mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-22 18:53:18 +00:00
558fa5670b
* RPC: Update protobuf sources * RPC: Add Virtual Display * Unify log tags * RPC: Virtual Display placeholder * Rpc: clear frame buffer callback before confirm. * Firmware: full assert for hal, move fatfs initialization to furi hal. * FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
278 lines
9.2 KiB
C
278 lines
9.2 KiB
C
#include <furi-hal-rfid.h>
|
|
#include <furi-hal-ibutton.h>
|
|
#include <furi-hal-resources.h>
|
|
|
|
#include <stm32wbxx_ll_tim.h>
|
|
|
|
#define LFRFID_READ_TIM htim1
|
|
#define LFRFID_READ_CHANNEL TIM_CHANNEL_1
|
|
#define LFRFID_EMULATE_TIM htim2
|
|
#define LFRFID_EMULATE_CHANNEL TIM_CHANNEL_3
|
|
|
|
void furi_hal_rfid_init() {
|
|
furi_hal_rfid_pins_reset();
|
|
}
|
|
|
|
void furi_hal_rfid_pins_reset() {
|
|
// ibutton bus disable
|
|
furi_hal_ibutton_stop();
|
|
|
|
// pulldown rfid antenna
|
|
hal_gpio_init(&gpio_rfid_carrier_out, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
|
|
hal_gpio_write(&gpio_rfid_carrier_out, false);
|
|
|
|
// from both sides
|
|
hal_gpio_init(&gpio_rfid_pull, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
|
|
hal_gpio_write(&gpio_rfid_pull, true);
|
|
|
|
hal_gpio_init_simple(&gpio_rfid_carrier, GpioModeAnalog);
|
|
}
|
|
|
|
void furi_hal_rfid_pins_emulate() {
|
|
// ibutton low
|
|
furi_hal_ibutton_start();
|
|
furi_hal_ibutton_pin_low();
|
|
|
|
// pull pin to timer out
|
|
hal_gpio_init_ex(
|
|
&gpio_rfid_pull, GpioModeAltFunctionPushPull, GpioPullNo, GpioSpeedLow, GpioAltFn1TIM2);
|
|
|
|
// pull rfid antenna from carrier side
|
|
hal_gpio_init(&gpio_rfid_carrier_out, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
|
|
hal_gpio_write(&gpio_rfid_carrier_out, false);
|
|
|
|
hal_gpio_init_ex(
|
|
&gpio_rfid_carrier, GpioModeAltFunctionPushPull, GpioPullNo, GpioSpeedLow, GpioAltFn2TIM2);
|
|
}
|
|
|
|
void furi_hal_rfid_pins_read() {
|
|
// ibutton low
|
|
furi_hal_ibutton_start();
|
|
furi_hal_ibutton_pin_low();
|
|
|
|
// dont pull rfid antenna
|
|
hal_gpio_init(&gpio_rfid_pull, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
|
|
hal_gpio_write(&gpio_rfid_pull, false);
|
|
|
|
// carrier pin to timer out
|
|
hal_gpio_init_ex(
|
|
&gpio_rfid_carrier_out,
|
|
GpioModeAltFunctionPushPull,
|
|
GpioPullNo,
|
|
GpioSpeedLow,
|
|
GpioAltFn1TIM1);
|
|
|
|
// comparator in
|
|
hal_gpio_init(&gpio_rfid_data_in, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
|
|
}
|
|
|
|
void furi_hal_rfid_tim_read(float freq, float duty_cycle) {
|
|
// TODO LL init
|
|
uint32_t period = (uint32_t)((SystemCoreClock) / freq) - 1;
|
|
|
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
|
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
|
|
|
// basic PWM setup with needed freq and internal clock
|
|
LFRFID_READ_TIM.Init.Prescaler = 0;
|
|
LFRFID_READ_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
|
|
LFRFID_READ_TIM.Init.Period = period;
|
|
LFRFID_READ_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
|
LFRFID_READ_TIM.Init.RepetitionCounter = 0;
|
|
LFRFID_READ_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
|
if(HAL_TIM_Base_Init(&LFRFID_READ_TIM) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
|
if(HAL_TIM_ConfigClockSource(&LFRFID_READ_TIM, &sClockSourceConfig) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
if(HAL_TIM_PWM_Init(&LFRFID_READ_TIM) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
// no master-slave mode
|
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
|
sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
|
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
|
if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_READ_TIM, &sMasterConfig) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
// pwm config
|
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
|
sConfigOC.Pulse = (uint32_t)(LFRFID_READ_TIM.Init.Period * duty_cycle);
|
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
|
if(HAL_TIM_PWM_ConfigChannel(&LFRFID_READ_TIM, &sConfigOC, LFRFID_READ_CHANNEL) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
// no deadtime
|
|
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
|
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
|
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
|
sBreakDeadTimeConfig.DeadTime = 0;
|
|
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
|
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
|
sBreakDeadTimeConfig.BreakFilter = 0;
|
|
sBreakDeadTimeConfig.BreakAFMode = TIM_BREAK_AFMODE_INPUT;
|
|
sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
|
|
sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
|
|
sBreakDeadTimeConfig.Break2Filter = 0;
|
|
sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
|
|
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
|
if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_READ_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
void furi_hal_rfid_tim_read_start() {
|
|
HAL_TIMEx_PWMN_Start(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
|
|
}
|
|
|
|
void furi_hal_rfid_tim_read_stop() {
|
|
HAL_TIMEx_PWMN_Stop(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
|
|
}
|
|
|
|
void furi_hal_rfid_tim_emulate(float freq) {
|
|
// TODO LL init
|
|
// uint32_t prescaler = (uint32_t)((SystemCoreClock) / freq) - 1;
|
|
|
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
|
|
|
// basic PWM setup with needed freq and internal clock
|
|
LFRFID_EMULATE_TIM.Init.Prescaler = 0;
|
|
LFRFID_EMULATE_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
|
|
LFRFID_EMULATE_TIM.Init.Period = 1;
|
|
LFRFID_EMULATE_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
|
LFRFID_EMULATE_TIM.Init.RepetitionCounter = 0;
|
|
LFRFID_EMULATE_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
|
|
if(HAL_TIM_Base_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_ETRMODE2;
|
|
sClockSourceConfig.ClockPolarity = TIM_ETRPOLARITY_INVERTED;
|
|
sClockSourceConfig.ClockPrescaler = TIM_CLOCKPRESCALER_DIV1;
|
|
sClockSourceConfig.ClockFilter = 0;
|
|
if(HAL_TIM_ConfigClockSource(&LFRFID_EMULATE_TIM, &sClockSourceConfig) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
if(HAL_TIM_PWM_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
// no master-slave mode
|
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
|
sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
|
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
|
if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_EMULATE_TIM, &sMasterConfig) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
// pwm config
|
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
|
sConfigOC.Pulse = 1;
|
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
|
if(HAL_TIM_PWM_ConfigChannel(&LFRFID_EMULATE_TIM, &sConfigOC, LFRFID_EMULATE_CHANNEL) !=
|
|
HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
void furi_hal_rfid_tim_emulate_start() {
|
|
// TODO make api for interrupts priority
|
|
for(size_t i = WWDG_IRQn; i <= DMAMUX1_OVR_IRQn; i++) {
|
|
HAL_NVIC_SetPriority(i, 15, 0);
|
|
}
|
|
|
|
HAL_NVIC_SetPriority(TIM2_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(TIM2_IRQn);
|
|
|
|
HAL_TIM_PWM_Start_IT(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
|
|
HAL_TIM_Base_Start_IT(&LFRFID_EMULATE_TIM);
|
|
}
|
|
|
|
void furi_hal_rfid_tim_emulate_stop() {
|
|
HAL_TIM_Base_Stop(&LFRFID_EMULATE_TIM);
|
|
HAL_TIM_PWM_Stop(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
|
|
}
|
|
|
|
void furi_hal_rfid_tim_reset() {
|
|
HAL_TIM_Base_DeInit(&LFRFID_READ_TIM);
|
|
LL_TIM_DeInit(TIM1);
|
|
LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1);
|
|
HAL_TIM_Base_DeInit(&LFRFID_EMULATE_TIM);
|
|
LL_TIM_DeInit(TIM2);
|
|
LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_TIM2);
|
|
}
|
|
|
|
bool furi_hal_rfid_is_tim_emulate(TIM_HandleTypeDef* hw) {
|
|
return (hw == &LFRFID_EMULATE_TIM);
|
|
}
|
|
|
|
void furi_hal_rfid_set_emulate_period(uint32_t period) {
|
|
LFRFID_EMULATE_TIM.Instance->ARR = period;
|
|
}
|
|
|
|
void furi_hal_rfid_set_emulate_pulse(uint32_t pulse) {
|
|
switch(LFRFID_EMULATE_CHANNEL) {
|
|
case TIM_CHANNEL_1:
|
|
LFRFID_EMULATE_TIM.Instance->CCR1 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_2:
|
|
LFRFID_EMULATE_TIM.Instance->CCR2 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_3:
|
|
LFRFID_EMULATE_TIM.Instance->CCR3 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_4:
|
|
LFRFID_EMULATE_TIM.Instance->CCR4 = pulse;
|
|
break;
|
|
default:
|
|
furi_crash(NULL);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void furi_hal_rfid_set_read_period(uint32_t period) {
|
|
LFRFID_TIM.Instance->ARR = period;
|
|
}
|
|
|
|
void furi_hal_rfid_set_read_pulse(uint32_t pulse) {
|
|
switch(LFRFID_READ_CHANNEL) {
|
|
case TIM_CHANNEL_1:
|
|
LFRFID_TIM.Instance->CCR1 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_2:
|
|
LFRFID_TIM.Instance->CCR2 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_3:
|
|
LFRFID_TIM.Instance->CCR3 = pulse;
|
|
break;
|
|
case TIM_CHANNEL_4:
|
|
LFRFID_TIM.Instance->CCR4 = pulse;
|
|
break;
|
|
default:
|
|
furi_crash(NULL);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void furi_hal_rfid_change_read_config(float freq, float duty_cycle) {
|
|
uint32_t period = (uint32_t)((SystemCoreClock) / freq) - 1;
|
|
furi_hal_rfid_set_read_period(period);
|
|
furi_hal_rfid_set_read_pulse(period * duty_cycle);
|
|
}
|