unleashed-firmware/firmware/targets/f7/ble_glue/ble_conf.h
Nikolay Minaylov 2f3ea9494e
HAL to LL migration: GPIO, HSEM, AES ()
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay

Co-authored-by: あく <alleteam@gmail.com>
2022-03-30 18:23:40 +03:00

73 lines
2.5 KiB
C

/**
******************************************************************************
* File Name : App/ble_conf.h
* Description : Configuration file for BLE Middleware.
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef BLE_CONF_H
#define BLE_CONF_H
#include "app_conf.h"
#ifndef __weak
#define __weak __attribute__((weak))
#endif
/******************************************************************************
*
* BLE SERVICES CONFIGURATION
* blesvc
*
******************************************************************************/
/**
* This setting shall be set to '1' if the device needs to support the Peripheral Role
* In the MS configuration, both BLE_CFG_PERIPHERAL and BLE_CFG_CENTRAL shall be set to '1'
*/
#define BLE_CFG_PERIPHERAL 1
/**
* This setting shall be set to '1' if the device needs to support the Central Role
* In the MS configuration, both BLE_CFG_PERIPHERAL and BLE_CFG_CENTRAL shall be set to '1'
*/
#define BLE_CFG_CENTRAL 0
/**
* There is one handler per service enabled
* Note: There is no handler for the Device Information Service
*
* This shall take into account all registered handlers
* (from either the provided services or the custom services)
*/
#define BLE_CFG_SVC_MAX_NBR_CB 7
#define BLE_CFG_CLT_MAX_NBR_CB 0
/******************************************************************************
* GAP Service - Apprearance
******************************************************************************/
#define BLE_CFG_UNKNOWN_APPEARANCE (0)
#define BLE_CFG_GAP_APPEARANCE (0x0086)
/******************************************************************************
* Over The Air Feature (OTA) - STM Proprietary
******************************************************************************/
#define BLE_CFG_OTA_REBOOT_CHAR 0 /**< REBOOT OTA MODE CHARACTERISTIC */
#endif /*BLE_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/