mirror of
https://github.com/DarkFlippers/unleashed-firmware
synced 2024-12-27 13:13:07 +00:00
f25d000d53
* ApiHal: console abstraction, change uart baud rate to 230400. Bootloader: drop F5. Furi: prevent thread local output to serial console in stdglue. * ApiHal: take control over system initialization, reorder some subsystems in a hope of fixing USB issues. * Main: cleanup dead code. ISR: take care of HSECSS by our self. USB: leave clock configuration alone. * F6 cube: switch RCC to LL. * Cli: rollback return behavior.
56 lines
3.1 KiB
C
56 lines
3.1 KiB
C
#include <api-hal-resources.h>
|
|
#include "main.h"
|
|
#include <furi.h>
|
|
|
|
const InputPin input_pins[] = {
|
|
{.port = BUTTON_UP_GPIO_Port, .pin = BUTTON_UP_Pin, .key = InputKeyUp, .inverted = true},
|
|
{.port = BUTTON_DOWN_GPIO_Port, .pin = BUTTON_DOWN_Pin, .key = InputKeyDown, .inverted = true},
|
|
{.port = BUTTON_RIGHT_GPIO_Port,
|
|
.pin = BUTTON_RIGHT_Pin,
|
|
.key = InputKeyRight,
|
|
.inverted = true},
|
|
{.port = BUTTON_LEFT_GPIO_Port, .pin = BUTTON_LEFT_Pin, .key = InputKeyLeft, .inverted = true},
|
|
{.port = BUTTON_OK_GPIO_Port, .pin = BUTTON_OK_Pin, .key = InputKeyOk, .inverted = false},
|
|
{.port = BUTTON_BACK_GPIO_Port, .pin = BUTTON_BACK_Pin, .key = InputKeyBack, .inverted = true},
|
|
};
|
|
|
|
const size_t input_pins_count = sizeof(input_pins) / sizeof(InputPin);
|
|
|
|
const GpioPin vibro_gpio = {.port = VIBRO_GPIO_Port, .pin = VIBRO_Pin};
|
|
const GpioPin ibutton_gpio = {.port = iBTN_GPIO_Port, .pin = iBTN_Pin};
|
|
|
|
const GpioPin gpio_cc1101_g0 = {.port = CC1101_G0_GPIO_Port, .pin = CC1101_G0_Pin};
|
|
const GpioPin gpio_rf_sw_0 = {.port = RF_SW_0_GPIO_Port, .pin = RF_SW_0_Pin};
|
|
|
|
const GpioPin gpio_subghz_cs = {.port = CC1101_CS_GPIO_Port, .pin = CC1101_CS_Pin};
|
|
const GpioPin gpio_display_cs = {.port = DISPLAY_CS_GPIO_Port, .pin = DISPLAY_CS_Pin};
|
|
const GpioPin gpio_display_rst = {.port = DISPLAY_RST_GPIO_Port, .pin = DISPLAY_RST_Pin};
|
|
const GpioPin gpio_display_di = {.port = DISPLAY_DI_GPIO_Port, .pin = DISPLAY_DI_Pin};
|
|
const GpioPin gpio_sdcard_cs = {.port = SD_CS_GPIO_Port, .pin = SD_CS_Pin};
|
|
const GpioPin gpio_nfc_cs = {.port = NFC_CS_GPIO_Port, .pin = NFC_CS_Pin};
|
|
|
|
const GpioPin gpio_spi_d_miso = {.port = SPI_D_MISO_GPIO_Port, .pin = SPI_D_MISO_Pin};
|
|
const GpioPin gpio_spi_d_mosi = {.port = SPI_D_MOSI_GPIO_Port, .pin = SPI_D_MOSI_Pin};
|
|
const GpioPin gpio_spi_d_sck = {.port = SPI_D_SCK_GPIO_Port, .pin = SPI_D_SCK_Pin};
|
|
const GpioPin gpio_spi_r_miso = {.port = SPI_R_MISO_GPIO_Port, .pin = SPI_R_MISO_Pin};
|
|
const GpioPin gpio_spi_r_mosi = {.port = SPI_R_MOSI_GPIO_Port, .pin = SPI_R_MOSI_Pin};
|
|
const GpioPin gpio_spi_r_sck = {.port = SPI_R_SCK_GPIO_Port, .pin = SPI_R_SCK_Pin};
|
|
|
|
const GpioPin gpio_ext_pc0 = {.port = GPIOC, .pin = GPIO_PIN_0};
|
|
const GpioPin gpio_ext_pc1 = {.port = GPIOC, .pin = GPIO_PIN_1};
|
|
const GpioPin gpio_ext_pc3 = {.port = GPIOC, .pin = GPIO_PIN_3};
|
|
const GpioPin gpio_ext_pb2 = {.port = GPIOB, .pin = GPIO_PIN_2};
|
|
const GpioPin gpio_ext_pb3 = {.port = GPIOB, .pin = GPIO_PIN_3};
|
|
const GpioPin gpio_ext_pa4 = {.port = GPIOA, .pin = GPIO_PIN_4};
|
|
const GpioPin gpio_ext_pa6 = {.port = GPIOA, .pin = GPIO_PIN_6};
|
|
const GpioPin gpio_ext_pa7 = {.port = GPIOA, .pin = GPIO_PIN_7};
|
|
|
|
const GpioPin gpio_rfid_pull = {.port = RFID_PULL_GPIO_Port, .pin = RFID_PULL_Pin};
|
|
const GpioPin gpio_rfid_carrier_out = {.port = RFID_OUT_GPIO_Port, .pin = RFID_OUT_Pin};
|
|
const GpioPin gpio_rfid_data_in = {.port = RFID_RF_IN_GPIO_Port, .pin = RFID_RF_IN_Pin};
|
|
|
|
const GpioPin gpio_irda_rx = {.port = IR_RX_GPIO_Port, .pin = IR_RX_Pin};
|
|
const GpioPin gpio_irda_tx = {.port = IR_TX_GPIO_Port, .pin = IR_TX_Pin};
|
|
|
|
const GpioPin gpio_usart_tx = {.port = USART1_TX_Port, .pin = USART1_TX_Pin};
|
|
const GpioPin gpio_usart_rx = {.port = USART1_RX_Port, .pin = USART1_RX_Pin};
|