mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-29 22:23:06 +00:00
76e3fd3060
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
251 lines
8 KiB
C
251 lines
8 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32_adafruit_sd.h
|
|
* @author MCD Application Team
|
|
* @version V3.0.0
|
|
* @date 23-December-2016
|
|
* @brief This file contains the common defines and functions prototypes for
|
|
* the stm32_adafruit_sd.c driver.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32_ADAFRUIT_SD_H
|
|
#define __STM32_ADAFRUIT_SD_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include <stdint.h>
|
|
|
|
/** @addtogroup BSP
|
|
* @{
|
|
*/
|
|
#define __IO volatile
|
|
|
|
/** @addtogroup STM32_ADAFRUIT
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup STM32_ADAFRUIT_SD
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief SD status structure definition
|
|
*/
|
|
enum {
|
|
BSP_SD_OK = 0x00,
|
|
MSD_OK = 0x00,
|
|
BSP_SD_ERROR = 0x01,
|
|
BSP_SD_TIMEOUT
|
|
};
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t Reserved1:2; /* Reserved */
|
|
uint16_t DeviceSize:12; /* Device Size */
|
|
uint8_t MaxRdCurrentVDDMin:3; /* Max. read current @ VDD min */
|
|
uint8_t MaxRdCurrentVDDMax:3; /* Max. read current @ VDD max */
|
|
uint8_t MaxWrCurrentVDDMin:3; /* Max. write current @ VDD min */
|
|
uint8_t MaxWrCurrentVDDMax:3; /* Max. write current @ VDD max */
|
|
uint8_t DeviceSizeMul:3; /* Device size multiplier */
|
|
} struct_v1;
|
|
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t Reserved1:6; /* Reserved */
|
|
uint32_t DeviceSize:22; /* Device Size */
|
|
uint8_t Reserved2:1; /* Reserved */
|
|
} struct_v2;
|
|
|
|
/**
|
|
* @brief Card Specific Data: CSD Register
|
|
*/
|
|
typedef struct
|
|
{
|
|
/* Header part */
|
|
uint8_t CSDStruct:2; /* CSD structure */
|
|
uint8_t Reserved1:6; /* Reserved */
|
|
uint8_t TAAC:8; /* Data read access-time 1 */
|
|
uint8_t NSAC:8; /* Data read access-time 2 in CLK cycles */
|
|
uint8_t MaxBusClkFrec:8; /* Max. bus clock frequency */
|
|
uint16_t CardComdClasses:12; /* Card command classes */
|
|
uint8_t RdBlockLen:4; /* Max. read data block length */
|
|
uint8_t PartBlockRead:1; /* Partial blocks for read allowed */
|
|
uint8_t WrBlockMisalign:1; /* Write block misalignment */
|
|
uint8_t RdBlockMisalign:1; /* Read block misalignment */
|
|
uint8_t DSRImpl:1; /* DSR implemented */
|
|
|
|
/* v1 or v2 struct */
|
|
union csd_version {
|
|
struct_v1 v1;
|
|
struct_v2 v2;
|
|
} version;
|
|
|
|
uint8_t EraseSingleBlockEnable:1; /* Erase single block enable */
|
|
uint8_t EraseSectorSize:7; /* Erase group size multiplier */
|
|
uint8_t WrProtectGrSize:7; /* Write protect group size */
|
|
uint8_t WrProtectGrEnable:1; /* Write protect group enable */
|
|
uint8_t Reserved2:2; /* Reserved */
|
|
uint8_t WrSpeedFact:3; /* Write speed factor */
|
|
uint8_t MaxWrBlockLen:4; /* Max. write data block length */
|
|
uint8_t WriteBlockPartial:1; /* Partial blocks for write allowed */
|
|
uint8_t Reserved3:5; /* Reserved */
|
|
uint8_t FileFormatGrouop:1; /* File format group */
|
|
uint8_t CopyFlag:1; /* Copy flag (OTP) */
|
|
uint8_t PermWrProtect:1; /* Permanent write protection */
|
|
uint8_t TempWrProtect:1; /* Temporary write protection */
|
|
uint8_t FileFormat:2; /* File Format */
|
|
uint8_t Reserved4:2; /* Reserved */
|
|
uint8_t crc:7; /* Reserved */
|
|
uint8_t Reserved5:1; /* always 1*/
|
|
|
|
} SD_CSD;
|
|
|
|
/**
|
|
* @brief Card Identification Data: CID Register
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t ManufacturerID; /* ManufacturerID */
|
|
__IO uint16_t OEM_AppliID; /* OEM/Application ID */
|
|
__IO uint32_t ProdName1; /* Product Name part1 */
|
|
__IO uint8_t ProdName2; /* Product Name part2*/
|
|
__IO uint8_t ProdRev; /* Product Revision */
|
|
__IO uint32_t ProdSN; /* Product Serial Number */
|
|
__IO uint8_t Reserved1; /* Reserved1 */
|
|
__IO uint16_t ManufactDate; /* Manufacturing Date */
|
|
__IO uint8_t CID_CRC; /* CID CRC */
|
|
__IO uint8_t Reserved2; /* always 1 */
|
|
} SD_CID;
|
|
|
|
/**
|
|
* @brief SD Card information
|
|
*/
|
|
typedef struct
|
|
{
|
|
SD_CSD Csd;
|
|
SD_CID Cid;
|
|
uint32_t CardCapacity; /*!< Card Capacity */
|
|
uint32_t CardBlockSize; /*!< Card Block Size */
|
|
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
|
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
|
} SD_CardInfo;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM32_ADAFRUIT_SPI_SD_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Block Size
|
|
*/
|
|
#define SD_BLOCK_SIZE 0x200
|
|
|
|
/**
|
|
* @brief SD detection on its memory slot
|
|
*/
|
|
#define SD_PRESENT ((uint8_t)0x01)
|
|
#define SD_NOT_PRESENT ((uint8_t)0x00)
|
|
|
|
#define SD_DATATIMEOUT ((uint32_t)100000000)
|
|
|
|
/**
|
|
* @brief SD Card information structure
|
|
*/
|
|
#define BSP_SD_CardInfo SD_CardInfo
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Macro
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Functions
|
|
* @{
|
|
*/
|
|
uint8_t BSP_SD_Init(void);
|
|
uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
|
|
uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout);
|
|
uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
|
|
uint8_t BSP_SD_GetCardState(void);
|
|
uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo);
|
|
|
|
/* Link functions for SD Card peripheral*/
|
|
void SD_SPI_Slow_Init(void);
|
|
void SD_SPI_Fast_Init(void);
|
|
void SD_IO_Init(void);
|
|
void SD_IO_CSState(uint8_t state);
|
|
void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
|
|
uint8_t SD_IO_WriteByte(uint8_t Data);
|
|
|
|
/* Link function for HAL delay */
|
|
void HAL_Delay(__IO uint32_t Delay);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32_ADAFRUIT_SD_H */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|