mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-11-30 16:29:12 +00:00
bff5921266
* FuriHal: always clock SMPS from HSI * FuriHal: add clock startup time check, ensure that we conform to core2 config value * FuriHal: set sleep mode to legacy if clock startup time is too high --------- Co-authored-by: hedger <hedger@users.noreply.github.com>
242 lines
7.2 KiB
C
242 lines
7.2 KiB
C
#include <furi_hal_clock.h>
|
|
#include <furi_hal_resources.h>
|
|
#include <furi_hal_rtc.h>
|
|
#include <furi.h>
|
|
|
|
#include <stm32wbxx_ll_pwr.h>
|
|
#include <stm32wbxx_ll_rcc.h>
|
|
#include <stm32wbxx_ll_utils.h>
|
|
#include <stm32wbxx_ll_cortex.h>
|
|
|
|
#define TAG "FuriHalClock"
|
|
|
|
#define CPU_CLOCK_HZ_EARLY 4000000
|
|
#define CPU_CLOCK_HZ_MAIN 64000000
|
|
#define TICK_INT_PRIORITY 15U
|
|
#define HS_CLOCK_IS_READY() (LL_RCC_HSE_IsReady() && LL_RCC_HSI_IsReady())
|
|
#define LS_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())
|
|
|
|
void furi_hal_clock_init_early() {
|
|
LL_SetSystemCoreClock(CPU_CLOCK_HZ_EARLY);
|
|
LL_Init1msTick(SystemCoreClock);
|
|
}
|
|
|
|
void furi_hal_clock_deinit_early() {
|
|
}
|
|
|
|
void furi_hal_clock_init() {
|
|
/* Prepare Flash memory for 64MHz system clock */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
|
|
while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_3)
|
|
;
|
|
|
|
/* HSE and HSI configuration and activation */
|
|
LL_RCC_HSE_SetCapacitorTuning(0x26);
|
|
LL_RCC_HSE_Enable();
|
|
LL_RCC_HSI_Enable();
|
|
while(!HS_CLOCK_IS_READY())
|
|
;
|
|
/* Select HSI as system clock source after Wake Up from Stop mode
|
|
* Must be set before enabling CSS */
|
|
LL_RCC_SetClkAfterWakeFromStop(LL_RCC_STOP_WAKEUPCLOCK_HSI);
|
|
|
|
LL_RCC_HSE_EnableCSS();
|
|
|
|
/* LSE and LSI1 configuration and activation */
|
|
LL_PWR_EnableBkUpAccess();
|
|
LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
|
|
LL_RCC_LSE_Enable();
|
|
LL_RCC_LSI1_Enable();
|
|
while(!LS_CLOCK_IS_READY())
|
|
;
|
|
|
|
/* RF wakeup */
|
|
LL_RCC_SetRFWKPClockSource(LL_RCC_RFWKP_CLKSOURCE_LSE);
|
|
|
|
LL_EXTI_EnableIT_0_31(
|
|
LL_EXTI_LINE_18); /* Why? Because that's why. See RM0434, Table 61. CPU1 vector table. */
|
|
LL_EXTI_EnableRisingTrig_0_31(LL_EXTI_LINE_18);
|
|
LL_RCC_EnableIT_LSECSS();
|
|
/* ES0394, extended case of 2.2.2 */
|
|
if(!LL_RCC_IsActiveFlag_BORRST()) {
|
|
LL_RCC_LSE_EnableCSS();
|
|
}
|
|
|
|
/* Main PLL configuration and activation */
|
|
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 8, LL_RCC_PLLR_DIV_2);
|
|
LL_RCC_PLL_Enable();
|
|
LL_RCC_PLL_EnableDomain_SYS();
|
|
while(LL_RCC_PLL_IsReady() != 1)
|
|
;
|
|
|
|
LL_RCC_PLLSAI1_ConfigDomain_48M(
|
|
LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 6, LL_RCC_PLLSAI1Q_DIV_2);
|
|
LL_RCC_PLLSAI1_ConfigDomain_ADC(
|
|
LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 6, LL_RCC_PLLSAI1R_DIV_2);
|
|
LL_RCC_PLLSAI1_Enable();
|
|
LL_RCC_PLLSAI1_EnableDomain_48M();
|
|
LL_RCC_PLLSAI1_EnableDomain_ADC();
|
|
while(LL_RCC_PLLSAI1_IsReady() != 1)
|
|
;
|
|
|
|
/* Sysclk activation on the main PLL */
|
|
/* Set CPU1 prescaler*/
|
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
|
|
|
/* Set CPU2 prescaler*/
|
|
LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_2);
|
|
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
|
|
;
|
|
|
|
/* Set AHB SHARED prescaler*/
|
|
LL_RCC_SetAHB4Prescaler(LL_RCC_SYSCLK_DIV_1);
|
|
|
|
/* Set APB1 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
|
|
|
|
/* Set APB2 prescaler*/
|
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
|
|
|
/* Disable MSI */
|
|
LL_RCC_MSI_Disable();
|
|
while(LL_RCC_MSI_IsReady() != 0)
|
|
;
|
|
|
|
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
|
LL_SetSystemCoreClock(CPU_CLOCK_HZ_MAIN);
|
|
|
|
/* Update the time base */
|
|
LL_Init1msTick(SystemCoreClock);
|
|
LL_SYSTICK_EnableIT();
|
|
NVIC_SetPriority(
|
|
SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TICK_INT_PRIORITY, 0));
|
|
NVIC_EnableIRQ(SysTick_IRQn);
|
|
|
|
LL_RCC_SetCLK48ClockSource(LL_RCC_CLK48_CLKSOURCE_PLLSAI1);
|
|
LL_RCC_HSI_EnableInStopMode(); // Ensure that MR is capable of work in STOP0
|
|
LL_RCC_SetSMPSClockSource(LL_RCC_SMPS_CLKSOURCE_HSI);
|
|
LL_RCC_SetSMPSPrescaler(LL_RCC_SMPS_DIV_1);
|
|
LL_RCC_SetRFWKPClockSource(LL_RCC_RFWKP_CLKSOURCE_LSE);
|
|
|
|
FURI_LOG_I(TAG, "Init OK");
|
|
}
|
|
|
|
void furi_hal_clock_switch_to_hsi() {
|
|
LL_RCC_HSI_Enable();
|
|
|
|
while(!LL_RCC_HSI_IsReady())
|
|
;
|
|
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI);
|
|
furi_assert(LL_RCC_GetSMPSClockSource() == LL_RCC_SMPS_CLKSOURCE_HSI);
|
|
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)
|
|
;
|
|
|
|
LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
|
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
|
|
while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_0)
|
|
;
|
|
}
|
|
|
|
void furi_hal_clock_switch_to_pll() {
|
|
uint32_t clock_start_time = DWT->CYCCNT;
|
|
LL_RCC_HSE_Enable();
|
|
LL_RCC_PLL_Enable();
|
|
LL_RCC_PLLSAI1_Enable();
|
|
|
|
while(!LL_RCC_HSE_IsReady())
|
|
;
|
|
while(!LL_RCC_PLL_IsReady())
|
|
;
|
|
while(!LL_RCC_PLLSAI1_IsReady())
|
|
;
|
|
|
|
LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_2);
|
|
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
|
|
while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_3)
|
|
;
|
|
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
|
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
|
|
;
|
|
|
|
uint32_t total = DWT->CYCCNT - clock_start_time;
|
|
if(total > (20 * 0x148)) {
|
|
furi_hal_rtc_set_flag(FuriHalRtcFlagLegacySleep);
|
|
furi_crash("Slow HSE/PLL startup");
|
|
}
|
|
}
|
|
|
|
void furi_hal_clock_suspend_tick() {
|
|
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_ENABLE_Msk);
|
|
}
|
|
|
|
void furi_hal_clock_resume_tick() {
|
|
SET_BIT(SysTick->CTRL, SysTick_CTRL_ENABLE_Msk);
|
|
}
|
|
|
|
void furi_hal_clock_mco_enable(FuriHalClockMcoSourceId source, FuriHalClockMcoDivisorId div) {
|
|
if(source == FuriHalClockMcoLse) {
|
|
LL_RCC_ConfigMCO(LL_RCC_MCO1SOURCE_LSE, div);
|
|
} else if(source == FuriHalClockMcoSysclk) {
|
|
LL_RCC_ConfigMCO(LL_RCC_MCO1SOURCE_SYSCLK, div);
|
|
} else {
|
|
LL_RCC_MSI_Enable();
|
|
while(LL_RCC_MSI_IsReady() != 1)
|
|
;
|
|
switch(source) {
|
|
case FuriHalClockMcoMsi100k:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_0);
|
|
break;
|
|
case FuriHalClockMcoMsi200k:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_1);
|
|
break;
|
|
case FuriHalClockMcoMsi400k:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_2);
|
|
break;
|
|
case FuriHalClockMcoMsi800k:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_3);
|
|
break;
|
|
case FuriHalClockMcoMsi1m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_4);
|
|
break;
|
|
case FuriHalClockMcoMsi2m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_5);
|
|
break;
|
|
case FuriHalClockMcoMsi4m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
|
|
break;
|
|
case FuriHalClockMcoMsi8m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_7);
|
|
break;
|
|
case FuriHalClockMcoMsi16m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_8);
|
|
break;
|
|
case FuriHalClockMcoMsi24m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_9);
|
|
break;
|
|
case FuriHalClockMcoMsi32m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_10);
|
|
break;
|
|
case FuriHalClockMcoMsi48m:
|
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_11);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
LL_RCC_ConfigMCO(LL_RCC_MCO1SOURCE_MSI, div);
|
|
}
|
|
}
|
|
|
|
void furi_hal_clock_mco_disable() {
|
|
LL_RCC_ConfigMCO(LL_RCC_MCO1SOURCE_NOCLOCK, FuriHalClockMcoDiv1);
|
|
LL_RCC_MSI_Disable();
|
|
while(LL_RCC_MSI_IsReady() != 0)
|
|
;
|
|
}
|