mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-19 09:13:11 +00:00
8073992925
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
64 lines
2.2 KiB
C
64 lines
2.2 KiB
C
#pragma once
|
|
|
|
#include <stm32wbxx_ll_lptim.h>
|
|
#include <stm32wbxx_ll_bus.h>
|
|
#include <stdint.h>
|
|
|
|
// Timer used for system ticks
|
|
#define FURI_HAL_OS_TIMER_MAX 0xFFFF
|
|
#define FURI_HAL_OS_TIMER_REG_LOAD_DLY 0x1
|
|
#define FURI_HAL_OS_TIMER LPTIM2
|
|
#define FURI_HAL_OS_TIMER_IRQ LPTIM2_IRQn
|
|
|
|
static inline void furi_hal_os_timer_init() {
|
|
// Configure clock source
|
|
LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE_LSE);
|
|
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2);
|
|
// Set interrupt priority and enable them
|
|
NVIC_SetPriority(FURI_HAL_OS_TIMER_IRQ, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 15, 0));
|
|
NVIC_EnableIRQ(FURI_HAL_OS_TIMER_IRQ);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_continuous(uint32_t count) {
|
|
// Enable timer
|
|
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
|
|
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER));
|
|
|
|
// Enable rutoreload match interrupt
|
|
LL_LPTIM_EnableIT_ARRM(FURI_HAL_OS_TIMER);
|
|
|
|
// Set autoreload and start counter
|
|
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
|
|
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_CONTINUOUS);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_single(uint32_t count) {
|
|
// Enable timer
|
|
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
|
|
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER));
|
|
|
|
// Enable compare match interrupt
|
|
LL_LPTIM_EnableIT_CMPM(FURI_HAL_OS_TIMER);
|
|
|
|
// Set compare, autoreload and start counter
|
|
// Include some marging to workaround ARRM behaviour
|
|
LL_LPTIM_SetCompare(FURI_HAL_OS_TIMER, count-3);
|
|
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
|
|
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_ONESHOT);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_reset() {
|
|
// Hard reset timer
|
|
// THE ONLY RELIABLEWAY to stop it according to errata
|
|
LL_LPTIM_DeInit(FURI_HAL_OS_TIMER);
|
|
}
|
|
|
|
static inline uint32_t furi_hal_os_timer_get_cnt() {
|
|
uint32_t counter = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
uint32_t counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
while(counter != counter_shadow) {
|
|
counter = counter_shadow;
|
|
counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
}
|
|
return counter;
|
|
}
|