unleashed-firmware/lib/ST25RFAL002/source/st25r3916/st25r3916_com.c
あく 389ff92cc1
Naming and coding style convention, new linter tool. ()
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

617 lines
20 KiB
C

/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R3916 firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file
*
* \author Gustavo Patricio
*
* \brief Implementation of ST25R3916 communication
*
*/
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "st25r3916.h"
#include "st25r3916_com.h"
#include "st25r3916_led.h"
#include "st_errno.h"
#include "platform.h"
#include "utils.h"
/*
******************************************************************************
* LOCAL DEFINES
******************************************************************************
*/
#define ST25R3916_OPTIMIZE \
true /*!< Optimization switch: false always write value to register */
#define ST25R3916_I2C_ADDR \
(0xA0U >> 1) /*!< ST25R3916's default I2C address */
#define ST25R3916_REG_LEN 1U /*!< Byte length of a ST25R3916 register */
#define ST25R3916_WRITE_MODE \
(0U << 6) /*!< ST25R3916 Operation Mode: Write */
#define ST25R3916_READ_MODE \
(1U << 6) /*!< ST25R3916 Operation Mode: Read */
#define ST25R3916_CMD_MODE \
(3U << 6) /*!< ST25R3916 Operation Mode: Direct Command */
#define ST25R3916_FIFO_LOAD \
(0x80U) /*!< ST25R3916 Operation Mode: FIFO Load */
#define ST25R3916_FIFO_READ \
(0x9FU) /*!< ST25R3916 Operation Mode: FIFO Read */
#define ST25R3916_PT_A_CONFIG_LOAD \
(0xA0U) /*!< ST25R3916 Operation Mode: Passive Target Memory A-Config Load */
#define ST25R3916_PT_F_CONFIG_LOAD \
(0xA8U) /*!< ST25R3916 Operation Mode: Passive Target Memory F-Config Load */
#define ST25R3916_PT_TSN_DATA_LOAD \
(0xACU) /*!< ST25R3916 Operation Mode: Passive Target Memory TSN Load */
#define ST25R3916_PT_MEM_READ \
(0xBFU) /*!< ST25R3916 Operation Mode: Passive Target Memory Read */
#define ST25R3916_CMD_LEN \
(1U) /*!< ST25R3916 CMD length */
#define ST25R3916_BUF_LEN \
(ST25R3916_CMD_LEN + \
ST25R3916_FIFO_DEPTH) /*!< ST25R3916 communication buffer: CMD + FIFO length */
/*
******************************************************************************
* MACROS
******************************************************************************
*/
#ifdef RFAL_USE_I2C
#define st25r3916I2CStart() \
platformI2CStart() /*!< ST25R3916 HAL I2C driver macro to start a I2C transfer */
#define st25r3916I2CStop() \
platformI2CStop() /*!< ST25R3916 HAL I2C driver macro to stop a I2C transfer */
#define st25r3916I2CRepeatStart() \
platformI2CRepeatStart() /*!< ST25R3916 HAL I2C driver macro to repeat Start */
#define st25r3916I2CSlaveAddrWR(sA) \
platformI2CSlaveAddrWR( \
sA) /*!< ST25R3916 HAL I2C driver macro to repeat Start */
#define st25r3916I2CSlaveAddrRD(sA) \
platformI2CSlaveAddrRD( \
sA) /*!< ST25R3916 HAL I2C driver macro to repeat Start */
#endif /* RFAL_USE_I2C */
#if defined(ST25R_COM_SINGLETXRX) && !defined(RFAL_USE_I2C)
static uint8_t
comBuf[ST25R3916_BUF_LEN]; /*!< ST25R3916 communication buffer */
static uint16_t comBufIt; /*!< ST25R3916 communication buffer iterator */
#endif /* ST25R_COM_SINGLETXRX */
/*
******************************************************************************
* LOCAL FUNCTION PROTOTYPES
******************************************************************************
*/
/*!
******************************************************************************
* \brief ST25R3916 communication Start
*
* This method performs the required actions to start communications with
* ST25R3916, either by SPI or I2C
******************************************************************************
*/
static void st25r3916comStart(void);
/*!
******************************************************************************
* \brief ST25R3916 communication Stop
*
* This method performs the required actions to terminate communications with
* ST25R3916, either by SPI or I2C
******************************************************************************
*/
static void st25r3916comStop(void);
/*!
******************************************************************************
* \brief ST25R3916 communication Repeat Start
*
* This method performs the required actions to repeat start a transmission
* with ST25R3916, either by SPI or I2C
******************************************************************************
*/
#ifdef RFAL_USE_I2C
static void st25r3916comRepeatStart(void);
#else
#define st25r3916comRepeatStart()
#endif /* RFAL_USE_I2C */
/*!
******************************************************************************
* \brief ST25R3916 communication Tx
*
* This method performs the required actions to transmit the given buffer
* to ST25R3916, either by SPI or I2C
*
* \param[in] txBuf : the buffer to transmit
* \param[in] txLen : the length of the buffer to transmit
* \param[in] last : true if last data to be transmitted
* \param[in] txOnly : true no reception is to be performed
*
******************************************************************************
*/
static void st25r3916comTx(const uint8_t* txBuf, uint16_t txLen, bool last, bool txOnly);
/*!
******************************************************************************
* \brief ST25R3916 communication Rx
*
* This method performs the required actions to receive from ST25R3916 the given
* amount of bytes, either by SPI or I2C
*
* \param[out] rxBuf : the buffer place the received bytes
* \param[in] rxLen : the length to receive
*
******************************************************************************
*/
static void st25r3916comRx(uint8_t* rxBuf, uint16_t rxLen);
/*!
******************************************************************************
* \brief ST25R3916 communication Tx Byte
*
* This helper method transmits a byte passed by value and not by reference
*
* \param[in] txByte : the value of the byte to be transmitted
* \param[in] last : true if last byte to be transmitted
* \param[in] txOnly : true no reception is to be performed
*
******************************************************************************
*/
static void st25r3916comTxByte(uint8_t txByte, bool last, bool txOnly);
/*
******************************************************************************
* LOCAL FUNCTION
******************************************************************************
*/
static void st25r3916comStart(void) {
/* Make this operation atomic, disabling ST25R3916 interrupt during communications*/
platformProtectST25RComm();
#ifdef RFAL_USE_I2C
/* I2C Start and send Slave Address */
st25r3916I2CStart();
st25r3916I2CSlaveAddrWR(ST25R3916_I2C_ADDR);
#else
/* Perform the chip select */
platformSpiSelect();
#if defined(ST25R_COM_SINGLETXRX)
comBufIt = 0; /* reset local buffer position */
#endif /* ST25R_COM_SINGLETXRX */
#endif /* RFAL_USE_I2C */
}
/*******************************************************************************/
static void st25r3916comStop(void) {
#ifdef RFAL_USE_I2C
/* Generate Stop signal */
st25r3916I2CStop();
#else
/* Release the chip select */
platformSpiDeselect();
#endif /* RFAL_USE_I2C */
/* reEnable the ST25R3916 interrupt */
platformUnprotectST25RComm();
}
/*******************************************************************************/
#ifdef RFAL_USE_I2C
static void st25r3916comRepeatStart(void) {
st25r3916I2CRepeatStart();
st25r3916I2CSlaveAddrRD(ST25R3916_I2C_ADDR);
}
#endif /* RFAL_USE_I2C */
/*******************************************************************************/
static void st25r3916comTx(const uint8_t* txBuf, uint16_t txLen, bool last, bool txOnly) {
NO_WARNING(last);
NO_WARNING(txOnly);
if(txLen > 0U) {
#ifdef RFAL_USE_I2C
platformI2CTx(txBuf, txLen, last, txOnly);
#else /* RFAL_USE_I2C */
#ifdef ST25R_COM_SINGLETXRX
ST_MEMCPY(
&comBuf[comBufIt],
txBuf,
MIN(txLen,
(ST25R3916_BUF_LEN -
comBufIt))); /* copy tx data to local buffer */
comBufIt +=
MIN(txLen,
(ST25R3916_BUF_LEN -
comBufIt)); /* store position on local buffer */
if(last && txOnly) /* only perform SPI transaction if no Rx will follow */
{
platformSpiTxRx(comBuf, NULL, comBufIt);
}
#else
platformSpiTxRx(txBuf, NULL, txLen);
#endif /* ST25R_COM_SINGLETXRX */
#endif /* RFAL_USE_I2C */
}
}
/*******************************************************************************/
static void st25r3916comRx(uint8_t* rxBuf, uint16_t rxLen) {
if(rxLen > 0U) {
#ifdef RFAL_USE_I2C
platformI2CRx(rxBuf, rxLen);
#else /* RFAL_USE_I2C */
#ifdef ST25R_COM_SINGLETXRX
ST_MEMSET(
&comBuf[comBufIt],
0x00,
MIN(rxLen,
(ST25R3916_BUF_LEN -
comBufIt))); /* clear outgoing buffer */
platformSpiTxRx(
comBuf,
comBuf,
MIN((comBufIt + rxLen),
ST25R3916_BUF_LEN)); /* transceive as a single SPI call */
ST_MEMCPY(
rxBuf,
&comBuf[comBufIt],
MIN(rxLen,
(ST25R3916_BUF_LEN -
comBufIt))); /* copy from local buf to output buffer and skip cmd byte */
#else
if(rxBuf != NULL) {
ST_MEMSET(
rxBuf, 0x00, rxLen); /* clear outgoing buffer */
}
platformSpiTxRx(NULL, rxBuf, rxLen);
#endif /* ST25R_COM_SINGLETXRX */
#endif /* RFAL_USE_I2C */
}
}
/*******************************************************************************/
static void st25r3916comTxByte(uint8_t txByte, bool last, bool txOnly) {
uint8_t val = txByte; /* MISRA 17.8: use intermediate variable */
st25r3916comTx(&val, ST25R3916_REG_LEN, last, txOnly);
}
/*
******************************************************************************
* GLOBAL FUNCTIONS
******************************************************************************
*/
/*******************************************************************************/
ReturnCode st25r3916ReadRegister(uint8_t reg, uint8_t* val) {
return st25r3916ReadMultipleRegisters(reg, val, ST25R3916_REG_LEN);
}
/*******************************************************************************/
ReturnCode st25r3916ReadMultipleRegisters(uint8_t reg, uint8_t* values, uint8_t length) {
if(length > 0U) {
st25r3916comStart();
/* If is a space-B register send a direct command first */
if((reg & ST25R3916_SPACE_B) != 0U) {
st25r3916comTxByte(ST25R3916_CMD_SPACE_B_ACCESS, false, false);
}
st25r3916comTxByte(((reg & ~ST25R3916_SPACE_B) | ST25R3916_READ_MODE), true, false);
st25r3916comRepeatStart();
st25r3916comRx(values, length);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WriteRegister(uint8_t reg, uint8_t val) {
uint8_t value = val; /* MISRA 17.8: use intermediate variable */
return st25r3916WriteMultipleRegisters(reg, &value, ST25R3916_REG_LEN);
}
/*******************************************************************************/
ReturnCode st25r3916WriteMultipleRegisters(uint8_t reg, const uint8_t* values, uint8_t length) {
if(length > 0U) {
st25r3916comStart();
if((reg & ST25R3916_SPACE_B) != 0U) {
st25r3916comTxByte(ST25R3916_CMD_SPACE_B_ACCESS, false, true);
}
st25r3916comTxByte(((reg & ~ST25R3916_SPACE_B) | ST25R3916_WRITE_MODE), false, true);
st25r3916comTx(values, length, true, true);
st25r3916comStop();
/* Send a WriteMultiReg event to LED handling */
st25r3916ledEvtWrMultiReg(reg, values, length);
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WriteFifo(const uint8_t* values, uint16_t length) {
if(length > ST25R3916_FIFO_DEPTH) {
return ERR_PARAM;
}
if(length > 0U) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_FIFO_LOAD, false, true);
st25r3916comTx(values, length, true, true);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916ReadFifo(uint8_t* buf, uint16_t length) {
if(length > 0U) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_FIFO_READ, true, false);
st25r3916comRepeatStart();
st25r3916comRx(buf, length);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WritePTMem(const uint8_t* values, uint16_t length) {
if(length > ST25R3916_PTM_LEN) {
return ERR_PARAM;
}
if(length > 0U) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_PT_A_CONFIG_LOAD, false, true);
st25r3916comTx(values, length, true, true);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916ReadPTMem(uint8_t* values, uint16_t length) {
uint8_t
tmp[ST25R3916_REG_LEN +
ST25R3916_PTM_LEN]; /* local buffer to handle prepended byte on I2C and SPI */
if(length > 0U) {
if(length > ST25R3916_PTM_LEN) {
return ERR_PARAM;
}
st25r3916comStart();
st25r3916comTxByte(ST25R3916_PT_MEM_READ, true, false);
st25r3916comRepeatStart();
st25r3916comRx(tmp, (ST25R3916_REG_LEN + length)); /* skip prepended byte */
st25r3916comStop();
/* Copy PTMem content without prepended byte */
ST_MEMCPY(values, (tmp + ST25R3916_REG_LEN), length);
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WritePTMemF(const uint8_t* values, uint16_t length) {
if(length > (ST25R3916_PTM_F_LEN + ST25R3916_PTM_TSN_LEN)) {
return ERR_PARAM;
}
if(length > 0U) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_PT_F_CONFIG_LOAD, false, true);
st25r3916comTx(values, length, true, true);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WritePTMemTSN(const uint8_t* values, uint16_t length) {
if(length > ST25R3916_PTM_TSN_LEN) {
return ERR_PARAM;
}
if(length > 0U) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_PT_TSN_DATA_LOAD, false, true);
st25r3916comTx(values, length, true, true);
st25r3916comStop();
}
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916ExecuteCommand(uint8_t cmd) {
st25r3916comStart();
st25r3916comTxByte((cmd | ST25R3916_CMD_MODE), true, true);
st25r3916comStop();
/* Send a cmd event to LED handling */
st25r3916ledEvtCmd(cmd);
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916ReadTestRegister(uint8_t reg, uint8_t* val) {
st25r3916comStart();
st25r3916comTxByte(ST25R3916_CMD_TEST_ACCESS, false, false);
st25r3916comTxByte((reg | ST25R3916_READ_MODE), true, false);
st25r3916comRepeatStart();
st25r3916comRx(val, ST25R3916_REG_LEN);
st25r3916comStop();
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916WriteTestRegister(uint8_t reg, uint8_t val) {
uint8_t value = val; /* MISRA 17.8: use intermediate variable */
st25r3916comStart();
st25r3916comTxByte(ST25R3916_CMD_TEST_ACCESS, false, true);
st25r3916comTxByte((reg | ST25R3916_WRITE_MODE), false, true);
st25r3916comTx(&value, ST25R3916_REG_LEN, true, true);
st25r3916comStop();
return ERR_NONE;
}
/*******************************************************************************/
ReturnCode st25r3916ClrRegisterBits(uint8_t reg, uint8_t clr_mask) {
ReturnCode ret;
uint8_t rdVal;
/* Read current reg value */
EXIT_ON_ERR(ret, st25r3916ReadRegister(reg, &rdVal));
/* Only perform a Write if value to be written is different */
if(ST25R3916_OPTIMIZE && (rdVal == (uint8_t)(rdVal & ~clr_mask))) {
return ERR_NONE;
}
/* Write new reg value */
return st25r3916WriteRegister(reg, (uint8_t)(rdVal & ~clr_mask));
}
/*******************************************************************************/
ReturnCode st25r3916SetRegisterBits(uint8_t reg, uint8_t set_mask) {
ReturnCode ret;
uint8_t rdVal;
/* Read current reg value */
EXIT_ON_ERR(ret, st25r3916ReadRegister(reg, &rdVal));
/* Only perform a Write if the value to be written is different */
if(ST25R3916_OPTIMIZE && (rdVal == (rdVal | set_mask))) {
return ERR_NONE;
}
/* Write new reg value */
return st25r3916WriteRegister(reg, (rdVal | set_mask));
}
/*******************************************************************************/
ReturnCode st25r3916ChangeRegisterBits(uint8_t reg, uint8_t valueMask, uint8_t value) {
return st25r3916ModifyRegister(reg, valueMask, (valueMask & value));
}
/*******************************************************************************/
ReturnCode st25r3916ModifyRegister(uint8_t reg, uint8_t clr_mask, uint8_t set_mask) {
ReturnCode ret;
uint8_t rdVal;
uint8_t wrVal;
/* Read current reg value */
EXIT_ON_ERR(ret, st25r3916ReadRegister(reg, &rdVal));
/* Compute new value */
wrVal = (uint8_t)(rdVal & ~clr_mask);
wrVal |= set_mask;
/* Only perform a Write if the value to be written is different */
if(ST25R3916_OPTIMIZE && (rdVal == wrVal)) {
return ERR_NONE;
}
/* Write new reg value */
return st25r3916WriteRegister(reg, wrVal);
}
/*******************************************************************************/
ReturnCode st25r3916ChangeTestRegisterBits(uint8_t reg, uint8_t valueMask, uint8_t value) {
ReturnCode ret;
uint8_t rdVal;
uint8_t wrVal;
/* Read current reg value */
EXIT_ON_ERR(ret, st25r3916ReadTestRegister(reg, &rdVal));
/* Compute new value */
wrVal = (uint8_t)(rdVal & ~valueMask);
wrVal |= (uint8_t)(value & valueMask);
/* Only perform a Write if the value to be written is different */
if(ST25R3916_OPTIMIZE && (rdVal == wrVal)) {
return ERR_NONE;
}
/* Write new reg value */
return st25r3916WriteTestRegister(reg, wrVal);
}
/*******************************************************************************/
bool st25r3916CheckReg(uint8_t reg, uint8_t mask, uint8_t val) {
uint8_t regVal;
regVal = 0;
st25r3916ReadRegister(reg, &regVal);
return ((regVal & mask) == val);
}
/*******************************************************************************/
bool st25r3916IsRegValid(uint8_t reg) {
if(!(((int16_t)reg >= (int16_t)ST25R3916_REG_IO_CONF1) &&
(reg <= (ST25R3916_SPACE_B | ST25R3916_REG_IC_IDENTITY)))) {
return false;
}
return true;
}