mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-20 01:33:18 +00:00
88cee4601a
* [FL-1885] USB-UART: app and worker * [FL-1885] USB-UART: UART on CDC0 Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
105 lines
3.6 KiB
C
105 lines
3.6 KiB
C
#include <furi-hal-lpuart.h>
|
|
#include <stdbool.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
#include <stm32wbxx_ll_lpuart.h>
|
|
|
|
#include <furi.h>
|
|
|
|
static void (*irq_cb)(uint8_t ev, uint8_t data);
|
|
|
|
void furi_hal_lpuart_init() {
|
|
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
GPIO_InitStruct.Pin = PC0_Pin|PC1_Pin;
|
|
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
|
|
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
|
|
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
|
GPIO_InitStruct.Alternate = LL_GPIO_AF_8;
|
|
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
LL_RCC_SetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE_PCLK1);
|
|
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPUART1);
|
|
|
|
LL_LPUART_InitTypeDef LPUART_InitStruct = {0};
|
|
LPUART_InitStruct.PrescalerValue = LL_LPUART_PRESCALER_DIV1;
|
|
LPUART_InitStruct.BaudRate = 115200;
|
|
LPUART_InitStruct.DataWidth = LL_LPUART_DATAWIDTH_8B;
|
|
LPUART_InitStruct.StopBits = LL_LPUART_STOPBITS_1;
|
|
LPUART_InitStruct.Parity = LL_LPUART_PARITY_NONE;
|
|
LPUART_InitStruct.TransferDirection = LL_LPUART_DIRECTION_TX_RX;
|
|
LPUART_InitStruct.HardwareFlowControl = LL_LPUART_HWCONTROL_NONE;
|
|
LL_LPUART_Init(LPUART1, &LPUART_InitStruct);
|
|
LL_LPUART_SetTXFIFOThreshold(LPUART1, LL_LPUART_FIFOTHRESHOLD_1_8);
|
|
LL_LPUART_SetRXFIFOThreshold(LPUART1, LL_LPUART_FIFOTHRESHOLD_1_8);
|
|
LL_LPUART_EnableFIFO(LPUART1);
|
|
|
|
LL_LPUART_Enable(LPUART1);
|
|
|
|
while((!(LL_LPUART_IsActiveFlag_TEACK(LPUART1))) || (!(LL_LPUART_IsActiveFlag_REACK(LPUART1))));
|
|
|
|
LL_LPUART_EnableIT_RXNE_RXFNE(LPUART1);
|
|
LL_LPUART_EnableIT_IDLE(LPUART1);
|
|
HAL_NVIC_SetPriority(LPUART1_IRQn, 5, 0);
|
|
|
|
FURI_LOG_I("FuriHalLpUart", "Init OK");
|
|
}
|
|
|
|
void furi_hal_lpuart_set_br(uint32_t baud) {
|
|
if (LL_LPUART_IsEnabled(LPUART1)) {
|
|
// Wait for transfer complete flag
|
|
while (!LL_LPUART_IsActiveFlag_TC(LPUART1));
|
|
LL_LPUART_Disable(LPUART1);
|
|
uint32_t uartclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_GetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE_PCLK1));
|
|
if (uartclk/baud > 4095) {
|
|
LL_LPUART_SetPrescaler(LPUART1, LL_LPUART_PRESCALER_DIV32);
|
|
LL_LPUART_SetBaudRate(LPUART1, uartclk, LL_LPUART_PRESCALER_DIV32, baud);
|
|
} else {
|
|
LL_LPUART_SetPrescaler(LPUART1, LL_LPUART_PRESCALER_DIV1);
|
|
LL_LPUART_SetBaudRate(LPUART1, uartclk, LL_LPUART_PRESCALER_DIV1, baud);
|
|
}
|
|
|
|
LL_LPUART_Enable(LPUART1);
|
|
}
|
|
}
|
|
|
|
void furi_hal_lpuart_deinit() {
|
|
furi_hal_lpuart_set_irq_cb(NULL);
|
|
LL_GPIO_SetPinMode(GPIOC, PC0_Pin, LL_GPIO_MODE_ANALOG);
|
|
LL_GPIO_SetPinMode(GPIOC, PC1_Pin, LL_GPIO_MODE_ANALOG);
|
|
LL_LPUART_Disable(LPUART1);
|
|
LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPUART1);
|
|
}
|
|
|
|
void furi_hal_lpuart_tx(const uint8_t* buffer, size_t buffer_size) {
|
|
if (LL_LPUART_IsEnabled(LPUART1) == 0)
|
|
return;
|
|
|
|
while(buffer_size > 0) {
|
|
while (!LL_LPUART_IsActiveFlag_TXE(LPUART1));
|
|
|
|
LL_LPUART_TransmitData8(LPUART1, *buffer);
|
|
|
|
buffer++;
|
|
buffer_size--;
|
|
}
|
|
}
|
|
|
|
void furi_hal_lpuart_set_irq_cb(void (*cb)(UartIrqEvent ev, uint8_t data)) {
|
|
irq_cb = cb;
|
|
if (irq_cb == NULL)
|
|
NVIC_DisableIRQ(LPUART1_IRQn);
|
|
else
|
|
NVIC_EnableIRQ(LPUART1_IRQn);
|
|
}
|
|
|
|
void LPUART1_IRQHandler(void) {
|
|
if (LL_LPUART_IsActiveFlag_RXNE_RXFNE(LPUART1)) {
|
|
uint8_t data = LL_LPUART_ReceiveData8(LPUART1);
|
|
irq_cb(UartIrqEventRXNE, data);
|
|
} else if (LL_LPUART_IsActiveFlag_IDLE(LPUART1)) {
|
|
irq_cb(UartIrqEventIDLE, 0);
|
|
LL_LPUART_ClearFlag_IDLE(LPUART1);
|
|
}
|
|
|
|
//TODO: more events
|
|
}
|