|
|
|
|
/** Write device register
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param reg - register
|
|
* @param data - data to write
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_write_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t data);
|
|
|
|
/** Write buffer to device register
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param reg - register
|
|
* @param data - data to write
|
|
* @param size - size of data to write
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_write_buf_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size);
|
|
|
|
/** Read device register
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param reg - register
|
|
* @param[out] data - pointer to data
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_read_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size);
|
|
|
|
/** Power up the radio for operation
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_power_up(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Power down the radio
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_idle(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets the radio to RX mode
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_rx_mode(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets the radio to TX mode
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_tx_mode(FuriHalSpiBusHandle* handle);
|
|
|
|
/*=============================================================================================================*/
|
|
|
|
/* High level API */
|
|
|
|
/** Must call this before using any other nrf24 API
|
|
*
|
|
*/
|
|
void nrf24_init();
|
|
|
|
/** Must call this when we end using nrf24 device
|
|
*
|
|
*/
|
|
void nrf24_deinit();
|
|
|
|
/** Send flush rx command
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_flush_rx(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Send flush tx command
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_flush_tx(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Gets the RX packet length in data pipe 0
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return packet length in data pipe 0
|
|
*/
|
|
uint8_t nrf24_get_packetlen(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets the RX packet length in data pipe 0
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param len - length to set
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_packetlen(FuriHalSpiBusHandle* handle, uint8_t len);
|
|
|
|
/** Gets configured length of MAC address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return MAC address length
|
|
*/
|
|
uint8_t nrf24_get_maclen(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets configured length of MAC address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param maclen - length to set MAC address to, must be greater than 1 and less than 6
|
|
*
|
|
* @return MAC address length
|
|
*/
|
|
uint8_t nrf24_set_maclen(FuriHalSpiBusHandle* handle, uint8_t maclen);
|
|
|
|
/** Gets the current status flags from the STATUS register
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return status flags
|
|
*/
|
|
uint8_t nrf24_status(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Gets the current transfer rate
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return transfer rate in bps
|
|
*/
|
|
uint32_t nrf24_get_rate(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets the transfer rate
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param rate - the transfer rate in bps
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_rate(FuriHalSpiBusHandle* handle, uint32_t rate);
|
|
|
|
/** Gets the current channel
|
|
* In nrf24, the channel number is multiplied times 1MHz and added to 2400MHz to get the frequency
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
*
|
|
* @return channel
|
|
*/
|
|
uint8_t nrf24_get_chan(FuriHalSpiBusHandle* handle);
|
|
|
|
/** Sets the channel
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param frequency - the frequency in hertz
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_chan(FuriHalSpiBusHandle* handle, uint8_t chan);
|
|
|
|
/** Gets the source mac address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param[out] mac - the source mac address
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_get_src_mac(FuriHalSpiBusHandle* handle, uint8_t* mac);
|
|
|
|
/** Sets the source mac address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param mac - the mac address to set
|
|
* @param size - the size of the mac address (2 to 5)
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_src_mac(FuriHalSpiBusHandle* handle, uint8_t* mac, uint8_t size);
|
|
|
|
/** Gets the dest mac address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param[out] mac - the source mac address
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_get_dst_mac(FuriHalSpiBusHandle* handle, uint8_t* mac);
|
|
|
|
/** Sets the dest mac address
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param mac - the mac address to set
|
|
* @param size - the size of the mac address (2 to 5)
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_set_dst_mac(FuriHalSpiBusHandle* handle, uint8_t* mac, uint8_t size);
|
|
|
|
/** Reads RX packet
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param[out] packet - the packet contents
|
|
* @param[out] packetsize - size of the received packet
|
|
* @param full - boolean set to true, packet length is determined by RX_PW_P0 register, false it is determined by dynamic payload length command
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t
|
|
nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* packetsize, bool full);
|
|
|
|
/** Sends TX packet
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param packet - the packet contents
|
|
* @param size - packet size
|
|
* @param ack - boolean to determine whether an ACK is required for the packet or not
|
|
*
|
|
* @return device status
|
|
*/
|
|
uint8_t nrf24_txpacket(FuriHalSpiBusHandle* handle, uint8_t* payload, uint8_t size, bool ack);
|
|
|
|
/** Configure the radio
|
|
* This is not comprehensive, but covers a lot of the common configuration options that may be changed
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param rate - transfer rate in Mbps (1 or 2)
|
|
* @param srcmac - source mac address
|
|
* @param dstmac - destination mac address
|
|
* @param maclen - length of mac address
|
|
* @param channel - channel to tune to
|
|
* @param noack - if true, disable auto-acknowledge
|
|
* @param disable_aa - if true, disable ShockBurst
|
|
*
|
|
*/
|
|
void nrf24_configure(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t rate,
|
|
uint8_t* srcmac,
|
|
uint8_t* dstmac,
|
|
uint8_t maclen,
|
|
uint8_t channel,
|
|
bool noack,
|
|
bool disable_aa);
|
|
|
|
/** Configures the radio for "promiscuous mode" and primes it for rx
|
|
* This is not an actual mode of the nrf24, but this function exploits a few bugs in the chip that allows it to act as if it were.
|
|
* See http://travisgoodspeed.blogspot.com/2011/02/promiscuity-is-nrf24l01s-duty.html for details.
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param channel - channel to tune to
|
|
* @param rate - transfer rate in Mbps (1 or 2)
|
|
*/
|
|
void nrf24_init_promisc_mode(FuriHalSpiBusHandle* handle, uint8_t channel, uint8_t rate);
|
|
|
|
/** Listens for a packet and returns first possible address sniffed
|
|
* Call this only after calling nrf24_init_promisc_mode
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param maclen - length of target mac address
|
|
* @param[out] addresses - sniffed address
|
|
*
|
|
* @return success
|
|
*/
|
|
bool nrf24_sniff_address(FuriHalSpiBusHandle* handle, uint8_t maclen, uint8_t* address);
|
|
|
|
/** Sends ping packet on each channel for designated tx mac looking for ack
|
|
*
|
|
* @param handle - pointer to FuriHalSpiHandle
|
|
* @param srcmac - source address
|
|
* @param dstmac - destination address
|
|
* @param maclen - length of address
|
|
* @param rate - transfer rate in Mbps (1 or 2)
|
|
* @param min_channel - channel to start with
|
|
* @param max_channel - channel to end at
|
|
* @param autoinit - if true, automatically configure radio for this channel
|
|
*
|
|
* @return channel that the address is listening on, if this value is above the max_channel param, it failed
|
|
*/
|
|
uint8_t nrf24_find_channel(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t* srcmac,
|
|
uint8_t* dstmac,
|
|
uint8_t maclen,
|
|
uint8_t rate,
|
|
uint8_t min_channel,
|
|
uint8_t max_channel,
|
|
bool autoinit);
|
|
|
|
/** Converts 64 bit value into uint8_t array
|
|
* @param val - 64-bit integer
|
|
* @param[out] out - bytes out
|
|
* @param bigendian - if true, convert as big endian, otherwise little endian
|
|
*/
|
|
void int64_to_bytes(uint64_t val, uint8_t* out, bool bigendian);
|
|
|
|
/** Converts 32 bit value into uint8_t array
|
|
* @param val - 32-bit integer
|
|
* @param[out] out - bytes out
|
|
* @param bigendian - if true, convert as big endian, otherwise little endian
|
|
*/
|
|
void int32_to_bytes(uint32_t val, uint8_t* out, bool bigendian);
|
|
|
|
/** Converts uint8_t array into 32 bit value
|
|
* @param bytes - uint8_t array
|
|
* @param bigendian - if true, convert as big endian, otherwise little endian
|
|
*
|
|
* @return 32-bit value
|
|
*/
|
|
uint32_t bytes_to_int32(uint8_t* bytes, bool bigendian);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif |